__scm_destroy() walks the list of file descriptors in the scm_fp_list
pointed to by the scm_cookie argument.
Those, in turn, can close sockets and invoke __scm_destroy() again.
There is nothing which limits how deeply this can occur.
The idea for how to fix this is from Linus. Basically, we do all of
the fput()s at the top level by collecting all of the scm_fp_list
objects hit by an fput(). Inside of the initial __scm_destroy() we
keep running the list until it is empty.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes a 2.6.27 regression which was introduced in commit a02908f1.
We weren't passing the chunk parameter down to the two subections,
ext4_indirect_trans_blocks() and ext4_ext_index_trans_blocks(), with
the result that massively overestimate the amount of credits needed by
ext4_da_writepages, especially in the non-extents case. This causes
failures especially on /boot partitions, which tend to be small and
non-extent using since GRUB doesn't handle extents.
This patch fixes the bug reported by Joseph Fannin at:
http://bugzilla.kernel.org/show_bug.cgi?id=11964
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch fixes iwl3945 deadlock during suspend by moving notify_mac out
of iwl3945 mutex. This is a portion of the same fix for iwlwifi by Tomas.
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This patch ensures we clear any scan status bit when
an error occurs while sending the scan command. It is
the implementation of patch:
"iwlwifi: clear scanning bits upon failure"
for iwl3945.
Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
ath5k_rx_status fields rs_antenna and rs_more are u8s, but we
were setting them with bitwise ANDs of 32-bit values.
As a consequence, jumbo frames would not be discarded as intended.
Then, because the hw rate value of such frames is zero, and, since
"ath5k: rates cleanup", we do not fall back to the basic rate, such
packets would trigger the following WARN_ON:
------------[ cut here ]------------
WARNING: at net/mac80211/rx.c:2192 __ieee80211_rx+0x4d/0x57e [mac80211]()
Modules linked in: ath5k af_packet sha256_generic aes_i586 aes_generic cbc loop i915 drm binfmt_misc acpi_cpufreq fan container nls_utf8 hfsplus dm_crypt dm_mod kvm_intel kvm fuse sbp2 snd_hda_intel snd_pcm_oss snd_pcm snd_mixer_oss snd_seq_dummy snd_seq_oss arc4 joydev hid_apple ecb snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device usbhid appletouch mac80211 sky2 snd ehci_hcd ohci1394 bitrev crc32 sr_mod cdrom rtc sg uhci_hcd snd_page_alloc cfg80211 ieee1394 thermal ac battery processor button evdev unix [last unloaded: ath5k]
Pid: 0, comm: swapper Tainted: G W 2.6.28-rc2-wl #14
Call Trace:
[<c0123d1e>] warn_on_slowpath+0x41/0x5b
[<c012005d>] ? sched_debug_show+0x31e/0x9c6
[<c012489f>] ? vprintk+0x369/0x389
[<c0309539>] ? _spin_unlock_irqrestore+0x54/0x58
[<c011cd8f>] ? try_to_wake_up+0x14f/0x15a
[<f81918cb>] __ieee80211_rx+0x4d/0x57e [mac80211]
[<f828872a>] ath5k_tasklet_rx+0x5a1/0x5e4 [ath5k]
[<c013b9cd>] ? clockevents_program_event+0xd4/0xe3
[<c01283a9>] tasklet_action+0x94/0xfd
[<c0127d19>] __do_softirq+0x8c/0x13e
[<c0127e04>] do_softirq+0x39/0x55
[<c0128082>] irq_exit+0x46/0x85
[<c010576c>] do_IRQ+0x9a/0xb2
[<c010461c>] common_interrupt+0x28/0x30
[<f80e934a>] ? acpi_idle_enter_bm+0x2ad/0x31b [processor]
[<c02976bf>] cpuidle_idle_call+0x65/0x9a
[<c010262c>] cpu_idle+0x76/0xa6
[<c02fb402>] rest_init+0x62/0x64
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
07fa/1196
Bewan BWIFI-USB54AR: Tested by night1308, this device is a ZD1211B with
an AL2230S radio.
