Commit graph

932,869 commits

Author SHA1 Message Date
Tony Krowiak
65f06713d3 s390: vfio-ap: register matrix device with VFIO mdev framework
Registers the matrix device created by the VFIO AP device
driver with the VFIO mediated device framework.
Registering the matrix device will create the sysfs
structures needed to create mediated matrix devices
each of which will be used to configure the AP matrix
for a guest and connect it to the VFIO AP device driver.

Registering the matrix device with the VFIO mediated device
framework will create the following sysfs structures:

/sys/devices/vfio_ap/matrix/
...... [mdev_supported_types]
......... [vfio_ap-passthrough]
............ create

To create a mediated device for the AP matrix device, write a UUID
to the create file:

	uuidgen > create

A symbolic link to the mediated device's directory will be created in the
devices subdirectory named after the generated $uuid:

/sys/devices/vfio_ap/matrix/
...... [mdev_supported_types]
......... [vfio_ap-passthrough]
............ [devices]
............... [$uuid]

A symbolic link to the mediated device will also be created
in the vfio_ap matrix's directory:

/sys/devices/vfio_ap/matrix/[$uuid]

Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <20180925231641.4954-6-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-26 20:45:51 +02:00
Tony Krowiak
1fde573413 s390: vfio-ap: base implementation of VFIO AP device driver
Introduces a new AP device driver. This device driver
is built on the VFIO mediated device framework. The framework
provides sysfs interfaces that facilitate passthrough
access by guests to devices installed on the linux host.

The VFIO AP device driver will serve two purposes:

1. Provide the interfaces to reserve AP devices for exclusive
   use by KVM guests. This is accomplished by unbinding the
   devices to be reserved for guest usage from the zcrypt
   device driver and binding them to the VFIO AP device driver.

2. Implements the functions, callbacks and sysfs attribute
   interfaces required to create one or more VFIO mediated
   devices each of which will be used to configure the AP
   matrix for a guest and serve as a file descriptor
   for facilitating communication between QEMU and the
   VFIO AP device driver.

When the VFIO AP device driver is initialized:

* It registers with the AP bus for control of type 10 (CEX4
  and newer) AP queue devices. This limitation was imposed
  due to:

  1. A desire to keep the code as simple as possible;

  2. Some older models are no longer supported by the kernel
     and others are getting close to end of service.

  3. A lack of older systems on which to test older devices.

  The probe and remove callbacks will be provided to support
  the binding/unbinding of AP queue devices to/from the VFIO
  AP device driver.

* Creates a matrix device, /sys/devices/vfio_ap/matrix,
  to serve as the parent of the mediated devices created, one
  for each guest, and to hold the APQNs of the AP devices bound to
  the VFIO AP device driver.

Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-26 20:45:51 +02:00
Tony Krowiak
e585b24aeb KVM: s390: refactor crypto initialization
This patch refactors the code that initializes and sets up the
crypto configuration for a guest. The following changes are
implemented via this patch:

1. Introduces a flag indicating AP instructions executed on
   the guest shall be interpreted by the firmware. This flag
   is used to set a bit in the guest's state description
   indicating AP instructions are to be interpreted.

2. Replace code implementing AP interfaces with code supplied
   by the AP bus to query the AP configuration.

Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <20180925231641.4954-4-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-26 20:45:20 +02:00
YueHaibing
0a71515665 net: faraday: fix return type of ndo_start_xmit function
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 10:18:08 -07:00
YueHaibing
6323d57f33 net: smsc: fix return type of ndo_start_xmit function
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 10:15:17 -07:00
zhong jiang
880e1b2111 net: liquidio: list usage cleanup
Trival cleanup, list_move_tail will implement the same function that
list_del() + list_add_tail() will do. hence just replace them.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 10:12:10 -07:00
Bjorn Andersson
ef73c22fa0 remoteproc: qcom: Rename Hexagon v5 modem driver
The qcom_q6v5_pil implements support for the self-authenticating modem
subsystem. With the introduction of other q6v5 based non-TZ based
remoteproc driver the current name is cause for confusion, so rename it
to be more specific.

No functional change.

Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-09-26 10:11:37 -07:00
zhong jiang
631e871edc net: qed: list usage cleanup
Trival cleanup, list_move_tail will implement the same function that
list_del() + list_add_tail() will do. hence just replace them.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 10:11:36 -07:00
Bjorn Andersson
9e004f9716 remoteproc: qcom: Rename Hexagon v5 PAS driver
The Hexagon v5 ADSP driver is used for more than only the ADSP and
there's an upcoming non-PAS ADSP PIL for SDM845, so rename the driver to
qcom_q6v5_pas in order to better suite this.

Cc: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-09-26 10:11:20 -07:00
Bjorn Andersson
d5269c4553 remoteproc: qcom: q6v5: Propagate EPROBE_DEFER
In the case that the interrupts fail to result because of the
interrupt-controller not yet being registered the
platform_get_irq_byname() call will fail with -EPROBE_DEFER, but passing
this into devm_request_threaded_irq() will result in -EINVAL being
returned, the driver is therefor not reprobed later.

Fixes: 3b415c8fb2 ("remoteproc: q6v5: Extract common resource handling")
Cc: stable@vger.kernel.org
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-09-26 10:10:11 -07:00
David S. Miller
30b0594a3e Merge branch 'net-bridge-convert-bool-options-to-bits'
Nikolay Aleksandrov says:

====================
net: bridge: convert bool options to bits

A lot of boolean bridge options have been added around the net_bridge
structure resulting in holes and more importantly different cache lines
that need to be fetched in the fast path. This set moves all of those
to bits in a bitfield which resides in a hot cache line thus reducing
the size of net_bridge, the number of holes and the number of cache
lines needed for the fast path.
The set is also sent in preparation for new boolean options to avoid
spreading them in the structure and making new holes.
One nice side-effect is that we avoid potential race conditions by using
the bitops since some of the options were bits being directly set in
parallel risking hard to debug issues (has_ipv6_addr).

Before:
 size: 1184, holes: 8, sum holes: 30
After:
 size: 1160, holes: 3, sum holes: 7

Patch 01 is a trivial style fix
Patch 02 adds the new options bitfield and converts the vlan boolean
         options to bits
Patches 03-08 convert the rest of the boolean options to bits
Patch 09 re-arranges a few fields in net_bridge to further reduce size

v2: patch 09: remove the comment about offload_fwd_mark in net_bridge and
    leave it where it is now, thanks to Ido for spotting it
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 10:04:23 -07:00
Nikolay Aleksandrov
35750b0bca net: bridge: pack net_bridge better
Further reduce the size of net_bridge with 8 bytes and reduce the number of
holes in it:
 Before: holes: 5, sum holes: 15
 After: holes: 3, sum holes: 7

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 10:04:23 -07:00
Nikolay Aleksandrov
3341d91702 net: bridge: convert mtu_set_by_user to a bit
Convert the last remaining bool option to a bit thus reducing the overall
net_bridge size further by 8 bytes.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 10:04:23 -07:00
Nikolay Aleksandrov
c69c2cd444 net: bridge: convert neigh_suppress_enabled option to a bit
Convert the neigh_suppress_enabled option to a bit.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 10:04:23 -07:00
Nikolay Aleksandrov
675779adbf net: bridge: convert mcast options to bits
This patch converts the rest of the mcast options to bits. It also packs
the mcast options a little better by moving multicast_mld_version to an
existing hole, reducing the net_bridge size by 8 bytes.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 10:04:23 -07:00
Nikolay Aleksandrov
13cefad2f2 net: bridge: convert and rename mcast disabled
Convert mcast disabled to an option bit and while doing so convert the
logic to check if multicast is enabled instead. That is make the logic
follow the option value - if it's set then mcast is enabled and vice versa.
This avoids a few confusing places where we inverted the value that's being
set to follow the mcast_disabled logic.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 10:04:23 -07:00
Nikolay Aleksandrov
be3664a038 net: bridge: convert group_addr_set option to a bit
Convert group_addr_set internal bridge opt to a bit.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 10:04:23 -07:00
Nikolay Aleksandrov
8df3510f28 net: bridge: convert nf call options to bits
No functional change, convert of nf_call_[ip|ip6|arp]tables to bits.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 10:04:23 -07:00
Nikolay Aleksandrov
ae75767ec2 net: bridge: add bitfield for options and convert vlan opts
Bridge options have usually been added as separate fields all over the
net_bridge struct taking up space and ending up in different cache lines.
Let's move them to a single bitfield to save up space and speedup lookups.
This patch adds a simple API for option modifying and retrieving using
bitops and converts the first user of the API - the bridge vlan options
(vlan_enabled and vlan_stats_enabled).

