Correct a corner case where newly created volumes are not detected
automatically on an external RAID controller that has no configured
volumes during initial device discovery.
The fix is to set the discovery_polling flag when an external RAID
controller is detected. This causes a device rescan every 20-30 seconds,
so that newly created volumes will be detected automatically.
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Tell hpsa controller to generate a checkpoint for rare lockup
conditions.
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
clean up stale information.
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
I am resubmitting this patch on behalf of Martin Wilck with his
permission.
The original patch can be found here:
https://www.spinics.net/lists/linux-scsi/msg102083.html
This patch did not help until Hannes's
commit 9441284fbc39 ("scsi-fixup-kernel-warning-during-rmmod")
was applied to the kernel.
--------------------------------------
Original patch description from Martin:
--------------------------------------
When the hpsa module is unloaded using rmmod, dangling
symlinks remain under /sys/class/sas_phy. Fix this by
calling sas_phy_delete() rather than sas_phy_free (which,
according to comments, should not be called for PHYs that
have been set up successfully, anyway).
Tested-by: Don Brace <don.brace@microsemi.com>
Reviewed-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin Wilck <mwilck@suse.de>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch cleans up a lot of warnings when unloading the driver.
A current example of the stack trace starts with:
[ 142.570715] sysfs group 'power' not found for kobject 'port-5:0'
There can be hundreds of these messages during a driver unload.
I am resubmitting this patch on behalf of Martin Wilck with his
permission.
His original patch can be found here:
https://www.spinics.net/lists/linux-scsi/msg102085.html
This patch did not help until Hannes's
commit 9441284fbc39 ("scsi-fixup-kernel-warning-during-rmmod")
was applied to the kernel.
---------------------------
Original patch description:
---------------------------
Unloading the hpsa driver causes warnings
[ 1063.793652] WARNING: CPU: 1 PID: 4850 at ../fs/sysfs/group.c:237 device_del+0x54/0x240()
[ 1063.793659] sysfs group ffffffff81cf21a0 not found for kobject 'port-2:0'
with two different stacks:
1)
[ 1063.793774] [<ffffffff81448af4>] device_del+0x54/0x240
[ 1063.793780] [<ffffffff8145178a>] transport_remove_classdev+0x4a/0x60
[ 1063.793784] [<ffffffff81451216>] attribute_container_device_trigger+0xa6/0xb0
[ 1063.793802] [<ffffffffa0105d46>] sas_port_delete+0x126/0x160 [scsi_transport_sas]
[ 1063.793819] [<ffffffffa036ebcc>] hpsa_free_sas_port+0x3c/0x70 [hpsa]
2)
[ 1063.797103] [<ffffffff81448af4>] device_del+0x54/0x240
[ 1063.797118] [<ffffffffa0105d4e>] sas_port_delete+0x12e/0x160 [scsi_transport_sas]
[ 1063.797134] [<ffffffffa036ebcc>] hpsa_free_sas_port+0x3c/0x70 [hpsa]
This is caused by the fact that host device hostX is deleted before the
SAS transport devices hostX/port-a:b.
This patch fixes this by reverting the order of device deletions.
Tested-by: Don Brace <don.brace@microsemi.com>
Reviewed-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin Wilck <mwilck@suse.de>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently the SB8 MIDI code sets up the timer object at each time
before scheduling it at trigger callback, but basically this is
superfluous once after set up. Also, the code misses the
del_timer_sync() call that may leave a race condition for
use-after-free.
This patch addresses these issues, moving timer_setup() to
snd_sb8dsp_midi(), and adding the del_timer_sync() call at
snd_sb8dsp_midi_output_trigger() to make sure.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
[Re-use the existing chip->midi_substream_output instead of assigning
a new field to struct snd_sb -- tiwai]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
drivers/usb/host/xhci-mtk.c:256:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Fixes: b6bb72cf0d ("usb: xhci-mtk: add optional mcu and dma bus clocks")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm_mode_create_lease
Creates a lease for a list of drm mode objects, returning an
fd for the new drm_master and a 64-bit identifier for the lessee
drm_mode_list_lesees
List the identifiers of the lessees for a master file
drm_mode_get_lease
List the leased objects for a master file
drm_mode_revoke_lease
Erase the set of objects managed by a lease.
This should suffice to at least create and query leases.
Changes for v2 as suggested by Daniel Vetter <daniel.vetter@ffwll.ch>:
* query ioctls only query the master associated with
the provided file.
* 'mask_lease' value has been removed
* change ioctl has been removed.
