mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
932,869 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Olof Johansson
|
ea1b42170f |
Renesas ARM Based SoC DT Bindings Updates for v5.2
* R-Car M3-N (r8a77965) SoC - Remove non-existent A3IR power domain * Add vendor prefix for Silicon Linux -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAly521wACgkQ189kaWo3 T771vhAAjLwe/q0/d0bLpWOmIPieWcXrtp6yhpSnV5adGWvdL3NqCeNb4P/MMEwm wpGSgPb2WfDpSOTc9rqId9J/QzCvXUyuTdl63tFIUxQbA3lyow+YtpgGKic1zHA1 baAgsypQIhnMal27ggKcDQaViJR+mXDVYnk/l8059vNKT7RbWAOspCqZ3Bj2caDG CJcIVDOqUG/P+4Ybpj0WSsoB/wEsuP1BGdZJAZ3EhrLP+QMWSHnWaJC+tHLq7IMo 8xgOnqeEfh3qNLnFrAcNM8NID11PQm6xRT4xIXhE9lqXlwISxk7+6z9NlStlEA9S JTeEE1bqov2b+MXkLVV6DOa0y54YVSk+T4Ap+al0aX5O+IjNXY8GZyFMIb4VuvJW m34vRUxnTUbL5q/DCwwQ0uD/DZWDLKkF/KOru0I+LGDV+oA+5rawXqykM66rnZ3V 5qzdNkizVTGV2GHfgaoZRksiZ0RZJOzqgRAIsXzgFcaxEn5o9uVe2UVneb5+pYtr 6OP5J7ksEBU/VVAThpoX0mVWhjM/IWph/DDSSslotGwLYeUzSjqHixopOclXHukV 6JiUKnOe/Q1IuIIRy+xoDrK7wmzC15rKqkNmK4nWJP+WmmCtXlkn2Nsqybq2tiF0 R2KhjAGszN0/SBw6/3PhyEc3pW0m01BL2jzKJ2nTTMJeUu3RgkY= =8e0v -----END PGP SIGNATURE----- Merge tag 'renesas-dt-bindings-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Renesas ARM Based SoC DT Bindings Updates for v5.2 * R-Car M3-N (r8a77965) SoC - Remove non-existent A3IR power domain * Add vendor prefix for Silicon Linux * tag 'renesas-dt-bindings-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: dt-bindings: power: r8a77965: Remove non-existent A3IR power domain dt-bindings: Add vendor prefix for Silicon Linux. Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
c00671c6d0 |
Renesas ARM Based SoC DT Updates for v5.2
* R-Car E2 (r8a7794) based Alt board - Enable USB and DA9063 PMIC * R-Car V2H (R8A77920) based Blanche board - Enable IIC3 and DA9063 PMIC * RZ/G1C (r8a77470) based iWave SBC - Enable HDMI, USB Phy[01], USB2.0 Host and HS-USB * RZ/G1C (r8a77470) SoC - Describe DU, VIN, PWM and HSCIF, USB PHY, USB2.0 Host and HSUSB in DT * RZ/A1H (R7S7210) based rskrza1 board - Enable remaining LEDs and I2C * R-Mobile A1 (r8a7740) based ape6evm, R-Car H1 (r8a7779) based marzen, R-Car M1A (R8A7778) based bockw and Emma Mobile EV2 based kzm9d boads - Tidy up bootargs * R-Mobile A1 (r8a7740) based ape6evm - Enable NOR FLASH -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAly5a1oACgkQ189kaWo3 T75nFBAAlpilL1lHAzKp9ULF4DEuHRHLaYa4UhFAXWHXEF0hKPrG2/ibwFcHUxf5 fWuopUIIWqXhGb/p99EzErjjA5+l+qTx7WQWASownti94DQA8Scp9KT0NTGSupw5 nuu9EWS9epeAxH47uCC3DePVlL30uQ3bdaQazC6ULWU0SCVmZIl4tnWWL+YXPirC Gzxez7EttiU3KEaAH+3gVJJreqEpxVNLT8kd/sxXxfGn12mlosyCmb4f20A5erMq F5d2sVtR5AgAm+nALjPjXb6XstnzIDuca6ZYKmlkKZRMTxYObdek96EAGyL15HTi sGdtnsk6cZZ08veVHRMD5NCyNKNw6aCdWTfNPw4+JW5k3boVgWIQFjrJD6fhwo4c wN/DXCfT4WGwK0ok42EuRA2mEJl6PPin7Pf40j+wgO5pYEc+0zu38WTJ2/R0IezA ej3Itgdvaw2zWlfjKw4Sobexph2uvw93Kd+LuRU7yDpuEp6jJVC/n5IoV8ozP5zg qRw/H3e/po/F7UXe7/mdas7XcWdrxZ9kTi7a6JTJDMf7/RTB97+yURFPMPU2CdeW 5YQJUHG4oZIJO6vHnbmSEi8JA69eM8ecoiRYNP+DUpfz/wp2iUKYYNbRkeKloy+C TrAHR3RXGh6zttiLrtC8Adch4GePUJf8aS0BWIip8/+TueupkOM= =rKrw -----END PGP SIGNATURE----- Merge tag 'renesas-arm-dt-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Renesas ARM Based SoC DT Updates for v5.2 * R-Car E2 (r8a7794) based Alt board - Enable USB and DA9063 PMIC * R-Car V2H (R8A77920) based Blanche board - Enable IIC3 and DA9063 PMIC * RZ/G1C (r8a77470) based iWave SBC - Enable HDMI, USB Phy[01], USB2.0 Host and HS-USB * RZ/G1C (r8a77470) SoC - Describe DU, VIN, PWM and HSCIF, USB PHY, USB2.0 Host and HSUSB in DT * RZ/A1H (R7S7210) based rskrza1 board - Enable remaining LEDs and I2C * R-Mobile A1 (r8a7740) based ape6evm, R-Car H1 (r8a7779) based marzen, R-Car M1A (R8A7778) based bockw and Emma Mobile EV2 based kzm9d boads - Tidy up bootargs * R-Mobile A1 (r8a7740) based ape6evm - Enable NOR FLASH * tag 'renesas-arm-dt-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (21 commits) ARM: dts: ape6evm: Reorder bootargs ARM: dts: marzen: Add rw to bootargs and use ip=dhcp ARM: dts: bockw: Reorder bootargs ARM: dts: kzm9d: Add rw parameter to bootargs ARM: dts: iwg23s-sbc: Enable HS-USB ARM: dts: r8a77470: Add HSUSB device nodes ARM: dts: iwg23s-sbc: Enable USB USB2.0 Host ARM: dts: r8a77470: Add USB2.0 Host (EHCI/OHCI) device ARM: dts: iwg23s-sbc: Enable USB Phy[01] ARM: dts: r8a77470: Add USB PHY DT support ARM: dts: r8a77470: Add VIN support ARM: dts: r8a77470: Add PWM support ARM: dts: r8a77470: Add HSCIF support ARM: dts: alt: Enable USB support ARM: dts: rskrza1: Add remaining LEDs ARM: dts: rskrza1: Add I2C support ARM: dts: iwg23s-sbc: Add HDMI support ARM: dts: r8a77470: Add DU support ARM: dts: ape6evm: Add NOR FLASH ARM: dts: alt: Add DA9063 PMIC node ... Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
64f32d9d30 |
Second Round of Renesas ARM64 Based SoC DT Updates for v5.2
* R-Car H3 (r8a7795), M3-N (r8a77965) and E3 (r8a77990) SoCs - Describe CMT devices in DT * R-Car M3-N (r8a77965) SoC - Remove unecessary reg-names of display node * R-Car V3H (r8a77980) SoC - Add missing "renesas,id" property to VIN of device tree * RZ/G2E (r8a774c0) based CAT874 board - Add USB-HOST support -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAly52g0ACgkQ189kaWo3 T77vmw/+I4Rl6nK3aN3Drowy6rXFw3qO4Lxdudva7auV65VKcdIjeQQueyQBLslq 5/9T6K/1ewcKYy9fMWS14lyw6O2gmZD5WUeqFlmsxzXqr/0e2X3cOJ/gB7yg3I4+ PGDiFH9L4AV09eZM/emPvoh8gUKi6kL7A2MrCdv8+8qyTyV3kWvJKAtodRgh22RJ BSEuNXAJts03af/8QPCYpu2kkRHIzTqBN5AKnLAy0UafMWVNDR+I1ynOTJ6wyDV+ 0wckrti4uTU25khZbr+bnn/jth7L02ejztU/A186JydgoPAZJ5b3l7rKlMLAMhP3 6JCLm/9aKsVd+72mKBjubfNHIBz49zQM2pVADQ7prYFMA9iBuBngTfZUwRFzTWCd fx45s+9rTYZa3en3Q4l4gO0lPL6HTfdaQZgqSpC3CBG2Tri5KqNIBWo7eTp8eJIp +lBRe0djW8/Z8kwx3x8c/wCVORR5cqYKtlMj0X3S6rVvQsUQsOGz0Mm5gyJrQQfI MKT5C+R8Pup8GX3wR9lk1Pf8F8Rw8FOVmEfAleJA7z6anri7icy9ttA/49OriF6N RB2W473dElQSYeSNFkX2jrSigxw8PlXkwgjwU9mBRiODWxKZOznGErK4JCVzVybR MVERKLH9wmMypdB6drhpmSbkrKoaMjdwaPmMpfPi+LguU3v0ueI= =FMAR -----END PGP SIGNATURE----- Merge tag 'renesas-arm64-dt2-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Second Round of Renesas ARM64 Based SoC DT Updates for v5.2 * R-Car H3 (r8a7795), M3-N (r8a77965) and E3 (r8a77990) SoCs - Describe CMT devices in DT * R-Car M3-N (r8a77965) SoC - Remove unecessary reg-names of display node * R-Car V3H (r8a77980) SoC - Add missing "renesas,id" property to VIN of device tree * RZ/G2E (r8a774c0) based CAT874 board - Add USB-HOST support * tag 'renesas-arm64-dt2-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: renesas: r8a77980: Add "renesas,id" to VIN arm64: dts: renesas: r8a77965: Remove reg-names of display node arm64: dts: renesas: r8a77990: Add CMT device nodes arm64: dts: renesas: r8a77965: Add CMT device nodes arm64: dts: renesas: r8a7795: Add CMT device nodes arm64: dts: renesas: cat874: Add USB-HOST support Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
68a3ead584 |
Allwinner H3/H5 changes for 5.2
Our usual bunch of changes shared between arm and arm64, the most notable one being: - Fix of improper usage of DT bindings, thanks to the DT validation - Add the SID for the H3 and H5 - New board: RerVision H3-DVK -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXLm2aQAKCRDj7w1vZxhR xQJYAQDs7mcoEHwBqw+1iZGmHZuvj4jJXdAd/FkmoujMawaGoQD/a4zddy8AL7s9 WA9I42cSuBwfZjftLX/br4Ycssd1sgQ= =90I8 -----END PGP SIGNATURE----- Merge tag 'sunxi-h3-h5-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner H3/H5 changes for 5.2 Our usual bunch of changes shared between arm and arm64, the most notable one being: - Fix of improper usage of DT bindings, thanks to the DT validation - Add the SID for the H3 and H5 - New board: RerVision H3-DVK * tag 'sunxi-h3-h5-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: mapleboard: Remove cd-inverted ARM: dts: sunxi: h3/h5: Remove useless phy-names from EHCI and OHCI ARM: dts: sun8i: h3: bluetooth for Banana Pi M2 Zero board ARM: dts: sun8i: h3: Add default dr_mode ARM: dts: sun8i: h3: Refactor the pinctrl node names ARM: dts: sunxi: h3/h5: Remove stale pinctrl-names entry ARM: dts: sunxi: h3/h5: Add device node for SID ARM: dts: sun8i-h3: Add support for the RerVision H3-DVK board Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
b76cabc9de |
Allwinner arm64 DT changes for 5.2
Our usual bunch of patches, the most notable one being:
- Fixing the DTC warnings
- Fix DT bindings not being properly respected, thanks to the DT
validation
- New Board: Oceanic 5205, Beelink GS1, Orange Pi3
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXLm03gAKCRDj7w1vZxhR
xVkaAP4qZrFTs5vzvZU0yl9B/26eX9MxlMEmeQ30pQRAFT3PDQEA7Wzb7LWABPvV
rXhqQSt7Xwbga9XmKP3DAMjh+SZwGw8=
=+coj
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Allwinner arm64 DT changes for 5.2
Our usual bunch of patches, the most notable one being:
- Fixing the DTC warnings
- Fix DT bindings not being properly respected, thanks to the DT
validation
- New Board: Oceanic 5205, Beelink GS1, Orange Pi3
* tag 'sunxi-dt64-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (22 commits)
arm64: dts: allwinner: a64-amarula-relic: Add OV5640 camera node
arm64: dts: allwinner: a64: Add pinmux setting for CSI MCLK on PE1
arm64: dts: allwinner: Fix DE2 bus node name
arm64: dts: allwinner: Remove useless phy-names from EHCI and OHCI
arm64: dts: allwinner: h6: Add MMC1 pins
arm64: dts: allwinner: h6: Add Orange Pi 3 DTS
arm64: dts: allwinner: h6: Introduce Beelink GS1 board
dt-bindings: vendor-prefixes: add AZW
arm64: dts: allwinner: h6: move MMC pinctrl to dtsi
arm64: dts: allwinner: h6: Add device node for SID
arm64: dts: allwinner: a64: Fix the Codec I2S binding
arm64: dts: allwinner: a64: Add default dr_mode
arm64: dts: allwinner: Fix pinctrl node names
arm64: dts: allwinner: a64: Add missing PIO clocks
arm64: dts: allwinner: a64: Fix display pipeline endpoints
arm64: dts: allwinner: a64: Fix the TCON output clock
arm64: dts: allwinner: h6: Add Video Engine node
arm64: dts: allwinner: a64: Add cross links for the mixers
arm64: allwinner: a64: Add Oceanic 5205 5inMFD initial support
dt-bindings: Add vendor prefix for oceanic
...
