Commit graph

932,869 commits

Author SHA1 Message Date
Andrew Jeffery
2cbfca66ba gpio: Fix loose spelling
Literally.

I expect "lose" was meant here, rather than "loose", though you could feasibly
use a somewhat uncommon definition of "loose" to mean what would be meant by
"lose": "Loose the hounds" for instance, as in "Release the hounds".
Substituting in "value" for "hounds" gives "release the value", and makes some
sense, but futher substituting back to loose gives "loose the value" which
overall just seems a bit anachronistic.

Instead, use modern, pragmatic English and save a character.

Cc: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-20 09:37:32 +02:00
David S. Miller
3732053731 wireless-drivers-next patches for 4.15
The first pull request for 4.15, unusually late this time but still
 relatively small. Also includes merge from wireless-drivers to fix
 conflicts in iwlwifi.
 
 Major changes:
 
 rsi
 
 * add P2P mode support
 
 * sdio suspend and resume support
 
 iwlwifi
 
 * A fix and an addition for PCI devices for the A000 family
 
 * Dump PCI registers when an error occurs, to make it easier to debug
 
 rtlwifi
 
 * add support for 64 bit DMA, enabled with a module parameter
 
 * add module parameter to enable ASPM
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJZ5x32AAoJEG4XJFUm622b22EIAKmIlD1tAXxK9YAtYE5AnD5A
 QpklYuVJA4XFtpN9UKXP/KCGTRnflW6i4RQ3dt6WKNULkL8RMAjwDijxXrFz8YXw
 uB1Aw+Rbmx8eSrWKTgBCLlfU4J3j8jj5gSc7rzYeG7DnMFVShRCxRChiR09GhY4n
 gXX3p4+migW128EyQ4KYYFGxipS+5/0igsSwqE6UIyxDuhINjCS9MipwXmv2uG+G
 eYOSlwPE+LI8rObqlaJKVgam77srQqZLnPnima+bKAYXiQOPxPDBLwGP1qjo38Wa
 pHKDG//OPMOjyUccl5axulnvLPTjyng9jYNpzJlLLz9+M29SudtHI7YQQHhBj5M=
 =bApF
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-next-for-davem-2017-10-18' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.15

The first pull request for 4.15, unusually late this time but still
relatively small. Also includes merge from wireless-drivers to fix
conflicts in iwlwifi.

Major changes:

rsi

* add P2P mode support

* sdio suspend and resume support

iwlwifi

* A fix and an addition for PCI devices for the A000 family

* Dump PCI registers when an error occurs, to make it easier to debug

rtlwifi

* add support for 64 bit DMA, enabled with a module parameter

* add module parameter to enable ASPM
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 08:37:28 +01:00
Arnd Bergmann
d18b4b35e3 net: sched: cls_u32: use hash_ptr() for tc_u_hash
After the change to the tp hash, we now get a build warning
on 32-bit architectures:

net/sched/cls_u32.c: In function 'tc_u_hash':
net/sched/cls_u32.c:338:17: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
  return hash_64((u64) tp->chain->block, U32_HASH_SHIFT);

Using hash_ptr() instead of hash_64() lets us drop the cast
and fixes the warning while still resulting in the same hash
value.

Fixes: 7fa9d974f3 ("net: sched: cls_u32: use block instead of q in tc_u_common")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 08:36:00 +01:00
Dan Carpenter
c75e427d93 tipc: checking for NULL instead of IS_ERR()
The tipc_alloc_conn() function never returns NULL, it returns error
pointers, so I have fixed the check.

Fixes: 14c04493cb ("tipc: add ability to order and receive topology events in driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 08:34:00 +01:00
David S. Miller
6575f35415 Merge branch 'sh_eth-fallback-compat-strings'
Simon Horman says:

====================
net: sh_eth: add R-Car Gen[12] fallback compatibility strings

Add fallback compatibility strings for R-Car Gen 1 and 2.

In the case of Renesas R-Car hardware we know that there are generations of
SoCs, f.e. Gen 1 and 2. But beyond that its not clear what the relationship
between IP blocks might be. For example, I believe that r8a7790 is older
than r8a7791 but that doesn't imply that the latter is a descendant of the
former or vice versa.

We can, however, by examining the documentation and behaviour of the
hardware at run-time observe that the current driver implementation appears
to be compatible with the IP blocks on SoCs within a given generation.

For the above reasons and convenience when enabling new SoCs a
per-generation fallback compatibility string scheme is being adopted for
drivers for Renesas SoCs.

Changes since v1:
* Correct typos in changelogs
* Consistently use tabs for indentation in bindings document
* Enhance readability of description of bindings usage
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 08:32:49 +01:00
Simon Horman
b4804e0c71 net: sh_eth: implement R-Car Gen[12] fallback compatibility strings
Implement fallback compatibility strings for R-Car Gen 1 and 2.