Changes for v3 suggested in part by Dave Airlie <airlied@gmail.com>
* Add revoke ioctl.
Changes for v4 suggested by Dave Airlie <airlied@gmail.com>
* Expand on the comment about the magic use of &drm_lease_idr_object
* Pad lease ioctl structures to align on 64-bit boundaries
Changes for v5 suggested by Dave Airlie <airlied@gmail.com>
* Check for non-negative object_id in create_lease to avoid debug
output from the kernel.
Changes for v6 provided by Dave Airlie <airlied@gmail.com>
* For non-universal planes add primary/cursor planes to lease
If we aren't exposing universal planes to this userspace client,
and it requests a lease on a crtc, we should implicitly export the
primary and cursor planes for the crtc.
If the lessee doesn't request universal planes, it will just see
the crtc, but if it does request them it will then see the plane
objects as well.
This also moves the object look ups earlier as a side effect, so
we'd exit the ioctl quicker for non-existant objects.
* Restrict leases to crtc/connector/planes.
This only allows leasing for objects we wish to allow.
Changes for v7 provided by Dave Airlie <airlied@gmail.com>
* Check pad args are 0
* Check create flags and object count are valid.
* Check return from fd allocation
* Refactor lease idr setup and add some simple validation
* Use idr_mutex uniformly (Keith)
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Attempts to modify un-leased objects are rejected with an error.
Information returned about unleased objects is modified to make them
appear unusable and/or disconnected.
Changes for v2 as suggested by Daniel Vetter <daniel.vetter@ffwll.ch>:
* With the change in the __drm_mode_object_find API to pass the
file_priv along, we can now centralize most of the lease-based
access checks in that function.
* A few places skip that API and require in-line checks.
Changes for v3 provided by Dave Airlie <airlied@redhat.com>
* remove support for leasing encoders.
* add support for leasing planes.
Changes for v4
* Only call drm_lease_held if DRIVER_MODESET.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This provides new data structures to hold "lease" information about
drm mode setting objects, and provides for creating new drm_masters
which have access to a subset of the available drm resources.
An 'owner' is a drm_master which is not leasing the objects from
another drm_master, and hence 'owns' them.
A 'lessee' is a drm_master which is leasing objects from some other
drm_master. Each lessee holds the set of objects which it is leasing
from the lessor.
A 'lessor' is a drm_master which is leasing objects to another
drm_master. This is the same as the owner in the current code.
The set of objects any drm_master 'controls' is limited to the set of
objects it leases (for lessees) or all objects (for owners).
Objects not controlled by a drm_master cannot be modified through the
various state manipulating ioctls, and any state reported back to user
space will be edited to make them appear idle and/or unusable. For
instance, connectors always report 'disconnected', while encoders
report no possible crtcs or clones.
The full list of lessees leasing objects from an owner (either
directly, or indirectly through another lessee), can be searched from
an idr in the drm_master of the owner.
Changes for v2 as suggested by Daniel Vetter <daniel.vetter@ffwll.ch>:
* Sub-leasing has been disabled.
* BUG_ON for lock checking replaced with lockdep_assert_held
* 'change' ioctl has been removed.
* Leased objects can always be controlled by the lessor; the
'mask_lease' flag has been removed
* Checking for leased status has been simplified, replacing
the drm_lease_check function with drm_lease_held.
Changes in v3, some suggested by Dave Airlie <airlied@gmail.com>
* Add revocation. This allows leases to be effectively revoked by
removing all of the objects they have access to. The lease itself
hangs around as it's hanging off a file.
* Free the leases IDR when the master is destroyed
* _drm_lease_held should look at lessees, not lessor
* Allow non-master files to check for lease status
Changes in v4, suggested by Dave Airlie <airlied@gmail.com>
* Formatting and whitespace changes
Changes in v5 (airlied)
* check DRIVER_MODESET before lease destroy call
* check DRIVER_MODESET for lease revoke (Chris)
* Use idr_mutex uniformly for all lease elements of struct drm_master. (Keith)
Signed-off-by: Keith Packard <keithp@keithp.com>
sparse warns:
fs/ceph/caps.c:2042:9: warning: context imbalance in 'try_flush_caps' - wrong count at exit
We need to exit this function with the lock unlocked, but a couple of
cases leave it locked.
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The new detection code for guest machine checks added a check based
on %r11 to .Lcleanup_sie to distinguish between normal asynchronous
interrupts and machine checks. But the funtion is called from the
program check handler as well with an undefined value in %r11.
