Add pinctrl support for UARTs exposed on the Sophon Edge board.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Add pinctrl support for Bitmain BM1880 SoC. This SoC only supports
pinmuxing and the pinctrl registers are part of the sctrl block.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Add GPIO line names for Sophon Edge board based on BM1880 SoC from
Bitmain. Line names are based on the board schematics as well as the
96Boards Consumer Edition specification v1.0.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Add GPIO support for Bitmain BM1880 SoC based on Designware APB GPIO
controller IP. IP exposes 3 GPIO controllers with a total of 72 pins.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Commit f4fd2ec08f: ("dmaengine: stm32-dma: use platform_get_irq()") used
unsigned variable irq to store the results and check later for negative
errors, so update the code to use signed variable for this
Fixes: f4fd2ec08f ("dmaengine: stm32-dma: use platform_get_irq()")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
file_remove_privs() might be called for non-regular files, e.g.
blkdev inode. There is no reason to do its job on things
like blkdev inodes, pipes, or cdevs. Hence, abort if
file does not refer to a regular inode.
AV: more to the point, for devices there might be any number of
inodes refering to given device. Which one to strip the permissions
from, even if that made any sense in the first place? All of them
will be observed with contents modified, after all.
Found by LockDoc (Alexander Lochmann, Horst Schirmeier and Olaf
Spinczyk)
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Alexander Lochmann <alexander.lochmann@tu-dortmund.de>
Signed-off-by: Horst Schirmeier <horst.schirmeier@tu-dortmund.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It has no business being there, it's checked by relevant ->get_tree()
as it is *and* it returns the wrong error for no reason whatsoever.
Fixes: f3a09c9201 "introduce fs_context methods"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Considering that in polling mode each link drop will be latched,
settings can't have changed if link was up and is up.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn says:
====================
Make DSA tag drivers kernel modules
Historically, DSA tag drivers have been compiled into the kernel as
part of the DSA core. With the growing number of tag drivers, it makes
sense to allow this driver code to be compiled as a module, and loaded
on demand.
v2
--
Move name to end of structure, keeping the hot entries at the beginning.
More tag protocol to end of structure to keep hot members at the beginning.
Fix indent of #endif
Rewrite to move list pointer into a new structure
void functions, since there cannot be errors
Fix fall-through comment
Reorder patch for unused symbols to before tag drivers can be modules
tab/space cleanup
Help text wording
NET_DSA_TAG_BRCM_COMMON and NET_DSA_TAG_KZS_COMMON hidden
v3
--
boilerplate: Move kdoc next to macro
boilerplate: Fix THIS_MODULE indentation
Kconfig: More tabification
Kconfig: Punctuation
v4
--
Cover note {H}istorically
Kconfig: trailer
====================
Tested-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the CONFIG symbols tristate and add help text.
The broadcom and Microchip KSZ tag drivers support two different
tagging protocols in one driver. Add a configuration option for the
drivers, and then options to select the protocol.
Create a submenu for the tagging drivers.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
v2:
tab/space cleanup
Help text wording
NET_DSA_TAG_BRCM_COMMON and NET_DSA_TAG_KZS_COMMON hidden
v3:
More tabification
Punctuation
v4:
trailler->trailer
Signed-off-by: David S. Miller <davem@davemloft.net>
It is possible that the driver is compiled with both
CONFIG_NET_DSA_TAG_BRCM and CONFIG_NET_DSA_TAG_BRCM_PREPEND disabled.
