Commit graph

932,869 commits

Author SHA1 Message Date
Arvind Yadav
bdff148086 serial-uartlite: pr_err() strings should end with newlines
pr_err() messages should end with a new-line to avoid other messages
being concatenated.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20 14:20:06 +02:00
Johan Hovold
22b276a407 serdev: enable TTY port controller support by default
Amend the Serial device bus Kconfig entries to clarify that you most
likely also want to enable TTY port controller support, and make
SERIAL_DEV_CTRL_TTYPORT default to Y (when bus support is enabled).

Note that the TTY port controller is currently the only in-kernel
serdev controller implementation.

Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20 14:20:06 +02:00
Hans Verkuil
fb83be8873 drm/tegra: hdmi: Add cec-notifier support
In order to support CEC the HDMI driver has to inform the CEC driver
whenever the physical address changes. So when the EDID is read the
CEC driver has to be informed and whenever the hotplug detect goes
away.

This is done through the cec-notifier framework.

The link between the HDMI driver and the CEC driver is done through
the hdmi-phandle property in the tegra-cec node in the device tree.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:54 +02:00
Thierry Reding
a2f2f7403e drm/tegra: dc: Perform a complete reset sequence
In order for the reset to be applied properly, the module clock must be
enabled during the assertion.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:54 +02:00
Thierry Reding
39e08affec drm/tegra: dc: Make sure to set the module clock rate
When applying the PLL changes from the computed state object, make sure
to set the rate of the display controller module clock. Failing to do so
can yield to a situation where the parent will be set to the proper
pixel clock, but the module clock will be divided down to the rate that
is happened to be set to before the parent rate change.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:54 +02:00
Thierry Reding
a4bfa0961c drm/tegra: dc: Simplify atomic plane helper functions
Remove the tegra_dc_disable_window() function whose only purpose was to
allow tegra_plane_atomic_update() to also call it. Fix that by shuffling
tegra_plano_atomic_disable() to before tegra_plane_atomic_update().

While at it, also remove the overlay plane helper functions because they
are exactly the same as the primary plane helper functions.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:54 +02:00
Thierry Reding
2d1c18fb0d drm/tegra: dc: Move some declarations to dc.h
Move the DC related declarations in drm.h to dc.h where they belong.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:54 +02:00
Thierry Reding
829ce7a68f drm/tegra: vic: Use of_device_get_match_data()
Avoid some boilerplate by calling of_device_get_match_data() instead of
open-coding the equivalent in the driver.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:54 +02:00
Thierry Reding
5faea3d0f8 drm/tegra: sor: Use of_device_get_match_data()
Avoid some boilerplate by calling of_device_get_match_data() instead of
open-coding the equivalent in the driver.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:53 +02:00
Thierry Reding
5e4acd30f3 drm/tegra: hdmi: Use of_device_get_match_data()
Avoid some boilerplate by calling of_device_get_match_data() instead of
open-coding the equivalent in the driver.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:53 +02:00
Thierry Reding
b9ff7aeaef drm/tegra: dc: Use of_device_get_match_data()
Avoid some boilerplate by calling of_device_get_match_data() instead of
open-coding the equivalent in the driver.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:53 +02:00
Mikko Perttunen
a176c67d71 drm/tegra: Use u64_to_user_ptr helper
Use the u64_to_user_ptr helper macro to cast IOCTL argument u64 values
to user pointers instead of writing out the cast manually. Also do
some other cleanup with user pointers to make them stand out more
and look cleaner.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:52 +02:00
Mikko Perttunen
45bd862c28 gpu: host1x: Fix incorrect comment for channel_request
This function actually doesn't sleep in the version that was merged.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:52 +02:00
Mikko Perttunen
2a79c034b5 gpu: host1x: Disassemble more instructions
The disassembler for debug dumps was missing some newer host1x opcodes.
Add disassembly support for these.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:52 +02:00
Mikko Perttunen
eb2ee1a28d gpu: host1x: Improve debug disassembly formatting
The host1x driver prints out "disassembly" dumps of the command FIFO
and gather contents on submission timeouts. However, the output has
been quite difficult to read with unnecessary newlines and occasional
missing parentheses.

Fix these problems by using pr_cont to remove unnecessary newlines
and by fixing other small issues.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:52 +02:00
Mikko Perttunen
2316f29fb5 gpu: host1x: Enable gather filter
The gather filter is a feature present on Tegra124 and newer where the
hardware prevents GATHERed command buffers from executing commands
normally reserved for the CDMA pushbuffer which is maintained by the
kernel driver.

This commit enables the gather filter on all supporting hardware.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:52 +02:00
Mikko Perttunen
c3f52220f2 gpu: host1x: Enable Tegra186 syncpoint protection
Since Tegra186 the Host1x hardware allows syncpoints to be assigned to
specific channels, preventing any other channels from incrementing
them.

