Commit graph

932,869 commits

Author SHA1 Message Date
Marcel Holtmann
f66dc81f44 Bluetooth: Add support for deferring L2CAP connection setup
In order to decide if listening L2CAP sockets should be accept()ed
the BD_ADDR of the remote device needs to be known. This patch adds
a socket option which defines a timeout for deferring the actual
connection setup.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-02-27 06:14:24 +01:00
Marcel Holtmann
bb23c0ab82 Bluetooth: Add support for deferring RFCOMM connection setup
In order to decide if listening RFCOMM sockets should be accept()ed
the BD_ADDR of the remote device needs to be known. This patch adds
a socket option which defines a timeout for deferring the actual
connection setup.

The connection setup is done after reading from the socket for the
first time. Until then writing to the socket returns ENOTCONN.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-02-27 06:14:23 +01:00
Marcel Holtmann
c4f912e155 Bluetooth: Add global deferred socket parameter
The L2CAP and RFCOMM applications require support for authorization
and the ability of rejecting incoming connection requests. The socket
interface is not really able to support this.

This patch does the ground work for a socket option to defer connection
setup. Setting this option allows calling of accept() and then the
first read() will trigger the final connection setup. Calling close()
would reject the connection.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-02-27 06:14:23 +01:00
Marcel Holtmann
d58daf42d2 Bluetooth: Preparation for usage of SOL_BLUETOOTH
The socket option levels SOL_L2CAP, SOL_RFOMM and SOL_SCO are currently
in use by various Bluetooth applications. Going forward the common
option level SOL_BLUETOOTH should be used. This patch prepares the clean
split of the old and new option levels while keeping everything backward
compatibility.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-02-27 06:14:22 +01:00
Victor Shcherbatyuk
91aa35a5aa Bluetooth: Fix issue with return value of rfcomm_sock_sendmsg()
In case of connection failures the rfcomm_sock_sendmsg() should return
an error and not a 0 value.

Signed-off-by: Victor Shcherbatyuk <victor.shcherbatyuk@tomtom.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-02-27 06:14:21 +01:00
Steven Rostedt
85a2f9b46f tracing: use pointer error returns for __tracing_open
Impact: fix compile warning and clean up

When I first wrote __tracing_open, instead of passing the error
code via the ERR_PTR macros, I lazily used a separate parameter
to hold the return for errors.

When Frederic Weisbecker updated that function, he used the Linux
kernel ERR_PTR for the returns. This caused the parameter return
to possibly not be initialized on error. gcc correctly pointed this
out with a warning.

This patch converts the entire function to use the Linux kernel
ERR_PTR macro methods.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-27 00:12:38 -05:00
Randy Dunlap
9b58027bc2 net: fix hp-plus build error
hp-plus needs to call __alloc_eip_netdev() instead of
__alloc_ei_netdev() since it is linked with 8390p.o.

Fixes this build error:
ERROR: "__alloc_ei_netdev" [drivers/net/hp-plus.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26 21:02:19 -08:00
Steven Rostedt
d8e83d26b5 tracing: add protection around open use of current_tracer
Impact: fix to possible race conditions

There's some uses of current_tracer that is not protected by the
trace_types_lock. There is a small chance that a sysadmin changes
the tracer while the current_tracer is being referenced.

If the race is hit, it is unlikely to cause any harm since the
tracers are constant and are not freed. But some strang side
effects may occur.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-26 23:55:58 -05:00
Steven Rostedt
577b785f55 tracing: add tracer dependent options to options directory
This patch adds the tracer dependent options dynamically to the
options directory when the tracer is activated. These options are
removed when the tracer is deactivated.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-26 23:43:05 -05:00
Nicolas Pitre
5b99d53483 [ARM] Kirkwood: register internal devices in a common place
The RTC and the two XOR engines are internal to the chip, and therefore
always available since they don't depend on a particular board layout.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-02-26 22:55:59 -05:00
Steven Rostedt
a825907507 tracing: add options directory and core option files
This patch creates an options directory in the debugfs, that contains
the available tracing options. These files contain 1 or 0, where 1
is the option is enabled and 0 it is disabled.

Simply echoing in 1 will enable the option and 0 will disable it.
This patch only contains the core options, not the tracer options.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-26 22:22:46 -05:00
Nicolas Pitre
249cbfa3f5 [ARM] Kirkwood: remove unneeded includes from board setup files
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-02-26 21:35:59 -05:00
Nicolas Pitre
3c2613dbbc [ARM] Kirkwood: add NAND support to the DB88F6281 board
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-02-26 21:19:51 -05:00
Serge E. Hallyn
454804ab03 keys: make procfiles per-user-namespace
Restrict the /proc/keys and /proc/key-users output to keys
belonging to the same user namespace as the reading task.

