Commit graph

932,869 commits

Author SHA1 Message Date
Gustavo A. R. Silva
282ef47291 rxrpc: Fix variable overwrite
Values assigned to both variable resend_at and ack_at are overwritten
before they can be used.

The correct fix here is to add 'now' to the previously computed value in
resend_at and ack_at.

Addresses-Coverity-ID: 1462262
Addresses-Coverity-ID: 1462263
Addresses-Coverity-ID: 1462264
Fixes: beb8e5e4f3 ("rxrpc: Express protocol timeouts in terms of RTT")
Link: https://marc.info/?i=17004.1511808959%40warthog.procyon.org.uk
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-29 14:44:22 +00:00
Geert Uytterhoeven
15bfe05c8d net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit
On 64-bit (e.g. powerpc64/allmodconfig):

    drivers/net/ethernet/xilinx/ll_temac_main.c: In function 'temac_start_xmit_done':
    drivers/net/ethernet/xilinx/ll_temac_main.c:633:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
	dev_kfree_skb_irq((struct sk_buff *)cur_p->app4);
			  ^

cdmac_bd.app4 is u32, so it is too small to hold a kernel pointer.

Note that several other fields in struct cdmac_bd are also too small to
hold physical addresses on 64-bit platforms.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-29 09:43:24 -05:00
David Howells
5fc62f6a13 rxrpc: Fix ACK generation from the connection event processor
Repeat terminal ACKs and now terminal ACKs are now generated from the
connection event processor rather from call handling as this allows us to
discard client call structures as soon as possible and free up the channel
for a follow on call.

However, in ACKs so generated, the additional information trailer is
malformed because the padding that's meant to be in the middle isn't
included in what's transmitted.

Fix it so that the 3 bytes of padding are included in the transmission.

Further, the trailer is misaligned because of the padding, so assigment to
the u16 and u32 fields inside it might cause problems on some arches, so
fix this by breaking the padding and the trailer out of the packed struct.

(This also deals with potential compiler weirdies where some of the nested
structs are packed and some aren't).

The symptoms can be seen in wireshark as terminal DUPLICATE or IDLE ACK
packets in which the Max MTU, Interface MTU and rwind fields have weird
values and the Max Packets field is apparently missing.

Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-29 14:40:41 +00:00
David Howells
3d7682af22 rxrpc: Clean up whitespace
Clean up some whitespace from rxrpc.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-29 14:40:41 +00:00
Maarten Lankhorst
52dd06506e drm/fb_helper: Disable all crtc's when initial setup fails.
Some drivers like i915 start with crtc's enabled, but with deferred
fbcon setup they were no longer disabled as part of fbdev setup.
Headless units could no longer enter pc3 state because the crtc was
still enabled.

Fix this by calling restore_fbdev_mode when we would have called
it otherwise once during initial fbdev setup.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: ca91a2758f ("drm/fb-helper: Support deferred setup")
Cc: <stable@vger.kernel.org> # v4.14+
Reported-by: Thomas Voegtle <tv@lio96.de>
Tested-by: Thomas Voegtle <tv@lio96.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171128111603.62757-1-maarten.lankhorst@linux.intel.com
2017-11-29 15:37:31 +01:00
Hyong-Youb Kim
01e4fab6c1 myri10ge: Update MAINTAINERS
Change the maintainer to Chris Lee who has access to Myricom hardware
and can test/review. Update the website URL.

Signed-off-by: Hyong-Youb Kim <hykim@myri.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-29 09:27:35 -05:00
Mark Yao
b415b79529 MAINTAINERS: change maintainer for Rockchip drm drivers
For personal reasons, Mark Yao will leave rockchip,
can not continue maintain drm/rockchip, Sandy Huang
and Heiko Stübner will take over drm/rockchip.

Cc: Sandy Huang <hjc@rock-chips.com>
Cc: Heiko Stübner <heiko@sntech.de>

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
[seanpaul added Heiko]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129142459.32351-1-seanpaul@chromium.org
2017-11-29 09:26:16 -05:00
Bartosz Golaszewski
5478e478ee eeprom: at24: correctly set the size for at24mac402
There's an ilog2() expansion in AT24_DEVICE_MAGIC() which rounds down
the actual size of EUI-48 byte array in at24mac402 eeproms to 4 from 6,
making it impossible to read it all.

