As the fence registers only apply to regions inside the GGTT is makes
more sense that we track these as part of the i915_ggtt and not the
general mm. In the next patch, we will then pull the register locking
underneath the i915_ggtt.mutex.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073254.24048-1-chris@chris-wilson.co.uk
There is a race between the binder driver cleaning
up a completed transaction via binder_free_transaction()
and a user calling binder_ioctl(BC_FREE_BUFFER) to
release a buffer. It doesn't matter which is first but
they need to be protected against running concurrently
which can result in a UAF.
Signed-off-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ast doesn't implement the mode_set_base_atomic hook this would need,
so this is dead code.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sam Bobroff <sbobroff@linux.ibm.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: YueHaibing <yuehaibing@huawei.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612091253.26413-2-daniel.vetter@ffwll.ch
With all the work I've done on replacing fb notifier calls with direct
calls into fbcon the backlight/lcd notifier is the only user left.
It will only receive events now that it cares about, hence we can
remove this check.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-34-daniel.vetter@ffwll.ch
this driver is pretty horrible from a design pov, and needs a complete
overhaul. Concrete thing that annoys me is that it looks at
registered_fb, which is an internal thing to fbmem.c and fbcon.c. And
ofc it gets the lifetime rules all wrong (it should at least use
get/put_fb_info).
Looking at the history, there's been an attempt at dropping this from
staging in 2016, but that had to be reverted. Since then not real
effort except the usual stream of trivial patches, and fbdev has been
formally closed for any new hw support. Time to try again and drop
this?
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jens Frederich <jfrederich@gmail.com>
Cc: Daniel Drake <dsd@laptop.org>
Cc: Jon Nettleton <jon.nettleton@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-33-daniel.vetter@ffwll.ch
Use devm_platform_ioremap_resource() to simplify the code a bit.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use devm_platform_ioremap_resource() to simplify the code a bit.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch corrects the SPDX License Identifier style
in header file related to Crypto Drivers for Hisilicon
SEC Engine in Hip06 and Hip07.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct qat_alg_buf_list {
...
struct qat_alg_buf bufers[];
} __packed __aligned(64);
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
So, replace the following form:
sizeof(struct qat_alg_buf_list) + ((1 + n) * sizeof(struct qat_alg_buf))
with:
struct_size(bufl, bufers, n + 1)
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add crypto node in device tree for CAAM support.
Noteworthy is that on 7ulp the interrupt line is shared
between the two job rings.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch corrects the SPDX License Identifier style
in header files related to Crypto Drivers for Cavium Nitrox
family CNN55XX devices.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix sparse warnings:
drivers/crypto/bcm/cipher.c:99:6: warning: symbol 'BCMHEADER' was not declared. Should it be static?
drivers/crypto/bcm/cipher.c:2096:6: warning: symbol 'spu_no_incr_hash' was not declared. Should it be static?
drivers/crypto/bcm/cipher.c:4823:5: warning: symbol 'bcm_spu_probe' was not declared. Should it be static?
drivers/crypto/bcm/cipher.c:4867:5: warning: symbol 'bcm_spu_remove' was not declared. Should it be static?
drivers/crypto/bcm/spu2.c:52:6: warning: symbol 'spu2_cipher_type_names' was not declared. Should it be static?
drivers/crypto/bcm/spu2.c:56:6: warning: symbol 'spu2_cipher_mode_names' was not declared. Should it be static?
drivers/crypto/bcm/spu2.c:60:6: warning: symbol 'spu2_hash_type_names' was not declared. Should it be static?
drivers/crypto/bcm/spu2.c:66:6: warning: symbol 'spu2_hash_mode_names' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Constify the ctx and iv arguments to crypto_chacha_init() and the
various chacha*_stream_xor() functions. This makes it clear that they
are not modified.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- Use sg_init_one() instead of sg_init_table() then sg_set_buf().
- Remove unneeded calls to sg_init_table() prior to scatterwalk_ffwd().
- Simplify initializing the poly tail block.
- Simplify computing padlen.
This doesn't change any actual behavior.
Cc: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 'chunksize' and 'walksize' properties of skcipher algorithms are
implementation details that users of the skcipher API should not be
looking at. So move their accessor functions from <crypto/skcipher.h>
to <crypto/internal/skcipher.h>.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto_skcipher_encrypt() and crypto_skcipher_decrypt() have grown to be
more than a single indirect function call. They now also check whether
a key has been set, and with CONFIG_CRYPTO_STATS=y they also update the
crypto statistics. That can add up to a lot of bloat at every call
site. Moreover, these always involve a function call anyway, which
greatly limits the benefits of inlining.