This results in warnings about unused symbols. Add some conditional
compilation to avoid this.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
v2
Reorder patch to before tag drivers can be modules
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that tag drivers dynamically register, we don't need the static
table. Remove it. This also means the tag driver structures can be
made static.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the _get and _put functions to make use of the list of tag
drivers. Also, trigger the loading of the module, based on the alias
information. The _get function takes a reference on the tag driver, so
it cannot be unloaded, and the _put function releases the reference.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
v2:
Make tag_driver_register void
Signed-off-by: David S. Miller <davem@davemloft.net>
When a DSA switch driver is unloaded, the lock on the tag driver
should be released so the module can be unloaded. Add the needed calls,
but leave the actual release code as a stub.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
v2
Signed-off-by: David S. Miller <davem@davemloft.net>
dsa_resolve_tag_protocol() is used to find the tagging driver needed
by a switch driver. When the tagging drivers become modules, it will
be necassary to take a reference on the module to prevent it being
unloaded. So rename this function to _get() to indicate it has some
locking properties.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The none tagger is special in that it does not live in a tag_*.c file,
but is within the core. Register/unregister when DSA is
loaded/unloaded.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Let the tag drivers register themselves with the DSA core, keeping
them in a linked list.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
v2
Signed-off-by: David S. Miller <davem@davemloft.net>
A DSA tag driver module will need to register the tag protocols it
implements with the DSA core. Add macros containing this boiler plate.
The registration/unregistration code is currently just a stub. A Later
patch will add the real implementation.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
v2
Fix indent of #endif
Rewrite to move list pointer into a new structure
v3
Move kdoc next to macro
Fix THIS_MODULE indentation
Signed-off-by: David S. Miller <davem@davemloft.net>
In order that we can match the tagging protocol a switch driver
request to the tagger, we need to know what protocol the tagger
supports. Add this information to the ops structure.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
v2
More tag protocol to end of structure to keep hot members at the beginning.
Signed-off-by: David S. Miller <davem@davemloft.net>
All the tag drivers are some variant of GPL. Add a MODULE_LICENSE()
indicating this, so the drivers can later be compiled as modules.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the tag drivers become modules, we will need to dynamically load
them based on what the switch drivers need. Add aliases to map between
the TAG protocol and the driver.
In order to do this, we need the tag protocol number as something
which the C pre-processor can stringinfy. Only the compiler knows the
value of an enum, CPP cannot use them. So add #defines.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rather than keep a list to map a tagger ops to a name, place the name
into the ops structure. This removes the hard coded list, a step
towards making the taggers more dynamic.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
v2:
Move name to end of structure, keeping the hot entries at the beginning.
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an SPDX header, and remove the license boilerplate text.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
and adding Bartosz as a reviewer.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uh0O
-----END PGP SIGNATURE-----
Merge tag 'davinci-fixes-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
A MAINTAINERS file update removing Kevin as one of DaVinci maintainers
and adding Bartosz as a reviewer.
* tag 'davinci-fixes-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
MAINTAINERS: update arch/arm/mach-davinci
Signed-off-by: Olof Johansson <olof@lixom.net>
- A fix on LS1021A-TWR board that SGMII PCS link remains down for
eTSEC0 upon an ifdown/ifup sequence.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcvTFYAAoJEFBXWFqHsHzOMjUIAI0yp8evhF7SKhz7IESfs4sk
O7ER8WMJb11gWgQICEJCWshBfaj28kRO25INLJgA9Txm19wB7brfKv/wVlYSrQeU
kIhKZHJkp3xVibfopuqWlq3jsZyoMSPzaLKGK8d8i2PE1ug6zDvTQAfebMtjKGxU
kZjj2q3o7Vo81MK5aswy5ohMPyHfMszZbfgLVBbk5dY7X9W6F0abkRxReAjnfDrL
QPMpMLCRHoIymPkTqDmsyQ090ZLZW+3XCL0lvDzfCVvlrvM3FaBb6HclzvZuaeBr
TghmBIlc/as9Kgnh/kygDkDkUwKfE1t2ntaRFdxgqxwOpwtMw3RQ643FFGAAHtU=
=BDC3
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
i.MX fixes for 5.1, round 3:
- A fix on LS1021A-TWR board that SGMII PCS link remains down for
eTSEC0 upon an ifdown/ifup sequence.
