Commit graph

932,869 commits

Author SHA1 Message Date
Chris Wilson
5f72db5916 dma-buf/fence: Sparse wants __rcu on the object itself
In order to silence sparse in dma_fence_get_rcu_safe(), we need to mark
the incoming fence object as being RCU protected and not the pointer to
the object.

Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: linaro-mm-sig@lists.linaro.org
Cc: linux-media@vger.kernel.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102200336.23347-3-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
[vsyrjala: s/silent/silence/ in commit message]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-11-09 20:32:53 +02:00
Chris Wilson
19d814cc07 drm/syncobj: Mark up the fence as an RCU protected pointer
We take advantage of that syncobj->fence is an RCU-protected pointer, and
so sparse complains that it is lacking annotation.

Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: linaro-mm-sig@lists.linaro.org
Cc: linux-media@vger.kernel.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102200336.23347-2-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-11-09 20:31:18 +02:00
Hyunchul Lee
4f0a03d34d f2fs: apply write hints to select the type of segments for buffered write
Write hints helps F2FS to determine which type of segments would be
selected for buffered write.

This patch implements the mapping from write hints to segment types
as shown below.

  hints               segment type
  -----               ------------
  WRITE_LIFE_SHORT    CURSEG_HOT_DATA
  WRITE_LIFE_EXTREME  CURSEG_COLD_DATA
  others              CURSEG_WARM_DATA

the F2FS poliy for hot/cold seperation has precedence over this hints.
And hints are not applied in in-place update.

Signed-off-by: Hyunchul Lee <cheol.lee@lge.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-09 10:18:16 -08:00
Chao Yu
2fbaa25fde f2fs: introduce scan_curseg_cache for cleanup
Commit 4ac912427c ("f2fs: introduce free nid bitmap") copied codes
from __build_free_nids() into scan_free_nid_bits(), they are redundant,
introduce one common function scan_curseg_cache for cleanup.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-09 10:12:26 -08:00
Eric Anholt
32e823c63e drm/vc4: Reject HDMI modes with too high of clocks.
Peter Robinson reported issues on Fedora with 4k monitors not having
their modes filtered down to 1920x1080 on Raspberry Pi.

v2: Fix vc5 typo in place of vc4.

Cc: Peter Robinson <pbrobinson@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170920225935.14566-1-eric@anholt.net
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1)
2017-11-09 10:10:09 -08:00
Ville Syrjälä
2f7734770c drm/i915: Clean up DP code local variables and calling conventions
Eliminate a ton of pointless 'dev' variables in the DP code, and pass
around 'dev_priv' instead of 'dev'.

v2: Rebase

Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171109152758.32257-1-ville.syrjala@linux.intel.com
2017-11-09 20:06:42 +02:00
Ville Syrjälä
46bd8383d8 drm/i915: Clean up PPS code calling conventions
No need to pass 'dev' or 'dev_priv' when the function already takes
'intel_dp'. Also let's prefer passing 'dev_priv' instead of 'dev'
when we have to pass one or the other.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031205123.13123-10-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
2017-11-09 20:06:29 +02:00
Ville Syrjälä
8f4f279707 drm/i915: Nuke intel_digital_port->port
Remove intel_digital_port->port and replace its users with
intel_encoder->port. intel_encoder->port is a superset of
intel_digital_port->port, and it works correctly even for
MST encoders.

v2: Eliminate a few dp_to_dig_port()->base.port cases too (DK)

Performed with cocci:
@@
@@
struct intel_digital_port {
       ...
-       enum port port;
       ...
}

@@
struct intel_digital_port *D;
expression E;
@@
- D->port = E;

@@
struct intel_digital_port *D;
@@
- D->port
+ D->base.port

@
expression E;
@@
(
- dp_to_dig_port(E)->port
+ dp_to_dig_port(E)->base.port
|
- enc_to_dig_port(E)->port
+ to_intel_encoder(E)->port
)