0ace/b215
HP 802.11abg: Tested by Robert Philippe
Signed-off-by: John W. Linville <linville@tuxdriver.com>
> I'll have a prod at why the [hso] rfkill stuff isn't working next
Ok, I believe this is due to the addition of rfkill_check_duplicity in
rfkill and the fact that test_bit actually returns a negative value
rather than the postive one expected (which is of course equally true).
So when the second WLAN device (the hso device, with the EEE PC WLAN
being the first) comes along rfkill_check_duplicity returns a negative
value and so rfkill_register returns an error. Patch below fixes this
for me.
Signed-Off-By: Jonathan McDowell <noodles@earth.li>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
__ieee80211_tasklet_handler -> __ieee80211_rx ->
__ieee80211_rx_handle_packet -> ieee80211_invoke_rx_handlers ->
ieee80211_rx_h_decrypt -> ieee80211_crypto_tkip_decrypt ->
ieee80211_tkip_decrypt_data -> iwl4965_mac_update_tkip_key ->
iwl_scan_cancel_timeout -> msleep
Ooops!
Avoid the sleep by changing iwl_scan_cancel_timeout with
iwl_scan_cancel and simply returning on failure if the scan persists.
This will cause hardware decryption to fail and we'll handle a few more
frames with software decryption.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
In iwl_bg_request_scan function, if we could not send a
scan command it will go to done.
In done it does the right thing to call mac80211 with
scan complete, but the problem is STATUS_SCAN_HW is still
set causing any future scan to fail. Fix by clearing the scanning status
bits if scan fails.
Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Unfortunately, the result was that mac80211 didn't see all the beacons
it actually wanted to see. This caused lost associations.
Hopefully we can revisit this when mac80211 is less greedy about seeing
beacons directly...
This reverts commit 063279062a.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Enable the wchan config menu item for now on x86-64 arch? This will
at least allow people to enable/disable frame pointers on scheduler
functions.
Signed-off-by: Ken Chen <kenchen@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: moving of function prototypes into own header file
ftrace.h is too big of a file for hardirq.h, and some archs will fail
to build because of the include dependencies not being met.
This patch pulls out the required prototypes for hardirq.h into a smaller
and safer ftrace_irq.h file.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We have a test case which measures the variation in the amount of time
needed to perform a fixed amount of work on the preempt_rt kernel. We
started seeing deterioration in it's performance recently. The test
should never take more than 10 microseconds, but we started 5-10%
failure rate.
Using elimination method, we traced the problem to commit
1b12bbc747 (lockdep: re-annotate
scheduler runqueues).
When LOCKDEP is disabled, this patch only adds an additional function
call to double_unlock_balance(). Hence I inlined double_unlock_balance()
and the problem went away. Here is a patch to make this change.
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove CONFIG_ACPI_EC. It was always set the same as CONFIG_ACPI,
and it had no menu label, so there was no way to set it to anything
other than "y".
Per section 6.5.4 of the ACPI 3.0b specification,
OSPM must make Embedded Controller operation regions, accessed
via the Embedded Controllers described in ECDT, available before
executing any control method.
The ECDT table is optional, but if it is present, the above text
means that the EC it describes is a required part of the ACPI
subsystem, so CONFIG_ACPI_EC=n wouldn't make sense.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Remove CONFIG_ACPI_POWER. It was always set the same as CONFIG_ACPI,
and it had no menu label, so there was no way to set it to anything
other than "y".
The interfaces under CONFIG_ACPI_POWER (acpi_device_sleep_wake(),
acpi_power_transition(), etc) are called unconditionally from the
ACPI core, so we already depend on it always being present.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
acpi_cm_sbs_init() doesn't do anything, so we can just remove it.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
I don't think there's any point in cluttering the code with these.