We may want to make this more complicated - so that any
keys in a user-namespace which is belongs to the reading
task are also shown.  But let's see if anyone wants that
first.

Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-02-27 12:35:15 +11:00
Serge E. Hallyn
2ea190d0a0 keys: skip keys from another user namespace
When listing keys, do not return keys belonging to the
same uid in another user namespace.  Otherwise uid 500
in another user namespace will return keyrings called
uid.500 for another user namespace.

Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-02-27 12:35:12 +11:00
Serge E. Hallyn
8ff3bc3138 keys: consider user namespace in key_permission
If a key is owned by another user namespace, then treat the
key as though it is owned by both another uid and gid.

Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-02-27 12:35:09 +11:00
Serge E. Hallyn
1d1e97562e keys: distinguish per-uid keys in different namespaces
per-uid keys were looked by uid only.  Use the user namespace
to distinguish the same uid in different namespaces.

This does not address key_permission.  So a task can for instance
try to join a keyring owned by the same uid in another namespace.
That will be handled by a separate patch.

Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-02-27 12:35:06 +11:00
Uwe Bugla
b391d0f08f V4L/DVB (10696): Remove outdated README for the flexcop-driver
This patch removes an outdated README for the flexcop-driver.

Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-26 22:29:19 -03:00
Uwe Bugla
f5a3258335 V4L/DVB (10695): Update Technisat card documentation
Fixes for documentation of Technisat-based cards

Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-26 22:29:18 -03:00
Patrick Boettcher
382c5546d6 V4L/DVB (10694): [PATCH] software IRQ watchdog for Flexcop B2C2 DVB PCI cards
With (some) Technisat cards you cannot run multiple DVB applications
in parallel and switch the channel at the same time.

There seems to be a problem on the interfaces or even inside the flexcop-device
that can't handle interruption on the streaming interface.

This patch adds a watchdog to check whether data is supposed to come in
(streaming PIDs are requested) and if no data is seen within 400ms (default) it
resets the streaming/pid-filtering hardware.

This patch is urgently needed to support the rev 2.8 of the hardware and solves
problem occassionally seen on older hardware.

Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-26 22:29:18 -03:00
Guennadi Liakhovetski
0ad675eb45 V4L/DVB (10663): soc-camera: fix S_CROP breakage on PXA and SuperH
Recent format-negotiation patches caused S_CROP breakage in pxa_camera.c
and sh_mobile_ceu_camera.c drivers, fix it.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-26 22:29:18 -03:00
Nicola Soranzo
7662b00c37 V4L/DVB (10659): em28xx: register device to soundcard for sysfs
As explained in "Writing an ALSA driver" (T. Iwai), audio drivers should
set the struct device for the card before registering the card instance.
This will add the correct /sys/class/sound/cardN/device symlink, so HAL
can see the device and ConsoleKit sets its ACL permissions for the
logged-in user.

For em28xx audio capture cards found e.g. in Hauppauge WinTV-HVR-900 (R2),
this patch fixes errors like:

ALSA lib pcm_hw.c:1429:(_snd_pcm_hw_open) Invalid value for card
Error opening audio: Permission denied

when running mplayer as a normal user.

Signed-off-by: Nicola Soranzo <nsoranzo@tiscali.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-26 22:29:18 -03:00
Nicolas Pitre
8235ee009c [ARM] Kirkwood: SDIO driver registration for DB6281 and RD6281
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-02-26 20:22:26 -05:00
Ben Dooks
41ba41d7c7 [ARM] S3C64XX: Fix USB host clock mux list
The clock list for the USB host bus clock was in the wrong order,
move clk_48m to position 0.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-02-26 23:25:51 +00:00
Ben Dooks
19c5957081 [ARM] S3C64XX: Fix name of USB host clock.
The usb-host-bus clock should be named usb-bus-host.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-02-26 23:25:51 +00:00
Ben Dooks
4271c3bd46 [ARM] S3C64XX: Rename IRQ_UHOST to IRQ_USBH
The USB OHCI host device expects the IRQ definition to be named
IRQ_USBH, so rename the S3C64XX IRQ header to match.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-02-26 23:25:51 +00:00
Mark Brown
24d4076734 [ARM] S3C64XX: Do gpiolib configuration earlier
arch_initcall() runs after the machine init function which means that
any configuration of GPIO pins must currently be done later on, for
example in callbacks from drivers. Move the initialisation earlier in
order to allow machines to configure GPIOs directly in their init
functions rather than having to have a callback invoked later on.

