Commit graph

932,869 commits

Author SHA1 Message Date
Vincent Legoll
8c9fdd7687 ssb: make SSB a menuconfig to ease disabling it all
No need to get into the submenu to disable all SSB-related
config entries.

This makes it easier to disable all SSB config options
without entering the submenu. It will also enable one
to see that en/dis-abled state from the outside menu.

This is only intended to change menuconfig UI, not change
the config dependencies.

Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:44:47 +02:00
Felix Fietkau
7bc04215a6 mt76: add driver code for MT76x2e
MT76x2e is a 2x2 PCIe 802.11ac chipset by MediaTek. This driver has full
support for AP, station, ad-hoc, mesh and monitor mode.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:35:56 +02:00
Felix Fietkau
17f1de56df mt76: add common code shared between multiple chipsets
This will be used by drivers for MT76x2e, MT7603e and MT7628

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:35:55 +02:00
Felix Fietkau
9402f8eb9b dt-bindings: net: add mt76 wireless device binding
Add documentation describing how device tree can be used to configure
wireless chips supported by the mt76 driver.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:35:54 +02:00
Ashish Kalra
a765c8fdc8 bcma: Adjust block comment
use * for block comments in multiple lines according to kernel coding
style

Reported by: checkpatch.pl

Signed-off-by: Ashish Kalra <eashishkalra@gmail.com>
Reviewed-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:33:02 +02:00
Limin Zhu
c61cfe49f0 mwifiex: cfg80211: do not change virtual interface during scan processing
(1) Change virtual interface operation in cfg80211 process reset and
reinitilize private data structure.
(2) Scan result event processed in main process will dereference private
data structure concurrently, ocassionly crash the kernel.

The cornel case could be trigger by below steps:
(1) wpa_cli mlan0 scan
(2) ./hostapd mlan0.conf

Cfg80211 asynchronous scan procedure is not all the time operated
under rtnl lock, here we add the protect to serialize the cfg80211
scan and change_virtual interface operation.

Signed-off-by: Limin Zhu <liminzhu@marvell.com>
Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:30:57 +02:00
Xinming Hu
71121e420d mwifiex: do not support change AP interface to station mode
Firmware do not support change interface from micro-ap mode
to station mode, forbid this operation

Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:26:27 +02:00
Colin Ian King
c4ee30a280 wlcore, wl1251: fix spelling: "Couldnt" -> "Couldn't" and remove error on -ENOMEM
Trivial fix to spelling mistake in error message text.  Also remove the
error message on an kzalloc failure as this is redundant.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:24:32 +02:00
Reizer, Eyal
37bf241b8e wlcore: allow elp during wowlan suspend
when enabling wowlan and entering suspend the last write to the firmware
allowing it to go into elp mode was not completing before suspend, leaving
the firmware running in full active mode consuming high power.
Use an immediate call instead of a work queue for this last access
allowing the firmware to go into power save during wowlan uspend.

Signed-off-by: Eyal Reizer <eyalr@ti.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:21:40 +02:00
Arnd Bergmann
99f6996d4c wlcore: use boottime for fw time sync
Using getnstimeofday()/timespec_to_ns() causes an overflow on 32-bit
architectures in 2038, and may suffer from time jumps due to
settimeofday() or leap seconds.

I don't see a reason why this needs to be UTC, so either monotonic
or boot time would be better here. Assuming that the fw time keeps
running during suspend, boottime is better than monotonic, and
ktime_get_boot_ns() will also save the additional conversion to
nanoseconds.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:20:01 +02:00
Weixiao Zhang
4628257bf3 mwl8k: Expand non-DFS 5G channels
Add non-DFS 5G upper channels (149-165) besides existed 4 lower channels
(36, 40, 44, 48).

Signed-off-by: Weixiao Zhang <waveletboy@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:17:26 +02:00
Colin Ian King
45d9d1a12e rtlwifi: rtl818x: remove redundant check for cck_power > 15
cck_poweri cannot be greated than 15 as is derived from the bottom 4 bits
from riv->channels[channel - 1].hw_value & 0xf.  Hence the check for it
being greater than 15 is redundant and can be removed.

Detected by CoverityScan, CID#744303 ("Logically dead code")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:16:07 +02:00
Ping-Ke Shih
cf54622c80 rtlwifi: cleanup the code that check whether TX ring is available
Remove the duplicate checking of TX ring's available number, and remove
the variable to store available number that can be calculated by
read/write pointers.