The effect is that all program exceptions pointing to the SIE instruction
will set the CIF_MCCK_GUEST bit. The bit stays set for the CPU until the
next machine check comes in which will incorrectly be interpreted as a
guest machine check.
The simplest fix is to stop using .Lcleanup_sie in the program check
handler and duplicate a few instructions.
Fixes: c929500d7a ("s390/nmi: s390: New low level handling for machine check happening in guest")
Cc: <stable@vger.kernel.org> # v4.13+
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Hightlights include:
- Fix a list corruption in xprt_release()
- Fix a workqueue lockdep warning due to unsafe use of cancel_work_sync()
-----BEGIN PGP SIGNATURE-----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=M0ih
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.14-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
- Fix a list corruption in xprt_release()
- Fix a workqueue lockdep warning due to unsafe use of
cancel_work_sync()
* tag 'nfs-for-4.14-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: Destroy transport from the system workqueue
SUNRPC: fix a list corruption issue in xprt_release()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: David Howells <dhowells@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Francois Romieu <romieu@fr.zoreil.com>
Cc: Daniele Venzano <venza@brownhat.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniele Venzano <venza@brownhat.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using an explicit static variable to hold
additional expiration details.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Bhumika Goyal <bhumirks@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Reshetova, Elena" <elena.reshetova@intel.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Mike Maloney <maloney@google.com>
Cc: Jarno Rajahalme <jarno@ovn.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Arvid Brodin <arvid.brodin@alten.se>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Adds a pointer back to the sock.
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: dccp@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
Cc: Edward Cree <ecree@solarflare.com>
Cc: Bert Kenward <bkenward@solarflare.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: "Reshetova, Elena" <elena.reshetova@intel.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Joerg Reuter <jreuter@yaina.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-hams@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-sctp@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long says:
====================
net: remove rtmsg_ifinfo used in bridge and bonding
It's better to send notifications to userspace by the events in
rtnetlink_event, instead of calling rtmsg_ifinfo directly.
This patcheset is to remove rtmsg_ifinfo called in bonding and
bridge, the notifications can be handled by NETDEV_CHANGEUPPER
and NETDEV_CHANGELOWERSTATE events in rtnetlink_event.
It could also fix some redundant notifications from bonding and
bridge.
v1->v2:
- post to net-next.git instead of net.git, for it's more like an
improvement for bonding
v2->v3:
- add patch 1/4 to remove rtmsg_ifinfo called in add_del_if
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
After the patch 'rtnetlink: bring NETDEV_CHANGELOWERSTATE event
process back to rtnetlink_event', bond_lower_state_changed would
generate NETDEV_CHANGEUPPER event which would send a notification
to userspace in rtnetlink_event.
There's no need to call rtmsg_ifinfo to send the notification
any more. So this patch is to remove it from these places after
bond_lower_state_changed.
Besides, after this, rtmsg_ifinfo is not needed to be exported.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to bring NETDEV_CHANGELOWERSTATE event process back
to rtnetlink_event so that bonding could use it instead of calling
rtmsg_ifinfo to send a notification to userspace after netdev lower
state is changed in the later patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 42e52bf9e3 ("net: add netnotifier event for upper device
change"), netdev_master_upper_dev_link has generated NETDEV_CHANGEUPPER
event which would send a notification to userspace in rtnetlink_event.
There's no need to call rtmsg_ifinfo to send the notification any more.
So this patch is to remove it from bond_master_upper_dev_link as well
as bond_upper_dev_unlink to avoid the redundant notifications.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit dc709f3757 ("rtnetlink: bring NETDEV_CHANGEUPPER event
process back in rtnetlink_event"), rtnetlink_event would process the
NETDEV_CHANGEUPPER event and send a notification to userspace.
In add_del_if, it would generate NETDEV_CHANGEUPPER event by whether
netdev_master_upper_dev_link or netdev_upper_dev_unlink. There's
no need to call rtmsg_ifinfo to send the notification any more.
So this patch is to remove it from add_del_if also to avoid redundant
notifications.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the case of pdata, the dsa_cpu_parse function calls dev_put() before
making sure it isn't NULL. Fix this.
Fixes: 71e0bbde0d ("net: dsa: Add support for platform data")
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonghong Song says:
====================
bpf: permit multiple bpf attachments for a single perf tracepoint event
This patch set adds support to permit multiple bpf prog attachments
for a single perf tracepoint event. Patch 1 does some cleanup such
that perf_event_{set|free}_bpf_handler is called under the
same condition. Patch 2 has the core implementation, and
Patch 3 adds a test case.