Signed-off-by: Olof Johansson <olof@lixom.net>
|
||
|
Olof Johansson
|
f5d6e8c077 |
Allwinner DT changes for 5.2
This PR is pretty significant, but it been mostly about:
- Fixing the DTC warnings in most of our DT. We're now down to 2
warnings, from several thousands.
- Fixing a good number of minor issues, typos, and so on thanks to the DT
validation tools
- Describe the MBUS controller and the special DMA RAM mapping on the A13
- Add support for the LRADC on the A83t
- Add support for the I2C bus used for the PMIC on the A33
- Start using the DT annotation /omit-if-no-ref/ on our pinctrl nodes
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXLmxsgAKCRDj7w1vZxhR
xQs0APwIUuCrLfRD0av6xeCI4bon+G6drCxNVqkgf/cm3sAd5AEAzd6Ok74CEJar
xlSPxgqpBxCVyt2bxQxfN5mch2OPKgA=
=HH/F
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Allwinner DT changes for 5.2
This PR is pretty significant, but it been mostly about:
- Fixing the DTC warnings in most of our DT. We're now down to 2
warnings, from several thousands.
- Fixing a good number of minor issues, typos, and so on thanks to the DT
validation tools
- Describe the MBUS controller and the special DMA RAM mapping on the A13
- Add support for the LRADC on the A83t
- Add support for the I2C bus used for the PMIC on the A33
- Start using the DT annotation /omit-if-no-ref/ on our pinctrl nodes
* tag 'sunxi-dt-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (65 commits)
ARM: dts: sun8i: a83t: Enable USB OTG controller on some boards
ARM: dtsi: axp81x: add USB power supply node
ARM: dts: sun5i: Reorder pinctrl nodes
ARM: dts: sun6i: i7: Remove useless property
ARM: dts: sun4i: lime: Fix the USB PHY ID detect GPIO properties
ARM: dts: sun4i: protab2: Remove stale pinctrl-names entry
ARM: dts: sunxi: Remove useless phy-names from EHCI and OHCI
ARM: dts: sun8i: v40: bananapi-m2-berry: Sort device node dereferences.
ARM: dts: sun5i: Add the MBUS controller
dt-bindings: sunxi: Add compatible for OrangePi 3 board
ARM: dts: sun8i: a83t: Add I2C2 pinmux setting for PE pins
dt-bindings: arm: sunxi: Add Beelink GS1 board
ARM: dts: sun8i: tbs-a711: Add support for volume keys input
ARM: dts: sunxi: Add R_LRADC support for A83T
ARM: dts: sunxi: Improve A33 NAND transfers by using DMA
ARM: dts: sun8i: tbs-a711: Enable UART2 (for NEO-6M GPS module)
ARM: dts: sunxi: Remove useless pinctrl nodes
ARM: dts: sunxi: Remove pinctrl groups setting bias
ARM: dts: sunxi: Remove useless address and size cells
ARM: dts: sunxi: Conform to DT spec for NAND controller
...
Signed-off-by: Olof Johansson <olof@lixom.net>
|
||
|
Olof Johansson
|
14d55a3df4 |
arm64: tegra: Device tree changes for v5.2-rc1
This contains a bunch of changes all across the board. Perhaps the most notable introduction here is support for the Jetson Nano Developer Kit. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAly4jscTHHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zoTevD/9jwO9JSPox9Cuy/d1V+R4XXk5xbf3i c+oMpWqWMmkQMkEi6VA8w76WpRej5WyClCvxbY9cdoY5xpNYpnLN6sw2c6kMCwC1 EYM7BVuJh1DLTfUWbj8N7TTxZP5+PtKDWRAVfgnq9i4W52WjfwlUdJt8OmPd4KFf zHiSmf4oJiz5aiIX/fqQf852HE9lpijnWrHcsdDqRzBh64O83jO52JF3bBEnwg23 x1i1aMzlYrOoNmAJHZxUxfFG+/qF6BcKY7ba7DQOIHXGBwUKGDMbELNLg4yuS0So NcEVsZZEjTtOYmzMWKqm3wSQISYSguU43QtyRBkBZLOrHvEQRjgNRKs3Bmvug7L3 jCwA/qyA7kkYeBr9gn9CfE42ih8Az5dki38rzo5vfXqF6fALIf+J7MIur+p08kBk VOzMvDPT2FWXlykSfOaCq6ppdo0Fh88qDFxTCx97nYm6s7NDw1ZUI1IDZ0JgoA7n YqH0bC9WDAyA17gsyUH+mynvLiQvJ4kpAIaYa2JxlITXt05L5mTHEpsnelcSOrOx K96/M3r+z6/1OP68IqPWC0oh3adwJ9tuVZv2iO//cWeEXwO48wH6KERYJqG6cYLk x+tFhNPBy8U4x0FIEbpXW7s9bKWD07TpDijRDa4NriegkpTPmEm644QRPsBEgQuX qtzaoIrFFGOJIg== =V3kv -----END PGP SIGNATURE----- Merge tag 'tegra-for-5.2-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt arm64: tegra: Device tree changes for v5.2-rc1 This contains a bunch of changes all across the board. Perhaps the most notable introduction here is support for the Jetson Nano Developer Kit. * tag 'tegra-for-5.2-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Remove regulator hacks on Jetson TX2 arm64: tegra: Enable XUSB on P2771 arm64: tegra: Add XUSB and pad controller on Tegra186 arm64: tegra: Add NVIDIA Jetson Nano Developer Kit support arm64: tegra: smaug: Move PLL power supplies to XUSB pad controller arm64: tegra: jetson-tx1: Move PLL power supplies to XUSB pad controller arm64: tegra: Enable command queue for Tegra186 SDMMC4 arm64: tegra: Fix default tap and trim values arm64: tegra: Add supply for temperature sensor on P2888 arm64: tegra: Enable aconnect, ADMA and AGIC on Jetson TX1 arm64: tegra: Add L2 cache topology to Tegra210 arm64: tegra: Enable CPU idle support for Shield arm64: tegra: Enable CPU idle support for Smaug arm64: tegra: Enable CPU idle support for Jetson TX1 arm64: tegra: Add CPU idle states properties for Tegra210 arm64: tegra: Fix timer node for Tegra210 Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
c076dd723e |
ARM: tegra: Device tree changes for v5.2-rc1
This contains a set of changes to move PLL power supplies to the XUSB pad controller, which is necessary to ensure the proper sequencing during boot. Other patches in this set clean up usage of SPDX license identifiers in device tree files as well as add support for the ACTMON hardware on Tegra30. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAly4jj0THHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zoVtzEACmrojN8vh3Au0dZ8m7h+DyscYFlOFW nQ+sSav8SR9j+MhpUGfMOPY7Hk4AjGwOM0zV5EW91hfnRl0BdyWPhAhD8xiT0lnG sa/alwIScWSWpAHvoJ7jro0/8pLkNh5G98mpxJlHcyNOQWXW/L35H/8XdtgLMXng mgoQpLigzwpS6Q31TA6BdhelRPJ6pibkHsy1FErrMheHdyRAhlS+mJTfgOGp0OP4 T/cMn5gc/Shdy4mJl4K6t/vQ7fMkxNnfqOCa2q4mDDo254tuOU5GPG5pG16yw6Xp 2p9JYXa9sdTLFTfa4QcQubujm1DVqTml11yOStuetYOklWTowbxyqGoCggHZZZTi FiLKylnfwVlDEaCUu+IP6bsW2zgmovfKuZooKYDT2A8yimZYixYPZbmMmYyGIDEr GxtP++f9GSqgqDSQLOYfPgtoOAWe74nhPEZFzlyeC/CKZQvZeEG/OiVEIUdfglkj SMrvQ9Wb8K/sqjlj2p5p0/SLdUHAz/DgTBm7MDz0IAdurYL5bGwE0qULZDQPeF3s 43mkuX/E4F31S2yUelyi7GkMAZVdo5WqqKN+Fq8S3QTm8QUuZTx4bVBgdJhzOnVS WniclDYTguK4LNCE9ryGNXsN5/T9f1RE5JTd4VqMW9+oLu8e32EGP5QxWYTGpD/5 R3EF+VYdwK60Zw== =Gc2T -----END PGP SIGNATURE----- Merge tag 'tegra-for-5.2-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.2-rc1 This contains a set of changes to move PLL power supplies to the XUSB pad controller, which is necessary to ensure the proper sequencing during boot. Other patches in this set clean up usage of SPDX license identifiers in device tree files as well as add support for the ACTMON hardware on Tegra30. * tag 'tegra-for-5.2-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Add ACTMON support on Tegra30 ARM: tegra: venice2: Move PLL power supplies to XUSB pad controller ARM: tegra: nyan: Move PLL power supplies to XUSB pad controller ARM: tegra: jetson-tk1: Move PLL power supplies to XUSB pad controller ARM: tegra: apalis: Move PLL power supplies to XUSB pad controller ARM: tegra: Remove gratuitous parentheses in SPDX license identifier ARM: tegra: Convert to SPDX license tags for Tegra124 Apalis Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
7996313656 |
Add am335x pinmux defines and start using them