Better to improve the documentation so *anybody* can figure out
what layer & level to use.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Move all header files for xtensa to arch/xtensa/include and platform and
variant header files to the appropriate arch/xtensa/platforms/ and
arch/xtensa/variants/ directories.
Moving the files gets also rid of all uses of symlinks in the Makefile.
This has been completed already for the majority of the architectures
and xtensa is one out of six missing.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Chris Zankel <chris@zankel.net>
When 'start' and 'end' are less than a cacheline apart and 'start' is
unaligned we are done after cleaning and invalidating the first
cacheline. So check for (start < end) which will not walk off into
invalid address ranges when (start > end).
This issue was caught by drivers/dma/dmatest.
2.6.27 is susceptible.
Cc: <stable@kernel.org>
Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Lothar WaÃ<9f>mann <LW@KARO-electronics.de>
Cc: Lennert Buytenhek <buytenh@marvell.com>
Cc: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
As a result of the ptebits changes, we ended up marking device mappings
as normal memory on ARMv7 CPUs, resulting in undesirable behaviour with
serial ports and the like. While reviewing the section mapping table
entries, other errors in the memory type settings for devices were
detected and confirmed to prevent Xscale3 platforms booting.
Tested on:
OMAP34xx (ARMv7),
OMAP24xx (ARMv6),
OMAP16xx (ARM926T, ARMv5),
PXA311 (Xscale3),
PXA272 (Xscale),
PXA255 (Xscale),
IXP42x (Xscale),
S3C2410 (ARM920T, ARMv4T),
ARM720T (ARMv4T)
StrongARM-110 (ARMv4)
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Mike Rapoport <mike@compulab.co.il>
Tested-by: Ben Dooks <ben-linux@fluff.org>
Tested-by: Anders Grafström <grfstrm@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This fixes a regression introduced by 2c6e6db41f
"Minimize per_cpu reservations." That patch incorrectly used information about
what CPUs are possible that was not yet initialized by ACPI. The end result
was that per_cpu structures for offline CPUs were not initialized causing a
NULL pointer reference.
Since we cannot do the full acpi_boot_init() call any earlier, the simplest
fix is to just parse the MADT for SAPIC entries early to find the CPU
info. This should also allow for some cleanup of the code added by the
"Minimize per_cpu reservations". This patch just fixes the regressions, the
cleanup will come in a later patch.
Signed-off-by: Doug Chapman <doug.chapman@hp.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
CC: Robin Holt <holt@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
No functional change, just reorder some config options and update
the "Power management and ACPI" label to match the defacto x86
standard.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
As of 73bdf0a60e, the kernel needs
to know where modules are located in the virtual address space.
On ARM, we located this region between MODULE_START and MODULE_END.
Unfortunately, everyone else calls it MODULES_VADDR and MODULES_END.
Update ARM to use the same naming, so is_vmalloc_or_module_addr()
can work properly. Also update the comment on mm/vmalloc.c to
reflect that ARM also places modules in a separate region from the
vmalloc space.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The widget layout of the Fujitsu Lifebook S6420 (which is ICH9M-based
and uses an ALC269) is similar but not identical to the Lifebook
S6410/E8410 (which are ICH8M-based and use an ALC262).
It is named lifebook as fujitsu is in use for Amilo machines. This builds
on the Quanta FL1 work and supports all analog inputs & outputs that I am
aware of. Microphone autoswitch is implemented. The laptop mic port takes
precedence over the dock mic port if both happen to have a jack plugged in.
This made sense to me as a design decision (imagine a presentation
environment with the dock fully wired in and the presenter quickly wanting
to override the mic with a headset).
There is mention of a digital audio path on the codec graph, so perhaps
the headphone socket is dual-function analog/digital. I will follow up
with another patch if I can acquire equipment to test this.
Signed-off-by: Tony Vroon <tony@linx.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When an error occurs during the codec probing, typically accessing to an
non-existing codec slot, the controller chip gets often screwed up and
can no longer communicate with the codecs.
