Commit graph

932,869 commits

Author SHA1 Message Date
Bartosz Golaszewski
3ea47b447d gpio: mockup: use device properties instead of platform_data
Some users want to introduce device tree support to the mockup driver.
Let's make it easier by switching to using generic device properties.
The driver stays compatible with previous use cases and after this
conversion there'll be no need to change the way probing of mockup
GPIO chips works.

Tested with libgpiod test suite.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-03 09:53:16 +02:00
Miquel Raynal
b0e11e58c5 arm64: dts: marvell: add CP110 ICU SEI subnode
The ICU handles several interrupt groups, each of them being a subpart
of the ICU node.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-10-03 09:44:18 +02:00
Miquel Raynal
f21bb56e84 arm64: dts: marvell: use new bindings for CP110 interrupts
Create an ICU subnode for the NSR interrupts. This subnode becomes the
CP110 interrupt parent, removing the need for the ICU_GRP_NSR parameter.
Move all DT110 nodes to use these new bindings.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-10-03 09:44:09 +02:00
Arnd Bergmann
c5ad04dd44 pinctrl: qcom: fix 'const' pointer handling
The 'tiles' array is initialized to a constant pointers to constant
strings, but the declaration is only half as constant:

drivers/pinctrl/qcom/pinctrl-qcs404.c:1660:11: error: initialization discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
drivers/pinctrl/qcom/pinctrl-sdm660.c:1417:11: error: initialization discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]

Let's make it more constant.

Fixes: 22eb8301db ("pinctrl: qcom: Add qcs404 pinctrl driver")
Fixes: a46d5e9819 ("pinctrl: qcom: Support dispersed tiles")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-03 09:11:58 +02:00
Linus Walleij
936a3a23be pinctrl: nomadik: Fix debugfs
The .to_irq() function obviously takes the per-chip offset
as parameter, not the global GPIO number.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-03 09:10:52 +02:00
Andy Shevchenko
946ffefcdc pinctrl: intel: Fix a spelling typo in kernel documentation
The parameter 'community' had been spelled incorrectly.
Fix it here.

As a side effect it satisfies static checkers that issue
the following warnings:

drivers/pinctrl/intel/pinctrl-intel.c:845: warning: Function parameter or member 'community' not described in 'intel_gpio_to_pin'
drivers/pinctrl/intel/pinctrl-intel.c:845: warning: Excess function parameter 'commmunity' description in 'intel_gpio_to_pin'

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-03 09:05:35 +02:00
Andy Shevchenko
cd057a765f pinctrl: broxton: Convert unsigned to unsigned int
Simple type conversion with no functional change implied.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-03 09:05:32 +02:00
Andy Shevchenko
4e737af8c4 pinctrl: cherryview: Convert unsigned to unsigned int
Simple type conversion with no functional change implied.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-03 09:05:28 +02:00
Andy Shevchenko
939330d71e pinctrl: baytrail: Convert unsigned to unsigned int
Simple type conversion with no functional change implied.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-03 09:05:25 +02:00
Andy Shevchenko
04035f7f59 pinctrl: intel: Convert unsigned to unsigned int
Simple type conversion with no functional change implied.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-03 09:05:21 +02:00
Craig Tatlor
73ae1462b7 dt-bindings: pinctrl: qcom: Add SDM660 pinctrl binding
Add the binding for the TLMM pinctrl block found in the SDM660 platform.

Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-03 08:58:07 +02:00
Guenter Roeck
e4a02ed2aa locking/ww_mutex: Fix runtime warning in the WW mutex selftest
If CONFIG_WW_MUTEX_SELFTEST=y is enabled, booting an image
in an arm64 virtual machine results in the following
traceback if 8 CPUs are enabled:

  DEBUG_LOCKS_WARN_ON(__owner_task(owner) != current)
  WARNING: CPU: 2 PID: 537 at kernel/locking/mutex.c:1033 __mutex_unlock_slowpath+0x1a8/0x2e0
  ...
  Call trace:
   __mutex_unlock_slowpath()
   ww_mutex_unlock()
   test_cycle_work()
   process_one_work()
   worker_thread()
   kthread()
   ret_from_fork()

If requesting b_mutex fails with -EDEADLK, the error variable
is reassigned to the return value from calling ww_mutex_lock
on a_mutex again. If this call fails, a_mutex is not locked.
It is, however, unconditionally unlocked subsequently, causing
the reported warning. Fix the problem by using two error variables.

