Ever since fast reboot is enabled by default in opal,
opal_cec_reboot() will use fast-reset instead of full IPL to perform
system reboot. This leaves the user with no direct way to force a full
IPL reboot except changing an nvram setting that persistently disables
fast-reset for all subsequent reboots.
This patch provides a more direct way for the user to force a one-shot
full IPL reboot by passing the command line argument 'full' to the
reboot command. So the user will be able to tweak the reboot behavior
via:
$ sudo reboot full # Force a full ipl reboot skipping fast-reset
or
$ sudo reboot # default reboot path (usually fast-reset)
The reboot command passes the un-parsed command argument to the kernel
via the 'Reboot' syscall which is then passed on to the arch function
pnv_restart(). The patch updates pnv_restart() to handle this cmd-arg
and issues opal_cec_reboot2 with OPAL_REBOOT_FULL_IPL to force a full
IPL reset.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In power7_marked_instr_event() there is a switch case that is missing
a break or an explicit fallthrough, it's not immediately clear which
it should be.
The function determines based on the PMU event code, whether the event
is a "marked" event (which then requires us to configure the PMU in a
certain way). On Power7 there is no specific bit(s) in the event to
tell us that, we just have to know.
Rather than having a full list of every event and whether they are
marked, we pull apart the event code and for events with certain
values of certain fields we can say that those are all marked events.
We take the psel (bits 0-7) of the event, and look at bits 4-7. For a
value of 6 we say that if the entire psel == 0x64 then if the pmc == 3
the event is marked, else not, and otherwise we continue.
It is then that we fallthrough to the 8 case, where we return true if
the unit == 0xd.
The question is should the 6 case also fallthrough and check for
unit == 0xd, or should it return.
Looking at the full list of events we see that there are zero events
where (psel >> 4) == 0x6 and unit == 0xd.
So the answer is it doesn't really matter, there are no valid event
codes that will return a different result whether we fallthrough or
break.
But equally, testing the 6 case events against unit == 0xd is slightly
bogus, as there are no such events. So to make the code clearer, and
avoid any future confusion, have the 6 case break rather than falling
through.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Johan Hedberg says:
====================
pull request: bluetooth-next 2018-09-30
Here's the first bluetooth-next pull request for the 4.20 kernel.
- Fixes & cleanups to hci_qca driver
- NULL dereference fix to debugfs
- Improved L2CAP Connection-oriented Channel MTU & MPS handling
- Added support for USB-based RTL8822C controller
- Added device ID for BCM4335C0 UART-based controller
- Various other smaller cleanups & fixes
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This affects at least versions 25 and 33, so assume all cards are broken
and just renegotiate by default.
Fixes: 10bc6a6042 ("r8169: fix autoneg issue on resume with RTL8168E")
Signed-off-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commits:
5e46e29e6a ("powerpc/64s/hash: convert SLB miss handlers to C")
8fed04d0f6 ("powerpc/64s/hash: remove user SLB data from the paca")
655deecf67 ("powerpc/64s/hash: SLB allocation status bitmaps")
2e1626744e ("powerpc/64s/hash: provide arch_setup_exec hooks for hash slice setup")
89ca4e126a ("powerpc/64s/hash: Add a SLB preload cache")
This series had a few bugs, and the fixes are not all trivial. So
revert most of it for now.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Caching ip_hdr(skb) before a call to pskb_may_pull() is buggy,
do not do it.
Fixes: 2efd4fca70 ("ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clang warns when one enumerated type is implicitly converted to another.
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:390:4: warning: implicit
conversion from enumeration type 'enum cxgb4_dcb_state' to different
enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion]
IEEE_FAUX_SYNC(dev, dcb);
^~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h:70:10: note: expanded
from macro 'IEEE_FAUX_SYNC'
CXGB4_DCB_STATE_FW_ALLSYNCED);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use the equivalent value of the expected type to silence Clang while
resulting in no functional change.