This series of changes adds a new pinmux instance defines for am335x, and a new AM33XX_PADCONF macro. And then the rest of the series updates the dts files to use it. The reasons for doing this is the pinmux configuration has been hard to use and read. And we need to do this for eventually for moving to use values. This change is done one machine at a time, and can be easily reverted as needed in case of unexpected trouble. The old macro is still working, and we're planning to keep it around until we eventually change to use -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAly18IoRHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXPwQA//ajq5abErjoCtPQrf/4bv9NdZQcBkRaHa k4pZ8hgWvLQYzNDZirQhe174UUCUUIdc7yppRYzgjqYmWLvNHSs4ax9SeBKn1bHd 40gZMzmJeHByRNjK1WHHUBLXtuMRIbOk7k4Lcgqi3en1a9jHnJaq0h/Xde69nrWz rjcewWEbZeqYvIRZJDv17vbY3DY6gebP3DQzKLEX89vTfMJF0vgTm6YVskhW1Jtx 3Coj/M5e3//gDRBD8bpLdOac1irQe2+MMFMh4GH9ctF9/ZK45cXKz3p8j+em0YgJ yYXimAFqVY0lQuFNC6L/PfsQ8YDSuVTHqTS6vajZvqoDB4wMsYjw8ivag5S0NpqV baaft1SyQ1x7YeuKny/jSZ+1vYIe2Omms45Dc3JYLX2EltLDDEzriPpohIcqetOp XJfxAEFbAU9Mk1tMSS8hvpoj9ezodQz3tYS8Mwc15Dg2SDfT7yya1kDowOpVa9sn MKvFZ5jIfYdq3es/vDm9sa0qunmQBX1iM5Jzp1u+GUYa5p7kTcojCd++FoR7/do5 R2V96N8NaxUTATCEpMCxCJsSYeQrc4ZmnUWBHRVntQJrPxolTwRpH3yEWMBFN4l1 7XU56mEkDzXQMnHJbrzOyNWa/iAmYqUJXU9WbvrmMOv3ZMro7NqIl5mD46XkBBBK 8BzayzP1QRg= =QimO -----END PGP SIGNATURE----- Merge tag 'omap-for-v5.2/dt-am3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Add am335x pinmux defines and start using them This series of changes adds a new pinmux instance defines for am335x, and a new AM33XX_PADCONF macro. And then the rest of the series updates the dts files to use it. The reasons for doing this is the pinmux configuration has been hard to use and read. And we need to do this for eventually for moving to use values. This change is done one machine at a time, and can be easily reverted as needed in case of unexpected trouble. The old macro is still working, and we're planning to keep it around until we eventually change to use * tag 'omap-for-v5.2/dt-am3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (38 commits) ARM: dts: am335x: wega: Replaced register offsets with defines ARM: dts: am335x: sl50: Replaced register offsets with defines ARM: dts: am335x: shc: Replaced register offsets with defines ARM: dts: am335x: sbc-t335: Replaced register offsets with defines ARM: dts: am335x: sancloud-bbe: Replaced register offsets with defines ARM: dts: am335x: phycore-som: Replaced register offsets with defines ARM: dts: am335x: pepper: Replaced register offsets with defines ARM: dts: am335x: pdu001: Replaced register offsets with defines ARM: dts: am335x: pcm-953: Replaced register offsets with defines ARM: dts: am335x: osd335x-common: Replaced register offsets with defines ARM: dts: am335x: osd3358-sm-red: Replaced register offsets with defines ARM: dts: am335x: nano: Replaced register offsets with defines ARM: dts: am335x: moxa-uc-8100-me-t: Replaced register offsets with defines ARM: dts: am335x: moxa-uc-2101: Replaced register offsets with defines ARM: dts: am335x: moxa-uc-2100-common: Replaced register offsets with defines ARM: dts: am335x: lxm: Replaced register offsets with defines ARM: dts: am335x: igep0033: Replaced register offsets with defines ARM: dts: am335x: icev2: Replaced register offsets with defines ARM: dts: am335x: evmsk: Replaced register offsets with defines ARM: dts: am335x: evm: Replaced register offsets with defines ... Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
a41332dd5e |
SoCFPGA DTS updates for v5.2
- Add base support for Agilex platform - Add 'cap-mmc-highspeed' Stratix10 and 32-bit SoCFPGA platform - Increase Stratix10 QSPI support to 100 MHz -----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEoHhMeiyk5VmwVMwNGZQEC4GjKPQFAly1Mv8UHGRpbmd1eWVu QGtlcm5lbC5vcmcACgkQGZQEC4GjKPS7mg//d56np59wWQ1k4wP7FFo3ewnNcqdu Zr3e2T586KCRFpCAH2zsY32jzPLPgzgX0ssiXg4FDr8Q0tptDfYFtkzUfM+9J8LH 91VhGCUoq3YfKudnovl4vOo9QLTXyXxm9qSv4MN+8z+np/uLOc05qWFrPS6Ylh0O cYcC/1hif8svnxziH9d7QwF3Eely8aYAETY4waQVG5SDkzVMG9JuecC8rfxfOyCv uMy4jBTeOY7xDAJwl0yILPcI3qLZX97AoBUD64b7TmgGkrraSm9xijDmQKRFgFlz r42Ze4o1kjY+iKYefyXJiE+k4TQUoark8V0tBLst8KujiveH6gPQ8T8s75d0djFj r9koVafOege64KsY3Gdrkkv7e9vI8oCqcy/dvoApb9RBA3X+4V/gXJCZxv5KPOcn t3/swEsHKYnmJ1GumkmCnO+2aGKkDcJewJkQrnU4DNC8AVyGOyehPu9kqYfrMC3g eODzoHWC+4ZKltglfxP0mihqXHXcdYrSHfxAKtWAZyTect20w5w3dCsvvvpoxaA2 gYr008kqrGVIxumpCZlbaEVnr/0PnHdiMstIWMVsIOsvs8EuvQrbmJJS2TSqhhI0 gUFyADgnh4RCV/cD3EeYC9dokM6Ms2SDB/r7QdnQG1aELkVi51hSJf201w6fYemI Uq1EBLmMGaF8zow= =PxBZ -----END PGP SIGNATURE----- Merge tag 'socfpga_dts_updates_for_v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.2 - Add base support for Agilex platform - Add 'cap-mmc-highspeed' Stratix10 and 32-bit SoCFPGA platform - Increase Stratix10 QSPI support to 100 MHz * tag 'socfpga_dts_updates_for_v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA arm64: dts: stratix10: increase QSPI max frequency to 100MHz arm64: dts: stratix10: enable MMC highspeed support ARM: dts: socfpga: enable MMC highspeed support Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
d7f76ac4dc |
Ux500 DTS changes for the v5.2 kernel cycle.
- This adds the MCDE display controller and some displays. - The Lima MALI-400 driver is added to the kernel, so let's add this block to the Ux500 DTS file. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJct5oFAAoJEEEQszewGV1zpwsQAJ0pbd2GkXZ0AfmbTr8qgJmn Dy8rxTwI7cmdTI1RnQNANTwvhypZDeslZ6tCb/5KqSE7cC6gSy7c+QaTiWfjSYud NQt/vMrQI+ijOq+shABnk6S4ig2G4WDbCW04cKlWSODbH+bAdJ5LFNkiAeTR0DRm n8OjzottC+jbICz/D4o07yZv/MesmVJziC+i8DnYZlEIWGPCpNHmXGaVi5fOFue0 ty83/C/lKMb///9XNuvTR4X03R+yARb0n54pQ/bo1eECq9zc2qcX6iXEOYiQLHul tHKYY6MC7wEIpPJ4uNDtsFvIeAUsI6RWgtDGbnh8zUecpYKDbwbyV7KOFIMF/NEd eG7ZHaguWhXIcHoYCEyunmUSdVFQJjPk8dfk7M+Fv9wCqihOoGRlyi0mEZCuypEA YTi27mBAUQEWn6Ub1V/vRdILmh2ACBXn5kntJYq4RYofH1FkyuZ8FK5pxb7uV3zy w0fhy2ZZMtAQ5+iD0YyCaehcSE7FR3C7aIPnV5BBXaIRRAZWQUqSP2xGd8hs++J0 /0hSEO2NNg7067XMAJyl4aUjUbO2kBzvX5PeKpm8l6CtRnQLoO0wUFiaInM7IxjC wJWgd2o0ht9ZPNoTCcptSqd7q0zrDnK+kSXjswOEy1Qn77bb5relXEykPoBYwjIv Oe+k3VpboUWbIvpH340D =IT/9 -----END PGP SIGNATURE----- Merge tag 'ux500-dts-v5.2-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt Ux500 DTS changes for the v5.2 kernel cycle. - This adds the MCDE display controller and some displays. - The Lima MALI-400 driver is added to the kernel, so let's add this block to the Ux500 DTS file. * tag 'ux500-dts-v5.2-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: dts: Ux500: Add MCDE and Samsung display ARM: dts: ux500: Add Mali-400 Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
da9a4c3d32 |
Devicetree changes for omap4 and 5 l4 abe interconnect
This series of devicetree changes adds the l4 abe interconnect devices and moves the devices to their right places in the hierarchy similar to what we've already done for most l4 devices earlier. We first add a shared omap4-mcpdm.dtsi to make adding omap4-l4-abe.dtsi easier for the mcpdm changes. And as earlier, in case of unexpected trouble, devices can be probed the old way by moving one device at a time to the old place. This series of changes depends on the ti-sysc driver changes for handling the external optional clocks that the mcpdm relies on, and is based on the related ti-sysc driver changes. Note that this series does not depend on dropping of the leagcy platform data, but I already had those committed along with the ti-sysc driver changes and noticed too late. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAly0qJARHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXMMshAAq4XkZYB07CcMugY8WO0SA1fj42CfIMis NWqexA3K2dpwnPlj8jaAd0d5Xlmr+2S25IMHCP8qk8K+t8aFGmTfQsKif1irfk9D Xp+8burVIZKMQcxXHfaJKTlTXCFkE6ha+Kb6sYnYjOB/lXP7rsHCn0O7MPY54Uip a/z/NN3M1yMdJPoZZyPRaWD6nSd62FYC8hOqAlCvBe5qEM4CWdvINvvW4FMyRHCW UHhGVvcyGV3UtiTmInQTnvbw5Ha38QESkJrhm0JnItBrxaUOfPfXnHfgZprBTO8G yFQwMhKmokehWAO+1PiULzHdE5UiYKoy+eNgooYIM1wSor0dn9UoAThW4D69cET7 azY0xXAVzFtFc75IOgD3HWo9p00faGLW2hQP+XxAtPCQnGfR26PzCHk+VzR3b608 q40U6pkZCQ2g1P99fDDJostPz8ZuDG4vB5bE5yVwhbIWXjQWhyReJFCYoZD4hiFh k4l5y7iPAxGndn7AjrAV7iUmqUZBJcuk+qu7YEb+nrMwwbWJA1g8+6zxYFl7TXJt ihsOEWBQninNJ1PvesGr9DjWAvmmhQq/wtSSChd5/SGfHI9HVNedJJEFCcozrRLf RIerncFUXKIVXV1ZNJMaQ3/U2r1f5a3867SvqeR5IGIIMhHyvVi5HXwzzB6Znszz DTmI0uAU4FA= =P5Js -----END PGP SIGNATURE----- Merge tag 'omap-for-v5.2/dt-ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omap4 and 5 l4 abe interconnect This series of devicetree changes adds the l4 abe interconnect devices and moves the devices to their right places in the hierarchy similar to what we've already done for most l4 devices earlier. We first add a shared omap4-mcpdm.dtsi to make adding omap4-l4-abe.dtsi easier for the mcpdm changes. And as earlier, in case of unexpected trouble, devices can be probed the old way by moving one device at a time to the old place. This series of changes depends on the ti-sysc driver changes for handling the external optional clocks that the mcpdm relies on, and is based on the related ti-sysc driver changes. Note that this series does not depend on dropping of the leagcy platform data, but I already had those committed along with the ti-sysc driver changes and noticed too late. * tag 'omap-for-v5.2/dt-ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (44 commits) ARM: dts: Add l4 abe interconnect hierarchy and ti-sysc data for omap5 ARM: dts: Add l4 abe interconnect hierarchy and ti-sysc data for omap4 ARM: dts: Add common mcpdm dts file for omap4 bus: ti-sysc: Add generic enable/disable functions ARM: OMAP2+: Drop mcspi platform data for omap4 ARM: OMAP2+: Drop uart platform data for dra7 ARM: OMAP2+: Drop gpio platform data for dra7 ARM: OMAP2+: Drop i2c platform data for dra7 ARM: OMAP2+: Drop mmc platform data for dra7 ARM: OMAP2+: Drop uart platform data for omap5 ARM: OMAP2+: Drop gpio platform data for omap5 ARM: OMAP2+: Drop i2c platform data for omap5 ARM: OMAP2+: Drop mmc platform data for omap5 ARM: OMAP2+: Drop uart platform data for am33xx and am43xx ARM: OMAP2+: Drop gpio platform data for am33xx and am43xx ARM: OMAP2+: Drop i2c platform data for am33xx and am43xx ARM: OMAP2+: Drop mmc platform data for am330x and am43xx ARM: OMAP2+: Drop uart platform data for omap4 ARM: OMAP2+: Drop gpio platform data for omap4 ARM: OMAP2+: Drop i2c platform data for omap4 ... Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
6d918e0933 |
Devicetree changes for omap variants
This series of changes configures dra7 pcie x2 lane mode, configures am43xx-epos-evm regulators and keypad wakeup source, and uses standard reset-gpios instead of gpio-reset for n810. We also need to split dra7 dtsi files for properly supporting dra76x and am576 as some of the devices are different such as usb and pruss. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAly0pfQRHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXNM3BAAvrQsjq1NTq6k7L5yZuInYtP+L7isRTz3 M7AWpMOjXex+a3GoZ8a8qrRVc6IqohAid75y8Y1qDvFVi9QEMrCsYlRwlYl048UM o5Ry4CePIY9XvUurRIemisT5/RQ4jzz9BBPogIJeQHl9r4qKbZEzTllmHnE7D78i Eh52IHQKScyO5MmUxZErH2f2StPHINjvO5WeuUUGcDcg7pcRlnbgLDtx26deewbl qMCh/3u71vd0g1JyEScOSq/QkeASpDx0sJifCLeWOmRZyarQGg5SduxVnQ6OJo8U xqiQ5dNYEn4BASOZ6BFGmSyqjvQWgmA0RnxkGB9nYPk9s9Lafq+gWgFNrI99Eavm BERMXlsrOJ/y5STjx+wmZ/IEeUceNqHK44xr8hcYweiu1Duv8+lfRRLLOdj2besh SPYsomoqY1yQKvr3k7YcuCddsFQZ9RtcaLVjlJmNlDE078jI1f/v9ZLXY8K8ZF3G gm07S/HtuX7xWM/fRveXrP2YQ+OREoyo5cTeDAyZmk/bY3sqVwgRuicgXAqu0Zdg AJQCnNda4UAIohtC98RHS1MB5BuwTyv431iAsxaAvK2cAR8NnV3qr5AmBbgP1iMP /oLeXA6OpfT+JHk/tGQ0TG9LrqNqW9DyZZOqfXCGYTiRJd06qUxvPIZOsUQFnJho jIsDaa4YQjc= =uc0c -----END PGP SIGNATURE----- Merge tag 'omap-for-v5.2/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omap variants This series of changes configures dra7 pcie x2 lane mode, configures am43xx-epos-evm regulators and keypad wakeup source, and uses standard reset-gpios instead of gpio-reset for n810. We also need to split dra7 dtsi files for properly supporting dra76x and am576 as some of the devices are different such as usb and pruss. * tag 'omap-for-v5.2/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra7: Separate AM57 dtsi files dt-binding: arm: omap: Add information for AM5748 ARM: dts: omap2420-n810: Use new CODEC reset pin name ARM: dts: am43xx-epos-evm: Add matrix keypad as wakeup source ARM: dts: am43xx-epos-evm: Keep DCDC3 regulator on in suspend to memory ARM: dts: am43xx-epos-evm: Keep DCDC5 and DCDC6 always on ARM: dts: dra7: Add properties to enable PCIe x2 lane mode Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
1c3a454083 |
ARM64: DT: Hisilicon SoCs DT updates for 5.2
* Hi3660 SoC and related boards:
- Added DMA support for the uart nodes
- Added the asp DMA controller node
- Replaced dma-min-chan with dma-channel-mask to follow the binding
* Hi3670 SoC and related boards:
- Reused Hi3660 reset to support Hi3670, updated the binding
document and added dts node
- Reused Hi3660 MMC controller to support Hi3670, updated the
binding document and added related nodes to support SD and WiFi
for the SoC and hikey970 board
- Added UFS controller node
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9+Sr
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-5.2' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: Hisilicon SoCs DT updates for 5.2
* Hi3660 SoC and related boards:
- Added DMA support for the uart nodes
- Added the asp DMA controller node
- Replaced dma-min-chan with dma-channel-mask to follow the binding
* Hi3670 SoC and related boards:
- Reused Hi3660 reset to support Hi3670, updated the binding
document and added dts node
- Reused Hi3660 MMC controller to support Hi3670, updated the
binding document and added related nodes to support SD and WiFi
for the SoC and hikey970 board
- Added UFS controller node
* tag 'hisi-arm64-dt-for-5.2' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: hi3670: Add UFS controller support
arm64: dts: hi3660: Fixup unofficial dma-min-chan to dma-channel-mask
arm64: dts: hi3660: Add hisi asp dma device
arm64: dts: hi3660: Add dma to uart nodes
arm64: dts: hisilicon: hikey970: Add SD and WiFi support
arm64: dts: hisilicon: hi3670: Add MMC controller support
dt-bindings: mmc: Add HI3670 MMC controller binding
arm64: dts: hisilicon: hi3670: Add reset controller support
dt-bindings: reset: Add HI3670 reset controller binding
Signed-off-by: Olof Johansson <olof@lixom.net>
|
||
|
Olof Johansson
|
236a4234ce |
arm64: dts: zynqmp: DT changes for v5.2
- Align xlnx-zynqmp-clk.h file name and separate binding for clock driver - Add TI quirks to zynqmp boards -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEABECAAYFAly0Q7IACgkQykllyylKDCHtLACfZGBpUNq5coHf3tQohyNyROnh q9cAn11bsVu3/BDOYhAO9TzKuYtzCACh =n0Wu -----END PGP SIGNATURE----- Merge tag 'zynqmp-dt-for-v5.2' of https://github.com/Xilinx/linux-xlnx into arm/dt arm64: dts: zynqmp: DT changes for v5.2 - Align xlnx-zynqmp-clk.h file name and separate binding for clock driver - Add TI quirks to zynqmp boards * tag 'zynqmp-dt-for-v5.2' of https://github.com/Xilinx/linux-xlnx: arm64: zynqmp: dt: Add TI PHY quirk dt-bindings: xilinx: Separate clock binding from firmware doc include: dt-binding: clock: Rename zynqmp header file Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
629d716187 |
Samsung DTS ARM64 changes for v5.2
1. Use proper clock rates for GSCALER module on TM2 boards.
2. Add clocks for local paths on DECON and GSCALER modules of
Exynos5433.
3. Add Slim SecuritySubSystem to Exynos5433.
-----BEGIN PGP SIGNATURE-----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=hXn6
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.2
1. Use proper clock rates for GSCALER module on TM2 boards.
2. Add clocks for local paths on DECON and GSCALER modules of
Exynos5433.
3. Add Slim SecuritySubSystem to Exynos5433.
* tag 'samsung-dt64-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Add SlimSSS to Exynos5433
arm64: dts: exynos: add DSD/GSD clocks to DECONs and GSCALERs of Exynos5433
arm64: dts: exynos: configure GSCALER related clocks on TM2
Signed-off-by: Olof Johansson <olof@lixom.net>
|
||
|
Olof Johansson
|
1fbdc24775 |
Samsung DTS ARM changes for v5.2
1. Use proper ADC on Exynos4412.
2. Extend the Exynos5420 Arndale Octa board with: CPU cooling maps,
unused regulators, ADC and UHS-I SD card support. Beside that adjust
regulators to proper level and add always-on when needed.
3. Extend the Exynos5260: high speed I2C and proper external interrupts.
Also fix shared external interrupt line and use better PLL for MMC
clocks.
4. Fix audio recording (broken around v5.1) and microphone recording
(since v4.14) on Exynos5422 Odroid XU3 boards.
5. Minor cleanups (stdout-path and bootargs).
-----BEGIN PGP SIGNATURE-----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=xLxq
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.2
1. Use proper ADC on Exynos4412.
2. Extend the Exynos5420 Arndale Octa board with: CPU cooling maps,
unused regulators, ADC and UHS-I SD card support. Beside that adjust
regulators to proper level and add always-on when needed.
3. Extend the Exynos5260: high speed I2C and proper external interrupts.
Also fix shared external interrupt line and use better PLL for MMC
clocks.
4. Fix audio recording (broken around v5.1) and microphone recording
(since v4.14) on Exynos5422 Odroid XU3 boards.
