Commit graph

932,869 commits

Author SHA1 Message Date
Alexandre Belloni
0d57b8e3d5 ARM: dts: at91: sama5d3xek: use TCB0 as timers
Use tcb0 for timers as selected in sama5_defconfig.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:15 +01:00
Alexandre Belloni
a4799758f4 ARM: dts: at91: sama5d3: TC blocks are also simple-mfd and syscon devices
Add simple-mfd and syscon to the TC blocks to allow to register one of the
channels as clocksource properly at boot time and free up the remaining
channels for other use.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:14 +01:00
Alexandre Belloni
b3f41c6e81 ARM: dts: at91: kizboxmini: use TCB0 as timers
Use tcb0 for timers as selected in at91_dt_defconfig.

Cc: Antoine Aubert <a.aubert@overkiz.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:14 +01:00
Alexandre Belloni
67cb1e3141 ARM: dts: at91: cosino: use TCB0 as timers
Use tcb0 for timers as selected in at91_dt_defconfig.

Cc: Rodolfo Giometti <giometti@linux.it>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:13 +01:00
Alexandre Belloni
a4518537bf ARM: dts: at91: acme/g25: use TCB0 as timers
Use tcb0 for timers as selected in at91_dt_defconfig.

Cc: Sergio Tanzilli <tanzilli@acmesystems.it>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:13 +01:00
Alexandre Belloni
379f95ae16 ARM: dts: at91: at91sam9x5cm: use TCB0 as timers
Use tcb0 for timers as selected in at91_dt_defconfig.

[tested on at91sam9x25ek and at91sam9x35ek]
Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:13 +01:00
Alexandre Belloni
f25f2b11cb ARM: dts: at91: at91sam9x5: TC blocks are also simple-mfd and syscon devices
Add simple-mfd and syscon to the TC blocks to allow to register one of the
channels as clocksource properly at boot time and free up the remaining
channels for other use.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:12 +01:00
Alexandre Belloni
f31eaa1ec8 ARM: dts: at91: at91sam9n12ek: use TCB0 as timers
Use tcb0 for timers as selected in at91_dt_defconfig.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:12 +01:00
Alexandre Belloni
3ed4771255 ARM: dts: at91: at91sam9n12: TC blocks are also simple-mfd and syscon devices
Add simple-mfd and syscon to the TC blocks to allow to register one of the
channels as clocksource properly at boot time and free up the remaining
channels for other use.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:11 +01:00
Alexandre Belloni
559973fb5c ARM: dts: at91: at91sam9rlek: use TCB0 as timers
Use tcb0 for timers as selected in at91_dt_defconfig.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:11 +01:00
Alexandre Belloni
c33b1437c0 ARM: dts: at91: at91sam9rl: TC blocks are also simple-mfd and syscon devices
Add simple-mfd and syscon to the TC blocks to allow to register one of the
channels as clocksource properly at boot time and free up the remaining
channels for other use.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:10 +01:00
Alexandre Belloni
6689e2bf81 ARM: dts: at91: pm9g45: use TCB0 as timers
Use tcb0 for timers as selected in at91_dt_defconfig.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:10 +01:00
Alexandre Belloni
fb0f84fa95 ARM: dts: at91: at91sam9m10g45ek: use TCB0 as timers
Use tcb0 for timers as selected in at91_dt_defconfig.

Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:10 +01:00
Alexandre Belloni
b0492361e9 ARM: dts: at91: at91sam9g45: TC blocks are also simple-mfd and syscon devices
Add simple-mfd and syscon to the TC blocks to allow to register one of the
channels as clocksource properly at boot time and free up the remaining
channels for other use.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:09 +01:00
Alexandre Belloni
1a4e63d420 ARM: dts: at91: calao: use TCB0 as timers
Use tcb0 for timers as selected in at91_dt_defconfig.

[tested on usb_a9g20 and usb_a9263]
Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:08 +01:00
Alexandre Belloni
50567eea09 ARM: dts: at91: at91sam9263ek: use TCB0 as timers
Use tcb0 for timers as selected in at91_dt_defconfig.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:07 +01:00
Alexandre Belloni
d89b16f3f3 ARM: dts: at91: at91sam9263: TC blocks are also simple-mfd and syscon devices
Add simple-mfd and syscon to the TC blocks to allow to register one of the
channels as clocksource properly at boot time and free up the remaining
channels for other use.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:07 +01:00
Alexandre Belloni
51f0aeb2d2 ARM: dts: at91: at91sam9261ek: use TCB0 as timers
Use tcb0 for timers as selected in at91_dt_defconfig.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:06 +01:00
Alexandre Belloni
194ce525fb ARM: dts: at91: at91sam9261: TC blocks are also simple-mfd and syscon devices
Add simple-mfd and syscon to the TC blocks to allow to register one of the
channels as clocksource properly at boot time and free up the remaining
channels for other use.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:06 +01:00
Alexandre Belloni
ee0a0de69c ARM: dts: at91: ge863-pro3: use TCB0 as timers
Use tcb0 for timers as selected in at91_dt_defconfig.

Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:05 +01:00
Alexandre Belloni
32ce250b0a ARM: dts: at91: at91sam9g20ek: use TCB0 as timers
Use tcb0 for timers as selected in at91_dt_defconfig.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:05 +01:00
Alexandre Belloni
3692f91c06 ARM: dts: at91: kizbox: use TCB0 as timers
Use tcb0 for timers as selected in at91_dt_defconfig.

Cc: Antoine Aubert <a.aubert@overkiz.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:05 +01:00
Alexandre Belloni
3dabfdbf4a ARM: dts: at91: animeo_ip: use TCB0 as timers
Use tcb0 for timers as selected in at91_dt_defconfig.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:04 +01:00
Alexandre Belloni
c56eae6373 ARM: dts: at91: foxg20: use TCB0 as timers
Use tcb0 for timers as selected in at91_dt_defconfig.

Cc: Sergio Tanzilli <tanzilli@acmesystems.it>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:03 +01:00
Alexandre Belloni
c46ee845f8 ARM: dts: at91: ethernut5: use TCB0 as timers
Use tcb0 for timers as selected in at91_dt_defconfig.

Cc: Martin Reimann <martin.reimann@egnite.de>
Cc: Tim Schendekehl <tim.schendekehl@egnite.de>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:03 +01:00
Alexandre Belloni
e4c9b7a095 ARM: dts: at91: sam9_l9260: use TCB0 as timers
Use tcb0 for timers as selected in at91_dt_defconfig.

Cc: Raashid Muhammed <raashidmuhammed@zilogic.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:02 +01:00
Alexandre Belloni
09c982ffea ARM: dts: at91: at91sam9260ek: use TCB0 as timers
Use tcb0 for timers as selected in at91_dt_defconfig.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:02 +01:00
Alexandre Belloni
0178890e0b ARM: dts: at91: at91sam9260: TC blocks are also simple-mfd and syscon devices
Add simple-mfd and syscon to the TC blocks to allow to register one of the
channels as clocksource properly at boot time and free up the remaining
channels for other use.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:01 +01:00
Alexandre Belloni
98282fa5d6 ARM: dts: at91: mpa1600: use TCB0 as timers
Use tcb0 for timers as selected in at91_dt_defconfig.

Cc: Joachim Eastwood <manabian@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:01 +01:00
Alexandre Belloni
dbc9573e09 ARM: dts: at91: at91rm9200ek: use TCB0 for timers
Use tcb0 for timers like selected in at91_dt_defconfig.

Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:01 +01:00
Alexandre Belloni
d26e82974d ARM: dts: at91: at91rm9200: TC blocks are also simple-mfd and syscon devices
Add simple-mfd and syscon to the TC blocks to allow to register one of the
channels as clocksource properly at boot time and free up the remaining
channels for other use.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:00 +01:00
Alexandre Belloni
296cc300bd ARM: at91: Document new TCB bindings
The current binding for the TCB is not flexible enough for some use cases
and prevents proper utilization of all the channels.

Acked-by: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:50:00 +01:00
Mathieu Malaterre
ed4ced0c00 ARM: dts: at91: Remove leading 0x and 0s from bindings notation
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading "0x"

and

Warning (unit_address_format): Node /XXX unit name should not have leading 0s

Converted using the following command:

find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C

For simplicity, two sed expressions were used to solve each warnings separately.

To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:

https://elinux.org/Device_Tree_Linux#Linux_conventions

This will solve as a side effect warning:

Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"

This is a follow up to commit 4c9847b737 ("dt-bindings: Remove leading 0x from bindings notation")

Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:49:59 +01:00
Ludovic Desroches
42ed535595 ARM: dts: at91: introduce the sama5d2 ptc ek board
Add the official SAMA5D2 Peripheral Touch Controller Evaluation
Kit board.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31 15:49:52 +01:00
Thomas Gleixner
a62d69857a x86/ldt: Plug memory leak in error path
The error path in write_ldt() tries to free 'old_ldt' instead of the newly
allocated 'new_ldt', resulting in a memory leak. It also misses to clean up a
half populated LDT pagetable, which is not a leak as it gets cleaned up
when the process exits.

Free both the potentially half populated LDT pagetable and the newly
allocated LDT struct. This can be done unconditionally because once an LDT
is mapped subsequent maps will succeed, because the PTE page is already
populated and the two LDTs fit into that single page.

Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: f55f0501cb ("x86/pti: Put the LDT in its own PGD if PTI is on")
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1712311121340.1899@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-31 12:14:07 +01:00
Thomas Gleixner
decab0888e x86/mm: Remove preempt_disable/enable() from __native_flush_tlb()
The preempt_disable/enable() pair in __native_flush_tlb() was added in
commit:

  5cf0791da5 ("x86/mm: Disable preemption during CR3 read+write")

... to protect the UP variant of flush_tlb_mm_range().

That preempt_disable/enable() pair should have been added to the UP variant
of flush_tlb_mm_range() instead.

The UP variant was removed with commit:

  ce4a4e565f ("x86/mm: Remove the UP asm/tlbflush.h code, always use the (formerly) SMP code")

... but the preempt_disable/enable() pair stayed around.

The latest change to __native_flush_tlb() in commit:

  6fd166aae7 ("x86/mm: Use/Fix PCID to optimize user/kernel switches")

... added an access to a per CPU variable outside the preempt disabled
regions, which makes no sense at all. __native_flush_tlb() must always
be called with at least preemption disabled.

Remove the preempt_disable/enable() pair and add a WARN_ON_ONCE() to catch
bad callers independent of the smp_processor_id() debugging.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171230211829.679325424@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-31 12:12:51 +01:00
Thomas Gleixner
322f8b8b34 x86/smpboot: Remove stale TLB flush invocations
smpboot_setup_warm_reset_vector() and smpboot_restore_warm_reset_vector()
invoke local_flush_tlb() for no obvious reason.

Digging in history revealed that the original code in the 2.1 era added
those because the code manipulated a swapper_pg_dir pagetable entry. The
pagetable manipulation was removed long ago in the 2.3 timeframe, but the
TLB flush invocations stayed around forever.

Remove them along with the pointless pr_debug()s which come from the same 2.1
change.

Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171230211829.586548655@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-31 12:12:51 +01:00
Wolfram Sang
639136d2a7 Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into i2c/for-4.16
"A couple of patches this time. Just some more compatibles for the
pca954x driver and an error handling tweak for the reg driver."
2017-12-31 09:58:07 +01:00
Emily Deng
104bd2ca11 drm/amdgpu: Correct the IB size of bo update mapping.
The amdgpu_vm_frag_ptes will call amdgpu_vm_update_ptes, and for buffer
object that has shadow buffer, need twice commands.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-30 22:24:20 -05:00
Andy Shevchenko
017fc4f6f4 i2c: ismt: Use %pad specifier for dma_addr_t variables
...which takes care of proper format and size of the value.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-12-31 00:19:16 +01:00
Wolfram Sang
3e5f06bed7 i2c: algo-bit: init the bus to a known state
Ensure the bus is free when we register the adapter. Before the SCL/SDA
wires were in an unknown state. It used to work because sending a byte
has a retry mechanism which was triggered if the bus was initially in a
non-free state. But the graceful way to do it is to initialize
correctly.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-12-31 00:16:37 +01:00
Linus Walleij
e535376537 i2c/ARM: davinci: Deep refactoring of I2C recovery
Alter the DaVinci GPIO recovery fetch to use descriptors
all the way down into the board files.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Tested-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-12-31 00:09:39 +01:00
Linus Torvalds
71ee203389 SCSI fixes on 20171230
Two simple fixes, both of which cause I/O hangs.  The storvsc one is
 from the hyper-v which can hang under certain hot add/remove
 conditions and the other is generally, where removing a target and a
 device in close proximity can result in the release method being
 executed twice (and subsequent list and other corruption and an
 eventual panic).
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJaSBHsAAoJEAVr7HOZEZN4CGUP/jAF44WD9sV5E0Rzx4IrFJkr
 V0n5EBNeTOE6Qqy4M5LuXkLWVBRIAnctSa73r52sMamh2vkp9t5Fp1GafYRlM+3y
 7avZ9IUXnupbIjZeiI80aq+5OK1jEdMjI/up5lqF8XiifZ+Dqp6MHQW8hTHLUaqg
 y+bT16XzZ5ziRv9wJoxIscMCqGZHucN6Dsye98mwaS4bZuIi0hdDk+piY02GlI0C
 Nf77xZtNmQXVY5R8ydEe43ci1j5GwSbIg6MjbOmhCOhurnG4NX10QlQSM9zFPDHV
 XKVQcLFpJvdNVOwvwgkuMpeqDCzlSg9n2W8HjQDFUTsFeG03t6ylVtI6iYMXbgVm
 fiedJdOFk50dw0qkBypYu425fPkX5S/rg3zv+yDBO0vc1FZxMkXInnJsgL3CMzPH
 xXpGpICNCtcFmLpCbgyxjc4fcfWHwSsgqW0fD/NWcP//CcsUsOAgmM9HJw9jp+sM
 AqBonDGpm+E8EU1It2qxHl5uSfaGRL1aZ8kL0EbOpYM07XSIW/diZ0l0+Ma2MLq9
 lyKJsFmRt1I65aW36cT79SHEtArjtCBn9z184MO/9GyhLz5JxSk3CZ4KWo5eci8n
 PWZyArt7LyFojNZhjT3MEflidr/HlecB4M6XLbYtba1A8oYeNE3NwueCrPz3gjAC
 BCYPbM8Nx9IIarOy3pw7
 =Dqbu
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Two simple fixes, both of which cause I/O hangs.