With this change, the selftest still fails as follows:

  cyclic deadlock not resolved, ret[7/8] = -35

However, the traceback is gone.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Fixes: d1b42b800e ("locking/ww_mutex: Add kselftests for resolving ww_mutex cyclic deadlocks")
Link: http://lkml.kernel.org/r/1538516929-9734-1-git-send-email-linux@roeck-us.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-03 08:56:31 +02:00
Waiman Long
ce52a18db4 locking/lockdep: Add a faster path in __lock_release()
When __lock_release() is called, the most likely unlock scenario is
on the innermost lock in the chain.  In this case, we can skip some of
the checks and provide a faster path to completion.

Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1538511560-10090-4-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-03 08:46:03 +02:00
Waiman Long
8ee1086247 locking/lockdep: Eliminate redundant IRQs check in __lock_acquire()
The static __lock_acquire() function has only two callers:

 1) lock_acquire()
 2) reacquire_held_locks()

In lock_acquire(), raw_local_irq_save() is called beforehand. So
IRQs must have been disabled. So the check:

	DEBUG_LOCKS_WARN_ON(!irqs_disabled())

is kind of redundant in this case. So move the above check
to reacquire_held_locks() to eliminate redundant code in the
lock_acquire() path.

Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1538511560-10090-3-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-03 08:46:02 +02:00
Waiman Long
44318d5b07 locking/lockdep: Remove add_chain_cache_classes()
The inline function add_chain_cache_classes() is defined, but has no
caller. Just remove it.

Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1538511560-10090-2-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-03 08:46:02 +02:00
Dave Airlie
77d981b16f Use default iommu domain instead of fake one
- This patch makes it to reuse default IOMMU domain instead of
   allocating a fake IOMMU domain, and allows some design changes
   for enhancement of IOMMU framework[1] without breaking Exynos DRM.
 
 [1] https://www.spinics.net/lists/arm-kernel/msg676098.html
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbsYFzAAoJEFc4NIkMQxK4lxsP/1EbVvEq0BhjYLo6CcGA099B
 jFv9PPgcCKw8e0lSZ2Hxs+OsNF8lXD8ylxwzmXOSKPo9EtMGtHs+0dMTJfeZvmqZ
 NSM4WkJmqjAFl4fsTZzRzaWbM0++F/AelO6V6wX9jaNb7rOr9AKtA7lDKyFuqlKq
 4m36fvyxOm5V0uUgV6yphtSBE02tnjCc+fwlZCDzQ/vsneS163FJTSWZ+JZ1ES34
 pSUMaPyIgM09I7wBCzNMYKIqfzkygzpu0DHJsG6HCW86ypDCtOkOMM44Abr1mmfo
 d5l9SrreHom17ghBflRJsdsGd7um8nRKqbvgQ2wyd1pCl62RqPK0y5bvXW2UkuQK
 CdB4lZP1JeuKjeFTy16R5I0JMTZQMdLVd2eeQZRfm7gKxb4RI5TxO9ddCDVnwQXy
 p37ee/wz8Rbq8+5oeXGy0IYXXl0lrAPdTXSTOz/w0T0iNvZkg6XCWcheVvsqowj/
 aPy4wpPg/TXRB9294JUNFQYMZmPs7IrzwSLNxKh9LaTxy+TIznhl2AYUXsMfpuz1
 vjzyRaBiBC48K7W+z5eelHitgfbXO26AfA3M4PmwZdrvGcvjTxyun9l95rY0cN3/
 2LA4nfdbhWDH0FAnInec5K1U63y1oypIHnZjm1nfAh+T4oacSCpGinEXtEYJF6mF
 YGdRK5F7oZ8msZwa6AkV
 =S0+P
 -----END PGP SIGNATURE-----

Merge tag 'exynos-drm-fixes-for-v4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes

Use default iommu domain instead of fake one
- This patch makes it to reuse default IOMMU domain instead of
  allocating a fake IOMMU domain, and allows some design changes
  for enhancement of IOMMU framework[1] without breaking Exynos DRM.