Signed-off-by: Steven Ting <steventing@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:14:52 +02:00
Ping-Ke Shih
dc9682a0cc rtlwifi: fix the wrong size to calculate fifo space
Give correct fifo size to calculate fifo space. Fortunately, the values of
RTL_PCI_MAX_RX_COUNT and TX_DESC_NUM_92E are the same in old code, so it
still works.

Signed-off-by: Steven Ting <steventing@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:14:51 +02:00
Ping-Ke Shih
fb9829e90d rtlwifi: Reduce IO in RX interrupt to boost throughput
Check remaining count of RX packets cost a lot of CPU time, so only update
when the counter decreases to zero. In old flow, the counter was updated
once a RX packet is received.

Signed-off-by: Steven Ting <steventing@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:14:50 +02:00
Larry Finger
78aa601203 rtlwifi: Convert individual interrupt results to struct
With the RTL8822BE and later devices, the number of interrupt vectors
has grown from 2 to 4. At this point, saving and passing those vectors
in a struct makes more sense than using individual scaler variables.

In two of the drivers, code to process the second of the interrupt
registers was included, but commented out. This patch removes those
useless sections.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:13:32 +02:00
Ian Molton
dd8a2d49e4 brcmfmac: Rename bcmerror to err
Trivial cleanup of nasty variable name

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:10:57 +02:00
Ian Molton
12e3e74e28 brcmfmac: Remove noisy debugging.
If you need debugging this low level, you're doing something wrong.
Remove these noisy debug statements so the code is more readable.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:10:56 +02:00
Ian Molton
3508a056a1 brcmfmac: Fix asymmetric IO functions.
Unlikely to be a problem, but brcmf_sdiod_regrl() is
not symmetric with brcmf_sdiod_regrb() in initializing
the data value on stack. Fix that.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
[arend: reword the commit message a bit]
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:10:55 +02:00
Ian Molton
993a98a42e brcmfmac: Remove brcmf_sdiod_request_data()
This function is obfuscating how IO works on this chip. Remove it
and push its logic into brcmf_sdiod_reg_{read,write}().

Handling of -ENOMEDIUM is altered, but as that's pretty much broken anyway
we can ignore that.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:10:53 +02:00
Ian Molton
4a3338ba2a brcmfmac: Remove bandaid for SleepCSR
Register access code is not the place for band-aid fixes like this.
If this is a genuine problem, it should be fixed further up in the driver
stack.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:10:52 +02:00
Ian Molton
ea243e9077 brcmfmac: Remove dead IO code
The value passed to brcmf_sdiod_addrprep() is *always* 4
remove this parameter and the unused code to handle it.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:10:50 +02:00
Ian Molton
b9b0d290bc brcmfmac: Clean up brcmf_sdiod_set_sbaddr_window()
This function sets the address of the IO window used for
SDIO accesses onto the backplane of the chip.

It currently uses 3 separate masks despite the full mask being
defined in the code already. Remove the separate masks and clean up.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:10:49 +02:00
Ian Molton
0fcc9fe004 brcmfmac: Split brcmf_sdiod_regrw_helper() up.
This large function is concealing a LOT of obscure logic about
how the hardware functions. Time to split it up.

This first patch splits the function into two pieces - read and write,
doing away with the rw flag in the process.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:10:49 +02:00
Ian Molton
1e6f676f43 brcmfmac: Register sizes on hardware are not dependent on compiler types
The 4 IO functions in this patch are incorrect as they use compiler types
to determine how many bytes to send to the hardware.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:10:48 +02:00
Ian Molton
1fd3ae124d brcmfmac: Fix parameter order in brcmf_sdiod_f0_writeb()
All the other IO functions are the other way round in this
driver. Make this one match.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:10:48 +02:00
Guneshwor Singh
2b4584d00a ALSA: hda - Add vendor id for Cannonlake HDMI codec
Cannonlake HDMI codec has the same nid as Geminilake. This adds the
codec entry for it.

Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-12-07 13:42:28 +01:00
Jussi Laako
866f7ed7d6 ALSA: usb-audio: Add native DSD support for Esoteric D-05X
Adds VID:PID of Esoteric D-05X to the TEAC device id's.
Renames the is_teac_50X_dac() function to is_teac_dsd_dac() to cover
broader device family from the same corporation sharing the same USB
audio implementation.

Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-12-07 13:42:07 +01:00
Miroslav Benes
c99a2be790 livepatch: force transition to finish
If a task sleeps in a set of patched functions uninterruptedly, it could
block the whole transition indefinitely.  Thus it may be useful to clear
its TIF_PATCH_PENDING to allow the process to finish.

Admin can do that now by writing to force sysfs attribute in livepatch
sysfs directory. TIF_PATCH_PENDING is then cleared for all tasks and the
transition can finish successfully.

Important note! Administrator should not use this feature without a
clearance from a patch distributor. It must be checked that by doing so
the consistency model guarantees are not violated. Removal (rmmod) of
patch modules is permanently disabled when the feature is used. It
cannot be guaranteed there is no task sleeping in such module.

Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-12-07 13:21:35 +01:00
Takuo Koguchi
c810daba0a
spi: sun4i: disable clocks in the remove function
mclk and hclk need to be disabled. Since pm_runtime_disable does
not disable the clocks, use pm_runtime_force_suspend instead.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Takuo Koguchi <takuo.koguchi.sw@hitachi.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-07 11:59:15 +00:00
Geert Uytterhoeven
b458a3490e
spi: rspi: Do not set SPCR_SPE in qspi_set_config_register()
The R-Car Gen2 Hardware User Manual Rev. 2.00 states:

    If the master/slave mode select bit (MSTR) is modified while the SPI
    function enable bit (SPE) is set to 1 (that is, this module is
    enabled), the subsequent operation cannot be guaranteed.

Hence do not set SPCR_SPE when setting SPCR_MSTR, just like the
.set_config_register() implementations for other RSPI variants do.

Note that when booted from QSPI, the boot loader will have set SPCR_MSTR
already, hence usually the bit is never modified by the Linux driver.

Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-07 11:55:38 +00:00
Joonas Lahtinen
d85936ab62 Merge tag 'gvt-fixes-2017-12-06' of https://github.com/intel/gvt-linux into drm-intel-fixes
gvt-fixes-2017-12-06

- Fix invalid hw reg read value for vGPU (Xiong)
- Fix qemu warning on PCI ROM bar missing (Changbin)
- Workaround preemption regression (Zhenyu)

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171206075105.wlh2ojubjczlstox@zhen-hp.sh.intel.com
2017-12-07 13:35:33 +02:00
Wolfram Sang
4c3c9a9d0d i2c: imx: use proper GPIO directions for recovery
When converting to GPIOD, the GPIO directions of SCL/SDA have been
swapped. Fix it!

Fixes: ad36a27959 ("i2c: imx: switch to using gpiod for bus recovery gpios")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-12-07 12:04:12 +01:00
Arvind Yadav
04271ce960 i2c-cht-wc: constify platform_device_id
platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-12-07 12:00:35 +01:00
Hans de Goede
b860b419d9 mfd: Fix RTS5227 (and others) powermanagement
Commit 8275b77a15 ("mfd: rts5249: Add support for RTS5250S power
saving") adds powersaving support for device-ids 5249 524a and 525a.

But as a side effect it breaks ASPM support for all the other device-ids,
causing e.g. the Haswell CPU on a Lenovo T440s to not go into a higher
c-state then PC3, while previously it would go to PC7, causing the
machine to idle at 7.4W instead of 6.6W!

The problem here is the new option.dev_aspm_mode field, which only gets
explicitly initialized in the new code for the device-ids 5249 524a and
525a. Leaving the dev_aspm_mode 0 for the other device-ids.

The default dev_aspm_mode 0 is mapped to DEV_ASPM_DISABLE, but the
old behavior of calling rtsx_pci_enable_aspm() when idle and
rtsx_pci_disable_aspm() when busy happens when dev_aspm_mode ==
DEV_ASPM_DYNAMIC.

This commit changes the enum so that 0 = DEV_ASPM_DYNAMIC matching the
old default behavior, fixing the pm regression with the other device-ids.

Fixes: 8275b77a15 ("mfd: rts5249: Add support for RTS5250S power saving")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rui Feng <rui_feng@realsil.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-12-07 10:40:57 +00:00
Dave Young
01cffe9ded HID: add quirk for another PIXART OEM mouse used by HP
This mouse keep disconnecting in runleve 3 like below, add it needs the
quirk to mute the anoying messages.

