Offload of geneve decap rules is supported in NFP. Include geneve in the
check for supported types.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make use of the recently added VXLAN and geneve helper functions to
determine the type of the netdev from its rtnl_link_ops.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper function to determine if the type of a netdev is geneve based
on its rtnl_link_ops. This allows drivers that may wish to offload tunnels
to check the underlying type of the device.
A recent patch added a similar helper to vxlan.h
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function perf_init_event() creates a new event and
assignes it to a PMU. This a done in a loop over all existing
PMUs. For each listed PMU the event init function is called
and if this function does return any other error than -ENOENT,
the loop is terminated the creation of the event fails.
If the event is invalid, return -ENOENT to try other PMUs.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Expose the MUM/SUC Firmware, UEFI Expansion ROM and MC Status partitions
of the NIC's NVRAM as MTDs if found on the NIC. The first two are needed
in order to properly update them when performing firmware updates; the MC
Status partition is used to determine whether a signed firmware image was
accepted or rejected by a Secure NIC.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
check_dl_overrun() is used to send a SIGXCPU to users that asked to be
informed when a SCHED_DEADLINE runtime overruns occur.
The function is called by check_thread_timers() already, so the call in
check_process_timers() is redundant/wrong (even though harmless).
Remove it.
Fixes: 34be39305a ("sched/deadline: Implement "runtime overrun signal" support")
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-rt-users@vger.kernel.org
Cc: mtk.manpages@gmail.com
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Luca Abeni <luca.abeni@santannapisa.it>
Cc: Claudio Scordino <claudio@evidence.eu.com>
Link: https://lkml.kernel.org/r/20181107111032.32291-1-juri.lelli@redhat.com
Michał Mirosław says:
====================
net/vlan: prepare for removal of VLAN_TAG_PRESENT
This is a preparatory patchset before removing the use of VLAN_TAG_PRESENT
bit in skb->vlan_tci as indication of VLAN offload. This set includes
only cleanups that allow abstracting of code testing VLAN tag presence
in drivers and networking code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
VLAN.TCI == 0 is perfectly valid (802.1p), so allow it to be accelerated.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't request tag insertion when it isn't present in outgoing skb.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set the backlog earlier in inet_dccp_listen() and inet_listen(),
then we can avoid the redundant setting.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Calmels from NVIDIA reported that he's able to bypass the
mount visibility security check in place in the Linux kernel by using
a combination of the unbindable property along with the private mount
propagation option to allow a unprivileged user to see a path which
was purposefully hidden by the root user.
Reproducer:
# Hide a path to all users using a tmpfs
root@castiana:~# mount -t tmpfs tmpfs /sys/devices/
root@castiana:~#
# As an unprivileged user, unshare user namespace and mount namespace
stgraber@castiana:~$ unshare -U -m -r
# Confirm the path is still not accessible
root@castiana:~# ls /sys/devices/
# Make /sys recursively unbindable and private
root@castiana:~# mount --make-runbindable /sys
root@castiana:~# mount --make-private /sys
# Recursively bind-mount the rest of /sys over to /mnnt
root@castiana:~# mount --rbind /sys/ /mnt
# Access our hidden /sys/device as an unprivileged user
root@castiana:~# ls /mnt/devices/
breakpoint cpu cstate_core cstate_pkg i915 intel_pt isa kprobe
LNXSYSTM:00 msr pci0000:00 platform pnp0 power software system
tracepoint uncore_arb uncore_cbox_0 uncore_cbox_1 uprobe virtual
Solve this by teaching copy_tree to fail if a mount turns out to be
both unbindable and locked.
Cc: stable@vger.kernel.org
Fixes: 5ff9d8a65c ("vfs: Lock in place mounts from more privileged users")
Reported-by: Jonathan Calmels <jcalmels@nvidia.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
GSO tunneled packets are always segmented in software before they are
transmitted by a VLAN, even when the lower device can offload tunnel
encapsulation and VLAN together (i.e., some bits in NETIF_F_GSO_ENCAP_ALL
mask are set in the lower device 'vlan_features'). If we let VLANs have
the same tunnel offload capabilities as their lower device, throughput
can improve significantly when CPU is limited on the transmitter side.
