Commit graph

932,869 commits

Author SHA1 Message Date
Ingo Molnar
ecc25fbd6b Merge branches 'x86/apic', 'x86/defconfig', 'x86/memtest', 'x86/mm' and 'linus' into x86/core 2009-02-26 06:31:32 +01:00
Ingo Molnar
801c0be814 Merge branches 'x86/urgent' and 'x86/pat' into x86/core
Conflicts:
	arch/x86/include/asm/pat.h
2009-02-26 06:31:23 +01:00
Ingo Molnar
13b2eda64d Merge branch 'x86/urgent' into x86/core
Conflicts:
	arch/x86/mach-voyager/voyager_smp.c
2009-02-26 06:30:42 +01:00
Paul Mackerras
742bd95ba9 perfcounters/powerpc: Add support for POWER5 processors
This adds the back-end for the PMU on the POWER5 processor.  This knows
how to use the fixed-function PMC5 and PMC6 (instructions completed and
run cycles).  Unlike POWER6, PMC5/6 obey the freeze conditions and can
generate interrupts, so their use doesn't impose any extra restrictions.

POWER5+ is different and is not supported by this patch.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-02-26 15:36:48 +11:00
Ingo Molnar
0093b108a6 Merge branch 'tj-percpu' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc into core/percpu 2009-02-26 04:22:20 +01:00
Paul E. McKenney
a682604838 rcu: Teach RCU that idle task is not quiscent state at boot
This patch fixes a bug located by Vegard Nossum with the aid of
kmemcheck, updated based on review comments from Nick Piggin,
Ingo Molnar, and Andrew Morton.  And cleans up the variable-name
and function-name language.  ;-)

The boot CPU runs in the context of its idle thread during boot-up.
During this time, idle_cpu(0) will always return nonzero, which will
fool Classic and Hierarchical RCU into deciding that a large chunk of
the boot-up sequence is a big long quiescent state.  This in turn causes
RCU to prematurely end grace periods during this time.

This patch changes the rcutree.c and rcuclassic.c rcu_check_callbacks()
function to ignore the idle task as a quiescent state until the
system has started up the scheduler in rest_init(), introducing a
new non-API function rcu_idle_now_means_idle() to inform RCU of this
transition.  RCU maintains an internal rcu_idle_cpu_truthful variable
to track this state, which is then used by rcu_check_callback() to
determine if it should believe idle_cpu().

Because this patch has the effect of disallowing RCU grace periods
during long stretches of the boot-up sequence, this patch also introduces
Josh Triplett's UP-only optimization that makes synchronize_rcu() be a
no-op if num_online_cpus() returns 1.  This allows boot-time code that
calls synchronize_rcu() to proceed normally.  Note, however, that RCU
callbacks registered by call_rcu() will likely queue up until later in
the boot sequence.  Although rcuclassic and rcutree can also use this
same optimization after boot completes, rcupreempt must restrict its
use of this optimization to the portion of the boot sequence before the
scheduler starts up, given that an rcupreempt RCU read-side critical
section may be preeempted.

In addition, this patch takes Nick Piggin's suggestion to make the
system_state global variable be __read_mostly.

Changes since v4:

o	Changes the name of the introduced function and variable to
	be less emotional.  ;-)

Changes since v3:

o	WARN_ON(nr_context_switches() > 0) to verify that RCU
	switches out of boot-time mode before the first context
	switch, as suggested by Nick Piggin.

Changes since v2:

o	Created rcu_blocking_is_gp() internal-to-RCU API that
	determines whether a call to synchronize_rcu() is itself
	a grace period.

o	The definition of rcu_blocking_is_gp() for rcuclassic and
	rcutree checks to see if but a single CPU is online.

o	The definition of rcu_blocking_is_gp() for rcupreempt
	checks to see both if but a single CPU is online and if
	the system is still in early boot.

	This allows rcupreempt to again work correctly if running
	on a single CPU after booting is complete.

o	Added check to rcupreempt's synchronize_sched() for there
	being but one online CPU.

