Alexei Starovoitov says:
====================
Small set of verifier improvements and cleanups which is
necessary for bigger patch set of bpf-to-bpf calls coming later.
See individual patches for details.
Tested on x86 and arm64 hw.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
since verifier started to print liveness state of the registers
adjust expected output of test_align.
Now this test checks for both proper alignment handling by verifier
and correctness of liveness marks.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
don't pass large struct bpf_reg_state by value.
Instead pass it by pointer.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
verifier knows how to trim paths that are known not to be
taken at run-time when register containing run-time constant
is compared with another constant.
It was done only for JEQ comparison.
Extend it to include JNE as well.
More cases can be added in the future.
before after
bpf_lb-DLB_L3.o 2270 2051
bpf_lb-DLB_L4.o 3682 3287
bpf_lb-DUNKNOWN.o 1110 1080
bpf_lxc-DDROP_ALL.o 27876 24980
bpf_lxc-DUNKNOWN.o 38780 34308
bpf_netdev.o 16937 15404
bpf_overlay.o 7929 7191
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
registers with pointers filled from stack were missing live_written marks
which caused liveness propagation to unnecessary mark more registers as
live_read and miss state pruning opportunities later on.
before after
bpf_lb-DLB_L3.o 2285 2270
bpf_lb-DLB_L4.o 3723 3682
bpf_lb-DUNKNOWN.o 1110 1110
bpf_lxc-DDROP_ALL.o 27954 27876
bpf_lxc-DUNKNOWN.o 38954 38780
bpf_netdev.o 16943 16937
bpf_overlay.o 7929 7929
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
when verifier hits an internal bug don't mark register R10==FP as uninit,
since it's read only register and it's not technically correct to let
verifier run further, since it may assume that R10 has valid auxiliary state.
While developing subsequent patches this issue was discovered,
though the code eventually changed that aux reg state doesn't have
pointers any more it is still safer to avoid clearing readonly register.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
let verifier print register and stack liveness information
into verifier log
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
fix incorrect stack state prints in print_verifier_state()
Fixes: 638f5b90d4 ("bpf: reduce verifier memory consumption")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The flexcan IP cores used on MX25 and MX35 do not generate Error Passive
IRQs. Update the IP core overview table in the driver accordingly.
Suggested-by: ZHU Yi (ST-FIR/ENG1-Zhu) <Yi.Zhu5@cn.bosch.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
PCI/PCIe drivers for PEAK-System CAN/CAN-FD interfaces do some access to the
PCI config during probing. In case one of these accesses fails, a POSITIVE
PCIBIOS_xxx error code is returned back. This POSITIVE error code MUST be
converted into a NEGATIVE errno for the probe() function to indicate it
failed. Using the pcibios_err_to_errno() function, we make sure that the
return code will always be negative.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
After commit d75b1ade56 ("net: less interrupt masking in NAPI") napi
repoll is done only when work_done == budget.
So we need to return budget if there are still packets to receive.
Signed-off-by: Oliver Stäbler <oliver.staebler@bytesatwork.ch>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Avoid flooding the kernel log with "Formate error", if incomplete message
are received.
Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The conditon in the while-loop becomes true when actual_length is less than
2 (MSG_HEADER_LEN). In best case we end up with a former, already
dispatched msg, that got msg->len greater than actual_length. This will
result in a "Format error" error printout.
Problem seen when unplugging a Kvaser USB device connected to a vbox guest.
warning: comparison between signed and unsigned integer expressions
[-Wsign-compare]
Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The allocated buffer was not freed if usb_submit_urb() failed.
Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When capturing the bo, we allocate an error object with an array of
min(vma->size, vma->node.size) pages, plus a bit for compression overhead.
However, when creating the fake vma to describe the bo, only one of the
sizes was filled in, resulting in a too small array. Through my and CI
testing, this was sufficient for the mostly empty NULL context as
it compressed well (or the out-of-bounds access simply didn't cause an
issue). However, in real workloads on Cannonlake, we were overflowing
that array and causing havoc with the random memory corruption.
Reported-by: Rafael Antognolli <rafael.antognolli@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103964
Fixes: 4e90a6e222 ("drm/i915: Record default HW state in the GPU error state")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201001536.13941-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
The current hid-multitouch driver only allow the report of two
orientations, vertical and horizontal. We use the Azimuth orientation
usage 0x3F under the Digitizer usage page to report orientation if the
device supports it.