This patch adds a preparation phase just to probe codec addresses before
actually creating codec instances. If any error occurs during this
probing phase, the driver resets the controller to recover.
This will (hopefully) fix the famous "single_cmd" errors.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The hda_bus ops callback take struct hda_bus pointer.
Also, the command callback takes the composed command word, instead of
each small bits in arguments.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit c7ffa6c262.
the assumptio of this change was that this would not break
any existing machine. Andrey Borzenkov reported troubles with
the ACPI reboot method: the system would hang on reboot, necessiating
a power cycle. Probably more systems are affected as well.
Also, there are patches queued up for v2.6.29 to disable virtualization
on emergency_restart() - which was the original motivation of
this change.
Reported-by: Andrey Borzenkov <arvidjaar@mail.ru>
Bisected-by: Andrey Borzenkov <arvidjaar@mail.ru>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: right-align /proc/meminfo consistent with other fields
When the split-LRU patches added Inactive(anon) and Inactive(file) lines
to /proc/meminfo, all counts were moved two columns rightwards to fit in.
Now move x86's DirectMap lines two columns rightwards to line up.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Lazy flushing needs to take care of the unmap path too which is not yet
implemented and leads to stale IO/TLB entries. This is fixed by this
patch.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch adds the SMP/nAMP mode setting to __v7_setup and also sets
TTBR to shared page table walks if SMP is enabled. The PTWs are also
marked inner cacheable for both SMP and UP modes (setting this is fine
even if the CPU doesn't support the feature).
Signed-off-by: Jon Callan <Jon.Callan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In case of non-aliasing VIPT caches, there is no need to flush the whole
cache when new mapping is created. The patch introduces this condition
check. In the non-aliasing VIPT case flush_cache_vmap() needs a DSB
since the set_pte_at() function called from vmap_pte_range() does not
have such barrier (done usually via TLB flushing functions).
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
On ARMv7, conditional undefined instructions may generate exceptions
even if the condition is not met. The vfphw.S contains the FPINST and
FPINST2 access instructions which may not be present on processors with
synchronous VFP exceptions.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The flush_cache_all function on ARMv7 is implemented as a series of
cache operations by set/way. These are not guaranteed to be ordered with
previous memory accesses, requiring a DMB. This patch also adds barriers
for the TLB operations in compressed/head.S
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
According to TRM, 256*Fs clock output should be enabled
when TWL4030 is in slave mode, not master.
This allows sound to work on OMAP3 Pandora, which uses
256*Fs clock.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
If ubi_thread() exits but kthread_should_stop() is not true
then kthread_stop() will never return and cleanup thread
will forever stay in "D" state.
Signed-off-by: Vitaliy Gusev <vgusev@openvz.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
'ubi_io_read_data()' may return EBADMSG in case of an ECC error,
and we should not panic because of this. We have CRC32 checksum
and may check the data. So just ignore the EBADMSG error.
This patch also fixes a minor spelling error at the same time.
Signed-off-by: Zoltan Sogor <weth@inf.u-szeged.hu>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
We print 'ino_t' type using '%lu' printk() placeholder, but this
results in many warnings when compiling for Alpha platform. Fix
this by adding (unsingned long) casts.