In the case of Renesas R-Car hardware we know that there are generations of
SoCs, f.e. Gen 1 and 2. But beyond that its not clear what the relationship
between IP blocks might be. For example, I believe that r8a7790 is older
than r8a7791 but that doesn't imply that the latter is a descendant of the
former or vice versa.

We can, however, by examining the documentation and behaviour of the
hardware at run-time observe that the current driver implementation appears
to be compatible with the IP blocks on SoCs within a given generation.

For the above reasons and convenience when enabling new SoCs a
per-generation fallback compatibility string scheme is being adopted for
drivers for Renesas SoCs.

Note that R-Car Gen2 and RZ/G1 have many compatible IP blocks.  The
approach that has been consistently taken for other IP blocks is to name
common code, compatibility strings and so on after R-Car Gen2.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 08:32:24 +01:00
Simon Horman
6c4b2f7e67 net: sh_eth: rename name structures as rcar_gen[12]_*
Rename structures describing R-Car SoCs as rcar_gen[12]_*
rather than r8a77[79]x_*. This seems a little easier on the
eyes. And will make things slightly cleaner in a follow-up
patch that adds fallback-compatibility strings for these SoCs.

Note that R-Car Gen2 and RZ/G1 have many compatible IP blocks.  The
approach that has been consistently taken for other IP blocks is to name
common code, compatibility strings and so on after R-Car Gen2.

Also rename sh_eth_set_rate_r8a777x as sh_eth_set_rate_rcar as
it it is used by the R-Car generations supported by the driver.

This patch should have no run-time effect and
is compile-tested only.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 08:32:24 +01:00
Simon Horman
87d9fa6470 dt-bindings: net: sh_eth: add R-Car Gen[12] fallback compatibility strings
Add fallback compatibility strings for R-Car Gen 1 and 2.

In the case of Renesas R-Car hardware we know that there are generations of
SoCs, f.e. Gen 1 and 2. But beyond that its not clear what the relationship
between IP blocks might be. For example, I believe that r8a7790 is older
than r8a7791 but that doesn't imply that the latter is a descendant of the
former or vice versa.

We can, however, by examining the documentation and behaviour of the
hardware at run-time observe that the current driver implementation appears
to be compatible with the IP blocks on SoCs within a given generation.

For the above reasons and convenience when enabling new SoCs a
per-generation fallback compatibility string scheme is being adopted for
drivers for Renesas SoCs.

Note that R-Car Gen2 and RZ/G1 have many compatible IP blocks.  The
approach that has been consistently taken for other IP blocks is to name
common code, compatibility strings and so on after R-Car Gen2.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 08:32:24 +01:00
Ingo Molnar
275d34b825 perf/urgent fixes:
- Fix crash in perf_hpp__reset_output_field() (Jiri Olsa)
 
 - Fix eBPF file/vendor events ambiguity in event specification (Jiri Olsa)
 
 - Fix closing evsel fd in 'perf stat' (Jin Yao)
 
 - Make perf test shell trace+probe_libc_inet_pton.sh pass in Debian/Ubuntu (Li Zhijian)
 
 - Fix 'perf buildid-list --with-hits' crash when processing PERF_RECORD_NAMESPACE (Namhyung Kim)
 
 - Fix documentation for a inexistent option 'perf record -l' (Taeung Song)
 
 - Add long time reviewers to MAINTAINERS (Arnaldo Carvalho de Melo)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEELb9bqkb7Te0zijNb1lAW81NSqkAFAlno4cEACgkQ1lAW81NS
 qkBAlhAAk9LUUvFLLB2R2U33qoLskEL+r88wTdTPQSNf8caCr01m/ae+WiB69MpX
 80WaHzGPXue0NBuWQhaND8/R0muKvDgCDWKSL3yic2Qk2hRe2g1a6I6cjp01hQix
 ajfNu15w2p3awKuXi6xOBRjQM7MiW0zioEURNEuyKlBOKC7VivMHOUJAyZSOkAce
 uFNqfYwS8EPM3FobV+iL7P0R86JdaGc0VZ172gqs9uLgdROtsXms3bbbj/ixTIKG
 Uwl34SUJMhpgk4q1lMJBtps3Ntjtop/0TWJdhhEWRxEQqti8q2JnfXfQHp9miLPu
 k85IH4x3Kxq7ZxNzCqlKFGpLsTq3NQEiT6QDYIjBYcVz7HGgYLzrLAcsIO5+Sh2P
 3iFwALfUGfgTIQoKBz5fVClDDnbCf1GAuZUOUetJSsGzU3dj15R6oMKRZWV12qFr
 rNYWQ+voOV38mCvcGNBCZ8quZelixrLdOACU8mzP0ePWElGnuW4Q7ecIHZuluET+
 9r2pKrPH8Ze3/0w+0CkdxXLB6ZfFS4cxCLR2j0UZxgO/vQKODbwWS6Vak+b6xM50
 TQLS224PIJL0EVC/WTReVkWli3ksTTzcr/E/siv778rD3xhZfEdlUZGuBDZTj3pZ
 Hr0jQsVTWhQNVt1t+xOpRHsL7JZIXNWIT/PSJZAKU9godtoNqp0=
 =nqkB
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-for-mingo-4.14-20171019' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