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 10:04:22 -07:00
Nikolay Aleksandrov
1c1cb6d032 net: bridge: make struct opening bracket consistent
Currently we have a mix of opening brackets on new lines and on the same
line, let's move them all on the same line.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 10:04:22 -07:00
Suzuki K Poulose
70a39be676 arm64: dts: msm8916: Update coresight bindings for hardware ports
Switch to updated coresight bindings for hw ports

Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-09-26 11:59:36 -05:00
David S. Miller
37ac5db6e6 Merge branch 's390-net-next'
Julian Wiedmann says:

====================
s390/net: updates 2018-09-26

please apply one more series of cleanups and small improvements for qeth
to net-next. Note that one patch needs to touch both af_iucv and qeth, in
order to untangle their receive paths.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 09:56:08 -07:00
Julian Wiedmann
91cc98f51e s390/qeth: remove duplicated carrier state tracking
The netdevice is always available, apply any carrier state changes to it
without caching them.
On a STARTLAN event (ie. carrier-up), defer updating the state to
qeth_core_hardsetup_card() in the subsequent recovery action.

Also remove the carrier-state checks from the xmit routines. Stopping
transmission on carrier-down is the responsibility of upper-level code
(eg see dev_direct_xmit()).

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 09:56:08 -07:00
Julian Wiedmann
d782d80f36 s390/qeth: clean up drop conditions for received cmds
If qeth_check_ipa_data() consumed an event, there's no point in
processing it further. So drop it early, and make the surrounding code
a tiny bit more readable.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 09:56:07 -07:00
Julian Wiedmann
d19b93f40e s390/qeth: re-indent qeth_check_ipa_data()
Pull one level of checking up into qeth_send_control_data_cb(), and
clean up an else-after-return. No functional change.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 09:56:07 -07:00
Julian Wiedmann
68bba11643 s390/qeth: consume local address events
We have no code that is waiting for these events, so just drop them when
they arrive.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 09:56:07 -07:00
Julian Wiedmann
6585ac4e5d s390/qeth: remove various redundant code
1. tracing iob->rc makes no sense when it hasn't been modified by the
   callback,
2. the qeth_dbf_list is declared with LIST_HEAD, which also initializes
   the list,
3. the ccwgroup core only calls the thaw/restore callbacks if the gdev
   is online, so we don't have to check for it again.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 09:56:07 -07:00
Julian Wiedmann
8d908eb045 s390/qeth: remove CARD_FROM_CDEV helper
The cdev-to-card translation walks through two layers of drvdata,
with no locking or refcounting (where eg. the ccwgroup core only
accesses a cdev's drvdata while holding the ccwlock).

This might be safe for now, but any careless usage of the helper has the
potential for subtle races and use-after-free's. Luckily there's only
one occurrence where we _really_ need it (in qeth_irq()), for any other
user we can just pass through an appropriate card pointer.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 09:56:07 -07:00
Julian Wiedmann
8f6637b878 s390/qeth: pass card pointer in iob callback
This allows us to remove the CARD_FROM_CDEV calls in the iob callbacks.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 09:56:07 -07:00
Julian Wiedmann
6a3123d076 s390/qeth: re-use qeth_notify_skbs()
When not using the CQ, this allows us avoid the second skb queue walk
in qeth_release_skbs().

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 09:56:07 -07:00
Julian Wiedmann
5a5312bdba s390/qeth: remove additional skb refcount
This was presumably left over from back when qeth recursed into
dev_queue_xmit().

