Commit graph

932,869 commits

Author SHA1 Message Date
Kishon Vijay Abraham I
423aa8ba05 ARM: omap2plus_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes)
Enable CONFIG_PCI_DRA7XX in order to be able to configure PCIe
controller present in dra7 SoCs in both host mode and device mode.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21 07:12:41 -08:00
Masahiro Yamada
ea04d6b456 ARM: make ARCH_S3C24XX select USE_OF and clean-up boot/dts/Makefile
ARCH_S3C24XX is a very exceptional platform that some DT files in
arch/arm/boot/dts/, but does not select USE_OF.

All the other platforms with DT files correctly select USE_OF
directly or indirectly (Most of them are either ARCH_MULTIPLATFORM
or ARM_SINGLE_ARMV7M).

With ARCH_S3C24XX fixed, "ifeq ($(CONFIG_OF),y)" in DT Makefile
can be deleted.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-12-21 16:11:12 +01:00
Javier Martinez Canillas
976a9b35d7 ARM: dts: exynos: Enable Mixer node for Exynos5800 Peach Pi machine
Commit 1cb686c08d ("ARM: dts: exynos: Add status property to Exynos 542x
Mixer nodes") disabled the Mixer node by default in the DTSI and enabled
for each Exynos 542x DTS. But unfortunately it missed to enable it for the
Exynos5800 Peach Pi machine, since the 5800 is also an 542x SoC variant.

Fixes: 1cb686c08d ("ARM: dts: exynos: Add status property to Exynos 542x Mixer nodes")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-12-21 16:09:44 +01:00
Javier Martinez Canillas
c3aed3f6a0 ARM: dts: socfpga: Add generic compatible string for I2C EEPROM
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.

But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.

So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-12-21 16:08:33 +01:00
Javier Martinez Canillas
22c75545c4 ARM: dts: lpc18xx: Add generic compatible string for I2C EEPROM
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.

But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.

So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-12-21 16:07:29 +01:00
Javier Martinez Canillas
d360ebaff4 ARM: dts: efm32: Add generic compatible string for I2C EEPROM
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.

But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.

So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-12-21 16:06:29 +01:00
Lokesh Vutla
234c91d4a3 ARM: OMAP2+: dra762: Register package specific hwmod
Register dra762 abz package specific hwmod. Also move registering rtc hwmod
into respective SoC conditional statements instead of doing it separately.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21 07:05:15 -08:00
Lokesh Vutla
987d13f6d7 ARM: OMAP2+: dra762: Add support for device package identification
dra762 comes in two packages:
- ABZ: Pin compatible package with DRA742 and DDR@1333MHz
- ACD: High performance(OPP_PLUS) package with new IPs

Both the above packages uses the same IDCODE hence needs to
differentiate using package information in DIE_ID_2.
Add support for the same.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21 07:04:10 -08:00
Arnd Bergmann
a8e9f5f672 Enable async communication with tee supplicant
This pull request enables asynchronous communication with TEE supplicant
 by introducing meta parameters in the user space API. The meta
 parameters can be used to tag requests with an id that can be matched
 against an asynchronous response as is done here in the OP-TEE driver.
 
 Asynchronous supplicant communication is needed by OP-TEE to implement
 GlobalPlatforms TEE Sockets API Specification v1.0.1. The specification
 is available at https://www.globalplatform.org/specificationsdevice.asp.
 
 This change is backwards compatible allowing older supplicants to work
 with newer kernels and vice versa.
 -----BEGIN PGP SIGNATURE-----
 