5. Minor cleanups (stdout-path and bootargs).
* tag 'samsung-dt-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Remove console argument from bootargs
ARM: dts: exynos: Use stdout-path property instead of console in bootargs
ARM: dts: exynos: Fix spelling mistake of EXYNOS5420
ARM: dts: exynos: Fix audio (microphone) routing on Odroid XU3
ARM: dts: exynos: Always enable necessary APIO_1V8 and ABB_1V8 regulators on Arndale Octa
ARM: dts: exynos: Extend the eMMC node on Arndale Octa
ARM: dts: exynos: Add support for UHS-I SD cards on Arndale Octa
ARM: dts: exynos: Adjust ldo23 and ldo27 to lower levels on Arndale Octa
ARM: dts: exynos: Fix audio routing on Odroid XU3
ARM: dts: exynos: Enable ADC on Arndale Octa
ARM: dts: exynos: Fix interrupt for shared EINTs on Exynos5260
ARM: dts: exynos: Add interrupts for dedicated EINTs on Exynos5260
ARM: dts: exynos: Add high speed I2C ports for Exynos5260
ARM: dts: exynos: Use bustop PLL as the source for MMC clocks on Exynos5260
ARM: dts: exynos: Order nodes alphabetically in Arndale Octa
ARM: dts: exynos: Add CPU cooling on Arndale Octa
ARM: dts: exynos: Add unused PMIC regulators on Arndale Octa board
ARM: dts: exynos: Use stdout path property on Arndale Octa board
ARM: dts: exynos: Document regulator used by ADC on Odroid U3
ARM: dts: exynos: Use ADC for Exynos4x12 on Exynos4412
Signed-off-by: Olof Johansson <olof@lixom.net>
|
||
|
Olof Johansson
|
2140eaf2f4 |
STM32 DT updates for v5.2, round 1
Highlights: ---------- MPU part: -Add initial support of stm32mp157a-dk1 board: This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Several connections are available on this boards: 4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ... -Add initial support of stm32mp157c-dk2 board: This board is a "super-set" of stm32mp157a-dk1. It embeds a STM32MP157c SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Same connections than stm32mp157a-dk1 board are available. Display panel (otm8009a) and Murata wifi/BT combo is added. -Add and enable SD card support (MMCI variant) on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. -Add and enable PMIC support (STPMIC1 chip) on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. -Add and enable IPCC mailbox support on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. -Add sysconfig clock support on stm32mp157c. -Add romem and temperature calibration support on stm32mp157c. -Add SPDIFRX support on stm32mp157c. -Enable CEC on stm32mp157a-dk1/dk2. MCU part: -Add and enable SD card support (MMCI variant) on stm32h743 eval and disco boards. -Add romem and temperature calibration support on stm32f429 (and so stm32f469). -Enable stm32f769 clock driver -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJcrzgEAAoJEH+ayWryHnCFhDMP/iRTr5Wcsj21zwv7vi4ntuCR jkJ3820EGx2kVdxeNuCfMGwZKnCVefqca3AsjAgoD9FskUzdi82JQ2Tdl8B4MxFQ lDuySiQs+7kkJuXccnOppz+ZcQRj3Ff0I5GlS3tvlAn1Ld6JqhBVEQ6DY6R8XBFx ICkpoPKCpjkeZliOejNU7syY0vFrUoSjMz9tMncFJ8DkuioYISHNlj4f5P+MpWRZ g8dbavXfQi/41yRH9KIvQiEy5ko5uDJxCac+JL7bkF522UJG93rEGn4K66JjYRX/ /vZ5ktE8oA6GUidPSbz/ETqlAwUQgzMFtI4mZo/lYjnf4bJ0VDJA0PEZmQn4RSb1 0JOiKROK6x/OPlDZ5qgrmtyW9HGEwWBl3UnmE8nrOA6tlqVICs7eK6meZuON/bBI 0xZiw6LQ5/ceiV2Lgpl8+n8tW8Plz9eRwDHvYKiBIxIqkY0j4U2tB6uggIfBjO1a zLVE82ukIWN2brv5kZmf0cR0eLRrITetCMsQJnCUOhZpqbOcRq5WaUtrWqAiPI17 PBNv4UxyRwC4QjcslLBNPdYuoSyrFBw6ByOovsSde7TK3J0tuNAHa4JJULyjFTw+ YOTJz5a+One/weflamNb+FSzSW+lzcMiXjsMMU3z70CfdOqAxXE8l1/4Peg0hD/f OKyq8WL/agAlfr1zgaj2 =k9wQ -----END PGP SIGNATURE----- Merge tag 'stm32-dt-for-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.2, round 1 Highlights: ---------- MPU part: - Add initial support of stm32mp157a-dk1 board: This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Several connections are available on this boards: 4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ... - Add initial support of stm32mp157c-dk2 board: This board is a "super-set" of stm32mp157a-dk1. It embeds a STM32MP157c SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Same connections than stm32mp157a-dk1 board are available. Display panel (otm8009a) and Murata wifi/BT combo is added. - Add and enable SD card support (MMCI variant) on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. - Add and enable PMIC support (STPMIC1 chip) on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. - Add and enable IPCC mailbox support on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. - Add sysconfig clock support on stm32mp157c. - Add romem and temperature calibration support on stm32mp157c. - Add SPDIFRX support on stm32mp157c. - Enable CEC on stm32mp157a-dk1/dk2. MCU part: - Add and enable SD card support (MMCI variant) on stm32h743 eval and disco boards. - Add romem and temperature calibration support on stm32f429 (and so stm32f469). - Enable stm32f769 clock driver * tag 'stm32-dt-for-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (24 commits) ARM: dts: stm32: enable cec on stm32mp157a-dk1 board ARM: dts: stm32: add cec pins muxing on stm32mp157 ARM: dts: stm32: add ltdc pins muxing on stm32mp157 ARM: dts: stm32: add I2C sleep pins muxing on stm32mp157 ARM: dts: stm32: add power supply of otm8009a on stm32mp157c-dk2 ARM: dts: stm32: Enable STM32F769 clock driver ARM: dts: stm32: add stpmic1 support on stm32mp157a dk1 board ARM: dts: stm32: add stpmic1 support on stm32mp157c ed1 board ARM: dts: stm32: add spdfirx pins to stm32mp157c ARM: dts: stm32: add spdifrx support on stm32mp157c ARM: dts: stm32: Add romem and temperature calibration on stm32f429 ARM: dts: stm32: Add romem and temperature calibration on stm32mp157c ARM: dts: stm32: Add clock on stm32mp157c syscfg ARM: dts: stm32: enable IPCC mailbox support on STM32MP157a-dk1 ARM: dts: stm32: enable IPCC mailbox support on STM32MP157c-ed1 ARM: dts: stm32: add IPCC mailbox support on STM32MP157c ARM: dts: stm32: add sdmmc1 support on stm32mp157a dk1 board ARM: dts: stm32: add sdmmc1 support on stm32mp157c ed1 board ARM: dts: stm32: add sdmmc1 support on stm32mp157c ARM: dts: stm32: add sdmmc1 support on stm32h743i disco board ... Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
bbf7499dc0 |
ASPEED device tree updates for 5.2
- RTC and GFX DRM driver went upstream this cycle - Miscellaneous board updates for Facebook and IBM BMCs -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+nHMAt9PCBDH63wBa3ZZB4FHcJ4FAlymzi4ACgkQa3ZZB4FH cJ5H0xAAux7RzhzYpVx6ErdbwNkwRqbK7i/X0t+BvfdJKH4yd9KyxRI873mTgFHm Um8M58Jc7VCAQ5xrat6uD9cCHQu7LQGH2sTeQhI+nEP1v8+/Hkz9Vk5imjn5fMSg 7LY3EITHkmdV3ggCz+7VMp9XWAkduQ2kX9uhamsWLAH6rR+QF17JBmjNIXmIBGke 0G4MHBDeVmXQ5DTmj0oIl2IJ60ZQhupf3LqPIrRymcvEaBEJICSrtmFtj6woHFJe q4WHLHp7NoXOF/zuI52NPads+zRcM4p9DeeGLuM6sKdFNcpluGL1oBsjsNGaaG+E wdgx0+NH/ZVrUoM6/f9klWmaK8v/eDB42DeX7D+uP20HufgY+W60DvKkzJgZVndT l6XVXI+l/Z3s6qHEAdDBgUpgu+0kyjT41NABt7Re5r2RpvR03K25MiHb6jqz62zG hPxpb2MBifPRnoo+xgFXNiPx2onxb9JkW9HEQo9JRhjdWVXgtf/ExeuYb4aJVgFJ hwZrKkTKw9ORF4B2YnObW6ZVshM8xcbcg+Tmvf+n9xCVucA9u721cCwWGlu87nJ0 9TysbMJDl9fI2YEk43kFaPJoJxzNq4Pm4huO/88xX0yS31gznENu2Vzp5hWFR4Or +sCpEW7aw6Zs47I0j2lbGlHp4s3wH+t65yNcLRexgWPGcal0Zro= =8l6l -----END PGP SIGNATURE----- Merge tag 'aspeed-5.2-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.2 - RTC and GFX DRM driver went upstream this cycle - Miscellaneous board updates for Facebook and IBM BMCs * tag 'aspeed-5.2-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: Add RTC node ARM: dts: aspeed: witherspoon: Update BMC partitioning ARM: dts: aspeed: cmm: enable iio-hwmon-adc ARM: dts: aspeed: tiogapass: Enable VUART ARM: dts: aspeed-g5: Add video engine ARM: dts: aspeed: Enable the GFX IP ARM: dts: aspeed-g5: Add resets and clocks to GFX node ARM: dts: aspeed: witherspoon: Enable vhub ARM: dts: aspeed: palmetto: Fix flash_memory region ARM: dts: aspeed: ast2500: Update flash layout Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
2fe743c27f |
Renesas ARM64 Based SoC DT Updates for v5.2
* R-Car Gen3 SoC based Salvator-X and Salvator-XS boards - Add GPIO keys support - Sort rwdt node alphabetically * R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs - Use extended audio DMAC register * R-Car M3-W (r8a7796) SoC - Remove unneeded sound #address/size-cells * R-Car M3-N (r8a77965) SoC - Add SSIU support for audio * R-Car E3 (r8a77990) and RZ/G2E (r8a774c0) SoCs - Remove invalid compatible value for CSI40 * R-Car E3 (r8a77990) SoC - Cprrect SPDX license identifier style * R-Car E3 (r8a77990) based Ebisu board - Add BD9571 PMIC with DDR0 backup power config - Correct adv7482 hexadecimal register address - Add GPIO expander * R-Car E3 (r8a77990) based Ebisu and D3 (r8a77995) based Draak boards - Update bootargs to bring them into line with other R-Car Gen3 boards - Enable LVDS1 encoder * R-Car D3 (r8a77995) based Draak board - Correct EthernetAVB phy mode - Enable CAN0 and CAN1 * RZ/G2E (r8a774c0) SoC - Add CANFD support - Correct CPU node style * RZ/G2E (r8a774c0) and RZ/G2M (r8a774a1) SoCs - Add clkp2 clock to CAN nodes * RZ/G2E (r8a774c0) based EK874 board - Add LED, CAN and RTC support -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlykdLsACgkQ189kaWo3 T74+7Q/9GzHHmezp1OYOjjUU2ykz8L2m8+qmIr2q8rkCJeSPr3OADjONltcEhZM0 3mlqYxYMaKyYODbgtEp9mzJOpVEe/5Kl/mPBCXt0b+eX8LrJcH58hChN4ERrrhZj MpDTxvhP3qAt7aScAiU11oWCKvHC4EJWmsfnRtj/AWb2ZuhgS0jw2ZZG0rwKMwi/ Ms9ZOkYoz5aV2zsE5AtuCr2qJXtQwjkLBuqtIy9jzjMrIpNv811FU8lsUitfgkrm jPKKKdHMPjzX8ii6Y3BgzM6uhh0lwoS5FCKZwCH6dHJQU11bRaFb2Cjvc0OzwgFE 3aKsaElD6upnF0xddbYzPKwv/TSKV8bqtpC6QUwTOOi9R2tt0rKYpzy+D7akrI97 o07WYaBL14Etfdl1F2QxPPasB38akKrAXLoo4nK1QyVhJsQC1dONVWdUPVOYvDAb mj+NS9sr6O1vcrXrG01Pru91eOE/tqrfMVQ557Yc+tTi0kbyxjIhIJS7sduqxy+t MV/RoMTUkT0MK99yF9aAwnlUNrcZ4AnW7Axdozlo2p0m9H+tTugxa+aX3KrIR3px pcThu9MzoagomM6h+aEKlLPst4HQIaG5hrecEah1hL9Zbc85FM0xG9muUsSgBxkG A72Bhd8h611KiIrFIQyGkhui+K26S0DJCGGqwc10trvtIKy6XkE= =XgtL -----END PGP SIGNATURE----- Merge tag 'renesas-arm64-dt-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Renesas ARM64 Based SoC DT Updates for v5.2 * R-Car Gen3 SoC based Salvator-X and Salvator-XS boards - Add GPIO keys support - Sort rwdt node alphabetically * R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs - Use extended audio DMAC register * R-Car M3-W (r8a7796) SoC - Remove unneeded sound #address/size-cells * R-Car M3-N (r8a77965) SoC - Add SSIU support for audio * R-Car E3 (r8a77990) and RZ/G2E (r8a774c0) SoCs - Remove invalid compatible value for CSI40 * R-Car E3 (r8a77990) SoC - Cprrect SPDX