Tested all three variants both SMP and !SMP, booted fine, passed a short
rcutorture test on both x86 and Power.

Located-by: Vegard Nossum <vegard.nossum@gmail.com>
Tested-by: Vegard Nossum <vegard.nossum@gmail.com>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26 04:08:14 +01:00
Mark Nelson
f72b728bf1 powerpc: Fix 64bit __copy_tofrom_user() regression
This fixes a regression introduced by commit
a4e22f02f5 ("powerpc: Update 64bit
__copy_tofrom_user() using CPU_FTR_UNALIGNED_LD_STD").

The same bug that existed in the 64bit memcpy() also exists here so fix
it here too. The fix is the same as that applied to memcpy() with the
addition of fixes for the exception handling code required for
__copy_tofrom_user().

This stops us reading beyond the end of the source region we were told
to copy.

Signed-off-by: Mark Nelson <markn@au1.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-26 14:02:54 +11:00
Mark Nelson
e423b9ecd6 powerpc: Fix 64bit memcpy() regression
This fixes a regression introduced by commit
25d6e2d7c5 ("powerpc: Update 64bit memcpy()
using CPU_FTR_UNALIGNED_LD_STD").

This commit allowed CPUs that have the CPU_FTR_UNALIGNED_LD_STD CPU
feature bit present to do the memcpy() with unaligned load doubles. But,
along with this came a bug where our final load double would read bytes
beyond a page boundary and into the next (unmapped) page. This was caught
by enabling CONFIG_DEBUG_PAGEALLOC,

The fix was to read only the number of bytes that we need to store rather
than reading a full 8-byte doubleword and storing only a portion of that.

In order to minimise the amount of existing code touched we use the
original do_tail for the src_unaligned case.

Below is an example of the regression, as reported by Sachin Sant:

Unable to handle kernel paging request for data at address 0xc00000003f380000
Faulting instruction address: 0xc000000000039574
cpu 0x1: Vector: 300 (Data Access) at [c00000003baf3020]
    pc: c000000000039574: .memcpy+0x74/0x244
    lr: d00000000244916c: .ext3_xattr_get+0x288/0x2f4 [ext3]
    sp: c00000003baf32a0
   msr: 8000000000009032
   dar: c00000003f380000
 dsisr: 40000000
  current = 0xc00000003e54b010
  paca    = 0xc000000000a53680
    pid   = 1840, comm = readahead
enter ? for help
[link register   ] d00000000244916c .ext3_xattr_get+0x288/0x2f4 [ext3]
[c00000003baf32a0] d000000002449104 .ext3_xattr_get+0x220/0x2f4 [ext3]
(unreliab
le)
[c00000003baf3390] d00000000244a6e8 .ext3_xattr_security_get+0x40/0x5c [ext3]
[c00000003baf3400] c000000000148154 .generic_getxattr+0x74/0x9c
[c00000003baf34a0] c000000000333400 .inode_doinit_with_dentry+0x1c4/0x678
[c00000003baf3560] c00000000032c6b0 .security_d_instantiate+0x50/0x68
[c00000003baf35e0] c00000000013c818 .d_instantiate+0x78/0x9c
[c00000003baf3680] c00000000013ced0 .d_splice_alias+0xf0/0x120
[c00000003baf3720] d00000000243e05c .ext3_lookup+0xec/0x134 [ext3]
[c00000003baf37c0] c000000000131e74 .do_lookup+0x110/0x260
[c00000003baf3880] c000000000134ed0 .__link_path_walk+0xa98/0x1010
[c00000003baf3970] c0000000001354a0 .path_walk+0x58/0xc4
[c00000003baf3a20] c000000000135720 .do_path_lookup+0x138/0x1e4
[c00000003baf3ad0] c00000000013645c .path_lookup_open+0x6c/0xc8
[c00000003baf3b70] c000000000136780 .do_filp_open+0xcc/0x874
[c00000003baf3d10] c0000000001251e0 .do_sys_open+0x80/0x140
[c00000003baf3dc0] c00000000016aaec .compat_sys_open+0x24/0x38
[c00000003baf3e30] c00000000000855c syscall_exit+0x0/0x40