So change them to be non-inline.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto_aead_encrypt() and crypto_aead_decrypt() have grown to be more
than a single indirect function call. They now also check whether a key
has been set, the decryption side checks whether the input is at least
as long as the authentication tag length, and with CONFIG_CRYPTO_STATS=y
they also update the crypto statistics. That can add up to a lot of
bloat at every call site. Moreover, these always involve a function
call anyway, which greatly limits the benefits of inlining.
So change them to be non-inline.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit 944585a64f ("crypto: x86/aes-ni - remove special handling
of AES in PCBC mode"), the "__aes-aesni" internal cipher algorithm is no
longer used. So remove it too.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rewrite the skcipher API example, changing it to encrypt a buffer with
AES-256-XTS. This addresses various problems with the previous example:
- It requests a specific driver "cbc-aes-aesni", which is unusual.
Normally users ask for "cbc(aes)", not a specific driver.
- It encrypts only a single AES block. For the reader, that doesn't
clearly distinguish the "skcipher" API from the "cipher" API.
- Showing how to encrypt something with bare CBC is arguably a poor
choice of example, as it doesn't follow modern crypto trends. Now,
usually authenticated encryption is recommended, in which case the
user would use the AEAD API, not skcipher. Disk encryption is still a
legitimate use for skcipher, but for that usually XTS is recommended.
- Many other bugs and poor coding practices, such as not setting
CRYPTO_TFM_REQ_MAY_SLEEP, unnecessarily allocating a heap buffer for
the IV, unnecessary NULL checks, using a pointless wrapper struct, and
forgetting to set an error code in one case.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Call cond_resched() after each fuzz test iteration. This avoids stall
warnings if fuzz_iterations is set very high for testing purposes.
While we're at it, also call cond_resched() after finishing testing each
test vector.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that all algorithms explicitly set cra_driver_name, make it required
for algorithm registration and remove the code that generated a default
cra_driver_name.
Also add an explicit check that cra_name is set too, since that's
obviously required too, yet it didn't seem to be checked anywhere.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Most generic crypto algorithms declare a driver name ending in
"-generic". The rest don't declare a driver name and instead rely on
the crypto API automagically appending "-generic" upon registration.
Having multiple conventions is unnecessarily confusing and makes it
harder to grep for all generic algorithms in the kernel source tree.
But also, allowing NULL driver names is problematic because sometimes
people fail to set it, e.g. the case fixed by commit 4179803643
("crypto: cavium/zip - fix collision with generic cra_driver_name").
Of course, people can also incorrectly name their drivers "-generic".
But that's much easier to notice / grep for.
Therefore, let's make cra_driver_name mandatory. In preparation for
this, this patch makes all generic algorithms set cra_driver_name.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This reverts commit c70669ecef as it
breaks the build.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Bich Hemon <bich.hemon@st.com>
Cc: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This merges a fix for a bug in our context id handling on 64-bit hash
CPUs.
The fix was written against v5.1 to ease backporting to stable
releases. Here we are merging it up to a v5.2-rc2 base, which involves
a bit of manual resolution.
It also adds a test case for the bug.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This commit fixes the warning due to returning uninitialized value
from start_streams() helper function.
sound/firewire/dice/dice-stream.c: In function 'start_streams.isra.0':
>> sound/firewire/dice/dice-stream.c:350:6: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized]
int err;
^~~
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 3cd2c2d780 ("ALSA: dice: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Raspberry Pi's firmware offers and interface though which update it's
performance requirements. It allows us to request for specific runtime
frequencies, which the firmware might or might not respect, depending on
the firmware configuration and thermals.
As the maximum and minimum frequencies are configurable in the firmware
there is no way to know in advance their values. So the Raspberry Pi
cpufreq driver queries them, builds an opp frequency table to then
launch cpufreq-dt.
Also, as the firmware interface might be configured as a module, making
the cpu clock unavailable during init, this implements a full fledged
driver, as opposed to most drivers registering cpufreq-dt, which only
make use of an init routine.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Do not fail if any of the requested subtypes are not availabe, but set the
number of resources to 0 and continue parsing the resource ranges.
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Texas Instrument's System Control Interface (TI-SCI) Message Protocol
is used in Texas Instrument's System on Chip (SoC) such as those
in K3 family AM654 SoC to communicate between various compute
processors with a central system controller entity.
The system controller provides various services including the control
of other compute processors within the SoC. Extend the TI-SCI protocol
support to add various TI-SCI commands to invoke services associated
with power and reset control, and boot vector management of the
various compute processors from the Linux kernel.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Configuration of NAVSS resource, like rings, UDMAP channels, flows
and PSI-L thread management need to be done via TISCI.