Some other ARM platforms use this method. Other solutions for this
include providing a special interface for setting up GPIOs en masse,
adding callbacks to do the GPIO configuration from devices and doing
the GPIO configuration implicitly.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-02-26 23:21:50 +00:00
Mark Brown
8bd8dbdf37 [ARM] S3C64XX: Staticise s3c64xx_init_irq_eint()
It's an initcall and does not need to be exported.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-02-26 23:21:50 +00:00
Mark Brown
027191a8c6 [ARM] SMDK6410: Declare iodesc table static
Shuts up a warning.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-02-26 23:21:49 +00:00
Mark Brown
7789747977 [ARM] SMDK6410: Correct I2C device name for WM8580
The WM8580 driver registers itself as "wm8580" rather than "WM8580".

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-02-26 23:21:49 +00:00
Mark Brown
789b4ad36c [ARM] S3C64XX: Fix section mismatch for s3c64xx_register_clocks()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-02-26 23:16:38 +00:00
Ben Dooks
28fd2d397b [ARM] S3C64XX: Set GPIO pin when select IRQ_EINT type
Set the GPIO pin mode to external interrupt when configuring
an IRQ_EINT's IRQ type.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-02-26 23:08:59 +00:00
Linus Torvalds
221be177e6 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
  [MTD] [MAPS] Remove MODULE_DEVICE_TABLE() from ck804rom driver.
  [JFFS2] fix mount crash caused by removed nodes
  [JFFS2] force the jffs2 GC daemon to behave a bit better
  [MTD] [MAPS] blackfin async requires complex mappings
  [MTD] [MAPS] blackfin: fix memory leak in error path
  [MTD] [MAPS] physmap: fix wrong free and del_mtd_{partition,device}
  [MTD] slram: Handle negative devlength correctly
  [MTD] map_rom has NULL erase pointer
  [MTD] [LPDDR] qinfo_probe depends on lpddr
2009-02-26 14:45:57 -08:00
Linus Torvalds
d499811503 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: add IO error check in ocfs2_get_sector()
  ocfs2: set gap to seperate entry and value when xattr in bucket
  ocfs2: lock the metaecc process for xattr bucket
  ocfs2: Use the right access_* method in ctime update of xattr.
  ocfs2/dlm: Make dlm_assert_master_handler() kill itself instead of the asserter
  ocfs2/dlm: Use ast_lock to protect ast_list
  ocfs2: Cleanup the lockname print in dlmglue.c
  ocfs2/dlm: Retract fix for race between purge and migrate
  ocfs2: Access and dirty the buffer_head in mark_written.
2009-02-26 14:45:42 -08:00
Linus Torvalds
392b8e47ba Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/44x: Fix address decoding setup of PCI 2.x cells
2009-02-26 14:45:25 -08:00
Linus Torvalds
4bdc1b9650 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: AMD 813x B2 devices do not need boot interrupt quirk
  PCI: Enable PCIe AER only after checking firmware support
  PCI: pciehp: Handle interrupts that happen during initialization.
  PCI: don't enable too many HT MSI mappings
  PCI: add some sysfs ABI docs
  PCI quirk: enable MSI on 8132
2009-02-26 14:43:42 -08:00
Benjamin Herrenschmidt
1ac00cc213 powerpc/44x: Fix address decoding setup of PCI 2.x cells
The PCI 2.x cells used on some 44x SoCs only let us configure the decode
for the low 32-bit of the incoming PLB addresses. The top 4 bits (this
is a 36-bit bus) are hard wired to different values depending on the
specific SoC in use. Our code used to work "by accident" until I added
support for the ISA memory holes and while at it added more validity
checking of the addresses.

This patch should bring it back to working condition. It still relies
on the device-tree being correct but that's somewhat a pre-requisite
for anything to work anyway.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-02-27 09:30:17 +11:00
Stefan Assmann
bbe194433b PCI: AMD 813x B2 devices do not need boot interrupt quirk
Turns out that the new AMD 813x devices do not need the
quirk_disable_amd_813x_boot_interrupt quirk to be run on them.  If it
is, no interrupts are seen on the PCI-X adapter.

From: Stefan Assmann <sassmann@novell.com>
Reported-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Tested-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jesse Barnes <jbarnes@hobbes.lan>
2009-02-26 14:08:09 -08:00
Ingo Molnar
ba1d755a36 fix warning in arch/x86/kernel/cpu/intel_cacheinfo.c
fix this warning:

  arch/x86/kernel/cpu/intel_cacheinfo.c:139: warning: ‘k8_nb_id’ defined but not used
  arch/x86/kernel/cpu/intel_cacheinfo.c:527: warning: ‘free_cache_attributes’ defined but not used
  arch/x86/kernel/cpu/intel_cacheinfo.c:538: warning: ‘detect_cache_attributes’ defined but not used

Unused variables in the !CONFIG_SYSCTL case.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26 22:39:12 +01:00
Guennadi Liakhovetski
6e1588cbd8 i.MX31: framebuffer driver
This is a framebuffer driver for i.MX31 SoCs. It only supports synchronous
displays, vertical panning supported, no overlay support.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-02-26 14:00:58 -07:00
Dan Williams
1febd91acf Revert "i.MX31: framebuffer driver"
This reverts commit 86528da229.