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-26 14:02:53 +11:00
Michael Neuling
49f297f8df powerpc: Fix load/store float double alignment handler
When we introduced VSX, we changed the way FPRs are stored in the
thread_struct.  Unfortunately we missed the load/store float double
alignment handler code when updating how we access FPRs in the
thread_struct.

Below fixes this and merges the little/big endian case.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-26 14:02:53 +11:00
Ingo Molnar
f4abfb8d0d Merge branch 'tip/tracing/ftrace' of ssh://master.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace 2009-02-26 03:48:44 +01:00
Ingo Molnar
e36b1e136a Merge branches 'tracing/ftrace', 'tracing/hw-branch-tracing' and 'linus' into tracing/core 2009-02-26 03:47:27 +01:00
Steven Rostedt
3cdfdf91fc tracing: wrap arguments with PARAMS
Peter Zijlstra warned that TPPROTO and TPARGS might become something
other than a simple copy of itself. To prevent this from having
side effects in the TRACE_FORMAT macro in tracepoint.h, we add a
PARAMS() macro to be defined as just a wrapper.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-25 21:44:26 -05:00
Steven Rostedt
eef62a6826 tracing: rename DEFINE_TRACE_FMT to just TRACE_FORMAT
There's been a bit confusion to whether DEFINE/DECLARE_TRACE_FMT should
be a DEFINE or a DECLARE. Ingo Molnar suggested simply calling it
TRACE_FORMAT.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-25 21:44:22 -05:00
Ingo Molnar
13093cb0e5 gpu/drm, x86, PAT: PAT support for io_mapping_*, export symbols for modules
Impact: build fix

 ERROR: "reserve_io_memtype_wc" [drivers/gpu/drm/i915/i915.ko] undefined!
 ERROR: "free_io_memtype" [drivers/gpu/drm/i915/i915.ko] undefined!

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26 03:43:53 +01:00
Tejun Heo
e317603694 percpu: fix too low alignment restriction on UP
UP __alloc_percpu() triggered WARN_ON_ONCE() if the requested
alignment is larger than that of unsigned long long, which is too
small for all the cacheline aligned allocations.  Bump it up to
SMP_CACHE_BYTES which kmalloc allocations generally guarantee.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
2009-02-26 10:54:17 +09:00
Takashi Iwai
f872a9194c ALSA: hda - Clean up / fix quirk for Sony laptops with ALC262
Clean up / fix quirk entries for Sony laptops with ALC262 codec
using NSD_PCI_QUIRK_MASK().

This also fixes the kernel bug #12780
	http://bugme.linux-foundation.org/show_bug.cgi?id=12780

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-26 00:57:01 +01:00
Linus Torvalds
169d418b12 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: emu10k1 - Fix digital/analog switch on audigy2 ZS
  ALSA: hda - Quirk for Acer Aspire 6530G
  ALSA: hda - add another MacBook Pro 3,1 SSID
  ALSA: fix excessive background noise introduced by OSS emulation rate shrink
  ALSA: aw2: do not grab every saa7146 based device
  ALSA: hda - Fix parse of init_verbs sysfs entry
  ALSA: pcxhr.h replace signed one-bit bitfields
2009-02-25 15:16:18 -08:00
Linus Torvalds
70c01f01a2 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Don't go beyond iosapic_intr_info's arraysize
  [IA64] Do not go beyond ARRAY_SIZE of unw.hash
  [IA64] enable setting DMAR on by default
2009-02-25 15:14:37 -08:00
Linus Torvalds
c4eb1bf63f Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] pata_legacy: for VLB 32bit PIO don't try tricks with slop
  [libata] pata_amd: program FIFO
  sata_mv: fix SoC interrupt breakage
  pata_it821x: resume from hibernation fails with RAID volume
2009-02-25 15:12:48 -08:00
Roland Dreier
9206dff157 IB: Remove sysfs files before unregistering device
Move the ib_device_unregister_sysfs() call from ib_dealloc_device() to
ib_unregister_device().  The old code allows device unregister to
proceed even if some sysfs files are open, which leaves a window where
userspace can open a file before a device is removed but then end up
reading the file after the device is removed, which leads to various
kernel crashes either because the device data structure is freed or
because the low-level driver code is gone after module removal.