Fix it by manually adjusting the value in probe().

This patch contains a temporary fix that is suitable for stable
branches. Eventually we'll probably remove the call to ilog2() while
converting the magic values to actual structs.

Cc: stable@vger.kernel.org
Fixes: 0b813658c1 ("eeprom: at24: add support for at24mac series")
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2017-11-29 15:22:24 +01:00
Gustavo A. R. Silva
62a277d43d dmaengine: at_hdmac: fix potential NULL pointer dereference in atc_prep_dma_interleaved
_xt_ is being dereferenced before it is null checked, hence there is a
potential null pointer dereference.

Fix this by moving the pointer dereference after _xt_ has been null
checked.

This issue was detected with the help of Coccinelle.

Fixes: 4483320e24 ("dmaengine: Use Pointer xt after NULL check.")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-11-29 19:48:17 +05:30
Christophe JAILLET
5c9afbda91 dmaengine: ioat: Fix error handling path
If the last test in 'ioat_dma_self_test()' fails, we must release all
the allocated resources and not just part of them.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-11-29 19:47:46 +05:30
Lucas Stach
a76dfe350c drm/atomic: make drm_atomic_helper_wait_for_vblanks more agressive
drm_atomic_helper_setup_commit expects that flipping of previous commits
has happened when it is called to set up a new commit. This can be violated
by commits where userspace doesn't get a flip completion event to
synchronize against i.e. legacy modesets and property changes.

The expectation is that those are done by blocking commits, which wait for
completion. Most drivers call drm_atomic_helper_wait_for_vblanks in the
commit_tail to ensure completion, but the wait for next vblank might not
actually happen if the commit didn't change any planes.

Make the wait more agressive by also waiting if no planes changed. This
is the minimal regression fix for the 4.15 kernel series. Long term
drivers should switch away from drm_atomic_helper_wait_for_vblanks and
use drm_atomic_helper_wait_for_flip_done instead.

Fixes: de39bec1a0 ("drm/atomic: Remove waits in drm_atomic_helper_commit_cleanup_done, v2.")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129110431.6300-1-l.stach@pengutronix.de
2017-11-29 15:16:17 +01:00
Kuninori Morimoto
73a47bd0da dmaengine: rcar-dmac: use TCRB instead of TCR for residue
SYS/RT/Audio DMAC includes independent data buffers for reading
and writing. Therefore, the read transfer counter and write transfer
counter have different values.
TCR indicates read counter, and TCRB indicates write counter.
The relationship is like below.

	        TCR       TCRB
	[SOURCE] -> [DMAC] -> [SINK]

In the MEM_TO_DEV direction, what really matters is how much data has
been written to the device. If the DMA is interrupted between read and
write, then, the data doesn't end up in the destination, so shouldn't
be counted. TCRB is thus the register we should use in this cases.

In the DEV_TO_MEM direction, the situation is more complex. Both the
read and write side are important. What matters from a data consumer
point of view is how much data has been written to memory.
On the other hand, if the transfer is interrupted between read and
write, we'll end up losing data. It can also be important to report.

In the MEM_TO_MEM direction, what matters is of course how much data
has been written to memory from data consumer point of view.
Here, because read and write have independent data buffers, it will
take a while for TCR and TCRB to become equal. Thus we should check
TCRB in this case, too.

Thus, all cases we should check TCRB instead of TCR.

Without this patch, Sound Capture has noise after PulseAudio support
(= 07b7acb51d ("ASoC: rsnd: update pointer more accurate")), because
the recorder will use wrong residue counter which indicates transferred
from sound device, but in reality the data was not yet put to memory
and recorder will record it.

However, because DMAC is buffering data until it can be transferable
size, TCRB might not be updated.
For example, if consumer doesn't know how much data can be received,
it requests enough size to DMAC. But in reality, it might receive very
few data. In such case, DMAC just buffered it until transferable size,
and no TCRB updated.

In such case, this buffered data will be transferred if CHCR::DE bit was
cleared, and this is happen if rcar_dmac_chan_halt(). In other word, it
happen when consumer called dmaengine_terminate_all().