Changelog:
v1 -> v2:
- Fix commit message.
- Remove resolution reporting for ABS_MT_ORIENTATION.
v2 -> v3:
- Fix commit message.
v3 -> v4:
- Fix ABS_MT_ORIENTATION ABS param range.
- Don't set ABS_MT_ORIENTATION in ABS_DG_HEIGHT when it is already
set by ABS_DG_AZIMUTH.
v4 -> v5:
- Improve multi-touch-protocol.rst documentation.
Signed-off-by: Wei-Ning Huang <wnhuang@chromium.org>
Signed-off-by: Wei-Ning Huang <wnhuang@google.com>
Reviewed-by: Dmitry Torokhov <dtor@chromium.org>
Reviewed-by: Henrik Rydberg <rydberg@bitmath.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The T100TAF and T100HA keyboard docks have the same special keys and
custom protocol multitouch touchpad as the T100TA, but use a different
product id.
The T100TAF and T100HA both use the same product id, but the T100HA's
touchpad has a different coordinate range.
This commits adds supports for the new USB id and uses a dmi-check to
determine if we're dealing with the T100TAF or T100HA.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197849
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The pointer returned by of_device_get_match_data() doesn't have the same
size as u32 on 64-bit architectures, causing a compile warning when
compile-testing the driver on such platform.
Cast the return value of of_device_get_match_data() to unsigned long and
then to u32 to silence this warning.
Fixes: 7f866986e7 ("leds: add PM8058 LEDs driver")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Avoid using specific defined values for checking returned status of the
->erase() hook. Instead, use usual negative error values on failure,
zero otherwise.
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
If you compile with:
CONFIG_HID_HOLTEK=m
CONFIG_HOLTEK_FF is not set
You get the following warning:
WARNING: modpost: missing MODULE_LICENSE() in drivers/hid/hid-holtekff.o
see include/linux/module.h for more information
Fix this by moving the module info out of the #ifdef CONFIG_HOLTEK_FF
block and into the un-guarded part of the file.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Anssi Hannula <anssi.hannula@iki.fi>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The flexcan driver has been modified to check for big-endian dts
property for be read/write to flexcan registers/mb.
An exception to this rule is powerpc P1010RDB, which is always
big-endian, even if big-endian is not present in dts. This is
checked using p1010-flexcan compatible in dts.
Therefore, remove p1010-flexcan compatible from imx series dts,
as their flexcan core is little endian.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The flexcan driver assumed that flexcan controller is big endian for
powerpc architecture and little endian for other architectures.
But this is not universally true. flexcan controller can be little or
big endian on any architecture.
Therefore the flexcan driver has been modified to check for "big-endian"
device tree property for controllers that are big endian.
consequently add the property to freescale P1010 SOC device tree.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Poonam Aggrwal <poonam.aggrwal@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The FlexCAN controller can be modelled as little or big endian depending
on SOC design. This device tree property identifies the controller
endianness and the driver reads/writes controller registers based on
that.
This is optional property. i.e. if this property is not present in
device tree node then controller is assumed to be little endian. if this
property is present then controller is assumed to be big endian.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Poonam Aggrwal <poonam.aggrwal@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds platform specific details for NXP SOC LS1021A to the
flexcan driver code.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
Reviewed-by: Poonam Aggrwal <poonam.aggrwal@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The FlexCAN driver assumed that FlexCAN controller is big endian for
powerpc architecture and little endian for other architectures.
But this may not be the case. FlexCAN controller can be little or big
endian on any architecture. For e.g. NXP LS1021A ARM based SOC has big
endian FlexCAN controller.
Therefore, the driver has been modified to add a provision for both
types of controllers using an additional device tree property. On a
"fsl,p1010-flexcan" device BE is default, on all other devices LE is.
Big Endian controllers should have "big-endian" set in the device tree.
check "Documentation/devicetree/bindings/net/can/fsl-flexcan.txt" for
usage.
This is the standard practice followed in linux. for more info check:
Documentation/devicetree/bindings/common-properties.txt
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Sakar Arora <Sakar.Arora@freescale.com>
Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
Reviewed-by: Poonam Aggrwal <poonam.aggrwal@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Make c_can_pci_data structures const as they are only used during
a copy operation.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This changes the calculation of the timestamps to use ktime_t
instead of struct timeval as the base. This gets rid of one
of the few remaining users of the deprecated ktime_to_timeval()
and timeval_to_ktime() helpers.
