Commit graph

932,869 commits

Author SHA1 Message Date
Brian Norris
11799564fc mfd: cros_ec: Retry commands when EC is known to be busy
Commit 001dde9400 ("mfd: cros ec: spi: Fix "in progress" error
signaling") pointed out some bad code, but its analysis and conclusion
was not 100% correct.

It *is* correct that we should not propagate result==EC_RES_IN_PROGRESS
for transport errors, because this has a special meaning -- that we
should follow up with EC_CMD_GET_COMMS_STATUS until the EC is no longer
busy. This is definitely the wrong thing for many commands, because
among other problems, EC_CMD_GET_COMMS_STATUS doesn't actually retrieve
any RX data from the EC, so commands that expected some data back will
instead start processing junk.

For such commands, the right answer is to either propagate the error
(and return that error to the caller) or resend the original command
(*not* EC_CMD_GET_COMMS_STATUS).

Unfortunately, commit 001dde9400 forgets a crucial point: that for
some long-running operations, the EC physically cannot respond to
commands any more. For example, with EC_CMD_FLASH_ERASE, the EC may be
re-flashing its own code regions, so it can't respond to SPI interrupts.
Instead, the EC prepares us ahead of time for being busy for a "long"
time, and fills its hardware buffer with EC_SPI_PAST_END. Thus, we
expect to see several "transport" errors (or, messages filled with
EC_SPI_PAST_END). So we should really translate that to a retryable
error (-EAGAIN) and continue sending EC_CMD_GET_COMMS_STATUS until we
get a ready status.

IOW, it is actually important to treat some of these "junk" values as
retryable errors.

Together with commit 001dde9400, this resolves bugs like the
following:

1. EC_CMD_FLASH_ERASE now works again (with commit 001dde9400, we
   would abort the first time we saw EC_SPI_PAST_END)
2. Before commit 001dde9400, transport errors (e.g.,
   EC_SPI_RX_BAD_DATA) seen in other commands (e.g.,
   EC_CMD_RTC_GET_VALUE) used to yield junk data in the RX buffer; they
   will now yield -EAGAIN return values, and tools like 'hwclock' will
   simply fail instead of retrieving and re-programming undefined time
   values

Fixes: 001dde9400 ("mfd: cros ec: spi: Fix "in progress" error signaling")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-23 06:59:00 +01:00
Fabio Estevam
ce9c28ca6c dmaengine: imx-dma: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-23 11:10:32 +05:30
Fabio Estevam
d9617a3f2b dmaengine: mxs-dma: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-23 11:10:31 +05:30
Fabio Estevam
c01faaca10 dmaengine: imx-sdma: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-23 11:10:31 +05:30
Fabio Estevam
e45e778f07 clocksource/drivers/mxs_timer: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-05-23 07:39:09 +02:00
Fabio Estevam
c8437a6cab clocksource/drivers/timer-imx-tpm: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-05-23 07:39:01 +02:00
Fabio Estevam
c53bb60588 clocksource/drivers/timer-imx-gpt: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-05-23 07:38:52 +02:00
Fabio Estevam
377873c150 clocksource/drivers/timer-imx-gpt: Remove outdated file path
imx gpt timer driver has been moved from arch/arm/mach-imx to
drivers/clocksource/ a long time ago, so remove the reference
to the old file path.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-05-23 07:38:41 +02:00
Vincent Chen
a30e7d1e37 nds32: Fix compiler warning, Wstringop-overflow, in vdso.c
Getting a compiler warning, Wstringop-overflow, in
arch/nds32/kernel/vdso.c when kernel is built by gcc-8. Declaring
vdso_start and vdso_end as a pointer to fix this compiler warning.

Signed-off-by: Vincent Chen <vincentc@andestech.com>
Reviewed-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23 13:26:22 +08:00
Vincent Chen
aaaaba5750 nds32: Disable local irq before calling cpu_dcache_wb_page in copy_user_highpage
In order to ensure that all data in source page has been written back
to memory before copy_page, the local irq shall be disabled before
calling cpu_dcache_wb_page(). In addition, removing unneeded page
invalidation for 'to' page.

Signed-off-by: Vincent Chen <vincentc@andestech.com>
Reviewed-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23 13:26:22 +08:00
Vincent Chen
5b9f95699b nds32: Flush the cache of the page at vmaddr instead of kaddr in flush_anon_page
According to Documentation/cachetlb.txt, the cache of the page at vmaddr
shall be flushed in flush_anon_page instead of the cache of the page at
page_address(page).