Because of this behavior, it need to flush buffered data when it returns
"residue" (= dmaengine_tx_status()).
Otherwise, consumer might calculate wrong things if it called
dmaengine_tx_status() and dmaengine_terminate_all() consecutively.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Tested-by: Ryo Kodama <ryo.kodama.vz@renesas.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-11-29 19:42:57 +05:30
Kuninori Morimoto
a8d46a7f5d dmaengine: rcar-dmac: ensure CHCR DE bit is actually 0 after clearing
DMAC reads data from source device, and buffered it until transferable
size for sink device. Because of this behavior, DMAC is including
buffered data .

Now, CHCR DE bit is controlling DMA transfer enable/disable.

If DE bit was cleared during data transferring, or during buffering,
it will flush buffered data if source device was peripheral device
(The buffered data will be removed if source device was memory).
Because of this behavior, driver should ensure that DE bit is actually
0 after clearing.

This patch adds new rcar_dmac_chcr_de_barrier() and call it after CHCR
register access.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Tested-by: Ryo Kodama <ryo.kodama.vz@renesas.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-11-29 19:42:57 +05:30
Dmitry Osipenko
f6160f3598 dmaengine: tegra-apb: Support non-flow controlled slave configuration
This allows DMA client to issue a non-flow controlled TX. In particular
it is needed for the fuse driver that reads fuse registers using APBDMA
to workaround a HW bug that results in hang when CPU and DMA perform
simultaneous access to fuse peripheral.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-11-29 19:35:05 +05:30
Masahiro Yamada
0308cadcec MAINTAINERS: exclude other Socionext SoC DT files from ARM/UNIPHIER entry
There are several product lines in Socionext.  I maintain only
DT files prefixed with "uniphier".

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
2017-11-29 22:22:10 +09:00
Masahiro Yamada
897281bac4 arm64: dts: uniphier: remove unnecessary interrupt-parent
These were added to make the ARM64 branch self-contained because
updates for ARM and ARM64 are supposed to be sent as separate
pull requests.

Now, they were merged together in Linus' tree and interrupt-parent
from the arch/arm/boot/dts/uniphier-support-card.dtsi is visible from
ARM64 DT files by the cross-arch reference.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29 22:21:08 +09:00
Dai Okamura
6af9bd4531 arm64: dts: uniphier: correct on-board device IRQ number for PXs3
Commit ba5b5034bd ("arm64: dts: uniphier: route on-board device IRQ
to GPIO controller for PXs3") has incorrect update.

Fixes: ba5b5034bd ("arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3")
Signed-off-by: Dai Okamura <okamura.dai@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29 22:15:47 +09:00
Ville Syrjälä
bcbec31ce5 drm/vblank: Fix vblank timestamp debugs
We're currently calling ktime_to_timespec64() on stack garbage
hence the debug output for vblank timestamps also contains garbage.
Let's assing something to the ktime_t first before we go converting
it to a timespec.

While at it micro-optimize the ktime_to_timespec64() calls away
when vblank debugging isn't enabled.

Fixes: 67680d3c04 ("drm: vblank: use ktime_t instead of timeval")
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Keith Packard <keithp@keithp.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113150210.11311-1-ville.syrjala@linux.intel.com
Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-11-29 15:10:53 +02:00
Gregory CLEMENT
6702abb3bf pinctrl: armada-37xx: Fix direction_output() callback behavior
The direction_output callback of the gpio_chip structure is supposed to
set the output direction but also to set the value of the gpio. For the
armada-37xx driver this callback acted as the gpio_set_direction callback
for the pinctrl.

This patch fixes the behavior of the direction_output callback by also
applying the value received as parameter.

Cc: stable@vger.kernel.org
Fixes: 5715092a45 ("pinctrl: armada-37xx: Add gpio support")
Reported-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-29 14:09:23 +01:00
Markus Elfring
7f6f50dfb5 pinctrl: mcp23s08: Improve unlocking of a mutex in mcp23s08_irq()
* Add a jump target so that a call of the function "mutex_unlock" is stored
  only twice in this function implementation.

* Replace five calls by goto statements.