[1] https://www.spinics.net/lists/arm-kernel/msg676098.html

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1538360696-23579-1-git-send-email-inki.dae@samsung.com
2018-10-03 16:31:16 +10:00
Nathan Chancellor
88296bd42b x86/cpu/amd: Remove unnecessary parentheses
Clang warns when multiple pairs of parentheses are used for a single
conditional statement.

arch/x86/kernel/cpu/amd.c:925:14: warning: equality comparison with
extraneous parentheses [-Wparentheses-equality]
        if ((c->x86 == 6)) {
             ~~~~~~~^~~~
arch/x86/kernel/cpu/amd.c:925:14: note: remove extraneous parentheses
around the comparison to silence this warning
        if ((c->x86 == 6)) {
            ~       ^   ~
arch/x86/kernel/cpu/amd.c:925:14: note: use '=' to turn this equality
comparison into an assignment
        if ((c->x86 == 6)) {
                    ^~
                    =
1 warning generated.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181002224511.14929-1-natechancellor@gmail.com
Link: https://github.com/ClangBuiltLinux/linux/issues/187
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-03 08:27:47 +02:00
Andy Lutomirski
4f16656401 x86/vdso: Only enable vDSO retpolines when enabled and supported
When I fixed the vDSO build to use inline retpolines, I messed up
the Makefile logic and made it unconditional.  It should have
depended on CONFIG_RETPOLINE and on the availability of compiler
support.  This broke the build on some older compilers.

Reported-by: nikola.ciprich@linuxbox.cz
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Rickard <matt@softrans.com.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jason.vas.dias@gmail.com
Cc: stable@vger.kernel.org
Fixes: 2e549b2ee0 ("x86/vdso: Fix vDSO build if a retpoline is emitted")
Link: http://lkml.kernel.org/r/08a1f29f2c238dd1f493945e702a521f8a5aa3ae.1538540801.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-03 08:26:14 +02:00
Christophe Leroy
d90fe2acd9 powerpc: Wire up memtest
Add call to early_memtest() so that kernel compiled with
CONFIG_MEMTEST really perform memtest at startup when requested
via 'memtest' boot parameter.

Tested-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 16:12:47 +10:00
Vakul Garg
4e6d47206c tls: Add support for inplace records encryption
Presently, for non-zero copy case, separate pages are allocated for
storing plaintext and encrypted text of records. These pages are stored
in sg_plaintext_data and sg_encrypted_data scatterlists inside record
structure. Further, sg_plaintext_data & sg_encrypted_data are passed
to cryptoapis for record encryption. Allocating separate pages for
plaintext and encrypted text is inefficient from both required memory
and performance point of view.

This patch adds support of inplace encryption of records. For non-zero
copy case, we reuse the pages from sg_encrypted_data scatterlist to
copy the application's plaintext data. For the movement of pages from
sg_encrypted_data to sg_plaintext_data scatterlists, we introduce a new
function move_to_plaintext_sg(). This function add pages into
sg_plaintext_data from sg_encrypted_data scatterlists.

tls_do_encryption() is modified to pass the same scatterlist as both
source and destination into aead_request_set_crypt() if inplace crypto
has been enabled. A new ariable 'inplace_crypto' has been introduced in
record structure to signify whether the same scatterlist can be used.
By default, the inplace_crypto is enabled in get_rec(). If zero-copy is
used (i.e. plaintext data is not copied), inplace_crypto is set to '0'.

Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Reviewed-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02 23:03:47 -07:00
Hauke Mehrtens
6502f8562a net: dsa: lantiq: Fix path in MAINTAINERS file
The MAINTAINERS file contained the wrong file name of the driver.