license identifier style * R-Car E3 (r8a77990) based Ebisu board - Add BD9571 PMIC with DDR0 backup power config - Correct adv7482 hexadecimal register address - Add GPIO expander * R-Car E3 (r8a77990) based Ebisu and D3 (r8a77995) based Draak boards - Update bootargs to bring them into line with other R-Car Gen3 boards - Enable LVDS1 encoder * R-Car D3 (r8a77995) based Draak board - Correct EthernetAVB phy mode - Enable CAN0 and CAN1 * RZ/G2E (r8a774c0) SoC - Add CANFD support - Correct CPU node style * RZ/G2E (r8a774c0) and RZ/G2M (r8a774a1) SoCs - Add clkp2 clock to CAN nodes * RZ/G2E (r8a774c0) based EK874 board - Add LED, CAN and RTC support * tag 'renesas-arm64-dt-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (26 commits) arm64: dts: renesas: salvator-common: Add GPIO keys support arm64: dts: renesas: use extended audio dmac register arm64: dts: renesas: r8a77995: draak: Fix EthernetAVB phy mode to rgmii arm64: dts: renesas: salvator-common: Sort node label arm64: dts: renesas: Update Ebisu and Draak bootargs arm64: dts: renesas: r8a774c0: Add clkp2 clock to CAN nodes arm64: dts: renesas: r8a774c0: Add CANFD support arm64: dts: renesas: r8a774a1: Add clkp2 clock to CAN nodes arm64: dts: renesas: ebisu: Add PMIC DDR0 Backup Power config arm64: dts: renesas: r8a77990-ebisu: Add BD9571 PMIC arm64: dts: renesas: r8a77990: Remove invalid compatible value for CSI40 arm64: dts: renesas: r8a774c0: Remove invalid compatible value for CSI40 arm64: dts: renesas: r8a77995: draak: Enable CAN0, CAN1 arm64: dts: renesas: r8a774c0-cat874: Add RWDT support arm64: dts: renesas: ebisu: Enable VIN5 arm64: dts: renesas: r8a774c0-cat874: Add LEDs support arm64: dts: renesas: r8a774c0-cat874: add RTC support arm64: dts: renesas: cat875: Add CAN support arm64: dts: renesas: r8a774c0: Fix cpu nodes style arm64: dts: renesas: r8a77965: add SSIU support for sound ... Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
1a88083b93 |
Core new soc features are hdmi-cec for rk3328, scheduler capacity-values
and emmc cleanups for rk3399. New boards are the OrangePi (rk3399) and NanoPi NEO4. Both the OrangePi as well as the NanoPC/Pie family also directly got some additional features added after the boards itself. The Rock960 family (rock960+ficus) got their power-tree cleaned to match the schematics and also got hdmi-audio and their gpu enabled. Mali support also got enabled on the RockPi4 and finally both rk3328-rock64 and rk3328-roc-cc got some additional features. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlyjIrAQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgTCuB/9wEiNDr5DvIYHdQM0/TrAWzMepdaO2YAHI 5v2NaZ3l0LDB1yXEJUJn/f7PRbGW9IETaldXLWKca8g8zJq6tM60p4gWx0XHw2hq szajRwBhbvo16u3vSNOJ1LlK8SdfI+ENx9129qWVtXToODK/0TIo+ubOpPT3uBxt P2Og+2F0zoj1WSWTXPEaGexF0YnwRp1v5NODF9XV6jpB9wAL+CYsllse7GFLxc52 sdp2Lfp/r/3VzHOCDOJ8e9YPXmLIYrjBQNw12/XkGdbnMKucCnI8GYxdkU7gSUh8 9ryBAAjOWREopY8GwdBfX+C+l1AKUFi8YFvC6PCxqFoseglzvAK0 =/JXo -----END PGP SIGNATURE----- Merge tag 'v5.2-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Core new soc features are hdmi-cec for rk3328, scheduler capacity-values and emmc cleanups for rk3399. New boards are the OrangePi (rk3399) and NanoPi NEO4. Both the OrangePi as well as the NanoPC/Pie family also directly got some additional features added after the boards itself. The Rock960 family (rock960+ficus) got their power-tree cleaned to match the schematics and also got hdmi-audio and their gpu enabled. Mali support also got enabled on the RockPi4 and finally both rk3328-rock64 and rk3328-roc-cc got some additional features. * tag 'v5.2-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (23 commits) arm64: dts: rockchip: Decrease emmc-phy's drive impedance on rk3399-puma arm64: dts: rockchip: Define drive-impedance-ohm for RK3399's emmc-phy. arm64: dts: rockchip: Disable DCMDs on RK3399's eMMC controller. arm64: dts: rockchip: Add nanopi4 ethernet phy arm64: dts: rockchip: Add PWM fan for NanoPC-T4 arm64: dts: rockchip: Add the fusb typec manager to rk3399-orangepi arm64: dts: rockchip: Specify vid supply for the rk3399-orangepi compass (AK09911) arm64: dts: rockchip: Fix clock names and add missing supplies for bluetooth on rk3399-orangepi arm64: dts: rockchip: Add 12V DCIN regulator to rk3399-ficus arm64: dts: rockchip: Rename vcc_sys into vcc5v0_sys on rk3399-rock960 arm64: dts: rockchip: Add Nanopi NEO4 initial support arm64: dts: rockchip: enable hdmi audio out for rk3399-rockpro64 arm64: dts: rockchip: Add support for the Orange Pi RK3399 board. arm64: dts: rockchip: enable mali on rock960 boards arm64: dts: rockchip: enable mali on Rock Pi 4 arm64: dts: rockchip: add rk3328-roc-cc cpu-supply entries for all cpu nodes arm64: dts: rockchip: give some life to the rk3328-roc-cc leds arm64: dts: rockchip: add #sound-dai-cells to HDMI of rk3328 arm64: dts: rockchip: add ir-receiver node on rk3328-rock64 arm64: dts: rockchip: add leds node on rk3328-rock64 ... Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
f6f9683c5a |
Quite a bit of love for the rk3288-veyron chromeos devices and a number
of cleanups for rk3288 from that area, hdmi support for the old rk3066 a small rv1108-eglin-r1 cleanup and wifi+hdmi-cec for the tinker board. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlyjIKkQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgagZB/0djmLiIppQmphU5xz0nu9la/6qPpX2Mglk 3XIi/pQXu+O/1i4aNJJwvk9k6cmX7nbVG2vQlLcsM/XNq0fy8Y4on9UThohkg23p Cf34w2pFn5Tp5bBTCWxa1LTi20UMVZsYZivy+/LdBlTIekEMNFHf6veIn8dBtnPW nFjDuvlhZqg6CaxVZ9Vn6xN1ClqleR0LuUcEt2X6wE8UocDs/01wZffcFbs3K0Uo mgz1vUd4DlhHJo2YlTa+T88OF13d7WXboNR67xJTlm69d0wfm+k3MFeZYAhiI4kx HdsqS+ZZxzsos7X3QCDiXMCbd070yGiDudD3UY4VCKymx9DzGWmp =YSCV -----END PGP SIGNATURE----- Merge tag 'v5.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Quite a bit of love for the rk3288-veyron chromeos devices and a number of cleanups for rk3288 from that area, hdmi support for the old rk3066 a small rv1108-eglin-r1 cleanup and wifi+hdmi-cec for the tinker board. * tag 'v5.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: enable vop0 and hdmi nodes to rk3066a-mk808 ARM: dts: rockchip: add rk3066 hdmi nodes ARM: dts: rockchip: Add device tree for rk3288-veyron-mighty dt-bindings: ARM: dts: rockchip: Add bindings for rk3288-veyron-mighty ARM: dts: rockchip: Add vdd_logic to rk3288-veyron ARM: dts: rockchip: Add dvs-gpios to rk3288-veyron-jerry ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15 dt-bindings: ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15 ARM: dts: rockchip: Fix gic/efuse sort ordering for rk3288 ARM: dts: rockchip: Enable WiFi on rk3288-tinker ARM: dts: rockchip: add grf reference in rk3288 tsadc node ARM: dts: rockchip: Enable HDMI CEC on rk3288-tinker-s ARM: dts: rockchip: remove disable-wp from rv1108-elgin-r1 emmc node Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
1c93235a6d |
ARM: dts: Amlogic updates for v5.2
- add GPIO line names for odroid-c1 boards - support internal clock measure driver -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAlyei6kACgkQWTcYmtP7 xmUPmQ/5AVzjBJYyAzR2nrw7j1paKMG1LdofxGUqzPEuteG0EOzbQePvVVUqQbaU LFU6SkZEhOnb1pUIQh5dQjbmsbZoh44aT+XJof/0kKUqrJzlVgsy3kRzt3SMzPsq c4qRxQ/o1Or6x79UTzCfiZ2CwFyK6UDXBwI5yh6HsnLS9JpKg2B+nBgWEUiY+f2S okQdmT3CUXU7q0fo772rktriwZ6Hk0ICQL4hc3l6jHqea1B7EWsj0BU2FrJlf4mQ e75HykJLkSSPLs9Duw+kHKOtAV6OfSMjfqMJTAiHRytVdLk8lCRlfTzfDx2Jy0AO Y3Skv4bKBOdxH9a1wmGKiXYsYe4DsOVskEqcPIRosEUYa4HGurWvCPGL/b0Gk447 d6Wzg1riBCAukkB2ac+04WhulVHmEAbytOapFj31Ut78mIbOjS+WpyI/2d+llhDa E6y/VuR0x/RpxS9IVd8WElfIxGZ5WYrc7RlA7XSv4PMnrAeQrzmlCfdj5DGHGE5u escQpQwvyu+56DCWmuQHYFYC1u3TFq1k96bnOompWHYRLQl/YmTzJybOMzaNAj2C Pjr4qlZ7XwixFriDZi16VxhKoJbOrgqnjFa/WQTlwsPLEKxelgKF9VWHv7Aov0YI jufkovEc7BCwCRqp1fjm/wfM+XsyHrYTgd1fibvjPeQeuIdnGOk= =7/hU -----END PGP SIGNATURE----- Merge tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: Amlogic updates for v5.2 - add GPIO line names for odroid-c1 boards - support internal clock measure driver * tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: odroidc1: add the GPIO line names ARM: dts: meson8b: add the internal clock measurer ARM: dts: meson8: add the internal clock measurer Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
0159225bc9 |
arm64: dts: Amlogic updates for v5.2
Highlights - new board: SEI Robotics 510, based on S905X2 SoC (G12A) - enable more periphearls for S905X2 based boards -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAlyejMcACgkQWTcYmtP7 xmV0LQ//TloHVjh3MDKwp6hwVygi9eSIB+n0UP1KyH44Al565+OgWY8PN2lPWJhE 4EpPDHgndJhWCABNVYXvuodStPPvH3qE4aibqdmtDaZP9jWVoAB53ZGyHvGkkAHp wzTlrX1WG2Rl6QI/ggrPU9bKYFponrBQYEyETNCFa3iGQPpmr2diwhZjz/DRbYYK BUUB1iFz5WCuLCviZMyeJipkjeio3Qpqegg2muEm1oUfdqM5loIJMxVND866gU7d /AiXy8Nky/EnapEUjau3pyuQQQOCNZXBsp8btRDaq9JURtft3uXAK3s6tHFQ0+qz mcjTrRdruOB9rgctlP8a5AqYnUx8IGorYlZxlorENZop6zrvOUDYSIKyZ7hapj3h 0rvCz2JB7Lr/nN78pfchNHBDP+MackvJNAZw+zDOEXtNgq81ix4Mf392VAsgHX+6 mC8CPzFeJuanhua+DXVBNtQ3ZNXOH3xozEQnGUwEJL/iZJ4T/vafAx0dl385wMGL m5oqVV4odRsNRcVRQlk7AO/atiBoOhBStPB7E3s90gWHEQXo1P2WKY2vEk05JGy8 tpQ3tOjraxmitzPpr7pSAvLnAxkN+KwHDy55oGOCLdr4G60fuEpZJ5dJzLTDmrKe aaN5Ki/foGufxVMqqpLYaxosmyvbUp3Sn4UHF2jcImL3pPRgTNU= =SkrM -----END PGP SIGNATURE----- Merge tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.2 Highlights - new board: SEI Robotics 510, based on S905X2 SoC (G12A) - enable more periphearls for S905X2 based boards * tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-g12a: Add CMA reserved memory arm64: dts: meson-g12a-x96-max: Enable BT Module arm64: dts: meson-g12a-x96-max: add regulators arm64: dts: meson-g12a-sei510: add regulators arm64: dts: meson-g12a-x96-max: add uart_AO pinctrl arm64: dts: meson-g12a-sei510: add uart_AO pinctrl arm64: dts: meson-g12a-u200: add uart_AO pinctrl arm64: dts: meson: g12a: Add UART A, B & C nodes and pins arm64: dts: meson: g12a: add reset controller arm64: dts: meson: g12a: add uart_ao_a pinctrl arm64: dts: meson: g12a: add pinctrl support controllers arm64: dts: meson: g12a: Add AO Clock + Reset Controller support arm64: dts: meson-gxm-nexbox-a1: Enable USB arm64: dts: meson: g12a: add efuse arm64: dts: meson: g12a: add secure monitor arm64: dts: meson-gxl-s905d-phicomm-n1: add status LED arm64: dts: meson-g12a: Add AO Secure node arm64: dts: Add SEI Robotics SEI510 Board vendor-prefixes: Add prefix for Shenzhen SEI Robotics Co., Ltd Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