[  111.230555] usb 2-2: USB disconnect, device number 6
[  112.718156] usb 2-2: new low-speed USB device number 7 using xhci_hcd
[  112.941594] usb 2-2: New USB device found, idVendor=03f0, idProduct=094a
[  112.984866] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  113.027731] usb 2-2: Product: HP USB Optical Mouse
[  113.069977] usb 2-2: Manufacturer: PixArt
[  113.113500] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:03F0:094A.0002/input/input14
[  113.156787] hid-generic 0003:03F0:094A.0002: input: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:14.0-2/input0
[  173.262642] usb 2-2: USB disconnect, device number 7
[  174.750244] usb 2-2: new low-speed USB device number 8 using xhci_hcd
[  174.935740] usb 2-2: New USB device found, idVendor=03f0, idProduct=094a
[  174.990435] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  175.014984] usb 2-2: Product: HP USB Optical Mouse
[  175.037886] usb 2-2: Manufacturer: PixArt
[  175.061794] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:03F0:094A.0003/input/input15
[  175.084946] hid-generic 0003:03F0:094A.0003: input: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:14.0-2/input0

Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-12-07 11:08:46 +01:00
Hans de Goede
7cb4774e2d HID: core: lower log level for unknown main item tags to warnings
Given all the effort distros have done with splash-screens to give
users a nice clean boot experience, we really want dmesg --level=err
to not print anything unless there is a real problem with either the
hardware or the kernel. Buggy HID descriptors unfortunately happen
all too often, so lower the log level to warning keep the console
clear of error messages such as:

[  441.079664] apple 0005:05AC:0239.0003: unknown main item tag 0x0

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-12-07 11:05:59 +01:00
Colin Ian King
332347d4c7 HID: quirks: make array hid_quirks static
Array hid_quirks is local to the source and does not need to be in
global scope, so make it static.

Cleans up sparse warning:
drivers/hid/hid-quirks.c:29:28: warning: symbol 'hid_quirks' was not
declared. Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-12-07 11:00:55 +01:00
Simon Horman
4f5dc77b83 arm64: dts: renesas: r8a7795: Move nodes which have no reg property out of bus
Move pmu_a5[73], timer and thermal-zones nodes from soc node to root node.
The nodes that have been moved do not have any register properties and thus
shouldn't be placed on the bus.

This problem is flagged by the compiler as follows:
$ make
...
  DTC     arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
  DTC     arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dtb
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
  DTC     arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dtb
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
  DTC     arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb
arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
  DTC     arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb
arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
  DTC     arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dtb
arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
  DTC     arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dtb
arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-12-07 10:58:29 +01:00
Kirill A. Shutemov
6d7e0ba2d2 x86/boot/compressed/64: Print error if 5-level paging is not supported
If the machine does not support the paging mode for which the kernel was
compiled, the boot process cannot continue.

It's not possible to let the kernel detect the mismatch as it does not even
reach the point where cpu features can be evaluted due to a triple fault in
the KASLR setup.

Instead of instantaneous silent reboot, emit an error message which gives
the user the information why the boot fails.

Fixes: 77ef56e4f0 ("x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y")
Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: linux-mm@kvack.org
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20171204124059.63515-3-kirill.shutemov@linux.intel.com
2017-12-07 10:36:26 +01:00
Kirill A. Shutemov
08529078d8 x86/boot/compressed/64: Detect and handle 5-level paging at boot-time
Prerequisite for fixing the current problem of instantaneous reboots when a
5-level paging kernel is booted on 4-level paging hardware.

At the same time this change prepares the decompression code to boot-time
switching between 4- and 5-level paging.

[ tglx: Folded the GCC < 5 fix. ]

Fixes: 77ef56e4f0 ("x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: linux-mm@kvack.org
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20171204124059.63515-2-kirill.shutemov@linux.intel.com
2017-12-07 10:34:39 +01:00
Radhakrishna Sripada
7a8b705350 Revert "drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk"
This reverts commit 8f067837c4.

HSD says "WA withdrawn. It was causing corruption with some images.
WA is not strictly necessary since this bug just causes loss of FBC
compression with some sizes and images, but doesn't break anything."

