Commit graph

932,869 commits

Author SHA1 Message Date
Ian Molton
eeef8a5da7 brcmfmac: Tidy register definitions a little
Trivial tidy of register definitions.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-14 14:41:00 +02:00
Ian Molton
71bd508d7d brcmfmac: Rename / replace old IO functions with simpler ones.
Primarily this patch removes:

brcmf_sdiod_f0_writeb()
brcmf_sdiod_reg_write()
brcmf_sdiod_reg_read()

Since we no longer use the quirky method of deciding which function to
address via the address being accessed, take the opportunity to rename
some IO functions more in line with common kernel code. We also convert
those that map directly to sdio_{read,write}*() to macros.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-14 14:41:00 +02:00
Ian Molton
a7323378dc brcmfmac: Clarify if using braces.
Whilst this if () statement is technically correct, it lacks clarity.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-14 14:40:59 +02:00
Ian Molton
6e24dd012b brcmfmac: whitespace fixes in brcmf_sdiod_send_buf()
Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
[arend: mention function in patch subject]
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-14 14:40:58 +02:00
Ian Molton
8f13c87ccc brcmfmac: Split brcmf_sdiod_buffrw function up.
This function needs to be split up into separate read / write variants
for clarity.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-14 14:40:58 +02:00
Colin Ian King
18907f20ea brcmsmac: use ARRAY_SIZE on rfseq_updategainu_events
Use the ARRAY_SIZE macro on rfseq_updategainu_events to determine
size of the array. Improvement suggested by coccinelle.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-14 14:40:08 +02:00
Daniel Borkmann
7310c23328 Merge branch 'bpf-bpftool-cgroup-ops'
Roman Gushchin says:

====================
This patchset adds basic cgroup bpf operations to bpftool.

Right now there is no convenient way to perform these operations.
The /samples/bpf/load_sock_ops.c implements attach/detacg operations,
but only for BPF_CGROUP_SOCK_OPS programs. Bps (part of bcc) implements
bpf introspection, but lacks any cgroup-related specific.

I find having a tool to perform these basic operations in the kernel tree
very useful, as it can be used in the corresponding bpf documentation
without creating additional dependencies. And bpftool seems to be
a right tool to extend with such functionality.

v4:
  - ATTACH_FLAGS and ATTACH_TYPE are listed and described in docs and usage
  - ATTACH_FLAG names converted to "multi" and "override"
  - do_attach() recognizes ATTACH_FLAG abbreviations, e.g "mul"
  - Local variables sorted ("reverse Christmas tree")
  - unknown attach flags value will be never truncated

v3:
  - SRC replaced with OBJ in prog load docs
  - Output unknown attach type in hex
  - License header in SPDX format
  - Minor style fixes (e.g. variable reordering)

v2:
  - Added prog load operations
  - All cgroup operations are looking like bpftool cgroup <command>
  - All cgroup-related stuff is moved to a separate file
  - Added support for attach flags
  - Added support for attaching/detaching programs by id, pinned name, etc
  - Changed cgroup detach arguments order
  - Added empty json output for succesful programs
  - Style fixed: includes order, strncmp and macroses, error handling
  - Added man pages

v1:
  https://lwn.net/Articles/740366/
====================

Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-14 13:37:14 +01:00
Roman Gushchin
5ccda64d38 bpftool: implement cgroup bpf operations
This patch adds basic cgroup bpf operations to bpftool:
cgroup list, attach and detach commands.

Usage is described in the corresponding man pages,
and examples are provided.

Syntax:
$ bpftool cgroup list CGROUP
$ bpftool cgroup attach CGROUP ATTACH_TYPE PROG [ATTACH_FLAGS]
$ bpftool cgroup detach CGROUP ATTACH_TYPE PROG

Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-14 13:37:13 +01:00
Roman Gushchin
49a086c201 bpftool: implement prog load command
Add the prog load command to load a bpf program from a specified
binary file and pin it to bpffs.

Usage description and examples are given in the corresponding man
page.

Syntax:
$ bpftool prog load OBJ FILE

FILE is a non-existing file on bpffs.

Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-14 13:37:13 +01:00
Roman Gushchin
fe4d44b23f libbpf: prefer global symbols as bpf program name source
Libbpf picks the name of the first symbol in the corresponding
elf section to use as a program name. But without taking symbol's
scope into account it may end's up with some local label
as a program name. E.g.:

$ bpftool prog
1: type 15  name LBB0_10    tag 0390a5136ba23f5c
	loaded_at Dec 07/17:22  uid 0
	xlated 456B  not jited  memlock 4096B

Fix this by preferring global symbols as program name.

For instance:
$ bpftool prog
1: type 15  name bpf_prog1  tag 0390a5136ba23f5c
	loaded_at Dec 07/17:26  uid 0
	xlated 456B  not jited  memlock 4096B

Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-14 13:37:13 +01:00
Roman Gushchin
583c90097f libbpf: add ability to guess program type based on section name
The bpf_prog_load() function will guess program type if it's not
specified explicitly. This functionality will be used to implement
loading of different programs without asking a user to specify
the program type. In first order it will be used by bpftool.

Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-14 13:37:13 +01:00
Miquel Raynal
707d81545d mtd: nand: samsung: add ECC requirements for K9F4G08U0D
Samsung NAND chip K9F4G08U0D minimum ECC strength requirement is 1 bit
per 512 bytes. As the chip is not ONFI nor JEDEC and because of the lack
of these values, boards using it fail to probe the NAND controller
driver. Fix this by setting up the default values.

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-12-14 13:34:23 +01:00
Boris Brezillon
aeb93af96d mtd: nand: Only allocate ecc->{calc, code}_buf when actually needed
The only users of the ecc->{calc,code}_buf buffers are NAND controller
drivers implementing ecc->calculate() and/or ecc->correct(). Since the
->oobsize can be non-negligle, especially on modern NAND devices, we'd
better allocate it only when it is actually required.

Make ecc->{calc,code}_buf allocation dependent on the presence of
ecc->calculate() or ecc->correct().

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-14 13:34:23 +01:00
Boris Brezillon
8c677541bb mtd: nand: denali: Avoid using ecc->code_buf as a temporary buffer
ECC bytes are contiguous in the ->oob_poi buffer, which means we don't
have to copy them into ->code_buf (here used as a temporary buffer)
before passing them to the nand_check_erased_ecc_chunk() function.

This change will allow us to allocate ecc->{code,calc}_buf only when
ecc->calculate() or ecc->correct() is specified.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-14 13:34:22 +01:00
RogerCC Lin
98dea8d719 mtd: nand: mtk: Support MT7622 NAND flash controller.
Add tables to support MT7622 NAND flash controller.

Signed-off-by: RogerCC Lin <rogercc.lin@mediatek.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-12-14 13:34:22 +01:00
RogerCC Lin
b45ee5501e mtd: nand: mtk: Support different MTK NAND flash controller IP
MT7622 uses an MTK's earlier NAND flash controller IP which support
different sector size, max spare size per sector and paraity bits...,
some register's offset and definition also been changed in the NAND
flash controller, this patch is the preparation to support MT7622
NAND flash controller.

MT7622 NFC and ECC engine are similar to MT2701's, except below
differences:
(1)MT7622 NFC's max sector size(ECC data size) is 512 bytes, and
   MT2701's is 1024, and MT7622's max sector number is 8.
(2)The parity bit of MT7622 is 13, MT2701 is 14.
(3)MT7622 ECC supports less ECC strength, max to 16 bit ecc strength.
(4)MT7622 supports less spare size per sector, max spare size per
   sector is 28 bytes.
(5)Some register's offset are different, include ECC_ENCIRQ_EN,
   ECC_ENCIRQ_STA, ECC_DECDONE, ECC_DECIRQ_EN and ECC_DECIRQ_STA.
(6)ENC_MODE of ECC_ENCCNFG register is moved from bit 5-6 to bit 4-5.

Signed-off-by: RogerCC Lin <rogercc.lin@mediatek.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-12-14 13:34:21 +01:00
RogerCC Lin
624d5abf6c mtd: nand: mtk: update DT bindings
Add MT7622 NAND Flash Controller dt bindings documentation.