Fixes these warnings:
fs/ubifs/journal.c:693: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/journal.c:1131: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/dir.c:163: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/tnc.c:2680: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/tnc.c:2700: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t'
fs/ubifs/replay.c:1066: warning: format '%lu' expects type 'long unsigned int', but argument 7 has type 'ino_t'
fs/ubifs/orphan.c:108: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/orphan.c:135: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/orphan.c:142: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/orphan.c:154: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/orphan.c:159: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/orphan.c:451: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/orphan.c:539: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/orphan.c:612: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/orphan.c:843: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/orphan.c:856: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/recovery.c:1438: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/recovery.c:1443: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/recovery.c:1475: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/recovery.c:1495: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:105: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t'
fs/ubifs/debug.c:105: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t'
fs/ubifs/debug.c:110: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t'
fs/ubifs/debug.c:110: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t'
fs/ubifs/debug.c:114: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t'
fs/ubifs/debug.c:114: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t'
fs/ubifs/debug.c:118: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t'
fs/ubifs/debug.c:118: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t'
fs/ubifs/debug.c:1591: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1671: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1674: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t'
fs/ubifs/debug.c:1680: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1699: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t'
fs/ubifs/debug.c:1788: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t'
fs/ubifs/debug.c:1821: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t'
fs/ubifs/debug.c:1833: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t'
fs/ubifs/debug.c:1924: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1932: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1938: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1945: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1953: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1960: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1967: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1973: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1988: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1991: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t'
fs/ubifs/debug.c:2009: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'ino_t'
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Noticed by sparse:
fs/ubifs/file.c:75:2: warning: restricted __le64 degrades to integer
fs/ubifs/file.c:629:4: warning: restricted __le64 degrades to integer
fs/ubifs/dir.c:431:3: warning: restricted __le64 degrades to integer
This should be checked to ensure the ubifs_assert is working as
intended, I've done the suggested annotation in this patch.
fs/ubifs/sb.c:298:6: warning: incorrect type in assignment (different base types)
fs/ubifs/sb.c:298:6: expected int [signed] [assigned] tmp
fs/ubifs/sb.c:298:6: got restricted __le64 [usertype] <noident>
fs/ubifs/sb.c:299:19: warning: incorrect type in assignment (different base types)
fs/ubifs/sb.c:299:19: expected restricted __le64 [usertype] atime_sec
fs/ubifs/sb.c:299:19: got int [signed] [assigned] tmp
fs/ubifs/sb.c:300:19: warning: incorrect type in assignment (different base types)
fs/ubifs/sb.c:300:19: expected restricted __le64 [usertype] ctime_sec
fs/ubifs/sb.c:300:19: got int [signed] [assigned] tmp
fs/ubifs/sb.c:301:19: warning: incorrect type in assignment (different base types)
fs/ubifs/sb.c:301:19: expected restricted __le64 [usertype] mtime_sec
fs/ubifs/sb.c:301:19: got int [signed] [assigned] tmp
This looks like a bugfix as your tmp was a u32 so there was truncation in
the atime, mtime, ctime value, probably not intentional, add a tmp_le64
and use it here.
fs/ubifs/key.h:348:9: warning: cast to restricted __le32
fs/ubifs/key.h:348:9: warning: cast to restricted __le32
fs/ubifs/key.h:419:9: warning: cast to restricted __le32
Read from the annotated union member instead.
fs/ubifs/recovery.c:175:13: warning: incorrect type in assignment (different base types)
fs/ubifs/recovery.c:175:13: expected unsigned int [unsigned] [usertype] save_flags
fs/ubifs/recovery.c:175:13: got restricted __le32 [usertype] flags
fs/ubifs/recovery.c:186:13: warning: incorrect type in assignment (different base types)
fs/ubifs/recovery.c:186:13: expected restricted __le32 [usertype] flags
fs/ubifs/recovery.c:186:13: got unsigned int [unsigned] [usertype] save_flags
Do byteshifting at compile time of the flag value. Annotate the saved_flags
as le32.
fs/ubifs/debug.c:368:10: warning: cast to restricted __le32
fs/ubifs/debug.c:368:10: warning: cast from restricted __le64
Should be checked if the truncation was intentional, I've changed the
printk to print the full width.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Remove the "UBIFS background thread ubifs_bgd0_0 started" message.
We kill the background thread when we switch to R/O mode, and
start it again whan we switch to R/W mode. OLPC is doing this
many times during boot, and we see this message many times as
well, which is irritating. So just kill the message.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The SAM9 watchdog driver is usable on the whole family of AT91SAM9 and
CAP9 processors.
Update the configuration to indicate this and allow the driver to be selected.
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
