Commit graph

932,869 commits

Author SHA1 Message Date
Krzysztof Kozlowski
4f52e55081 drm/exynos/decon: Move headers from global to local place
The DECON headers contain only defines for registers.  There are no
other drivers using them so this should be put locally to the Exynos DRM
driver.  Keeping headers local helps managing the code.

Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-01-02 08:38:00 +09:00
Fabio Estevam
cb30701b74 drm/exynos: decon5433: Remove unnecessary platform_get_resource() error check
devm_ioremap_resource() already checks if the resource is NULL, so
remove the unnecessary platform_get_resource() error check.

Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-01-02 08:36:39 +09:00
Miquel Raynal
f80ee03fe7 thermal: armada: Give meaningful names to the thermal zones
After registration to the thermal core, sysfs will make one entry
per instance of the driver in /sys/class/thermal_zoneX and
/sys/class/hwmon/hwmonX, X being the index of the instance, all of them
having the type/name "armada_thermal".

Until now there was only one thermal zone per SoC but SoCs like Armada
A7K and Armada A8K have respectively two and three thermal zones (one
per AP and one per CP) and this number is subject to grow in the future.

Use dev_name() instead of the "armada_thermal" string to get a
meaningful name and be able to identify the thermal zones from
userspace.

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 13:27:21 -08:00
Miquel Raynal
64163681a2 thermal: armada: Wait sensors validity before exiting the init callback
The thermal core will check for sensors validity right after the
initialization callback has returned. As the initialization routine make
a reset, the sensors are not ready immediately and the core spawns an
error in the dmesg. Avoid this annoying situation by polling on the
validity bit before exiting from these routines. This also avoid the use
of blind sleeps.

Suggested-by: David Sniatkiwicz <davidsn@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 13:25:19 -08:00
Miquel Raynal
8c0b888f66 thermal: armada: Change sensors trim default value
Errata #132698 highlights an error in the default value of Tc trim.
Set this parameter to b'011.

Suggested-by: David Sniatkiwicz <davidsn@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 13:23:04 -08:00
Miquel Raynal
a9d58a1aa3 thermal: armada: Update Kconfig and module description
Update Armada thermal driver Kconfig entry as well as the driver's
MODULE_DESCRIPTION content, now that 64-bit SoCs are also supported,
eg. Armada 7K and Armada 8K.

Use the generic term "Marvell EBU Armada SoCs" instead of listing all
the supported SoCs everywhere (excepted in the Kconfig description,
where it is useful to have a list).

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 13:21:48 -08:00
Baruch Siach
ccf8f522d1 thermal: armada: Add support for Armada CP110
The CP110 component is integrated in the Armada 8k and 7k lines of
processors.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[<miquel.raynal@free-electrons.com>: renamed the register pointers as
well as some definitions related to the new register names and
simplified the init sequence for Armada 380]
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 13:20:40 -08:00
Baruch Siach
2ff1279992 thermal: armada: Add support for Armada AP806
The AP806 component is integrated in the Armada 8K and 7K lines of
processors.

The thermal sensor sample field on the status register is a signed
value. Extend armada_get_temp() and the driver structure to handle
signed values.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[<miquel.raynal@free-electrons.com>: Changes when applying over the
previous patches, including the register names changes, also switched
the coefficients values to s64 instead of unsigned long to deal with
negative values and used do_div instead of the traditionnal '/']
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 13:18:06 -08:00
Miquel Raynal
8371b8a332 thermal: armada: Use real status register name
Three 32-bit registers are used to drive the thermal IP: control0,
control1 and status. The two control registers share the same name both
in the documentation and in the code, while the latter is referred as
"sensor" in the code. Rename this pointer to be called "status" in order
to be aligned with the documentation.

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 13:17:18 -08:00
Miquel Raynal
2f28e4c24b thermal: armada: Clarify control registers accesses
Bindings were incomplete for a long time by only exposing one of the two
available control registers. To ease the migration to the full bindings
(already in use for the Armada 375 SoC), rename the pointers for
clarification. This way, it will only be needed to add another pointer
to access the other control register when the time comes.

This avoids dangerous situations where the offset 0 of the control
area can be either one register or the other depending on the bindings
used. After this change, device trees of other SoCs could be migrated to
the "full" bindings if they may benefit from features from the
unaccessible register, without any change in the driver.

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 13:16:29 -08:00
Miquel Raynal
27d92f27ae thermal: armada: Simplify the check of the validity bit
All Armada SoCs use one bit to declare if the sensor values are valid.
This bit moves across the versions of the IP.

The method until then was to do both a shift and compare with an useless
flag of "0x1". It is clearer and quicker to directly save the value that
must be ANDed instead of the bit position and do a single bitwise AND
operation.

