Add device tree node with S3FWRN5 NFC chip to TM2(e) boards. The chip is
connected through HS-I2C bus #4.
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
[mszyprow: rebased onto v4.15-rc1, moved node to exynos5433-tm2-common.dtsi,
rephrased commit message]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Enable support for ARM Performance Monitoring Units available in
Cortex-A53 and Cortex-A57 CPU cores for Exynos5433 SoCs.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The etnaviv driver causes a link failure if it is built-in but THERMAL
is built as a module:
drivers/gpu/drm/etnaviv/etnaviv_gpu.o: In function `etnaviv_gpu_bind':
etnaviv_gpu.c:(.text+0x4c4): undefined reference to `thermal_of_cooling_device_register'
etnaviv_gpu.c:(.text+0x600): undefined reference to `thermal_cooling_device_unregister'
drivers/gpu/drm/etnaviv/etnaviv_gpu.o: In function `etnaviv_gpu_unbind':
etnaviv_gpu.c:(.text+0x2aac): undefined reference to `thermal_cooling_device_unregister'
Adding a Kconfig dependency on THERMAL || !THERMAL to avoid this causes
a dependency loop on x86_64:
drivers/gpu/drm/tve200/Kconfig:1:error: recursive dependency detected!
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/tve200/Kconfig:1: symbol DRM_TVE200 depends on CMA
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
mm/Kconfig:489: symbol CMA is selected by DRM_ETNAVIV
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/etnaviv/Kconfig:2: symbol DRM_ETNAVIV depends on THERMAL
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/thermal/Kconfig:5: symbol THERMAL is selected by ACPI_VIDEO
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/acpi/Kconfig:189: symbol ACPI_VIDEO is selected by BACKLIGHT_CLASS_DEVICE
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/video/backlight/Kconfig:158: symbol BACKLIGHT_CLASS_DEVICE is selected by DRM_PARADE_PS8622
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/bridge/Kconfig:62: symbol DRM_PARADE_PS8622 depends on DRM_BRIDGE
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/bridge/Kconfig:1: symbol DRM_BRIDGE is selected by DRM_TVE200
To work around this, add a new option DRM_ETNAVIV_THERMAL to optionally
enable thermal throttling support and make DRM_ETNAVIV select THERMAL
at the same time.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Add a jump target so that a call of the function "mutex_unlock" is stored
only once at the end of this function implementation.
Replace three calls by goto statements.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Add GL.OCCLUSION_QUERY_ADDR (0x03824): address where GPU stores
the occlusion query result.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Now that drivers/i2c/busses/i2c-cht-wc.c uses
"input-current-limit-from-supplier" instead of "extcon-name" the last
user of the bq24190 extcon code is gone, remove it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The driver sets the fuel gauge to continuous monitoring on startup, for
the models that support this. When the board shuts down, the chip remains
in that mode, causing a few mA drain on the battery every 2 or 10 seconds.
This patch registers a shutdown handler that turns off the monitoring to
prevent this battery drain.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
struct timespec should no longer be used because of the y2038
overflow problem. This code does not suffer from the overflow,
but it's trivial to change it to use timespec64 without changing
the interface, so let's do that.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
xHC can generate two events for a short transfer if the short TRB and
last TRB in the TD are not the same TRB.
The driver will handle the TD after the first short event, and remove
it from its internal list. Driver then incorrectly prints a warning
for the second event:
"WARN Event TRB for slot x ep y with no TDs queued"
Fix this by not printing a warning if we get a event on a empty list
if the previous event was a short event.
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The platform_get_irq_byname() function returns -1 if an error occurs.
zero or positive number on success. platform_get_irq_byname() error
checking for zero is not correct.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
If an error occurs when we enable the backup battery charging, we should
go through the error handling path directly.
Before commit db43e6c473 ("ab8500-bm: Add usb power path support") this
was the case, but this commit has added some code between the last test and
the 'out' label.
So, in case of error, this added code is executed and the error may be
silently ignored.
Fix it by adding the missing 'goto out', as done in all other error
handling paths.
Fixes: db43e6c473 ("ab8500-bm: Add usb power path support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
'ret' is know to be 0 at this point, because it has not been updated by the
the previous call to 'abx500_mask_and_set_register_interruptible()'.