Changelogs:
v2 -> v3:
. fix compilation error.
v1 -> v2:
. fix a potential deadlock issue discovered by Daniel.
. fix some coding style issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The bpf sample program syscall_tp is modified to
show attachment of more than bpf programs
for a particular kernel tracepoint.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch enables multiple bpf attachments for a
kprobe/uprobe/tracepoint single trace event.
Each trace_event keeps a list of attached perf events.
When an event happens, all attached bpf programs will
be executed based on the order of attachment.
A global bpf_event_mutex lock is introduced to protect
prog_array attaching and detaching. An alternative will
be introduce a mutex lock in every trace_event_call
structure, but it takes a lot of extra memory.
So a global bpf_event_mutex lock is a good compromise.
The bpf prog detachment involves allocation of memory.
If the allocation fails, a dummy do-nothing program
will replace to-be-detached program in-place.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a cleanup such that doing the same check in
perf_event_free_bpf_prog as we already do in
perf_event_set_bpf_prog step.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sock lock may be taken in the message timer function which is a
problem since timers run in BH. Instead of timers use delayed_work.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: bbb03029a8 ("strparser: Generalize strparser")
Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, ip6_tnl_xmit_ctl drops tunneled packets if the remote
address (outer v6 destination) is one of host's locally configured
addresses.
Same applies to ip6_tnl_rcv_ctl: it drops packets if the remote address
(outer v6 source) is a local address.
This prevents using ipxip6 (and ip6_gre) tunnels whose local/remote
endpoints are on same host; OTOH v4 tunnels (ipip or gre) allow such
configurations.
An example where this proves useful is a system where entities are
identified by their unique v6 addresses, and use tunnels to encapsulate
traffic between them. The limitation prevents placing several entities
on same host.
Introduce IP6_TNL_F_ALLOW_LOCAL_REMOTE which allows to bypass this
restriction.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If you do not set sk_sndtimeo you will get -ERESTARTSYS if there is a
pending signal when you enter sendmsg, which we handle properly.
However if you set a timeout for your commands we'll set sk_sndtimeo to
that timeout, which means that sendmsg will start returning -EINTR
instead of -ERESTARTSYS. Fix this by checking either cases and doing
the correct thing.
Cc: stable@vger.kernel.org
Fixes: dc88e34d69 ("nbd: set sk->sk_sndtimeo for our sockets")
Reported-and-tested-by: Daniel Xu <dlxu@fb.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is reasonable drop page cache on discard, otherwise that pages may
be written by writeback second later, so thin provision devices will
not be happy. This seems to be a security leak in case of secure discard case.
Also add check for queue_discard flag on early stage.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The idea to have the intel-spi driver dependent on EXPERT was exactly
because we did not want ordinary users playing with the device and
inadvertently overwrite their BIOSes (if it is not protected). This
seems to be superfluous hence remove it.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
Abstract functions of clock setting, to avoid duplicated code,
these functions been used in new feature.
Implement suspend/resume functions.
Signed-off-by: Guochun Mao <guochun.mao@mediatek.com>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
Add "mediatak,mt2712-nor" and "mediatek,mt7622-nor"
for nor flash node's compatible strings.
Explicate the fallback compatible.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guochun Mao <guochun.mao@mediatek.com>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
The latest version of DMC on CNL is 1.06.
Update the version so as to load the
latest firmware.
Release Notes:
Version: 1.06
1. DDI and AUX IO related fix.
v2: Improve the prefixes in commit message.
Add Release Notes directly. (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507053588-677-1-git-send-email-anusha.srivatsa@intel.com
Add a HiSilicon STB SoC PCIe controller driver. This controller is based
on the DesignWare PCIe core.
Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add resizable BAR infrastructure, including defines and helper functions to
read the possible sizes of a BAR and update its size. See PCIe r3.1, sec
7.22.
Link: https://pcisig.com/sites/default/files/specification_documents/ECN_Resizable-BAR_24Apr2008.pdf
Signed-off-by: Christian König <christian.koenig@amd.com>
[bhelgaas: rename to functions with "rebar" (to match #defines), drop shift
#defines, drop "_MASK" suffixes, fix typos, fix kerneldoc]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Add a #define for the PCI resource type mask. We use this mask multiple
times in the bus setup.
Signed-off-by: Christian König <christian.koenig@amd.com>
[bhelgaas: move to setup-bus.c]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable dm_cache_metadata.ref_count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable table_device.count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable dm_dev_internal.count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>