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 13:15:41 -08:00
Baruch Siach
7f3be017a8 thermal: armada: Use msleep for long delays
Use msleep for long (> 10ms) delays, instead of the busy waiting mdelay.
All delays are called from the probe routine, where scheduling is
allowed.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 12:56:11 -08:00
Baruch Siach
7ba03c2599 dt-bindings: thermal: Describe Armada AP806 and CP110
Add compatible strings for AP806 and CP110 that are part of the Armada
8k/7k line of SoCs.

Add a note on the differences in the size of the control area in
different bindings. This is an existing difference between the Armada
375 binding and the other boards already supported. The new AP806 and
CP110 bindings are similar to the existing Armada 375 in this regard.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[<miquel.raynal@free-electrons.com>: reword, additional details]
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 12:28:20 -08:00
Biju Das
2d14a0ee5e dt-bindings: thermal: rcar: Add device tree support for r8a7743
Add thermal sensor support for r8a7743 SoC. The Renesas RZ/G1M
(r8a7743) thermal sensor module is identical to the R-Car Gen2 family.

No driver change is needed due to the fallback compatible value
"renesas,rcar-gen2-thermal".

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 12:12:01 -08:00
Matthias Brugger
f45ce7ee00 thermal: mtk: Cleanup unused defines
The mtk_thermal has some defiens which are never used within the driver.
This patch delets them.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 11:56:54 -08:00
Mauro Carvalho Chehab
85afe608f5 scripts: kernel_doc: better handle show warnings logic
The logic with inhibits warnings for definitions that is not
output is incomplete: it doesn't cover the cases where
OUTPUT_INTERNAL and OUTPUT_EXPORTED are used.

As the most common case is OUTPUT_ALL, place it first,
in order to optimize a litte bit the check logic.

Fixes: 2defb27292 ("scripts: kernel-doc: apply filtering rules to warnings")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-and-Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-01-01 12:49:07 -07:00
Uwe Kleine-König
4e5f61ca11 thermal: imx: update to new formula according to NXP AN5215
According to an application note from 03/2017 there is an updated formula to
calculate the temperature that better matches reality. This is implemented here.

While updating move the magic constants from cpp defines which are far above the
explaining formula to constants in the code just under the explaining comment.

Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 11:49:01 -08:00
Uwe Kleine-König
339d7492db thermal: imx: use consistent style to write temperatures
The previous commit already took care to use the right notation for
temperatures. Add correct units to all values representing temperatures in
the right notation for the rest of the file.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 11:46:45 -08:00
Uwe Kleine-König
c5bbdb4ba3 thermal: imx: improve comments describing algorithm for temp calculation
The description of the implemented algorithm is hardly understandable
without having the right application note side-by-side to the code.

Fix this by using shorter and more intuitive variable names, describe
their meaning and transform a single formula instead of first talking about
slope and then about "milli_Tmeas".

There are no code changes.

Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 11:45:55 -08:00
Adam Borowski
91581e4c60 fs/*/Kconfig: drop links to 404-compliant http://acl.bestbits.at
This link is replicated in most filesystems' config stanzas.  Referring
to an archived version of that site is pointless as it mostly deals with
patches; user documentation is available elsewhere.

Signed-off-by: Adam Borowski <kilobyte@angband.pl>
CC: Alexander Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: "Yan, Zheng" <zyan@redhat.com>
Acked-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Steve French <smfrench@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-01-01 12:45:37 -07:00
Masanari Iida
1892ce4cdd doc: md: Fix a file name to md-fault.c in fault-injection.txt
drivers/md/faulty.c has been renamed to md-faulty.c after
following commit merged int to the main line.

  935fe0983e .

But the file name in fault-injection.txt has not been changed.
Now the actual file name and document are in sync.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-01-01 12:43:09 -07:00
Uwe Kleine-König
e4bb2240d4 thermal: imx: Use better parameter names than "val"
The values passed to imx_init_calib() and imx_init_temp_grade() are
read from specific OCOTP values. Use their names (in lower case) as
parameter name instead of "val" to make the code easier to understand.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 11:41:59 -08:00
Matthew Wilcox
14ebc28e07 errseq: Add to documentation tree
- Move errseq.rst into core-api
 - Add errseq to the core-api index
 - Promote the header to a more prominent header type, otherwise we get three
   entries in the table of contents.
 - Reformat the table to look nicer and be a little more proportional in
   terms of horizontal width per bit (the SF bit is still disproportionately
   large, but there's no way to fix that).
 - Include errseq kernel-doc in the errseq.rst
 - Neaten some kernel-doc markup

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-01-01 12:40:27 -07:00
Nicolin Chen
d790405d1b thermal: tegra: remove forward declarations
This patch just simply moves tegra_thermctl_set_trip_temp() behind
those function implementations so that it can remove those forward
declarations.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 10:51:02 -08:00
Bartosz Golaszewski
98fb3a3473 eeprom: at24: fix a whitespace error in platform data
Replace spaces with tabs in the definition of AT24_FLAG_NO_RDROL.

