The newly added code fails to build when either SECMARK or
NETFILTER are disabled:
security/apparmor/lsm.c: In function 'apparmor_socket_sock_rcv_skb':
security/apparmor/lsm.c:1138:12: error: 'struct sk_buff' has no member named 'secmark'; did you mean 'mark'?
security/apparmor/lsm.c:1671:21: error: 'struct nf_hook_state' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
Add a set of #ifdef checks around it to only enable the code that
we can compile and that makes sense in that configuration.
Fixes: ab9f211508 ("apparmor: Allow filtering based on secmark policy")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Remove "manual" table of contents and leave only the ReST tag so that
Sphinx will take care of TOC generation.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Some platforms may use a single device tree to describe two address
spaces, as described in d9f43babb9 ("Documentation: dt: Add bindings
for Secure-only devices"). For these platforms it makes sense to define
a secure counterpart of /chosen, namely: /secure-chosen. This new node
is meant to be used by the secure firmware to pass data to the secure
OS. Only the stdout-path property is supported for now.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Julian Wiedmann says:
====================
s390/qeth: updates 2018-10-12
please apply one more patchset for net-next. This extends the TSO support
in qeth.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Except for the new HW header id, this works just like TSO6 on L3 devices
and reuses all the existing data path support in qeth_xmit().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds TSO6 support for L3 qeth devices.
Just like for standard IPv6 traffic, TSO6 doesn't use IP offload and
thus runs over the normal qeth_xmit() path.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TSO6 requires the full programming sequence, and not just a simple
START command. This implements the additional ENABLE command, and adds
some sanity checks that were missing for the START command.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for IPv6 TSO, turn the protocol version into a parameter
for the TSO control code.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil Mehta says:
====================
Fixes & small enhancements related to the promisc mode in HNS3
This patch-set presents some fixes and enhancements related to promiscuous
mode and MAC VLAN Table full condition in HNS3 Ethernet Driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch resumes promisc mode and vlan filter status after
loopback test.
Fixes: 3b75c3df59 ("net: hns3: net: hns3: Add support for IFF_ALLMULTI flag")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch resumes promisc mode and vlan filter status after reset.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the driver does nothing when mac vlan table is full.
In this case, the packet with new mac address will be dropped
by hardware. This patch adds check for the result of sync mac
address, and enable promisc mode when mac vlan table is full.
Furtherly, disable vlan filter when enable promisc by user
command.
Fixes: 46a3df9f97 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We already have BUILD_BUG_ON_ZERO() which I just hadn't found
before, so we should use it here instead of open-coding another
implementation thereof.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* merge net-next, so I can finish the hwsim workqueue removal
* fix TXQ NULL pointer issue that was reported multiple times
* minstrel cleanups from Felix
* simplify lib80211 code by not using skcipher, note that this
will conflict with the crypto tree (and this new code here
should be used)
* use new netlink policy validation in nl80211
* fix up SAE (part of WPA3) in client-mode
* FTM responder support in the stack
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAlvAgX8ACgkQB8qZga/f
l8Sg6A/+IhbIRerfje8kVIWNG3fUa5oF/vXYRfNRDeNwHu6OVYer5uj6bonkSSoU
lpWivhuF1XxdIQx6npr8j7R6bw8sbKMKrpnR7ObFaaCmxjmjgMNY4pkkmzSRv3zi
LP91woUQ2mFv16U9E+9HROBJXgeZfU96bBBR4mfqKrhnhFz6O8SYa9JvRpylcLTz
HY+a+ezIztbrCPImBUOkSfUPuoeWSJ8Y4LN2zhqbY/ZUk3n4iFOD44bAN346u3+q
CzfL+e+PKjuSiwPrjrKMIp9emiAE1zeWPUcmnSAYU/s9zISoZ8v5L/kSBanVnvJI
DIHJ6LB+aETm1gnj1dSnboXRKpUaW63nbkoxwTy15JrdIMysh9vDaXWok6p85mDq
FVbFx1MzBcYPCMrACEBhhRz71eZHFtyrGyqUm1EZcdcNeQtg+eJdXvhTiowg5JhH
Csl+ZloZfqrd0aPjaM3F819aVMKcJORdQhrfTN+GYW81mdZyZO3VWmzd3kI8Pjuc
WRZmykYTub/MbDFjE5g1LRJ4jZ/bThIl71i8hYEopqfim9URE1RPm9mSMUv9ggVL
/xNIIMhw3H/+P3g0z2a0Z06hT/dScHsZ9If5Srb699/NUOiES5zl43eXidBzuAbI
36DHaHhf6k8/e3aaLOS1oD3AjpiW28uxq7baeLfd1B8l9WmmgZM=
=RqMD
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-davem-2018-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Highlights:
* merge net-next, so I can finish the hwsim workqueue removal
* fix TXQ NULL pointer issue that was reported multiple times
* minstrel cleanups from Felix
* simplify lib80211 code by not using skcipher, note that this
will conflict with the crypto tree (and this new code here
should be used)
* use new netlink policy validation in nl80211
* fix up SAE (part of WPA3) in client-mode
* FTM responder support in the stack
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Update Static Power Gate mode UVD status clear
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set VCPU busy after gate power during vcn Static Power Gate start
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apply new UMC enable for VNC Dynamic Power Gate mode
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove Sitatic Power Gate mode unused steps during vcn start
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Static Power Gate mode Register XX check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move Static Power Gate mode mc resume after MPC control
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update Static Power Gate mode VCN global tiling
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update Static Power Gate mode VCN memory control
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apply new UMC enable for VNC Dynamic Power Gate mode start
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove Dynamic Power Gate mode unused steps during VCN start
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Dynamic Power Gate mode Register XX check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update Dynamic Power Gate mode VCN global tiling registers
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update Dynamic Power Gate mode VCN memory control
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reduce unnecessary local variable.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ring write/read pointer check for VCN dynamic power gate mode
stop,to make sure that no job is left in ring before turn off DPG mode.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update latest static power gate mode stop function for VCN
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update latest UVD_MPC register for VCN. Use defined
macro to replace value for readability.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new register offset/mask for VCN to support
latest VCN implementation.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY] dp debugfs file does not exist for eDP under
/sys/kernel/debug/dri/0/eDP-1. the root is phy debugfs
is created for dp connector only.