- Fix crash in perf_hpp__reset_output_field() (Jiri Olsa)

- Fix eBPF file/vendor events ambiguity in event specification (Jiri Olsa)

- Fix closing evsel fd in 'perf stat' (Jin Yao)

- Make perf test shell trace+probe_libc_inet_pton.sh pass in Debian/Ubuntu (Li Zhijian)

- Fix 'perf buildid-list --with-hits' crash when processing PERF_RECORD_NAMESPACE (Namhyung Kim)

- Fix documentation for an inexistent option 'perf record -l' (Taeung Song)

- Add long time reviewers to MAINTAINERS (Arnaldo Carvalho de Melo)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-20 09:14:06 +02:00
Stefan Roese
c5709d3769 dmaengine: altera: Use IRQ-safe spinlock calls in the error paths as well
The patch edf10919 [dmaengine: altera: fix spinlock usage] missed to
change 2 occurrences of spin_unlock_bh() to spin_unlock_irqrestore().
This patch fixes this by moving to the IRQ-safe call in the error
paths as well.

Fixes: edf10919 (dmaengine: altera: fix spinlock usage)
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Sylvain Lesne <lesne@alse-fr.com>
[add fixes tag and fix typo in log]
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-20 11:51:10 +05:30
Alexander Kochetkov
e588710311 dmaengine: pl330: fix descriptor allocation fail
If two concurrent threads call pl330_get_desc() when DMAC descriptor
pool is empty it is possible that allocation for one of threads will fail
with message:

kernel: dma-pl330 20078000.dma-controller: pl330_get_desc:2469 ALERT!

Here how that can happen. Thread A calls pl330_get_desc() to get
descriptor. If DMAC descriptor pool is empty pl330_get_desc() allocates
new descriptor on shared pool using add_desc() and then get newly
allocated descriptor using pluck_desc(). At the same time thread B calls
pluck_desc() and take newly allocated descriptor. In that case descriptor
allocation for thread A will fail.

Using on-stack pool for new descriptor allow avoid the issue described.
The patch modify pl330_get_desc() to use on-stack pool for allocation
new descriptors.

Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-20 11:46:45 +05:30
Hiroyuki Yokoyama
847449f23d dmaengine: rcar-dmac: use TCRB instead of TCR for residue
SYS/RT/Audio DMAC includes independent data buffers for reading
and writing. Therefore, the read transfer counter and write transfer
counter have different values.
TCR indicates read counter, and TCRB indicates write counter.
The relationship is like below.

        TCR       TCRB
[SOURCE] -> [DMAC] -> [SINK]

In the MEM_TO_DEV direction, what really matters is how much data has
been written to the device. If the DMA is interrupted between read and
write, then, the data doesn't end up in the destination, so shouldn't
be counted. TCRB is thus the register we should use in this cases.

In the DEV_TO_MEM direction, the situation is more complex. Both the
read and write side are important. What matters from a data consumer
point of view is how much data has been written to memory.
On the other hand, if the transfer is interrupted between read and
write, we'll end up losing data. It can also be important to report.

In the MEM_TO_MEM direction, what matters is of course how much data
has been written to memory from data consumer point of view.
Here, because read and write have independent data buffers, it will
take a while for TCR and TCRB to become equal. Thus we should check
TCRB in this case, too.

Thus, all cases we should check TCRB instead of TCR.

Without this patch, Sound Capture has noise after PluseAudio support
(= 07b7acb51d ("ASoC: rsnd: update pointer more accurate")), because
the recorder will use wrong residue counter which indicates transferred
from sound device, but in reality the data was not yet put to memory
and recorder will record it.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
[Kuninori: added detail information in log]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-20 11:43:32 +05:30
Dave Airlie
19f470b2e4 Merge tag 'drm-amdkfd-next-2017-10-18' of git://people.freedesktop.org/~gabbayo/linux into drm-next
This is the amdkfd pull request for 4.15 merge window.
The patches here are relevant only for Kaveri and Carrizo. Still no dGPU patches.

The main goal is to continue alignment with the internal AMD development tree.