@@
expression E;
@@
- to_intel_encoder(&E->base)
+ E

@@
struct intel_digital_port *D;
identifier I, M;
@@
  I = &D->base
<...
(
- D->base.M
+ I->M
|
- &D->base
+ I
)
...>

@@
identifier D;
expression E;
identifier M;
@@
 D = enc_to_dig_port(&E->base)
<...
(
- D->base.M
+ E->M
|
- &D->base
+ E
)
...>

@@
identifier D, DP;
expression E;
identifier M;
@@
 DP = enc_to_intel_dp(&E->base)
<...
(
- dp_to_dig_port(DP)->base.M
+ E->M
|
- &dp_to_dig_port(DP)->base
+ E
)
...>

@@
expression E;
identifier M;
@@
(
- enc_to_dig_port(&E->base)->base.M
+ E->M
|
- enc_to_dig_port(&E->base)->base
+ E
|
- enc_to_mst(&E->base)->primary->base.port
+ E->port
)

@@
expression E;
identifier D;
@@
- struct intel_digital_port *D = E;
... when != D

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171109152434.32074-1-ville.syrjala@linux.intel.com
2017-11-09 20:06:14 +02:00
Ville Syrjälä
005b5bc694 drm/i915: Replace dig_port->port with encoder port for BXT DPLL selection
Replace dig_port->port with encoder->port in the BXT DPLL selection.
We can do this because both the master encoder and the fake MST encoders
have the same encoder->port value, whereas using dig_port->port only
worked for the master encoder since the fake encoders were't derived
from intel_digital_port. This eliminates the DP MST special case.

Do this by hand because spatch is having problems with the control
flow due to the dig_port assignment happening in two different
branches.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031205123.13123-8-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
2017-11-09 20:06:06 +02:00
Ville Syrjälä
c249f1f423 drm/i915: Eliminate crtc->config usage from CRT code
Replace crtc->config usage with the passed down crtc state.

Also take the opportunity for some s/pipe_config/crtc_state/ while at it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031205123.13123-7-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
2017-11-09 20:05:18 +02:00
Ville Syrjälä
2e1029c672 drm/i915: Pass crtc state to DPIO PHY functions
Rather than digging through encoder->crtc and crtc->config in the
DPIO PHY functions, pass down the correct crtc state from the caller.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031205123.13123-6-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
2017-11-09 20:05:01 +02:00
Ville Syrjälä
a7f519ba70 drm/i915: Eliminate some encoder->crtc usage from TV code
Extract the current crtc from the crtc state rather than via
the legacy encoder->crtc pointer whenever possible.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031205123.13123-5-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
2017-11-09 20:04:56 +02:00
Ville Syrjälä
463320ae53 drm/i915: Eliminate some encoder->crtc usage from SDVO code
Extract the current crtc from the crtc state rather than via
the legacy encoder->crtc pointer whenever possible.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031205123.13123-4-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
2017-11-09 20:04:47 +02:00
Ville Syrjälä
3c0628f8ce drm/i915: Eliminate some encoder->crtc usage from DSI code
Extract the current crtc from the crtc state rather than via
the legacy encoder->crtc pointer whenever possible.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031205123.13123-3-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
2017-11-09 20:04:35 +02:00
Ville Syrjälä
adc103047e drm/i915: Eliminate some encoder->crtc usage from DP code
Extract the current crtc from the crtc state rather than via
the legacy encoder->crtc pointer whenever possible.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031205123.13123-2-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
2017-11-09 20:04:17 +02:00
Linus Torvalds
d93d4ce103 sound fixes for 4.14
The amount of the changes isn't as quite small as wished, nevertheless
 they are straight fixes that deserve merging to 4.14 final.
 
 Most of fixes are about ALSA core bugs spotted by fuzzer: a follow-up
 fix for the previous nested rwsem patch, a fix to avoid the resource
 hogs due to too many concurrent ALSA timer invocations, and a fix for
 a crash with SYSEX MIDI transfer over OSS sequencer emulation that is
 used by none but fuzzer.
 
