Commit graph

932,869 commits

Author SHA1 Message Date
José Roberto de Souza
3a465b84ea drm/i915/psr: Remove alpm from i915_psr
ALPM is a requirement and we don't need to keep it's cached, what
were done in commit 97c9de66ca
("drm/i915/psr: Fix ALPM cap check for PSR2") but the alpm was not
removed from i915_psr.

Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003205031.32474-7-jose.souza@intel.com
2018-10-05 16:11:16 -07:00
Greg Kroah-Hartman
5943a9bbbb pci-v4.19-fixes-3
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlu3zDkUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vxnHA/7BrOMAbvRkC9p4dDVM9y+kx9cyBB3
 B6Pq2o7G/2740frHrCx5wJkgh4VSXJF8PI8N6eBmpvUylcm6sNLHrEYq5Ui/QSdo
 /Q2CP+4bWZHTjRGLdOTJ4NYzCPA2NGvFsY78B8W/qaPSYoik/7FJ1Pg8diZA1TG6
 +HA4IIv/QeBPgGTYVtSBKirSdbapDCaa1g/XYPTKp8kWdB/KWmRZ1tkjk1Lds7Fd
 alYa/HIHowAsFwJg+yNh8PgVLz5IAuygeP098qTKxYvGgai5zKF1YorU/7bewJWx
 S/IyIa+/uPHGDgHrU+6foYrivehtqeqdZ4SENAE4zUX5J5xkdH1woYXvOBAGt6/N
 sv2KClNX1cCSBRfyyV1QO/ti0RfGUOl709NQyHDWVe23cqb1Qyi9nVT9DIgIwrbe
 v6+i10AfBMKMFXm7uit5y7sIykd8cYbK6EokDpHd87V72qYUU8VNYcmcOIMDj4LY
 fReC4COWCLiNf2pkYawfex1u+3mCOBr52ShlxzVVZ4+7/ft6kcKsPJnA34Ew/sue
 xdb35nyRdgh0P9M+jtExVyMsesauPAi0a9p7AI2DElOr6qo2vkxniiLXEalD5UQ6
 MTYUqm4LnV2ECnidabtPsyqR+77KRlQIB4lhYkqtTWLgIfj48Oaii50KP7K48ZxR
 9kc70QSxH5FtR3g=
 =0P87
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.19-fixes-3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Bjorn writes:
  "PCI fixes for v4.19:

   - Reprogram bridge prefetch registers to fix NVIDIA and Radeon issues
     after suspend/resume (Daniel Drake)

   - Fix mvebu I/O mapping creation sequence (Thomas Petazzoni)

   - Fix minor MAINTAINERS file match issue (Bjorn Helgaas)"

* tag 'pci-v4.19-fixes-3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: mvebu: Fix PCI I/O mapping creation sequence
  MAINTAINERS: Remove obsolete drivers/pci pattern from ACPI section
  PCI: Reprogram bridge prefetch registers on resume
2018-10-05 16:11:16 -07:00
José Roberto de Souza
66231d14e7 drm/i915/psr: Use WA to force HW tracking to exit PSR2
This WA also works fine for PSR2, triggering a selective update when
possible.

Acked-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003205031.32474-4-jose.souza@intel.com
2018-10-05 16:11:08 -07:00
José Roberto de Souza
4755717b0c drm/i915/psr: Remove PSR2 TODO error handling
We are already handling all PSR2 errors, so we can drop this TODO.

Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003205031.32474-3-jose.souza@intel.com
2018-10-05 16:11:01 -07:00
José Roberto de Souza
fc6ff9dc9e drm/i915/psr: Make MASK_DISP_REG_WRITE reserved in PSR_MASK for ICL
ICL spec states that this bit is now reserved.

Bspec: 7722

v2(Dhinakaran and Jani):
- instead of remove bit in gen11 now only setting if if gen < 11
- changed commit title

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003205031.32474-2-jose.souza@intel.com
2018-10-05 16:10:52 -07:00
José Roberto de Souza
bf80928fbf drm/i915/psr: Share PSR and PSR2 exit mask
Now both PSR and PSR2 have the same exit mask, so let's share then
instead of have the same code 2 times.

Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003205031.32474-1-jose.souza@intel.com
2018-10-05 16:10:12 -07:00
Greg Kroah-Hartman
b98d6cb80b - Fix a DM thinp __udivdi3 undefined on 32-bit bug introduced during
4.19 merge window.
 
 - Fix leak and dangling pointer in DM multipath's scsi_dh related code.
 
 - A couple stable@ fixes for DM cache's resize support.
 
 - A DM raid fix to remove "const" from decipher_sync_action()'s return
   type.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJbt7RQAAoJEMUj8QotnQNac2MIAK0p2Ndy7ErItA+qIlmBodsO
 juWGdnhBXTHQ9qoeIuamqA66g7LZ8oxnaiIQX8tqzt+GyzxgcjH+9C+Nn7qf8VLF
 4SkbI8/8CxBKmsKv5G5OI2tCfdfTXop9rOTg+3tF6BcTxXzPGeY+5mImsMN4KI/S
 1+hnq2xMtScdTDLyN0qKxs0+e8YdP7IJn2QAscLVNik0wdWn+7Hfp7Hg7tXcupyF
 WQ1dkY8kaGCUid167jAkCmY4etXHIfAb81EWxFtGb/GNGlFmc57t7HGa5mVaO3qv
 QXgp9u27q7v/wqzDHO68+mzAfiBHMFmJHa4uRg7gR1LrE9/0y3CDWC3zMYDL3Es=
 =Av3x
 -----END PGP SIGNATURE-----

Merge tag 'for-4.19/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Mike writes:
  "device mapper fixes

   - Fix a DM thinp __udivdi3 undefined on 32-bit bug introduced during
     4.19 merge window.

