After GPU reset, GuC HW needs to be reinitialized (with FW reload).
Unfortunately, we're doing some extra work there (mostly allocating stuff),
work that can be moved to guc_init and called once at driver load time.
As a side effect we're no longer hitting an assert in
i915_ggtt_enable_guc on suspend/resume.
v2: Do not duplicate disable_communication / reset_guc_interrupts
v3: Add proper teardown after rebase
References: 04f7b24ecc ("drm/i915/guc: Assert that we switch between known ggtt->invalidate functions")
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-3-michal.winiarski@intel.com
This patch adds extcon notifier callback to set the mode of
host/peripheral by using extcon state (e.g phy-rcar-gen3-usb2) for
non-otg channel (e.g. R-Car D3).
[Fengguang Wu: fixed sparse warning]
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
usb: renesas_usbhs: usbhs_rcar3_notifier() can be static
Fixes: 3a7cce26122e ("usb: renesas_usbhs: add extcon notifier to set mode for non-otg channel")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
This case can been seen when creating the lease with the same objects passed.
[ 605.515097] 2 locks held by testapp/3337:
[ 605.519027] #0: (&dev->mode_config.idr_mutex){......}, at: [<ffff0000085f1664>] drm_mode_create_lease_ioctl+0x384/0x858
[ 605.530045] #1: (&dev->mode_config.idr_mutex){......}, at: [<ffff0000085f11bc>] drm_lease_destroy+0x2c/0x110
Which was causing the process to hang:
[ 605.398827] [<ffff0000080856cc>] __switch_to+0x94/0xa8
[ 605.404030] [<ffff000008c05d00>] __schedule+0x1b0/0x698
[ 605.409322] [<ffff000008c06224>] schedule+0x3c/0xa8
[ 605.414260] [<ffff000008c06628>] schedule_preempt_disabled+0x20/0x38
[ 605.420677] [<ffff000008c07370>] mutex_lock_nested+0x158/0x340
[ 605.426572] [<ffff0000085f11bc>] drm_lease_destroy+0x2c/0x110
[ 605.432389] [<ffff0000085cecf0>] drm_master_put+0xc0/0xc8
[ 605.437845] [<ffff0000085f175c>] drm_mode_create_lease_ioctl+0x47c/0x858
[ 605.444612] [<ffff0000085d4460>] drm_ioctl+0x198/0x448
[ 605.449811] [<ffff000008201134>] do_vfs_ioctl+0xa4/0x748
[ 605.455192] [<ffff000008201864>] SyS_ioctl+0x8c/0xa0
[ 605.460216] [<ffff000008082f4c>] __sys_trace_return+0x0/0x4
drm_mode_create_lease_ioctl() calls drm_lease_create() which acquires a lock
on dev->mode_config.idr_mutex. In case of failure, drm_lease_create() calls
drm_master_put() which in turn tries to acquire the same lock when calling
drm_lease_destroy().
v2: - Reverse the order at exit in case of fail, so that unlocking takes place
before dropping the reference.
- Include detail information about deadlock (Daniel Vetter)
Signed-off-by: Marius Vlad <marius-cristian.vlad@nxp.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213181048.32719-1-marius-cristian.vlad@nxp.com
- Clean up duplicate includes
- Remove ancient 'no-alloc' crap code that occasionally caused hard fs
shutdowns due to lack of proper space reservations
- Fix regression in FIEMAP behavior when reporting xattr extents
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=cmic
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.15-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Here are a few more bug fixes & cleanups for 4.15-rc4:
- clean up duplicate includes
- remove ancient 'no-alloc' crap code that occasionally caused hard
fs shutdowns due to lack of proper space reservations
- fix regression in FIEMAP behavior when reporting xattr extents"
* tag 'xfs-4.15-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: make iomap_begin functions trim iomaps consistently
xfs: remove "no-allocation" reservations for file creations
fs: xfs: remove duplicate includes
This pull request contains three small fixes that I'm hoping to get into
4.15-rc4:
* A fix to a typo in sys_riscv_flush_icache. This only effects error
handling, but I think it's a small and obvious enough change that it's
sane outside the merge window.
* The addition of smp_mb__after_spinlock(), which was recently removed
due to an incorrect comment. This is largly a comment change (as
there's a big one now), and while it's necessary for complience with
the RISC-V memory model the lack of this fence shouldn't manifest as a
bug on current implementations. Nonetheless, it still seems saner to
have the fence in 4.15.
* The removal of some of the HVC_RISCV_SBI driver that snuck into the
arch port. This is compile-time dead code in 4.15 (as the driver
isn't in yet), and during the review process we found a better way to
implement early printk on RISC-V. While this change doesn't do
anything, it will make staging our HVC driver easier: without this
change the HVC driver we hope to upstream won't build on 4.15 (because
the 4.15 arch code would reference a function that no longer exists).