The code should also get more efficient, as we have now removed
all of the divisions.
I have left the cut-off for resetting the counters as 4.200
seconds, in order to leave the behavior unchanged otherwise.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
We want to remove 'struct timeval' and related interfaces since this is
generally not safe for use beyond 2038.
For peak_usb, we can simplify the internal interface by using ktime_t
directly. This should not change any behavior, but it avoids a few
conversions.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
kvm_vgic_vcpu_destroy already gets called from kvm_vgic_destroy for
each vcpu, so we don't have to call it from kvm_arch_vcpu_free.
Additionally the other architectures set kvm->online_vcpus to zero
after freeing them. We might as well do that for ARM too.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
vgic_set_owner acquires the irq lock without disabling interrupts,
resulting in a lockdep splat (an interrupt could fire and result
in the same lock being taken if the same virtual irq is to be
injected).
In practice, it is almost impossible to trigger this bug, but
better safe than sorry. Convert the lock acquisition to a
spin_lock_irqsave() and keep lockdep happy.
Reported-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
When we do tunnel or beet mode, we pass saddr and daddr from the
template to xfrm_state_find(), this is ok. On transport mode,
we pass the addresses from the flowi, assuming that the IP
addresses (and address family) don't change during transformation.
This assumption is wrong in the IPv4 mapped IPv6 case, packet
is IPv4 and template is IPv6.
Fix this by catching address family missmatches of the policy
and the flow already before we do the lookup.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Code path when (encap_type < 0) does not verify the state is valid
before progressing.
This will result in a crash if, for instance, x->km.state ==
XFRM_STATE_ACQ.
Fixes: 7785bba299 ("esp: Add a software GRO codepath")
Signed-off-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
x is already initialized to the same value, above.
Signed-off-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
xfrm_dev_state_add function returns success for unsupported HW SA options.
Resulting the calling function to create SW SA without corrlating HW SA.
Desipte IPSec device offloading option was chosen.
These not supported HW SA options are hard coded within xfrm_dev_state_add
function.
SW backward compatibility will break if we add any of these option as old
HW will fail with new SW.
This patch changes the behaviour to return -EINVAL in case unsupported
option is chosen.
Notifying user application regarding failure and not breaking backward
compatibility for newly added HW SA options.
Signed-off-by: Yossef Efraim <yossefe@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In case of wrap around, replay_esn->oseq_hi is not updated
before it is tested for it's actual value, leading function
to fail with overflow indication and packets being dropped.
This patch updates replay_esn->oseq_hi in the right place.
Fixes: d7dbefc45c ("xfrm: Add xfrm_replay_overflow functions for offloading")
Signed-off-by: Yossef Efraim <yossefe@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This seems to be an obvious typo, NLA_U32 is type of the attribute, not its
(minimal) length.
Fixes: 077fbac405 ("net: xfrm: support setting an output mark.")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
load_bpf_file() should fail if ioctl with command
PERF_EVENT_IOC_ENABLE and PERF_EVENT_IOC_SET_BPF fails.
When they do fail, proper error messages are printed.
With this change, the below "syscall_tp" run shows that
the maximum number of bpf progs attaching to the same
perf tracepoint is indeed enforced.
$ ./syscall_tp -i 64
prog #0: map ids 4 5
...
prog #63: map ids 382 383
$ ./syscall_tp -i 65
prog #0: map ids 4 5
...
prog #64: map ids 388 389
ioctl PERF_EVENT_IOC_SET_BPF failed err Argument list too long
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
cgropu+bpf prog array has a maximum number of 64 programs.
Let us apply the same limit here.
Fixes: e87c6bc385 ("bpf: permit multiple bpf attachments for a single perf event")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
- Fix an ACPI EC driver regression (from the 4.9 cycle) causing
the driver's power management operations to be omitted during
system suspend/resume on platforms where the EC instance from the
ECDT table is used instead of the one from the DSDT (Lv Zheng).
- Prevent modalias from being exposed to user space for ACPI device
objects with _STA returning 0 (not present and not functional) to
prevent driver modules from being loaded automatically for
hardware that is not actually present on some platforms (Hans
de Goede).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=dmeF
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a regression related to the ACPI EC handling during system
suspend/resume on some platforms and prevent modalias from being
exposed to user space for ACPI device object with "not functional and
not present" status.