Signed-off-by: Vincent Chen <vincentc@andestech.com>
Reviewed-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23 13:26:22 +08:00
Vincent Chen
efcc4ea872 nds32: Correct flush_dcache_page function
1. Disable local irq before d-cache write-back and invalidate.
   The cpu_dcache_wbinval_page function is composed of d-cache
write-back and invalidate. If the local irq is enabled when calling
cpu_dcache_wbinval_page, the content of d-cache is possibly updated
between write-back and invalidate. In this case, the updated data will
be dropped due to the following d-cache invalidation. Therefore, we
disable the local irq before calling cpu_dcache_wbinval_page.

2. Correct the data write-back for page aliasing case.
   Only the page whose (page->index << PAGE_SHIFT) is located at the
same page color as page_address(page) needs to execute data write-back
in flush_dcache_page function.

Signed-off-by: Vincent Chen <vincentc@andestech.com>
Reviewed-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23 13:26:22 +08:00
Nickhu
1613de8a78 nds32: Fix the unaligned access handler
If the kernel config 'CONFIG_ALIGNMENT_TRAP' and the file
'/proc/sys/nds32/unaligned_access/enable' are set, the kernel
unaligned access handler does not handle correctly when the
value of immediate field is negative. This commit fixes the
unaligned access handler in kernel.

Signed-off-by: Nickhu <nickhu@andestech.com>
Reviewed-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23 13:26:22 +08:00
Nickhu
b3a75846a5 nds32: Renaming the file for unaligned access
Change the name of the file '/proc/sys/nds32/unaligned_acess'
to '/proc/sys/nds32/unaligned_access'

Signed-off-by: Nickhu <nickhu@andestech.com>
Reviewed-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23 13:26:22 +08:00
Greentime Hu
abb90a24ea nds32: To fix a cache inconsistency issue by setting correct cacheability of NTC
The nds32 architecture will use physical memory when interrupt or
exception comes and it will use the setting of NTC0-4. The original
implementation didn't consider the DRAM start address may start from 1GB,
2GB or 3GB to cause this issue. It will write the data to DRAM if it is
running in physical address however kernel will read the data with
virtaul address through data cache. In this case, the data of DRAM is
latest.

This fix will set the correct cacheability to let kernel write/read the
latest data in cache instead of DRAM.

Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23 13:26:22 +08:00
Greentime Hu
8769c22349 nds32: To refine readability of INT_MASK_INITAIAL_VAL
Refine readability of INT_MASK_INITAIAL_VAL with meaningful macro instead
of magic number.

Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23 13:26:21 +08:00
Greentime Hu
3ff2228dce nds32: Fix the virtual address may map too much range by tlbop issue.
We use tlbop to map virtual address in the first beginning, however it
may map too much if DRAM size is not that big. We have to invalidate the
mapping when the page table is created.

Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23 13:26:21 +08:00
Greentime Hu
b3b112bb06 nds32: Fix the allmodconfig build. To make sure CONFIG_CPU_LITTLE_ENDIAN is default y
This way we can build kernel with CONFIG_CPU_LITTLE_ENDIAN=y. Build allmodconfig
and allnoconfig are available too. It also fixes the endian mismatch issue
because AFLAGS and LDFLAGS is not passed correctly.

Signed-off-by: Vincent Ren-Wei Chen <vincentc@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23 13:26:21 +08:00
Greentime Hu
c8c20f9c16 nds32: Fix build failed because arch_trace_hardirqs_off is changed to trace_hardirqs_off.
It broke the 'allmodconfig' build when CONFIG_TRACE_IRQFLAGS is enabled.

Signed-off-by: Nick Chun-Ming Hu <nickhu@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2018-05-23 13:26:21 +08:00
Greentime Hu
bb912671e3 nds32: Fix the unknown type u8 issue.
It broke the 'allmodconfig' build.
We need to include <linux/types.h> to make sure the type is defined
before using it.

Signed-off-by: Greentime Hu <greentime@andestech.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2018-05-23 13:26:21 +08:00
Greentime Hu
e3f4624388 nds32: Fix the symbols undefined issue by exporting them.
It broke the 'allmodconfig' build.
  LD      vmlinux
  SYSMAP  System.map
  Building modules, stage 2.
  MODPOST 5028 modules
ERROR: "flush_dcache_page" [net/sunrpc/xprtrdma/rpcrdma.ko] undefined!
ERROR: "empty_zero_page" [net/ceph/libceph.ko] undefined!
ERROR: "save_stack_trace" [kernel/backtracetest.ko] undefined!
ERROR: "clear_page" [fs/ocfs2/dlm/ocfs2_dlm.ko] undefined!
ERROR: "copy_page" [fs/nilfs2/nilfs2.ko] undefined!
...