Additionally, I'm instituting a bit of a process change so I don't
submit things too quickly again:
* All the patches I submit during an RC will be from the week before, so
everyone has gotten a chance to see them and they've made it through
our autobuilders and integration trees.
* I'll cherry-pick (single patches) or merge (if it's a patch set) on
top of the new RC on Monday morning.
* I'll sign the tag on Monday morning, to let the autobuilders pick up
exactly what I'm submitting.
* Assuming nothing goes wrong, I'll mail the pull request out on
Wednesday. If something goes wrong, I'll wait at least a day after
re-spinning the tag to let the autobuilders pick things up.
Hopefully this will avoid any headaches in the future, barring any
emergency fixes.
I don't think this is the last patch set we'll want for 4.15: I think
I'll want to remove some of the first-level irqchip driver that snuck in
as well, which will look a lot like the HVC patch here. This is pending
some asm-generic cleanup I'm doing that I haven't quite gotten clean
enough to send out yet, though, but hopefully it'll be ready by next
week (and still OK for that late).
-----BEGIN PGP SIGNATURE-----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=FRZX
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-4.15-rc4-riscv_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux
Pull RISC-V fixes from Palmer Dabbelt:
"This contains three small fixes:
- A fix to a typo in sys_riscv_flush_icache. This only effects error
handling, but I think it's a small and obvious enough change that
it's sane outside the merge window.
- The addition of smp_mb__after_spinlock(), which was recently
removed due to an incorrect comment. This is largly a comment
change (as there's a big one now), and while it's necessary for
complience with the RISC-V memory model the lack of this fence
shouldn't manifest as a bug on current implementations.
Nonetheless, it still seems saner to have the fence in 4.15.
- The removal of some of the HVC_RISCV_SBI driver that snuck into the
arch port. This is compile-time dead code in 4.15 (as the driver
isn't in yet), and during the review process we found a better way
to implement early printk on RISC-V. While this change doesn't do
anything, it will make staging our HVC driver easier: without this
change the HVC driver we hope to upstream won't build on 4.15
(because the 4.15 arch code would reference a function that no
longer exists).
I don't think this is the last patch set we'll want for 4.15: I think
I'll want to remove some of the first-level irqchip driver that snuck
in as well, which will look a lot like the HVC patch here. This is
pending some asm-generic cleanup I'm doing that I haven't quite gotten
clean enough to send out yet, though, but hopefully it'll be ready by
next week (and still OK for that late)"
* tag 'riscv-for-linus-4.15-rc4-riscv_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux:
RISC-V: Remove unused CONFIG_HVC_RISCV_SBI code
RISC-V: Resurrect smp_mb__after_spinlock()
RISC-V: Logical vs Bitwise typo
Some of the divider settings are preconfigured and should not
be changed by the clock framework during frequency change. This
patch adds the read-only divider operation for QCOM alpha pll
post divider which is equivalent to generic divider operations in
'commit 79c6ab5095 ("clk: divider: add CLK_DIVIDER_READ_ONLY flag")'.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Current PLL driver only supports 4 bit PLL post divider so
modified the PLL divider operations to support 2 bit PLL
post divider.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The Brammo type of Alpha PLL doesn't allow configuration of a
VCO, but it does support dynamic update in which the frequency
can be changed dynamically without turning off the PLL.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The Huayra type Alpha PLL has a 16 bit alpha value, and
depending on the alpha_mode, the alpha value can be treated as
M/N value or as a two’s compliment number. This PLL supports
dynamic programming.
Since the decoding of alpha val and dynamic programming are
completely different from other Alpha PLLs we add separate
functions for Huayra PLLs.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Some of the Alpha PLLs support dynamic update in which the
frequency can be changed dynamically without turning off the PLL.
This dynamic update requires the following sequence:
1. Write the desired values to L_VAL and ALPHA_VAL registers
2. Toggle pll_latch_input from low to high
3. Wait for pll_ack_latch to transition from low to high
The new L and alpha values have been latched. It may
take some time for the PLL to fully settle with these
new values.
4. Pull pll_latch_input low
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
RV implementation was missing these callbacks. Used
to fetch the clock values for other components.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Borkmann says:
====================
pull-request: bpf 2017-12-13
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Addition of explicit scheduling points to map alloc/free
in order to avoid having to hold the CPU for too long,
from Eric.
2) Fixing of a corruption in overlapping perf_event_output
calls from different BPF prog types on the same CPU out
of different contexts, from Daniel.