 The rest are usual HD-audio and USB-audio device-specific quirks,
 which are safe to apply.
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEECxfAB4MH3rD5mfB6bDGAVD0pKaQFAloEM2wOHHRpd2FpQHN1
 c2UuZGUACgkQbDGAVD0pKaTBhA//RLxylDxyZ/OPOpvCIcF9pPhZdt5Ep16h5bFd
 fr/AmipflVkba6K7auT5JpcwBC+w+24VN2G8huUTZ+HAH1lVVqiSs+XZYw2sHlOi
 uL/DZ0pEVN8412UH/7Iu4vYeiz/XRzd1YtGQkFI4KKrwm10Vz2sR6JHgvLh30/Zz
 pyZrMSsu29yrT1R4l0zI5abEBs23n7vYpi9vsKInP44UkGZwi5iKPH0ThTrCJ92A
 uKOAhIJkGZk0q9GCWnVhe/NWF6t0YK7c4FWqTgXOmIdDpGfylwdjdAsFAFG/cs4x
 n4pZiwO3seFH+6fr4fc0esNqN/adj+15YEyzUmt12ctLKLEELFhJowT9Grnz1Zoq
 jswfkXMJIWdqHQ3YBxlhs4Q8ZM7fDXf/gYqsOIRolxy6dtrJ1SLVjJkhtYWx/T+V
 P++ftn9CQneji1/wqAqUw4HVyc+36rLYK60GKDVtrTCigyilCrq84Yj8W0qAqKJD
 /CK77d1NKdVZ4do+GpzXjwpwNs6LzjSjqkNH2hdDG4gBNoILxxo9GNYSnjOiLxm4
 UCFA6SkD4vlq70VT3vn9YleFq2FzNADQ8jVgliyL1+4mF5baPXKHAdtGJA/HI7Nz
 23wf/1zIoOXd+GymaI20ke2EaVvTVVLDyvQSwFVspmSfu6MA0faGy8AUFJWCR8Nh
 heXgbu0=
 =Q2mh
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "The amount of the changes isn't as quite small as wished, nevertheless
  they are straight fixes that deserve merging to 4.14 final.

  Most of fixes are about ALSA core bugs spotted by fuzzer: a follow-up
  fix for the previous nested rwsem patch, a fix to avoid the resource
  hogs due to too many concurrent ALSA timer invocations, and a fix for
  a crash with SYSEX MIDI transfer over OSS sequencer emulation that is
  used by none but fuzzer.

  The rest are usual HD-audio and USB-audio device-specific quirks,
  which are safe to apply"

* tag 'sound-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - fix headset mic problem for Dell machines with alc274
  ALSA: seq: Fix OSS sysex delivery in OSS emulation
  ALSA: seq: Avoid invalid lockdep class warning
  ALSA: timer: Limit max instances per timer
  ALSA: usb-audio: support new Amanero Combo384 firmware version
2017-11-09 09:58:11 -08:00
Prarit Bhargava
69b6f8a9b7 tools/power/cpupower: add libcpupower.so.0.0.1 to .gitignore
Commit ac5a181d06 ("cpupower: Add cpuidle parts into library") added
libcpupower.so.0.0.1 which should be hidden from git commands.  This
patch changes the ignore to all libcpupower.so.* .

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-11-09 10:52:22 -07:00
Prarit Bhargava
d4dbfa4bb4 tools/power/cpupower: Add 64 bit library detection
The kernel-tools-lib rpm is installing the library to /usr/lib64, and not
/usr/lib as the cpupower Makefile is doing in the kernel tree.  This
resulted in a conflict between the two libraries.  After looking at how
other tools installed libraries, and looking at the perf code in
tools/perf it looks like installing to /usr/lib64 for 64-bit arches is the
correct thing to do.