Fixes: 9d404411091c ("eeprom: at24: support eeproms that do not auto-rollover reads")
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-01-01 19:40:50 +01:00
Bartosz Golaszewski
6ce261e87f eeprom: at24: add support for the write-protect pin
AT24 EEPROMs have a write-protect pin, which - when pulled high -
inhibits writes to the upper quadrant of memory (although it has been
observed that on some chips it disables writing to the entire memory
range).

On some boards, this pin is connected to a GPIO and pulled high by
default, which forces the user to manually change its state before
writing. On linux this means that we either need to hog the line all
the time, or set the GPIO value before writing from outside of the
at24 driver.

Make the driver check if the write-protect GPIO was defined in the
device tree and pull it low whenever writing to the EEPROM.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-01-01 19:40:50 +01:00
Bartosz Golaszewski
3f3d8ef7f4 dt-bindings: at24: new optional property - wp-gpios
AT24 EEPROMs have a write-protect pin, which - when pulled high -
inhibits writes to the upper quadrant of memory (although it has been
observed that on some chips it disables writing to the entire memory
range).

On some boards, this pin is connected to a GPIO and pulled high by
default, which forces the user to manually change its state before
writing. On linux this means that we either need to hog the line all
the time, or set the GPIO value before writing from outside of the
at24 driver.

Add a new optional property to the device tree binding document, which
allows to specify the GPIO line to which the write-protect pin is
connected.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
2018-01-01 19:40:50 +01:00
Sven Van Asbroeck
ef542e59d7 eeprom: at24: remove temporary fix for at24mac402 size
The chip size passed via devicetree, i2c, or acpi device ids is now no
longer limited to a power of two. So the temporary fix can be removed.

Signed-off-by: Sven Van Asbroeck <svendev@arcx.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-01-01 19:40:49 +01:00
Sven Van Asbroeck
b680f4fa74 eeprom: at24: convert magic numbers to structs
Fundamental properties such as capacity and page size differ among
at24-type chips. But these chips do not have an id register, so this
can't be discovered at runtime.

Traditionally, at24-type eeprom properties were determined in two ways:
- by passing a 'struct at24_platform_data' via platform_data, or
- by naming the chip type in the devicetree, which passes a 'magic
  number' to probe(), which is then converted to a 'struct
  at24_platform_data'.

Recently a bug was discovered because the magic number rounds down all
chip sizes to the lowest power of two. This was addressed by
a work-around commit 5478e478ee ("eeprom: at24: correctly set the
size for at24mac402"), with the wish that magic numbers should over
time be converted to structs.

This patch replaces the magic numbers with 'struct at24_chip_data'.

Signed-off-by: Sven Van Asbroeck <svendev@arcx.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-01-01 19:40:49 +01:00
Bartosz Golaszewski
eef6939849 eeprom: at24: code shrink
A regmap_config struct is pretty big and declaring two of them
statically just to tweak the reg_bits value adds unnecessary bloat.

Declare the regmap config locally in at24_probe() instead.

Bloat-o-meter output for ARM:

add/remove: 0/2 grow/shrink: 1/0 up/down: 4/-272 (-268)
Function                                     old     new   delta
at24_probe                                  1560    1564      +4
regmap_config_8                              136       -    -136
regmap_config_16                             136       -    -136
Total: Before=7012, After=6744, chg -3.82%

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-01-01 19:40:49 +01:00
Bartosz Golaszewski
ec3c2d518b eeprom: at24: use a common prefix for all symbols in at24.c
There are a couple symbols defined in the driver source file which are
missing the at24_ prefix. This patch fixes that.

For module params: use module_param_named() in order to not break
userspace.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-01-01 19:40:49 +01:00
Bartosz Golaszewski
aa4ce22897 eeprom: at24: fix coding style issues
Fix issues reported by checkpatch for at24.c.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-01-01 19:40:48 +01:00
Bartosz Golaszewski
f9a19fcce5 MAINTAINERS: add git URL for at24
Add the link to my git tree to the at24 section.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-01-01 19:40:48 +01:00
Sven Van Asbroeck
e32213fbc5 eeprom: at24: support eeproms that do not auto-rollover reads
Some multi-address eeproms in the at24 family may not automatically
roll-over reads to the next slave address. On those eeproms, reads
that straddle slave boundaries will not work correctly.

Solution:
Mark such eeproms with a flag that prevents reads straddling
slave boundaries. Add the AT24_FLAG_NO_RDROL flag to the eeprom
entry in the device_id table, or add 'no-read-rollover' to the
eeprom devicetree entry.