Enable this feature where available and assign syncpoints to channels
when submitting a job. Syncpoints are currently never unassigned from
channels since that would require extra work and is unnecessary with
the current channel allocation model.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:52 +02:00
Mikko Perttunen
2fb0dceb69 gpu: host1x: Call of_dma_configure() after setting bus
of_dma_configure() now checks the device's bus before configuring it, so
we need to set the device's bus before calling.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:51 +02:00
Mikko Perttunen
6e44b9ad22 drm/tegra: Add Tegra186 support for VIC
Add Tegra186 support for VIC - no changes are required except for new
firmware and compatibility string.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:51 +02:00
Mikko Perttunen
f1b53c4e2c gpu: host1x: Add Tegra186 support
Add support for the implementation of Host1x present on the Tegra186.
The register space has been shuffled around a little bit, requiring
addition of some chip-specific code sections. Tegra186 also adds
several new features, most importantly the hypervisor, but those are
not yet supported with this commit.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:51 +02:00
Mikko Perttunen
d3b3efa170 dt-bindings: host1x: Add Tegra186 information
Add the Tegra186-specific hypervisor-related register range
properties.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:51 +02:00
Thierry Reding
617dd7cc49 gpu: host1x: syncpt: Request syncpoints per client
Rather than request syncpoints for a struct device *, request them for a
struct host1x_client *. This is important because subsequent patches are
going to break the assumption that host1x will always be the parent for
devices requesting a syncpoint. It's also a more natural choice because
host1x clients are really the only ones that will know how to deal with
syncpoints.

Note that host1x clients are always guaranteed to be children of host1x,
regardless of their location in the device tree.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:51 +02:00
Thierry Reding
6a341fdff1 gpu: host1x: Use of_device_get_match_data()
Avoid some boilerplate by calling of_device_get_match_data() instead of
open-coding the equivalent in the driver.

While at it, shuffle around some code to avoid unnecessary local
variables.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:50 +02:00
David S. Miller
ce12f7ddff Merge branch 'mlxsw-extack'
David Ahern says:

====================
mlxsw: spectrum_router: Add extack messages for RIF and VRF overflow

Currently, exceeding the number of VRF instances or the number of router
interfaces either fails with a non-intuitive EBUSY:
    $ ip li set swp1s1.6 vrf vrf-1s1-6 up
    RTNETLINK answers: Device or resource busy

or fails silently (IPv6) since the checks are done in a work queue. This
set adds support for the address validator notifier to spectrum which
allows ext-ack based messages to be returned on failure.

To make that happen the IPv6 version needs to be converted from atomic
to blocking (patch 2), and then support for extack needs to be added
to the notifier (patch 3). Patch 1 reworks the locking in ipv6_add_addr
to work better in the atomic and non-atomic code paths. Patches 4 and 5
add the validator notifier to spectrum and then plumb the extack argument
through spectrum_router.

With this set, VRF overflows fail with:
   $ ip li set swp1s1.6 vrf vrf-1s1-6 up
   Error: spectrum: Exceeded number of supported VRF.

and RIF overflows fail with:
   $ ip addr add dev swp1s2.191 10.12.191.1/24
   Error: spectrum: Exceeded number of supported router interfaces.

v2 -> v3
- fix surround context of patch 4 which was altered by c30f5d012e

v1 -> v2
- fix error path in ipv6_add_addr: reset rt to NULL (Ido comment) and
  add in6_dev_put on ifa once the hold has been done

RFC -> v1
- addressed various comments from Ido
- refactored ipv6_add_addr to allow ifa's to be allocated with
  GFP_KERNEL as requested by DaveM
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:15:08 +01:00
David Ahern
f8fa9b4e6d mlxsw: spectrum_router: Add extack message for RIF and VRF overflow
Add extack argument down to mlxsw_sp_rif_create and mlxsw_sp_vr_create
to set an error message on RIF or VR overflow. Now on overflow of
either resource the user gets an informative message as opposed to
failing with EBUSY.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:15:07 +01:00
David Ahern
89d5dd2efd mlxsw: spectrum: router: Add support for address validator notifier
Add support for inetaddr_validator and inet6addr_validator. The
notifiers provide a means for validating ipv4 and ipv6 addresses
before the addresses are installed and on failure the error
is propagated back to the user.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:15:07 +01:00
David Ahern
de95e04791 net: Add extack to validator_info structs used for address notifier
Add extack to in_validator_info and in6_validator_info. Update the one
user of each, ipvlan, to return an error message for failures.