Fixes: 14fceff477 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02 22:58:40 -07:00
Stephen Hemminger
2a7f8c3b1d hv_netvsc: remove ndo_poll_controller
Similar to other patches from ERic.

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

In netvsc driver it uses NAPI for TX completions. The default
poll_napi will do this for us now and avoid the capture.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Eric Dumazet <edumazet@google.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02 22:57:34 -07:00
Andrew Lunn
d777f552fc MAINTAINERS: Fix wrong include file path
Fix the patch for the mv88e6xxx.h header file in MAINTAINERS

Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02 22:56:36 -07:00
Christophe Leroy
803d690e68 powerpc/mm: Don't report hugepage tables as memory leaks when using kmemleak
When a process allocates a hugepage, the following leak is
reported by kmemleak. This is a false positive which is
due to the pointer to the table being stored in the PGD
as physical memory address and not virtual memory pointer.

unreferenced object 0xc30f8200 (size 512):
  comm "mmap", pid 374, jiffies 4872494 (age 627.630s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<e32b68da>] huge_pte_alloc+0xdc/0x1f8
    [<9e0df1e1>] hugetlb_fault+0x560/0x8f8
    [<7938ec6c>] follow_hugetlb_page+0x14c/0x44c
    [<afbdb405>] __get_user_pages+0x1c4/0x3dc
    [<b8fd7cd9>] __mm_populate+0xac/0x140
    [<3215421e>] vm_mmap_pgoff+0xb4/0xb8
    [<c148db69>] ksys_mmap_pgoff+0xcc/0x1fc
    [<4fcd760f>] ret_from_syscall+0x0/0x38

See commit a984506c54 ("powerpc/mm: Don't report PUDs as
memory leaks when using kmemleak") for detailed explanation.

To fix that, this patch tells kmemleak to ignore the allocated
hugepage table.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:07 +10:00
Michael Neuling
306b1c0617 powerpc/tm: Reformat comments
The comments in this file don't conform to the coding style so take
them to "Comment Formatting Re-Education Camp".

Suggested-by: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Neuling <mikey@neuling.org>
[mpe: Reflow some comments and add full stops, fix spelling of Sergeant.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:07 +10:00
Petr Vorel
5bd9b4445d powerpc/config: Enable CONFIG_PRINTK_TIME
for 64bit configs which use for CONFIG_LOG_BUF_SHIFT the same
or higher value than the default (currently 17).

Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:06 +10:00
YueHaibing
01b9870ea6 powerpc: Remove duplicated include from pci_32.c
Remove duplicated include.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:06 +10:00
Michal Suchanek
8a03e81cb1 powerpc/64s: consolidate MCE counter increment.
The code in machine_check_exception excludes 64s hvmode when
incrementing the MCE counter only to call opal_machine_check to
increment it specifically for this case.

Remove the exclusion and special case.

Fixes: a43c159042 ("powerpc/pseries: Flush SLB contents on SLB MCE
		errors.")

Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:06 +10:00
Breno Leitao
51303113e3 powerpc/tm: Print 64-bits MSR
On a kernel TM Bad thing program exception, the Machine State Register
(MSR) is not being properly displayed. The exception code dumps a 32-bits
value but MSR is a 64 bits register for all platforms that have HTM
enabled.

This patch dumps the MSR value as a 64-bits value instead of 32 bits. In
order to do so, the 'reason' variable could not be used, since it trimmed
MSR to 32-bits (int).

Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:05 +10:00
Breno Leitao
5c784c8414 powerpc/tm: Remove msr_tm_active()
Currently msr_tm_active() is a wrapper around MSR_TM_ACTIVE() if
CONFIG_PPC_TRANSACTIONAL_MEM is set, or it is just a function that
returns false if CONFIG_PPC_TRANSACTIONAL_MEM is not set.

This function is not necessary, since MSR_TM_ACTIVE() just do the same and
could be used, removing the dualism and simplifying the code.

This patchset remove every instance of msr_tm_active() and replaced it
by MSR_TM_ACTIVE().

Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:05 +10:00
Breno Leitao
62dea077f5 powerpc/powernv: Mark function as __noreturn
There is a mismatch between function pnv_platform_error_reboot() definition
and declaration regarding function modifiers. In the declaration part, it
contains the function attribute __noreturn, while function definition
itself lacks it.

This was reported by sparse tool as an error:

  arch/powerpc/platforms/powernv/opal.c:538:6: error: symbol 'pnv_platform_error_reboot' redeclared with different type (originally declared at arch/powerpc/platforms/powernv/powernv.h:11) - different modifiers

I checked and the function is already being considered as being 'noreturn'
by the compiler, thus, I understand this patch does not change any code
being generated.

Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:05 +10:00
Breno Leitao
fc35ef12dc selftests/powerpc: New PTRACE_SYSEMU test
This patch adds a new test for the new PTRACE_SYSEMU ptrace request.

This test also relies on PTRACE_GETREGS and PTRACE_SETREGS requests to
run properly, since the trace instruction (gettid() syscall) is being
modified at run-time (by PTRACE_SETREGS) and re-executed three times.
PTRACE_GETREGS is being used to check that the registers are still
sane.

This test basically creates a child process that executes syscalls
and the parent process check if it is being traced appropriately.  The
parent process guarantees that the SYSCALLs are being traced, with
PTRACE_SYSEMU, and ptrace stops the child application before a syscall is
executed. The way the tests validates it, is by guaranteeing that the
system calls arguments, as argv[0] (r3) which is the same register that
will have the syscall return value on powerpc, are not being corrupted on
PTRACE_SYSEMU with a return value, i.e, it continues to have the current
arguments instead, meaning that the registers where not clobbered.

This test is basically the same test for x86 located at
tools/testing/selftests/x86/ptrace_syscall.c, limited to test PTRACE_SYSEMU
request, and ported to PowerPC.

Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:04 +10:00
Breno Leitao
5521eb4bca powerpc/ptrace: Add support for PTRACE_SYSEMU
This is a patch that adds support for PTRACE_SYSEMU ptrace request in
PowerPC architecture.

When ptrace(PTRACE_SYSEMU, ...) request is called, it will be handled by
the arch independent function ptrace_resume(), which will tag the task with
the TIF_SYSCALL_EMU flag. This flag needs to be handled from a platform
dependent point of view, which is what this patch does.

This patch adds this task's flag as part of the _TIF_SYSCALL_DOTRACE, which
is the MACRO that is used to trace syscalls at entrance/exit.

Since TIF_SYSCALL_EMU is now part of _TIF_SYSCALL_DOTRACE, if the task has
_TIF_SYSCALL_DOTRACE set, it will hit do_syscall_trace_enter() at syscall
entrance and do_syscall_trace_leave() at syscall leave.
do_syscall_trace_enter() needs to handle the TIF_SYSCALL_EMU flag properly,
which will interrupt the syscall executing if TIF_SYSCALL_EMU is set. The
output values should not be changed, i.e. the return value (r3) should
contain the original syscall argument on exit.

With this flag set, the syscall is not executed fundamentally, because
do_syscall_trace_enter() is returning -1 which is bigger than NR_syscall,
thus, skipping the syscall execution and exiting userspace.

Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:04 +10:00
Breno Leitao
16d7c69c89 powerpc: Redefine TIF_32BITS thread flag
Moving TIF_32BIT to use bit 20 instead of 4 in the task flag field.

This change is making room for an upcoming new task macro
(_TIF_SYSCALL_EMU) which is preferred to set a bit in the lower 16-bits
part of the word.

This upcoming flag macro will take part in a composed macro
(_TIF_SYSCALL_DOTRACE) which will contain other flags as well, and it is
preferred that the whole _TIF_SYSCALL_DOTRACE macro only sets the lower 16
bits of a word, so, it could be handled using immediate operations (as load
immediate, add immediate, ...) where the immediate operand (SI) is limited
to 16-bits.

Another possible solution would be using the LOAD_REG_IMMEDIATE() macro
to load a full 64-bits word immediate, but it takes 5 operations instead of
one.