   - Fix leak and dangling pointer in DM multipath's scsi_dh related code.

   - A couple stable@ fixes for DM cache's resize support.

   - A DM raid fix to remove "const" from decipher_sync_action()'s return
     type."

* tag 'for-4.19/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache: fix resize crash if user doesn't reload cache table
  dm cache metadata: ignore hints array being too small during resize
  dm raid: remove bogus const from decipher_sync_action() return type
  dm mpath: fix attached_handler_name leak and dangling hw_handler_name pointer
  dm thin metadata: fix __udivdi3 undefined on 32-bit
2018-10-05 16:09:56 -07:00
Greg Kroah-Hartman
3830711f3e A single GPIO fix:
Free the last used descriptor, an off by one error.
 This is tagged for stable as well.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJbt0SyAAoJEEEQszewGV1zv/4P/RMh6vgvl9Cl3YSuYCIxv0V8
 MzSeSdCcbo3WPV2YOtzfwuTfsa00TmHsUaAJ3tBidNxv/UElb041MJYhCHu2BKzl
 UXs3M1iK7CSt5hoeXSPTRjdoR/W0pBRI3iFTKkrkqCG+0aFxoE3HCmy6QVmLKfgB
 kajgmLrKCKq0CfT9xgbrw7Jm/qdauCceuH7rdOGplA8zc8Ply66jwagTPmD3lrGd
 RFCU7NPWJK+3SDj8f62/sr4Qvi1PghugDOOlzwbDp3ZSpzsLWxAqFaK2N1ae1UT5
 0RPbLEsVTcBsqYpVpVEwlwASkRu+vIUqRFkcUobOCcIU998R54H3PLI1G9XDPpkM
 i1LJPJY/Nm6I5jqU6Nguw4siimoMPFdklzleFrEPXV5GJibTGWgGwFItz4FL44SJ
 4jGop6Tl7E+H+lQ9mAbp5/oNm3JpgzU5wTTjRN1IHlkprLe0umcFyEO0PioKGGe2
 Rd4OeCpSd3ELTXCS9X9EGbKqamdybocjdJX9AA9qp0s+zshk9tIO4nzahRSzEtJi
 t2ClCfN6ApTNgpUiavfPrGGYub7XOf4IJlBk/7hQ238wn0uwuDO5FzTUQs/UUfXf
 ++RtTMQkv0MVH5smY4g6zcDY2xkZHOk+tc2G5V9uipGOdc2s0exk7tBWeZgTXt33
 0hc9Hv42j5hf/b7aApBm
 =PKfb
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Linus writes:
  "A single GPIO fix:
   Free the last used descriptor, an off by one error.
   This is tagged for stable as well."

* tag 'gpio-v4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpiolib: Free the last requested descriptor
2018-10-05 16:09:11 -07:00
Greg Kroah-Hartman
5aebc7d278 Power management fix for 4.19-rc7
Fix a bug that may cause runtime PM to misbehave for some devices
 after a failing or aborted system suspend which is nasty enough for
 an -rc7 time frame fix.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJbtzD9AAoJEILEb/54YlRxRCEP/jBooTFH6SKEY0EIvzpda6yV
 Pi3q8sMkcGJMm8/HRqRqpg6N03eUK/2sdoqQf2fRDoJfWa/NcZ3Vcq9gElN8JSgp
 vTYUYVANsD+je8NbWyV6WrwGRedlebw4nkeS+/uAbpEPwKNJv94H0YZ71JVZa/lE
 Mx6C+gClepKz3So4JKcfn0NNyLlAl6iCJOB/8WRHZIj17WJBsMSV+I4mfjexlbQD
 AloPeVYtsGSSsi/Y0aKbjcpE1i49zlFoS6Vqj4rfkXqbwGEaFEoQutIviO+hYsH6
 3DDUtoCF3w0haJJNaeAbB2XB+uVeIzxp4N5eq9mEWwZhKwkm37NsDWmV6D1oCQXl
 2nhDmj2gCypMRQr3/QvAareW3FxHrJqyEEcgnSdM7EX0Sc3EmXZF5T8teGUtZP2s
 w8byBKnTbvER9X6THZajlYym0owR5LybjXAtvb2Y9s5KCauw9Dw6n14dlPnZAHQo
 O5eqcDnQaQhfznU+ngYFa8RBdKKJPbORrma0yKRhs5S8CvdQci2nx4cwkaHw/pPR
 GSSV6yrL5ogEPLISXvITrg0iglHizxPonbzcEcfKljEd1+2Ai/oJZpM90BveaOvV
 t1IBY3eHFefW4tZnToS4fRy/WtamPIqOXFuIrnbU4KKeQWv7Yreb2NbPmM/okzr6
 SxKdPMUUmeyI2jxA03r2
 =wko2
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Rafael writes:
  "Power management fix for 4.19-rc7

   Fix a bug that may cause runtime PM to misbehave for some devices
   after a failing or aborted system suspend which is nasty enough for
   an -rc7 time frame fix."