CXGB4_DCB_STATE_FW_ALLSYNCED = CXGB4_DCB_INPUT_FW_ALLSYNCED = 3
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clang warns when one enumerated type is implicitly converted to another.
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:303:7: warning: implicit
conversion from enumeration type 'enum cxgb4_dcb_state' to different
enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion]
? CXGB4_DCB_STATE_FW_ALLSYNCED
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:304:7: warning: implicit
conversion from enumeration type 'enum cxgb4_dcb_state' to different
enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion]
: CXGB4_DCB_STATE_FW_INCOMPLETE);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2 warnings generated.
Use the equivalent value of the expected type to silence Clang while
resulting in no functional change.
CXGB4_DCB_STATE_FW_INCOMPLETE = CXGB4_DCB_INPUT_FW_INCOMPLETE = 2
CXGB4_DCB_STATE_FW_ALLSYNCED = CXGB4_DCB_INPUT_FW_ALLSYNCED = 3
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clang warns:
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:2734:34: warning:
tentative array definition assumed to have one element
static const struct of_device_id dpaa_match[];
^
1 warning generated.
Turns out that since this driver was introduced in commit 9ad1a37493
("dpaa_eth: add support for DPAA Ethernet"), this declaration has been
unused. Remove it to silence the warning.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code to obtain the correct table for the incoming interface was
missing for IPv6. This has been added along with the table creation
notification to fib rules for the RTNL_FAMILY_IP6MR address family.
Signed-off-by: Patrick Ruddy <pruddy@vyatta.att-mail.com>
Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is useful to be able to use the same socket for listening in a
specific VRF, as for sending multicast packets out of a specific
interface. However, the bound device on the socket currently takes
precedence and results in the packets not being sent.
Relax the condition on overriding the output interface to use for
sending packets out of UDP, raw and ping sockets to allow multicast
packets to be sent using the specified multicast interface.
Signed-off-by: Robert Shearman <rshearma@vyatta.att-mail.com>
Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 13cefad2f2 ("net: bridge: convert and rename mcast disabled")
converted the 'multicast_disabled' field to an option bit named
'BROPT_MULTICAST_ENABLED'.
While the old field was implicitly initialized to 0, the new field is
not initialized, resulting in the bridge defaulting to multicast
disabled state and breaking existing applications.
Fix this by explicitly initializing the option.
Fixes: 13cefad2f2 ("net: bridge: convert and rename mcast disabled")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Radulescu says:
====================
dpaa2-eth: Add support for Rx flow classification
The Management Complex (MC) firmware initially allowed the
configuration of a single key to be used both for Rx flow hashing
and flow classification. This prevented us from supporting
Rx flow classification independently of the hash key configuration.
Newer firmware versions expose separate commands for
configuring the two types of keys, so we can use them to
introduce Rx classification support. For frames that don't match
any classification rule, we fall back to statistical distribution
based on the current hash key.
The first patch in this set updates the Rx hashing code to use
the new firmware API for key config. Subsequent patches introduce
the firmware API for configuring the classification and actual
support for adding and deleting rules via ethtool.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for inserting and deleting Rx flow classification
rules through ethtool.
We support classification based on some header fields for
flow-types ether, ip4, tcp4, udp4 and sctp4.
Rx queues are core affine, so the action argument effectively
selects on which cpu the matching frame will be processed.
Discarding the frame is also supported.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For firmware versions that support it, configure an Rx flow
classification key at probe time.
Hardware expects all rules in the classification table to share
the same key. So we setup a key containing all supported fields
at driver init and when a user adds classification rules through
ethtool, we will just mask out the unused header fields.
Since the key composition process is the same for flow
classification and hashing, reuse existing code where possible.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the array of supported header fields will be used for
Rx flow classification as well, rename it from "hash_fields" to
the more inclusive "dist_fields".
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Management Complex (MC) firmware initially allowed the
configuration of a single key to be used both for Rx flow hashing
and flow classification. This prevented us from supporting
Rx flow classification through ethtool.
