use smu_update_table_with_arg to replace old code logic
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in fact, the firmware need 2 parameter: 1.table_id, 2.XferArg
so change the function interface to match the firmware code
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The introduction of multipage bio vectors broke pblk's partial read
logic due to it not being prepared for multipage bio vectors.
Use bio vector iterators instead of direct bio vector indexing.
Fixes: 07173c3ec2 ("block: enable multipage bvecs")
Reported-by: Klaus Jensen <klaus.jensen@cnexlabs.com>
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Updated description.
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a QP is put into error state, the send queue will be flushed.
This mechanism is implemented in both the first and the second leg
of the send engine. Since the second leg is only responsible for
data transactions in the KDETH space for the TID RDMA WRITE request,
it should not perform the flushing of the send queue.
This patch removes the flushing function of the second leg, but
still keeps the bailing out of the QP if it is put into error state.
Fixes: 70dcb2e3dc ("IB/hfi1: Add the TID second leg send packet builder")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that we have a single IB device with multiple ports we can remove the
VF representor profile.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move from IB device (representor) per virtual function to single IB device
with port per virtual function (port 1 represents the uplink). As number
of ports is a static property of an IB device, declare the IB device with
as many port as the possible according to the PCI bus.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We store the SMI information in the core device's struct, make sure we set
that information only once (and not per port), while here make the for
loop based on the actual size of the array.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The design of representors is such that once an IB representor is created,
the netdev of representor already exists, we can use that fact to simplify
the netdev affinity code.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently the steering for SQs created on representors is done on
creation, once we move to representors as ports of an IB device we need
the port argument which is given only at the modify QP stage, adjust the
code appropriately.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In preparation of moving into a model of single IB device multiple ports
move rep to be part of the port structure. We mark a representor device by
setting is_rep, no functional change with this patch.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
On allocation we use the array size and on destruction num_ports, use the
array size of destruction as well, in this context the array corresponds
to the native/actual ports on the NIC so no need to adjust this logic for
representors.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In downstream patches we will need access to the ports before doing any
stages, in order to set net device per representor.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Simplify the code and move the deallocation of the IB device into the
remove function.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Netdev info is stored in a separate array and holds data relevant on a per
port basis, move it to be part of the port struct.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
symlink body shouldn't be freed without an RCU delay. Switch apparmorfs
to ->destroy_inode() and use of call_rcu(); free both the inode and symlink
body in the callback.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
symlink body shouldn't be freed without an RCU delay. Switch securityfs
to ->destroy_inode() and use of call_rcu(); free both the inode and symlink
body in the callback.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
From
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Required for dependencies on the next series
* branch 'mlx5-next':
net/mlx5: E-Switch, add a new prio to be used by the RDMA side
net/mlx5: E-Switch, don't use hardcoded values for FDB prios
net/mlx5: Fix false compilation warning
net/mlx5: Expose MPEIN (Management PCIE INfo) register layout
net/mlx5: Add rate limit print macros
net/mlx5: Add explicit bar address field
net/mlx5: Replace dev_err/warn/info by mlx5_core_err/warn/info
net/mlx5: Use dev->priv.name instead of dev_name
net/mlx5: Make mlx5_core messages independent from mdev->pdev
net/mlx5: Break load_one into three stages
net/mlx5: Function setup/teardown procedures
net/mlx5: Move health and page alloc init to mdev_init
net/mlx5: Split mdev init and pci init
net/mlx5: Remove redundant init functions parameter
net/mlx5: Remove spinlock support from mlx5_write64
net/mlx5: Remove unused MLX5_*_DOORBELL_LOCK macros
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently we use force_dsc_enable to force DSC from IGT, but
we dont expose this value to userspace through debugfs.
This patch exposes this through the same dsc_fec_support
debugfs node per connector so that we can restore its value
back after the tests are completed.
Suggested-by: Imre Deak <imre.deak@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405224821.32435-1-manasi.d.navare@intel.com
Sparse complains yama_task_prctl can be static. Fix it by making
it static.