* tag 'pm-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / core: Clear the direct_complete flag on errors
2018-10-05 16:08:12 -07:00
Greg Kroah-Hartman
31d099085d Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Ingo writes:
  "perf fixes:
    - fix a CPU#0 hot unplug bug and a PCI enumeration bug in the x86 Intel uncore PMU driver
    - fix a CPU event enumeration bug in the x86 AMD PMU driver
    - fix a perf ring-buffer corruption bug when using tracepoints
    - fix a PMU unregister locking bug"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/amd/uncore: Set ThreadMask and SliceMask for L3 Cache perf events
  perf/x86/intel/uncore: Fix PCI BDF address of M3UPI on SKX
  perf/ring_buffer: Prevent concurent ring buffer access
  perf/x86/intel/uncore: Use boot_cpu_data.phys_proc_id instead of hardcorded physical package ID 0
  perf/core: Fix perf_pmu_unregister() locking
2018-10-05 16:07:13 -07:00
Jan Kara
ccd3c4373e jbd2: fix use after free in jbd2_log_do_checkpoint()
The code cleaning transaction's lists of checkpoint buffers has a bug
where it increases bh refcount only after releasing
journal->j_list_lock. Thus the following race is possible:

CPU0					CPU1
jbd2_log_do_checkpoint()
					jbd2_journal_try_to_free_buffers()
					  __journal_try_to_free_buffer(bh)
  ...
  while (transaction->t_checkpoint_io_list)
  ...
    if (buffer_locked(bh)) {

<-- IO completes now, buffer gets unlocked -->

      spin_unlock(&journal->j_list_lock);
					    spin_lock(&journal->j_list_lock);
					    __jbd2_journal_remove_checkpoint(jh);
					    spin_unlock(&journal->j_list_lock);
					  try_to_free_buffers(page);
      get_bh(bh) <-- accesses freed bh

Fix the problem by grabbing bh reference before unlocking
journal->j_list_lock.

Fixes: dc6e8d669c ("jbd2: don't call get_bh() before calling __jbd2_journal_remove_checkpoint()")
Fixes: be1158cc61 ("jbd2: fold __process_buffer() into jbd2_log_do_checkpoint()")
Reported-by: syzbot+7f4a27091759e2fe7453@syzkaller.appspotmail.com
CC: stable@vger.kernel.org
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-10-05 18:44:40 -04:00
Greg Kroah-Hartman
247373b5dd Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Ingo writes:
  "x86 fixes:

   Misc fixes:

    - fix various vDSO bugs: asm constraints and retpolines
    - add vDSO test units to make sure they never re-appear
    - fix UV platform TSC initialization bug
    - fix build warning on Clang"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Fix vDSO syscall fallback asm constraint regression
  x86/cpu/amd: Remove unnecessary parentheses
  x86/vdso: Only enable vDSO retpolines when enabled and supported
  x86/tsc: Fix UV TSC initialization
  x86/platform/uv: Provide is_early_uv_system()
  selftests/x86: Add clock_gettime() tests to test_vdso
  x86/vdso: Fix asm constraints on vDSO syscall fallbacks
2018-10-05 15:40:57 -07:00
Greg Kroah-Hartman
8be673735e Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Ingo writes:
  "scheduler fixes:

   These fixes address a rather involved performance regression between
   v4.17->v4.19 in the sched/numa auto-balancing code. Since distros
   really need this fix we accelerated it to sched/urgent for a faster
   upstream merge.

   NUMA scheduling and balancing performance is now largely back to
   v4.17 levels, without reintroducing the NUMA placement bugs that
   v4.18 and v4.19 fixed.

   Many thanks to Srikar Dronamraju, Mel Gorman and Jirka Hladky, for
   reporting, testing, re-testing and solving this rather complex set of
   bugs."

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/numa: Migrate pages to local nodes quicker early in the lifetime of a task
  mm, sched/numa: Remove rate-limiting of automatic NUMA balancing migration
  sched/numa: Avoid task migration for small NUMA improvement
  mm/migrate: Use spin_trylock() while resetting rate limit
  sched/numa: Limit the conditions where scan period is reset
  sched/numa: Reset scan rate whenever task moves across nodes
  sched/numa: Pass destination CPU as a parameter to migrate_task_rq
  sched/numa: Stop multiple tasks from moving to the CPU at the same time
2018-10-05 15:39:38 -07:00
Greg Kroah-Hartman
1df377db3d Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Ingo writes:
  "locking fixes:

   A fix in the ww_mutex self-test that produces a scary splat, plus an
   updates to the maintained-filed patters in MAINTAINER."