Having TIF_32BITS being redefined to use an upper bit is not a problem
since there is only one place in the assembly code where TIF_32BIT is being
used, and it could be replaced with an operation with right shift (addis),
since it is used alone, i.e. not being part of a composed macro, which has
different bits set, and would require LOAD_REG_IMMEDIATE().

Tested on a 64 bits Big Endian machine running a 32 bits task.

Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:04 +10:00
Christophe Leroy
06ec27aea9 powerpc/64: add stack protector support
On PPC64, as register r13 points to the paca_struct at all time,
this patch adds a copy of the canary there, which is copied at
task_switch.
That new canary is then used by using the following GCC options:
-mstack-protector-guard=tls
-mstack-protector-guard-reg=r13
-mstack-protector-guard-offset=offsetof(struct paca_struct, canary))

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:03 +10:00
Christophe Leroy
c3ff2a5193 powerpc/32: add stack protector support
This functionality was tentatively added in the past
(commit 6533b7c16e ("powerpc: Initial stack protector
(-fstack-protector) support")) but had to be reverted
(commit f2574030b0 ("powerpc: Revert the initial stack
protector support") because of GCC implementing it differently
whether it had been built with libc support or not.

Now, GCC offers the possibility to manually set the
stack-protector mode (global or tls) regardless of libc support.

This time, the patch selects HAVE_STACKPROTECTOR only if
-mstack-protector-guard=tls is supported by GCC.

On PPC32, as register r2 points to current task_struct at
all time, the stack_canary located inside task_struct can be
used directly by using the following GCC options:
-mstack-protector-guard=tls
-mstack-protector-guard-reg=r2
-mstack-protector-guard-offset=offsetof(struct task_struct, stack_canary))

The protector is disabled for prom_init and bootx_init as
it is too early to handle it properly.

 $ echo CORRUPT_STACK > /sys/kernel/debug/provoke-crash/DIRECT
[  134.943666] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: lkdtm_CORRUPT_STACK+0x64/0x64
[  134.943666]
[  134.955414] CPU: 0 PID: 283 Comm: sh Not tainted 4.18.0-s3k-dev-12143-ga3272be41209 #835
[  134.963380] Call Trace:
[  134.965860] [c6615d60] [c001f76c] panic+0x118/0x260 (unreliable)
[  134.971775] [c6615dc0] [c001f654] panic+0x0/0x260
[  134.976435] [c6615dd0] [c032c368] lkdtm_CORRUPT_STACK_STRONG+0x0/0x64
[  134.982769] [c6615e00] [ffffffff] 0xffffffff

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:03 +10:00
zhong jiang
cd5ff94577 powerpc/xive: Move a dereference below a NULL test
Move the dereference of xc below the NULL test.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:02 +10:00
Naveen N. Rao
9258227e9d powerpc/pseries: Fix how we iterate over the DTL entries
When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set, we look up dtl_idx in
the lppaca to determine the number of entries in the buffer. Since
lppaca is in big endian, we need to do an endian conversion before using
this in our calculation to determine the number of entries in the
buffer. Without this, we do not iterate over the existing entries in the
DTL buffer properly.

Fixes: 7c105b63bd ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:02 +10:00
Naveen N. Rao
db787af1b8 powerpc/pseries: Fix DTL buffer registration
When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set, we register the DTL
buffer for a cpu when the associated file under powerpc/dtl in debugfs
is opened. When doing so, we need to set the size of the buffer being
registered in the second u32 word of the buffer. This needs to be in big
endian, but we are not doing the conversion resulting in the below error
showing up in dmesg:

	dtl_start: DTL registration for cpu 0 (hw 0) failed with -4

Fix this in the obvious manner.

Fixes: 7c105b63bd ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:02 +10:00
Christophe Leroy
51423a9c9b powerpc/traps: merge unrecoverable_exception() and nonrecoverable_exception()
PPC32 uses nonrecoverable_exception() while PPC64 uses
unrecoverable_exception().

Both functions are doing almost the same thing.