- set NETIF_F_GSO_ENCAP_ALL bits in the VLAN 'hw_features', to ensure
that 'features' will have those bits zeroed only when the lower device
has no hardware support for tunnel encapsulation.
- for the same reason, copy GSO-related bits of 'hw_enc_features' from
lower device to VLAN, and ensure to update that value when the lower
device changes its features.
- set NETIF_F_HW_CSUM bit in the VLAN 'hw_enc_features' if 'real_dev'
is able to compute checksums at least for a kind of packets, like done
with commit 8403debeea ("vlan: Keep NETIF_F_HW_CSUM similar to other
software devices"). This avoids software segmentation due to mismatching
checksum capabilities between VLAN's 'features' and 'hw_enc_features'.
Reported-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tun XDP sendmsg code path, unconditionally computes the symmetric
hash of each packet for RFS's sake, even when we could skip it. e.g.
when the device has a single queue.
This change adds the check already in-place for the skb sendmsg path
to avoid unneeded hashing.
The above gives small, but measurable, performance gain for VM xmit
path when zerocopy is not enabled.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add byte queue limits support in the fsl_ucc_hdlc driver.
Signed-off-by: Mathias Thore <mathias.thore@infinera.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of listing every single PHYID, load the driver for every PHYID
with a Realtek OUI, independent of model number and revision.
This patch also improves two further aspects:
- constify realtek_tbl[]
- the mask should have been 0xffffffff instead of 0x001fffff so far,
by masking out some bits a PHY from another vendor could have been
matched
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
phy_trigger_machine() is used in phy.c only, so we can make it static.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It was recently pointed out that the one instance of testing MNT_LOCKED
outside of the namespace_sem is in ksys_umount.
Fix that by adding a test inside of do_umount with namespace_sem and
the mount_lock held. As it helps to fail fails the existing test is
maintained with an additional comment pointing out that it may be racy
because the locks are not held.
Cc: stable@vger.kernel.org
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Fixes: 5ff9d8a65c ("vfs: Lock in place mounts from more privileged users")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Maciej W. Rozycki says:
====================
FDDI: defza: Fix a bunch of small issues
Here is a bunch of small fixes addressing issues that I missed in my
final round of testing. None of these affect run-time behaviour. One was
actually found by the kbuild bot, which turned out to be more pedantic
than my compiler. See individual change descriptions for details.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver version string is obviously not meant to be changed at run
time, so mark it `const'.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the temporary data buffer used when tapping into the SMT Tx queue
from the outer function level into the conditional block it's actually
used in and its containing skb is also declared, making the structure of
code better.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix:
drivers/net/fddi/defza.h:238:1: warning: "/*" within comment [-Wcomment]
by adding a missing comment closing.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SPDX annotation for this driver does not match the license text,
which specifies GNU GPL 2 or later. Make the two match by correcting
the SPDX tag.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current logic first clones the extent array and sorts both copies, then
maps the lower IDs of the forward mapping into the lower namespace, but
doesn't map the lower IDs of the reverse mapping.
This means that code in a nested user namespace with >5 extents will see
incorrect IDs. It also breaks some access checks, like
inode_owner_or_capable() and privileged_wrt_inode_uidgid(), so a process
can incorrectly appear to be capable relative to an inode.
To fix it, we have to make sure that the "lower_first" members of extents
in both arrays are translated; and we have to make sure that the reverse
map is sorted *after* the translation (since otherwise the translation can
break the sorting).
This is CVE-2018-18955.
Fixes: 6397fac491 ("userns: bump idmap limits to 340")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Tested-by: Eric W. Biederman <ebiederm@xmission.com>
Reviewed-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Add support for BCM7255 EPHY.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen reports:
After merging the block tree, today's linux-next build (sparc64 defconfig)
produced this warning:
/home/sfr/next/next/drivers/block/sunvdc.c: In function 'init_queue':
/home/sfr/next/next/drivers/block/sunvdc.c:788:6: warning: unused variable 'ret' [-Wunused-variable]
int ret;
^~~
Kill the unused variable.