Signed-off-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
securityfs_create_file may fail. The fix checks its status and
returns the error code upstream if it fails.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: James Morris <james.morris@microsoft.com>
The current code can perform concurrent updates and reads on
user->session_keyring and user->uid_keyring. Add a comment to
struct user_struct to document the nontrivial locking semantics, and use
READ_ONCE() for unlocked readers and smp_store_release() for writers to
prevent memory ordering issues.
Fixes: 69664cf16a ("keys: don't generate user and user session keyrings unless they're accessed")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
sparse complains that a bunch of places in kernel/cred.c access
cred->session_keyring without the RCU helpers required by the __rcu
annotation.
cred->session_keyring is written in the following places:
- prepare_kernel_cred() [in a new cred struct]
- keyctl_session_to_parent() [in a new cred struct]
- prepare_creds [in a new cred struct, via memcpy]
- install_session_keyring_to_cred()
- from install_session_keyring() on new creds
- from join_session_keyring() on new creds [twice]
- from umh_keys_init()
- from call_usermodehelper_exec_async() on new creds
All of these writes are before the creds are committed; therefore,
cred->session_keyring doesn't need RCU protection.
Remove the __rcu annotation and fix up all existing users that use __rcu.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
sparse complains that Yama defines functions and a variable as non-static
even though they don't exist in any header. Fix it by making them static.
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
So far the kernel only prints the requested size if swiotlb buffer if full.
It is not possible to know whether it is simply an out of buffer, or it is
because swiotlb cannot allocate buffer with the requested size due to
fragmentation.
As 'io_tlb_used' is available since commit 71602fe6d4 ("swiotlb: add
debugfs to track swiotlb buffer usage"), both 'io_tlb_used' and
'io_tlb_nslabs' are printed when swiotlb buffer is full.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Several fixes, add more reviewers to the list
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcq7faAAoJECgfDbjSjVRpyNoH/0r2GnlrrWyC2+YxoyuPgDcS
ZrgyLmfvOEfe5X4/SmLNn+PC1scyA2ET1xsPPGZz7OBzyddqHtDhgTNsjdgoQJD8
BBDiN9JGMModckKNuAW+QVVAlfCC3yNmewcPFQSvzJvafnYaREpVKNbTU9nKhbUO
/dfU9mE5P6SkCwU4M49o4M2Lm9dM2+5d7x9HDRD1DRCmTFJ8ZDMoyMxC3HcekaZl
iXYAHLZ3hXUkROsoIrdxe4w41nPOTzsCi8fCUCm2Vu/HQm3W3bw6c8JAqdn7/pOD
PQbKlKXzxw95BXkeogyF1Z4Ua7JFkvVnhIdKdjExW9g2QId7T7KXciVo5e0BqAo=
=Hd5l
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Several fixes, add more reviewers to the list"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio: Honour 'may_reduce_num' in vring_create_virtqueue
MAiNTAINERS: add Paolo, Stefan for virtio blk/scsi
virtio_pci: fix a NULL pointer reference in vp_del_vqs
The Maximum Physical Memory 2GiB option for 64bit systems is currently
broken because kernel hangs at boot-time when this option is enabled
and the underlying system has more than 2GiB memory.
This issue can be easily reproduced on SiFive Unleashed board where
we have 8GiB of memory.
This patch fixes above issue by removing unusable memory region in
setup_bootmem().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Currently, compat tasks running on arm64 can allocate memory up to
TASK_SIZE_32 (UL(0x100000000)).
This means that mmap() allocations, if we treat them as returning an
array, are not compliant with the sections 6.5.8 of the C standard
(C99) which states that: "If the expression P points to an element of
an array object and the expression Q points to the last element of the
same array object, the pointer expression Q+1 compares greater than P".
Redefine TASK_SIZE_32 to address the issue.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
[will: fixed typo in comment]
Signed-off-by: Will Deacon <will.deacon@arm.com>
After changing the argument of __raw_xsave_addr() from a mask to
number Dave suggested to check if it makes sense to do the same for
get_xsave_addr(). As it turns out it does.
Only get_xsave_addr() needs the mask to check if the requested feature
is part of what is supported/saved and then uses the number again. The
shift operation is cheaper compared to fls64() (find last bit set).