3) Fallout fixes for recent correction of broken uapi for
BPF_PROG_TYPE_PERF_EVENT. um had a missing asm header
that needed to be pulled in from asm-generic and for
BPF selftests the asm-generic include did not work,
so similar asm include scheme was adapted for that
problematic header that perf is having with other
header files under tools, from Daniel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
No longer used.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The expectation is that the base driver doesn't mess with these.
Some components interact with these directly so let the components
handle these directly.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The expectation is that the base driver doesn't mess with these.
Some components interact with these directly so let the components
handle these directly.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The golden register arrays were empty so the function was
effectively useless.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They are not used any longer. We get the scratch register
locations from the vbios directly now.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cleans up and consolidates all of the per-asic logic.
v2: squash in "drm/amdgpu: fix NULL err for sriov detect" (Chunming)
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PROBE_DEFER also uses system_wq to reprobe drivers, which means when
that again fails, and we try to flush the overall system_wq (to get
all the delayed connectore cleanup work_struct completed), we
deadlock.
Fix this by using just a single cleanup work, so that we can only
flush that one and don't block on anything else. That means a free
list plus locking, a standard pattern.
v2:
- Correctly free connectors only on last ref. Oops (Chris).
- use llist_head/node (Chris).
v3
- Add init_llist_head (Chris).
Fixes: a703c55004 ("drm: safely free connectors from connector_iter")
Fixes: 613051dac4 ("drm: locking&new iterators for connector_list")
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: <stable@vger.kernel.org> # v4.11+: 613051dac4 ("drm: locking&new iterators for connector_list"
Cc: <stable@vger.kernel.org> # v4.11+
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Guillaume Tucker <guillaume.tucker@collabora.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Matt Hart <matthew.hart@linaro.org>
Cc: Thierry Escande <thierry.escande@collabora.co.uk>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213124936.17914-1-daniel.vetter@ffwll.ch
The current configuration does not fully configure PLL alpha mode
and values so this patch
1. Configures PLL_ALPHA_VAL_U for PLL which supports 40 bit alpha.
2. Adds alpha enable and alpha mode configuration support.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Some of the Alpha PLLs (like Spark and Brammo) don't have a
CONFIG_CTL_U register. Add logic to detect when PLLs don't have
this second config register and skip programming it during PLL
initialization.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The alpha value calculation has been written for 40-bit alpha
values which doesn't work work properly for 16-bit ones. The
alpha value is calculated on the basis of ALPHA_BITWIDTH to make
the computation easy for 40 bit alpha. After calculating the 32
bit alpha, it is converted to 40 bit alpha by making lower bits
zero. But if actual alpha register width is less than
ALPHA_BITWIDTH, then the actual width can be used for
calculation. This also means, during the 40 bit alpha pll set
rate path, the lower alpha register is not configured
Change the code to calculate the rate and register values from
'alpha_width' instead of hard-coding it so that it can work for
the different widths that are supported.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Alpha PLL is a generic name used for QCOM PLLs which uses L and
Alpha values for configuring the integer and fractional part.
QCOM SoCs use different types of Alpha PLLs for which basic
software configuration part is common with following differences.
1. All these PLLs have the same basic registers like
PLL_MODE, L_VAL, ALPHA_VAL but some of the register offsets are
different between PLLs types.
2. The dynamic programming sequence is different in some
of the Alpha PLLs
3. Some of the PLLs don’t have 64 bit config control, 64 bit
user control, VCO configuration, etc.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Commit f371b304f1 ("bpf/tracing: allow user space to
query prog array on the same tp") introduced a perf
ioctl command to query prog array attached to the
same perf tracepoint. The commit introduced a
compilation error under certain config conditions, e.g.,
(1). CONFIG_BPF_SYSCALL is not defined, or
(2). CONFIG_TRACING is defined but neither CONFIG_UPROBE_EVENTS
nor CONFIG_KPROBE_EVENTS is defined.
Error message:
kernel/events/core.o: In function `perf_ioctl':
core.c:(.text+0x98c4): undefined reference to `bpf_event_query_prog_array'
This patch fixed this error by guarding the real definition under
CONFIG_BPF_EVENTS and provided static inline dummy function
if CONFIG_BPF_EVENTS was not defined.
It renamed the function from bpf_event_query_prog_array to
perf_event_query_prog_array and moved the definition from linux/bpf.h
to linux/trace_events.h so the definition is in proximity to
other prog_array related functions.
Fixes: f371b304f1 ("bpf/tracing: allow user space to query prog array on the same tp")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tariq Toukan says:
====================
mlx4 misc fixes
This patchset contains misc bug fixes from the team
to the mlx4 Core and Eth drivers.
Patch 1 by Eugenia fixes an MTU issue in selftest.
Patch 2 by Eran fixes an accounting issue in the resource tracker.
Patch 3 by Eran fixes a race condition that causes counter inconsistency.