This patch removes nonrecoverable_exception()

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:01 +10:00
Rob Herring
b9ef7b4b86 powerpc: Convert to using %pOFn instead of device_node.name
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:01 +10:00
Rob Herring
0bdba867f0 macintosh: Convert to using %pOFn instead of device_node.name
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:01 +10:00
Rob Herring
c417596d24 powerpc/pseries: Use of_irq_get helper() in request_event_sources_irqs()
Instead of calling both of_irq_parse_one() and
irq_create_of_mapping(), call of_irq_get() instead which does
essentially the same thing. of_irq_get() also calls irq_find_host()
for deferred probe support, but this should be fine as
irq_create_of_mapping() also calls that internally. This gets us
closer to making the former 2 functions static.

In the process of simplifying request_event_sources_irqs(), combine
the the pr_err() and WARN_ON() calls to just a WARN().

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:01 +10:00
Rob Herring
8c8933eba0 powerpc/cell: Use irq_of_parse_and_map() helper
Instead of calling both of_irq_parse_one() and
irq_create_of_mapping(), call of_irq_parse_and_map() instead which
does the same thing. This gets us closer to making the former 2
functions static.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:00 +10:00
Aneesh Kumar K.V
a0820ff334 powerpc/mm:book3s: Enable THP migration support
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:00 +10:00
Aneesh Kumar K.V
8890e03380 powerpc/mm/thp: update pmd_trans_huge to check for pmd_present
We need to make sure pmd_trans_huge returns false for a pmd migration entry.
We mark the migration entry by clearing the _PAGE_PRESENT bit. We keep the
_PAGE_PTE bit set to indicate a leaf page table entry. Hence we need to make
sure we check for pmd_present() so that pmd_trans_huge won't return true on
pmd migration entry.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:40:00 +10:00
Aneesh Kumar K.V
75646c480f arch/powerpc/mm/hash: validate the pte entries before handling the hash fault
Make sure we are operating on THP and hugetlb entries in the respective hash
fault handling routines.

No functional change in this patch. If we walked the table wrongly before, we
will retry the access.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:39:59 +10:00
Aneesh Kumar K.V
ae28f17b5e powerpc/mm/book3s: Check for pmd_large instead of pmd_trans_huge
Update few code paths to check for pmd_large.

set_pmd_at:
We want to use this to store swap pte at pmd level. For swap ptes we don't want
to set H_PAGE_THP_HUGE. Hence check for pmd_large in set_pmd_at. This remove
the false WARN_ON when using this with swap pmd entry.

pmd_page:
We don't really use them on pmd migration entries. But they can also work with
migration entries and we don't differentiate at the pte level. Hence update
pmd_page to work with pmd migration entries too

__find_linux_pte:
lockless page table walk need to handle pmd migration entries. pmd_trans_huge
check will return false on them. We don't set thp = 1 for such entries, but
update hpage_shift correctly. Without this we will walk pmd migration entries
as a pte page pointer which is wrong.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:39:59 +10:00
Aneesh Kumar K.V
f1981b5b30 powerpc/mm/hugetlb/book3s: add _PAGE_PRESENT to hugepd pointer.
This make hugetlb directory pointer similar to other page able entries. A hugepd
entry is identified by lack of _PAGE_PTE bit set and directory size stored in
HUGEPD_SHIFT_MASK. We update that to also look at _PAGE_PRESENT

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:39:58 +10:00
Aneesh Kumar K.V
da7ad366b4 powerpc/mm/book3s: Update pmd_present to look at _PAGE_PRESENT bit
With this patch we use 0x8000000000000000UL (_PAGE_PRESENT) to indicate a valid
pgd/pud/pmd entry. We also switch the p**_present() to look at this bit.

With pmd_present, we have a special case. We need to make sure we consider a
pmd marked invalid during THP split as present. Right now we clear the
_PAGE_PRESENT bit during a pmdp_invalidate. Inorder to consider this special
case we add a new pte bit _PAGE_INVALID (mapped to _RPAGE_SW0). This bit is
only used with _PAGE_PRESENT cleared. Hence we are not really losing a pte bit
for this special case. pmd_present is also updated to look at _PAGE_INVALID.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 15:39:58 +10:00