* tag 'imx-fixes-5.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect
Signed-off-by: Olof Johansson <olof@lixom.net>
- Pinctrl related fixes for the A33 NAND controller
- Fix the refcounting of DT nodes in our core code
- Fix for a typo'd DT property
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXLmrygAKCRDj7w1vZxhR
xWPzAPsG8IOfePeDDq5QtpXuO/ksMCb1H/+1dsHwe6yW2CFrQwD/W3p/n5i/ervO
tUtfb4a4uz0WthUrApkWlCUS30IGdwU=
=/Hf9
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-5.1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes
Allwinner fixes for 5.1
- Pinctrl related fixes for the A33 NAND controller
- Fix the refcounting of DT nodes in our core code
- Fix for a typo'd DT property
* tag 'sunxi-fixes-for-5.1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: a33: Reintroduce default pinctrl muxing
arm64: dts: allwinner: a64: Rename hpvcc-supply to cpvdd-supply
ARM: sunxi: fix a leaked reference by adding missing of_node_put
ARM: sunxi: fix a leaked reference by adding missing of_node_put
Signed-off-by: Olof Johansson <olof@lixom.net>
- A couple of imx6q-logicpd device tree fixes to reduce inrush current,
so that the board can always work properly.
- Fix buggy device trees that use AR803X to set up phy-mode as
rgmii-id. These device trees are broken since day one, and the bug
gets exposed by the AR803X phy driver changes. i.MX community agreed
to fix those broken device trees rather than supporting messy back
compatibility in driver code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJctEe5AAoJEFBXWFqHsHzOayAH/igeN6Se6+DdOTCHiHHOeew4
udAHDVaNnSNAYIggvn+0T6QfkI21ugaFUWwtVgeINeVsXSKwk3w/AJVl79KFmSy1
Ivewk8KTLKO/Ig24XqMXdX2RnDed+xR8JVyNLUrAfnOYZSdZ10VWnovkSMCZcHwM
h6reHoCrf/+Teh3xRaEr/xgzrzK5mIFhEgu5iaeGdcQhtqaBYuXSb/KGEDbAkpaP
X8rnetZvUH2Z/og5i4c/0cP8rh1KDZ+c6+9cbDfhWCGf61tadZPGxBMUfMtQEPio
HV0Kxd7+j+lTtG6OjpbTAzLXJ25H3hbleEyflZQpAmUEkb+KIYwkAcpbcLqk2EY=
=q05H
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
i.MX fixes for 5.1, round 2:
- A couple of imx6q-logicpd device tree fixes to reduce inrush current,
so that the board can always work properly.
- Fix buggy device trees that use AR803X to set up phy-mode as
rgmii-id. These device trees are broken since day one, and the bug
gets exposed by the AR803X phy driver changes. i.MX community agreed
to fix those broken device trees rather than supporting messy back
compatibility in driver code.
* tag 'imx-fixes-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6q-logicpd: Reduce inrush current on USBH1
ARM: dts: imx6q-logicpd: Reduce inrush current on start
ARM: dts: imx: Fix the AR803X phy-mode
Signed-off-by: Olof Johansson <olof@lixom.net>
fanotify_get_fsid() is reading mark->connector->fsid under srcu. It can
happen that it sees mark not fully initialized or mark that is already
detached from the object list. In these cases mark->connector
can be NULL leading to NULL ptr dereference. Fix the problem by
being careful when reading mark->connector and check it for being NULL.
Also use WRITE_ONCE when writing the mark just to prevent compiler from
doing something stupid.
Reported-by: syzbot+15927486a4f1bfcbaf91@syzkaller.appspotmail.com
Fixes: 77115225ac ("fanotify: cache fsid in fsnotify_mark_connector")
Signed-off-by: Jan Kara <jack@suse.cz>
1. DTC warning fixes: move timer and pmu nodes outside of soc node,
2. Properly override MDMA0 on Universal C210,
3. Fix camera clock provider (to match bindings and driver) on Goni.
-----BEGIN PGP SIGNATURE-----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=5OFy