Also, the feature number uses less opcode space compared to the mask. :)
Make the get_xsave_addr() argument a xfeature number instead of a mask
and fix up its callers.
Furthermore, use xfeature_nr and xfeature_mask consistently.
This results in the following changes to the kvm code:
feature -> xfeature_mask
index -> xfeature_nr
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: kvm ML <kvm@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Rik van Riel <riel@surriel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Siarhei Liakh <Siarhei.Liakh@concurrent-rt.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190403164156.19645-12-bigeasy@linutronix.de
Remove the "console=ttySAC..." argument from DTSes having a proper
stdout-path property. To make the code functionally equivalent, add the
serial port baud rate and parity.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Replacing bootargs with stdout-path property in chosen node allows using
early console by adding just 'earlycon' parameter to the kernel command
line.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
wcd9335.c: undefined reference to 'devm_regmap_add_irq_chip'
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 7769db5883 ("drm/i915/dp: optimize eDP 1.4+ link config fast
and narrow") started to optize the eDP 1.4+ link config, both per spec
and as preparation for display stream compression support.
Sadly, we again face panels that flat out fail with parameters they
claim to support. Revert, and go back to the drawing board.
v2: Actually revert to max params instead of just wide-and-slow.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109959
Fixes: 7769db5883 ("drm/i915/dp: optimize eDP 1.4+ link config fast and narrow")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: "Lee, Shawn C" <shawn.c.lee@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.0+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Tested-by: Albert Astals Cid <aacid@kde.org> # v5.0 backport
Tested-by: Emanuele Panigati <ilpanich@gmail.com> # v5.0 backport
Tested-by: Matteo Iervasi <matteoiervasi@gmail.com> # v5.0 backport
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405075220.9815-1-jani.nikula@intel.com
(cherry picked from commit f11cb1c19a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
IO enable sequencing needs ddi clocks enabled.
These clocks will be gated at a later point in
the enable sequence.
v2: Fix the commit header (Uma)
v3: Remove the redundant read (Ville)
Fixes: 949fc52af1 ("drm/i915/icl: add pll mapping for DSI")
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1553513202-13863-1-git-send-email-vandita.kulkarni@intel.com
(cherry picked from commit c5b81a3252)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Support for Exynos5420/5422/5800 SoCs requires MCPM to properly boot all
CPU cores on all currectly supported platforms: Peach Pit (Exynos5420),
Odroid XU3/XU3lite/XU4/HC1 (Exynos5422) and Peach Pi (Exynos5800).
Without it some CPU cores fail to come online. Remove then the ability to
disable MCPM and make it mandatory when Exynos542x/5800 support is
enabled.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
nvme_cancel_request() is used in error handler, and it is always
reliable to cancel request synchronously, and avoids possible race
in which request may be completed after real hw queue is destroyed.
One issue is reported by our customer on NVMe RDMA, in which freed ib
queue pair may be used in nvme_rdma_complete_rq().
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: James Smart <james.smart@broadcom.com>
Cc: linux-nvme@lists.infradead.org
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In NVMe's error handler, follows the typical steps of tearing down
hardware for recovering controller:
1) stop blk_mq hw queues
2) stop the real hw queues
3) cancel in-flight requests via
blk_mq_tagset_busy_iter(tags, cancel_request, ...)
cancel_request():
mark the request as abort
blk_mq_complete_request(req);
4) destroy real hw queues
However, there may be race between #3 and #4, because blk_mq_complete_request()
may run q->mq_ops->complete(rq) remotelly and asynchronously, and
->complete(rq) may be run after #4.
This patch introduces blk_mq_complete_request_sync() for fixing the
above race.