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/ww_mutex: Fix runtime warning in the WW mutex selftest
  MAINTAINERS: Remove dead path from LOCKING PRIMITIVES entry
2018-10-05 15:38:32 -07:00
Greg Kroah-Hartman
8b6b383c1f sound fixes for 4.19-rc7
Just two small fixes for HD-audio: one is for a typo in completion
 timeout, and another a fixup for Dell machines as usual
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAlu3M6IOHHRpd2FpQHN1
 c2UuZGUACgkQLtJE4w1nLE+dqw//Q2vhKIZyBOjEKiDjZDwYrTYQpG9dxp6SpY5b
 bWLZt7XkHKCLLSD7EIg8c5bTR5IpeQd6nD06chw4FZ9L9XgrGLudvtECjhoz2Nlp
 WvAyqtLnt/nBAJHt5tS2oOJlxMHw4loW6MfBH8da9PT1DgdLx/ZB6c1MMdBFYAFb
 pLEJIv+9Sb4Ei/7GZlJq0yUhKBGTvjJgntvVxd0/VPUPAi5v0QwwioLOcI0yF88p
 4nvnl7htLXqSW8+sybXUa+HqCOYjzh8rfqM+P3FxcLuogHkL7OuLzbn2aui3FNL+
 qlU21xWJSqexCrdEXQ7Z90RZSuovNh8IzV4dKeiV8Om7ajXEQDY0oTRSWoSsl9sB
 2XVKI6GF2zg+3qj48mUSXzRb8ZF95FZtv5kG20Wtfbs5nhVBqEO5vPuB/tmXD6xn
 j6P5atq7MRl0TpJC1+N9e6Xb5MO/v/iWnFZGPzwqec18tpMQUTFUK23hr2ZrVv3h
 2e8e2hJxymdPIDX3nQPzwF5vjGgzE8rvFi5oJIqClu51HWj8xT8lT1sP1tLgOtHM
 g0jBY1WiSQ2p8x+a63Ce0agh6umuPpGrhqtmrBLsi7+uZA/FUO6dayfIHVoXwMMx
 MRx/zxt8ADyMwTByH0FyVvMDORHfa40XlDQExUIZkRRMt7gUrM3wNGdY9L3cejKB
 /SOsxK4=
 =fjND
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Takashi writes:
  "sound fixes for 4.19-rc7

   Just two small fixes for HD-audio: one is for a typo in completion
   timeout, and another a fixup for Dell machines as usual"

* tag 'sound-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Cannot adjust speaker's volume on Dell XPS 27 7760
  ALSA: hda: Fix the audio-component completion timeout
2018-10-05 15:37:22 -07:00
Leon Romanovsky
ed7a01fd3f RDMA/restrack: Release task struct which was hold by CM_ID object
Tracking CM_ID resource is performed in two stages: creation of cm_id
and connecting it to the cma_dev. It is needed because rdma-cm protocol
exports two separate user-visible calls rdma_create_id and rdma_accept.

At the time of CM_ID creation, the real owner of that object is unknown
yet and we need to grab task_struct. This task_struct is released or
reassigned in attach phase later on. but call to rdma_destroy_id left
this task_struct unreleased.

Such separation is unique to CM_ID and other restrack objects initialize
in one shot. It means that it is safe to use "res->valid" check to catch
unfinished CM_ID flow and release task_struct for that object.

Fixes: 00313983cd ("RDMA/nldev: provide detailed CM_ID information")
Reported-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yossi Itigin <yosefe@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-05 16:07:39 -06:00
Leon Romanovsky
2165fc2640 RDMA/restrack: Consolidate task name updates in one place
Unify task update and kernel name set in one place.

Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yossi Itigin <yosefe@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-05 16:07:39 -06:00
Leon Romanovsky
363ad35577 RDMA/restrack: Un-inline set task implementation
Prepare rdma_restrack_set_task() call to accommodate more
code by moving its implementation from *.h to *.c.

Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yossi Itigin <yosefe@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-05 16:07:39 -06:00
Vijay Khemka
fb4ee67529 net/ncsi: Add NCSI OEM command support
This patch adds OEM commands and response handling. It also defines OEM
command and response structure as per NCSI specification along with its
handlers.

ncsi_cmd_handler_oem: This is a generic command request handler for OEM
commands
ncsi_rsp_handler_oem: This is a generic response handler for OEM commands

Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Reviewed-by: Justin Lee <justin.lee1@dell.com>
Reviewed-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:54:47 -07:00
Jakub Sitnicki
6f8474922b selftests: net: Clean up an unused variable
Address compiler warning:

ip_defrag.c: In function 'send_udp_frags':
ip_defrag.c:206:16: warning: unused variable 'udphdr' [-Wunused-variable]
  struct udphdr udphdr;
                ^~~~~~

Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:53:44 -07:00
Maxime Chevallier
35f3625c21 net: mvpp2: Extract the correct ethtype from the skb for tx csum offload
When offloading the L3 and L4 csum computation on TX, we need to extract
the l3_proto from the ethtype, independently of the presence of a vlan
tag.

The actual driver uses skb->protocol as-is, resulting in packets with
the wrong L4 checksum being sent when there's a vlan tag in the packet
header and checksum offloading is enabled.

This commit makes use of vlan_protocol_get() to get the correct ethtype
regardless the presence of a vlan tag.

Fixes: 3f518509de ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:52:43 -07:00
Wei Wang
a688caa34b ipv6: take rcu lock in rawv6_send_hdrinc()
In rawv6_send_hdrinc(), in order to avoid an extra dst_hold(), we
directly assign the dst to skb and set passed in dst to NULL to avoid
double free.
However, in error case, we free skb and then do stats update with the
dst pointer passed in. This causes use-after-free on the dst.
Fix it by taking rcu read lock right before dst could get released to
make sure dst does not get freed until the stats update is done.
Note: we don't have this issue in ipv4 cause dst is not used for stats
update in v4.