Signed-off-by: Greentime Hu <greentime@andestech.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2018-05-23 13:26:20 +08:00
Greentime Hu
03969d0b3a nds32: Fix xfs_buf built failed by export invalidate_kernel_vmap_range and flush_kernel_vmap_range
It broke the 'allmodconfig' build.
fs/xfs/xfs_buf.c: In function 'xfs_buf_bio_end_io':
fs/xfs/xfs_buf.c:1242:3: error: implicit declaration of function 'invalidate_kernel_vmap_range' [-Werror=implicit-function-declaration]
   invalidate_kernel_vmap_range(bp->b_addr, xfs_buf_vmap_len(bp));
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/xfs/xfs_buf.c: In function 'xfs_buf_ioapply_map':
fs/xfs/xfs_buf.c:1312:4: error: implicit declaration of function 'flush_kernel_vmap_range' [-Werror=implicit-function-declaration]
    flush_kernel_vmap_range(bp->b_addr,
    ^~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Greentime Hu <greentime@andestech.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2018-05-23 13:26:20 +08:00
Greentime Hu
8cedb78fdf nds32: Fix drivers/gpu/drm/udl/udl_fb.c building error by defining PAGE_SHARED
It broke the 'allmodconfig' build.
drivers/gpu/drm/udl/udl_fb.c: In function 'udl_fb_mmap':
drivers/gpu/drm/udl/udl_fb.c:183:52: error: 'PAGE_SHARED' undeclared (first use in this function)
   if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
                                                    ^~~~~~~~~~~
drivers/gpu/drm/udl/udl_fb.c:183:52: note: each undeclared identifier is reported only once for each function it appears in
make[4]: *** [drivers/gpu/drm/udl/udl_fb.o] Error 1

Signed-off-by: Greentime Hu <greentime@andestech.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2018-05-23 13:26:20 +08:00
Greentime Hu
81560e011a nds32: Fix building error of crypto/xor.c by adding xor.h
When I compiled with allmodconfig, it caused this building failed.
crypto/xor.c:25:21: fatal error: asm/xor.h: No such file or directory
 #include <asm/xor.h>
                     ^
compilation terminated.

Signed-off-by: Greentime Hu <greentime@andestech.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2018-05-23 13:26:20 +08:00
Greentime Hu
6ca4b262db nds32: Fix building error when CONFIG_FREEZE is enabled.
To include kernel/Kconfig.freezer to make sure the dependency between
CONFIG_CGROUP_FREEZER and CONFIG_FREEZER

It will cause building error when I make allmodconfig.

kernel/cgroup/freezer.c: In function 'freezer_css_online':
kernel/cgroup/freezer.c:116:15: error: 'system_freezing_cnt' undeclared (first use in this function)
   atomic_inc(&system_freezing_cnt);
               ^~~~~~~~~~~~~~~~~~~
kernel/cgroup/freezer.c:116:15: note: each undeclared identifier is reported only once for each function it appears in
kernel/cgroup/freezer.c: In function 'freezer_css_offline':
kernel/cgroup/freezer.c:137:15: error: 'system_freezing_cnt' undeclared (first use in this function)
   atomic_dec(&system_freezing_cnt);
               ^~~~~~~~~~~~~~~~~~~
kernel/cgroup/freezer.c: In function 'freezer_attach':
kernel/cgroup/freezer.c:181:4: error: implicit declaration of function 'freeze_task' [-Werror=implicit-function-declaration]
    freeze_task(task);
    ^~~~~~~~~~~
kernel/cgroup/freezer.c: In function 'freezer_apply_state':
kernel/cgroup/freezer.c:360:16: error: 'system_freezing_cnt' undeclared (first use in this function)
    atomic_inc(&system_freezing_cnt);
                ^~~~~~~~~~~~~~~~~~~

Signed-off-by: Greentime Hu <greentime@andestech.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2018-05-23 13:26:20 +08:00
Greentime Hu
aeaa7af744 nds32: lib: To use generic lib instead of libgcc to prevent the symbol undefined issue.
We can use the generic lib to fix these error because the symbol of
libgcc in toolchain is not exported.

ERROR: "__ucmpdi2" [fs/xfs/xfs.ko] undefined!
ERROR: "__ashrdi3" [fs/xfs/xfs.ko] undefined!
ERROR: "__lshrdi3" [fs/xfs/xfs.ko] undefined!
ERROR: "__ashldi3" [fs/ntfs/ntfs.ko] undefined!
...