By not returning from ib_unregister_device() until after all sysfs
entries are removed, we make sure that data structures and/or module
code is not freed until after all sysfs access is done.

Reported-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-02-25 13:27:46 -08:00
Alan Cox
c55af1f5ab [libata] pata_legacy: for VLB 32bit PIO don't try tricks with slop
These devices are generally used with ATA anyway and it seems that some
ATAPI will need us to issue the right number of words.  Therefore as we
can't switch mid burst on VLB devices we should only use 32bit I/O for
suitable block sizes.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-25 15:30:23 -05:00
Alan Cox
c48052cc36 [libata] pata_amd: program FIFO
With 32bit PIO we can use the posted write buffers, but only for 32bit I/O
cycles.  This means we must disable the FIFO for ATAPI where a final 16bit
cycle may occur.

Rework the FIFO logic so that we disable the FIFO then selectively
re-enable it when we set the timings on AMD devices.  Also fix a case
where we scribbled on PCI config 0x41 of Nvidia chips when we shouldn't.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-25 15:30:16 -05:00
Mark Lord
6be96ac15e sata_mv: fix SoC interrupt breakage
For some reason, sata_mv doesn't clear interrupt status during init
when it's running on an SoC host adapter.  If the bootloader has
touched the SATA controller before starting Linux, Linux can end up
enabling the SATA interrupt with events pending, which will cause the
interrupt to be marked as spurious and then be disabled, which then
breaks all further accesses to the controller.

This patch makes the SoC path clear interrupt status on init like in
the non-SoC case.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-25 15:25:35 -05:00
Ondrej Zary
7ba07d16bd pata_it821x: resume from hibernation fails with RAID volume
Hibernation didn't work for me since I started to use IT8212 controller.
I did some debugging (booting with no_console_suspend init=/bin/sh).

Found that resume fails (2.6.28) with "serial number mismatch 'some
garbage' != 'some other garbage'" and "revalidation failed" messages.
That's because the controller firmware fills different serial number in
the IDENTIFY every boot.

The patch below fixes the resume simply clearing the serial number.  The
proper fix would be probably to fill in the serial number of the RAID
volume instead.  I assume that there must be something like that stored on
the drives but I don't know where.

Fix resume on pata_it821x RAID volume by clearing the serial number in
IDENTIFY data, which is otherwise different on each boot.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-25 15:22:44 -05:00
Linus Torvalds
a36e4f0cab Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: fix refcounting in device drivers
  ide-cd: document capacity hack
  it821x: remove dead URL
  atiixp: fix missing parentheses
  amd74xx: device/vendor confusion
  ide: ide.c 'clear' fix, update "ide=nodma" documentation
2009-02-25 12:22:06 -08:00
Hugh Dickins
0b0a0806b0 shmem: fix shared anonymous accounting
Each time I exit Firefox, /proc/meminfo's Committed_AS goes down almost
400 kB: OVERCOMMIT_NEVER would be allowing overcommits it should
prohibit.

Commit fc8744adc8 "Stop playing silly
games with the VM_ACCOUNT flag" changed shmem_file_setup() to set the
shmem file's VM_ACCOUNT flag according to VM_NORESERVE not being set in
the vma flags; but did so only _after_ the shmem_acct_size(flags, size)
call which is expected to pre-account a shared anonymous object.

