Rather than checking the DMA attribute at each callsite, just pass it
through for acpi_dma_configure() to handle directly. That can then deal
with the relatively exceptional DEV_DMA_NOT_SUPPORTED case by explicitly
installing dummy DMA ops instead of just skipping setup entirely. This
will then free up the dev->dma_ops == NULL case for some valuable
fastpath optimisations.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Tony Luck <tony.luck@intel.com>
The dummy DMA ops are currently used by arm64 for any device which has
an invalid ACPI description and is thus barred from using DMA due to not
knowing whether is is cache-coherent or not. Factor these out into
general dma-mapping code so that they can be referenced from other
common code paths. In the process, we can prune all the optional
callbacks which just do the same thing as the default behaviour, and
fill in .map_resource for completeness.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[hch: moved to a separate source file]
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
All architectures except for sparc64 use the dma-direct code in some
form, and even for sparc64 we had the discussion of a direct mapping
mode a while ago. In preparation for directly calling the direct
mapping code don't bother having it optionally but always build the
code in. This is a minor hardship for some powerpc and arm configs
that don't pull it in yet (although they should in a relase ot two),
and sparc64 which currently doesn't need it at all, but it will
reduce the ifdef mess we'd otherwise need significantly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
This isn't exactly a slow path routine, but it is not super critical
either, and moving it out of line will help to keep the include chain
clean for the following DMA indirection bypass work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
There is no need to have all setup and coherent allocation / freeing
routines inline. Move them out of line to keep the implemeation
nicely encapsulated and save some kernel text size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
dma_get_required_mask should really be with the rest of the DMA mapping
implementation instead of in drivers/base as a lone outlier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
The two functions are exactly the same, so don't bother implementing
them twice.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
We can just call the regular calls after adding offset the the address instead
of reimplementing them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
We already zero the memory after allocating it from the pool that
this function fills, and having the memset here in this form means
we can't support CMA highmem allocations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Russell King - ARM Linux <linux@armlinux.org.uk>
This patch fixes the udmabuf selftest. Currently the selftest is broken.
I fixed the selftest by setting the F_SEAL_SHRINK seal on the memfd
file descriptor which is required by udmabuf and added the test to
the selftest Makefile.
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Since mkfs always formats the filesystem with the realtime bitmap and
summary inodes immediately after the root directory, we should expect
that both of them are present and loadable, even if there isn't a
realtime volume attached. There's no reason to skip this if rbmino ==
NULLFSINO; in fact, this causes an immediate crash if the there /is/ a
realtime volume and someone writes to it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
There is a spelling mistake in the --gettimeleft help text, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Pull NVMe updates from Christoph:
"Here is the second large chunk of nvme updates for 4.21:
- host and target support for NVMe over TCP (Sagi Grimberg,
Roy Shterman, Solganik Alexander)
- error log page support in target (Chaitanya Kulkarni)
plus small fixes and improvements from Jens Axboe and Chengguang Xu."
* 'nvme-4.21' of git://git.infradead.org/nvme: (33 commits)
nvme-rdma: support separate queue maps for read and write
nvme-tcp: support separate queue maps for read and write
nvme-fabrics: allow user to set nr_write_queues for separate queue maps
nvme-fabrics: add missing nvmf_ctrl_options documentation
blk-mq-rdma: pass in queue map to blk_mq_rdma_map_queues
nvmet: update smart log with num err log entries
nvmet: add error log page cmd handler
nvmet: add error log support for file backend
nvmet: add error log support for bdev backend
nvmet: add error log support for admin-cmd
nvmet: add error log support for rdma backend
nvmet: add error log support for fabrics-cmd
nvmet: add error log support in the core
nvmet: add interface to update error-log page
nvmet: add error-log definitions
nvme: add error log page slot definition
nvme: remove nvme_common command cdw10 array
nvmet: remove unused variable
nvme: provide fallback for discard alloc failure
nvme: add __exit annotation
...
Before 98f4c65176, we returned zeros for unopened channels.
With 98f4c65176, we started to return random on-stack values.
We'd better return -EINVAL instead.
