It is possible to pass a negative number as the fd and that has to be
handled, so stop using 'unsigned int fd' in the ioctl syscall 'cmd'
beautifier.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-b7qwa0l19dswa09h3s41akfu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we get all the tests in a single .c file for a first test,
tools/build/feature/test-all.c, if individual tests set that define and
fail to undef it at its end, then it the test-all.c build will fail due
to defining _GNU_SOURCE multiple times, getting us to the slow path,
so undef it at the end in tests that define it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-w6s00jfo1xabgphzczadl59b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Synthesizing BPF events is only supported for root. Silent warning msg
when non-root user runs perf-record.
Reported-by: David Carrillo-Cisneros <davidca@fb.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: David Carrillo-Cisneros <davidca@fb.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190204193140.719740-1-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Descriptions of metrics for POWER9 processors can be found in the
"POWER9 Performance Monitor Unit User’s Guide", which is currently
available on the "IBM Portal for OpenPOWER"
(https://www-355.ibm.com/systems/power/openpower/welcome.xhtml) at
https://www-355.ibm.com/systems/power/openpower/posting.xhtml?postingId=4948CDE1963C9BCA852582F800718190
This patch is for metric groups:
- branch_prediction
- instruction_stats_percent_per_ref
- latency
- lsu_rejects
- memory
- prefetch
- translation
Plus, some whitespace changes.
Signed-off-by: Paul Clarke <pc@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20190209181429.23950-4-pc@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Descriptions of metrics for POWER9 processors can be found in the
"POWER9 Performance Monitor Unit User’s Guide", which is currently
available on the "IBM Portal for OpenPOWER"
(https://www-355.ibm.com/systems/power/openpower/welcome.xhtml) at
https://www-355.ibm.com/systems/power/openpower/posting.xhtml?postingId=4948CDE1963C9BCA852582F800718190
This patch is for metric groups:
- dl1_reloads_percent_per_inst
- dl1_reloads_percent_per_ref
- instruction_misses_percent_per_inst
- l2_stats
- l3_stats
- pteg_reloads_percent_per_inst
- pteg_reloads_percent_per_ref
Signed-off-by: Paul Clarke <pc@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20190209181429.23950-3-pc@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
POWER8 metrics are not well publicized. Some are here:
https://www.ibm.com/support/knowledgecenter/en/SSFK5S_2.2.0/com.ibm.cluster.pedev.v2r2.pedev100.doc/bl7ug_derivedmetricspower8.htm
This patch is for metric groups:
- branch_prediction
- latency
- bus_stats
- instruction_mix
- instruction_stats_percent_per_ref
Signed-off-by: Paul Clarke <pc@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190207175314.31813-4-pc@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
POWER8 metrics are not well publicized.
Some are here:
https://www.ibm.com/support/knowledgecenter/en/SSFK5S_2.2.0/com.ibm.cluster.pedev.v2r2.pedev100.doc/bl7ug_derivedmetricspower8.htm
This patch is for metric groups:
- dl1_reloads_percent_per_inst
- dl1_reloads_percent_per_ref
- instruction_misses_percent_per_inst
- l2_stats
- lsu_rejects
- memory
- pteg_reloads_percent_per_inst
- pteg_reloads_percent_per_ref
Signed-off-by: Paul Clarke <pc@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190207175314.31813-3-pc@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On IBM z13 machine types 2964 and 2965 the descriptor
sizes for sampling and diagnostic sampling entries
might be missing in the trailer entry and are set to zero.
This leads to a perf report failure when processing diagnostic
sampling entries.
This patch adds missing descriptor sizes when the trailer entry
contains zero for these fields.