Syzkaller reported following crash:
BUG: KASAN: use-after-free in rawv6_send_hdrinc net/ipv6/raw.c:692 [inline]
BUG: KASAN: use-after-free in rawv6_sendmsg+0x4421/0x4630 net/ipv6/raw.c:921
Read of size 8 at addr ffff8801d95ba730 by task syz-executor0/32088

CPU: 1 PID: 32088 Comm: syz-executor0 Not tainted 4.19.0-rc2+ #93
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c4/0x2b4 lib/dump_stack.c:113
 print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
 rawv6_send_hdrinc net/ipv6/raw.c:692 [inline]
 rawv6_sendmsg+0x4421/0x4630 net/ipv6/raw.c:921
 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:631
 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2114
 __sys_sendmsg+0x11d/0x280 net/socket.c:2152
 __do_sys_sendmsg net/socket.c:2161 [inline]
 __se_sys_sendmsg net/socket.c:2159 [inline]
 __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2159
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457099
Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f83756edc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f83756ee6d4 RCX: 0000000000457099
RDX: 0000000000000000 RSI: 0000000020003840 RDI: 0000000000000004
RBP: 00000000009300a0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000004d4b30 R14: 00000000004c90b1 R15: 0000000000000000

Allocated by task 32088:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553
 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490
 kmem_cache_alloc+0x12e/0x730 mm/slab.c:3554
 dst_alloc+0xbb/0x1d0 net/core/dst.c:105
 ip6_dst_alloc+0x35/0xa0 net/ipv6/route.c:353
 ip6_rt_cache_alloc+0x247/0x7b0 net/ipv6/route.c:1186
 ip6_pol_route+0x8f8/0xd90 net/ipv6/route.c:1895
 ip6_pol_route_output+0x54/0x70 net/ipv6/route.c:2093
 fib6_rule_lookup+0x277/0x860 net/ipv6/fib6_rules.c:122
 ip6_route_output_flags+0x2c5/0x350 net/ipv6/route.c:2121
 ip6_route_output include/net/ip6_route.h:88 [inline]
 ip6_dst_lookup_tail+0xe27/0x1d60 net/ipv6/ip6_output.c:951
 ip6_dst_lookup_flow+0xc8/0x270 net/ipv6/ip6_output.c:1079
 rawv6_sendmsg+0x12d9/0x4630 net/ipv6/raw.c:905
 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:631
 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2114
 __sys_sendmsg+0x11d/0x280 net/socket.c:2152
 __do_sys_sendmsg net/socket.c:2161 [inline]
 __se_sys_sendmsg net/socket.c:2159 [inline]
 __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2159
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 5356:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521
 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
 __cache_free mm/slab.c:3498 [inline]
 kmem_cache_free+0x83/0x290 mm/slab.c:3756
 dst_destroy+0x267/0x3c0 net/core/dst.c:141
 dst_destroy_rcu+0x16/0x19 net/core/dst.c:154
 __rcu_reclaim kernel/rcu/rcu.h:236 [inline]
 rcu_do_batch kernel/rcu/tree.c:2576 [inline]
 invoke_rcu_callbacks kernel/rcu/tree.c:2880 [inline]
 __rcu_process_callbacks kernel/rcu/tree.c:2847 [inline]
 rcu_process_callbacks+0xf23/0x2670 kernel/rcu/tree.c:2864
 __do_softirq+0x30b/0xad8 kernel/softirq.c:292

Fixes: 1789a640f5 ("raw: avoid two atomics in xmit")
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:45:34 -07:00
Davide Caratti
4c2d39bd40 tc-testing: use a plugin to build eBPF program
use a TDC plugin, instead of building eBPF programs in the 'setup' stage.
'-B' argument can be used to build eBPF programs in $EBPFDIR directory,
in the 'pre-suite' stage. Binaries are then cleaned in 'post-suite' stage.

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:44:56 -07:00
Davide Caratti
cf5eafbfa5 tc-testing: fix build of eBPF programs
rely on uAPI headers in the current kernel tree, rather than requiring the
correct version installed on the test system. While at it, group all
sections in a single binary and test the 'section' parameter.

Reported-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:44:55 -07:00
David S. Miller
4a84810eaa Merge branch 'mscc-ocelot-add-support-for-SerDes-muxing-configuration'
Quentin Schulz says:

====================
mscc: ocelot: add support for SerDes muxing configuration

The Ocelot switch has currently an hardcoded SerDes muxing that suits only
a particular use case. Any other board setup will fail to work.

To prepare for upcoming boards' support that do not have the same muxing,
create a PHY driver that will handle all possible cases.

A SerDes can work in SGMII, QSGMII or PCIe and is also muxed to use a
given port depending on the selected mode or board design.

The SerDes configuration is in the middle of an address space (HSIO) that
is used to configure some parts in the MAC controller driver, that is why
we need to use a syscon so that we can write to the same address space from
different drivers safely using regmap.

This breaks backward compatibility but it's fine because there's only one
board at the moment that is using what's modified in this patch series.
This will break git bisect.

Even though this patch series is about SerDes __muxing__ configuration, the
DT node is named serdes for the simple reason that I couldn't find any
mention to SerDes anywhere else from the address space handled by this
driver.