The following is a summary of the changes:
- Improvements and fixes to suspend/resume code
- Improvements and fixes to process termination code
- Cleanups in the queue unmapping functionality
- Reuse code from amdgpu

* tag 'drm-amdkfd-next-2017-10-18' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: Improve multiple SDMA queues support per process
  drm/amdkfd: Limit queue number per process and device to 127
  drm/amdkfd: Clean up process queue management
  drm/amdkfd: Compress unnecessary function parameters
  drm/amdkfd: Improve process termination handling
  drm/amdkfd: Avoid submitting an unnecessary packet to HWS
  drm/amdkfd: Fix MQD updates
  drm/amdkfd: Pass filter params to unmap_queues_cpsch
  drm/amdkfd: move locking outside of unmap_queues_cpsch
  drm/amdkfd: Avoid name confusion involved in queue unmapping
  drm/amdkfd: Drop _nocpsch suffix from shared functions
  drm/amdkfd: Reuse CHIP_* from amdgpu v2
  drm/amdkfd: Use VMID bitmap from KGD v2
  drm/amdkfd: Adjust dequeue latencies and timeouts
  drm/amdkfd: Rectify the jiffies calculation error with milliseconds v2
  drm/amdkfd: Fix suspend/resume issue on Carrizo v2
  drm/amdkfd: Reorganize kfd resume code
2017-10-20 15:54:44 +10:00
NeilBrown
4ded097bed constify more dcache.h inlined helpers.
const struct pointers in commit f0d3b3ded9 ("constify dcache.c
inlined helpers where possible").
This patch allows 'const' in a couple that were added since then.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-10-20 01:33:01 -04:00
Richard Guy Briggs
dbbbe1105e capabilities: audit log other surprising conditions
The existing condition tested for process effective capabilities set by
file attributes but intended to ignore the change if the result was
unsurprisingly an effective full set in the case root is special with a
setuid root executable file and we are root.

Stated again:
- When you execute a setuid root application, it is no surprise and
  expected that it got all capabilities, so we do not want capabilities
  recorded.
        if (pE_grew && !(pE_fullset && (eff_root || real_root) && root_priveleged) )

Now make sure we cover other cases:
- If something prevented a setuid root app getting all capabilities and
  it wound up with one capability only, then it is a surprise and should
  be logged.  When it is a setuid root file, we only want capabilities
  when the process does not get full capabilities..
        root_priveleged && setuid_root && !pE_fullset

- Similarly if a non-setuid program does pick up capabilities due to
  file system based capabilities, then we want to know what capabilities
  were picked up.  When it has file system based capabilities we want
  the capabilities.
        !is_setuid && (has_fcap && pP_gained)

- If it is a non-setuid file and it gets ambient capabilities, we want
  the capabilities.
        !is_setuid && pA_gained

- These last two are combined into one due to the common first parameter.

Related: https://github.com/linux-audit/audit-kernel/issues/16

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-20 15:22:46 +11:00
Richard Guy Briggs
588fb2c7e2 capabilities: fix logic for effective root or real root
Now that the logic is inverted, it is much easier to see that both real
root and effective root conditions had to be met to avoid printing the
BPRM_FCAPS record with audit syscalls.  This meant that any setuid root
applications would print a full BPRM_FCAPS record when it wasn't
necessary, cluttering the event output, since the SYSCALL and PATH
records indicated the presence of the setuid bit and effective root user
id.

Require only one of effective root or real root to avoid printing the
unnecessary record.

Ref: commit 3fc689e96c ("Add audit_log_bprm_fcaps/AUDIT_BPRM_FCAPS")
See: https://github.com/linux-audit/audit-kernel/issues/16

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-20 15:22:45 +11:00
Richard Guy Briggs
c0d1adefe0 capabilities: invert logic for clarity
The way the logic was presented, it was awkward to read and verify.
Invert the logic using DeMorgan's Law to be more easily able to read and
understand.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Okay-ished-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-20 15:22:45 +11:00
Richard Guy Briggs
02ebbaf48c capabilities: remove a layer of conditional logic
Remove a layer of conditional logic to make the use of conditions
easier to read and analyse.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Okay-ished-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-20 15:22:45 +11:00
Richard Guy Briggs
9fbc2c7964 capabilities: move audit log decision to function
Move the audit log decision logic to its own function to isolate the
complexity in one place.

Suggested-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Okay-ished-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-20 15:22:44 +11:00
Richard Guy Briggs
81a6a01299 capabilities: use intuitive names for id changes
Introduce a number of inlines to make the use of the negation of
uid_eq() easier to read and analyse.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Okay-ished-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-20 15:22:44 +11:00
Richard Guy Briggs
9304b46c91 capabilities: use root_priveleged inline to clarify logic
Introduce inline root_privileged() to make use of SECURE_NONROOT
easier to read.