Only manual configuration of an address is plumbed in the IPv6 code path.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:15:07 +01:00
David Ahern
ff7883ea60 net: ipv6: Make inet6addr_validator a blocking notifier
inet6addr_validator chain was added by commit 3ad7d2468f ("Ipvlan
should return an error when an address is already in use") to allow
address validation before changes are committed and to be able to
fail the address change with an error back to the user. The address
validation is not done for addresses received from router
advertisements.

Handling RAs in softirq context is the only reason for the notifier
chain to be atomic versus blocking. Since the only current user, ipvlan,
of the validator chain ignores softirq context, the notifier can be made
blocking and simply not invoked for softirq path.

The blocking option is needed by spectrum for example to validate
resources for an adding an address to an interface.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:15:07 +01:00
David Ahern
f3d9832e56 ipv6: addrconf: cleanup locking in ipv6_add_addr
ipv6_add_addr is called in process context with rtnl lock held
(e.g., manual config of an address) or during softirq processing
(e.g., autoconf and address from a router advertisement).

Currently, ipv6_add_addr calls rcu_read_lock_bh shortly after entry
and does not call unlock until exit, minus the call around the address
validator notifier. Similarly, addrconf_hash_lock is taken after the
validator notifier and held until exit. This forces the allocation of
inet6_ifaddr to always be atomic.

Refactor ipv6_add_addr as follows:
1. add an input boolean to discriminate the call path (process context
   or softirq). This new flag controls whether the alloc can be done
   with GFP_KERNEL or GFP_ATOMIC.

2. Move the rcu_read_lock_bh and unlock calls only around functions that
   do rcu updates.

3. Remove the in6_dev_hold and put added by 3ad7d2468f ("Ipvlan should
   return an error when an address is already in use."). This was done
   presumably because rcu_read_unlock_bh needs to be called before calling
   the validator. Since rcu_read_lock is not needed before the validator
   runs revert the hold and put added by 3ad7d2468f and only do the
   hold when setting ifp->idev.

4. move duplicate address check and insertion of new address in the global
   address hash into a helper. The helper is called after an ifa is
   allocated and filled in.

This allows the ifa for manually configured addresses to be done with
GFP_KERNEL and reduces the overall amount of time with rcu_read_lock held
and hash table spinlock held.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:15:07 +01:00
David S. Miller
6b1f8edaba Merge branch 's390-next'
Julian Wiedmann says:

====================
s390/net: updates 2017-10-18

please apply some additional robustness fixes and cleanups for 4.15.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:11:05 +01:00
Julian Wiedmann
52c44d2975 s390/qeth: don't dump control cmd twice
A few lines down, qeth_prepare_control_data() makes further changes to
the control cmd buffer, and then also writes a trace entry for it.
So the first entry just pollutes the trace file with intermediate data,
drop it.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:11:05 +01:00
Julian Wiedmann
978759e826 s390/qeth: support GRO flush timer
Switch to napi_complete_done(), and thus enable delayed GRO flushing.
The timeout is configured via /sys/class/net/<if>/gro_flush_timeout.

Default timeout is 0, so no change in behaviour.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:11:05 +01:00
Julian Wiedmann
864c17c3d8 s390/qeth: try harder to get packets from RX buffer
Current code bails out when two subsequent buffer elements hold
insufficient data to contain a qeth_hdr packet descriptor.
This seems reasonable, but it would be legal for quirky hardware to
leave a few elements empty and then present packets in a subsequent
element. These packets would currently be dropped.

So make sure to check all buffer elements, until we hit the LAST_ENTRY
indication.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:11:05 +01:00
Julian Wiedmann
8d68af6af6 s390/qeth: consolidate skb allocation
Move the allocation of SG skbs into the main path. This allows for
a little code sharing, and handling ENOMEM from within one place.

As side effect, L2 SG skbs now get the proper amount of additional
headroom (read: zero) instead of the hard-coded ETH_HLEN.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:11:05 +01:00
Julian Wiedmann
b6f72f9698 s390/qeth: clean up page frag creation
Replace the open-coded skb_add_rx_frag(), and use a fall-through
to remove some duplicated code.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:11:04 +01:00
Julian Wiedmann
9400c53f06 s390/qeth: no VLAN support on OSM
Instead of silently discarding VLAN registration requests on OSM,
just indicate that this card type doesn't support VLAN.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:11:04 +01:00
Julian Wiedmann
857d8ee260 s390/qeth: don't verify device when setting MAC address
There's no reason why l2_set_mac_address() should ever be called for
a netdevice that's not owned by qeth. It's certainly not required for
VLAN devices, which have their own netdev_ops.

Also:
1) we don't do such validation for any of the other netdev_ops routines.
2) the code in question clearly has never been actually exercised;
   it's broken. After determining that the device is not owned
   by qeth, it would still use dev->ml_priv to write a qeth trace entry.