Specifics:
- Fix an ACPI EC driver regression (from the 4.9 cycle) causing the
driver's power management operations to be omitted during system
suspend/resume on platforms where the EC instance from the ECDT
table is used instead of the one from the DSDT (Lv Zheng).
- Prevent modalias from being exposed to user space for ACPI device
objects with _STA returning 0 (not present and not functional) to
prevent driver modules from being loaded automatically for hardware
that is not actually present on some platforms (Hans de Goede)"
* tag 'acpi-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / EC: Fix regression related to PM ops support in ECDT device
ACPI / bus: Leave modalias empty for devices which are not present
The code used to do that and then I mucked with it and never quite put
the code back. Today the code references current_cred()->uid and
current_cred()->gid which is equivalent but more wordy, and not
idiomatic.
Fixes: 93faccbbfa ("fs: Better permission checking for submounts")
Fixes: 069d5ac9ae ("autofs: Fix automounts by using current_real_cred()->uid")
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
When vfs_submount was added the test to limit automounts from
filesystems that with s_user_ns != &init_user_ns accidentially left
in follow_automount. The test was never about any security concerns
and was always about how do we implement this for filesystems whose
s_user_ns != &init_user_ns.
At the moment this check makes no difference as there are no
filesystems that both set FS_USERNS_MOUNT and implement d_automount.
Remove this check now while I am thinking about it so there will not
be odd booby traps for someone who does want to make this combination
work.
vfs_submount still needs improvements to allow this combination to work,
and vfs_submount contains a check that presents a warning.
The autofs4 filesystem could be modified to set FS_USERNS_MOUNT and it would
need not work on this code path, as userspace performs the mounts.
Fixes: 93faccbbfa ("fs: Better permission checking for submounts")
Fixes: aeaa4a79ff ("fs: Call d_automount with the filesystems creds")
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
These add missing module information to the Mediatek cpufreq driver
module (Jesse Chan), fix config dependencies for the Loongson cpufreq
driver (James Hogan) and fix two issues related to CPU offline in
the cpupower utility (Abhishek Goel).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=ZzZK
-----END PGP SIGNATURE-----
Merge tag 'pm-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
- add missing module information to the Mediatek cpufreq driver module
(Jesse Chan)
- fix config dependencies for the Loongson cpufreq driver (James Hogan)
- fix two issues related to CPU offline in the cpupower utility
(Abhishek Goel).
* tag 'pm-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: mediatek: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
cpufreq: Add Loongson machine dependencies
cpupower : Fix cpupower working when cpu0 is offline
cpupowerutils: bench - Fix cpu online check
I've noticed the following message while booting a S905X based board:
soc soc0: Amlogic Meson GXL (S905D) Revision 21:82 (b:2) Detected
The S905D string is obviously wrong. The vendor code does:
...
ver = (readl(assist_hw_rev) >> 8) & 0xff;
meson_cpu_version[MESON_CPU_VERSION_LVL_MINOR] = ver;
ver = (readl(assist_hw_rev) >> 16) & 0xff;
meson_cpu_version[MESON_CPU_VERSION_LVL_PACK] = ver;
...
while the current code does:
...
...
This means that the current mainline code has package id and minor
version reversed.
Fixes: a9daaba296 ("soc: Add Amlogic SoC Information driver")
Signed-off-by: Arnaud Patard <apatard@hupstream.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Trivial fix to spelling mistake in pr_err error message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
commit 200a575b68 ("ARM: dts: meson: organize devices in their corresponding busses")
organized all peripherals in busses so that the base register offset of
the bus doesn't have to be included in all child-nodes anymore.
The GPIO interrupt controller however specifies the register offset
without subtracting the "cbus" base address. This leads to a problem
where of_iomap inside the irq-meson-gpio driver fails because it
actually tries to map 0x182209880 (cbus base = 0xc1100000 + 0xc1109880
for the GPIO interrupt controller). Fix this by using 0x9880 as register
offset.
Fixes: 7d32bc03bc ("ARM: dts: meson8b: enable gpio interrupt controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Nodes are sorted by their register start address. Move gpio_intc to the
correct position.
No functional changes intended.
Fixes: 7d32bc03bc ("ARM: dts: meson8b: enable gpio interrupt controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>