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 09:56:07 -07:00
Julian Wiedmann
dc149e3764 s390/qeth: replace open-coded skb_queue_walk()
To match the use of __skb_queue_purge(), also make the skb's enqueue in
qeth_fill_buffer() lockless.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 09:56:07 -07:00
Julian Wiedmann
cd11d11286 net/af_iucv: locate IUCV header via skb_network_header()
This patch attempts to untangle the TX and RX code in qeth from
af_iucv's respective HiperTransport path:
On the TX side, pointing skb_network_header() at the IUCV header
means that qeth_l3_fill_af_iucv_hdr() no longer needs a magical offset
to access the header.
On the RX side, qeth pulls the (fake) L2 header off the skb like any
normal ethernet driver would. This makes working with the IUCV header
in af_iucv easier, since we no longer have to assume a fixed skb layout.

While at it, replace the open-coded length checks in af_iucv's RX path
with pskb_may_pull().

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 09:56:07 -07:00
Julian Wiedmann
a2eb0ad50c s390/qeth: on gdev release, reset drvdata
qeth_core_probe_device() sets the gdev's drvdata, but doesn't reset it
on a subsequent error. Move the (re-)setting around a bit, so that it
happens symmetrically on allocating/freeing the qeth_card struct.

This is no actual problem, as the ccwgroup core will discard the gdev
on a probe error. But from qeth's perspective the gdev is an external
resource, so it's best to manage it cleanly.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 09:56:07 -07:00
Julian Wiedmann
c1a935f6ec s390/qeth: fix discipline unload after setup error
Device initialization code usually first loads a subdriver
(via qeth_core_load_discipline()), and then runs its setup() callback.
If this fails, it rolls back the load via qeth_core_free_discipline().

qeth_core_free_discipline() expects the options.layer attribute to be
initialized, but on error in setup() that's currently not the case.
Resulting in misbalanced symbol_put() calls.

Fix this by setting options.layer when loading the subdriver.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 09:56:07 -07:00
Julian Wiedmann
a70fee3b0f s390/qeth: use DEFINE_MUTEX for qeth_mod_mutex
Consolidate declaration and initialization of a static variable.
While at it reduce its scope in qeth_core_load_discipline(), and simplify
the return logic accordingly.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 09:56:07 -07:00
Julian Wiedmann
4fda335476 s390/qeth: convert layer attribute to enum
While the raw values are fixed due to their use in a sysfs attribute,
we can still use the proper QETH_DISCIPLINE_* enum within the driver.

Also move the initialization into qeth_set_initial_options(), along with
all other user-configurable fields.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 09:56:07 -07:00
Gustavo A. R. Silva
7c968791f7 video/fbdev/stifb: Fix spelling mistake in fall-through annotation
Replace "fall though" with a proper "fall through" annotation.

This fix is part of the ongoing efforts to enabling
-Wimplicit-fallthrough

Addresses-Coverity-ID: 402013 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-09-26 18:50:54 +02:00
Brian Masney
703e699dbe ARM: dts: qcom-msm8974: change invalid flag IRQ NONE to valid value
The following commits used IRQ_TYPE_NONE since that matched what was
already in the file and I do not have access to the datasheets for
these devices. After these patches were submitted, commit dcf1450114
("ARM: dts: qcom-msm8974: change invalid flag IRQ NONE to valid value")
changed all of these values to IRQ_TYPE_LEVEL_HIGH. This patch corrects
the IRQ type for these two commits:

commit bd93925075 ("ARM: dts: qcom: msm8974-hammerhead: add device
tree bindings for ALS / proximity")

commit fe8d81fe7d ("ARM: dts: qcom: msm8974-hammerhead: add device
tree bindings for mpu6515")

Prior to these patches, I was having issues with the bmp280 sensor
returning temperature / pressure skipped errors, however these errors
have gone away with these patches.

Patches were tested on a LG Nexus 5 (hammerhead) phone.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-09-26 11:42:27 -05:00
Adam Jackson
676709b1bc uvesafb: Fix URLs in the documentation
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-09-26 18:11:23 +02:00
Hans de Goede
cf7389b809 efifb: BGRT: Add nobgrt option
In some setups restoring the BGRT logo is undesirable, allow passing
video=efifb:nobgrt on the kernel commandline to disable it.