  The storvsc one is from the hyper-v which can hang under certain hot
  add/remove conditions and the other is generally, where removing a
  target and a device in close proximity can result in the release
  method being executed twice (and subsequent list and other corruption
  and an eventual panic)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: storvsc: Fix scsi_cmd error assignments in storvsc_handle_error
  scsi: core: check for device state in __scsi_remove_target()
2017-12-30 14:31:30 -08:00
Tomasz Bachorski
ac5b85de17 i2c: mux: reg: don't log an error for probe deferral
It's possible that i2c_mux_reg_probe_dt() could return -EPROBE_DEFER.
In that case, driver will request a probe deferral and an error
suggesting device tree parsing problem will be reported. This is
a pretty confusing information. Let's change the error handling,
so driver will be able to request probe deferral without logging
not related errors.

Signed-off-by: Tomasz Bachorski <tomasz.bachorski@nokia.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-12-30 23:12:34 +01:00
Adrian Fiergolski
8f6d601689 i2c: mux: pca954x: add support for NXP PCA984x family
This patch extends the current i2c-mux-pca954x driver and adds support for
a newer PCA984x family of the I2C switches and multiplexers from NXP.

Signed-off-by: Adrian Fiergolski <adrian.fiergolski@cern.ch>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-12-30 23:12:34 +01:00
Simon Ser
ce90aaf5cd objtool: Fix seg fault with clang-compiled objects
Fix a seg fault which happens when an input file provided to 'objtool
orc generate' doesn't have a '.shstrtab' section (for instance, object
files produced by clang don't have this section).

Signed-off-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/c0f2231683e9bed40fac1f13ce2c33b8389854bc.1514666459.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-30 22:04:17 +01:00
Simon Ser
d89e426499 objtool: Fix seg fault caused by missing parameter
Fix a seg fault when no parameter is provided to 'objtool orc'.

Signed-off-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/9172803ec7ebb72535bcd0b7f966ae96d515968e.1514666459.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-30 22:04:17 +01:00
Linus Torvalds
efdd17f895 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:

 - two cosmetic fixes from Daniel Axtens and Hans de Goede

 - fix for I2C command mismatch fix for cp2112 driver from Eudean Sun

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: core: lower log level for unknown main item tags to warnings
  HID: holtekff: move MODULE_* parameters out of #ifdef block
  HID: cp2112: Fix I2C_BLOCK_DATA transactions
2017-12-30 10:16:51 -08:00
Linus Torvalds
3ce120b16c kbuild: add '-fno-stack-check' to kernel build options
It appears that hardened gentoo enables "-fstack-check" by default for
gcc.

That doesn't work _at_all_ for the kernel, because the kernel stack
doesn't act like a user stack at all: it's much smaller, and it doesn't
auto-expand on use.  So the extra "probe one page below the stack" code
generated by -fstack-check just breaks the kernel in horrible ways,
causing infinite double faults etc.

[ I have to say, that the particular code gcc generates looks very
  stupid even for user space where it works, but that's a separate
  issue.  ]

Reported-and-tested-by: Alexander Tsoy <alexander@tsoy.me>
Reported-and-tested-by: Toralf Förster <toralf.foerster@gmx.de>
Cc: stable@kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-12-30 09:38:03 -08:00
Eric Biggers
4e765b4972 af_key: fix buffer overread in parse_exthdrs()
If a message sent to a PF_KEY socket ended with an incomplete extension
header (fewer than 4 bytes remaining), then parse_exthdrs() read past
the end of the message, into uninitialized memory.  Fix it by returning
-EINVAL in this case.

Reproducer:

	#include <linux/pfkeyv2.h>
	#include <sys/socket.h>
	#include <unistd.h>

	int main()
	{
		int sock = socket(PF_KEY, SOCK_RAW, PF_KEY_V2);
		char buf[17] = { 0 };
		struct sadb_msg *msg = (void *)buf;

		msg->sadb_msg_version = PF_KEY_V2;
		msg->sadb_msg_type = SADB_DELETE;
		msg->sadb_msg_len = 2;

		write(sock, buf, 17);
	}

Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-12-30 09:52:08 +01:00