* Adjust five condition checks.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-29 13:51:10 +01:00
Mika Westerberg
cb5fda413e pinctrl: cannonlake: Align GPIO number space with Windows
The Cannon Lake Windows GPIO driver always exposes 32 pins per "bank"
regardless of whether the hardware actually has that many pins in a pad
group. This means that there are gaps in the GPIO number space even if
such gaps do not exist in the real hardware. To make things worse the
BIOS is also using the same scheme, so for example on Cannon Lake-LP
vGPIO 39 (vSD3_CD_B) the ACPI GpioInt resource has number 231 instead of
the expected 180 (which would be the hardware number).

To make SD card detection and other GPIOs working properly in Linux we
align the pinctrl-cannonlake GPIO numbering to follow the Windows GPIO
driver numbering taking advantage of the gpio_base field introduced in
the previous patch.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-29 13:46:28 +01:00
Mika Westerberg
a60eac3239 pinctrl: intel: Allow custom GPIO base for pad groups
Currently we always have direct mapping between GPIO numbers and the
hardware pin numbers. However, there are cases where that's not the case
anymore (more about this in the next patch). Instead we need to be able
to specify custom GPIO base for certain pad groups.

To support this, add a new field (gpio_base) to the pad group structure
and update the core Intel pinctrl driver to handle this accordingly.
Passing 0 as gpio_base will use direct mapping so the existing drivers
do not need to be modified. Passing -1 excludes the whole pad group from
having GPIO mapping.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-29 13:44:52 +01:00
Mika Westerberg
03c4749dd6 gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation
We added acpi_gpiochip_pin_to_gpio_offset() because there was a need to
translate from ACPI GpioIo/GpioInt number to Linux GPIO number in the
Cherryview pinctrl driver. This translation is necessary because
Cherryview has gaps in the pin list and the driver used continuous GPIO
number space in Linux side as follows:

  created GPIO range 0->7 ==> INT33FF:03 PIN 0->7
  created GPIO range 8->19 ==> INT33FF:03 PIN 15->26
  created GPIO range 20->25 ==> INT33FF:03 PIN 30->35
  created GPIO range 26->33 ==> INT33FF:03 PIN 45->52
  created GPIO range 34->43 ==> INT33FF:03 PIN 60->69
  created GPIO range 44->54 ==> INT33FF:03 PIN 75->85

For example when ACPI GpioInt resource refers to GPIO 81 (SDMMC3_CD_B)
we translate from pin 81 to the corresponding Linux GPIO number, which
is 50. This number is then used when the GPIO is accessed through gpiolib.

It turns out, this is not necessary at all. We can just pass 1:1 mapping
between Linux GPIO numbers and pin numbers (including gaps) and the
pinctrl core handles all the details automatically:

  created GPIO range 0->7 ==> INT33FF:03 PIN 0->7
  created GPIO range 15->26 ==> INT33FF:03 PIN 15->26
  created GPIO range 30->35 ==> INT33FF:03 PIN 30->35
  created GPIO range 45->52 ==> INT33FF:03 PIN 45->52
  created GPIO range 60->69 ==> INT33FF:03 PIN 60->69
  created GPIO range 75->85 ==> INT33FF:03 PIN 75->85

Here GPIO 81 is exactly same than the hardware pin 81 (SDMMC3_CD_B).

As an added bonus this simplifies both the ACPI GPIO core code and the
Cherryview pinctrl driver.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-29 13:41:46 +01:00
Maciej S. Szmigiero
10582635dc
ASoC: fsl_ssi: add 20-bit sample format for AC'97 and use it for capture
When testing AC'97 capture on UDOO board (currently the only user of
fsl_ssi driver in the AC'97 mode) it become obvious that there is a massive
distortion above certain, small input signal.

This problem has been traced to silicon errata ERR003778:
"In AC97, 16-bit mode, received data is shifted by 4-bit locations" that
has "No fix scheduled".
This errata suggests a workaround of doing a 4-bit shift back in SDMA
script for this specific operation mode, however our SDMA scripts are
shared between various SoC peripherals so we can't really modify them.

There is a simple way to avoid this problem, however, that is to disallow
recording in 16-bit mode and only support it in AC'97-native 20-bit mode.
We have to use a 4-byte format for this since SSI FIFOs do not allow 3-byte
accesses (and these aren't supported by imx-sdma driver anyway).
With this change the capture distortion is gone.