It's all clearer if we switch shmem.c over to use VM_NORESERVE
throughout in place of !VM_ACCOUNT.

But I very nearly sent in a patch which mistakenly removed the
accounting from tmpfs files: shmem_get_inode()'s memset was good for not
setting VM_ACCOUNT, but now it needs to set VM_NORESERVE.

Rather than setting that by default, then perhaps clearing it again in
shmem_file_setup(), let's pass it as a flag to shmem_get_inode(): that
allows us to remove the #ifdef CONFIG_SHMEM from shmem_file_setup().

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-25 12:21:42 -08:00
Roel Kluin
5b5923975f [IA64] Don't go beyond iosapic_intr_info's arraysize
vi arch/ia64/kernel/iosapic.c +142
static struct iosapic_intr_info {
	...
} iosapic_intr_info[NR_IRQS];

But at line 510 we have:
	for (i = 0; i <= NR_IRQS; i++) {

s/<=/</

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-02-25 11:50:53 -08:00
Roel Kluin
aa2f63c954 [IA64] Do not go beyond ARRAY_SIZE of unw.hash
static struct {

... :114
        unsigned short hash[UNW_HASH_SIZE];

... :2152
	for (index = 0; index <= UNW_HASH_SIZE; ++index) {

This is a bug, isn't it?

s/<=/</

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-02-25 11:48:04 -08:00
Kyle McMartin
6b1ff036d4 [IA64] enable setting DMAR on by default
The previous commit which introduced the DMAR_DEFAULT_ON setting in
drivers/pci/dmar.c neglected to add the ability for ia64 to enable
the IOMMU by default. Rectify that mistake, doh!

Signed-off-by: Kyle McMartin <kyle@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-02-25 11:40:27 -08:00
Bartlomiej Zolnierkiewicz
8fed436841 ide: fix refcounting in device drivers
During host driver module removal del_gendisk() results in a final
put on drive->gendev and freeing the drive by drive_release_dev().

Convert device drivers from using struct kref to use struct device
so device driver's object holds reference on ->gendev and prevents
drive from prematurely going away.

Also fix ->remove methods to not erroneously drop reference on a
host driver by using only put_device() instead of ide*_put().

Reported-by: Stanislaw Gruszka <stf_xl@wp.pl>
Tested-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-25 20:28:24 +01:00
Bartlomiej Zolnierkiewicz
d3dd7107f4 ide-cd: document capacity hack
Just copy the comment from drivers/scsi/sr.c::sr_done()
(from which the capacity hack has been originated).

Cc: Borislav Petkov <petkovbb@gmail.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-25 20:28:23 +01:00
Bartlomiej Zolnierkiewicz
f38344b0a0 it821x: remove dead URL
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-25 20:28:22 +01:00
Roel Kluin
f76bee16fc atiixp: fix missing parentheses
Fix missing parentheses so PIO/DMA timings for master device on the
second channel are programmed correctly (IOW "8 0 24 16" offset values
should be used instead of the current "8 0 16 16").

[ The bug went unnoticed because after PIO/DMA timings get programmed
  incorrectly for the third device they are overwritten with timings
  for the fourth device and since BIOS should also program timings for
  the third device everything should work fine until suspend/resume
  cycle or user requested transfer mode changes. ]

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
[bart: update patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-25 20:28:22 +01:00
Roel Kluin
43a12216d3 amd74xx: device/vendor confusion
Device and vendor ids were confused

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-25 20:28:22 +01:00
David Fries
0af80c04e2 ide: ide.c 'clear' fix, update "ide=nodma" documentation
Documentation/kernel-parameters.txt
- ide=nodma is no longer valid.

drivers/ide/Kconfig
- The module is ide-core.ko not ide.

drivers/ide/ide.c
- It took me a while to figure out what the arguments %d.%d:%d to nodma
  module parameter ment, so I added a comment to each.
- Added a comment to each of the sscanf lines.
- There is a bug, if j is 0 it would previously clear all the other bits
  except the current device, changed in three different places.
  mask &= (1 << i) should be mask &= ~(1 << i).

