Clean up skl_allocate_pipe_ddb() a bit by moving the 'wm' variable
to tighter scope. We'll also consitify it where appropriate.
Also initialize plane_alloc/uv_plane_alloc when decrlaring them
rather than later.
v2: Update commit message (Matt)
Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-8-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Currently we disable all the watermarks above the selected max
level for every plane. That would mean that the cursor's watermarks
may also get modified when another plane causes the selected
max watermark level to change. That is not so great as we would
like to keep the cursor as indepenedent as possible to avoid
having to throttle it in resposne to other plane activity.
To avoid that let's keep the watermarks enabled even for levels
above the max selected watermark level, iff the plane has enough
ddb for that particular level. This way the cursor's enabled
watermarks only depend on the cursor itself. This is safe because
the hardware will never choose to use a watermark level unless
all enabled planes have also enabled that level.
Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-7-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
We use a fixed ddb allocation for the cursor. Now the calculation
actually makes sure we have enough ddb space, but let's double check
anyway.
Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-6-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Currently we just assume that 32 or 8 blocks of ddb is sufficient
for the cursor. The 32 might be, but the 8 is certainly not. The
minimum we need is at least what level 0 watermarks need, but that
is a bit restrictive, so instead let's calculate what level 7
would need for a 256x256 cursor. We'll use that to determine the
fixed ddb allocation for the cursor. This way the cursor will never
be responsible for missing out on deeper power saving states.
v2: Loop to make sure this works even if some wm levels are
totally disabled (latency==0)
Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190319160311.23529-1-ville.syrjala@linux.intel.com
Extract the meat of skl_compute_plane_wm_params() into a lower
level helper that doesn't depend on the plane state. We'll
reuse this for the cursor ddb allocation calculations.
Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-4-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
skl_compute_plane_wm() doesn't actually need the plane state. While
it would make logically sense to pass it, we shall need to reuse
skl_compute_plane_wm() to compute the minimum ddb allocation for
the cursor before the cursor may be enabled. Thus we can't rely
on the plane state. The alternative would be to duplicate a lot of
the wm calculations for the cursor ddb allocation case, which doens't
appeal to me.
Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-3-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
If the minimum required ddb space for all the planes equals the
total ddb space available we are allowed to use the relevant
watermark level.
Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-2-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
To allow unsetting .is_mobile for the desktop variant
of PNV fix up the cdclk code to select the mobile HPLLVCO register
for both PNV variants.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318165633.28924-5-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
We want to allow the desktop PNV to not have .is_mobile set. To
that end let's add a small helper to determine if the platform
has the ASLE interrupt (or equivalent). Supposdely both PNV
variants have it.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318165633.28924-4-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Add a small helper to determine if we have the panel power
sequencer or not. We'll make PNV an exceptional case so
that we can unset .is_mobile for the desktop variant.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318165633.28924-3-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Make the code self-documenting by introducing i9xx_has_pfit().
Also make PNV an exceptional case so that we can unset
.is_mobile for the desktop variant.
v2: s/gen4/gen>=4/ (Tvrtko)
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190319142329.22881-1-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
g33/i964g/g45 are the exceptional cases when it comes to
the swizzle detection. Let's reorder the code to handle
them first and let everything else be handled by the
else branch. This allows us to unset .is_mobile for the
desktop PNV variant (which supposedly must follow the
"mobile" path here).
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318165633.28924-1-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The imx6q Technical reference manual shows the interrupt is
available to wake from sleep using the power button. The driver
has been available for quite some time, and other variants of the
i.MX6 have it enabled, so this implements it much like the others.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Now that the backlight driver is upstream, we can properly manage the
backlight from the panel.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds the i2c device node for the ethernet switch watchdog.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In imx6_set_lpm, we only need to unmask GINT when not WAIT_CLOCKED,
so add a check condition.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Kohji Okuno <okuno.kohji@jp.panasonic.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On init or context switch, set TPC clock relaxation counter
register to a golden value.
Signed-off-by: Dalit Ben Zoor <dbenzoor@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
hidpp_scroll_counter_handle_scroll() doesn't expect a 0-value scroll event, it
gets interpreted as a negative scroll direction event. This can cause scroll
direction resets and thus broken scrolling.
Fixes: 4435ff2f09 ("HID: logitech: Enable high-resolution scrolling on Logitech mice")
Cc: stable@vger.kernel.org # v5.0
Reported-and-tested-by: Aimo Metsälä <aimetsal@outlook.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The clang option -Oz enables *aggressive* optimization for size,
which doesn't necessarily result in smaller images, but can have
negative impact on performance. Switch back to the less aggressive
-Os.