d04e1ac428 |
ARM: defconfig: Amlogic updates for v5.2
- multi_v7_defconfig: enable the Amlogic Meson ADC and eFuse drivers -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAlyejQEACgkQWTcYmtP7 xmV8bRAAm/QypzFhigiaAaOt4AfQAqoVkxv3B3jJSwguaf0HaIZ+jOBlSrMqRmjR NiWEpsAWpUc6sRH97irVbcZPinPHaoWnRbUAgz0o6KPNUsy7WxZskg31n+4DQKCv 6sNp6Zw0xm+8+hPkgGNbMJn4Lbcmj/mjMubbJufwmNYlin+oG4ZtHiavSPliDjjB LDE4rgmpdwyQX+BtNhmEDmgNQ7UzLA9yVlQIL3mQ//6pAQthfEjLc2wUMNc/RuMq tr01G2dfjLNREVg58BhdSfQYNqnwGsmclt4xvqCKOe68AwtgldV7MWbw5HjisBW2 2Px0KTVA3M4qURBc9deNsp9J9o07gnWkpqriFlVbSr5pBivMJg86DatEfh5J0M/S DbJwYg0WYxTRAnUjoz64/r0LZn5DYWe8+yCpOAWBN7I/22yyjNYR3vY2x7WtBnWR w1sZsS0NRYNIMlhuNLZVhdzHEyHURiuimyZnFWn/JjlXJSv1E2KJYxdUEK4Bwczr FTeiIDLzs+j4/xoWEhWzLpra+6tHtiymRTC27+O1oO+DuaK5JOLkE1XCMF6cu/wZ bRJqWo89rXUEFkJvQjM5F6UD4y9R0gT2lHuTJWHdgfricXeRxQ6by27hvJNMH9X0 kRFBio7i/vTZsF0MDKAPBs6RN+Cjn1PDXeNVLbftTNJy66/N3E8= =x35z -----END PGP SIGNATURE----- Merge tag 'amlogic-defconfig' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/defconfig ARM: defconfig: Amlogic updates for v5.2 - multi_v7_defconfig: enable the Amlogic Meson ADC and eFuse drivers * tag 'amlogic-defconfig' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: multi_v7_defconfig: enable the Amlogic Meson ADC and eFuse drivers Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
424adc176a |
soc: Amlogic updates for v5.2
- socinfo: support new SoCs / packages -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAlyei14ACgkQWTcYmtP7 xmWvfg/+P+s9EJF9w9iSMWc6DCfwvufJRfPBO6T8MGoTSHzR8vPoCRDnwFtIhzh5 ZOMbGWeutXv7cQynbbqWsSTi+qY9ye7JjEW142Abxa2bMc51hxWsR9Y3Sxt/tUam KbikqYuyv7svSPoxpucLi30ykcti2BFdHMrfuNhM+Ml6IuFVvOJ1bJA5scQXVB7l 49blLz9VTtAkoPRD8XBd+otDntb/8XZxfUyD2FANZhauXNiriQxAzOaauru7iMz0 V1Nd5MzwW3q+SQ4Qn1iohCfAVmPdgqFmq1DItJXm0iaaYF/fxPRj7Sql5NVx+M2O iL6bozt/aAJRVcleGiS78jTawQh2FTE1h8NuVGDmGU2bg43E75DhbBeU1M95zZyM uMH96ofjejF2SKPFT5jl67qDCrOj0QwInM5Nivoa0lYDNhS+2ZXN/S7Bw8XF3KfO Igxub9/TKzSAVdB04V6CvT+v0YZW/f2exB0/KnIcmQC0tFiEf/CEfZb5QM4W5l5b BGGH+VyJaHNXobmzhaVOCapy2TlEIjOk5aVKu52B7Q7XsPuRs7guVWuIdqAt1tH8 lclXq3tju9shqfXJPtZiTvZzQbhElQZdNlcyDl1kSCMjCdqSR5lW8hfmEF//lU2F qPI5W3w73xkNCSFwCgbC1DYw8/N5aum8dIe28bz6ZKvsNyY+jV4= =rHNh -----END PGP SIGNATURE----- Merge tag 'amlogic-drivers' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers soc: Amlogic updates for v5.2 - socinfo: support new SoCs / packages * tag 'amlogic-drivers' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: meson-gx-socinfo: add missing of_node_put after of_device_is_available soc: amlogic: gx-socinfo: Add new SoC IDs and Packages IDs soc: amlogic: gx-socinfo: Add mask for each SoC packages Signed-off-by: Olof Johansson <olof@lixom.net> |
||
Linus Torvalds
|
9520b5324b |
A small number of ARM fixes
- Fix function tracer and unwinder dependencies so that we don't
end up building kernels that will crash.
- Fix ARMv7M nommu initialisation (missing register initialisation)
- Fix EFI decompressor entry (ensuring barrier instructions are
enabled prior to use.)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIVAwUAXMWwyfTnkBvkraxkAQJRZg/+Pf90mhZrEZk54EvxD/asPC/s2B173tjt
GqV+m7uHhfQRx1GL6zrirmOwx+fNLGc0ktlM7SGwEdljbkZ7juu/+Qbp6xe+uXPE
4PeI+NdxlQQrZ5Bye/qpINWueW+awDoJyiLuofYgfTYZZbUnHL2kmITAObRgLmmQ
MM1SrVXAleVw+IZWzPfsNiTJ5ouaSpdXMtUrfxPHU4PkxNAiTT3XJr4Uo9z2aS25
vgpdq566wq6XneOjrRU9yVvh2g+KFuxv2bJplimcxnMj8C5asC6XuDqIKXp4sLyi
OYZn5CeWIGuSdWTCaztD6cu8G0gsYL9Nf7SLYCw1YdR7SMawexu9aPE7UmLu/c1i
+a2Sd1s5eUZpUqelmdxOEIiiFssbKB0c57ntwhAPQ6vj/Gnd5kIvMMJ/sx36Je4G
7tVRDSPiNm/uU8wTy1MKGe2IOnwBUoRsryHc82Z8qaYGK8FJp3Fg3BVtJRMvZUIr
toLAm+7l0D085W0DrPCDqYTkVYocBZ7366XQGRegoZ4z5a+oPfP0OBLzotiY3LpV
KsEkBZUvhzI0IseV5U/s6htMqkgRktCSu80aYSJdHO+HQ67essOddTTV/7mxigEN
Q/f8sgMMf7/we2bgDA0qZUGl1Q6/CT8HhHO3X2pwscvA+5SWHnDwbiHOpwhHbq9l
gtR0D2vtdsY=
=DnoV
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"A small number of ARM fixes
- Fix function tracer and unwinder dependencies so that we don't end
up building kernels that will crash
- Fix ARMv7M nommu initialisation (missing register initialisation)
- Fix EFI decompressor entry (ensuring barrier instructions are
enabled prior to use)"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8857/1: efi: enable CP15 DMB instructions before cleaning the cache
ARM: 8856/1: NOMMU: Fix CCR register faulty initialization when MPU is disabled
ARM: fix function graph tracer and unwinder dependencies
|
||
Masahiro Yamada
|
28ba53c076 |
unicode: refactor the rule for regenerating utf8data.h
scripts/mkutf8data is used only when regenerating utf8data.h, which never happens in the normal kernel build. However, it is irrespectively built if CONFIG_UNICODE is enabled. Moreover, there is no good reason for it to reside in the scripts/ directory since it is only used in fs/unicode/. Hence, move it from scripts/ to fs/unicode/. In some cases, we bypass build artifacts in the normal build. The conventional way to do so is to surround the code with ifdef REGENERATE_*. For example, - |
||
|
Linus Torvalds
|
0d82044e1b |
powerpc fixes for 5.1 #6
A one-liner to make our Radix MMU support depend on HUGETLB_PAGE. We use some of the hugetlb inlines (eg. pud_huge()) when operating on the linear mapping and if they're compiled into empty wrappers we can corrupt memory. Then two fixes to our VFIO IOMMU code. The first is not a regression but fixes the locking to avoid a user-triggerable deadlock. The second does fix a regression since rc1, and depends on the first fix. It makes it possible to run guests with large amounts of memory again (~256GB). Thanks to: Alexey Kardashevskiy. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJcxUumAAoJEFHr6jzI4aWAEXwP/0x1hscWlJdpblLKc0Mh7kud MYUiEjxTsw2r8QeEJ5e3AtDh44DyuhrnL09w01vpsKMzVVC5vZDOQVXuAexeI8vO iv3pfpUhNyvNjpVDH1rHGJuQ4hJHIKr34GoNAhAfgW7yiZEvFOir2qd+bQm7KKgQ H2xvRiEXUJ3p1nVzOt2XYXEInTB2VWkwEfeNXLmh0AIySlAK1OLlrvZaZ4LzI7Bn Binbn+mIeftFWbXMOG8jhbiaTf6v9KQeWj5fTmaGEfBP3FBHjMQNf7krgCkq5Juh Ijxc20ardxBXeOq8E23q8+oAuGfpZjsKO3PPtl0r/Eyub65+FMP98//7iXvmwChL bkRwC+05LLMZPHYJ9UcWBKreEy1BDzb7nPWzvGkSyXnOVylavw+xZk22imAj/5pk auuuizTpTrW8c9WDYoWDkBVfbOOo44o4Eor51pYbC8Tq6cOkIYA6uO80JAD9yz6L FuKwrapMYKo779LAiX6u46iB6AVAaq/2TktwwnyZSqmj/oIiwNMKhrlENiO+CwgH PvDkrs0HA02F9nyHUreIQr5DQDgrgw4ZnMsatxvzBu/zBoe2RITfRms4c8WmKb+w y63ezFx4+FiFQGkniEY5/+o7ewpUFw6JyjKI+Q02tFKUKnq+iZQHtMxgJgxswxN/ k8EUzlyS2ZY8d7vHHQ4u =oJ9o -----END PGP SIGNATURE----- Merge tag 'powerpc-5.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "A one-liner to make our Radix MMU support depend on HUGETLB_PAGE. We use some of the hugetlb inlines (eg. pud_huge()) when operating on the linear mapping and if they're compiled into empty wrappers we can corrupt memory. Then two fixes to our VFIO IOMMU code. The first is not a regression but fixes the locking to avoid a user-triggerable deadlock. The second does fix a regression since rc1, and depends on the first fix. It makes it possible to run guests with large amounts of memory again (~256GB). Thanks to Alexey Kardashevskiy" * tag 'powerpc-5.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm_iommu: Allow pinning large regions powerpc/mm_iommu: Fix potential deadlock powerpc/mm/radix: Make Radix require HUGETLB_PAGE |
||
Andy Shevchenko
|
5f61d9517f |
pinctrl: intel: Increase readability of intel_gpio_update_pad_mode()
We better to use usual pattern for read-modify-update, than doing some operations in definition block. No functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
||
Chris Chiu
|
a0a5f7661e |
pinctrl: intel: Retain HOSTSW_OWN for requested gpio pin
The touchpad of the ASUS laptops E403NA, X540NA, X541NA are not responsive after suspend/resume. The following error message shows after resume. i2c_hid i2c-ELAN1200:00: failed to reset device. On these laptops, the touchpad interrupt is connected via a GPIO pin which is controlled by Intel pinctrl. After system resumes, the GPIO is in ACPI mode and no longer works as an IRQ. This commit saves the HOSTSW_OWN value during suspend, make sure the HOSTSW_OWN mode remains the same after resume. Signed-off-by: Chris Chiu <chiu@endlessm.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
||
|
Linus Torvalds
|
975a0f400f |
for-linus-20190428
-----BEGIN PGP SIGNATURE-----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=p7B3
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190428' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A set of io_uring fixes that should go into this release. In
particular, this contains:
- The mutex lock vs ctx ref count fix (me)
- Removal of a dead variable (me)
- Two race fixes (Stefan)
- Ring head/tail condition fix for poll full SQ detection (Stefan)"
* tag 'for-linus-20190428' of git://git.kernel.dk/linux-block:
io_uring: remove 'state' argument from io_{read,write} path
io_uring: fix poll full SQ detection
io_uring: fix race condition when sq threads goes sleeping
io_uring: fix race condition reading SQ entries
io_uring: fail io_uring_register(2) on a dying io_uring instance
|
||
|
Linus Torvalds
|
14f974d7f0 |
5.1 Third RC pull request
One core bug fix and a few driver ones
- FRWR memory registration for hfi1/qib didn't work with with some iovas
causing a NFSoRDMA failure regression due to a fix in the NFS side
- A command flow error in mlx5 allowed user space to send a corrupt
command (and also smash the kernel stack we've since learned)
- Fix a regression and some bugs with device hot unplug that was
discovered while reviewing Andrea's patches
- hns has a failure if the user asks for certain QP configurations
-----BEGIN PGP SIGNATURE-----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=K4Hb
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"One core bug fix and a few driver ones
- FRWR memory registration for hfi1/qib didn't work with with some
iovas causing a NFSoRDMA failure regression due to a fix in the NFS
side
- A command flow error in mlx5 allowed user space to send a corrupt
command (and also smash the kernel stack we've since learned)
- Fix a regression and some bugs with device hot unplug that was
discovered while reviewing Andrea's patches
- hns has a failure if the user asks for certain QP configurations"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hns: Bugfix for mapping user db
RDMA/ucontext: Fix regression with disassociate
RDMA/mlx5: Use rdma_user_map_io for mapping BAR pages
RDMA/mlx5: Do not allow the user to write to the clock page