Suggested-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Okay-ished-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-20 15:22:44 +11:00
Richard Guy Briggs
fc7eadf768 capabilities: rename has_cap to has_fcap
Rename has_cap to has_fcap to clarify it applies to file capabilities
since the entire source file is about capabilities.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Okay-ished-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-20 15:22:44 +11:00
Richard Guy Briggs
4c7e715fc8 capabilities: intuitive names for cap gain status
Introduce macros cap_gained, cap_grew, cap_full to make the use of the
negation of is_subset() easier to read and analyse.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Okay-ished-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-20 15:22:43 +11:00
Richard Guy Briggs
db1a8922cf capabilities: factor out cap_bprm_set_creds privileged root
Factor out the case of privileged root from the function
cap_bprm_set_creds() to make the latter easier to read and analyse.

Suggested-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Okay-ished-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-20 15:22:43 +11:00
Linus Torvalds
ce43f4fd6f Power management fix for v4.14-rc6
This reverts a problematic commit modifying the turbostat
 utility that went in during the 4.13 cycle (Len Brown).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZ6Sp6AAoJEILEb/54YlRxt+4QAIZUZUiOgnm+xnTt/jO+RFqn
 QhemEUf5pJFvt0HGdIOaA4VzicyAaSnA1+QoSiHJhIk8itsVCnI9COpfb0BwYvnU
 B26gtT0+H+pvu2PVSVrihZZ27S5zJfIZ+3bfSqMUB/uvvIkRVD0g7OMBNPPttGVz
 iF1HRWOgK4w88zy2MNyvdmqagOwAdnptMB3RCasAIh4HlOkdAeJ0qGsru0UKxKd1
 mZGp2WxHE66cTNAheX/ONyK0N1X+4WiCcxuUTGa0O3YyT6Ll3FbWbxsh7GcmJ7aa
 +UpOXDPKBzsZzjHUB+a8rECChbtrzEAJ1AJc2QB0ZPw2Id1Fo6rxgkMCs+YoNDiz
 mBqhGAF9VcD9az9DqbMEHwkWHiOTEjgsUwKAVFEYV23nm5sTGIBVc5W/0StG8Kz7
 IQeeapN9kqc2ty+lD8cCfC+NU1EVn3Ca5s85vnWnK3bmmolHEVpzdUzLc9vYrFnP
 JKkNA2n3/9UvC3DRDr7ykD0wro77yA/mcjRLHmMxleLo7YEKZF1aPmsiOlgJiP5K
 LTnkpnhUSIz7W/9v1Gh2pYpiwppJBgp5RXZGXGY/vTA42t0HZeZquGgNub5b0ys7
 +JPrb5jlgYmg4DXXWT2htq8cjTisxJI+6uAtD7oULondtMISZCWtm0CMxgksmATA
 567h1DJHd0zvO7r7mlRa
 =i876
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fix from Rafael Wysocki:
 "This reverts a problematic commit modifying the turbostat utility that
  went in during the 4.13 cycle (Len Brown)"

* tag 'pm-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "tools/power turbostat: stop migrating, unless '-m'"
2017-10-19 22:49:21 -04:00
Paul E. McKenney
27fdb35fe9 doc: Fix various RCU docbook comment-header problems
Because many of RCU's files have not been included into docbook, a
number of errors have accumulated.  This commit fixes them.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-19 22:26:11 -04:00
Paul E. McKenney
533966c8ad doc: Fix RCU's docbook options
Commit 764f80798b ("doc: Add RCU files to docbook-generation files")
added :external: options for RCU source files in the file
Documentation/core-api/kernel-api.rst.  However, this now means nothing,
so this commit removes them.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-19 22:26:11 -04:00
Mathieu Desnoyers
a961e40917 membarrier: Provide register expedited private command
This introduces a "register private expedited" membarrier command which
allows eventual removal of important memory barrier constraints on the
scheduler fast-paths. It changes how the "private expedited" membarrier
command (new to 4.14) is used from user-space.

This new command allows processes to register their intent to use the
private expedited command.  This affects how the expedited private
command introduced in 4.14-rc is meant to be used, and should be merged
before 4.14 final.

Processes are now required to register before using
MEMBARRIER_CMD_PRIVATE_EXPEDITED, otherwise that command returns EPERM.