Fix it by updating 'ret' before checking if an error occurred.
Fixes: 84edbeeab6 ("ab8500-charger: AB8500 charger driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
It has been many years since the last confirmed sighting (and fix) of an
RC6 related bug (usually a system hang). Remove the parameter to stop
users from setting dangerous values, as they often set it during triage
and end up disabling the entire runtime pm instead (the option is not a
fine scalpel!).
Furthermore, it allows users to set known dangerous values which were
intended for testing and not for production use. For testing, we can
always patch in the required setting without having to expose ourselves
to random abuse.
v2: Fixup NEEDS_WaRsDisableCoarsePowerGating fumble, and document the
lack of ilk support better.
v3: Clear intel_info->rc6p if we don't support rc6 itself.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201113030.18360-1-chris@chris-wilson.co.uk
As we declare the GPU wedged if the reset fails, such a failure is quite
terminal. Before taking that drastic action, let's sleep first and try
active, in the hope that the hardware has quietened down and is then
able to reset. After a few such attempts, it is fair to say that the HW
is truly wedged.
v2: Always print the failure message now, we precheck whether resets are
disabled.
References: https://bugs.freedesktop.org/show_bug.cgi?id=104007
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201122011.16841-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Should be discharging_max_duration_ms, not charging_max_duration_ms.
Signed-off-by: Ryosuke Saito <raitosyo@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
This change resolves a new compile-time warning
when built as a loadable module:
WARNING: modpost: missing MODULE_LICENSE() in drivers/power/reset/zx-reboot.o
see include/linux/module.h for more information
This adds the license as "GPL v2", which matches the header of the file.
MODULE_DESCRIPTION and MODULE_AUTHOR are also added.
Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The original code does this: "1 << (1 << 11)" which is undefined in C.
Fixes: dbc4deda03 ("power: Adds support for Smart Battery System Manager")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Reject interlaced modes on VLV/CHV DP outputs. This simply does
not work correctly in the hardware. We do get some output, but
it's quite corrupted.
The available documentation fails to mention this fact. I
contacted some hardware people who eventually managed to locate
the relevant HSD for VLV, which was resolved by declaring
interlaced DP output as not supported. The HSD was never cloned
for CHV even though it inherited most of the hardware and
thus has the same problems with interlaced DP output.
Cc: Dennis Vshivkov <awesome.walrus+bugzilla@gmail.com>
Reported-by: Dennis Vshivkov <awesome.walrus+bugzilla@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103922
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129180847.30613-1-ville.syrjala@linux.intel.com
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We should make sure the pipe has fully started when we enable it from
the i830 "power well". Otherwise theoretically i830 could also hit
problems with vblank timestamps jumping around (since we skip the
wait during modeset on i830). Additionally moving planes between the
pipes etc. might not work correctly until both pipes are actually up and
running.
v2: Less pointless duplication in the code (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129153732.3612-2-ville.syrjala@linux.intel.com
Previously I was under the impression that the scanline counter
reads 0 when the pipe is off. Turns out that's not correct, and
instead the scanline counter simply stops when the pipe stops, and
it retains it's last value until the pipe starts up again, at which
point the scanline counter jumps to vblank start.
These jumps can cause the timestamp to jump backwards by one frame.
Since we use the timestamps to guesstimage also the frame counter
value on gen2, that would cause the frame counter to also jump
backwards, which leads to a massice difference from the previous value.
The end result is that flips/vblank events don't appear to complete as
they're stuck waiting for the frame counter to catch up to that massive
difference.
Fix the problem properly by actually making sure the scanline counter
has started to move before we assume that it's safe to enable vblank
processing.
v2: Less pointless duplication in the code (Chris)
Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: b7792d8b54 ("drm/i915: Wait for pipe to start before sampling vblank timestamps on gen2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129153732.3612-1-ville.syrjala@linux.intel.com
i830_disable_pipe() gets called from the power well code, and thus
we're already holding the power domain mutex. That means we can't
call plane->get_hw_state() as it will also try to grab the
same mutex and will thus deadlock.