Fixes: 98f4c65176 ("hv: move ringbuffer bus attributes to dev_groups")
Cc: stable@vger.kernel.org
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Specifying a starting ID greater than the maximum ID isn't something
attempted very often, but it should fail. It was succeeding due to
xas_find_marked() returning the wrong error state, so add tests for
both xa_alloc() and xas_find_marked().
Fixes: b803b42823 ("xarray: Add XArray iterators")
Signed-off-by: Matthew Wilcox <willy@infradead.org>
__NR_Linux_syscalls macro holds the number of system call
exist in mips architecture. We have to change the value of
__NR_Linux_syscalls, if we add or delete a system call.
One of the patch in this patch series has a script which
will generate a uapi header based on syscall.tbl file.
The syscall.tbl file contains the total number of system
calls information. So we have two option to update __NR-
_Linux_syscalls value.
1. Update __NR_Linux_syscalls in asm/unistd.h manually
by counting the no.of system calls. No need to update
__NR_Linux_syscalls until we either add a new system
call or delete existing system call.
2. We can keep this feature it above mentioned script,
that will count the number of syscalls and keep it in
a generated file. In this case we don't need to expli-
citly update __NR_Linux_syscalls in asm/unistd.h file.
The 2nd option will be the recommended one. For that, I
added the __NR_syscalls macro in uapi/asm/unistd.h along
with __NR_Linux_syscalls. The macro __NR_syscalls also
added for making the name convention same across all
architecture. While __NR_syscalls isn't strictly part of
the uapi, having it as part of the generated header to
simplifies the implementation. We also need to enclose
this macro with #ifdef __KERNEL__ to avoid side effects.
Signed-off-by: Firoz Khan <firoz.khan@linaro.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: y2038@lists.linaro.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: arnd@arndb.de
Cc: deepa.kernel@gmail.com
Cc: marcin.juszkiewicz@linaro.org
- One performance regression for hfi1
- One kasan fix for hfi1
- A couple mlx5 fixes
- A core oops fix
-----BEGIN PGP SIGNATURE-----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=P1FB
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Doug Ledford:
"We have 5 small fixes for this pull request. One is a performance
regression, so not necessarily strictly a fix, but it was small and
reasonable and claimed to avoid thrashing in the scheduler, so I took
it. The remaining are all legitimate fixes that match the "we take
fixes any time" criteria.
Summary:
- One performance regression for hfi1
- One kasan fix for hfi1
- A couple mlx5 fixes
- A core oops fix"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/core: Fix oops in netdev_next_upper_dev_rcu()
IB/mlx5: Block DEVX umem from the non applicable cases
IB/mlx5: Fix implicit ODP interrupted page fault
IB/hfi1: Fix an out-of-bounds access in get_hw_stats
IB/hfi1: Fix a latency issue for small messages
Only usual suspects here: a few more fixups for Realtek HD-audio on
various PCs, including a regression fix in the previous fix for
Lenovo X1 Carbon, as well as a typo fix in the recent Fireface patch.
-----BEGIN PGP SIGNATURE-----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=3Ked
-----END PGP SIGNATURE-----
Merge tag 'sound-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Only usual suspects here: a few more fixups for Realtek HD-audio on
various PCs, including a regression fix in the previous fix for Lenovo
X1 Carbon, as well as a typo fix in the recent Fireface patch"
* tag 'sound-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Enable audio jacks of ASUS UX433FN/UX333FA with ALC294
ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294
ALSA: hda/realtek: ALC294 mic and headset-mode fixups for ASUS X542UN
ALSA: fireface: fix reference to wrong register for clock configuration
ALSA: hda/realtek - Fix the mute LED regresion on Lenovo X1 Carbon
ALSA: hda/realtek - Fixed headphone issue for ALC700
For certain applications it is desirable to rapidly boot a KVM virtual
machine. In cases where legacy hardware and software support within the
guest is not needed, Qemu should be able to boot directly into the
uncompressed Linux kernel binary without the need to run firmware.
There already exists an ABI to allow this for Xen PVH guests and the ABI
is supported by Linux and FreeBSD:
https://xenbits.xen.org/docs/unstable/misc/pvh.html
This patch enables Qemu to use that same entry point for booting KVM
guests.