v4:
  - add reviewed-by,
  - format the patch series with -M for identifying renamed files,
  - add parent info in DT binding of the SerDes IP,
  - move to macros SERDES[16]G(X) instead of multiple SERDES[16]G_[012345]
  constants,
  - move to SERDES[16]G_MAX being the last VALID macro of a type, so
  migrate to <= conditions instead of < when iterating,
  - create a SERDES_MUX_SGMII and SERDES_MUX_QSGMII macro so the muxing
  configurations are a tad more readable,
  - use a bunch of unsigned int instead of int,
  - return -EOPNOTSUPP for SERDES6G/PCIe until it's supported,
  - simplify condition when there is an error code returned by
  devm_of_phy_get,

v3:
  - add Paul Burton's Acked-By on MIPS patches so that the patch series can
  be merged in the net tree in its entirety,

v2:
  - use a switch case for setting the phy_mode in the SerDes driver as
  suggested by Andrew,
  - stop replacing the value of the error pointer in the SerDes driver,
  - use a dev_dbg for the deferring of the probe in the SerDes driver,
  - use constants in the Device Tree to select the SerDes macro in use with
  a port,
  - adapt the SerDes driver to use those constants,
  - add a header file in include/dt-bindings for the constants,
  - fix space/tab issue,
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:36:45 -07:00
Quentin Schulz
71e32a20cf net: mscc: ocelot: make use of SerDes PHYs for handling their configuration
Previously, the SerDes muxing was hardcoded to a given mode in the MAC
controller driver. Now, the SerDes muxing is configured within the
Device Tree and is enforced in the MAC controller driver so we can have
a lot of different SerDes configurations.

Make use of the SerDes PHYs in the MAC controller to set up the SerDes
according to the SerDes<->switch port mapping and the communication mode
with the Ethernet PHY.

Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:36:44 -07:00
Quentin Schulz
51f6b410fc phy: add driver for Microsemi Ocelot SerDes muxing
The Microsemi Ocelot can mux SerDes lanes (aka macros) to different
switch ports or even make it act as a PCIe interface.

This adds support for the muxing of the SerDes.

Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:36:44 -07:00
Quentin Schulz
b68fc09be4 dt-bindings: add constants for Microsemi Ocelot SerDes driver
The Microsemi Ocelot has multiple SerDes and requires that the SerDes be
muxed accordingly to the hardware representation.

Let's add a constant for each SerDes available in the Microsemi Ocelot.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:36:44 -07:00
Quentin Schulz
1d6a632c47 MIPS: mscc: ocelot: add SerDes mux DT node
The Microsemi Ocelot has a set of register for SerDes/switch port muxing
as well as PCIe muxing for a specific SerDes, so let's add the device
and all SerDes in the Device Tree.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:36:44 -07:00
Quentin Schulz
4b379fec4e dt-bindings: phy: add DT binding for Microsemi Ocelot SerDes muxing
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:36:44 -07:00
Quentin Schulz
c2a90025ad phy: add QSGMII and PCIE modes
Prepare for upcoming phys that'll handle QSGMII or PCIe.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:36:44 -07:00
Quentin Schulz
66c2132333 net: mscc: ocelot: simplify register access for PLL5 configuration
Since HSIO address space can be accessed by different drivers, let's
simplify the register address definitions so that it can be easily used
by all drivers and put the register address definition in the
include/soc/mscc/ocelot_hsio.h header file.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:36:44 -07:00
Quentin Schulz
8afc978925 net: mscc: ocelot: move the HSIO header to include/soc
Since HSIO address space can be used by different drivers (PLL, SerDes
muxing, temperature sensor), let's move it somewhere it can be included
by all drivers.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:36:44 -07:00
Quentin Schulz
19aedfbe65 net: mscc: ocelot: get HSIO regmap from syscon
HSIO address space was moved to a syscon, hence we need to get the
regmap of this address space from there and no more from the device
node.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:36:44 -07:00
Quentin Schulz
6afea95a80 dt-bindings: net: ocelot: remove hsio from the list of register address spaces
HSIO register address space should be handled outside of the MAC
controller as there are some registers for PLL5 configuring,
SerDes/switch port muxing and a thermal sensor IP, so let's remove it.

Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:36:43 -07:00
Quentin Schulz
3df0e6804f MIPS: mscc: ocelot: make HSIO registers address range a syscon
HSIO contains registers for PLL5 configuration, SerDes/switch port
muxing and a thermal sensor, hence we can't keep it in the switch DT
node.

Acked-by: Paul Burton <paul.burton@mips.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:36:43 -07:00
Anusha Srivatsa
00e5d8b1eb firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake.
Add missing MODULE_FIRMWARE while loading DMC ICL.

v2: Add Fixes tag. (Rodrigo)
v3: Rebase by Rodrigo after commit 7fe78985cd ("drm/i915/csr:
 restructure CSR firmware definition macros")
v4: Rodrigo fixing his own mess on commit mentioning on v3
    comment above.

Fixes: 4445930f1c ("firmware/dmc/icl: load v1.07 on icelake.")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004223613.19938-1-rodrigo.vivi@intel.com
2018-10-05 14:36:29 -07:00
Jakub Sitnicki
068b88cc17 socket: Tighten no-error check in bind()
move_addr_to_kernel() returns only negative values on error, or zero on
success. Rewrite the error check to an idiomatic form to avoid confusing
the reader.

Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:34:45 -07:00
Vineet Gupta
c58a584f05 ARC: clone syscall to setp r25 as thread pointer
Per ARC TLS ABI, r25 is designated TP (thread pointer register).
However so far kernel didn't do any special treatment, like setting up
usermode r25, even for CLONE_SETTLS. We instead relied on libc runtime
to do this, in say clone libc wrapper [1]. This was deliberate to keep
kernel ABI agnostic (userspace could potentially change TP, specially
for different ARC ISA say ARCompact vs. ARCv2 with different spare
registers etc)

However userspace setting up r25, after clone syscall opens a race, if
child is not scheduled and gets a signal instead. It starts off in
userspace not in clone but in a signal handler and anything TP sepcific
there such as pthread_self() fails which showed up with uClibc
testsuite nptl/tst-kill6 [2]