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.2, second round
1. DTC warning fixes: move timer and pmu nodes outside of soc node,
2. Properly override MDMA0 on Universal C210,
3. Fix camera clock provider (to match bindings and driver) on Goni.
* tag 'samsung-dt-5.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: s5pv210: Fix camera clock provider on Goni board
ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210
ARM: dts: exynos: Move fixed-clocks out of soc on Exynos3250
ARM: dts: exynos: Remove unneeded address/size cells from fixed-clock on Exynos3250
ARM: dts: exynos: Move pmu and timer nodes out of soc
Signed-off-by: Olof Johansson <olof@lixom.net>
It is discouraged to have OF partitions as subnodes directly
under the device, create a "partitions" subnode and put the
partitions inside it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add ADC temp for temp alarm node on PM8998
* Add ref clks for DSI PHYs on SDM845 and MSM8916
* Add CPU capacity and topology on SDM845
* Add display and gpu related nodes on MSM8996
* Add sound and hdmi display support on DB820C
* Fixup thermal nodes on MSM8998 platform
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=99VN
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt
Qualcomm ARM64 Updates for v5.2 - Part 2
* Add ADC temp for temp alarm node on PM8998
* Add ref clks for DSI PHYs on SDM845 and MSM8916
* Add CPU capacity and topology on SDM845
* Add display and gpu related nodes on MSM8996
* Add sound and hdmi display support on DB820C
* Fixup thermal nodes on MSM8998 platform
* tag 'qcom-arm64-for-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: msm8998: thermal: Restrict thermal zone name length to under 20
arm64: dts: msm8998: thermal: Fix number of supported sensors
arm64: dts: msm8998-mtp: thermal: Remove skin and battery thermal zones
arm64: dts: db820c: Add sound card support
arm64: dts: apq8096-db820c: Add HDMI display support
arm64: dts: Add Adreno GPU definitions
arm64: qcom: msm8996.dtsi: Add Display nodes
arm64: dts: msm8996: Add display smmu node
arm64: dts: msm8996: Add graphics smmu node
arm64: dts: sdm845: Add CPU capacity values
arm64: dts: sdm845: Add CPU topology
arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs
arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY
arm64: dts: qcom: pm8998: Use ADC temperature to temp-alarm node
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add cxo_board as ref clk for DSI phy
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tqE5
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt
Qualcomm Device Tree Changes for v5.2 - Part 2
* Add cxo_board as ref clk for DSI phy
* tag 'qcom-dts-for-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY
Signed-off-by: Olof Johansson <olof@lixom.net>
for the rk3328-roc-cc and some minor fixes for rk3399 and rockpro64.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAly/g+YQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgX5oB/0Sub17eWc+RSKRLTKoBZooMK+aS4iEqzl9
T3Um1m0c/zR5XY+cMnmlvBUp9ryu/XEjiX9pi2EiE/Oio2Ty6t4q/4td+9BvH+gb
TbCmNI+ZVWvqrMyRAPjrXT3lJc2dOIWbf9Ej02MdZC/WSG5JfWMKfI8PxZRV4IlW
TSJbQLVVjrVcFk0J2Ov/iDyIuDNBOhN4zUNm3YbBGLJ0Wa0KmoaHa0qtTK5SRcEm
ZUztuzscla5nWo2kXI2Aw2UMiparGaqGT+uAODGdhIbgIsa+o2D9WzAfW4xalvlJ
NSzXvJIHGIDdWmBEku8JNitWh3S85Y4DYfXv/kGqWU6CYGaTqr5z
=Sd0J
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Bulk conversion of remaining gpios to the helper constants, new peripherals
for the rk3328-roc-cc and some minor fixes for rk3399 and rockpro64.
* tag 'v5.2-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: fix IO domain voltage setting of APIO5 on rockpro64
arm64: dts: rockchip: fix cts, rts pin assign of UART3 for rk3399
arm64: dts: rockchip: bulk convert gpios to their constant counterparts
arm64: dts: rockchip: enable display nodes on rk3328-roc-cc
arm64: dts: rockchip: eMMC additions for rk3328-roc-cc
Signed-off-by: Olof Johansson <olof@lixom.net>
and veyron chromeos devices in particular (regulators, suspend, cleanups)
and bulk conversion of the remaining gpios to the helper constants denoting
the iomux.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAly/e34QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgQrnCACfbN22yHoWGSgTan4L08XQ0hkU53t6PNsA
qyuN/IPdI93bRy/RnFE+Fz9ml9mu9FeuPANEIcdAPyG1NIJxo5q/jOh3+3wOmYqD
0ibgmEL0+WoVJcHwCjlCslei5yNn5/8aYaUkXOwYklKTyA79fPpvym55ds6uqgr/
bhgtr0BE+cQKJKVE12FPM9eUSsz/0huRl9NyFbuLGaViJ+2HjHp7M5Cr40/Lepz/
R48t9RJONGeAQtzyMRrIB6d+AqtvADtojwcmCij1ut/tl5WxlVt5McdilfaYmY5B
hWklMi+fwmEu/hwb3ohL4rqRrM+dKAFT2U+MwMek7etqStIW3yHa
=ctep
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Much love for rk3288 in general (power coefficients for the scheduler)
and veyron chromeos devices in particular (regulators, suspend, cleanups)
and bulk conversion of the remaining gpios to the helper constants denoting
the iomux.