Replace the assert_plane() calls (which calls ->get_hw_state()) with
just raw register reads in i830_disable_pipe(). As a bonus we can
now get a warning if plane C is enabled even though we don't even
expose it as a drm plane.
v2: Do a separate WARN_ON() for each plane (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 51f5a09639 ("drm/i915: Add .get_hw_state() method for planes")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129125411.29055-1-ville.syrjala@linux.intel.com
Transcoder EDP does not support audio. Let's not try to
read the state of the audio enable bit HSW_AUD_PIN_ELD_CP_VLD
based on the pipe when using transcoder EDP.
While at it make the function static and flatten it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129164303.18793-3-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
commit c7cdff0e86 ("virtio_balloon: fix deadlock on OOM")
changed code to increment vb->num_pfns before call to
set_page_pfns(), which used to happen only after.
This patch fixes boot hang for me on ppc64le KVM guests.
Fixes: c7cdff0e86 ("virtio_balloon: fix deadlock on OOM")
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
index can be reused by other virtio device.
Cc: stable@vger.kernel.org
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On driver remove(), all objects created during probe() should be
removed, but sysfs qemu_fw_cfg/rev file was left. Also reorder
functions to match probe() error cleanup code.
Cc: stable@vger.kernel.org
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Two fixes for nasty kexec/kdump crashes in certain configurations.
A couple of minor fixes for the new TIDR code.
A fix for an oops in a CXL error handling path.
Thanks to:
Andrew Donnellan, Christophe Lombard, David Gibson, Mahesh Salgaonkar, Vaibhav Jain.
-----BEGIN PGP SIGNATURE-----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=/LD/
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Two fixes for nasty kexec/kdump crashes in certain configurations.
A couple of minor fixes for the new TIDR code.
A fix for an oops in a CXL error handling path.
Thanks to: Andrew Donnellan, Christophe Lombard, David Gibson, Mahesh
Salgaonkar, Vaibhav Jain"
* tag 'powerpc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Do not assign thread.tidr if already assigned
powerpc: Avoid signed to unsigned conversion in set_thread_tidr()
powerpc/kexec: Fix kexec/kdump in P9 guest kernels
powerpc/powernv: Fix kexec crashes caused by tlbie tracing
cxl: Check if vphb exists before iterating over AFU devices
Error out only if both 'bank-width' and 'gpmc,device-width' are missing.
As 'bank-width' is mostly used for NOR devices and all other devices must
use 'gpmc,device-width' update the error message accordingly.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
-----BEGIN PGP SIGNATURE-----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=1krM
-----END PGP SIGNATURE-----
Merge tag 'afs-fixes-20171201' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
"Two fix patches for the AFS filesystem:
- Fix the refcounting on permit caching.
- AFS inode (afs_vnode) fields need resetting after allocation
because they're only initialised when slab pages are obtained from
the page allocator"
* tag 'afs-fixes-20171201' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Properly reset afs_vnode (inode) fields
afs: Fix permit refcounting
Currently BCLK inverting is only handled when the DAI format is
DSP, but the BCLK may be inverted in any supported mode. Without
this using this CODEC in any other mode than DSP with the BCLK
inverted leads to bad sampling timing and very poor audio quality.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This CODEC supports being the WCLK and/or BCLK slave, add
support for this here.
Also make the alert into an error as alert is more urgent
than needed here and is rarely used.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If our set_sysclk DAI callback has not been called yet p_div will be 0
and dividing by this will cause an error. Print an error message and
leave before this.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Move to using newer gpiod_* GPIO handling functions. This simplifies
the code and eases dropping platform data in the next patch. Also
remember GPIO are active low, so set "1" to reset.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The function aic31xx_device_init() is only called from probe and
does nothing that logically shouldn't be in probe, remove this
unneeded function call and move its code into probe where it was called.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We also move the comments describing the registers to after the register
definition to remove non-uniform vertical white-space, this makes
cross-referencing with the datasheet much easier.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Simple non-functional changes including:
* Fix spelling errors
* Reformat code for easier reading
* Remove unneeded code
* Remove assignments that are always overridden
* Normalize function return paths
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Re-route all opt-clocks to use the new clkctrl clocks also, instead of
depending on the old dt clocks. Also, add aliases for certain clkctrl
clocks that hwmod core depends upon. The alias list can be stripped
down once hwmod database no longer needs these.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Add data for am43xx clkctrl clocks, and register it within the clkctrl
driver.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>