 iQI3BAABCgAhBQJaHoIkGhxqZW5zLndpa2xhbmRlckBsaW5hcm8ub3JnAAoJELWw
 uEGXj+zTdtoP/2/Og5YP0Xad0oRINgWJO/YnXT+kTHTHf35RuFA7LFbHdMNl4ZYx
 h7vTiHdgA1Bper+2ljLZdu2R36/za6LLVnof4p9WPDLueSJgH71jDMC3jVO0r1C7
 SydYuCUtcdNTNObSSy3SJVdMZtCyXA+p3Z1VLdP9E3fSVYg/36JH9clqkB/LrTC+
 NTC1w/g3cBcNIGj6kToPDwyXtKOk/9fMK7e4ylinscX0LyDmWTZyYRGrzB2gaek0
 Xk1fSEprX5jor99GdU1WtYuO/6hk1T1LglD/L0ROO++7RQYZiAyO6Lgfyi6mvlMi
 3oxuZRI3JZRR5hdzBzwxTpQGVVxj8ukYD/PFX0pBbw1XA9W9+gK7Du5OLmp4WZ+b
 t2Eg18pWivcRCmglpoS+VsirQkXT36ElCpHAK0QZ4gB2gVPFvNBjlFPD4xa5FsLw
 urO35ZLlj7b9VuEQQSJjif5FDc3sCyBlRuFQ1XCMXOeBULel8gnuWwyJRwwYhxIJ
 /moFkylFqOwewZui1oC1gmXCo/ud4xIw79+8HPN7ISves/bfJtDaMRK+YAFbPshl
 MbYCqRsr+B5o0MrFZbx+ofUNeJeh3Wwk/zdYoxTfRDGJ9ILBixBKCtPEmjX2MJGi
 Y66jiw73Yo0RsVTS3IO6sxFxsBi1mfGlpkUg4/pclr8Ijw71lc5msHkv
 =jsDo
 -----END PGP SIGNATURE-----

Merge tag 'tee-drv-async-supplicant-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers

Pull "Enable async communication with tee supplicant" from Jens Wiklander:

This pull request enables asynchronous communication with TEE supplicant
by introducing meta parameters in the user space API. The meta
parameters can be used to tag requests with an id that can be matched
against an asynchronous response as is done here in the OP-TEE driver.

Asynchronous supplicant communication is needed by OP-TEE to implement
GlobalPlatforms TEE Sockets API Specification v1.0.1. The specification
is available at https://www.globalplatform.org/specificationsdevice.asp.

This change is backwards compatible allowing older supplicants to work
with newer kernels and vice versa.

* tag 'tee-drv-async-supplicant-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee:
  optee: support asynchronous supplicant requests
  tee: add TEE_IOCTL_PARAM_ATTR_META
  tee: add tee_param_is_memref() for driver use
2017-12-21 16:02:07 +01:00
H. Nikolaus Schaller
3ed2c47e2a ARM: dts: gta04: improve panel compatibility string
Official vendor string is now "tpo" and not "toppoly".

Requires patch "omapdrm: panel: fix compatible vendor string for td028ttec1"
so that the driver understands both.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21 06:50:19 -08:00
Sebastian Reichel
252130d8d6 ARM: dts: n950: add display support
Add basic panel support for the Nokia N950. It must be tweaked a
little bit later, since the panel was built into the device
upside-down. Also the first 5 and the last 5 pixels are covered
by plastic.

Signed-off-By: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21 06:46:54 -08:00
Sebastian Reichel
d6c95d54b8 ARM: dts: omap4-droid4: improve LCD description
This improves LCD support for the Droid 4.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21 06:46:08 -08:00
Thierry Reding
ebae8d0743 drm/tegra: dc: Implement legacy blending
This implements alpha blending on legacy display controllers (Tegra20,
Tegra30 and Tegra114). While it's theoretically possible to support the
zpos property to enable userspace to specify the Z-order of each plane
individually, this is not currently supported and the same fixed Z-
order as previously defined is used.

Reverts commit 71835caa00 ("drm/tegra: fb: Force alpha formats") since
the opaque formats are now supported.

Reported-by: Dmitry Osipenko <digetx@gmail.com>
Fixes: 7772fdaef9 ("drm/tegra: Support ARGB and ABGR formats")
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-21 14:55:55 +01:00
Dmitry Osipenko
4c69ac12e3 drm/tegra: Correct timeout in tegra_syncpt_wait
host1x_syncpt_wait() takes timeout value in jiffies, but DRM passes it in
milliseconds.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-21 14:52:39 +01:00
Dmitry Osipenko
04184b1fc9 drm/tegra: gem: Correct iommu_map_sg() error checking
iommu_map_sg() doesn't return a error value, but a size of the requested
IOMMU mapping or zero in case of error.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-21 14:52:39 +01:00
Dmitry Osipenko
f68ba6912b drm/tegra: dc: Link DC1 to DC0 on Tegra20
Hardware reset isn't actually broken on Tegra20, but there is a
dependency on the first display controller to be taken out of reset for
the second to be enabled successfully. Model this dependency using a PM
device link.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[treding@nvidia.com: minor cleanups, extend commit message]
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-21 14:52:38 +01:00
Arnd Bergmann
39f55c61da drm/tegra: Fix non-debugfs builds
The new debugfs registration fails to build when CONFIG_DEBUGFS is
disabled, because the drm_crtc structure is lacking a member in that
configuration:

drivers/gpu/drm/tegra/dc.c: In function 'tegra_dc_late_register':
drivers/gpu/drm/tegra/dc.c:1204:28: error: 'struct drm_crtc' has no member named 'debugfs_entry'