Starting with version 10.7.0, the Management Complex(MC) offers
a new set of APIs for separate configuration of Rx hashing and
classification keys.
Update the Rx flow hashing support to use the new API, if available.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver_info field that is used for describing each of the usb-net
drivers using the usbnet.c core all declare their information as const
and the usbnet.c itself does not try and modify the struct.
It is therefore a good idea to make this const in the usbnet.c structure
in case anyone tries to modify it.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbsmA5AAoJEEg/ir3gV/o+Bg0IAM4qUD878349YufTxlNI3usz
pPyRYLFfh+f3oTjGWxZ4SlAzMsCVnGDWMKFBj33qnJen1YcMxD2DriTIStQfOHkE
EpErxxMa70YFY2VyvD6Gt/Xfw9Q4ZGrp9j4tNnXVBMVT+EDhui/OpHFlpgoLtpLk
A8pxPRkbQNdql4OWOLwVpFJoleB0mJp4+ed+z743z4ectBfY0Iqx6Yyk1TRUzLfB
o/cUV02M33Fi8XjjZ59crPrIc4r0iUcPDcd5+8i2WtOkfbFod9s1Dg4GMNbGpcFn
RPJX9A+XilMPCJNM8YhwcS2JxX8Y2XwUjBDbspx0RHX3HZY22SjuN2i5p1GZnLo=
=pu43
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2018-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2018-10-01
This pull request includes some fixes to mlx5 driver,
Please pull and let me know if there's any problem.
For -stable v4.11:
"6e0a4a23c59a ('net/mlx5: E-Switch, Fix out of bound access when setting vport rate')"
For -stable v4.18:
"98d6627c372a ('net/mlx5e: Set vlan masks for all offloaded TC rules')"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
syzkaller was able to hit the WARN_ON(sock_owned_by_user(sk));
in tcp_close()
While a socket is being closed, it is very possible other
threads find it in rtnetlink dump.
tcp_get_info() will acquire the socket lock for a short amount
of time (slow = lock_sock_fast(sk)/unlock_sock_fast(sk, slow);),
enough to trigger the warning.
Fixes: 67db3e4bfb ("tcp: no longer hold ehash lock while calling tcp_get_info()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subash Abhinov Kasiviswanathan says:
====================
net: qualcomm: rmnet: Updates 2018-10-02
This series is a set of small fixes for rmnet driver
Patch 1 is a fix for a scenario reported by syzkaller
Patch 2 & 3 are fixes for incorrect allocation flags
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The incoming skb needs to be reallocated in case the headroom
is not sufficient to adjust the ethernet header. This allocation
needs to be atomic otherwise it results in this splat
[<600601bb>] ___might_sleep+0x185/0x1a3
[<603f6314>] ? _raw_spin_unlock_irqrestore+0x0/0x27
[<60069bb0>] ? __wake_up_common_lock+0x95/0xd1
[<600602b0>] __might_sleep+0xd7/0xe2
[<60065598>] ? enqueue_task_fair+0x112/0x209
[<600eea13>] __kmalloc_track_caller+0x5d/0x124
[<600ee9b6>] ? __kmalloc_track_caller+0x0/0x124
[<602696d5>] __kmalloc_reserve.isra.34+0x30/0x7e
[<603f629b>] ? _raw_spin_lock_irqsave+0x0/0x3d
[<6026b744>] pskb_expand_head+0xbf/0x310
[<6025ca6a>] rmnet_rx_handler+0x7e/0x16b
[<6025c9ec>] ? rmnet_rx_handler+0x0/0x16b
[<6027ad0c>] __netif_receive_skb_core+0x301/0x96f
[<60033c17>] ? set_signals+0x0/0x40
[<6027bbcb>] __netif_receive_skb+0x24/0x8e
Fixes: 74692caf1b ("net: qualcomm: rmnet: Process packets over ethernet")
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The incoming skb needs to be reallocated in case the headroom
is not sufficient to add the MAP header. This allocation needs to
be atomic otherwise it results in the following splat
[32805.801456] BUG: sleeping function called from invalid context
[32805.841141] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[32805.904773] task: ffffffd7c5f62280 task.stack: ffffff80464a8000
[32805.910851] pc : ___might_sleep+0x180/0x188
[32805.915143] lr : ___might_sleep+0x180/0x188
[32806.131520] Call trace:
[32806.134041] ___might_sleep+0x180/0x188
[32806.137980] __might_sleep+0x50/0x84
[32806.141653] __kmalloc_track_caller+0x80/0x3bc
[32806.146215] __kmalloc_reserve+0x3c/0x88
[32806.150241] pskb_expand_head+0x74/0x288
[32806.154269] rmnet_egress_handler+0xb0/0x1d8
[32806.162239] rmnet_vnd_start_xmit+0xc8/0x13c
[32806.166627] dev_hard_start_xmit+0x148/0x280
[32806.181181] sch_direct_xmit+0xa4/0x198
[32806.185125] __qdisc_run+0x1f8/0x310
[32806.188803] net_tx_action+0x23c/0x26c
[32806.192655] __do_softirq+0x220/0x408
[32806.196420] do_softirq+0x4c/0x70
Fixes: ceed73a2cf ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
RMNET RX handler was processing invalid packets that were
originally sent on the real device and were looped back via
dev_loopback_xmit(). This was detected using syzkaller.
Fixes: ceed73a2cf ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