This version of the patch was tab-to-space corrupted before
application.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-02-26 13:58:37 -07:00
Peter Zijlstra
8325d9c09d sched_clock: cleanups
- remove superfluous checks in __update_sched_clock()
- skip sched_clock_tick() for sched_clock_stable
- reinstate the simple !HAVE_UNSTABLE_SCHED_CLOCK code to please the bloatwatch

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26 21:56:07 +01:00
Ingo Molnar
5d0859cef2 Merge branch 'sched/clock' into tracing/ftrace
Conflicts:
	kernel/sched_clock.c
2009-02-26 21:21:59 +01:00
Ingo Molnar
83ce400928 x86: set X86_FEATURE_TSC_RELIABLE
If the TSC is constant and non-stop, also set it reliable.

(We will turn this off in DMI quirks for multi-chassis systems)

The performance number on a 16-way Nehalem system running
32 tasks that context-switch between each other is significant:

   sched_clock_stable=0		sched_clock_stable=1
   ....................         ....................
   22.456925 million/sec        24.306972 million/sec   [+8.2%]

lmbench's "lat_ctx -s 0 2" goes from 0.63 microseconds to
0.59 microseconds - a 6.7% increase in context-switching
performance.

Perfstat of 1 million pipe context switches between two tasks:

 Performance counter stats for './pipe-test-1m':

       [before]           [after]
   ............      ............
   37621.421089      36436.848378    task clock ticks     (msecs)

              0                 0    CPU migrations       (events)
        2000274           2000189    context switches     (events)
            194               193    pagefaults           (events)
     8433799643        8171016416    CPU cycles           (events) -3.21%
     8370133368        8180999694    instructions         (events) -2.31%
        4158565           3895941    cache references     (events) -6.74%
          44312             46264    cache misses         (events)

    2349.287976       2279.362465    wall-time            (msecs)  -3.06%

The speedup comes straight from the reduction in the instruction
count. sched_clock_cpu() got simpler and the whole workload thus
executes faster.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26 21:20:25 +01:00
Ingo Molnar
b342501cd3 sched: allow architectures to specify sched_clock_stable
Allow CONFIG_HAVE_UNSTABLE_SCHED_CLOCK architectures to still specify
that their sched_clock() implementation is reliable.

This will be used by x86 to switch on a faster sched_clock_cpu()
implementation on certain CPU types.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26 21:20:22 +01:00
Kiran Divekar
ab65f649d3 libertas: fix misuse of netdev_priv() and dev->ml_priv
The mesh and radiotap interfaces need to use the same private data as
the main wifi interface.  If the main wifi interface uses netdev_priv(),
but the other interfaces ->ml_priv, there's no way to figure out where
the private data actually is in the WEXT handlers and netdevice
callbacks.  So make everything use ->ml_priv.

Fixes botched netdev_priv() conversion introduced by "netdevice
libertas: Fix directly reference of netdev->priv", though admittedly
libertas' use of ->priv was somewhat "special".

Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Tested-by: Chris Ball <cjb@laptop.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-26 15:15:44 -05:00
Kyle McMartin
f6be37fdc6 x86: enable DMAR by default
Now that the obvious bugs have been worked out, specifically
the iwlagn issue, and the write buffer errata, DMAR should be safe
to turn back on by default. (We've had it on since those patches were
first written a few weeks ago, without any noticeable bug reports
(most have been due to the dma-api debug patchset.))

Signed-off-by: Kyle McMartin <kyle@redhat.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26 20:59:47 +01:00
David Woodhouse
b50be33e42 [MTD] [MAPS] Remove MODULE_DEVICE_TABLE() from ck804rom driver.
We really don't want the BIOS flash mapping hacks to get automatically
loaded.

No idea why it isn't using pci_register_driver() though -- that should
be fine... and is even _present_ but disabled by #if 0.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-02-27 04:52:45 +09:00
wengang wang
28d57d4377 ocfs2: add IO error check in ocfs2_get_sector()
Check for IO error in ocfs2_get_sector().

Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-02-26 11:51:12 -08:00
Tiger Yang
4442f51826 ocfs2: set gap to seperate entry and value when xattr in bucket
This patch set a gap (4 bytes) between xattr entry and
name/value when xattr in bucket. This gap use to seperate
entry and name/value when a bucket is full. It had already
been set when xattr in inode/block.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-02-26 11:51:11 -08:00