Checks with 'ldd cpupower' on SLES, RHEL, Fedora, and Ubuntu result in
the correct binary AFAICT:

[root@testsystem cpupower]# ldd cpupower | grep cpupower
        libcpupower.so.0 => /lib64/libcpupower.so.0 (0x00007f1dab447000)

Commit ac5a181d06 ("cpupower: Add cpuidle parts into library") added a
new cpupower library version.  On Fedora, executing the cpupower binary
then resulted in this error

[root@testsystem cpupower]# ./cpupower monitor
./cpupower: symbol lookup error: ./cpupower: undefined symbol:
get_cpu_topology

64-bit libraries should be installed to /usr/lib64, and other libraries
should be installed to /usr/lib.

This code was taken from the perf Makefile.config which supports /usr/lib
and /usr/lib64.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-11-09 10:50:40 -07:00
Fan Li
9745657449 f2fs: optimize the way of traversing free_nid_bitmap
We call scan_free_nid_bits only when there isn't many
free nids left, it means that marked bits in free_nid_bitmap
are supposed to be few, use find_next_bit_le is more
efficient in such case.
According to my tests, use find_next_bit_le instead of
test_bit_le will cut down the traversal time to one
third of its original.

Signed-off-by: Fan li <fanofcode.li@samsung.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-09 09:43:09 -08:00
Vijendar Mukunda
31c45b3e8d
ASoC: amd: Modified DMA transfer Mechanism for Playback
Before rendering starts, DMA driver copies full buffer valid data
to ACP SRAM for the first time, after that ACP SRAM to I2S
FIFO DMA will be initiated. After rendering first half of ACP SRAM,
IOC will be raised then Audio data will be copied from first half of
System Memory to first half of ACP SRAM. Similarly after rendering
second half of ACP SRAM, IOC will be raised then Audio Data will be
copied from second half of the System Memory to second half of the
ACP SRAM in ping-pong way till rendering stops.

Old design introducing latency issues resulting stutter sound observed
during playback.

Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Akshu Agrawal <Akshu.Agrawal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-09 17:41:33 +00:00
Fan Li
74986213ad f2fs: keep scanning until enough free nids are acquired
In current version, after scan_free_nid_bits, the scan is over if
nid_cnt[FREE_NID] != 0. In most cases, there are still free nids in the
free list during the scan, and scan_free_nid_bits usually can't increase
nid_cnt[FREE_NID]. It causes that __build_free_nids is called many times
without solving the shortage of the free nids. This patch fixes that.

Signed-off-by: Fan li <fanofcode.li@samsung.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-09 09:41:08 -08:00
Akshu Agrawal
0c279a590f
ASoC: rt5645: Wait for 400msec before concluding on value of RT5645_VENDOR_ID2
Minimum time required between power On of codec and read
of RT5645_VENDOR_ID2 is 400msec. We should wait that long
before reading the value.

TEST=Cold boot the device and check for sound device.

Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-09 17:40:59 +00:00
Linus Torvalds
d1041cdc60 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix use-after-free in IPSEC input parsing, desintation address
    pointer was loaded before pskb_may_pull() which can change the SKB
    data pointers. From Florian Westphal.

 2) Stack out-of-bounds read in xfrm_state_find(), from Steffen
    Klassert.

 3) IPVS state of SKB is not properly reset when moving between
    namespaces, from Ye Yin.

 4) Fix crash in asix driver suspend and resume, from Andrey Konovalov.

 5) Don't deliver ipv6 l2tp tunnel packets to ipv4 l2tp tunnels, and
    vice versa, from Guillaume Nault.

 6) Fix DSACK undo on non-dup ACKs, from Priyaranjan Jha.

 7) Fix regression in bond_xmit_hash()'s behavior after the TCP port
    selection changes back in 4.2, from Hangbin Liu.

 8) Two divide by zero bugs in USB networking drivers when parsing
    descriptors, from Bjorn Mork.

 9) Fix bonding slaves being stuck in BOND_LINK_FAIL state, from Jay
    Vosburgh.

10) Missing skb_reset_mac_header() in qmi_wwan, from Kristian Evensen.