This fixes a problem that arose when designing requested extensions to
sys_membarrier() to allow JITs to efficiently flush old code from
instruction caches.  Several potential algorithms are much less painful
if the user register intent to use this functionality early on, for
example, before the process spawns the second thread.  Registering at
this time removes the need to interrupt each and every thread in that
process at the first expedited sys_membarrier() system call.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-19 22:13:40 -04:00
Dave Airlie
282dc8322a Merge tag 'drm-intel-next-2017-10-12' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Last batch of drm/i915 features for v4.15:

- transparent huge pages support (Matthew)
- uapi: I915_PARAM_HAS_SCHEDULER into a capability bitmask (Chris)
- execlists: preemption (Chris)
- scheduler: user defined priorities (Chris)
- execlists optimization (Michał)
- plenty of display fixes (Imre)
- has_ipc fix (Rodrigo)
- platform features definition refactoring (Rodrigo)
- legacy cursor update fix (Maarten)
- fix vblank waits for cursor updates (Maarten)
- reprogram dmc firmware on resume, dmc state fix (Imre)
- remove use_mmio_flip module parameter (Maarten)
- wa fixes (Oscar)
- huc/guc firmware refacoring (Sagar, Michal)
- push encoder specific code to encoder hooks (Jani)
- DP MST fixes (Dhinakaran)
- eDP power sequencing fixes (Manasi)
- selftest updates (Chris, Matthew)
- mmu notifier cpu hotplug deadlock fix (Daniel)
- more VBT parser refactoring (Jani)
- max pipe refactoring (Mika Kahola)
- rc6/rps refactoring and separation (Sagar)
- userptr lockdep fix (Chris)
- tracepoint fixes and defunct tracepoint removal (Chris)
- use rcu instead of abusing stop_machine (Daniel)
- plenty of other fixes all around (Everyone)

* tag 'drm-intel-next-2017-10-12' of git://anongit.freedesktop.org/drm/drm-intel: (145 commits)
  drm/i915: Update DRIVER_DATE to 20171012
  drm/i915: Simplify intel_sanitize_enable_ppgtt
  drm/i915/userptr: Drop struct_mutex before cleanup
  drm/i915/dp: limit sink rates based on rate
  drm/i915/dp: centralize max source rate conditions more
  drm/i915: Allow PCH platforms fall back to BIOS LVDS mode
  drm/i915: Reuse normal state readout for LVDS/DVO fixed mode
  drm/i915: Use rcu instead of stop_machine in set_wedged
  drm/i915: Introduce separate status variable for RC6 and LLC ring frequency setup
  drm/i915: Create generic functions to control RC6, RPS
  drm/i915: Create generic function to setup LLC ring frequency table
  drm/i915: Rename intel_enable_rc6 to intel_rc6_enabled
  drm/i915: Name structure in dev_priv that contains RPS/RC6 state as "gt_pm"
  drm/i915: Move rps.hw_lock to dev_priv and s/hw_lock/pcu_lock
  drm/i915: Name i915_runtime_pm structure in dev_priv as "runtime_pm"
  drm/i915: Separate RPS and RC6 handling for CHV
  drm/i915: Separate RPS and RC6 handling for VLV
  drm/i915: Separate RPS and RC6 handling for BDW
  drm/i915: Remove superfluous IS_BDW checks and non-BDW changes from gen8_enable_rps
  drm/i915: Separate RPS and RC6 handling for gen6+
  ...
2017-10-20 10:56:10 +10:00
Dave Airlie
6585d4274b Merge branch 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux into drm-next
Last set of features for 4.15.  Highlights:
- Add a bo flag to allow buffers to opt out of implicit sync
- Add ctx priority setting interface
- Lots more powerplay cleanups
- Start to plumb through vram lost infrastructure for gpu reset
- ttm support for huge pages
- misc cleanups and bug fixes

* 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: (73 commits)
  drm/amd/powerplay: Place the constant on the right side of the test
  drm/amd/powerplay: Remove useless variable
  drm/amd/powerplay: Don't cast kzalloc() return value
  drm/amdgpu: allow GTT overcommit during bind
  drm/amdgpu: linear validate first then bind to GART
  drm/amd/pp: Fix overflow when setup decf/pix/disp dpm table.
  drm/amd/pp: thermal control not enabled on vega10.
  drm/amdgpu: busywait KIQ register accessing (v4)
  drm/amdgpu: report more amdgpu_fence_info
  drm/amdgpu:don't check soft_reset for sriov
  drm/amdgpu:fix duplicated setting job's vram_lost
  drm/amdgpu:reduce wb to 512 slot
  drm/amdgpu: fix regresstion on SR-IOV gpu reset failed
  drm/amd/powerplay: Tidy up cz_dpm_powerup_vce()
  drm/amd/powerplay: Tidy up cz_dpm_powerdown_vce()
  drm/amd/powerplay: Tidy up cz_dpm_update_vce_dpm()
  drm/amd/powerplay: Tidy up cz_dpm_update_uvd_dpm()
  drm/amd/powerplay: Tidy up cz_dpm_powerup_uvd()
  drm/amd/powerplay: Tidy up cz_dpm_powerdown_uvd()
  drm/amd/powerplay: Tidy up cz_start_dpm()
  ...
2017-10-20 10:47:19 +10:00
Dmitry Torokhov
ea04efee76 Input: ims-psu - check if CDC union descriptor is sane
Before trying to use CDC union descriptor, try to validate whether that it
is sane by checking that intf->altsetting->extra is big enough and that
descriptor bLength is not too big and not too small.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 17:20:06 -07:00
Simon Budig
aed5d0ee77 Input: edt-ft5x06 - implement support for the EDT-M12 series
This adds support for the EDT M12 series of touchscreens.