Signed-off-by: David Fries <david@fries.net>
[bart: s/disk/device/ in ide.c, beautify patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-25 20:28:21 +01:00
Jeremy Fitzhardinge
55d8085671 xen: disable interrupts early, as start_kernel expects
This avoids a lockdep warning from:
	if (DEBUG_LOCKS_WARN_ON(unlikely(!early_boot_irqs_enabled)))
		return;
in trace_hardirqs_on_caller();

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Cc: Xen-devel <xen-devel@lists.xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:51:57 +01:00
Linus Torvalds
c15d8a6499 Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: convert DRM_ERROR to DRM_DEBUG in phys object pwrite path
  drm/i915: make hw page ioremap use ioremap_wc
  drm: edid revision 0 is valid
  drm: Correct unbalanced drm_vblank_put() during mode setting.
  drm: disable encoders before re-routing them
  drm: Fix ordering of bit fields in EDID structure leading huge vsync values.
  drm: Fix shifts of EDID vsync offset/width fields.
  drm/i915: handle bogus VBT panel timing
  drm/i915: remove PLL debugging messages
2009-02-25 09:49:30 -08:00
Ingo Molnar
39854fe8c1 time: ntp: clean up second_overflow()
Impact: cleanup, no functionality changed

The 'time_adj' local variable is named in a very confusing
way because it almost shadows the 'time_adjust' global
variable - which is used in this same function.

Rename it to 'delta' - to make them stand apart more clearly.

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2545	    114	    144	   2803	    af3	ntp.o.before
   2545	    114	    144	   2803	    af3	ntp.o.after

md5:
   1bf0b3be564512279ba7cee299d1d2be  ntp.o.before.asm
   1bf0b3be564512279ba7cee299d1d2be  ntp.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:17 +01:00
Ingo Molnar
069569e025 time: ntp: simplify ntp_tick_adj calculations
Impact: micro-optimization

Convert the (internal) ntp_tick_adj value we store from unscaled
units to scaled units. This is a constant that we never modify,
so scaling it up once during bootup is enough - we dont have to
do it for every adjustment step.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:16 +01:00
Ingo Molnar
2b9d1496e7 time: ntp: make 64-bit constants more robust
Impact: cleanup, no functionality changed

 - make PPM_SCALE an explicit s64 constant, to
   remove (s64) casts from usage sites.

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2536	    114	    136	   2786	    ae2	ntp.o.before
   2536	    114	    136	   2786	    ae2	ntp.o.after

md5:
   40a7728d1188aa18e83e21a81fa7b150  ntp.o.before.asm
   40a7728d1188aa18e83e21a81fa7b150  ntp.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:15 +01:00
Ingo Molnar
e96291653b time: ntp: refactor do_adjtimex() some more
Impact: cleanup, no functionality changed

Further simplify do_adjtimex():

 - introduce the ntp_start_leap_timer() helper function
 - eliminate the goto adj_done complication

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:15 +01:00
Ingo Molnar
80f2257116 time: ntp: refactor do_adjtimex()
Impact: cleanup, no functionality changed

do_adjtimex() is currently a monster function with a maze of
branches. Refactor the txc->modes setting aspects of it into
two new helper functions:

	process_adj_status()
	process_adjtimex_modes()

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2512	    114	    136	   2762	    aca	ntp.o.before
   2512	    114	    136	   2762	    aca	ntp.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:14 +01:00
Ingo Molnar
10dd31a7a1 time: ntp: fix bug in ntp_update_offset() & do_adjtimex()
Impact: change (fix) the way the NTP PLL seconds offset is initialized/tracked

Fix a bug and do a micro-optimization:

When PLL is enabled we do not reset time_reftime. If the PLL
was off for a long time (for example after bootup), this is
arguably the wrong thing to do.