* tag 'v5.2-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: vdd_gpu off in suspend for rk3288-veyron
ARM: dts: rockchip: vcc33_ccd off in suspend for rk3288-veyron-chromebook
ARM: dts: rockchip: Add DDR retention/poweroff to rk3288-veyron hogs
ARM: dts: rockchip: Add dynamic-power-coefficient for rk3288
ARM: dts: rockchip: bulk convert gpios to their constant counterparts
ARM: dts: rockchip: Add BT_EN to the power sequence for veyron
ARM: dts: rockchip: Remove unnecessary setting of UART0 SCLK rate on veyron
Signed-off-by: Olof Johansson <olof@lixom.net>
The old "cooling-{min,max}-state" properties for thermal bindings were
ratified to "cooling-{min,max}-level" by commit eb168b70de ("of:
thermal: Fix inconsitency between cooling-*-state and cooling-*-level"),
which were later removed entirely by commit e04907dbc2 ("dt-bindings:
thermal: Remove "cooling-{min|max}-level" properties").
The pwm-fan binding, however, was apparently in-flight in parallel with
that ratification, and so managed to introduce an example of the old
properties which escaped the scope of the later cleanup and has thus
continued to be dutifully copied for new boards despite being useless.
Clean up these remaining undocumented anachronisms to minimise any
further confusion.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add wlan_disable signal hog for rfkill signal on clearfog-gt-8k
(Armada 8040 based board)
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXL7EYQAKCRALBhiOFHI7
1f2CAJ4nM5kwS3ogb4dRIixdHzTVxZZabwCdE2uvCR2nncS4NC05L07TKISs/pk=
=v9Z0
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-5.2-1' of git://git.infradead.org/linux-mvebu into arm/dt
mvebu dt64 for 5.2 (part 1)
Add wlan_disable signal hog for rfkill signal on clearfog-gt-8k
(Armada 8040 based board)
* tag 'mvebu-dt64-5.2-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: clearfog-gt-8k: add wlan_disable signal hog
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add interrupt support for wathdog on Armada 38x
-----BEGIN PGP SIGNATURE-----
iFwEABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXL7DygAKCRALBhiOFHI7
1QmnAJdl9XeceYsBM8ibjRwpeFncEsnIAJ9eC10vVJW1I/GOtxlHczFj68Hs2g==
=mxNK
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-5.2-1' of git://git.infradead.org/linux-mvebu into arm/dt
mvebu dt for 5.2 (part 1)
- Add interrupt support for wathdog on Armada 38x
* tag 'mvebu-dt-5.2-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: armada-38x: add interrupts for watchdog
Signed-off-by: Olof Johansson <olof@lixom.net>
- New board support: imx50-kobo-aura, imx53-m53menlo, imx6dl-eckelmann,
imx7d-mba7, imx7d-zii-rpu2, and vf610-zii-spb4.
- Add i2c, mmc and spi aliases for SoC i.MX35, i.MX50 and i.MX6SL.
- Use new 'reset-gpios' property describing CODEC reset pin for board
mx6qdl-zii-rdu2, imx6qdl-gw5903 and imx6qdl-var-dart.
- Specify viewport count for PCIE block on SoC imx7d and imx6qdl.
- Correct 'ipg' clock of SDMA device for i.MX5, i.MX6 and i.MX7 SoCs.