Fixes: fa182a1fa9 ("sunvdc: convert to blk-mq")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2018-11-07
This series contains fixes to igb, i40e and ice drivers.
Anirudh fixes an issue during rebuild of the ice driver, where we need
to set the carrier state, as well as start or stop the queues all based
on the link status. Removed functions that were duplicating current
functionality in the VSI rebuild/replay framework.
Dave fixes a potential resource collision during the remove path, so add
a check to see if we are in the middle of a reset. Fixed the remove
path to ensure we call netif_napi_del() to free vectors before we set
vsi->netdev to NULL.
Akeem fixes an issue when the receive or transmit pause parameter is
set, results in link loss on the interface. Fixed the spelling of
"Enabling" in error message.
Victor fixes potential memory leak by also freeing the related VSI
contexts in the unload path.
Md Fahad fixes a flag during port VLAN insertion, which was not being
set properly.
Brett fixes a transmit timeout during stress due to the hardware tail
and software tail were incorrectly out of sync.
Miroslav Lichvar fixes the igb PHC timecounter update interval to be
sure the timecounter is updated in time.
Chinh fixes the req_speeds variable to be u16 instead of u8 so that it
can handle all the link speeds.
Jake fixes i40e to add back the missing feature flags, which was causing
IP-in-IP offloads to be reported as not supported.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The GCC_OFF_SMALL_ASM macro defines the constraint to use for
instructions needing "small offsets", typically the LL or SC
instructions. Historically these had 16 bit offsets, but microMIPS &
MIPS32/MIPS64r6 onwards reduced the width of the offset field.
GCC 4.9 & higher supports a ZC constraint which matches the offset
requirements of the LL & SC instructions. Where supported we can use
the ZC constraint regardless of ISA, and it will handle the requirements
of the ISA correctly. As such we require 3 cases:
- GCC 4.9 & higher can use ZC.
- GCC older than 4.9 must use the older R constraint, which does not
take into account microMIPS or MIPSr6.
- microMIPS builds therefore require GCC 4.9 or higher. MIPSr6 support
was only introduced in newer compilers anyway so it can be ignored
here.
The current code complicates this a little by specifically having MIPSr6
bypass the GCC version check, and using the R constraint for pre-MIPSr6
builds even if the compiler supports ZC which would be equivalent.
Simplify this such that the code straightforwardly implements the 3
cases outlined above.
For non-GCC compilers we presume that ZC is safe to use. In practice the
only non-GCC compiler of interest is clang and it has supported the ZC
constraint since version 3.7.0. It seems safe enough to presume that
nobody will expect to built a working kernel using a clang version older
than that, and if they do then they'll have bigger problems. As such we
don't check the clang version number & just presume ZC is usable when
the compiler is not GCC.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20999/
Cc: linux-mips@linux-mips.org
asm/compiler.h defined GCC_IMM_ASM & GCC_REG_ACCUM macros, both of which
are defined differently for GCC pre-3.4 or GCC 3.4 & higher. We only
support building with GCC 4.6 & higher since commit cafa0010cd ("Raise
the minimum required gcc version to 4.6"), which makes the pre-3.4
definition dead code.
Rather than leave the macro definitions around, inline the GCC 3.4 &
higher definitions into the single file that uses them & remove the
macros entirely.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21000/
Cc: linux-mips@linux-mips.org
Paolo Abeni says:
====================
udp: implement GRO support
This series implements GRO support for UDP sockets, as the RX counterpart
of commit bec1f6f697 ("udp: generate gso with UDP_SEGMENT").
The core functionality is implemented by the second patch, introducing a new
sockopt to enable UDP_GRO, while patch 3 implements support for passing the
segment size to the user space via a new cmsg.
UDP GRO performs a socket lookup for each ingress packets and aggregate datagram
directed to UDP GRO enabled sockets with constant l4 tuple.
UDP GRO packets can land on non GRO-enabled sockets, e.g. due to iptables NAT
rules, and that could potentially confuse existing applications.
The solution adopted here is to de-segment the GRO packet before enqueuing
as needed. Since we must cope with packet reinsertion after de-segmentation,
the relevant code is factored-out in ipv4 and ipv6 specific helpers and exposed
to UDP usage.