Signed-off-by: RogerCC Lin <rogercc.lin@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-12-14 13:34:21 +01:00
Ladislav Michl
f170c6fb70 mtd: onenand: Remove obsolete url from Kconfig help
Samsung website no longer host information about OneNAND,
delete it.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-12-14 13:34:20 +01:00
Masahiro Yamada
958ef111cc mtd: nand: cafe: clean up DMA address setup
Use macros from <linux/kernel.h> to make the code readable.
The compiler warning will be kept suppressed.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-12-14 13:34:20 +01:00
Masahiro Yamada
c0313b966a mtd: nand: squash struct nand_buffers into struct nand_chip
struct nand_buffers is malloc'ed in nand_scan_tail() just for
containing three pointers.  Squash this struct into nand_chip.

Move and rename as follows:

  chip->buffers->ecccalc   ->  chip->ecc.calc_buf
  chip->buffers->ecccode   ->  chip->ecc.code_buf
  chip->buffers->databuf   ->  chip->data_buf

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-12-14 13:34:19 +01:00
Masahiro Yamada
8b311ead8b mtd: nand: remove unused NAND_OWN_BUFFERS flag
The last/only user of NAND_OWN_BUFFERS (cafe_nand.c) has been reworked.
This flag is no longer needed.

Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-12-14 13:34:19 +01:00
Masahiro Yamada
f880b07bf1 mtd: nand: cafe: remove use of NAND_OWN_BUFFERS
This driver is the last/only user of NAND_OWN_BUFFERS.  Boris suggested
to remove this flag.

Taking a closer look at this driver, it calls dma_alloc_coherent() for
the concatenated area for the DMA bounce buffer + struct nand_buffers,
but the latter does not need to be DMA-coherent; cafe_{write,read}_buf
simply do memcpy() between buffers when usedma==1.

Let's do dma_alloc_coherent() for the DMA bounce buffer in the front,
and leave the nand_buffers allocation to nand_scan_tail(), then rip off
NAND_OWN_BUFFERS.

The magic number, 2112, is still mysterious (hard-coded writesize +
oobsize ?), but this is not our main interest.  I am keeping it.

Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-12-14 13:34:18 +01:00
Miquel Raynal
17fa804418 mtd: nand: provide valid ->data_interface during NAND detection
Right now, the chip->data_interface field is populated in
nand_scan_tail(), so after the whole NAND detection has taken place.
This is fine because these timings are not yet used by the core so
early in the probe process, but the situation is about to change with
the introduction of ->exec_op().

Also, by convention, nand_scan_ident() is not supposed to allocate
resources, only nand_scan_tail() can, so this prevent us from
allocating and initializing the data_interface object in
nand_scan_ident().

In order to solve this problem, directly embed a data_interface object
in nand_chip so that we don't have to allocate it, and initialize it to
ONFI SDR mode 0 at the very beginning of nand_scan_ident().

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-12-14 13:34:18 +01:00
Boris Brezillon
25f815f66a mtd: nand: force drivers to explicitly send READ/PROG commands
The core currently send the READ0 and SEQIN+PAGEPROG commands in
nand_do_read/write_ops(). This is inconsistent with
->read/write_oob[_raw]() hooks behavior which are expected to send
these commands.

There's already a flag (NAND_ECC_CUSTOM_PAGE_ACCESS) to inform the core
that a specific controller wants to send the READ/SEQIN+PAGEPROG
commands on its own, but it's an opt-in flag, and existing drivers are
unlikely to be updated to pass it.

Moreover, some controllers cannot dissociate the READ/PAGEPROG commands
from the associated data transfer and ECC engine activation, and
developers have to hack things in their ->cmdfunc() implementation to
handle such complex cases, or have to accept the perf penalty of sending
twice the same command.
To address this problem we are planning on adding a new interface which
is passed all information about a NAND operation (including the amount
of data to transfer) and replacing all calls to ->cmdfunc() to calls to
this new ->exec_op() hook. But, in order to do that, we need to have all
->cmdfunc() calls placed near their associated ->read/write_buf/byte()
calls.