DRM driver get the comp->clk by of_clk_get(), we only
assign NULL to comp->clk when error happened, but do
not return the error number.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Modify display driver to support connection from BLS to DPI.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
This patch adds hdmi dirver suppot for both MT2701 and MT7623.
And also support other (existing or future) chips that use
the same binding and driver.
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Different IC has different phy setting of HDMI.
This patch separates the phy hardware relate part for mt8173.
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
This patch adds dpi dirver suppot for both mt2701 and mt7623.
And also support other (existing or future) chips that use
the same binding and driver.
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Convert dpi driver to use drm_of_find_panel_or_bridge.
This changes some error messages to debug messages (in the graph core).
Graph connections are often "no connects" depending on the particular
board, so we want to avoid spurious messages. Plus the kernel is not a
DT validator.
related links:
[1] https://lkml.org/lkml/2017/2/3/716
[2] https://lkml.org/lkml/2017/2/3/719
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
different IC has different clock designed in HDMI, the factor for
calculate clock should be different. Usinng the data in of_node
to find this factor.
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
The default timing of DPI data and clock is not match.
We could adjust this bit to make them match.
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
The address of register DPI_H_FRE_CON is different in different IC.
Using of_node data to find this address.
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
After the kernel 4.4, the DRM disable flow was changed, if DPI was
disableed before CRTC, it will cause warning message as following:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c()
vblank wait timed out on crtc 0
Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O)
CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P W O 4.4.24 #1
Hardware name: Mediatek Cortex-A7 (Device Tree)
Workqueue: events drm_mode_rmfb_work_fn
[<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24)
[<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac)
[<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4)
[<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48)
[<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c)
[<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c)
[<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240)
[<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8)
[<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4)
[<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98)
[<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74)
[<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0)
[<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4)
[<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120)
[<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58)
[<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c)
[<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568)
[<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104)
[<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c)
---[ end trace 12ae5358e992abd5 ]---
so, we add refcount for DPI power on/off to protect the flow.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
The tables in the ext4 readme are not particularly space efficient in
the text or html outputs, and they're totally broken in the pdf output.
Convert them into titled paragraphs so that they render more nicely.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It turns out that the latex table formatters lay out table columns with
the exact proportional widths given in the table metadata, even if text
overflows outside the box. This was not caught during the initial
import because the HTML renderers are smart enough to fudge the table.
Fix the table column width formatting problems in the data structures
and algorithms documentation so that we don't have squashed columns.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The documentation build scripts won't build a pdf for the ext4
documentation unless explicitly called for, so ask for a separate
ext4.pdf to be generated with all the documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Return type of ext4_page_mkwrite and ext4_filemap_fault are
changed to use vm_fault_t type.