While the current code can probably be improved, this safeguard ,implemented in
the patches 4-7, allows future enachements to enable UDP GSO offload on more
virtual devices eventually even on forwarded packets.
The last 4 for patches implement some performance and functional self-tests,
re-using the existing udpgso infrastructure. The problematic scenario described
above is explicitly tested.
This revision of the series try to address the feedback provided by Willem and
Subash on previous iteration.
====================
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extends the existing udp programs to allow checking for proper
GRO aggregation/GSO size, and run the tests via a shell script, using
a veth pair with XDP program attached to trigger the GRO code path.
rfc v3 -> v1:
- use ip route to attach the xdp helper to the veth
rfc v2 -> rfc v3:
- add missing test program options documentation
- fix sporatic test failures (receiver faster than sender)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Run on top of veth pair, using a dummy XDP program to enable the GRO.
rfc v3 -> v1:
- use ip route to attach the xdp helper to the veth
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This trivial XDP program does nothing, but will be used by the
next patch to test the GRO path in a net namespace, leveraging
the veth XDP implementation.
It's added here, despite its 'net' usage, to avoid the duplication
of the llc-related makefile boilerplate.
rfc v3 -> v1:
- move the helper implementation into the bpf directory, don't
touch udpgso_bench_rx
rfc v2 -> rfc v3:
- move 'x' option handling here
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
And fix a couple of buglets (port option processing,
clean termination on SIGINT). This is preparatory work
for GRO tests.
rfc v2 -> rfc v3:
- use ETH_MAX_MTU
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some scenarios, the GRO engine can assemble an UDP GRO packet
that ultimately lands on a non GRO-enabled socket.
This patch tries to address the issue explicitly checking for the UDP
socket features before enqueuing the packet, and eventually segmenting
the unexpected GRO packet, as needed.
We must also cope with re-insertion requests: after segmentation the
UDP code calls the helper introduced by the previous patches, as needed.
Segmentation is performed by a common helper, which takes care of
updating socket and protocol stats is case of failure.
rfc v3 -> v1
- fix compile issues with rxrpc
- when gso_segment returns NULL, treat is as an error
- added 'ipv4' argument to udp_rcv_segment()
rfc v2 -> rfc v3
- moved udp_rcv_segment() into net/udp.h, account errors to socket
and ns, always return NULL or segs list
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
So that we can re-use it at the UDP level in the next patch
rfc v3 -> v1:
- add the helper declaration into the ipv6 header
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
So that we can re-use it at the UDP level in a later patch
rfc v3 -> v1
- add the helper declaration into the ip header
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When UDP GRO is enabled, the UDP_GRO cmsg will carry the ingress
datagram size. User-space can use such info to compute the original
packets layout.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the RX counterpart of commit bec1f6f697 ("udp: generate gso
with UDP_SEGMENT"). When UDP_GRO is enabled, such socket is also
eligible for GRO in the rx path: UDP segments directed to such socket
are assembled into a larger GSO_UDP_L4 packet.
The core UDP GRO support is enabled with setsockopt(UDP_GRO).
Initial benchmark numbers:
Before:
udp rx: 1079 MB/s 769065 calls/s
After:
udp rx: 1466 MB/s 24877 calls/s
This change introduces a side effect in respect to UDP tunnels:
after a UDP tunnel creation, now the kernel performs a lookup per ingress
UDP packet, while before such lookup happened only if the ingress packet
carried a valid internal header csum.
rfc v2 -> rfc v3:
- fixed typos in macro name and comments
- really enforce UDP_GRO_CNT_MAX, instead of UDP_GRO_CNT_MAX + 1
- acquire socket lock in UDP_GRO setsockopt
rfc v1 -> rfc v2:
- use a new option to enable UDP GRO
- use static keys to protect the UDP GRO socket lookup
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The *encap_needed static keys are enabled by UDP tunnels
and several UDP encapsulations type, but they are never
turned off. This can cause unneeded overall performance
degradation for systems where such features are used
transiently.
