Commit graph

932,869 commits

Author SHA1 Message Date
Anju T Sudhakar
d2032678e5 powerpc/perf: Fix memory allocation for core-imc based on num_possible_cpus()
Currently memory is allocated for core-imc based on cpu_present_mask,
which has bit 'cpu' set iff cpu is populated. We use (cpu number / threads
per core) as the array index to access the memory.

Under some circumstances firmware marks a CPU as GUARDed CPU and boot the
system, until cleared of errors, these CPU's are unavailable for all
subsequent boots. GUARDed CPUs are possible but not present from linux
view, so it blows a hole when we assume the max length of our allocation
is driven by our max present cpus, where as one of the cpus might be online
and be beyond the max present cpus, due to the hole.
So (cpu number / threads per core) value bounds the array index and leads
to memory overflow.

Call trace observed during a guard test:

Faulting instruction address: 0xc000000000149f1c
cpu 0x69: Vector: 380 (Data Access Out of Range) at [c000003fea303420]
    pc:c000000000149f1c: prefetch_freepointer+0x14/0x30
    lr:c00000000014e0f8: __kmalloc+0x1a8/0x1ac
    sp:c000003fea3036a0
   msr:9000000000009033
   dar:c9c54b2c91dbf6b7
  current = 0xc000003fea2c0000
  paca    = 0xc00000000fddd880	 softe: 3	 irq_happened: 0x01
    pid   = 1, comm = swapper/104
Linux version 4.16.7-openpower1 (smc@smc-desktop) (gcc version 6.4.0
(Buildroot 2018.02.1-00006-ga8d1126)) #2 SMP Fri May 4 16:44:54 PDT 2018
enter ? for help
call trace:
	 __kmalloc+0x1a8/0x1ac
	 (unreliable)
	 init_imc_pmu+0x7f4/0xbf0
	 opal_imc_counters_probe+0x3fc/0x43c
	 platform_drv_probe+0x48/0x80
	 driver_probe_device+0x22c/0x308
	 __driver_attach+0xa0/0xd8
	 bus_for_each_dev+0x88/0xb4
	 driver_attach+0x2c/0x40
	 bus_add_driver+0x1e8/0x228
	 driver_register+0xd0/0x114
	 __platform_driver_register+0x50/0x64
	 opal_imc_driver_init+0x24/0x38
	 do_one_initcall+0x150/0x15c
	 kernel_init_freeable+0x250/0x254
	 kernel_init+0x1c/0x150
	 ret_from_kernel_thread+0x5c/0xc8

Allocating memory for core-imc based on cpu_possible_mask, which has
bit 'cpu' set iff cpu is populatable, will fix this issue.

Reported-by: Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Tested-by: Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com>
Fixes: 39a846db1d ("powerpc/perf: Add core IMC PMU support")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-18 21:57:49 +10:00
Colin Ian King
ba01b058a5 powerpc/rtas: Fix spelling mistake "Discharching" -> "Discharging"
Trivial fix to spelling mistake in battery_charging array.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-18 21:55:01 +10:00
Paul Mackerras
ec531d027a KVM: PPC: Book3S PR: Enable use on POWER9 inside HPT-mode guests
This relaxes the restriction on using PR KVM on POWER9.  The existing
code does work inside a guest partition running in HPT mode, because
hypercalls such as H_ENTER use the old HPTE format, not the new
format used by POWER9, and so no change to PR KVM's HPT manipulation
code is required.  PR KVM will still refuse to run if the kernel is
using radix translation or if it is running bare-metal.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-05-18 21:49:28 +10:00
YuheiOKAWA
771ff17e82 mtd: spi-nor: Add support for EN25QH32
Add support for Eon en25qh32 spi nor flash.

Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-18 13:38:53 +02:00
Dan Carpenter
ed1812c44c ALSA: dice: fix a bounds check in snd_dice_detect_tcelectronic_formats()
The "entry" pointer is always non-NULL so this test for out of bounds
won't work.