Output before:
[root@s38lp82 perf]# ./perf report --stdio | fgrep Samples
0xabbf0 [0x8]: failed to process type: 68
Error:
failed to process sample
[root@s38lp82 perf]#
Output after:
[root@s38lp82 perf]# ./perf report --stdio | fgrep Samples
# Total Lost Samples: 0
# Samples: 3K of event 'SF_CYCLES_BASIC_DIAG'
# Samples: 162 of event 'CF_DIAG'
[root@s38lp82 perf]#
Fixes: 2b1444f2e2 ("perf report: Add raw report support for s390 auxiliary trace")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20190211100627.85714-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After 'commit e22c1c7511 ("perf thread: Don't include symbol.h,
symbol_conf.h is enough")'
Compilation of the perf tools is broken when using the functionality
provided by the openCSD library:
[...]
... timerfd: [ on ]
... sched_getcpu: [ on ]
... sdt: [ OFF ]
... setns: [ on ]
... libopencsd: [ on ]
[...]
CC util/arm-spe.o
CC util/arm-spe-pkt-decoder.o
CC util/s390-cpumsf.o
CC util/cs-etm.o
CC util/parse-branch-options.o
util/cs-etm.c: In function ‘cs_etm__mem_access’:
util/cs-etm.c:297:24: error: storage size of ‘al’ isn’t known
struct addr_location al;
And rightly so since file cs-etm.c doesn't include symbol.h, something
that is rectified in this patch.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki K Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190208223543.31836-1-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
au_verfsize will be needed for a non-flavor-specific computation
in a subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When np is NULL i2s_pdata could also be NULL but i2s_pdata is now being
dereferenced without proper check. Fix this and shorten the error message
so we don't exceed 80 characters limit.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is now no users of this flag so remove it together with
related code. The chan_name field of snd_dmaengine_dai_dma_data
data structure is not removed as it is still in use by the PXA
platform.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Populate ->get_features() dw_pcie_ep_ops to return the EPC features
supported by Cadence PCIe endpoint controller.
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Populate ->get_features() dw_pcie_ep_ops to return the EPC features
supported by Rockchip PCIe endpoint controller.
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Populate ->get_features() dw_pcie_ep_ops to return the EPC features
supported by DRA7xx PCIe endpoint controller.
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Populate ->get_features() dw_pcie_ep_ops to return the EPC features
supported by Designware PCIe endpoint controller.
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Each platform using Designware PCIe core can support different set of
endpoint features. Add a new callback function ->get_features() in
dw_pcie_ep_ops so that each platform using Designware PCIe core can
advertise its supported features to the endpoint function driver.
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Add a new pci_epc_ops ->get_features() to get the features
supported by the EPC. Since EPC can provide different features to
different functions, the ->get_features() ops takes _func_no_ as
an argument.
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Commit ca83b4a7f2 ("x86/KVM/VMX: Add find_msr() helper function")
introduces the helper function find_msr(), which returns -ENOENT when
not find the msr in vmx->msr_autoload.guest/host. Correct checking contion
of no more available entry in vmx->msr_autoload.
Fixes: ca83b4a7f2 ("x86/KVM/VMX: Add find_msr() helper function")
Cc: stable@vger.kernel.org
Signed-off-by: Xiaoyao Li <xiaoyao.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some Posted-Interrupts from passthrough devices may be lost or
overwritten when the vCPU is in runnable state.
The SN (Suppress Notification) of PID (Posted Interrupt Descriptor) will
be set when the vCPU is preempted (vCPU in KVM_MP_STATE_RUNNABLE state but
not running on physical CPU). If a posted interrupt comes at this time,
the irq remapping facility will set the bit of PIR (Posted Interrupt
Requests) but not ON (Outstanding Notification). Then, the interrupt
will not be seen by KVM, which always expects PID.ON=1 if PID.PIR=1
as documented in the Intel processor SDM but not in the VT-d specification.
To fix this, restore the invariant after PID.SN is cleared.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Certain NFS results (eg. READLINK) might expect a data payload that
is not an exact multiple of 4 bytes. In this case, XDR encoding
is required to pad that payload so its length on the wire is a
multiple of 4 bytes. The constants that define the maximum size of
each NFS result do not appear to account for this extra word.