IB/mlx5: Fix scatter to CQE in DCT QP creation
IB/rdmavt: Fix frwr memory registration
|
||
|
Linus Torvalds
|
72a6e35db3 |
dmaengine-fix-5.1-rc7
dmaengine fixes for v5.1-rc7
- fix for wrong register use in mediatek driver
- fix in sh driver for glitch is tx_status and treating 0 a valid
reside for cyclic
- fix in bcm driver for using right memory allocation flag
-----BEGIN PGP SIGNATURE-----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=qu54
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-5.1-rc7' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
- fix for wrong register use in mediatek driver
- fix in sh driver for glitch is tx_status and treating 0 a valid
residue for cyclic
- fix in bcm driver for using right memory allocation flag
* tag 'dmaengine-fix-5.1-rc7' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: mediatek-cqdma: fix wrong register usage in mtk_cqdma_start
dmaengine: sh: rcar-dmac: Fix glitch in dmaengine_tx_status
dmaengine: sh: rcar-dmac: With cyclic DMA residue 0 is valid
dmaengine: bcm2835: Avoid GFP_KERNEL in device_prep_slave_sg
|
||
Greg Kroah-Hartman
|
e5c812e84f |
ALSA: line6: use dynamic buffers
The line6 driver uses a lot of USB buffers off of the stack, which is not allowed on many systems, causing the driver to crash on some of them. Fix this up by dynamically allocating the buffers with kmalloc() which allows for proper DMA-able memory. Reported-by: Christo Gouws <gouws.christo@gmail.com> Reported-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Christo Gouws <gouws.christo@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
Tomer Tayar
|
03d5f641dc |
habanalabs: Use single pool for CPU accessible host memory
The device's CPU accessible memory on host is managed in a dedicated pool, except for 2 regions - Primary Queue (PQ) and Event Queue (EQ) - which are allocated from generic DMA pools. Due to address length limitations of the CPU, the addresses of all these memory regions must have the same MSBs starting at bit 40. This patch modifies the allocation of the PQ and EQ to be also from the dedicated pool, to ensure compliance with the limitation. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> |
||
Tobin C. Harding
|
1fd7c3b438 |
kobject: Improve doc clarity kobject_init_and_add()
Function kobject_init_and_add() is currently misused in a number of places in the kernel. On error return kobject_put() must be called but is at times not. Make the function documentation more explicit about calling kobject_put() in the error path. Signed-off-by: Tobin C. Harding <tobin@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Tobin C. Harding
|
92067f8438 |
kobject: Improve docs for kobject_add/del
There is currently some confusion on how to wind back kobject_init_and_add() during the error paths in code that uses this function. Add documentation to kobject_add() and kobject_del() to help clarify the usage. Signed-off-by: Tobin C. Harding <tobin@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Christoph Hellwig
|
73ce6abae5 |
iomap: convert to SPDX identifier
Use SPDX-License-Identifier instead of GPLv2 boilerplate. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> |
||
David S. Miller
|
5f0d736e7f |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-04-28 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Introduce BPF socket local storage map so that BPF programs can store private data they associate with a socket (instead of e.g. separate hash table), from Martin. 2) Add support for bpftool to dump BTF types. This is done through a new `bpftool btf dump` sub-command, from Andrii. 3) Enable BPF-based flow dissector for skb-less eth_get_headlen() calls which was currently not supported since skb was used to lookup netns, from Stanislav. 4) Add an opt-in interface for tracepoints to expose a writable context for attached BPF programs, used here for NBD sockets, from Matt. 5) BPF xadd related arm64 JIT fixes and scalability improvements, from Daniel. 6) Change the skb->protocol for bpf_skb_adjust_room() helper in order to support tunnels such as sit. Add selftests as well, from Willem. 7) Various smaller misc fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Kalle Valo
|
5c403533fb |
Fourth batch of patches intended for v5.1
* Fix an oops when we receive a packet with bogus lengths; * Fix a bug that prevented 5350 devices from working; * Fix a small merge damage from the previous series; -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEF3LNfgb2BPWm68smoUecoho8xfoFAlzFUJAACgkQoUecoho8 xfrECg//ejBGSZuq4XcyJB6H9In8Dz/VCgDrH6pOgQqREEvlmezhHRK5rtua/Kn7 FxVe99hzu2JJqKbvji5S2E5xsABqBjobcZYqhGuIPSzKV14DkA8F9swXDN4MOKnc uWCb/iBcNPYYwu7tN4vo1LyJUeofPG4Mdn1kQ+YNAanXQ7lIiKEqZ2mw6U3iAWMG Om8RSBBmcexT7nC25eVEbnrYQ6pNs9V5uXSyZ8JLZL6vGkhc3pGBfsPyAjQ0EuKs L4yWj3DgOunuA1Ruh/fPNu5n4Fk7EK62H7TDC0SPecYuwlgLyU6pcWPBdGlsYC2Z +kV6D2AquL7R9N16ZsYoimU5N3AQeCvI6QWFkasYR91Zos8dbarCAGa9jB6/hpWq MnrtAqy6Ea4WupmooFwpFZc+RAhr6BPiQS6dv1KkhDBA9W3Nrc6m0EUQU9gSkQaB aq9vOvpZjRja+NbUX3cWw1QDXuabEIgx3TBurmxA6Mb+j25aa00kzkvqD6PvNJnM JaPc8enNjDiIZVvsoemTxh6GKpz+WQXz7yBh0ndynByDv7XuXtRyhr0MC2+o+oL6 3oFYw0qjczl6DPtOrbEq7PQL+iq8muz14I3FrJfkEvYyCU6KHyvE+dJDxod7A7SQ ulpV8cL98Eq9XDMf/6bPowJGjgzAgQr7Odc8EZKmZKDjb2E7aC4= =7QM5 -----END PGP SIGNATURE----- Merge tag 'iwlwifi-for-kalle-2019-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes Fourth batch of patches intended for v5.1 * Fix an oops when we receive a packet with bogus lengths; * Fix a bug that prevented 5350 devices from working; * Fix a small merge damage from the previous series; |
||
Oded Gabbay
|
a38693d775 |
habanalabs: return old dram bar address upon change
This patch changes the ASIC interface function that changes the DRAM bar window. The change is to return the old address that the DRAM bar pointed to instead of an error code. This simplifies the code that use this function (mainly in debugfs) to restore the bar to the old setting. This is also needed for easier support in future ASICs. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> |
||
Wenwen Wang
|
cb5173594d |
ALSA: usb-audio: Fix a memory leak bug
In parse_audio_selector_unit(), the string array 'namelist' is allocated through kmalloc_array(), and each string pointer in this array, i.e., 'namelist[]', is allocated through kmalloc() in the following for loop. Then, a control instance 'kctl' is created by invoking snd_ctl_new1(). If an error occurs during the creation process, the string array 'namelist', including all string pointers in the array 'namelist[]', should be freed, before the error code ENOMEM is returned. However, the current code does not free 'namelist[]', resulting in memory leaks. To fix the above issue, free all string pointers 'namelist[]' in a loop. Signed-off-by: Wenwen Wang <wang6495@umn.edu> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
Luca Coelho
|
d156e67d3f |
iwlwifi: mvm: fix merge damage in iwl_mvm_vif_dbgfs_register()
When I rebased Greg's patch, I accidentally left the old if block that
was already there. Remove it.
Fixes:
|
||
Emmanuel Grumbach
|
5c9adef978 |
iwlwifi: fix driver operation for 5350
We introduced a bug that prevented this old device from working. The driver would simply not be able to complete the INIT flow while spewing this warning: CSR addresses aren't configured WARNING: CPU: 0 PID: 819 at drivers/net/wireless/intel/iwlwifi/pcie/drv.c:917 iwl_pci_probe+0x160/0x1e0 [iwlwifi] Cc: stable@vger.kernel.org # v4.18+ Fixes: |
||
|
Luca Coelho
|
de1887c064 |
iwlwifi: mvm: check for length correctness in iwl_mvm_create_skb()
We don't check for the validity of the lengths in the packet received from the firmware. If the MPDU length received in the rx descriptor is too short to contain the header length and the crypt length together, we may end up trying to copy a negative number of bytes (headlen - hdrlen < 0) which will underflow and cause us to try to copy a huge amount of data. This causes oopses such as this one: BUG: unable to handle kernel paging request at ffff896be2970000 PGD 5e201067 P4D 5e201067 PUD 5e205067 PMD 16110d063 PTE 8000000162970161 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 1824 Comm: irq/134-iwlwifi Not tainted 4.19.33-04308-geea41cf4930f #1 Hardware name: [...] RIP: 0010:memcpy_erms+0x6/0x10 Code: 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe RSP: 0018:ffffa4630196fc60 EFLAGS: 00010287 RAX: ffff896be2924618 RBX: ffff896bc8ecc600 RCX: 00000000fffb4610 RDX: 00000000fffffff8 RSI: ffff896a835e2a38 RDI: ffff896be2970000 RBP: ffffa4630196fd30 R08: ffff896bc8ecc600 R09: ffff896a83597000 R10: ffff896bd6998400 R11: 000000000200407f R12: ffff896a83597050 R13: 00000000fffffff8 R14: 0000000000000010 R15: ffff896a83597038 FS: 0000000000000000(0000) GS:ffff896be8280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff896be2970000 CR3: 000000005dc12002 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: iwl_mvm_rx_mpdu_mq+0xb51/0x121b [iwlmvm] iwl_pcie_rx_handle+0x58c/0xa89 [iwlwifi] iwl_pcie_irq_rx_msix_handler+0xd9/0x12a [iwlwifi] irq_thread_fn+0x24/0x49 irq_thread+0xb0/0x122 kthread+0x138/0x140 ret_from_fork+0x1f/0x40 Fix that by checking the lengths for correctness and trigger a warning to show that we have received wrong data. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> |
||
Colin Ian King
|
f341d89790 |
powerpc/mm: fix spelling mistake "Outisde" -> "Outside"
There are several identical spelling mistakes in warning messages, fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> |
||
Fuqian Huang
|
4ab1ae3453 |
ALSA: gus: fix misuse of %x
Pointers should be printed with %p or %px rather than cast to long type and printed with %lx. Drop the address printing. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
Kailang Yang
|
607ca3bd22 |
ALSA: hda/realtek - EAPD turn on later
Let EAPD turn on after set pin output. [ NOTE: This change is supposed to reduce the possible click noises at (runtime) PM resume. The functionality should be same (i.e. the verbs are executed correctly) no matter which order is, so this should be safe to apply for all codecs -- tiwai ] Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
|
Kailang Yang
|
0700d3d117 |
ALSA: hda/realtek - Fixed Dell AIO speaker noise
Fixed Dell AIO speaker noise.
spec->gen.auto_mute_via_amp = 1, this option was solved speaker white
noise at boot.
codec->power_save_node = 0, this option was solved speaker noise at
resume back.
Fixes:
|