Fixes: f1f0f330b1 ("ALSA: dice: add parameters of stream formats for models produced by TC Electronic")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-18 13:38:34 +02:00
Kimmo Rautkoski
d616f81cdd mtd: spi-nor: Add support for is25wp series chips
Added support for is25wp032, is25wp064 and is25wp128.

Signed-off-by: Kimmo Rautkoski <ext-kimmo.rautkoski@vaisala.com>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-18 13:33:22 +02:00
Stephen Douthit
7fccf56ea4 mtd: spi-nor: Add Winbond w25q32jv support
Datasheet:
https://www.winbond.com/resource-files/w25q32jv%20dtr%20revf%2002242017.pdf

Minimal testing done with fw_printenv/fw_setenv, test board did not
support dual or quad access.

Signed-off-by: Stephen Douthit <stephend@silicom-usa.com>
Tested-by: Stephen Douthit <stephend@silicom-usa.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-18 13:25:50 +02:00
Yogesh Gaur
d728a7ea90 mtd: spi-nor: fsl-quadspi: add support for ls2080a/ls1080a
LS2080a/LS1088a supports Freescale Quad SPI controller.
Add fsl-quadspi driver support for ls2080a and ls1088a chip.

Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com>
Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-18 13:12:53 +02:00
Philipp Zabel
3278aa0ec3 mtd: spi-nor: stm32-quadspi: explicitly request exclusive reset control
Commit a53e35db70 ("reset: Ensure drivers are explicit when requesting
reset lines") started to transition the reset control request API calls
to explicitly state whether the driver needs exclusive or shared reset
control behavior. Convert all drivers requesting exclusive resets to the
explicit API call so the temporary transition helpers can be removed.

No functional changes.

Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-18 13:03:36 +02:00
Stefan Agner
c9b6be7dc1 drm/panel: simple: Fix data type in KEO TX31D200VM0BAA timings
All values in a struct struct timing_entry (every entry in
struct display_timing) require an integer. Choose the closest
safe integer of 32.

This avoids a warning seen with clang:
  drivers/gpu/drm/panel/panel-simple.c:1250:27: warning: implicit
       conversion from 'double' to 'u32' (aka 'unsigned int')
       changes value from 33.5 to 33 [-Wliteral-conversion]
         .vfront_porch = { 6, 21, 33.5 },
                         ~        ^~~~
  drivers/gpu/drm/panel/panel-simple.c:1251:26: warning: implicit
        conversion from 'double' to 'u32' (aka 'unsigned int')
        changes value from 33.5 to 33 [-Wliteral-conversion]
          .vback_porch = { 6, 21, 33.5 },
                         ~        ^~~~

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180419212003.8155-1-stefan@agner.ch
2018-05-18 12:53:35 +02:00
Lucas Stach
2554f154b4 drm/panel: simple: AUO P320HVN03 uses SPWG data ordering
The patch adding support for the AUO P320HVN03 panel was written against a
preliminary datasheet, which specified JEIDA data ordering. Testing with
real hardware has shown that the actually used data ordering is SPWG.

Fixes: 70c0d5b783 (drm/panel: simple: add support for AUO P320HVN03)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180411152741.22483-1-l.stach@pengutronix.de
2018-05-18 12:53:35 +02:00
Nicholas Mc Guire
aba3a882a1 mtd: spi-nor: intel: provide a range for poll_timout
The overall poll time here is INTEL_SPI_TIMEOUT * 1000 which is
5000 * 1000 - so 5seconds and it is coded as a tight loop here delay_us
to readl_poll_timeout() is set to 0. As this is never called in an atomic
context sleeping should be no issue and there is no reasons for the
tight-loop here.

Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-18 12:53:33 +02:00
Yogesh Gaur
dd50a1c4e5 mtd: spi-nor: fsl-quadspi: fix api naming typo _init_ahb_read
Fix api naming typo _init_ahb_read
fsl_qspi_init_abh_read --> fsl_qspi_init_ahb_read

Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-18 12:53:23 +02:00
Mika Westerberg
1f37033f05 mtd: spi-nor: intel-spi: Explicitly mark the driver as dangerous in Kconfig
The driver is not meant for normal users at all but instead such users
who really know what they are doing and are able to build their own
kernel to enable it. Mark both driver Kconfig entries as dangerous to
make sure the driver is not accidentally enabled without understanding
possible consequences in doing so.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-18 12:53:15 +02:00
Mika Westerberg
c7d6a82d90 mtd: spi-nor: intel-spi: Fix atomic sequence handling
On many older systems using SW sequencer the PREOP_OPTYPE register
contains two preopcodes as following:

  PREOP_OPTYPE=0xf2785006

The last two bytes are the opcodes decoded to:

  0x50 - Write enable for volatile status register
  0x06 - Write enable

The former is used to modify volatile bits in the status register. For
non-volatile bits the latter is needed. Preopcodes are used in SW
sequencer to send one command "atomically" without anything else
interfering the transfer. The sequence that gets executed is:

  - Send preopcode (write enable) from PREOP_OPTYPE register
  - Send the actual SPI command
  - Poll busy bit in the status register (0x05, RDSR)

Commit 8c473dd61b ("spi-nor: intel-spi: Don't assume OPMENU0/1 to be
programmed by BIOS") enabled atomic sequence handling but because both
preopcodes are programmed, the following happens:

  if (preop >> 8)
  	val |= SSFSTS_CTL_SPOP;

Since on these systems preop >> 8 == 0x50 we end up picking volatile
write enable instead. Because of this the actual write command is pretty
much NOP unless there is a WREN latched in the chip already.

Furthermore we should not really just assume that WREN was issued in
previous call to intel_spi_write_reg() because that might not be the
case.

This updates driver to first check that the opcode is actually available
in PREOP_OPTYPE register and if not return error back to the spi-nor
core (if the controller is not locked we program it now). In addition we
save the opcode to ispi->atomic_preopcode field which is checked in next
call to intel_spi_sw_cycle() to actually enable atomic sequence using
the requested preopcode.

Fixes: 8c473dd61b ("spi-nor: intel-spi: Don't assume OPMENU0/1 to be programmed by BIOS")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-18 12:53:05 +02:00
David Howells
564def7176 proc: Add a way to make network proc files writable
Provide two extra functions, proc_create_net_data_write() and
proc_create_net_single_write() that act like their non-write versions but
also set a write method in the proc_dir_entry struct.

An internal simple write function is provided that will copy its buffer and
hand it to the pde->write() method if available (or give an error if not).
The buffer may be modified by the write method.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-18 11:46:15 +01:00
David Howells
5d9de25d93 afs: Rearrange fs/afs/proc.c to remove remaining predeclarations.
Rearrange fs/afs/proc.c to get rid of all the remaining predeclarations.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-18 11:46:15 +01:00
David Howells
f06916895b afs: Rearrange fs/afs/proc.c to move the show routines up
Rearrange fs/afs/proc.c to move the show routines up to the top of each
block so the order is show, iteration, ops, file ops, fops.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-18 11:46:14 +01:00
David Howells
22ade7e7a8 afs: Rearrange fs/afs/proc.c by moving fops and open functions down
Rearrange fs/afs/proc.c by moving fops and open functions down so as to
remove predeclarations.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-18 11:46:14 +01:00
David Howells
10495a0071 afs: Move /proc management functions to the end of the file
In fs/afs/proc.c, move functions that create and remove /proc files to the
end of the source file as a first stage in getting rid of all the forward
declarations.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-18 11:46:14 +01:00
Johannes Berg
7ea3e110f2 cfg80211: release station info tidstats where needed
This fixes memory leaks in cases where we got the station
info but failed sending it out properly.