[HOW] for eDP connector, create phy debugfs too.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For sriov, when first run windows guest, then run linux guest, the gds
vmid0 size will be reset to 0 by windows guest. So if the value has been
reset to 0, then set the value to the default value in linux guest.
v2:
Fixed value instead of reading mmGDS_VMID0_SIZE.
v3:
Set the default value of the switch.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to make sure that we don't race between job completion and
timeout.
v2: put revert label after calling the handling manually
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cleanup starting the timeout a bit.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When converting from text to rst, the kobjects section and its sole
subsection about device tree nodes were coalesced into a single section,
yielding an inconsistent result.
Remove all references to kobjects, as
1. Device tree object pointers are not compatible to kobject pointers
(the former may embed the latter, though), and
2. there are no printk formats defined for kobject types.
Update the vsprintf() source code comments to match the above.
Fixes: b3ed23213e ("doc: convert printk-formats.txt to rst")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The existing wording implies that the use of spin_unlock whilst irqs are
disabled might trigger a reschedule. However the preemptible() test in
preempt_schedule will prevent a reschedule if irqs are disabled.
Lets improve the clarity of this wording to change the example from
spin_unlock to cond_resched() and cond_resched_lock() as these are
functions that will trigger a reschedule if the preempt count is 0 without
testing that irqs are disabled.
Also remove the 'Last Updated' line as this is not up to date and better
tracked via GIT.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
It is important to clear the hw->state value for non-stopped events
when they are added into the PMU. Otherwise when the event is
scheduled out, we won't read the counter because HES_UPTODATE is still
set. This breaks 'perf stat' and similar use cases, causing all the
events to show zero.
This worked for multi-pcr because we make explicit sparc_pmu_start()
calls in calculate_multiple_pcrs(). calculate_single_pcr() doesn't do
this because the idea there is to accumulate all of the counter
settings into the single pcr value. So we have to add explicit
hw->state handling there.
Like x86, we use the PERF_HES_ARCH bit to track truly stopped events
so that we don't accidently start them on a reload.
Related to all of this, sparc_pmu_start() is missing a userpage update
so add it.
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit ef548c551e ("dm flakey: introduce "error_writes" feature")
added the ability to dm flakey to error out writes in contrast to
silently dropping it with 'drop_writes'. Unfortunately this feature
is not currently documented and one has to be either familiar with the
source code of dm flakey or check out xfstests sources to know of
this parameter. So document it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This patch fixes a couple of punctuation nits which can make the document
more correct and readable.
Also missing "()" are added to some function references for consistency.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add the full text of the ISC license to the kernel tree. It was copied
directly from:
https://spdx.org/licenses/ISC.html
With the mention of "ISC" in the warranty disclaimer replaced with
"THE AUTHOR" as done in the ISC license headers used in the ath10k and
brcmfmac wifi drivers.
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The only reason we have the CDDL-1.0 license text around is for some
dual-licensed files from virtualbox. New code should not use this license.
Add a note about this and change the example tag to be dual-licensed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Give user some hints when the power profile setting is not supported.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correctly translate the power profile specified by user to workload
type accepted by SMU fw.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds an option to have per-port vlan stats instead of the
default global stats. The option can be set only when there are no port
vlans in the bridge since we need to allocate the stats if it is set
when vlans are being added to ports (and respectively free them
when being deleted). Also bump RTNL_MAX_TYPE as the bridge is the
largest user of options. The current stats design allows us to add
these without any changes to the fast-path, it all comes down to
the per-vlan stats pointer which, if this option is enabled, will
be allocated for each port vlan instead of using the global bridge-wide
one.
CC: bridge@lists.linux-foundation.org
CC: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Let's document the magic a bit, especially why device_hotplug_lock is
required when adding/removing memory and how it all play together with
requests to online/offline memory from user space.
[ rppt: moved the text to Documentation/core-api/memory-hotplug.rst ]
Link: http://lkml.kernel.org/r/20180925091457.28651-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
to allow additions of new documentation about memory hotplug under the same
roof.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>