We can also add this format as an additional one supported for playback,
using this opportunity to make sure that we use CPU-endian-native formats
in AC'97 mode as we already do in I2S mode.

There is no problem in using different bit widths in playback and capture
in AC'97 mode so allow this, too.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-29 12:30:47 +00:00
Mark Brown
573994e4ea
Merge branch 'topic/pcm-20bit' of https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-fsl-ssi 2017-11-29 12:30:24 +00:00
Tvrtko Ursulin
cf669b4e9f drm/i915: Consolidate checks for engine stats availability
Sagar noticed the check can be consolidated between the engine stats
implementation and the PMU.

My first choice was a static inline helper but that got into include
ordering mess quickly fast so I went with a macro instead. At some point
we should perhaps looking into taking out the non-ringubffer bits from
intel_ringbuffer.h into a new intel_engine.h or something.

v2: Use engine->flags. (Chris Wilson)
v3: Rebase and mark GuC as not yet supported. (Chris Wilson)
v4: Move flag setting to intel_engines_reset_default_submission.
    (Chris Wilson)
v5: Move flag setting to logical_ring_setup.
v6: intel_engines_reset_default_submission is the wrong place to set the
    flag - it needs to be in execlists_set_default_submission. (Sagar)
v7: Flag setting in logical_ring_setup is not required. (Chris)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> (v6)
Link: https://patchwork.freedesktop.org/patch/msgid/20171129102805.22690-1-tvrtko.ursulin@linux.intel.com
2017-11-29 12:29:40 +00:00
Tvrtko Ursulin
439e2ee4ca drm/i915: Move engine->needs_cmd_parser to engine->flags
Will be adding a new per-engine flags shortly so it makes sense
to consolidate.

v2: Keep the original code flow in intel_engine_cleanup_cmd_parser.
    (Joonas Lahtinen)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129082409.18189-1-tvrtko.ursulin@linux.intel.com
2017-11-29 12:29:39 +00:00
Andy Shevchenko
e1c73a9906 gpio: max732x: Remove duplicate NULL check
Since i2c_unregister_device() became NULL-aware we may remove duplicate
NULL check.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-29 13:25:23 +01:00
Russell King
be2bedb08f ARM: sa1111: map interrupt numbers through irqdomain
Map the interrupt numbers for SA1111 through the SA1111 IRQ domain
rather than doing our own translation.  This allows us to eliminate
the irq_base sachip member.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-11-29 10:57:41 +00:00
Russell King
4c9f6d31dd ARM: sa1111: use an irqdomain for SA1111 interrupts
Use an IRQ domain for SA1111 interrupts, which allows us to separate the
hardware interrupt number from the Linux interrupt number.  We can then
use the hardware interrupt number stored in the irq_data to calculate
the register offsets and mask.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-11-29 10:57:41 +00:00
Russell King
4977e6acc5 ARM: sa1111: remove some redundant definitions
SA1111_VBASE, SA1111_p2v, SA1111_v2p, _SA1111, SA1111_ADDR_WIDTH,
SA1111_ADDR_MASK, and SA1111_DMA_ADDR are not used anywhere in the
kernel, so remove these redundant definitions.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-11-29 10:57:41 +00:00
Russell King
a5b549eda2 ARM: sa1111: remove special sa1111 mmio accessors
Remove the special sa1111 mmio accessors from core sa1111 code, and
their definition in sa1111.h now that all users are gone.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-11-29 10:57:41 +00:00
Russell King
50419497b5 ARM: sa1111: remove legacy suspend/resume methods
The legacy device-driver suspend/resume methods are not used by any of
our drivers, so let's remove this redundant code.

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-11-29 10:57:34 +00:00
Kuninori Morimoto
494665a0f9
ASoC: soc-utils: add const to dummy_codec
Let's align dummy_platform and dummy_codec

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-29 10:48:45 +00:00
Magnus Damm
206f477ec5 ARM: dts: sh73a0: Remove CMT renesas,channels-mask
Update the DTS to remove the now deprecated "renesas,channels-mask"
property.

The channel information is now kept in the device driver and can easily
be determined based on the compat string.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-29 11:46:14 +01:00
Magnus Damm
bc28e52b4d ARM: dts: r8a7794: Remove CMT renesas,channels-mask
Update the DTS to remove the now deprecated "renesas,channels-mask"
property.