Fixes: 8689c051a2 ("cfg80211: dynamically allocate per-tid stats for station info")
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-18 12:37:55 +02:00
Dmitry Osipenko
5d797111af clk: tegra: Add quirk for getting CDEV1/2 clocks on Tegra20
CDEV1 and CDEV2 clocks are a bit special case, their parent clock is
created by the pinctrl driver. It should be possible for clk user to
request these clocks before pinctrl driver got probed and hence user will
get an orphaned clock. That might be undesirable because user may expect
parent clock to be enabled by the child, so let's return -EPROBE_DEFER
till parent clock appears.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-05-18 12:35:28 +02:00
Dmitry Osipenko
efc351b1f4 clk: tegra20: Correct parents of CDEV1/2 clocks
Parents of CDEV1/2 clocks are determined by muxing of the corresponding
pins. Pinctrl driver now provides the CDEV1/2 clock muxes and hence
CDEV1/2 clocks could have correct parents. Set CDEV1/2 parents to the
corresponding muxes to fix the parents.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Marc Dietrich <marvin24@gmx.de>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-05-18 12:35:07 +02:00
Dmitry Osipenko
08a52593fc clk: tegra20: Add DEV1/DEV2 OSC dividers
CDEV1/CDEV2 clocks could have corresponding oscillator clock divider as
a parent. Add these dividers in order to be able to provide that parent
option.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Marc Dietrich <marvin24@gmx.de>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-05-18 12:34:49 +02:00
Dmitry Osipenko
45a81df06e memory: tegra: Register SMMU after MC driver became ready
Memory Controller driver invokes SMMU driver registration and MC's
registers mapping is shared with SMMU. This mapping goes away if MC
driver probing fails after SMMU registration.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-05-18 12:31:55 +02:00
Marco Felsch
d460a2ea24
ASoC: ssm2305: fix header layout
Make C-header and SPDX-License-Identifier header uniform.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-18 11:20:11 +01:00
Jerome Brunet
22f65a389f clk: meson: use SPDX license identifiers consistently
Replace every license notices in drivers/clk/meson by SPDX license
identifiers, as described in license-rules.rst

Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-18 12:08:29 +02:00
Al Stone
8f8027c5f9 mailbox: PCC: erroneous error message when parsing ACPI PCCT
There have been multiple reports of the following error message:

[    0.068293] Error parsing PCC subspaces from PCCT

This error message is not correct.  In multiple cases examined, the PCCT
(Platform Communications Channel Table) concerned is actually properly
constructed; the problem is that acpi_pcc_probe() which reads the PCCT
is making the assumption that the only valid PCCT is one that contains
subtables of one of two types: ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE or
ACPI_PCCT_TYPE_HW_REDUCED_TYPE2.  The number of subtables of these
types are counted and as long as there is at least one of the desired
types, the acpi_pcc_probe() succeeds.  When no subtables of these types
are found, regardless of whether or not any other subtable types are
present, the error mentioned above is reported.

In the cases reported to me personally, the PCCT contains exactly one
subtable of type ACPI_PCCT_TYPE_GENERIC_SUBSPACE.  The function
acpi_pcc_probe() does not count it as a valid subtable, so believes
there to be no valid subtables, and hence outputs the error message.

An example of the PCCT being reported as erroneous yet perfectly fine
is the following:

                    Signature : "PCCT"
                 Table Length : 0000006E
                     Revision : 05
                     Checksum : A9
                       Oem ID : "XXXXXX"
                 Oem Table ID : "XXXXX   "
                 Oem Revision : 00002280
              Asl Compiler ID : "XXXX"
        Asl Compiler Revision : 00000002

        Flags (decoded below) : 00000001
                     Platform : 1
                     Reserved : 0000000000000000

                Subtable Type : 00 [Generic Communications Subspace]
                       Length : 3E

                     Reserved : 000000000000
                 Base Address : 00000000DCE43018
               Address Length : 0000000000001000