Series generated against net commit:
200809716a fou: fix some member types in guehdr
v2:
Patch 2: Add reviewer credit, rephrase commit message.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Before this patch, the stats_lock was acquired twice. In between the
locks Driver sent command to gather some more statistics (per priority
and counter statistics). If the stats lock was acquired by get
statistics NDO in between we would have report out of sync counters.
Fix this by collecting all stats from Firmware in advance and then
fill the Software structs under one lock.
Fixes: 0b131561a7 ("net/mlx4_en: Add Flow control statistics display via ethtool")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The field res_free indicates the total number of counters which are
available for allocation (reserved and unreserved). Fixed a bug where
the reserved counters were subtracted from res_free before any
allocation was performed.
Before this fix, free counters which were not reserved could not be
allocated.
Fixes: 9de92c60be ("net/mlx4_core: Adjust counter grant policy in the resource tracker")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set the minimal MTU threshold for running loopback selftest.
MTU should be big enough to include packet payload, NET_IP_ALIGN,
Ethernet headers and preamble length.
Fixes: e7c1c2c462 ("mlx4_en: Added self diagnostics test implementation")
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The BK3 board is a derivative of the ts72xx reference design.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Simplify lan9303_indirect_phy_wait_for_completion()
and lan9303_switch_wait_for_completion() by using a new function
lan9303_read_wait()
Changes v1 -> v2:
- param 'mask' type u32
- removed param 'value' (will probably never be used)
- add newline before return
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit extend the ts72xx_register_flash() to accept passed parameters,
which makes it more reusable.
Now it is possible to accept ep93xx flash start address and partitions.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
This commit adds include file guards to ts72xx.h
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
When in SGMII-to-Copper mode, the fiber page is used for the MAC facing
link, and does not require configuration of the fiber auto-negotiation
settings. Avoid trying.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu will join to maintain dwc-xlgmac.
He will help with new feature development for
this driver. Thanks Jose and welcome on board!
Signed-off-by: Jie Deng <jiedeng@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only the retransmit timer currently refreshes tcp_mstamp
We should do the same for delayed acks and keepalives.
Even if RFC 7323 does not request it, this is consistent to what linux
did in the past, when TS values were based on jiffies.
Fixes: 385e20706f ("tcp: use tp->tcp_mstamp in output path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Mike Maloney <maloney@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Mike Maloney <maloney@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When ms timestamp is used, current logic uses 1us in
tcp_rcv_rtt_update() when the real rcv_rtt is within 1 - 999us.
This could cause rcv_rtt underestimation.
Fix it by always using a min value of 1ms if ms timestamp is used.
Fixes: 645f4c6f2e ("tcp: switch rcv_rtt_est and rcvq_space to high resolution timestamps")
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger says:
====================
hv_netvsc: minor changes
This includes minor cleanup of code in send and receive path and
also a new statistic to check for allocation failures. This also
eliminates some of the extra RCU when not needed.
There is a theoritical bug where buffered data could be blocked
for longer than necessary if the ring buffer got full. This
has not been seen in the wild, found by inspection.
The reference count between net device and internal RNDIS
is not needed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If the transmit queue is known full, then don't keep aggregating
data. And the cp_partial flag which indicates that the current
aggregation buffer is full can be folded in to avoid more
conditionals.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is only ever a single instance of network device object
referencing the internal rndis object. Therefore the open_cnt atomic
is not necessary.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The netvsc_receive_callback function was using RCU to find the
appropriate underlying netvsc_device. Since calling function already
had that pointer, this was unnecessary.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The caller (netvsc_receive) already has the net device pointer,
and should just pass that to functions rather than the hyperv device.
This eliminates several impossible error paths in the process.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When skb can not be allocated, update ethtool statisitics
rather than rx_dropped which is intended for netif_receive.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since only caller does not care about return value.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli says:
====================
PHYLINK preparatory patches for DSA
In preparation for having DSA migrate to PHYLINK, I had to come up with a
number of preparatory patches:
- we need to be able to pass phy_flags from an external component calling
phylink_of_phy_connect()
- DSA tries to connect through OF first, then fallsback using its own internal
MDIO bus, in that case we would both show an error, but also not know what
the correct phy_interface_t would be, instead use the PHY device/driver provided
one
- Finally bcm_sf2 makes use of all possible PHYs out there: internal, external,
fixed, and MoCA, the latter requires a bit of help to signal link notifications
through a MMIO interrupt, as well a report a correct PORT type
Changes in v2:
- rebased against latest net-next/master
- added kernel doc documentation
- dropped error message in phylink_of_phy_connect() as suggested by Russell
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to what PHYLIB already does, make sure that
PHY_INTERFACE_MODE_MOCA is reported as PORT_BNC.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>