This reverts commit 6748cb3c29.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
MAX_PHYSMEM_BITS only needs to be defined if CONFIG_SPARSEMEM is
enabled, and that was the case before commit 4ffe713b75
("powerpc/mm: Increase the max addressable memory to 2PB").
On 32-bit systems, where CONFIG_SPARSEMEM is not enabled, we now
define it as 46. That is larger than the real number of physical
address bits, and breaks calculations in zsmalloc:
mm/zsmalloc.c:130:49: warning: right shift count is negative
MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS))
^~
...
mm/zsmalloc.c:253:21: error: variably modified 'size_class' at file scope
struct size_class *size_class[ZS_SIZE_CLASSES];
^~~~~~~~~~
Fixes: 4ffe713b75 ("powerpc/mm: Increase the max addressable memory to 2PB")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The write_parport_reg_nonblock() helper takes a reference to the struct
mos_parport, but failed to release it in a couple of error paths after
allocation failures, leading to a memory leak.
Johan said that move the kref_get() and mos_parport assignment to the
end of urbtrack initialisation is a better way, so move it. and
mos_parport do not used until urbtrack initialisation.
Signed-off-by: Lin Yi <teroincn@163.com>
Fixes: b69578df7e ("USB: usbserial: mos7720: add support for parallel port on moschip 7715")
Cc: stable <stable@vger.kernel.org> # 2.6.35
Signed-off-by: Johan Hovold <johan@kernel.org>
Enable PCI-E controller for Oxalis board based on NXP/Freescale LS1012a
SoC available as the Mini PCI-E connector on the bottom side.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Increase the reset duration to ensure correct phy functionality. The
reset duration is taken from barebox commit 52fdd510de ("ARM: dts:
pfla02: use long enough reset for ethernet phy"):
Use a longer reset time for ethernet phy Micrel KSZ9031RNX. Otherwise a
small percentage of modules have 'transmission timeouts' errors like
barebox@Phytec phyFLEX-i.MX6 Quad Carrier-Board:/ ifup eth0
warning: No MAC address set. Using random address 7e:94:4d:02:f8:f3
eth0: 1000Mbps full duplex link detected
eth0: transmission timeout
T eth0: transmission timeout
T eth0: transmission timeout
T eth0: transmission timeout
T eth0: transmission timeout
Cc: Stefan Christ <s.christ@phytec.de>
Cc: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Fixes: 3180f95666 ("ARM: dts: Phytec imx6q pfla02 and pbab01 support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
K3 devices have the same EHRPWM IP as OMAP SoCs. Enable the driver to be
built for K3 devices. Also, drop reference to AM33xx in help text, as IP
is found on multiple TI SoCs.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Exercise acquiring and releasing forcewake around register reads. In
order to read a register behind a GT powerwell, we need to instruct that
powerwell to wake up using a forcewake. When we no longer require the GT
powerwell, we tell the GT to release our forcewake. Inside the
forcewake, the register read should work but outside it should just
return garbage, 0 being the most common garbage. Thus we can detect when
we are inside and outside of the forcewake with just a simple register
read, and so can verify that the GT powerwell is released when we say
so.
v2: Picking the right forcewaked register to return 0 outside of
forcewake is an art.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190320080052.27273-1-chris@chris-wilson.co.uk
Add a new compatible string "ti,am654-ehrpwm" to support EHRPWM IP on
TI AM654 SoC.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
It must be made sure that immediate mode is not already set, when
modifying shadow register value in ehrpwm_pwm_disable(). Otherwise
modifications to the action-qualifier continuous S/W force
register(AQSFRC) will be done in the active register.
This may happen when both channels are being disabled. In this case,
only the first channel state will be recorded as disabled in the shadow
register. Later, when enabling the first channel again, the second
channel would be enabled as well. Setting RLDCSF to zero, first, ensures
that the shadow register is updated as desired.
Fixes: 38dabd91ff ("pwm: tiehrpwm: Fix disabling of output of PWMs")
Signed-off-by: Christoph Vogtländer <c.vogtlaender@sigma-surface-science.com>
[vigneshr@ti.com: Improve commit message]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
When building with -Wsometimes-uninitialized, Clang warns:
drivers/pwm/pwm-img.c:126:13: error: variable 'timebase' is used
uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
The final else if functions as an else; make that explicit so that Clang
understands that timebase cannot be used uninitialized.