Signed-off-by: Maran Wilson <maran.wilson@oracle.com>
Suggested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Suggested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The start info structure that is defined as part of the x86/HVM direct boot
ABI and used for starting Xen PVH guests would be more versatile if it also
included a way to pass information about the memory map to the guest. This
would allow KVM guests to share the same entry point.
Signed-off-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
We need to refactor PVH entry code so that support for other hypervisors
like Qemu/KVM can be added more easily.
The original design for PVH entry in Xen guests relies on being able to
obtain the memory map from the hypervisor using a hypercall. When we
extend the PVH entry ABI to support other hypervisors like Qemu/KVM,
a new mechanism will be added that allows the guest to get the memory
map without needing to use hypercalls.
For Xen guests, the hypercall approach will still be supported. In
preparation for adding support for other hypervisors, we can move the
code that uses hypercalls into the Xen specific file. This will allow us
to compile kernels in the future without CONFIG_XEN that are still capable
of being booted as a Qemu/KVM guest via the PVH entry point.
Signed-off-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
We need to refactor PVH entry code so that support for other hypervisors
like Qemu/KVM can be added more easily.
This patch moves the small block of code used for initializing Xen PVH
virtual machines into the Xen specific file. This initialization is not
going to be needed for Qemu/KVM guests. Moving it out of the common file
is going to allow us to compile kernels in the future without CONFIG_XEN
that are still capable of being booted as a Qemu/KVM guest via the PVH
entry point.
Signed-off-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
We need to refactor PVH entry code so that support for other hypervisors
like Qemu/KVM can be added more easily.
The first step in that direction is to create a new file that will
eventually hold the Xen specific routines.
Signed-off-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Once hypervisors other than Xen start using the PVH entry point for
starting VMs, we would like the option of being able to compile PVH entry
capable kernels without enabling CONFIG_XEN and all the code that comes
along with that. To allow that, we are moving the PVH code out of Xen and
into files sitting at a higher level in the tree.
This patch is not introducing any code or functional changes, just moving
files from one location to another.
Signed-off-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
In order to pave the way for hypervisors other than Xen to use the PVH
entry point for VMs, we need to factor the PVH entry code into Xen specific
and hypervisor agnostic components. The first step in doing that, is to
create a new config option for PVH entry that can be enabled
independently from CONFIG_XEN.
Signed-off-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Currently for liveness and state pruning the register parentage
chains don't include states of the callee. This makes some sense
as the callee can't access those registers. However, this means
that READs done after the callee returns will not propagate into
the states of the callee. Callee will then perform pruning
disregarding differences in caller state.
Example:
0: (85) call bpf_user_rnd_u32
1: (b7) r8 = 0
2: (55) if r0 != 0x0 goto pc+1
3: (b7) r8 = 1
4: (bf) r1 = r8
5: (85) call pc+4
6: (15) if r8 == 0x1 goto pc+1
7: (05) *(u64 *)(r9 - 8) = r3
8: (b7) r0 = 0
9: (95) exit
10: (15) if r1 == 0x0 goto pc+0
11: (95) exit
Here we acquire unknown state with call to get_random() [1]. Then
we store this random state in r8 (either 0 or 1) [1 - 3], and make
a call on line 5. Callee does nothing but a trivial conditional
jump (to create a pruning point). Upon return caller checks the
state of r8 and either performs an unsafe read or not.
Verifier will first explore the path with r8 == 1, creating a pruning
point at [11]. The parentage chain for r8 will include only callers
states so once verifier reaches [6] it will mark liveness only on states
in the caller, and not [11]. Now when verifier walks the paths with
r8 == 0 it will reach [11] and since REG_LIVE_READ on r8 was not
propagated there it will prune the walk entirely (stop walking
the entire program, not just the callee). Since [6] was never walked
with r8 == 0, [7] will be considered dead and replaced with "goto -1"
causing hang at runtime.