We already had a hack for the common boot-time case in
ntp_update_offset(), in form of:

	if (unlikely(time_status & STA_FREQHOLD || time_reftime == 0))
 		secs = 0;

But the update delta should be reset later on too - not just when
the PLL is enabled for the first time after bootup.

So do it on !STA_PLL -> STA_PLL transitions.

This changes behavior, as previously if ntpd was disabled for
a long time and we restarted it, we'd run from that last update,
with a very large delta.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:13 +01:00
Ingo Molnar
c7986acba2 time: ntp: micro-optimize ntp_update_offset()
Impact: cleanup, no functionality changed

The time_reftime update in ntp_update_offset() to xtime.tv_sec
is a convoluted way of saying that we want to freeze the frequency
and want the 'secs' delta to be 0. Also make this branch unlikely.

This shaves off 8 bytes from the code size:

   text	   data	    bss	    dec	    hex	filename
   2504	    114	    136	   2754	    ac2	ntp.o.before
   2496	    114	    136	   2746	    aba	ntp.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:12 +01:00
Ingo Molnar
478b7aab16 time: ntp: simplify ntp_update_offset_fll()
Impact: cleanup, no functionality changed

Change ntp_update_offset_fll() to delta logic instead of
absolute value logic. This eliminates 'freq_adj' from the
function.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:12 +01:00
Ingo Molnar
f939890b66 time: ntp: refactor and clean up ntp_update_offset()
Impact: cleanup, no functionality changed

- introduce the ntp_update_offset_fll() helper
- clean up the flow and variable naming

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2504	    114	    136	   2754	    ac2	ntp.o.before
   2504	    114	    136	   2754	    ac2	ntp.o.after

md5:
   01f7b8e1a5472a3056f9e4ae84d46315  ntp.o.before.asm
   01f7b8e1a5472a3056f9e4ae84d46315  ntp.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:11 +01:00
Ingo Molnar
bc26c31d44 time: ntp: refactor up ntp_update_frequency()
Impact: cleanup, no functionality changed

Change ntp_update_frequency() from a hard to follow code
flow that uses global variables as temporaries, to a clean
input+output flow.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:10 +01:00
Ingo Molnar
9ce616aaef time: ntp: clean up ntp_update_frequency()
Impact: cleanup, no functionality changed

Prepare a refactoring of ntp_update_frequency().

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2504	    114	    136	   2754	    ac2	ntp.o.before
   2504	    114	    136	   2754	    ac2	ntp.o.after

md5:
   41f3009debc9b397d7394dd77d912f0a  ntp.o.before.asm
   41f3009debc9b397d7394dd77d912f0a  ntp.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:09 +01:00
Ingo Molnar
bbd1267690 time: ntp: simplify the MAX_TICKADJ_SCALED definition
Impact: cleanup, no functionality changed

There's an ugly u64 typecase in the MAX_TICKADJ_SCALED definition,
this can be eliminated by making the MAX_TICKADJ constant's type
64-bit (signed).

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2504	    114	    136	   2754	    ac2	ntp.o.before
   2504	    114	    136	   2754	    ac2	ntp.o.after

md5:
   41f3009debc9b397d7394dd77d912f0a  ntp.o.before.asm
   41f3009debc9b397d7394dd77d912f0a  ntp.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:08 +01:00
Ingo Molnar
3c972c2444 time: ntp: simplify the second_overflow() code flow
Impact: cleanup, no functionality changed

Instead of a hierarchy of conditions, transform them to clean
gradual conditions and return's.

This makes the flow easier to read and makes the purpose of
the function easier to understand.

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2552	    170	    168	   2890	    b4a	ntp.o.before
   2552	    170	    168	   2890	    b4a	ntp.o.after

md5:
   eae1275df0b7d6290c13f6f6f8f05c8c  ntp.o.before.asm
   eae1275df0b7d6290c13f6f6f8f05c8c  ntp.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:07 +01:00