Link: https://github.com/ClangBuiltLinux/linux/issues/400
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Checkpatch wants to use 'help' instead of '---help---':
WARNING: prefer 'help' over '---help---' for new help texts
Let's change it globally at the media subsystem, as otherwise people
would keep using the old way.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This is not how ACPI tables are written. Add a deprecation note and refer
to the proper documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
When no alarm has been programmed on RSK-RZA1, an error message is
printed during boot:
rtc rtc0: invalid alarm value: 2019-03-14T255:255:255
sh_rtc_read_alarm_value() returns 0xff when querying a hardware alarm
field that is not enabled. __rtc_read_alarm() validates the received
alarm values, and fills in missing fields when needed.
While 0xff is handled fine for the year, month, and day fields, and
corrected as considered being out-of-range, this is not the case for the
hour, minute, and second fields, where -1 is expected for missing
fields.
Fix this by returning -1 instead, as this value is handled fine for all
fields.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Set the entity function for the four CSI-2 receiver sub-devices the driver
creates. This avoids a kernel warning from each as well.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
kmemdup may fail and return NULL. The fix adds a check and returns
NULL in case it fails to avoid NULL pointer dereferecen.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In case kzalloc fails, the fix releases resources and returns
-ENOMEM to avoid the NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The lens drivers had ended up under the video decoder section; add a new
one just for them, between the camera sensors and flash drivers.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
If we encounter a failure during suspend where this RTC was programmed
to wakeup the system from suspend, but that wakeup couldn't be
configured because the system didn't support wakeup interrupts, we'll
run into the following warning:
Unbalanced IRQ 166 wake disable
WARNING: CPU: 7 PID: 3071 at kernel/irq/manage.c:669 irq_set_irq_wake+0x108/0x278
This happens because the suspend process isn't aborted when the RTC
fails to configure the wakeup IRQ. Instead, we continue suspending the
system and then another suspend callback fails the suspend process and
"unwinds" the previously suspended drivers by calling their resume
callbacks. When we get back to resuming this RTC driver, we'll call
disable_irq_wake() on an IRQ that hasn't been configured for wake.
Let's just fail suspend/resume here if we can't configure the system to
wake and the user has chosen to wakeup with this device. This fixes this
warning and makes the code more robust in case there are systems out
there that can't wakeup from suspend on this line but the user has
chosen to do so.
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Evan Green <evgreen@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Acked-By: Benson Leung <bleung@chromium.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
ti-vpe driver parsed the remote endpoints for properties but ignored the
local ones. Fix this by parsing the local endpoint properties instead.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
V4L2 fwnode matching right now still works based on device nodes, not port
nodes. Fix this.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
C-PHY has no clock lanes. Therefore the first data lane is 0 by default.
Fixes: edc6d56c2e ("media: v4l: fwnode: Support parsing of CSI-2 C-PHY endpoints")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The lack of defaults provided by the caller to
v4l2_fwnode_endpoint_parse() signals the use of the default lane mapping.
The default lane mapping must not be used however if the firmmare contains
the lane mapping. Disable the default lane mapping in that case, and
improve the debug messages telling of the use of the defaults.
This was missed previously since the default mapping will only unsed in
this case if the bus type is set, and no driver did both while still
needing the lane mapping configuration.
Fixes: b4357d21d6 ("media: v4l: fwnode: Support default CSI-2 lane mapping for drivers")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Since commit 3d6a8fe256 ("media: ov7670: hook s_power onto v4l2 core"),
the device is actually powered off while the video stream is stopped.
So now set_format and s_frame_interval could be called while the device
is powered off, but these callbacks try to change the register settings
at this time.
The frame format and framerate will be restored right after power-up, so
we can just postpone applying these changes at these callbacks if the
device is not powered up.
Fixes: 3d6a8fe256 ("media: ov7670: hook s_power onto v4l2 core")
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Lubomir Rintel <lkundrak@v3.sk>
Tested-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Since commit 3d6a8fe256 ("media: ov7670: hook s_power onto v4l2 core"),
the device is actually powered off while the video stream is stopped.
The frame format and framerate are restored right after power-up, but
restoring the default register settings is forgotten.
Fixes: 3d6a8fe256 ("media: ov7670: hook s_power onto v4l2 core")
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Lubomir Rintel <lkundrak@v3.sk>
Tested-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The imgu_css_queue structure is too large to be put on the kernel
stack, as we can see in 32-bit builds:
drivers/staging/media/ipu3/ipu3-css.c: In function 'imgu_css_fmt_try':
drivers/staging/media/ipu3/ipu3-css.c:1863:1: error: the frame size of 1172 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
By dynamically allocating this array, the stack usage goes down to an
acceptable 140 bytes for the same x86-32 configuration.
Fixes: f5f2e42735 ("media: staging/intel-ipu3: Add css pipeline programming")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Cao, Bingbu <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