Modify the core and relevant drivers to make NAND_ECC_CUSTOM_PAGE_ACCESS
the default case, and remove this flag.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
[miquel.raynal@free-electrons.com: tested, fixed and rebased on nand/next]
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-14 13:34:17 +01:00
Boris Brezillon
97d90da8a8 mtd: nand: provide several helpers to do common NAND operations
This is part of the process of removing direct calls to ->cmdfunc()
outside of the core in order to introduce a better interface to execute
NAND operations.

Here we provide several helpers and make use of them to remove all
direct calls to ->cmdfunc(). This way, we can easily modify those
helpers to make use of the new ->exec_op() interface when available.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
[miquel.raynal@free-electrons.com: rebased and fixed some conflicts]
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-14 13:34:12 +01:00
Geert Uytterhoeven
c99182f73c
spi: sh-msiof: Document hardware limitations related to chip selects
Guide users to maintain the proper balance between native and GPIO chip
selects.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-14 11:46:19 +00:00
Geert Uytterhoeven
b8761434bd
spi: sh-msiof: Implement cs-gpios configuration
The current support for GPIO chip selects assumes the GPIOs have been
configured by platform code or the boot loader.  This includes pinmux
setup and GPIO direction.  Hence it does not work as expected when just
described in DT using the "cs-gpios" property.

Fix this by:
  1. using devm_gpiod_get_index() to request the GPIO, and thus
     configure pinmux, if needed,
  2. configuring the GPIO direction is the spi_master.setup() callback.

Use gpio_is_valid() instead of a check on positive numbers.

Note that when using GPIO chip selects, at least one native chip select
must be left unused, as that native chip select will be driven anyway,
and (global) native chip select polarity must be taken into account.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-14 11:46:14 +00:00
Geert Uytterhoeven
9cce882bed
spi: sh-msiof: Extend support to 3 native chip selects
Currently only the MSIOF_SYNC signal can be used as a native chip
select.  Extend support to up to 3 native chipselects using the
MSIOF_SS1 and MSIOF_SS2 signals.

Inspired by a patch in the BSP by Hiromitsu Yamasaki.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-14 11:46:07 +00:00
Geert Uytterhoeven
7ff0b53c40
spi: sh-msiof: Avoid writing to registers from spi_master.setup()
The spi_master.setup() callback must not change configuration registers,
as that could corrupt I/O that is in progress for other SPI slaves.

The only exception is the configuration of the native chip select
polarity in SPI master mode, as a wrong chip select polarity will cause
havoc during all future transfers to any other SPI slave.

Hence stop writing to registers in sh_msiof_spi_setup(), unless it is
the first call for a controller using a native chip select, or unless
native chip select polarity has changed (note that you'll loose anyway
if I/O is in progress).  Even then, only do what is strictly necessary,
instead of calling sh_msiof_spi_set_pin_regs().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-14 11:46:02 +00:00
Stefan Brüns
5742240577 media: dvbsky: MyGica T230C support
Mygica T230 DVB-T/T2/C USB stick support. It uses the same FX2/Si2168
bridge/demodulator combo as the other devices supported by the driver,
but uses the Si2141 tuner.
Several DVB-T (MPEG2) and DVB-T2 (H.265) channels were tested, as well as
the included remote control.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-14 06:35:18 -05:00
oder_chiou@realtek.com
958d022e32
ASoC: rt5663: Fix the wrong result of the first jack detection
In the first jack detection while booting, the result will always show as
headset, even we insert the headphone.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-14 11:13:33 +00:00
Sean Wang
b96a696fb2 arm: dts: mt7623: fix card detection issue on bananapi-r2
Fix that bananapi-r2 booting from SD-card would fail since incorrect
polarity is applied to the previous setup with GPIO_ACTIVE_HIGH.