Remove the check, and its helper that walked the global card list.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:11:04 +01:00
Julian Wiedmann
6e6f472d92 s390/qeth: clean up initial MTU determination
1. Drop the support for Token Ring,
2. use the ETH_DATA_LEN macro for the default L2 MTU,
3. handle OSM via the default case (as OSM is L2-only), and
4. document why the L3 MTU is reduced.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:11:04 +01:00
Julian Wiedmann
83cf79a2fe s390/qeth: fix early exit from error path
When the allocation of the addr buffer fails, we need to free
our refcount on the inetdevice before returning.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:11:04 +01:00
Andy Shevchenko
025d0dfcc1 s390/qeth: use kstrtobool() in qeth_bridgeport_hostnotification_store()
The sysfs enabled value is a boolean, so kstrtobool() is a better fit
for parsing the input string since it does the range checking for us.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:11:04 +01:00
Julian Wiedmann
ed2e93efc3 s390/qeth: remove duplicated device matching
With commit "s390/ccwgroup: tie a ccwgroup driver to its ccw driver",
the ccwgroup core now ensures that a qeth group device only consists of
ccw devices which are supported by qeth. Therefore remove qeth's
internal device matching, and use .driver_info to determine the card
type.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:11:04 +01:00
Allen Pais
dbb27af91d s390/drivers: use setup_timer
Use setup_timer function instead of initializing timer with the
function and data fields.

Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:11:04 +01:00
Julian Wiedmann
ce34435641 s390/qeth: rely on kernel for feature recovery
When recovering a device, qeth needs to re-run the IPA commands that
enable all previously active HW features.
Instead of duplicating qeth_set_features(), let netdev_update_features()
recover the missing HW features from dev->wanted_features.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:11:04 +01:00
Or Gerlitz
0843c092ee net/sched: Set the net-device for egress device instance
Currently the netdevice field is not set and the egdev instance
is not functional, fix that.

Fixes: 3f55bdda8df ('net: sched: introduce per-egress action device callbacks')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:09:35 +01:00
David S. Miller
322d95f04a Merge branch 'cxgb4-more-flower-offloads'
Rahul Lakkireddy says:

====================
cxgb4: enable more tc flower offload matches and actions

This patch series enable more matches and actions for TC Flower
Offload support on Chelsio adapters.

Patch 1 enables matching on IP TOS.

Patch 2 enables matching on VLAN TCI.

Patch 3 adds support for action PASS.

Patch 4 adds support for ETH-DMAC rewrite via TC-PEDIT action. Also,
adds a check to assert that vlan/eth-dmac rewrite actions are valid
only in combination with action egress redirect.

Patch 5 introduces SMT ops for adding/removing entries from SMAC Table
in HW in preparation for patch 6.

Patch 6 adds support for ETH-SMAC rewrite via TC-PEDIT action.

Patch 7 introduces fw_filter2_wr to support L3/L4 header rewrites
in preparation for patch 8.

Patch 8 adds support for rewrite on L3/L4 header fields via TC-PEDIT
action. Supported fields for rewrite are:
IPv4 src/dst address, IPv6 src/dst address, TCP/UDP sport/dport.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:09:09 +01:00
Kumar Sanghvi
557ccbf9df cxgb4: add tc flower support for L3/L4 rewrite
Adds support to rewrite L3/L4 fields via TC-PEDIT action.
Supported fields for rewrite are:
IPv4 src/dst address, IPv6 src/dst address, TCP/UDP sport/dport.

Also, process match fields first and then process the action items.

Refactor pedit action validation to separate function to avoid
excessive code indentation.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:06:53 +01:00
Kumar Sanghvi
0ff9099461 cxgb4: introduce fw_filter2_wr to prepare for L3/L4 rewrite support
Update driver to use new fw_filter2_wr in order to support rewrite of
L3/L4 header fields via filters. Query FW_PARAMS_PARAM_DEV_FILTER2_WR
to check whether FW supports this new wr.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:06:53 +01:00
Kumar Sanghvi
202187c34c cxgb4: add tc flower support for ETH-SMAC rewrite
Adds support for ETH-SMAC rewrite via TC-PEDIT action.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:06:53 +01:00
Kumar Sanghvi
3bdb376e69 cxgb4: introduce SMT ops to prepare for SMAC rewrite support
Introduce SMT operations for allocating/removing entries from
SMAC table. Make TCAM filters use the SMT ops whenever SMAC rewrite
is required.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:06:53 +01:00
Kumar Sanghvi
27ece1f357 cxgb4: add tc flower support for ETH-DMAC rewrite
Add support for ETH-DMAC Rewrite via TC-PEDIT action. Also, add
check to assert that vlan/eth-dmac rewrite actions are valid only
in combination with action egress redirect.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:06:52 +01:00