Add the needed structures and functions for NAVSS resource configuration of
the following:
Rings from Ring Accelerator
PSI-L thread management
UDMAP tchan, rchan and rflow configuration.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
TI-SCI firmware will only respond to messages when the
TI_SCI_FLAG_REQ_ACK_ON_PROCESSED flag is set. Most messages already do
this, set this for the ones that do not.
This will be enforced in future firmware that better match the TI-SCI
specifications, this patch will not break users of existing firmware.
Fixes: aa276781a6 ("firmware: Add basic support for TI System Control Interface (TI-SCI) protocol")
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Tested-by: Alejandro Hernandez <ajhernandez@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Enable ECSPI2 and bind CPLD to both chip selects.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The LS1021A-TSN is a development board built by VVDN/Argonboards in
partnership with NXP.
It features the LS1021A SoC and the first-generation SJA1105T Ethernet
switch for prototyping implementations of a subset of IEEE 802.1 TSN
standards.
It has two regular Ethernet ports and four switched, TSN-capable ports.
It also features:
- One Arduino header
- One expansion header
- Two USB 3.0 ports
- One mini PCIe slot
- One SATA interface
- Accelerometer, gyroscope, temperature sensors
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ttSQ
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20190612' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fixes from Paul Moore:
"Three patches for v5.2.
One fixes a problem where we weren't correctly logging raw SELinux
labels, the other two fix problems where we weren't properly checking
calls to kmemdup()"
* tag 'selinux-pr-20190612' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix a missing-check bug in selinux_sb_eat_lsm_opts()
selinux: fix a missing-check bug in selinux_add_mnt_opt( )
selinux: log raw contexts as untrusted strings
This tests that when a process with a mapping above 512TB forks we
correctly separate the parent and child address spaces. This exercises
the bug in the context id handling fixed in the previous commit.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Fixes SI cards running on amdgpu.
Fixes: 1929059893 ("drm/amd/amdgpu: add RLC firmware to support raven1 refresh")
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=110883
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The "block" variable can be set by the user through debugfs, so it can
be quite large which leads to shift wrapping here. This means we report
a "block" as supported when it's not, and that leads to array overflows
later on.
This bug is not really a security issue in real life, because debugfs is
generally root only.
Fixes: 36ea1bd2d0 ("drm/amdgpu: add debugfs ctrl node")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes the warnings:
* include/linux/gpio.h:254:11: warning: 'struct pinctrl_dev' declared
inside parameter list will not be visible outside of this definition
or declaration
* include/linux/gpio/driver.h:602:11: warning: 'struct pinctrl_dev'
declared inside parameter list will not be visible outside of this
definition or declaration
Fixes: 78b99577b3 ("pinctrl: remove unused pin_is_valid()")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Enrico Weigelt <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
They are capable of using intertouch and it works well with
psmouse.synaptics_intertouch=1, so add them to the list.
Without it, scrolling and gestures are jumpy, three-finger pinch gesture
doesn't work and three- or four-finger swipes sometimes get stuck.
Signed-off-by: Alexander Mikhaylenko <exalm7659@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Adding delays to TCP flows is crucial for studying behavior
of TCP stacks, including congestion control modules.
Linux offers netem module, but it has unpractical constraints :
- Need root access to change qdisc
- Hard to setup on egress if combined with non trivial qdisc like FQ
- Single delay for all flows.
EDT (Earliest Departure Time) adoption in TCP stack allows us
to enable a per socket delay at a very small cost.
Networking tools can now establish thousands of flows, each of them
with a different delay, simulating real world conditions.
This requires FQ packet scheduler or a EDT-enabled NIC.
This patchs adds TCP_TX_DELAY socket option, to set a delay in
usec units.
unsigned int tx_delay = 10000; /* 10 msec */
setsockopt(fd, SOL_TCP, TCP_TX_DELAY, &tx_delay, sizeof(tx_delay));
Note that FQ packet scheduler limits might need some tweaking :
man tc-fq
PARAMETERS
limit
Hard limit on the real queue size. When this limit is
reached, new packets are dropped. If the value is lowered,
packets are dropped so that the new limit is met. Default
is 10000 packets.
flow_limit
Hard limit on the maximum number of packets queued per
flow. Default value is 100.
Use of TCP_TX_DELAY option will increase number of skbs in FQ qdisc,
so packets would be dropped if any of the previous limit is hit.
Use of a jump label makes this support runtime-free, for hosts
never using the option.
Also note that TSQ (TCP Small Queues) limits are slightly changed
with this patch : we need to account that skbs artificially delayed
wont stop us providind more skbs to feed the pipe (netem uses
skb_orphan_partial() for this purpose, but FQ can not use this trick)
Because of that, using big delays might very well trigger
old bugs in TSO auto defer logic and/or sndbuf limited detection.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When sid == 0 (we are resetting keycreate_sid to the default value), we
should skip the KEY__CREATE check.