- Rename MMDC memory controller device to be generic and add MMDC
device for imx7ulp SoC.
- Add OCOTP device support for imx7ulp SoC.
- Improve ZII board DTS by switching to SPDX identifier and using generic
device node name.
- A series from Rui Miguel Silva to add various media related devices
for i.MX7 SoC, and enable ov2680 sensor support for imx7s-warp board.
- Random small updates on various board support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcvnAtAAoJEFBXWFqHsHzO3sMIAJf0bti3jbXU734/K47jXRab
FzyAomL2OyblolwUKjpWjpC84xQy1/3v8Y3V5YCu8X4GdGVoOLkzk5VFKZJPA78k
UAfvxTY1fGgi7F+UM0aTgB7Gar7BaRnXbdHb14P/9xNyaIrkqmJ4jRXQOx5LU55m
pG6ej3E691N4OYycdayN4RY/7XS/afv57+W6B1uDJF/5PP5lCGAC0HxWVBvHoxCW
a0oCifjINI5ND/kQFIgUlrdcBaVR9CkoonQAPMPHG1CDBJa7t9MaJUt1WT0d4sxT
RSmfGrJRhsCRHHP5DGPjT4Fg41WXCZF55a45gsL9PTSuwYUmhUOzuHnOys3bUDs=
=u6zj
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm device tree update for 5.2:
- New board support: imx50-kobo-aura, imx53-m53menlo, imx6dl-eckelmann,
imx7d-mba7, imx7d-zii-rpu2, and vf610-zii-spb4.
- Add i2c, mmc and spi aliases for SoC i.MX35, i.MX50 and i.MX6SL.
- Use new 'reset-gpios' property describing CODEC reset pin for board
mx6qdl-zii-rdu2, imx6qdl-gw5903 and imx6qdl-var-dart.
- Specify viewport count for PCIE block on SoC imx7d and imx6qdl.
- Correct 'ipg' clock of SDMA device for i.MX5, i.MX6 and i.MX7 SoCs.
- Rename MMDC memory controller device to be generic and add MMDC
device for imx7ulp SoC.
- Add OCOTP device support for imx7ulp SoC.
- Improve ZII board DTS by switching to SPDX identifier and using generic
device node name.
- A series from Rui Miguel Silva to add various media related devices
for i.MX7 SoC, and enable ov2680 sensor support for imx7s-warp board.
- Random small updates on various board support.
* tag 'imx-dt-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (59 commits)
ARM: dts: imx7s: Specify #io-channel-cells in ADC nodes
ARM: dts: vf610-zii-dev-rev-b: Specify CS as GPIO_ACTIVE_LOW in spi0
ARM: dts: vf610-zii-dev: Mark i2c0 SCL as GPIO_OPEN_DRAIN
ARM: dts: Add support for ZII i.MX7 RPU2 board
ARM: dts: bugfix tqma7 soft reset issue
ARM: dts: imx53: Add Menlosystems M53 board
ARM: dts: imx53: Rename M53 SoM touchscreen node
ARM: dts: imx6dl-sabreauto: update opp table for auto part
ARM: dts: imx: Use generic node names for Zii dts
ARM: dts: imx: Switch Zii dts to SPDX identifier
ARM: dts: imx6q-logicpd: Shutdown LCD regulator during suspend
ARM: dts: imx6q-logicpd: Enable Analog audio capture
ARM: dts: imx6sll: add cooling-cells for cpu-freq cooling device
ARM: dts: imx50: Add Kobo Aura DTS
ARM: dts: imx6qdl-var-dart: Use new CODEC reset pin name
ARM: dts: imx6qdl-gw5903: Use new CODEC reset pin name
ARM: dts: mx6qdl-zii-rdu2: Use new CODEC reset pin name
ARM: dts: imx50: Specify IMX5_CLK_IPG as "ahb" clock to SDMA
ARM: dts: imx51: Specify IMX5_CLK_IPG as "ahb" clock to SDMA
ARM: dts: imx53: Specify IMX5_CLK_IPG as "ahb" clock to SDMA
...
Signed-off-by: Olof Johansson <olof@lixom.net>