11) Fix the destruction of tc action object races properly, from Cong
    Wang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (31 commits)
  cls_u32: use tcf_exts_get_net() before call_rcu()
  cls_tcindex: use tcf_exts_get_net() before call_rcu()
  cls_rsvp: use tcf_exts_get_net() before call_rcu()
  cls_route: use tcf_exts_get_net() before call_rcu()
  cls_matchall: use tcf_exts_get_net() before call_rcu()
  cls_fw: use tcf_exts_get_net() before call_rcu()
  cls_flower: use tcf_exts_get_net() before call_rcu()
  cls_flow: use tcf_exts_get_net() before call_rcu()
  cls_cgroup: use tcf_exts_get_net() before call_rcu()
  cls_bpf: use tcf_exts_get_net() before call_rcu()
  cls_basic: use tcf_exts_get_net() before call_rcu()
  net_sched: introduce tcf_exts_get_net() and tcf_exts_put_net()
  Revert "net_sched: hold netns refcnt for each action"
  net: usb: asix: fill null-ptr-deref in asix_suspend
  Revert "net: usb: asix: fill null-ptr-deref in asix_suspend"
  qmi_wwan: Add missing skb_reset_mac_header-call
  bonding: fix slave stuck in BOND_LINK_FAIL state
  qrtr: Move to postcore_initcall
  net: qmi_wwan: fix divide by 0 on bad descriptors
  net: cdc_ether: fix divide by 0 on bad descriptors
  ...
2017-11-09 09:31:34 -08:00
Tim Hansen
478f8da0f7 fs/xfs: Remove NULL check before kmem_cache_destroy
kmem_cache_destroy already checks for null values.

Signed-off-by: Tim Hansen <devtimhansen@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-09 09:23:47 -08:00
Kirill A. Shutemov
be739f4b5d x86/mm: Fix ELF_ET_DYN_BASE for 5-level paging
On machines with 5-level paging we don't want to allocate mapping above
47-bit unless user explicitly asked for it. See b569bab78d ("x86/mm:
Prepare to expose larger address space to userspace") for details.

c715b72c1b ("mm: revert x86_64 and arm64 ELF_ET_DYN_BASE base
changes") broke the behaviour. After the commit elf binary and heap got
mapped above 47-bits.

Use DEFAULT_MAP_WINDOW instead of TASK_SIZE to determine ELF_ET_DYN_BASE so
it's forced to be below 47-bits unconditionally.

Fixes: c715b72c1b ("mm: revert x86_64 and arm64 ELF_ET_DYN_BASE base changes")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20171107103804.47341-1-kirill.shutemov@linux.intel.com
2017-11-09 18:20:20 +01:00
Darrick J. Wong
4da4b10b5b xfs: only check da node header padding on v5 filesystems
It turns out that we only started zeroing a new da btree node's block
header on v5 filesystems.  Prior to that, we just wouldn't set anything
at all, which means that the pad field never got set and would retain
whatever happened to be in memory.

Therefore, we can only check the pad for zeroness on v5 filesystems.
shared/006 on a v4 filesystem exposes this scrub bug.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2017-11-09 09:10:45 -08:00
Darrick J. Wong
a605e86912 xfs: fix btree scrub deref check
The btree scrubber has some custom code to retrieve and check a btree
block via xfs_btree_lookup_get_block.  This function will either return
an error code (verifiers failed) or a *pblock will be untouched (bad
pointer).  Since we previously set *pblock to NULL, we need to check
*pblock, not pblock, to trigger the early bailout.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2017-11-09 09:10:45 -08:00
Darrick J. Wong
72f76f7364 xfs: fix uninitialized return values in scrub code
Fix smatch complaints about uninitialized return codes.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2017-11-09 09:10:45 -08:00
Darrick J. Wong
0a1e1567b3 xfs: pass inode number to xfs_scrub_ino_set_{preen,warning}
There are two ways to scrub an inode -- calling xfs_iget and checking
the raw inode core, or by loading the inode cluster buffer and checking
the on-disk contents directly.  The second method is only useful if
_iget fails the verifiers; when this is the case, sc->ip is NULL and
calling the tracepoint will cause a system crash.