The channel information is now kept in the device driver and can easily
be determined based on the compat string.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-29 11:45:53 +01:00
Magnus Damm
5fdbea7147 ARM: dts: r8a7793: Remove CMT renesas,channels-mask
Update the DTS to remove the now deprecated "renesas,channels-mask"
property.

The channel information is now kept in the device driver and can easily
be determined based on the compat string.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-29 11:45:42 +01:00
Magnus Damm
d3fb905378 ARM: dts: r8a7791: Remove CMT renesas,channels-mask
Update the DTS to remove the now deprecated "renesas,channels-mask"
property.

The channel information is now kept in the device driver and can easily
be determined based on the compat string.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-29 11:45:30 +01:00
Magnus Damm
b5c3dacdd9 ARM: dts: r8a7790: Remove CMT renesas,channels-mask
Update the DTS to remove the now deprecated "renesas,channels-mask"
property.

The channel information is now kept in the device driver and can easily
be determined based on the compat string.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-29 11:45:20 +01:00
Magnus Damm
33a616cc7c ARM: dts: r8a7740: Remove CMT renesas,channels-mask
Update the DTS to remove the now deprecated "renesas,channels-mask"
property.

The channel information is now kept in the device driver and can easily
be determined based on the compat string.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-29 11:45:05 +01:00
Magnus Damm
287883993e ARM: dts: r8a73a4: Remove CMT renesas,channels-mask
Update the DTS to remove the now deprecated "renesas,channels-mask"
property.

The channel information is now kept in the device driver and can easily
be determined based on the compat string.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-29 11:42:55 +01:00
Magnus Damm
98b6b8b493 ARM: dts: r8a7794: Update CMT compat strings
Use recently updated R-Car Gen2 CMT0 and CMT1 compat strings.

With this change in place we can keep device-specific configuration in
the driver and the driver can be able to support CMT1 specific features.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-29 11:42:35 +01:00
Magnus Damm
3a4c5d6a8c ARM: dts: r8a7793: Update CMT compat strings
Use recently updated R-Car Gen2 CMT0 and CMT1 compat strings.

With this change in place we can keep device-specific configuration in
the driver and the driver can be able to support CMT1 specific features.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-29 11:42:10 +01:00
Baolin Wang
a1a68fcaf1
regmap: Remove the redundant config to select hwspinlock
The hwspinlock was changed to a bool by commit d048236dfd
("hwspinlock: Change hwspinlock to a bool"), so we do not need
the REGMAP_HWSPINLOCK config to select hwspinlock or not.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-29 10:41:37 +00:00
Jonathan Neuschäfer
983ba99a8f
regulator: Update code examples in documentation
This involves using the REGULATOR_SUPPLY initializer macro and
reindenting some of the code.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-29 10:41:16 +00:00
Magnus Damm
bf50e0ab4f ARM: dts: r8a7791: Update CMT compat strings
Use recently updated R-Car Gen2 CMT0 and CMT1 compat strings.

With this change in place we can keep device-specific configuration in
the driver and the driver can be able to support CMT1 specific features.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-29 11:41:12 +01:00
Jonathan Neuschäfer
2befc01bf7
MAINTAINERS: regulator: Add Documentation/power/regulator/
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-29 10:41:12 +00:00
Magnus Damm
a7f7c96c6c ARM: dts: r8a7790: Update CMT compat strings
Use recently updated R-Car Gen2 CMT0 and CMT1 compat strings.

With this change in place we can keep device-specific configuration in
the driver and the driver can be able to support CMT1 specific features.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-29 11:40:55 +01:00
Magnus Damm
86656e9cc6 ARM: dts: r8a73a4: Update CMT compat string
Use the recently updated r8a73a4 CMT1 compat string.

With this change in place we can keep device-specific configuration in
the driver and the driver can be able to support CMT1 specific features.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-29 11:40:30 +01:00
Nicolin Chen
b89b6925bb
ASoC: fsl_asrc: Fix typo in a field define
ASRFSTi_IAEi has an 11-bit offset as its _SHIFT macro defines.

So this patch just fixes that.

Reported-by: Laurent Charpentier <laurent.charpentier@nxp.com>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-29 10:39:55 +00:00