Note that I have not personally enountered an at24 chip that
does not support read rollovers. They may or may not exist.
However, my hardware requires this functionality because of
a quirk.

Signed-off-by: Sven Van Asbroeck <svendev@arcx.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-01-01 19:40:48 +01:00
Sven Van Asbroeck
355dd4ca10 dt-bindings: add eeprom "no-read-rollover" property
Adds an optional property for at24 eeproms. This parameterless
property indicates that the multi-address eeprom does not
automatically roll over reads to the next slave address.

Signed-off-by: Sven Van Asbroeck <svendev@arcx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-01-01 19:40:48 +01:00
Wolfram Sang
a01be217c5 MAINTAINERS: add DT binding docs for AT24
The driver gained DT support recently, so we should add the binding docs
in the MAINTAINERS file.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-01-01 19:40:48 +01:00
Wolfram Sang
fe06a3fa28 dt-bindings: eeprom: rename to at24.txt
This binding documentation is for the at24 driver, so the filename
should reflect it. This avoids confusion because we also have an
"eeprom" driver in Linux but it doesn't support DT even.

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-01-01 19:40:47 +01:00
Heiner Kallweit
a23727cb68 eeprom: at24: remove now unneeded smbus-related code
Remove remaining now unneeded code dealing with SMBUS details.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-01-01 19:40:47 +01:00
Heiner Kallweit
dd69a9da71 eeprom: at24: remove old read functions
Remove the old and now unused read functions.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-01-01 19:40:47 +01:00
Heiner Kallweit
4bb5c13cc2 eeprom: at24: add regmap-based read function
Add regmap-based read function and instead of using three different
read functions (standard, mac, serial) use just one and factor out the
read offset adjustment for mac and serial to at24_adjust_read_offset.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-01-01 19:40:46 +01:00
Heiner Kallweit
d4297d6795 eeprom: at24: remove old write functions
Remove the old and now unused write functions.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-01-01 19:40:46 +01:00
Heiner Kallweit
8e5888e17f eeprom: at24: add regmap-based write function
Add a regmap-based write function.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-01-01 19:40:46 +01:00
Heiner Kallweit
4604948641 eeprom: at24: change at24_translate_offset return type
Change return type of at24_translate_offset to *at24_client to make
member regmap accessible for subsequent patches of this series.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-01-01 19:40:46 +01:00
Heiner Kallweit
5c01525847 eeprom: at24: add basic regmap_i2c support
This patch adds basic regmap support to be used by subsequent
patches of this series.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-01-01 19:40:46 +01:00
Jeff Layton
7a11ac289c ntfs: remove i_version handling
NTFS keeps track of the i_version counter here, seemingly for no reason.
It does not set the SB_I_VERSION flag so it'll never be incremented on
write, and it doesn't increment it internally for metadata operations.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
2018-01-01 10:09:33 -05:00
Jeff Layton
8ec426c701 lustre: don't set f_version in ll_readdir
f_version is only ever used by filesystem-specific code. Generic
VFS code never uses it.

Nothing in lustre ever looks at it, so just remove this.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
2018-01-01 10:09:33 -05:00
Markus Elfring
c01fc2275e soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe()
* Add a jump target so that a specific error message is stored only once
  at the end of this function implementation.

* Replace two calls of the function "dev_err" by goto statements.

* Adjust two condition checks.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-01-01 00:29:09 -06:00
Damien Riegel
342a2922ac arm64: dts: qcom: msm8916-pins: keep cdc_dmic pins in suspend mode
This node was the only one that didn't have the same set of pins in
active and suspend mode.

Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-12-31 23:50:14 -06:00
Damien Riegel
3785630d04 arm64: dts: qcom: msm8916-pins: move sdhc2 cd node with its siblings
Nodes relative to the first sdhc node were interlaced with node of the
second sdhc. Move sdhc2_cd_pin with its siblings to prevent that. Also
rename the grouping node from sdhc2_cd_pin to pmx_sdc2_cd_pin, as
"pmx_sdc" is the prefix used by other nodes.

Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-12-31 23:50:14 -06:00
Damien Riegel
500566e0e9 arm64: dts: qcom: msm8916: normalize I2C and SPI nodes
The QUP core can be used either for I2C or SPI, so the same IP is mapped
by a driver or the other. SPI bindings use a leading 0 for the start
address and a size of 0x600, I2C bindings don't have the leading 0 and
have a size 0x1000.

To make them more similar, add the leading 0 to I2C bindings and changes
the size to 0x500 for all of them, as this is the actual size of these
blocks. Also align the second entry of the clocks array.

Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-12-31 23:50:13 -06:00