Reported-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-09-26 18:11:22 +02:00
Tomi Valkeinen
1bafcbf59f fbdev/omapfb: fix omapfb_memory_read infoleak
OMAPFB_MEMORY_READ ioctl reads pixels from the LCD's memory and copies
them to a userspace buffer. The code has two issues:

- The user provided width and height could be large enough to overflow
  the calculations
- The copy_to_user() can copy uninitialized memory to the userspace,
  which might contain sensitive kernel information.

Fix these by limiting the width & height parameters, and only copying
the amount of data that we actually received from the LCD.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: stable@vger.kernel.org
Cc: security@kernel.org
Cc: Will Deacon <will.deacon@arm.com>
Cc: Jann Horn <jannh@google.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-09-26 18:11:22 +02:00
Lubomir Rintel
d85536cde9 pxa168fb: prepare the clock
Add missing prepare/unprepare operations for fbi->clk,
this fixes following kernel warning:

  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:874 clk_core_enable+0x2c/0x1b0
  Enabling unprepared disp0_clk
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper Not tainted 4.18.0-rc8-00032-g02b43ddd4f21-dirty #25
  Hardware name: Marvell MMP2 (Device Tree Support)
  [<c010f7cc>] (unwind_backtrace) from [<c010cc6c>] (show_stack+0x10/0x14)
  [<c010cc6c>] (show_stack) from [<c011dab4>] (__warn+0xd8/0xf0)
  [<c011dab4>] (__warn) from [<c011db10>] (warn_slowpath_fmt+0x44/0x6c)
  [<c011db10>] (warn_slowpath_fmt) from [<c043898c>] (clk_core_enable+0x2c/0x1b0)
  [<c043898c>] (clk_core_enable) from [<c0439ec8>] (clk_core_enable_lock+0x18/0x2c)
  [<c0439ec8>] (clk_core_enable_lock) from [<c0436698>] (pxa168fb_probe+0x464/0x6ac)
  [<c0436698>] (pxa168fb_probe) from [<c04779a0>] (platform_drv_probe+0x48/0x94)
  [<c04779a0>] (platform_drv_probe) from [<c0475bec>] (driver_probe_device+0x328/0x470)
  [<c0475bec>] (driver_probe_device) from [<c0475de4>] (__driver_attach+0xb0/0x124)
  [<c0475de4>] (__driver_attach) from [<c0473c38>] (bus_for_each_dev+0x64/0xa0)
  [<c0473c38>] (bus_for_each_dev) from [<c0474ee0>] (bus_add_driver+0x1b8/0x230)
  [<c0474ee0>] (bus_add_driver) from [<c0476a20>] (driver_register+0xac/0xf0)
  [<c0476a20>] (driver_register) from [<c0102dd4>] (do_one_initcall+0xb8/0x1f0)
  [<c0102dd4>] (do_one_initcall) from [<c0b010a0>] (kernel_init_freeable+0x294/0x2e0)
  [<c0b010a0>] (kernel_init_freeable) from [<c07e9eb8>] (kernel_init+0x8/0x10c)
  [<c07e9eb8>] (kernel_init) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
  Exception stack(0xd008bfb0 to 0xd008bff8)
  bfa0:                                     00000000 00000000 00000000 00000000
  bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
  ---[ end trace c0af40f9e2ed7cb4 ]---

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
[b.zolnierkie: enhance patch description a bit]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-09-26 18:11:22 +02:00
Marc Dietrich
ebea2a43fd ARM: dts: paz00: fix wakeup gpio keycode
The power key is controlled solely by the EC, which only tiggeres this
gpio after wakeup.
Fixes immediately return to suspend after wake from LP1.

Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-09-26 17:29:41 +02:00
Dmitry Osipenko
5ac93f8109 drm/tegra: Detach devices from IOMMU DMA domain on arm32
All Tegra DRM devices are getting attached to an implicit IOMMU DMA
domain if CONFIG_ARM_DMA_USE_IOMMU=y. Since Tegra DRM driver manages IOMMU
by itself, the devices must be detached from the implicit domain using
arch-specific IOMMU-API. Note that this works only for arm32 and not for
arm64, which will remain broken if CONFIG_IOMMU_DMA is enabled.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-09-26 17:24:02 +02:00
Arnd Bergmann
ba61ab1a23 arm64: zynqmp: SoC changes for v4.20
- Adding firmware API for SoC with debugfs interface
   Firmware driver communicates to Platform Management Unit (PMU) by using
   SMC instructions routed to Arm Trusted Firmware (ATF). Initial version
   adds support for base firmware driver with query and clock APIs.
 
   EEMI spec is available here:
   https://www.xilinx.com/support/documentation/user_guides/ug1200-eemi-api.pdf
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlurMMcACgkQykllyylKDCGE6gCfY2tOaxQCcBUzmh5ZXSUiQdeM
 BA8AoJgu8dBLcD/U9S5+lDlCEMY26eSh
 =tgPT
 -----END PGP SIGNATURE-----

Merge tag 'zynqmp-soc-for-v4.20-v2' of https://github.com/Xilinx/linux-xlnx into next/drivers

arm64: zynqmp: SoC changes for v4.20

- Adding firmware API for SoC with debugfs interface
  Firmware driver communicates to Platform Management Unit (PMU) by using
  SMC instructions routed to Arm Trusted Firmware (ATF). Initial version
  adds support for base firmware driver with query and clock APIs.

  EEMI spec is available here:
  https://www.xilinx.com/support/documentation/user_guides/ug1200-eemi-api.pdf

* tag 'zynqmp-soc-for-v4.20-v2' of https://github.com/Xilinx/linux-xlnx:
  firmware: xilinx: Add debugfs for query data API
  firmware: xilinx: Add debugfs interface
  firmware: xilinx: Add clock APIs
  firmware: xilinx: Add query data API
  firmware: xilinx: Add Zynqmp firmware driver
  dt-bindings: firmware: Add bindings for ZynqMP firmware

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-26 17:18:53 +02:00
Arnd Bergmann
8fe3c0612c Merge tag 'zynq-soc-for-v4.20' of https://github.com/Xilinx/linux-xlnx into next/soc
ARM: Xilinx Zynq SoC patches for v4.20

- Convert to using %pOFn instead of device_node.name in slcr driver

* tag 'zynq-soc-for-v4.20' of https://github.com/Xilinx/linux-xlnx:
  ARM: zynq: Convert to using %pOFn instead of device_node.name

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-26 17:18:26 +02:00
Dmitry Osipenko
e31c8ea5af gpu: host1x: Detach Host1x from IOMMU DMA domain on arm32
Host1x is getting attached to an implicit IOMMU DMA domain if
CONFIG_ARM_DMA_USE_IOMMU=y. Since Host1x driver manages IOMMU by
itself, Host1x device must be detached from the implicit domain using
arch-specific IOMMU-API.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-09-26 17:11:14 +02:00
Arnd Bergmann
1abf47edb3 ARM: dts: zynq: DT changes for v4.20
- Fix DTS spi/i2c warnings for zc702/zc770 boards
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlurMyYACgkQykllyylKDCGtDACeMU1f8m2RXew0Y2pLJVN/teJM
 d1oAnjhkULs+DsJXj2pPJpkbYqnqeTS1
 =g3ss
 -----END PGP SIGNATURE-----

Merge tag 'zynq-dt-for-v4.20' of https://github.com/Xilinx/linux-xlnx into next/dt

ARM: dts: zynq: DT changes for v4.20

- Fix DTS spi/i2c warnings for zc702/zc770 boards

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-26 17:10:05 +02:00
Krzysztof Kozlowski
06d561ca0f ARM: tegra: tegra20: Fix mixed tabs-spaces indentation
Fix indentation and alignment when spaces were used instead of tabs.
This fixes checkpatch errors like:

    ERROR: code indent should use tabs where possible
    #306: FILE: arch/arm/boot/dts/tegra20-paz00.dts:306:
    +^I^I         <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;$

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-09-26 17:07:47 +02:00