With this patch all the callers of block_page_mkwrite_return()
are changed to handle vm_fault_t. So converting the return type
of block_page_mkwrite_return() to vm_fault_t.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Variable retries is not initialized in ext4_da_write_inline_data_begin()
which can lead to nondeterministic number of retries in case we hit
ENOSPC. Initialize retries to zero as we do everywhere else.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fixes: bc0ca9df3b ("ext4: retry allocation when inline->extent conversion failed")
Cc: stable@kernel.org
Joe Stringer says:
====================
This series proposes a new helper for the BPF API which allows BPF programs to
perform lookups for sockets in a network namespace. This would allow programs
to determine early on in processing whether the stack is expecting to receive
the packet, and perform some action (eg drop, forward somewhere) based on this
information.
The series is structured roughly into:
* Misc refactor
* Add the socket pointer type
* Add reference tracking to ensure that socket references are freed
* Extend the BPF API to add sk_lookup_xxx() / sk_release() functions
* Add tests/documentation
The helper proposed in this series includes a parameter for a tuple which must
be filled in by the caller to determine the socket to look up. The simplest
case would be filling with the contents of the packet, ie mapping the packet's
5-tuple into the parameter. In common cases, it may alternatively be useful to
reverse the direction of the tuple and perform a lookup, to find the socket
that initiates this connection; and if the BPF program ever performs a form of
IP address translation, it may further be useful to be able to look up
arbitrary tuples that are not based upon the packet, but instead based on state
held in BPF maps or hardcoded in the BPF program.
Currently, access into the socket's fields are limited to those which are
otherwise already accessible, and are restricted to read-only access.
Changes since v3:
* New patch: "bpf: Reuse canonical string formatter for ctx errs"
* Add PTR_TO_SOCKET to is_ctx_reg().
* Add a few new checks to prevent mixing of socket/non-socket pointers.
* Swap order of checks in sock_filter_is_valid_access().
* Prefix register spill macros with "bpf_".
* Add acks from previous round
* Rebase
Changes since v2:
* New patch: "selftests/bpf: Generalize dummy program types".
This enables adding verifier tests for socket lookup with tail calls.
* Define the semantics of the new helpers more clearly in uAPI header.
* Fix release of caller_net when netns is not specified.
* Use skb->sk to find caller net when skb->dev is unavailable.
* Fix build with !CONFIG_NET.
* Replace ptr_id defensive coding when releasing reference state with an
internal error (-EFAULT).
* Remove flags argument to sk_release().
* Add several new assembly tests suggested by Daniel.
* Add a few new C tests.
* Fix typo in verifier error message.
Changes since v1:
* Limit netns_id field to 32 bits
* Reuse reg_type_mismatch() in more places
* Reduce the number of passes at convert_ctx_access()
* Replace ptr_id defensive coding when releasing reference state with an
internal error (-EFAULT)
* Rework 'struct bpf_sock_tuple' to allow passing a packet pointer
* Allow direct packet access from helper
* Fix compile error with CONFIG_IPV6 enabled
* Improve commit messages
Changes since RFC:
* Split up sk_lookup() into sk_lookup_tcp(), sk_lookup_udp().
* Only take references on the socket when necessary.
* Make sk_release() only free the socket reference in this case.
* Fix some runtime reference leaks:
* Disallow BPF_LD_[ABS|IND] instructions while holding a reference.
* Disallow bpf_tail_call() while holding a reference.
* Prevent the same instruction being used for reference and other
pointer type.
* Simplify locating copies of a reference during helper calls by caching
the pointer id from the caller.
* Fix kbuild compilation warnings with particular configs.
* Improve code comments describing the new verifier pieces.