Cc: stable@vger.kernel.org
Fixes: 0eed8d0976 ("arm: dts: mt7623: Add SD-card and EMMC to bananapi-r2")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-12-14 12:12:35 +01:00
Sean Wang
3e2af57976 arm: dts: mt7623: update mmc related nodes with the appropriate fallback
The current mmc related nodes should be falling back to MT2701
as the dt-binding defines and which has more appropriate setup
for MT7623.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-12-14 12:12:35 +01:00
Chen-Yu Tsai
2ff739b9bd
ASoC: sun4i-i2s: Show detailed error when DAI configuration callbacks fail
When any of the DAI hardware configuration callbacks (.hw_param,
.set_fmt, .set_sysclk) fails, there is no explanation about why it
failed. This is particularly confusing for .hw_param, which covers
many parameters of the DAI. Telling the users what parameter isn't
supported, and what the requested value was goes a long way for
developers trying to combine sun4i-i2s with external codecs.

This patch adds dev_err calls explaining what isn't supported or
failed, and what the value was. sun4i_i2s_set_clk_rate()'s first
parameter was changed to a struct snd_soc_dai *dai, so we can
get the underlying device.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-14 11:12:28 +00:00
Matthias Brugger
ae72e95b5e arm: dts: mt2701: Add reset-cells
The hifsys and ethsys needs the definition of the reset-cells
property. Fix this.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-12-14 12:07:58 +01:00
Matthias Brugger
76a09ce214 arm: dts: mt7623: Update ethsys binding
The ethsys binding misses the reset-cells, this patch
adds this property.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-12-14 12:07:41 +01:00
Dmitry Osipenko
cd6c56feb5 media: staging: media: Introduce NVIDIA Tegra video decoder driver
NVIDIA Tegra20/30/114/124/132 SoC's have video decoder engine that
supports standard set of video formats like H.264 / MPEG-4 / WMV / VC1.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-14 06:04:34 -05:00
Dmitry Osipenko
94e53262a2 media: dt: bindings: Add binding for NVIDIA Tegra Video Decoder Engine
Add binding documentation for the Video Decoder Engine which is found
on NVIDIA Tegra20/30/114/124/132 SoC's.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-14 05:56:34 -05:00
Mark Rutland
1d08a044cf arm64: fix CONFIG_DEBUG_WX address reporting
In ptdump_check_wx(), we pass walk_pgd() a start address of 0 (rather
than VA_START) for the init_mm. This means that any reported W&X
addresses are offset by VA_START, which is clearly wrong and can make
them appear like userspace addresses.

Fix this by telling the ptdump code that we're walking init_mm starting
at VA_START. We don't need to update the addr_markers, since these are
still valid bounds regardless.

Cc: <stable@vger.kernel.org>
Fixes: 1404d6f13e ("arm64: dump: Add checking for writable and exectuable pages")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <labbott@redhat.com>
Reported-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-12-14 10:18:23 +00:00
Amir Goldstein
da2e6b7eed ovl: fix overlay: warning prefix
Conform two stray warning messages to the standard overlayfs: prefix.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-12-14 11:14:52 +01:00
Jia-Ju Bai
c7b8f77872 USB: serial: io_edgeport: fix possible sleep-in-atomic
According to drivers/usb/serial/io_edgeport.c, the driver may sleep
under a spinlock.
The function call path is:
edge_bulk_in_callback (acquire the spinlock)
   process_rcvd_data
     process_rcvd_status
       change_port_settings
         send_iosp_ext_cmd
           write_cmd_usb
             usb_kill_urb --> may sleep

To fix it, the redundant usb_kill_urb() is removed from the error path
after usb_submit_urb() fails.

This possible bug is found by my static analysis tool (DSAC) and checked
by my code review.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
2017-12-14 10:32:29 +01:00
Qiufang Dai
78b4af312f clk: meson-axg: add clock controller drivers
Add clock controller drivers for Amlogic Meson-AXG SoC.

Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-14 10:19:37 +01:00
Jerome Brunet
13ca131420 Merge branch 'next/dt' into next/drivers
* next/dt:
  clk: meson-axg: add clocks dt-bindings required header
  dt-bindings: clock: add compatible variant for the Meson-AXG
2017-12-14 10:18:46 +01:00
Qiufang Dai
7e5c90e0ed clk: meson-axg: add clocks dt-bindings required header
Add the required header for the clocks ID dt-bindings
exported from various subsystem in the Meson-AXG SoC.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-14 10:14:20 +01:00
Yixun Lan
f8d0dfed51 dt-bindings: clock: add compatible variant for the Meson-AXG
Update the documentation to support clock driver for the Amlogic's
Meson-AXG SoC.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-14 10:14:12 +01:00
Yixun Lan
27aad90548 clk: meson: make the spinlock naming more specific
Make the spinlock more specific, so better for lockdep
debugging and ctags/grep.

Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-14 10:12:41 +01:00
Chris Wilson
2cf654db8d drm/i915/fence: Use rcu to defer freeing of irq_work
It is illegal to perform an immediate free of the struct irq_work from
inside the irq_work callback (as irq_work_run_list modifies work->flags
after execution of the work->func()). As we use the irq_work to
coordinate the freeing of the callback from two different softirq paths,
we need to defer the kfree from inside our irq_work callback, for which
we can use kfree_rcu.

Fixes: 81c0ed21aa ("drm/i915/fence: Avoid del_timer_sync() from inside a timer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213094802.28243-1-chris@chris-wilson.co.uk
(cherry picked from commit 7d622351c9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-12-14 10:58:59 +02:00
Chris Wilson
74c7b0782b drm/i915: Stop listening to request resubmission from the signaler kthread
The intent here was that we would be listening to
i915_gem_request_unsubmit in order to cancel the signaler quickly and
release the reference on the request. Cancelling the signaler is done
directly via intel_engine_cancel_signaling (called from unsubmit), but
that does not directly wake up the signaling thread, and neither does
setting the request->global_seqno back to zero wake up listeners to the
request->execute waitqueue. So the only time that listening to the
request->execute waitqueue would wake up the signaling kthread would be
on the request resubmission, during which time we would already receive
wake ups from rejoining the global breadcrumbs wait rbtree.

Trying to wake up to release the request remains an issue. If the
signaling was cancelled and no other request required signaling, then it
is possible for us to shutdown with the reference on the request still
held. To ensure that we do not try to shutdown, leaking that request, we
kick the signaling threads whenever we disarm the breadcrumbs, i.e. on
parking the engine when idle.

v2: We do need to be sure to release the last reference on stopping the
kthread; asserting that it has been dropped already is insufficient.

Fixes: d6a2289d9d ("drm/i915: Remove the preempted request from the execution queue")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208121033.5236-1-chris@chris-wilson.co.uk
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
(cherry picked from commit 776bc27fd8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-12-14 10:58:50 +02:00
Chris Wilson
2b3a2e9f40 drm/i915: Drop fb reference on load_detect_pipe failure path
When intel_modeset_setup_plane_state() fails drop the local framebuffer
reference before jumping to the error, otherwise we leak the framebuffer.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: edde361711 ("drm/i915: Use atomic state to obtain load detection crtc, v3.")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171207220025.22698-1-chris@chris-wilson.co.uk
(cherry picked from commit 3e72be177c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-12-14 10:58:23 +02:00
Chris Wilson
2797c4a11f drm/i915: Flush pending GTT writes before unbinding
From the shrinker paths, we want to relinquish the GPU and GGTT access to
the object, releasing the backing storage back to the system for
swapout. As a part of that process we would unpin the pages, marking
them for access by the CPU (for the swapout/swapin). However, if that
process was interrupted after unbind the vma, we missed a flush of the
inflight GGTT writes before we made that GTT space available again for
reuse, with the prospect that we would redirect them to another page.

The bug dates back to the introduction of multiple GGTT vma, but the
code itself dates to commit 02bef8f98d ("drm/i915: Unbind closed vma
for i915_gem_object_unbind()").

Fixes: 02bef8f98d ("drm/i915: Unbind closed vma for i915_gem_object_unbind()")
Fixes: c5ad54cf7d ("drm/i915: Use partial view in mmap fault handler")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171204132513.7303-1-chris@chris-wilson.co.uk
(cherry picked from commit 5888fc9eac)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-12-14 10:58:06 +02:00