This patch weaves the callee's explored states onto the callers
parentage chain. Rough parentage for r8 would have looked like this
before:
[0] [1] [2] [3] [4] [5] [10] [11] [6] [7]
| | ,---|----. | | |
sl0: sl0: / sl0: \ sl0: sl0: sl0:
fr0: r8 <-- fr0: r8<+--fr0: r8 `fr0: r8 ,fr0: r8<-fr0: r8
\ fr1: r8 <- fr1: r8 /
\__________________/
after:
[0] [1] [2] [3] [4] [5] [10] [11] [6] [7]
| | | | | |
sl0: sl0: sl0: sl0: sl0: sl0:
fr0: r8 <-- fr0: r8 <- fr0: r8 <- fr0: r8 <-fr0: r8<-fr0: r8
fr1: r8 <- fr1: r8
Now the mark from instruction 6 will travel through callees states.
Note that we don't have to connect r0 because its overwritten by
callees state on return and r1 - r5 because those are not alive
any more once a call is made.
v2:
- don't connect the callees registers twice (Alexei: suggestion & code)
- add more details to the comment (Ed & Alexei)
v1: don't unnecessarily link caller saved regs (Jiong)
Fixes: f4d7e40a5b ("bpf: introduce function calls (verification)")
Reported-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove no_pcm check to invoke pcm_new() for backend dai-links
too. This fixes crash in hdmi codec driver during hdmi_codec_startup()
while accessing chmap_info struct. chmap_info struct memory is
allocated in pcm_new() of hdmi codec driver which is not invoked
in case of DPCM when hdmi codec driver is part of backend dai-link.
Below is the crash stack:
[ 61.635493] Unable to handle kernel NULL pointer dereference at virtual address 00000018
..
[ 61.666696] CM = 0, WnR = 1
[ 61.669778] user pgtable: 4k pages, 39-bit VAs, pgd = ffffffc0d6633000
[ 61.676526] [0000000000000018] *pgd=0000000153fc8003, *pud=0000000153fc8003, *pmd=0000000000000000
[ 61.685793] Internal error: Oops: 96000046 [#1] PREEMPT SMP
[ 61.722955] CPU: 7 PID: 2238 Comm: aplay Not tainted 4.14.72 #21
..
[ 61.740269] PC is at hdmi_codec_startup+0x124/0x164
[ 61.745308] LR is at hdmi_codec_startup+0xe4/0x164
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Clicks and pops of various volumes can be produced while the device is
opened, closed, put into and taken out of standby, or reconfigured.
Fix this, by implementing the digital_mute interface, so that the
output is muted during such operations.
Signed-off-by: Dimitris Papavasiliou <dpapavas@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Access to GICR_WAKER is restricted on msm8996 SoC in Hypervisor.
Its been more than 2+ years of wait for this to be fixed, which has
no hopes to be fixed. This change was introduced for the "lead device"
on msm8996 platform. It looks like all publicly available msm8996 and
other Qualcomm SoCs have this implementation.
So add a quirk to not access this register on msm8996.
With this quirk MSM8996 can at least boot out of mainline,
which can help community to work with boards based on MSM8996 and other
SoCs with have this restrictions. This Quirk is based on device tree
compatible string.
Without this patch Qualcomm DB820c board reboots when GICR_WAKER
is accessed.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This patch adds support to device tree based quirks based on
device tree compatible string.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Access to GICR_WAKER is restricted on msm8996 SoC in Hypervisor.
There are many devices out there with this restriction in place
and there has been no update to this firmware since last few years,
making those devices totally unusable for upstream development.
IIDR register value conflicts with other SoCs, using compatible seems
to be the only way to apply quirks required for msm8996 based SoCs.
Without this quirk many qcom SoCs (atleast 3 that I know) are
unable to boot mainline.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Convert trivial-devices.txt to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The Brownstone board is compatible with "mrvl,mmp2". The actual DTS
already contains the string -- add it to the binding doc as well.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Tegra SoC bindings to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: devicetree@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert ZTE SoC bindings to DT schema format using json-schema.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Add missing description for Ultra96, zcu104, zcu106 and zcu111.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Xilinx SoC bindings to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert VIA SoC bindings to DT schema format using json-schema.
Cc: Tony Prisk <linux@prisktech.co.nz>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert ST STi SoC bindings to DT schema format using json-schema.
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert CSR SiRF SoC bindings to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert QCom SoC bindings to DT schema format using json-schema.
Acked-by: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert TI NSpire SoC bindings to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