Fix this by having kernel populate r25 to TP value. So this locks in
ABI, but it was not going to change anyways, and fwiw is same for both
ARCompact (arc700 core) and ARCvs (HS3x cores)

[1] https://cgit.uclibc-ng.org/cgi/cgit/uclibc-ng.git/tree/libc/sysdeps/linux/arc/clone.S
[2] https://github.com/wbx-github/uclibc-ng-test/blob/master/test/nptl/tst-kill6.c

Fixes: ARC STAR 9001378481
Cc: stable@vger.kernel.org
Reported-by: Nikita Sobolev <sobolev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-10-05 14:33:29 -07:00
Lance Roy
9a694c1de3 atm: nicstar: Replace spin_is_locked() with spin_trylock()
ns_poll() used spin_is_locked() + spin_lock() to get achieve the same
thing as a spin_trylock(), so simplify it by using that instead. This is
also a step towards possibly removing spin_is_locked().

Signed-off-by: Lance Roy <ldr709@gmail.com>
Cc: Chas Williams <3chas3@gmail.com>
Cc: <linux-atm-general@lists.sourceforge.net>
Cc: <netdev@vger.kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:31:29 -07:00
David Ahern
8b4c3cdd9d net: sched: Add policy validation for tc attributes
A number of TC attributes are processed without proper validation
(e.g., length checks). Add a tca policy for all input attributes and use
when invoking nlmsg_parse.

The 2 Fixes tags below cover the latest additions. The other attributes
are a string (KIND), nested attribute (OPTIONS which does seem to have
validation in most cases), for dumps only or a flag.

Fixes: 5bc1701881 ("net: sched: introduce multichain support for filters")
Fixes: d47a6b0e7c ("net: sched: introduce ingress/egress block index attributes for qdisc")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:26:44 -07:00
Mauricio Faria de Oliveira
bd961c9bc6 rtnetlink: fix rtnl_fdb_dump() for ndmsg header
Currently, rtnl_fdb_dump() assumes the family header is 'struct ifinfomsg',
which is not always true -- 'struct ndmsg' is used by iproute2 ('ip neigh').

The problem is, the function bails out early if nlmsg_parse() fails, which
does occur for iproute2 usage of 'struct ndmsg' because the payload length
is shorter than the family header alone (as 'struct ifinfomsg' is assumed).

This breaks backward compatibility with userspace -- nothing is sent back.

Some examples with iproute2 and netlink library for go [1]:

 1) $ bridge fdb show
    33:33:00:00:00:01 dev ens3 self permanent
    01:00:5e:00:00:01 dev ens3 self permanent
    33:33:ff:15:98:30 dev ens3 self permanent

      This one works, as it uses 'struct ifinfomsg'.

      fdb_show() @ iproute2/bridge/fdb.c
        """
        .n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg)),
        ...
        if (rtnl_dump_request(&rth, RTM_GETNEIGH, [...]
        """

 2) $ ip --family bridge neigh
    RTNETLINK answers: Invalid argument
    Dump terminated

      This one fails, as it uses 'struct ndmsg'.

      do_show_or_flush() @ iproute2/ip/ipneigh.c
        """
        .n.nlmsg_type = RTM_GETNEIGH,
        .n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ndmsg)),
        """

 3) $ ./neighlist
    < no output >

      This one fails, as it uses 'struct ndmsg'-based.

      neighList() @ netlink/neigh_linux.go
        """
        req := h.newNetlinkRequest(unix.RTM_GETNEIGH, [...]
        msg := Ndmsg{
        """

The actual breakage was introduced by commit 0ff50e83b5 ("net: rtnetlink:
bail out from rtnl_fdb_dump() on parse error"), because nlmsg_parse() fails
if the payload length (with the _actual_ family header) is less than the
family header length alone (which is assumed, in parameter 'hdrlen').
This is true in the examples above with struct ndmsg, with size and payload
length shorter than struct ifinfomsg.

However, that commit just intends to fix something under the assumption the
family header is indeed an 'struct ifinfomsg' - by preventing access to the
payload as such (via 'ifm' pointer) if the payload length is not sufficient
to actually contain it.

The assumption was introduced by commit 5e6d243587 ("bridge: netlink dump
interface at par with brctl"), to support iproute2's 'bridge fdb' command
(not 'ip neigh') which indeed uses 'struct ifinfomsg', thus is not broken.

So, in order to unbreak the 'struct ndmsg' family headers and still allow
'struct ifinfomsg' to continue to work, check for the known message sizes
used with 'struct ndmsg' in iproute2 (with zero or one attribute which is
not used in this function anyway) then do not parse the data as ifinfomsg.

Same examples with this patch applied (or revert/before the original fix):

    $ bridge fdb show
    33:33:00:00:00:01 dev ens3 self permanent
    01:00:5e:00:00:01 dev ens3 self permanent
    33:33:ff:15:98:30 dev ens3 self permanent

    $ ip --family bridge neigh
    dev ens3 lladdr 33:33:00:00:00:01 PERMANENT
    dev ens3 lladdr 01:00:5e:00:00:01 PERMANENT
    dev ens3 lladdr 33:33:ff:15:98:30 PERMANENT

    $ ./neighlist
    netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x33, 0x33, 0x0, 0x0, 0x0, 0x1}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0}
    netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x1, 0x0, 0x5e, 0x0, 0x0, 0x1}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0}
    netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x33, 0x33, 0xff, 0x15, 0x98, 0x30}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0}

Tested on mainline (v4.19-rc6) and net-next (3bd09b05b0).