* Tested by Nitin
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Document the new pointer types in the verifier and how the pointer ID
tracking works to ensure that references which are taken are later
released.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add some tests that demonstrate and test the balanced lookup/free
nature of socket lookup. Section names that start with "fail" represent
programs that are expected to fail verification; all others should
succeed.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Allow the individual program load to be invoked. This will help with
testing, where a single ELF may contain several sections, some of which
denote subprograms that are expected to fail verification, along with
some which are expected to pass verification. By allowing programs to be
iterated and individually loaded, each program can be independently
checked against its expected verification result.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
reference tracking: leak potential reference
reference tracking: leak potential reference on stack
reference tracking: leak potential reference on stack 2
reference tracking: zero potential reference
reference tracking: copy and zero potential references
reference tracking: release reference without check
reference tracking: release reference
reference tracking: release reference twice
reference tracking: release reference twice inside branch
reference tracking: alloc, check, free in one subbranch
reference tracking: alloc, check, free in both subbranches
reference tracking in call: free reference in subprog
reference tracking in call: free reference in subprog and outside
reference tracking in call: alloc & leak reference in subprog
reference tracking in call: alloc in subprog, release outside
reference tracking in call: sk_ptr leak into caller stack
reference tracking in call: sk_ptr spill into caller stack
reference tracking: allow LD_ABS
reference tracking: forbid LD_ABS while holding reference
reference tracking: allow LD_IND
reference tracking: forbid LD_IND while holding reference
reference tracking: check reference or tail call
reference tracking: release reference then tail call
reference tracking: leak possible reference over tail call
reference tracking: leak checked reference over tail call
reference tracking: mangle and release sock_or_null
reference tracking: mangle and release sock
reference tracking: access member
reference tracking: write to member
reference tracking: invalid 64-bit access of member
reference tracking: access after release
reference tracking: direct access for lookup
unpriv: spill/fill of different pointers stx - ctx and sock
unpriv: spill/fill of different pointers stx - leak sock
unpriv: spill/fill of different pointers stx - sock and ctx (read)
unpriv: spill/fill of different pointers stx - sock and ctx (write)
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Don't hardcode the dummy program types to SOCKET_FILTER type, as this
prevents testing bpf_tail_call in conjunction with other program types.
Instead, use the program type specified in the test case.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds new BPF helper functions, bpf_sk_lookup_tcp() and
bpf_sk_lookup_udp() which allows BPF programs to find out if there is a
socket listening on this host, and returns a socket pointer which the
BPF program can then access to determine, for instance, whether to
forward or drop traffic. bpf_sk_lookup_xxx() may take a reference on the
socket, so when a BPF program makes use of this function, it must
subsequently pass the returned pointer into the newly added sk_release()
to return the reference.
By way of example, the following pseudocode would filter inbound
connections at XDP if there is no corresponding service listening for
the traffic:
struct bpf_sock_tuple tuple;
struct bpf_sock_ops *sk;
populate_tuple(ctx, &tuple); // Extract the 5tuple from the packet
sk = bpf_sk_lookup_tcp(ctx, &tuple, sizeof tuple, netns, 0);
if (!sk) {
// Couldn't find a socket listening for this traffic. Drop.
return TC_ACT_SHOT;
}
bpf_sk_release(sk, 0);
return TC_ACT_OK;
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Allow helper functions to acquire a reference and return it into a
register. Specific pointer types such as the PTR_TO_SOCKET will
implicitly represent such a reference. The verifier must ensure that
these references are released exactly once in each path through the
program.
To achieve this, this commit assigns an id to the pointer and tracks it
in the 'bpf_func_state', then when the function or program exits,
verifies that all of the acquired references have been freed. When the
pointer is passed to a function that frees the reference, it is removed
from the 'bpf_func_state` and all existing copies of the pointer in
registers are marked invalid.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
An upcoming commit will need very similar copy/realloc boilerplate, so
refactor the existing stack copy/realloc functions into macros to
simplify it.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Teach the verifier a little bit about a new type of pointer, a
PTR_TO_SOCKET. This pointer type is accessed from BPF through the
'struct bpf_sock' structure.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>