In each case where the data payload is to be received into pages:
- 1 word is added to the size of the receive buffer allocated by
call_allocate
- rpc_inline_rcv_pages subtracts 1 word from @hdrsize so that the
extra buffer space falls into the rcv_buf's tail iovec
- If buf->pagelen is word-aligned, an XDR pad is not needed and
is thus removed from the tail
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
read ROHM BD71837 / BD71847 specific device tree bindings for
controlling the PMIC shutdown/reset states and voltages for
different HW states. The PMIC was designed to be used with NXP
i.MX8 SoC and it supports SNVS low power state which seems to
be typical for NXP i.MX SoCs. However, when SNVS is used we must
not allow SW to control enabling/disabling those regulators which
are crucial for system to boot as there is a HW limitation which
causes SW controlled regulators to be kept shut down after SNVS
reset.
Allow setting the SNVS to be used as reset target state and allow
marking those regulators which are critical for boot.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Tested-by: Angus Ainslie <angus@akkea.ca>
Reviewed-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add regulator_desc_list_voltage_linear_range which can be used
by drivers for getting the voltages before regulator is registered.
This may be useful for drivers which need to fetch the voltage
selectors at device-tree parsing callback.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: Angus Ainslie <angus@akkea.ca>
Reviewed-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ROHM BD71837 / BD71847 specific device tree bindings for
controlling the PMIC shutdown/reset states and voltages for
different HW states. The PMIC was designed to be used with NXP
i.MX8 SoC and it supports SNVS low power state which seems to
be typical for NXP i.MX SoCs. However, when SNVS is used we must
not allow SW to control enabling/disabling those regulators which
are crucial for system to boot as there is a HW limitation which
causes SW controlled regulators to be kept shut down after SNVS
reset.
Allow setting the SNVS to be used as reset target state and allow
marking those regulators which are critical for boot.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Tested-by: Angus Ainslie <angus@akkea.ca>
Reviewed-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Mark Brown <broonie@kernel.org>
prepare_reply_buffer() and its NFSv4 equivalents expose the details
of the RPC header and the auth slack values to upper layer
consumers, creating a layering violation, and duplicating code.
Remedy these issues by adding a new RPC client API that hides those
details from upper layers in a common helper function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Files under net/sunrpc/auth_gss/ do not yet have SPDX ID tags.
This directory is somewhat complicated because most of these files
have license boilerplate that is not strictly GPL 2.0.
In this patch I add ID tags where there is an obvious match. The
less recognizable licenses are still under research.
For reference, SPDX IDs added in this patch correspond to the
following license text:
GPL-2.0 https://spdx.org/licenses/GPL-2.0.html
GPL-2.0+ https://spdx.org/licenses/GPL-2.0+.html
BSD-3-Clause https://spdx.org/licenses/BSD-3-Clause.html
Cc: Simo Sorce <simo@redhat.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The previous implementatation was restrictive with regards to
BCLK rates for slave mode where the driver would not allow rates
the codec couldn't provide itself as clock master. The codec
is able to automatically determine and handle whatever rate is
provided so this restriction isn't necessary for slave mode. The
code was also flawed with regards to setting of the frame offset
as using rx_mask to explicitly set the offset has the knock on
effect of impacting the min and max channels for the codec, in
soc_pcm_hw_params() through the call to
soc_pcm_codec_params_fixup().
With this update, the driver now only limits frame size if codec
is clock master, and dynamically determines the BCLK offset
relating to WCLK using the tx_mask for slot offset along with the
slot width provided.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously the driver would default the BCLK periods per WCLK to
64, to cover all possible non-TDM scenarios when the codec was
DAI clock master. However some devices require a lower BCLK rate
to operate correctly so with this in mind, this commit updates
the code to be more dynamic, with BCLK rate now based on SR and
word length provided to hw_params().