Without CONFIG_DEBUGFS, the rest of the function already degrades
into nothing, so we just avoid the one assignment.

Fixes: b95800eeef ("drm/tegra: dc: Register debugfs in ->late_register()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-21 14:52:38 +01:00
Thierry Reding
72ba4cf524 drm/tegra: dpaux: Keep reset defaults for hybrid pad parameters
Keep the reset values for the common mode voltage, output driver
impedance control and output driver current control parameters. This
fixes errors seen during SCDC communication with HDMI sinks.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-21 14:52:37 +01:00
Arnd Bergmann
013e2b722a drm/tegra: Mark Tegra186 display hub PM functions __maybe_unused
The newly introduced driver has optional suspend/resume functions,
causing a warning when CONFIG_PM is disabled:

drivers/gpu/drm/tegra/hub.c:749:12: error: 'tegra_display_hub_resume' defined but not used [-Werror=unused-function]
drivers/gpu/drm/tegra/hub.c:733:12: error: 'tegra_display_hub_suspend' defined but not used [-Werror=unused-function]

This marks them __maybe_unused to shut up the warnings.

Fixes: c4755fb906 ("drm/tegra: Add Tegra186 display hub support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-21 14:52:37 +01:00
Thierry Reding
bc8828bd08 drm/tegra: Use IOMMU groups
In order to support IOMMUs more generically and transparently handle the
ARM SMMU on Tegra186, move to using groups instead of devices for domain
attachment. An IOMMU group is a set of devices that share the same IOMMU
domain and is therefore a good match to represent what Tegra DRM needs.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-21 14:52:36 +01:00
Thierry Reding
41c3068cc2 gpu: host1x: Use IOMMU groups
Use IOMMU groups to attach the host1x device to its IOMMU domain. This
is not strictly necessary because the domain isn't shared with any other
device, but it makes the code consistent with how IOMMU is handled in
other drivers and provides an easy way to detect when no IOMMU has been
attached via device tree.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-21 14:52:36 +01:00
Thierry Reding
ab7d3f5826 drm/tegra: Implement zpos property
Implement the standard zpos property for planes on Tegra124 and later.
Earlier generations have a different blending unit that needs different
programming.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-21 14:52:35 +01:00
Thierry Reding
363541e8ee drm/tegra: dc: Remove redundant spinlock
The spinlock is only used to serialize accesses to the DC_CMD_INT_MASK
register. However, this register is accesses either with interrupts
masked (in tegra_crtc_atomic_enable()) or protected by the vbl_lock and
vblank_time_lock spinlocks of the DRM device. Therefore, these accesses
don't need any extra serialization and the lock can be removed.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-21 14:52:35 +01:00
Thierry Reding
1087fac18b drm/tegra: dc: Use direct offset to plane registers
Traditionally, windows were accessed indirectly, through a register
selection window that required a global register to be programmed with
the index of the window to access. Since the global register could be
written from modesetting functions as well as the interrupt handler
concurrently, accesses had to be serialized using a lock. Using direct
accesses to the window registers the lock can be avoided.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-21 14:52:34 +01:00
Thierry Reding
511c7023cf drm/tegra: dc: Support more formats
Also, split up formats into per-SoC lists because not all generations
support all of them. Note that the list is now exhaustive for all RGB
formats, but not for YUV and indexed formats.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-21 14:52:29 +01:00
Hans de Goede
1b46f17d68 platform/x86: Add driver for GPD pocket custom fan controller
Add a driver for the GPD pocket device's custom fan controller, which
gets controlled through 2 GPIOs listed in a FAN02501 ACPI device.