Therefore, pass the raw inode number directly into the _preen and
_warning functions.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2017-11-09 09:10:45 -08:00
Darrick J. Wong
35ce852334 xfs: refactor the directory data block bestfree checks
In a directory data block, the zeroth bestfree item must point to the
longest free space.  Therefore, when we check the bestfree block's
records against the data blocks, we only need to compare with bf[0] and
don't need the loop.

The weird loop was most probably the result of an earlier refactoring
gone bad.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2017-11-09 09:10:45 -08:00
Mathieu Malaterre
fe1a5cbc78 watchdog: jz4780: Allow selection of jz4740-wdt driver
This driver works for jz4740 & jz4780.

Suggested-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: linux-mips@linux-mips.org
Cc: linux-watchdog@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17251/
Signed-off-by: James Hogan <jhogan@kernel.org>
2017-11-09 17:09:48 +00:00
Geert Uytterhoeven
ac831a379d fbdev: controlfb: Add missing modes to fix out of bounds access
Dan's static analysis says:

    drivers/video/fbdev/controlfb.c:560 control_setup()
    error: buffer overflow 'control_mac_modes' 20 <= 21

Indeed, control_mac_modes[] has only 20 elements, while VMODE_MAX is 22,
which may lead to an out of bounds read when parsing vmode commandline
options.

The bug was introduced in v2.4.5.6, when 2 new modes were added to
macmodes.h, but control_mac_modes[] wasn't updated:

https://kernel.opensuse.org/cgit/kernel/diff/include/video/macmodes.h?h=v2.5.2&id=29f279c764808560eaceb88fef36cbc35c529aad

Augment control_mac_modes[] with the two new video modes to fix this.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-09 18:09:33 +01:00
Gustavo A. R. Silva
826bb72879 video: fbdev: sis_main: mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 115025
Addresses-Coverity-ID: 115026
Addresses-Coverity-ID: 115027
Addresses-Coverity-ID: 115028
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-09 18:09:33 +01:00
Gustavo A. R. Silva
8c15220868 video: fbdev: cirrusfb: mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Notice that in this particular case I placed the "fall through" comment
on its own line, which is what GCC is expecting to find.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-09 18:09:32 +01:00
Gustavo A. R. Silva
0101f48ae5 video: fbdev: aty: radeon_pm: mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-09 18:09:32 +01:00
Gustavo A. R. Silva
f5ed28d318 video: fbdev: sm501fb: mark expected switch fall-through in sm501fb_blank_crt
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-09 18:09:32 +01:00
Colin Ian King
3725369f94 video: fbdev: intelfb: remove redundant variables
Variables err_max, err_target and f_best are being assigned values but
these are never read, hence they are redundant variables and can be
removed. Cleans up clang warnings:

drivers/video/fbdev/intelfb/intelfbhw.c:946:2: warning: Value stored to
'err_max' is never read
drivers/video/fbdev/intelfb/intelfbhw.c:947:2: warning: Value stored to
'err_target' is never read
drivers/video/fbdev/intelfb/intelfbhw.c:995:6: warning: Value stored to
'f_best' is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Maik Broemme <mbroemme@libmpq.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-09 18:09:32 +01:00
Markus Elfring
6b04e9f256 video/fbdev/dnfb: Use common error handling code in dnfb_probe()
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-09 18:09:31 +01:00
Sudip Mukherjee
ffb66624ca sm501fb: suspend and resume fb if it exists
There are cases when panel and crt both are not defined and only one of
them is defined and initialized. In such cases, suspend or resume it
only if it is defined.

Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-09 18:09:31 +01:00
Sudip Mukherjee
35bfbf70b2 sm501fb: unregister framebuffer only if registered
There are cases when panel and crt both are not defined and only one of
them is defined and initialized. In such cases, while removing the
device, unregister the framebuffer only if it was registered.

Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-09 18:09:31 +01:00
Sudip Mukherjee
d9b1fe6516 sm501fb: deallocate colormap only if allocated
There are cases when panel and crt both are not defined and only one of
them is defined and initialized. In such cases, while removing the
device deallocate the colormap only if that particular fb is defined.

Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-09 18:09:31 +01:00
Aleksandar Markovic
31ff6b2a42 video: goldfishfb: Add support for device tree bindings
Add ability to the Goldfish FB driver to be recognized by OS via DT.

Signed-off-by: Miodrag Dinic <miodrag.dinic@mips.com>
Signed-off-by: Goran Ferenc <goran.ferenc@mips.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: Douglas Leung <douglas.leung@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petar Jovanovic <petar.jovanovic@mips.com>
Cc: Raghu Gandham <raghu.gandham@mips.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-09 18:09:31 +01:00
Aleksandar Markovic
bad12f43d0 Documentation: Add device tree binding for Goldfish FB driver
Add documentation for DT binding of Goldfish FB driver. The compatible
string used by OS for binding the driver is "google,goldfish-fb".

Signed-off-by: Miodrag Dinic <miodrag.dinic@mips.com>
Signed-off-by: Goran Ferenc <goran.ferenc@mips.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Douglas Leung <douglas.leung@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petar Jovanovic <petar.jovanovic@mips.com>
Cc: Raghu Gandham <raghu.gandham@mips.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-09 18:09:30 +01:00
Ladislav Michl
c987694755 video: udlfb: Fix read EDID timeout
While usb_control_msg function expects timeout in miliseconds, a value
of HZ is used. Replace it with USB_CTRL_GET_TIMEOUT and also fix error
message which looks like:
udlfb: Read EDID byte 78 failed err ffffff92
as error is either negative errno or number of bytes transferred use %d
format specifier.

Returned EDID is in second byte, so return error when less than two bytes
are received.

Fixes: 18dffdf891 ("staging: udlfb: enhance EDID and mode handling support")
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Cc: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-09 18:09:30 +01:00
Bartlomiej Zolnierkiewicz
1e7d4beba2 video: fbdev: remove dead igafb driver
igafb driver hasn't compiled since at least kernel v2.6.34 as
commit 6016a363f6 ("of: unify phandle name in struct device_node")
missed updating igafb.c to use dp->phandle instead of dp->node.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-09 18:09:30 +01:00
Stefan Agner
2d81482821 video: fbdev: mxsfb: fix pixelclock polarity
The PIXDATA flags of the display_flags enum are controller centric,
e.g. NEGEDGE means the controller shall drive the data signals on
pixelclocks negative edge. However, the drivers flag is display
centric: Sample the data on negative (falling) edge.

Therefore, change the if statement to check for the POSEDGE flag
(which is typically not set):
Drive on positive edge => sample on negative edge

Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Liu Ying <Ying.Liu@freescale.com>
Cc: Lothar Waßmann <LW@KARO-electronics.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Max Krummenacher <max.krummenacher@toradex.com>
Cc: Mauro Salvini <mauro.salvini@smigroup.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-09 18:09:30 +01:00
Christophe JAILLET
ab798b9087 video: fbdev: au1200fb: Style clean up
Style clean-up.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-09 18:09:30 +01:00
Christophe JAILLET
0620865611 video: fbdev: au1200fb: Propagate an error code
We should propagate the error code returned by 'fb_alloc_cmap()' instead
of returning -EFAULT.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-09 18:09:29 +01:00
Christophe JAILLET
58a81afcff video: fbdev: au1200fb: Remove some dead code
There is no need to shut gcc up. It should not complain.
Axe 'fbdev', it is never used in this function.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-09 18:09:29 +01:00
Christophe JAILLET
6bbbb6805a video: fbdev: au1200fb: Fix error handling path
Rewrite the exit path based on 'au1200fb_drv_remove()'.
We can safely iterate for all already handled planes. Even if not
completely initialized, the functions that are called will silently accept
the 'fb_info' structure that is passed.

As soon as we find a NULL in the '_au1200fb_infos' array, we know that we
have released all what we needed to release. So we can 'break'.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-09 18:09:29 +01:00