Fixes: 8f067837c4 ("drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117010825.23118-1-radhakrishna.sripada@intel.com
(cherry picked from commit 0cfecb7c4b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-12-07 11:32:52 +02:00
Prarit Bhargava
947134d9b0 x86/smpboot: Do not use smp_num_siblings in __max_logical_packages calculation
Documentation/x86/topology.txt defines smp_num_siblings as "The number of
threads in a core".  Since commit bbb65d2d36 ("x86: use cpuid vector 0xb
when available for detecting cpu topology") smp_num_siblings is the
maximum number of threads in a core.  If Simultaneous MultiThreading
(SMT) is disabled on a system, smp_num_siblings is 2 and not 1 as
expected.

Use topology_max_smt_threads(), which contains the active numer of threads,
in the __max_logical_packages calculation.

On a single socket, single core, single thread system __max_smt_threads has
not been updated when the __max_logical_packages calculation happens, so its
zero which makes the package estimate fail. Initialize it to one, which is
the minimum number of threads on a core.

[ tglx: Folded the __max_smt_threads fix in ]

Fixes: b4c0a7326f ("x86/smpboot: Fix __max_logical_packages estimate")
Reported-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Prarit Bhargava <prarit@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jakub Kicinski <kubakici@wp.pl>
Cc: netdev@vger.kernel.org
Cc: "netdev@vger.kernel.org"
Cc: Clark Williams <williams@redhat.com>
Link: https://lkml.kernel.org/r/20171204164521.17870-1-prarit@redhat.com
2017-12-07 10:28:22 +01:00
Linus Walleij
c6e40f9639 Merge branch 'ib-move-axp209' of /home/linus/linux-gpio into devel 2017-12-07 10:10:24 +01:00
Chen-Yu Tsai
83fe3be4d1 clk: sunxi-ng: sun50i: a64: Add 2x fixed post-divider to MMC module clocks
On the A64, the MMC module clocks are fixed in the new timing mode,
i.e. they do not have a bit to select the mode. These clocks have
a 2x divider somewhere between the clock and the MMC module.

To be consistent with other SoCs supporting the new timing mode,
we model the 2x divider as a fixed post-divider on the MMC module
clocks.

This patch adds the post-dividers to the MMC clocks.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-12-07 10:09:57 +01:00
Linus Walleij
110e2a38c8 Merge branch 'ib-move-axp209' into devel 2017-12-07 10:09:55 +01:00
Chen-Yu Tsai
946797aa3f clk: sunxi-ng: Support fixed post-dividers on MP style clocks
On the A64, the MMC module clocks are fixed in the new timing mode,
i.e. they do not have a bit to select the mode. These clocks have
a 2x divider somewhere between the clock and the MMC module.

To be consistent with other SoCs supporting the new timing mode,
we model the 2x divider as a fixed post-divider on the MMC module
clocks.

To do this, we first add fixed post-divider to the MP style clocks,
which the MMC module clocks are.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-12-07 10:09:44 +01:00
Boris Brezillon
5bfd40139d drm/vc4: Fix false positive WARN() backtrace on refcount_inc() usage
With CONFIG_REFCOUNT_FULL enabled, refcount_inc() complains when it's
passed a refcount object that has its counter set to 0. In this driver,
this is a valid use case since we want to increment ->usecnt only when
the BO object starts to be used by real HW components and this is
definitely not the case when the BO is created.

Fix the problem by using refcount_inc_not_zero() instead of
refcount_inc() and fallback to refcount_set(1) when
refcount_inc_not_zero() returns false. Note that this 2-steps operation
is not racy here because the whole section is protected by a mutex
which guarantees that the counter does not change between the
refcount_inc_not_zero() and refcount_set() calls.

Fixes: b9f19259b8 ("drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171122203928.28135-1-boris.brezillon@free-electrons.com
2017-12-07 10:09:43 +01:00
Quentin Schulz
e1190083b8 pinctrl: axp209: add support for AXP813 GPIOs
The AXP813 has only two GPIOs. GPIO0 can either be used as a GPIO, an
LDO regulator or an ADC. GPIO1 can be used either as a GPIO or an LDO
regulator.

Moreover, the status bit of the GPIOs when in input mode is not offset
by 4 unlike the AXP209.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-07 10:08:12 +01:00
Quentin Schulz
a0a4b4c242 pinctrl: axp209: add programmable ADC muxing value
To prepare for patches that will add support for a new PMIC that has a
different GPIO adc muxing value, add an adc_mux within axp20x_pctl
structure and use it.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-07 10:07:45 +01:00