Cc: James <kernel@madingley.org>
Suggested-by: James <kernel@madingley.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-12-21 14:56:28 +02:00
Benjamin Berg
26befef00e platform/x86: thinkpad_acpi: Accept flat mode for type 4 multi mode status
On the X1 Yoga 2nd Generation and most likely other notebooks the FLAT
mode is reported. Decode it correctly rather than warning about an
unexpected multi mode status to be reported.

Signed-off-by: Benjamin Berg <bberg@redhat.com>
Cc: Peter FP1 Zhang <zhangfp1@lenovo.com
Cc: Lyude <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-12-21 14:56:27 +02:00
Geert Uytterhoeven
064cbc4f6a platform/x86: samsung-laptop: Grammar s/are can/can/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-12-21 14:56:27 +02:00
Shih-Yuan Lee (FourDollars)
842b854459 platform/x86: dell-wmi: Add an event created by Dell Latitude 5495
The Dell Latitude 5495 has the mic mute key.

Signed-off-by: Shih-Yuan Lee (FourDollars) <sylee@canonical.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-12-21 14:56:27 +02:00
Andy Shevchenko
1ea74a560c platform/x86: pmc_atom: introduce DEFINE_SHOW_ATTRIBUTE() macro
This macro deduplicates a lot of similar code in the pmc_atom.c module.
Targeting to be moved to seq_file.h eventually.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-12-21 14:56:26 +02:00
Hans de Goede
f1905b980f platform/x86: silead_dmi: Add entry for the Chuwi Vi8 tablet
Add touchscreen platform data for the Chuwi Vi8 tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-12-21 14:56:26 +02:00
Maruyama Shohei
d2d541e839 platform/x86: silead_dmi: add entry for Chuwi Hi8 tablet
This commit add entry for Chuwi Hi8 tablet.

Signed-off-by: Shohei Maruyama <cheat.sc.linux@outlook.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-12-21 14:56:26 +02:00
Nerijus Baliunas
170e9a53be platform/x86: silead_dmi: Add support for the Onda oBook 20 Plus tablet
Add touchscreen platform data for the Onda oBook 20 Plus tablet.

Firmware for this is available here:
https://github.com/onitake/gsl-firmware/blob/master/firmware/linux/silead/gsl3676-onda-obook-20-plus.fw

Signed-off-by: Nerijus Baliūnas <nerijus@users.sourceforge.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
[andy: massaged title and wrote commit message]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-12-21 14:56:26 +02:00
Wolfram Sang
d63da8c64b mmc: tmio: use io* accessors consistently
Because we started using io*_rep accessors previously because they are
more widely defined across architectures, let's be consistent and use
this family for all accessor wrappers.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-21 13:54:27 +01:00
Joel Stanley
1696784eb7 tools/gpio: Fix build error with musl libc
The GPIO tools build fails when using a buildroot toolchain that uses musl
as it's C library:

arm-broomstick-linux-musleabi-gcc -Wp,-MD,./.gpio-event-mon.o.d \
 -Wp,-MT,gpio-event-mon.o -O2 -Wall -g -D_GNU_SOURCE \
 -Iinclude -D"BUILD_STR(s)=#s" -c -o gpio-event-mon.o gpio-event-mon.c
gpio-event-mon.c:30:6: error: unknown type name ‘u_int32_t’; did you mean ‘uint32_t’?
      u_int32_t handleflags,
      ^~~~~~~~~
      uint32_t

The glibc headers installed on my laptop include sys/types.h in
unistd.h, but it appears that musl does not.

Fixes: 97f69747d8 ("tools/gpio: add the gpio-event-mon tool")
Cc: stable@vger.kernel.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-21 13:51:01 +01:00
Bartosz Golaszewski
a5ba91c380
regmap: debugfs: emit a debug message when locking is disabled
We currently silently omit creating the debugfs entries when regmap
locking is disabled. Users may not be aware of the reason for which
regmap files don't show up in debugfs. Add a dev_dbg() message
explaining that.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-21 12:27:25 +00:00
Rasmus Villemoes
221886646f
spi: pxa2xx: avoid redundant gpio_to_desc(desc_to_gpio()) round-trip
gpio_free(gpio) simply does gpiod_free(gpio_to_desc(gpio)), so it's
simpler and cleaner to use gpiod_free directly.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-21 12:19:02 +00:00
Timur Tabi
93ebe8636b pinctrl: qcom: disable GPIO groups with no pins
pinctrl-msm only accepts an array of GPIOs from 0 to n-1, and it expects
each group to support have only one pin (npins == 1).