            Doorbell Register : [Generic Address Structure]
                     Space ID : 01 [SystemIO]
                    Bit Width : 08
                   Bit Offset : 00
         Encoded Access Width : 01 [Byte Access:8]
                      Address : 0000000000001842

                Preserve Mask : 00000000000000FD
                   Write Mask : 0000000000000002
              Command Latency : 00001388
          Maximum Access Rate : 00000000
      Minimum Turnaround Time : 0000

To fix this, we count up all of the possible subtable types for the
PCCT, and only report an error when there are none (which could mean
either no subtables, or no valid subtables), or there are too many.
We also change the logic so that if there is a valid subtable, we
do try to initialize it per the PCCT subtable contents.  This is a
change in functionality; previously, the probe would have returned
right after the error message and would not have tried to use any
other subtable definition.

Tested on my personal laptop which showed the error previously; the
error message no longer appears and the laptop appears to operate
normally.

Signed-off-by: Al Stone <ahs3@redhat.com>
Reviewed-by: Prashanth Prakash <pprakash@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-18 12:08:15 +02:00
spanda@codeaurora.org
da50bd4258 drm/panel: simple: Add Innolux TV123WAM panel driver support
Add support for Innolux TV123WAM, which is a 12.3" eDP display panel
with 2160x1440 resolution.

Changes in v1:
 - Add the compatibility string, display_mode and panel_desc
   structures in alphabetical order (Sean Paul).

Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526363564-13823-4-git-send-email-spanda@codeaurora.org
2018-05-18 12:05:50 +02:00
spanda@codeaurora.org
9c04400f7e dt-bindings: drm/panel: Document Innolux TV123WAM panel bindings
Innolux TV123WAM is a 12.3" eDP display panel with
2160x1440 resolution, which can be supported by simple
panel driver.

Changes in v1:
 - Make use of simple panel driver instead of creating
   a new driver for this panel (Sean Paul).
 - Combine dt-binding and driver changes into one patch
   as done by other existing panel support changes.

Changes in v2:
 - Separate driver change from dt-binding documentation (Rob Herring).
 - Add the properties from simple-panel binding that are applicable to
   this panel (Rob Herring).

Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526363564-13823-5-git-send-email-spanda@codeaurora.org
2018-05-18 12:05:20 +02:00
Kieran Bingham
908001d778 arm64: dts: renesas: salvator-common: Add ADV7482 support
The Salvator boards use an ADV7482 receiver for HDMI and CVBS inputs.

Provide ADV7482 node on the i2c4 bus, along with connectors for the
hdmi and cvbs inputs, and link to the csi20 and csi40 nodes as outputs.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-18 11:52:03 +02:00
Johannes Berg
0fdf1493b4 mac80211: allocate and fill tidstats only when needed
This fixes memory leaks in the case where we just have the
station info on the stack for internal usage without sending
it to cfg80211.

Fixes: 8689c051a2 ("cfg80211: dynamically allocate per-tid stats for station info")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-18 11:40:44 +02:00
Emil Goode
2f8a6da866 gpu: host1x: Fix compiler errors by converting to dma_addr_t
The compiler is complaining with the following errors:

drivers/gpu/host1x/cdma.c:94:48: error:
	passing argument 3 of ‘dma_alloc_wc’ from incompatible pointer type
	[-Werror=incompatible-pointer-types]

drivers/gpu/host1x/cdma.c:113:48: error:
	passing argument 3 of ‘dma_alloc_wc’ from incompatible pointer type
	[-Werror=incompatible-pointer-types]

The expected pointer type of the third argument to dma_alloc_wc() is
dma_addr_t but phys_addr_t is passed.

Change the phys member of struct push_buffer to be dma_addr_t so that we
pass the correct type to dma_alloc_wc().
Also check pb->mapped for non-NULL in the destroy function as that is the
right way of checking if dma_alloc_wc() was successful.