References:

[1] netlink library for go (test-case)
    https://github.com/vishvananda/netlink

    $ cat ~/go/src/neighlist/main.go
    package main
    import ("fmt"; "syscall"; "github.com/vishvananda/netlink")
    func main() {
        neighs, _ := netlink.NeighList(0, syscall.AF_BRIDGE)
        for _, neigh := range neighs { fmt.Printf("%#v\n", neigh) }
    }

    $ export GOPATH=~/go
    $ go get github.com/vishvananda/netlink
    $ go build neighlist
    $ ~/go/src/neighlist/neighlist

Thanks to David Ahern for suggestions to improve this patch.

Fixes: 0ff50e83b5 ("net: rtnetlink: bail out from rtnl_fdb_dump() on parse error")
Fixes: 5e6d243587 ("bridge: netlink dump interface at par with brctl")
Reported-by: Aidan Obley <aobley@pivotal.io>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:21:42 -07:00
Rodrigo Vivi
443d5e3973 drm/i915/icl: MBUS B credit change
No functional change. But just a minor change to keep
up with Spec, since it has changed since commit c3cc39c539
("drm/i915/icl: program mbus during pipe enable")

The instructions previously said to program pipe's
B credit = 24 / number of pipes, which is 8 for ICL.
Now the spec gives us direct values independent of number
of pipes. Let's keep in sync.

Also just a reorder on fields to make easier to compare
against spec's sequence: A -> BW -> B.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004151814.6054-1-rodrigo.vivi@intel.com
2018-10-05 13:52:12 -07:00
Lee, Shawn C
dfdaa566b7 drm/i915: Apply correct ddi translation table for AML device
Amber Lake used the same gen graphics as Kaby Lake. Kernel driver
should configure KBL's DDI buffer setting for AML ULX as well.

So far, driver would load DDI translation table that used for
KBL H/S platform and apply it on AML devices. But AML is belong to
ULX series. This change will lead driver to apply KBL-Y's DDI table
for AML devices to avoid unexpected eDP/DP signal quality issue.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1538034499-31256-2-git-send-email-shawn.c.lee@intel.com
2018-10-05 13:52:12 -07:00
Lee, Shawn C
ab2da3f8cd drm/i915: Add new AML_ULX support list
According to patch "drm/i915/aml: Introducing Amber Lake platform"
(e364672477). Add a new marco for AML ULX GT2 devices.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1538034499-31256-1-git-send-email-shawn.c.lee@intel.com
2018-10-05 13:52:12 -07:00
Rodrigo Vivi
c1c8f6fa73 drm/i915: Redefine some Whiskey Lake SKUs
commit 'b9be78531d ("drm/i915/whl: Introducing
Whiskey Lake platform")' introduced WHL by moving some
of CFL IDs here and using the Spec information of "U43" for
most of IDs what appeared to be GT3.

However when propagating the change to Mesa, Lionel noticed
that based on number of execution unities the classification
here seems at least strange.

So, let's move for now with the information we trust more:
the number of EUs. So we are able to propagate this change
across the stack without getting stuck forever.

Reference: https://patchwork.freedesktop.org/patch/246695/
Fixes: b9be78531d ("drm/i915/whl: Introducing Whiskey Lake platform")
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180924234312.15017-1-rodrigo.vivi@intel.com
2018-10-05 13:49:23 -07:00
Daniel Vetter
84c0851794 drm: Unexport drm_plane_helper_check_update
It's for legacy drivers only (atomic ones should use
drm_atomic_helper_check_plane_state() instead), and there's no users
left except the one in the primary plane helpers.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-18-daniel.vetter@ffwll.ch
2018-10-05 22:45:19 +02:00
Thomas Hellstrom
40e3defd19 drm/vmwgfx: Fix vmw_du_cursor_plane_atomic_check
Use the correct helper and also return early on helper
success rather than on helper failure.

Also explicitly return 0 in the case of no fb.

v2: Check for !fb after updating state->visible (Ville).

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> (v1)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-17-daniel.vetter@ffwll.ch
2018-10-05 22:43:41 +02:00
Ville Syrjälä
8e7a4424b9 drm/i915: Fix ILK-IVB sprite enable delays
Sprite enable on ILK-IVB may take two frames to complete
when the hardware is in big FIFO mode (LP1+). That is
not entirely great as it means the sprite enable may
actually happen one frame after we've already signalled
flip completion. At the very least crc checks may fail
due to the sprite not yet being visible when we expect it.

We already have code to deal with big FIFO mode when it
comes to the sprite scaling on IVB
(WaCxSRDisabledForSpriteScaling:ivb). Let's extend that
workaround to kick in whenever the sprite is in the process
of being enabled. Also ILK/SNB bspec has some notes to
indicate that we should most likely also do the sprite
scaling w/a on all three platforms, so let's do that as well.

Pretty easy to reproduce on SNB/IVB. ILK has proved more
elusive, but let's trust the spec and include it as well.

v2: Make sure the pipe is active before the vblank wait

Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Testcase: igt/kms_plane/pixel-format-pipe-*-planes
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107749
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20181004121527.30249-1-ville.syrjala@linux.intel.com
2018-10-05 23:31:41 +03:00
Madalin Bucur
6d06009cb2 soc: fsl: qbman: add interrupt coalesce changing APIs
Add the APIs required to control the QMan portal interrupt coalescing
settings.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2018-10-05 14:06:56 -05:00