Signed-off-by: Greentime Hu <greentime@andestech.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2018-05-23 13:26:20 +08:00
Bjorn Andersson
57fc67ef0d arm64: dts: qcom: msm8996: Add ufs related nodes
Add the UFS QMP phy node and the UFS host controller node, now that we
have working UFS and the necessary clocks in place.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-22 23:29:03 -05:00
Thierry Escande
242579dd08 arm64: dts: msm8996: fix gic_irq_domain_translate warnings
Remove the usage of IRQ_TYPE_NONE to fix loud warnings from
patch (83a86fbb5b "irqchip/gic: Loudly complain about
the use of IRQ_TYPE_NONE").

Signed-off-by: Thierry Escande <thierry.escande@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-22 23:29:02 -05:00
Douglas Anderson
54d7a20d61 arm64: dts: qcom: sdm845: Sort nodes in the soc by address
This is pure-churn and should be a no-op.  I'm doing it in the hopes
of reducing merge conflicts.  When things are sorted in a sane way
(and by base address seems sane) then it's less likely that future
patches will cause merge conflicts.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-22 23:29:02 -05:00
Douglas Anderson
2da5239816 arm64: dts: qcom: sdm845: Sort nodes in the reserved mem by address
Let's keep the reserved-memory node tidy and neat and keep it sorted
by address.  This should have no functional change.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-22 23:29:01 -05:00
Douglas Anderson
b1643b2734 arm64: dts: sdm845: Add command DB node
Add command DB node based on the bindings example.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-22 23:29:01 -05:00
Douglas Anderson
5ea3939cf5 arm64: dts: sdm845: Fix xo_board clock name and speed
The RPMh clock driver assumes that the xo_board clock is named
"xo_board", not "xo-board".  Add a "clock-output-names" property to
the device tree to get the right name.

Also add the proper speed for the xo-clock as 38400000.  This is
internally divided in RPMh clock driver to get "bi_tcxo" at 19200000.

After this change the clock tree in /sys/kernel/debug/clk/clk_summary
looks much better.

NOTES:
- Technically you could argue that this clock could belong in board
  .dts files, not in the SoC one.  However at the moment it's believed
  that 100% of sdm845 boards will have an external clock at 38.4.  It
  can always be moved later if necessary.
- We could rename the "xo-board" device tree node to "xo_board" to
  achieve the same effect as this patch.  Presumably device-tree folks
  would rather keep node names using dashes though.
- We could change the RPMh clock driver to use a dash to achieve the
  same effect as this patch, but all other clocks in the clock tree
  use underscores.  It seems silly to change just this one.

Fixes: 7bafa643647f ("arm64: dts: sdm845: Add minimal dts/dtsi files for sdm845 SoC and MTP")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-22 23:29:00 -05:00
Sibi S
71c8428e48 arm64: dts: qcom: Add SDM845 SMEM nodes
Add all the necessary dt nodes to support SMEM driver
on SDM845. It also adds the required memory carveouts
so that the kernel does not access memory that is in
use.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-22 23:28:59 -05:00
Sibi S
03208ff7bf arm64: dts: qcom: Add APSS shared mailbox node to SDM845
This patch add the node to support APSS shared
mailbox on SDM845

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-22 23:28:59 -05:00
Srinivas Kandagatla
c16e78b8e8 arm64: dts: msm8916: fix gic_irq_domain_translate warnings
Remove the usage of IRQ_TYPE_NONE to fix loud warnings from
patch (83a86fbb5b "irqchip/gic: Loudly complain about
the use of IRQ_TYPE_NONE").

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Thierry Escande <thierry.escande@linaro.org>
Tested-by: Thierry Escande <thierry.escande@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-22 23:28:54 -05:00
Mahesh Sivasubramanian
290fa8d708 dt-bindings: introduce Command DB for QCOM SoCs
Command DB provides information on shared resources like clocks,
regulators etc., probed at boot by the remote subsytem and made
available in shared memory.

Cc: devicetree@vger.kernel.org
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-22 23:28:54 -05:00
Srinivas Kandagatla
575dc637a9 arm64: dts: apq8096-db820c: Add micro sd card supplies
This patch adds missing microSD card supplies, without this uSD
card will not be detected.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-22 23:28:53 -05:00
Karthikeyan Ramasubramanian
e9b0241556 dt-bindings: soc: qcom: Add device tree binding for GENI SE
Add device tree binding support for the QCOM GENI SE driver.

Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
Signed-off-by: Sagar Dharia <sdharia@codeaurora.org>
Signed-off-by: Girish Mahadevan <girishm@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-22 23:28:52 -05:00
Thierry Escande
07256d0075 dt-bindings: net: bluetooth: Add qualcomm-bluetooth
Add binding document for serial bluetooth chips using Qualcomm protocol.

Signed-off-by: Thierry Escande <thierry.escande@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-22 23:28:52 -05:00
Thierry Escande
3e4cb73080 arm64: dts: apq8096-db820c: enable bluetooth node
Add a new serial node for the Qualcomm BT controller QCA6174. This
allows automatic probing and hci registration through the serdev
framework instead of relying on the userspace helpers.

Signed-off-by: Thierry Escande <thierry.escande@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-22 23:28:51 -05:00
Srinivas Kandagatla
5360394706 arm64: dts: apq8096-db820c: Enable wlan and bt en pins
This patch enables regulators and gpios for the Qualcomm QCA6174 BT/WLAN
combo controller.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Thierry Escande <thierry.escande@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-22 23:28:51 -05:00
Arnd Bergmann
228b9cae76 arm64: dts: qcom: rename qcom,pcie devices to pcie
The node name for a PCIe host bridge must be "pcie" as required by
the binging. dtc now warns about it:

arch/arm64/boot/dts/qcom/apq8096-db820c.dtb: Warning (pci_bridge): /soc/agnoc@0/qcom,pcie@610000: node name is not "pci" or "pcie"
arch/arm64/boot/dts/qcom/apq8096-db820c.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/arm64/boot/dts/qcom/msm8996-mtp.dtb: Warning (pci_bridge): /soc/agnoc@0/qcom,pcie@610000: node name is not "pci" or "pcie"
arch/arm64/boot/dts/qcom/msm8996-mtp.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'

This renames the nodes as appropriate.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-22 23:28:50 -05:00
Jeremy McNicoll
0295d4dfa8 arm64: dts: msm8992: add pstore-ramoops support
With the addition of this ramoops node it enables post mortem
analysis if a debug cable is not attached and/or not available.

All addresses and values were extracted from CAF AOSP marshmallow
DR 1.6.

Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-22 23:28:49 -05:00
Rajendra Nayak
6d4cf750d0 arm64: dts: sdm845: Add minimal dts/dtsi files for sdm845 SoC and MTP
Add a skeletal sdm845 SoC dtsi and MTP board dts/dtsi files

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-22 23:28:49 -05:00
Jeremy McNicoll
f3b2c99e73 arm64: dts: Enable onboard SDHCI on msm8992
This enables SDHCI on the Nexus 5X as well creates common smd_rpm node
which can be shared between both 5X and 6P as per HW design.

Given the lack of documentation, only downstream code was used as a reference
and it eludes to the fact that 8994-rpm-regulator is common between both msm8992
& msm8994.   [ see msm.git branch: msm-angler-3.10-marshmallow-mr1, msm8992.dtsi]

At this early stage of development it makes sense for the 8994-rpm-regulator
to be common until data / documentation suggests otherwise.

Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-22 23:28:41 -05:00
David S. Miller
1fe8c06c4a Merge branch 'qed-firmware-TLV'
Sudarsana Reddy Kalluru says:

====================
qed*: Add support for management firmware TLV request.

Management firmware (MFW) requires config and state information from
the driver. It queries this via TLV (type-length-value) request wherein
mfw specificies the list of required TLVs. Driver fills the TLV data
and responds back to MFW.
This patch series adds qed/qede/qedf/qedi driver implementation for
supporting the TLV queries from MFW.

Changes from previous versions:
-------------------------------
v2: Split patch (2) into multiple simpler patches.
v2: Update qed_tlv_parsed_buf->p_val datatype to void pointer to avoid
    bunch of unnecessary typecasts.

Please consider applying this series to "net-next".
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22 23:29:55 -04:00
Manish Rangankar
269afb3603 qedi: Add get_generic_tlv_data handler.
Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22 23:29:54 -04:00
Manish Rangankar
534bbdf883 qedi: Add support for populating ethernet TLVs.
This patch adds callbacks for providing the ethernet protocol driver TLVs.

Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22 23:29:54 -04:00
Chad Dupuis
8673daf4f5 qedf: Add get_generic_tlv_data handler.
Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22 23:29:54 -04:00
Chad Dupuis
642a0b37e6 qedf: Add support for populating ethernet TLVs.
This patch adds callbacks for providing the ethernet protocol driver TLVs.

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22 23:29:54 -04:00