Signed-off-by: Emil Goode <emil.fsw@goode.io>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-05-18 11:23:48 +02:00
Thierry Reding
eea740a98d drm/bridge: cdns: Mark runtime PM operations as maybe unused
Building the driver in a configuration with !PM currently causes a
warning about these operations being unused. Mark them as such to shut
up the compiler.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180426135853.30895-1-thierry.reding@gmail.com
2018-05-18 11:22:06 +02:00
Philippe CORNU
12a6cbd4f3 drm/panel: otm8009a: Use new backlight API
The backlight API provides new functions to enable and disable the
backlight and which hide the intricacies of achieving the correct
result.

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423141054.13128-5-philippe.cornu@st.com
2018-05-18 11:22:06 +02:00
Philippe CORNU
6982b94312 drm/panel: otm8009a: No message if probe success
Remove the message in case of probe success. This comes from a
suggestion followed in the recent integration of the raydium rm68200
panel.

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423141054.13128-4-philippe.cornu@st.com
2018-05-18 11:22:06 +02:00
Philippe CORNU
36830ce4eb drm/panel: otm8009a: Fix glitches by moving backlight enable to otm8009a_enable()
The backlight 1st update was in the otm8009a_prepare() function for a
bad reason: backlight was not working in video mode and the
otm8009a_prepare() is in command mode for the init sequence. As the
backlight is now fixed (no low-power mode), it is good to put it back
in the otm8009a_enable() function, avoiding also image glitches visible
on some "slow" devices.

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423141054.13128-3-philippe.cornu@st.com
2018-05-18 11:22:06 +02:00
Philippe CORNU
d9f9565c1f drm/panel: otm8009a: Fix backlight updates
Backlight updates was not working anymore since the good implementation
of the DSI low-power mode in the DSI host driver. After a longer
analysis, the backlight updates in DSI video mode require the DSI high-
speed mode.

Note: it is important to keep the DSI low-power mode for the rest of the
driver as init sequence, sleep in/out... DSI commands work in low-power
mode.

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423141054.13128-2-philippe.cornu@st.com
2018-05-18 11:22:06 +02:00
Jyri Sarha
0c08754b59 drm/panel: Add device_link from panel device to DRM device
Add device_link from panel device (supplier) to DRM device (consumer)
when drm_panel_attach() is called. This patch should protect the master
DRM driver if an attached panel driver unbinds while it is in use. The
device_link should make sure the DRM device is unbound before the panel
driver becomes unavailable.

The device_link is removed when drm_panel_detach() is called. The
drm_panel_detach() should be called by the consumer DRM driver, not the
panel driver, otherwise both drivers are racing to delete the same link.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b53584fd988d045c13de22d81825395b0ae0aad7.1524727888.git.jsarha@ti.com
2018-05-18 11:22:06 +02:00
Jyri Sarha
38992c57c9 drm/panel: Remove drm_panel_detach() calls from all panel drivers
Remove all drm_panel_detach() calls from all panel drivers and update
the kerneldoc for drm_panel_detach().

Setting the connector and drm to NULL when the DRM panel device is going
away hardly serves any purpose. Usually the whole memory structure is
freed right after the remove call. However, calling the detach function
from the master DRM device, and setting the connector pointer to NULL,
has the logic of marking the panel again as available for another DRM
master to attach. The usual situation would be the same DRM master
device binding again.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/464b8d330d6b4c94cfb5aad2ca9ea7eb2c52d934.1524727888.git.jsarha@ti.com
2018-05-18 11:22:06 +02:00
Konrad Rzeszutek Wilk
240da953fc x86/bugs: Rename SSBD_NO to SSB_NO
The "336996 Speculative Execution Side Channel Mitigations" from
May defines this as SSB_NO, hence lets sync-up.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2018-05-18 11:17:30 +02:00
Dmitry Osipenko
15164e0072 ARM: tegra: Create platform device for tegra20-cpufreq driver
Tegra20-cpufreq driver require a platform device in order to be loaded,
instantiate a simple platform device for the driver during of the machines
late initialization.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-05-18 11:15:42 +02:00
Colin Ian King
57b70db28b
ASoC: wm2200,wm5100: fix spelling mistake: "Coefficeints" -> "Coefficients"
Trivial fix to spelling mistakes in SND_SOC_BYTES literal strings