Before this patch, doing a zero-sized write to /proc/self/keycreate
would check if the current task can create unlabeled keys (which would
usually fail with -EACCESS and generate an AVC). Now it skips the check
and correctly sets the task's keycreate_sid to 0.
Bug report: https://bugzilla.redhat.com/show_bug.cgi?id=1719067
Tested using the reproducer from the report above.
Fixes: 4eb582cf1f ("[PATCH] keys: add a way to store the appropriate context for newly-created keys")
Reported-by: Kir Kolyshkin <kir@sacred.ru>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
These are actually fbcon ioctls which just happen to be exposed
through /dev/fb*. They completely ignore which fb_info they're called
on, and I think the userspace tool even hardcodes to /dev/fb0.
Hence just forward the entire thing to fbcon.c wholesale.
Note that this patch drops the fb_lock/unlock on the set side. Since
the ioctl can operate on any fb (as passed in through
con2fb.framebuffer) this is bogus. Also note that fbcon.c in general
never calls fb_lock on anything, so this has been badly broken
already.
With this the last user of the fbcon notifier callback is gone, and we
can garbage collect that too.
v2: add missing uaccess.h include (alpha fails to compile otherwise),
reported by kbuild.
v3: Remember to also drop the #defines (Maarten)
v4: Add the static inline to dummy functions.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Yisheng Xie <ysxie@foxmail.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Peter Rosin <peda@axentia.se>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-31-daniel.vetter@ffwll.ch
While at it, clean up the interface a bit and push the console locking
into fbcon.c.
v2: Remove now outdated comment (Lukas).
v3: Forgot to add static inline to the dummy function.
Acked-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Yisheng Xie <ysxie@foxmail.com>
Cc: linux-fbdev@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-30-daniel.vetter@ffwll.ch
Create a new wrapper function for this, feels like there's some
refactoring room here between the two modes.
v2: backlight notifier is also interested in the mode change event,
it calls lcd->set_mode, of which there are 3 implementations. Thanks
to Maarten for spotting this. So we keep that. We can ditch the differentiation
between mode change and all mode changes (because backlight notifier
doesn't care), and we can drop the FBINFO_MISC_USEREVENT stuff too,
because that's just to prevent recursion between fbmem.c and fbcon.c.
While at it flatten the control flow a bit.
v3: Need to add a static inline to the dummy function.
v4: Add missing #include <fbcon.h> to sh_mob (Sam).
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Yisheng Xie <ysxie@foxmail.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Peter Rosin <peda@axentia.se>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: linux-fbdev@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-29-daniel.vetter@ffwll.ch
Instead of wiring almost everything down to the very last line using
goto soup (but not consistently, where would the fun be otherwise)
drop out early when checks fail. This allows us to flatten the huge
indent levels to just 1.
Aside: If a driver doesn't set ->fb_check_var, then FB_ACTIVATE_NOW
does nothing. This bug exists ever since this code was extracted as a
common helper in 2002, hence I decided against fixing it. Everyone
just better have a fb_check_var to make sure things work correctly.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Peter Rosin <peda@axentia.se>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-28-daniel.vetter@ffwll.ch
With the recursion broken in the previous patch we can drop the
FBINFO_MISC_USEREVENT flag around calls to fb_blank - recursion
prevention was it's only job.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Yisheng Xie <ysxie@foxmail.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Peter Rosin <peda@axentia.se>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-27-daniel.vetter@ffwll.ch
There's a callchain of:
fbcon_fb_blanked -> do_(un)blank_screen -> consw->con_blank
-> fbcon_blank -> fb_blank
Things don't go horribly wrong because the BKL console_lock safes the
day, but that's about it. And the seeming recursion is broken in 2
ways:
- Starting from the fbdev ioctl we set FBINFO_MISC_USEREVENT, which
tells the fbcon_blank code to not call fb_blank. This was required
to not deadlock when recursing on the fb_notifier_chain mutex.
- Starting from the con_blank hook we're getting saved by the
console_blanked checks in do_blank/unblank_screen. Or at least
that's my theory.
Anyway, recursion isn't awesome, so let's stop it. Breaking the
recursion avoids the need to be in the FBINFO_MISC_USEREVENT critical
section, so lets move it out of that too.
The astute reader will notice that fb_blank seems to require
lock_fb_info(), which the fbcon code seems to ignore. I have no idea
how to fix that problem, so let's keep ignoring it.
v2: I forgot the sysfs blanking code.
v3: Fix typo in callchain in the commmit message (Sam).
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Peter Rosin <peda@axentia.se>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-26-daniel.vetter@ffwll.ch