Signed-off-by: Simon Budig <simon.budig@kernelconcepts.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 17:17:47 -07:00
Simon Budig
169110c364 Input: edt-ft5x06 - make distinction between m06/m09/generic more clear
Since the driver also is useful for some non-EDT touchscreens based on
the focaltec chips introduce the concept of a "generic" focaltec based
touch.

Use a better heuristics for model detection and be more specific in the
source.

Signed-off-by: Simon Budig <simon.budig@kernelconcepts.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 17:17:46 -07:00
Michael Ellerman
cba6ac4869 powerpc: Add PPC_FEATURE2_HTM_NO_SUSPEND
Some CPUs can operate in a mode where TM (Transactional Memory) is
enabled but the suspended state of TM is disabled. In this mode
tsuspend does not enter suspended state, instead the transaction is
aborted. Similarly any other event that would lead to suspended state
instead aborts the transaction.

There is also an ABI change, in that in this mode processes are not
allowed to sigreturn with an MSR that would lead to suspended state,
Linux will instead return an error to the sigreturn syscall.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-20 11:10:58 +11:00
Cyril Bur
07fd1761e1 powerpc/tm: Add commandline option to disable hardware transactional memory
Currently the kernel relies on firmware to inform it whether or not the
CPU supports HTM and as long as the kernel was built with
CONFIG_PPC_TRANSACTIONAL_MEM=y then it will allow userspace to make
use of the facility.

There may be situations where it would be advantageous for the kernel
to not allow userspace to use HTM, currently the only way to achieve
this is to recompile the kernel with CONFIG_PPC_TRANSACTIONAL_MEM=n.

This patch adds a simple commandline option so that HTM can be
disabled at boot time.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
[mpe: Simplify to a bool, move to prom.c, put doco in the right place.
 Always disable, regardless of initial state, to avoid user confusion.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-20 11:10:56 +11:00
Michael Ellerman
ddd46ed2e6 Merge branch 'topic/ppc-kvm' into next
Bring in some KVM commits we need (the TM one in particular).
2017-10-20 11:10:30 +11:00
Michael Ellerman
2a3d6553cb KVM: PPC: Tie KVM_CAP_PPC_HTM to the user-visible TM feature
Currently we use CPU_FTR_TM to decide if the CPU/kernel can support
TM (Transactional Memory), and if it's true we advertise that to
Qemu (or similar) via KVM_CAP_PPC_HTM.

PPC_FEATURE2_HTM is the user-visible feature bit, which indicates that
the CPU and kernel can support TM. Currently CPU_FTR_TM and
PPC_FEATURE2_HTM always have the same value, either true or false, so
using the former for KVM_CAP_PPC_HTM is correct.

However some Power9 CPUs can operate in a mode where TM is enabled but
TM suspended state is disabled. In this mode CPU_FTR_TM is true, but
PPC_FEATURE2_HTM is false. Instead a different PPC_FEATURE2 bit is
set, to indicate that this different mode of TM is available.

It is not safe to let guests use TM as-is, when the CPU is in this
mode. So to prevent that from happening, use PPC_FEATURE2_HTM to
determine the value of KVM_CAP_PPC_HTM.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-20 11:09:26 +11:00
Linus Walleij
adb77b3e51 Input: gpio_mouse - add device tree probing
This makes the GPIO mouse probe nicely from the device tree if found in a
tree. As the driver uses device properties it can easily be amended to also
probe from ACPI devices.

Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 17:08:46 -07:00
Linus Walleij
836bd41983 Input: gpio_mouse - convert to use GPIO descriptors
This converts the GPIO mouse to use descriptors and fwnode properties. The
polarity settings go out the window since GPIO descriptor already know
about polarity so this should be configured in device tree or ACPI or
similar.

Set scanning interval by default to 50ms if not found as a property on the
device.

Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 17:08:46 -07:00
Linus Walleij
055f624e1e Input: gpio_mouse - add DT bindings
This adds DT bindings for simple mice attached to GPIO lines. As the
properties are very general and pertains to all mice I can think of, we use
very generic names for the 4-7 GPIO lines, "up", "down" etc.

Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 17:08:45 -07:00
Linus Walleij
34cf5a1cad Input: gpio_mouse - rename platform data variables
Use more appropriate names for the "platform data" which is now just a
simple state container for the GPIO mouse.

Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 17:08:44 -07:00
Linus Walleij
c5053e695d Input: gpio_mouse - kill off platform data
This is not used much: git grep  gpio_mouse_platform_data shows
that absolutely nothing in the kernel defines this platform
data.

It could be argued that the driver should be deleted. But that
is a bit harsh I think since it seems generally useful. So
this patch starts a series which repurposes it to be used with
hardware nodes from device tree or ACPI.

This first patch simply localize the platform data header and
allocates a dummy platform data.

Yes: this patch leaves the driver in a pretty useless state,
but since nothing is instantiating this driver, it doesn't
make it more useless than it already is. Later patches makes
use of the driver.

Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 17:08:37 -07:00
Ross Zwisler
0a3ff78699 dev/dax: fix uninitialized variable build warning
Fix this build warning:

warning: 'phys' may be used uninitialized in this function
[-Wuninitialized]

As reported here:

https://lkml.org/lkml/2017/10/16/152
http://kisskb.ellerman.id.au/kisskb/buildresult/13181373/log/

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-10-19 17:02:18 -07:00
Ross Zwisler
7fc9be3c13 MAINTAINERS: Add entry for device DAX
And update the entry for filesystem DAX to differentiate them.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-10-19 17:01:34 -07:00
Roderick Colenbrander
20ac95d52a Input: joydev - blacklist ds3/ds4/udraw motion sensors
Introduce a device table used for blacklisting devices. We currently
blacklist the motion sensor subdevice of THQ Udraw and Sony ds3/ds4.

Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
[dtor: siwtched to blacklist built on input_device_id and using
input_match_device_id()]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 16:55:39 -07:00
Dmitry Torokhov
8724ecb072 Input: allow matching device IDs on property bits
Let's allow matching input devices on their property bits, both in-kernel
and when generating module aliases.

Tested-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 16:54:49 -07:00
Dmitry Torokhov
55dfce873d Input: factor out and export input_device_id matching code
Factor out and export input_match_device_id() so that modules may use it.
It will be needed by joydev to blacklist accelerometers in composite
devices.

Tested-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 16:53:34 -07:00
Paul Cercueil
9b5db7aab4 Input: goodix - poll the 'buffer status' bit before reading data
The Goodix panel triggers an interrupt on touch events. However, its
registers will contain the valid values a short time after the
interrupt, and not when it's raised. At that moment, the 'buffer status'
bit is set.

Previously, if the 'buffer status' bit was not set when the registers
were read, the data was discarded and no input event was emitted,
causing "finger down" or "finger up" events to be missed sometimes.

This went unnoticed until v4.9, as the DesignWare I2C driver commonly
used with this driver had enough latency for that bug to never trigger
until commit 2702ea7dbe ("i2c: designware: wait for disable/enable only
if necessary").

Now, in the IRQ handler we will poll (with a timeout) the 'buffer status'
bit and process the data of the panel as soon as this bit gets set.

Note that the Goodix panel will send a few spurious interrupts after the
'finger up' event, in which the 'buffer status' bit will never be set.

Cc: Bastien Nocera <hadess@hadess.net>
Cc: russianneuromancer@ya.ru
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
[hdegoede@redhat.com: Change poll loop to use jiffies,
                      add comment about typical poll time]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[dtor: rearranged control flow a bit to avoid explicit goto and double
check]
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 16:50:39 -07:00
Hans de Goede
481c209fa0 Input: axp20x-pek - fix module not auto-loading for axp221 pek
Now that we have a platform_device_id table and multiple supported ids
we should be using MODULE_DEVICE_TABLE instead of MODULE_ALIAS.

This fixes a regression on Bay and Cherry Trail devices, where the power
button is now enumerated as an "axp221-pek" and it was impossible to
wakeup these devices from suspend since the module did not load.

Fixes: c3cc94470b ("Input: axp20x-pek - add support for AXP221 PEK")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 16:50:28 -07:00
Damien Riegel
8f75bc3377 Input: tca8418 - enable interrupt after it has been requested
Currently, enabling keypad interrupts is one of the first operations
done on the keypad, even before the interrupt is requested, so there is
a small time window where the keypad can fire interrupts but the driver
is not yet ready to handle them. It's fine for level interrupts because
they will be handled anyway, but not so much for edge ones.

This commit modifies and moves the function in charge of configuring the
keypad. Enabling interrupts is now the last thing done on the keypad,
and after the interrupt has been requested by the driver.

Writing to the config register was also used to determine if the device
was indeed present on the bus or not, this has been replaced by reading
the lock/event count register to keep the same functionality.

Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 16:50:20 -07:00