We can support "sparse" GPIO maps if we allow for some groups to have zero
pins (npins == 0).  These pins are "hidden" from the rest of the driver
and gpiolib.

Access to unavailable GPIOs is blocked via a request callback.  If the
requested GPIO is unavailable, -EACCES is returned, which prevents
further access to that GPIO.

Signed-off-by: Timur Tabi <timur@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-21 13:04:35 +01:00
Timur Tabi
1ca2a92b2a Revert "gpio: set up initial state from .get_direction()"
This reverts commit 72d3200061.

We cannot blindly query the direction of all GPIOs when the pins are
first registered.  The get_direction callback normally triggers a
read/write to hardware, but we shouldn't be touching the hardware for
an individual GPIO until after it's been properly claimed.

Signed-off-by: Timur Tabi <timur@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-21 13:03:41 +01:00
Stefan Raspl
aa12f594f9 tools/kvm_stat: sort '-f help' output
Sort the fields returned by specifying '-f help' on the command line.
While at it, simplify the code a bit, indent the output and eliminate an
extra blank line at the beginning.

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-21 13:03:32 +01:00
Paolo Bonzini
fae1a3e775 kvm: x86: fix RSM when PCID is non-zero
rsm_load_state_64() and rsm_enter_protected_mode() load CR3, then
CR4 & ~PCIDE, then CR0, then CR4.

However, setting CR4.PCIDE fails if CR3[11:0] != 0.  It's probably easier
in the long run to replace rsm_enter_protected_mode() with an emulator
callback that sets all the special registers (like KVM_SET_SREGS would
do).  For now, set the PCID field of CR3 only after CR4.PCIDE is 1.

Reported-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Fixes: 660a5d517a
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-21 12:59:54 +01:00
Biju Das
6f41d5e087 ARM: dts: iwg22d-sodimm: Sound DMA support via DVC on DTS
DMA transfer uses DVC

     DMA               DMApp
[MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI]

     DMA               DMApp
[MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI]

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-21 12:24:49 +01:00
Biju Das
5ce5faa6fc ARM: dts: iwg22d-sodimm: Sound DMA support via SRC on DTS
DMA transfer to/from SRC

     DMA      DMApp
[MEM] -> [SRC] -> [SSIU] -> [SSI]

     DMA      DMApp
[MEM] <- [SRC] <- [SSIU] <- [SSI]

Current sound driver is supporting SSI/SRC random connection.
So, this patch is trying
SSI3 -> SRC3
SSI4 <- SRC4

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-21 12:24:32 +01:00
Biju Das
996d68a1f4 ARM: dts: iwg22d-sodimm: Sound DMA support via BUSIF on DTS
DMA transfer to/from SSIU

     DMA
[MEM] -> [SSIU] -> [SSI]

     DMA
[MEM] <- [SSIU] <- [SSI]

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-21 12:24:20 +01:00
Biju Das
b3f36c455c ARM: dts: iwg22d-sodimm: Sound DMA support on DTS
DMA transfer to/from SSI

     DMA
[MEM] -> [SSI]

     DMA
[MEM] <- [SSI]

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-21 12:24:08 +01:00
Biju Das
3838ef5901 ARM: dts: iwg22d-sodimm: Sound PIO support
Enable sound PIO support on carrier board.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-21 12:22:19 +01:00
Biju Das
55e37da030 ARM: dts: iwg22d-sodimm: Enable SGTL5000 audio codec
This patch enables SGTL5000 audio codec on the carrier board.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-21 12:21:55 +01:00
Biju Das
17d2e479d0 ARM: dts: r8a7745: Add sound support
Define the generic r8a7745(RZ/G1E) part of the sound device node.

This patch is based on the r8a7794 sound work by Sergei Shtylyov.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-21 12:21:40 +01:00
Biju Das
a14a05c2f3 ARM: dts: r8a7745: Add audio DMAC support
Instantiate the audio DMA controller on the r8a7745 device tree.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-21 12:21:17 +01:00
Biju Das
44da63157d ARM: dts: r8a7745: Add audio clocks
Describe the external audio clocks required by the sound driver.
Boards that provide audio clocks need to override the clock frequencies.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-21 12:20:49 +01:00