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As a result of exporting the bd70528 specific locking functions
we no longer need struct bd70528. Remove references to
struct bd70528 from bd70528 regulator.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Spelling error fixes, upper/lower case letter changes.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Change indentation so this macro definition spans 2 rows and looks
more consistent with surrounding code.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The key action of xdr_buf_trim() is that it shortens buf->len, the
length of the xdr_buf's content. The other actions -- shortening the
head, pages, and tail components -- are actually not necessary. In
particular, changing the size of those components can corrupt the
RPC message contained in the buffer. This is an accident waiting to
happen rather than a current bug, as far as we know.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Bruce Fields <bfields@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the probe call is on the primary DAI we can use 'other' in place of
i2s->sec_dai, if the probe call is on the secondary DAI we can use 'i2s'
in place of other->sec_dai.
While at it fix one whitespace issue.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add infrastructure for trace points in the RPC_AUTH_GSS kernel
module, and add a few sample trace points. These report exceptional
or unexpected events, and observe the assignment of GSS sequence
numbers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Change the coding style to make it does error checking first.
This also fixes checkpatch warning about line over 80 characters.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Tested by: Thor Thayer <thor.thayer@linux.intel.com>
Reviewed by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The new prefix allows the GPIOs to be uniquely identified on a per-chip
basis, which makes it easier to distinguish Tegra186 specific GPIOs from
those of later chips such as Tegra194 which supports a very different
set of GPIOs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Typo: the data line is called "SDA" not "SCA".
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
madera_gpio_chip is only used as a template so it can be marked as const.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The NXP PCAL6416, documented at [1], is a variant of the PCA GPIO
expander with 16 GPIOs, and supporting an interrupt and the "extended"
features for interrupt, pull-up/pull-down configuration, etc.
[1] https://www.nxp.com/docs/en/data-sheet/PCAL6416A.pdf
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The NXP PCAL6416 is a variant of the PCA GPIO expander, with 16 GPIOs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Modernize and harden the code path that parses an RPC Reply
message.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The prepare_fb call always happens on new_plane_state.
The drm_atomic_helper_cleanup_planes checks to see if
plane state pointer has changed when deciding to call cleanup_fb on
either the new_plane_state or the old_plane_state.
For a non-async atomic commit the state pointer is swapped, so this
helper calls prepare_fb on the new_plane_state and cleanup_fb on the
old_plane_state. This makes sense, since we want to prepare the
framebuffer we are going to use and cleanup the the framebuffer we are
no longer using.
For the async atomic update helpers this differs. The async atomic
update helpers perform in-place updates on the existing state. They call
drm_atomic_helper_cleanup_planes but the state pointer is not swapped.
This means that prepare_fb is called on the new_plane_state and
cleanup_fb is called on the new_plane_state (not the old).
In the case where old_plane_state->fb == new_plane_state->fb then
there should be no behavioral difference between an async update
and a non-async commit. But there are issues that arise when
old_plane_state->fb != new_plane_state->fb.
The first is that the new_plane_state->fb is immediately cleaned up
after it has been prepared, so we're using a fb that we shouldn't
be.
The second occurs during a sequence of async atomic updates and
non-async regular atomic commits. Suppose there are two framebuffers
being interleaved in a double-buffering scenario, fb1 and fb2:
- Async update, oldfb = NULL, newfb = fb1, prepare fb1, cleanup fb1
- Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb2
- Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2
We call cleanup_fb on fb2 twice in this example scenario, and any
further use will result in use-after-free.
The simple fix to this problem is to block framebuffer changes
in the drm_atomic_helper_async_check function for now.
v2: Move check by itself, add a FIXME (Daniel)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: <stable@vger.kernel.org> # v4.14+
Fixes: fef9df8b59 ("drm/atomic: initial support for asynchronous plane update")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/275364/
Organize MG PHY macro definitions semantically based on dword, lane and
port (in this order).
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Manasi navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128220012.13122-3-aditya.swarup@intel.com
Organize combo PHY DDI macro definitions semantically based on dword,
lane and port (in this order).
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128220012.13122-2-aditya.swarup@intel.com