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-18 10:14:39 +01:00
Alexander Wetzel
39c1134c66 mac80211: fix TX aggregation stop race
The mac80211 tear down code is not waiting for the driver call back.
This can bring down the the TX path (TID) till the user manually
reconnects. (Observed with iwldvm and enabled TX aggregation.)

The race can be prevented when the ampdu_mlme worker handles the tear
down.

The race:
 * ieee80211_sta_tear_down_BA_sessions calls
   ___ieee80211_stop_tx_ba_session for all TIDs,

 * then cancels the ampdu_mlme worker

 * and cleanups the TIDs the driver already has called back for.

 * ieee80211_stop_tx_ba_cb will never be called for a TID if the callback
   came after the the check in ieee80211_sta_tear_down_BA_sessions.

Signed-off-by: Alexander Wetzel <Alexander.Wetzel@web.de>
[johannes: "enabled" -> "blocked" and invert logic, simplify init]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-18 11:14:36 +02:00
Colin Ian King
4a22b00b28 cfg80211: fix spelling mistake: "uknown" -> "unknown"
Trivial fix to spelling mistake in pr_debug message text

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-18 11:14:36 +02:00
Johannes Berg
73887fd906 cfg80211/mac80211: revert to stack allocation for sinfo
Arend's previous patch made the sinfo structure smaller
again by to dynamically allocating the per-tid stats
only when needed. Thus, revert to stack allocation for
the struct to simplify the code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-18 11:14:35 +02:00
Arend van Spriel
8689c051a2 cfg80211: dynamically allocate per-tid stats for station info
With the addition of TXQ stats in the per-tid statistics the struct
station_info grew significantly. This resulted in stack size warnings
due to the structure itself being above the limit for the warnings.

Add an allocation function that those who want to provide per-tid
stats should use to allocate the tid array, i.e.
struct station_info::pertid.

Cc: Toke Høiland-Jørgensen <toke@toke.dk>
Fixes: 52539ca89f ("cfg80211: Expose TXQ stats and parameters to userspace")
Signed-off-by: Arend van Spriel <aspriel@gmail.com>
[johannes: fix missing BIT() and logic by removing]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-18 11:14:34 +02:00
Colin Ian King
ecd6331370
ASoC: wm8904: fix spelling mistake: "Caputure" -> "Capture"
Trivial fix to spelling mistake in SOC_ENUM literal string

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-18 10:11:10 +01:00
Chris Wilson
867985d4a4 drm/i915: Pull the context->pin_count dec into the common intel_context_unpin
As all backends implement the same pin_count mechanism and do a
dec-and-test as their first step, pull that into the common
intel_context_unpin(). This also pulls into the caller, eliminating the
indirect call in the usual steady state case. The intel_context_pin()
side is a little more complicated as it combines the lookup/alloc as
well as pinning the state, and so is left for a later date.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517212633.24934-4-chris@chris-wilson.co.uk
2018-05-18 09:35:28 +01:00
Chris Wilson
1fc44d9b1a drm/i915: Store a pointer to intel_context in i915_request
To ease the frequent and ugly pointer dance of
&request->gem_context->engine[request->engine->id] during request
submission, store that pointer as request->hw_context. One major
advantage that we will exploit later is that this decouples the logical
context state from the engine itself.

v2: Set mock_context->ops so we don't crash and burn in selftests.
    Cleanups from Tvrtko.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517212633.24934-3-chris@chris-wilson.co.uk
2018-05-18 09:35:22 +01:00