This patch introduces complete book-keeping for such keys,
decreasing the usage at socket destruction time, if needed,
and avoiding that the same socket could increase the key
usage multiple times.
rfc v3 -> v1:
- add socket lock around udp_tunnel_encap_enable()
rfc v2 -> rfc v3:
- use udp_tunnel_encap_enable() in setsockopt()
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mike Manning says:
====================
vrf: allow simultaneous service instances in default and other VRFs
Services currently have to be VRF-aware if they are using an unbound
socket. One cannot have multiple service instances running in the
default and other VRFs for services that are not VRF-aware and listen
on an unbound socket. This is because there is no easy way of isolating
packets received in the default VRF from those arriving in other VRFs.
This series provides this isolation for stream sockets subject to the
existing kernel parameter net.ipv4.tcp_l3mdev_accept not being set,
given that this is documented as allowing a single service instance to
work across all VRF domains. Similarly, net.ipv4.udp_l3mdev_accept is
checked for datagram sockets, and net.ipv4.raw_l3mdev_accept is
introduced for raw sockets. The functionality applies to UDP & TCP
services as well as those using raw sockets, and is for IPv4 and IPv6.
Example of running ssh instances in default and blue VRF:
$ /usr/sbin/sshd -D
$ ip vrf exec vrf-blue /usr/sbin/sshd
$ ss -ta | egrep 'State|ssh'
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 128 0.0.0.0%vrf-blue:ssh 0.0.0.0:*
LISTEN 0 128 0.0.0.0:ssh 0.0.0.0:*
ESTAB 0 0 192.168.122.220:ssh 192.168.122.1:50282
LISTEN 0 128 [::]%vrf-blue:ssh [::]:*
LISTEN 0 128 [::]:ssh [::]:*
ESTAB 0 0 [3000::2]%vrf-blue:ssh [3000::9]:45896
ESTAB 0 0 [2000::2]:ssh [2000::9]:46398
v1:
- Address Paolo Abeni's comments (patch 4/5)
- Fix build when CONFIG_NET_L3_MASTER_DEV not defined (patch 1/5)
v2:
- Address David Aherns' comments (patches 4/5 and 5/5)
- Remove patches 3/5 and 5/5 from series for individual submissions
- Include a sysctl for raw sockets as recommended by David Ahern
- Expand series into 10 patches and provide improved descriptions
v3:
- Update description for patch 1/10 and remove patch 6/10
v4:
- Set default to enabled for raw socket sysctl as recommended by David Ahern
v5:
- Address review comments from David Ahern in patches 2-5
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
For bound udp sockets in a vrf, also check the sdif to get the index
for ingress devices enslaved to an l3mdev.
Signed-off-by: Dewi Morgan <morgand@vyatta.att-mail.com>
Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the skb for multicast packets marked as enslaved to a VRF are
received, then the secondary device index should be used to obtain
the real device. And verify the multicast address against the
enslaved rather than the l3mdev device.
Signed-off-by: Dewi Morgan <morgand@vyatta.att-mail.com>
Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If link-local packets are marked as enslaved to a VRF, then to allow
ping to the link-local from a vrf, the error handling for IPV6_PKTINFO
needs to be relaxed to also allow the pkt ipi6_ifindex to be that of a
slave device to the vrf.
Note that the real device also needs to be retrieved in icmp6_iif()
to set the ipv6 flow oif to this for icmp echo reply handling. The
recent commit 24b711edfc ("net/ipv6: Fix linklocal to global address
with VRF") takes care of this, so the sdif does not need checking here.
This fix makes ping to link-local consistent with that to global
addresses, in that this can now be done from within the same VRF that
the address is in.
Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The skb for packets that are multicast or to a link-local address are
not marked as being enslaved to a VRF, if they are received on a socket
bound to the VRF. This is needed for ND and it is preferable for the
kernel not to have to deal with the additional use-cases if ll or mcast
packets are handled as enslaved. However, this does not allow service
instances listening on unbound and bound to VRF sockets to distinguish
the VRF used, if packets are sent as multicast or to a link-local
address. The fix is for the VRF driver to also mark these skb as being
enslaved to the VRF.
Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