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: James Smart <james.smart@broadcom.com>
Cc: linux-nvme@lists.infradead.org
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
clang points out that the declaration of cio_irb does not match the
definition exactly, it is missing the alignment attribute:
../drivers/s390/cio/cio.c:50:1: warning: section does not match previous declaration [-Wsection]
DEFINE_PER_CPU_ALIGNED(struct irb, cio_irb);
^
../include/linux/percpu-defs.h:150:2: note: expanded from macro 'DEFINE_PER_CPU_ALIGNED'
DEFINE_PER_CPU_SECTION(type, name, PER_CPU_ALIGNED_SECTION) \
^
../include/linux/percpu-defs.h:93:9: note: expanded from macro 'DEFINE_PER_CPU_SECTION'
extern __PCPU_ATTRS(sec) __typeof__(type) name; \
^
../include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS'
__percpu __attribute__((section(PER_CPU_BASE_SECTION sec))) \
^
../drivers/s390/cio/cio.h:118:1: note: previous attribute is here
DECLARE_PER_CPU(struct irb, cio_irb);
^
../include/linux/percpu-defs.h:111:2: note: expanded from macro 'DECLARE_PER_CPU'
DECLARE_PER_CPU_SECTION(type, name, "")
^
../include/linux/percpu-defs.h:87:9: note: expanded from macro 'DECLARE_PER_CPU_SECTION'
extern __PCPU_ATTRS(sec) __typeof__(type) name
^
../include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS'
__percpu __attribute__((section(PER_CPU_BASE_SECTION sec))) \
^
Use DECLARE_PER_CPU_ALIGNED() here, to make the two match.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
If CONFIG_PGSTE is not set (e.g. when compiling without KVM), GCC complains:
CC arch/s390/mm/pgtable.o
arch/s390/mm/pgtable.c:413:15: warning: ‘pmd_alloc_map’ defined but not
used [-Wunused-function]
static pmd_t *pmd_alloc_map(struct mm_struct *mm, unsigned long addr)
^~~~~~~~~~~~~
Wrap the function with "#ifdef CONFIG_PGSTE" to silence the warning.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This cursor is used for debugging only. But since
commit "s390/qdio: pass up count of ready-to-process SBALs" it effectively
duplicates the first_to_check cursor, diverging for just a short moment
when get_*_buffer_frontier() updates q->first_to_check.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When passing a range of ready-to-process SBALs to the upper-layer
driver, use the available 'count' instead of calculating the distance
between the first_to_check and first_to_kick cursors.
This simplifies the logic of the queue-scan path, and opens up the
possibility of scanning all 128 SBALs in one go (as determining the
reported count no longer requires wrap-around safe arithmetic on the
queue's cursors).
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When qdio_{in,out}bound_q_moved() scans a queue for pending work, it
currently only returns a boolean to its caller. The interface to the
upper-layer-drivers (qdio_kick_handler() and qdio_get_next_buffers())
then re-calculates the number of pending SBALs from the
q->first_to_check and q->first_to_kick cursors.
Refactor this so that whenever get_{in,out}bound_buffer_frontier()
adjusted the queue's first_to_check cursor, it also returns the
corresponding count of ready-to-process SBALs (and 0 else).
A subsequent patch will then make use of this additional information.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The DSCI is a 1-byte field, placed at the start of an u32. So when
printing it to a queue's debug state, limit the output to the part
that's actually occupied by the DSCI.
When the DSCI is set this gives us the expected output of '1', rather
than the current (obscure) value of '16777216'.
Suggested-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Disallow kernel command line alteration via ipl parameter block if
running in protected virtualization environment.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The Ultravisor Call Facility (stfle bit 158) defines an API to the
Ultravisor (UV calls), a mini hypervisor located at machine
level. With help of the Ultravisor, KVM will be able to run
"protected" VMs, special VMs whose memory and management data are
unavailable to KVM.
The protected VMs can also request services from the Ultravisor.
The guest api consists of UV calls to share and unshare memory with the
kvm hypervisor.
To enable this feature support PROTECTED_VIRTUALIZATION_GUEST kconfig
option has been introduced.
Co-developed-by: Janosch Frank <frankja@de.ibm.com>
Signed-off-by: Janosch Frank <frankja@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Same as for .boot.data section make sure that .boot.preserved.data
sections of vmlinux and arch/s390/compressed/vmlinux match before
producing the compressed kernel image. Symbols presence, order and sizes
are cross-checked.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
