Commit graph

932,869 commits

Author SHA1 Message Date
Dongdong Liu
7c950b9e53 PCI/portdrv: Add #defines for AER and DPC Interrupt Message Number masks
In the AER case, the mask isn't strictly necessary because there are no
higher-order bits above the Interrupt Message Number, but using a #define
will make it possible to grep for it.

Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-10-19 18:02:01 -05:00
Arnd Bergmann
092283190a Device tree changes for omaps for v4.15 merge window to improve
support for omap35xx-evm, am34xx-epos-evm and dra7:
 
 - A series of changes to fix support for omap35xx-evm
 
 - A series of changes to add earlycon support for n8x0, pandaboard
   and omap5 boards
 
 - A series of changes for am43xx-epos-evm pinctrl modes for default
   and sleep states
 
 - A series of changes to correct pbias regulator voltage for dra7
   from 3V to 3.3V
 
 - Use microchip compatible instead of deprecated mcp compatible for
   mcp23017
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlng604RHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXPLCQ//cPpaHUB7wW0jKLVX3J0cUQt5lWjNv/16
 3W/ap6TPIwNmkdeF8YySt22exHNXtgPjd6XuIK5MPfx5B/4Z1llEjet4kjb01Jmw
 j2A7QeQln0lqWfAXux4Rw7G7bnmN8Zsph8BYKz5K2vYfAca1Y+xhlNPRRSmsD7Wx
 +zHR87eKQ+WEL8x+7iBnw5tgqKvdKVyqmkKHm1y/Hr4DqewuOTgvVZJ6FnxG6hGA
 PeNnQrM1GOLGxU28tlROuGnaUTT1knBQcoJy2lWwxx4on2S/XzAMcetEq8e0RR2C
 0WOotWAQPSPicncr17Gmx7kNewcAwJ+bnNmbkXsuIsGksOkcil+Q+H0Y5gzImYQu
 XBRbuhLwqrFxqSfOyQIppFa0w5KGF7Mm9zTyjaO9DshpTny9gwsxJK2r0rh6ucbq
 Rt3WuJmJwdMZ9XT8iBRJonkGle4Q6dmtuHu0pqlJzjclfLwvLUoxNZwc0k0e5g2f
 a/PGNUj0rqSo6AgUfjlvQU8M/f3T9X0bRIIE7zWbIo8P0qxJPUDBnz+CHHADVD4G
 Yn/rM1omIfcMCIOKiY3l53Nclr6Nld2U1Mg4tMiG32AkE8lefU4q1dlfUblO/Vrw
 wAAoG54IMH4ekv5ljSeAKR0cB+a6PzlLwZivwZaN9/mUuMBRYlFSQEhRD1KdhZbR
 L/c9isoMAqk=
 =xWf5
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.15/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Pull "device tree changes for omaps for v4.15 merge window" from Tony Lindgren:

Device tree changes for omaps for v4.15 merge window to improve
support for omap35xx-evm, am34xx-epos-evm and dra7:

- A series of changes to fix support for omap35xx-evm

- A series of changes to add earlycon support for n8x0, pandaboard
  and omap5 boards

- A series of changes for am43xx-epos-evm pinctrl modes for default
  and sleep states

- A series of changes to correct pbias regulator voltage for dra7
  from 3V to 3.3V

- Use microchip compatible instead of deprecated mcp compatible for
  mcp23017

* tag 'omap-for-v4.15/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (22 commits)
  ARM: dts: omap3: Replace deprecated mcp prefix
  ARM: dts: dra7-evm: Move pcie RC node to common file
  ARM: dts: omap5: Increase max-voltage of pbias regulator
  ARM: dts: dra7: Increase max-voltage of pbias regulator
  ARM: dts: am43xx-epos-evm: Add default pinmux for unused pins
  ARM: dts: am43xx-epos-evm: Add default and sleep pinmux for usb2_phy1 and usb2_phy2
  ARM: dts: am43xx-epos-evm: Add default and sleep pinmux for uart0
  ARM: dts: am43xx-epos-evm: Add default and sleep pinmux for matrix_keypad0
  ARM: dts: am43xx-epos-evm: Add sleep pinmux for mmc1
  ARM: dts: am43xx-epos-evm: Add sleep pinmux for pixcir_ts
  ARM: dts: am43xx-epos-evm: Add sleep pinmux for gpmc
  ARM: dts: am43xx-epos-evm: Add sleep pinmux for ecap0
  ARM: dts: am43xx-epos-evm: Add sleep pinmux for qspi1
  ARM: dts: am43xx-epos-evm: Add sleep pinmux for spi0 and spi1
  ARM: dts: am43xx: Introduce additional pinmux definitions for DS0
  ARM: dts: Configure earlycon for omap5-common
  ARM: dts: Configure earlycon for pandaboard
  ARM: dts: Configure earlycon for n8x0
  ARM: dts: omap3-evm: Add DSS {vdds_dsi,vdda_video}-supply references
  ARM: dts: omap3: Add Sharp LS037V7DW01 'envdd' supply
  ...
2017-10-20 00:45:19 +02:00
Arnd Bergmann
ab63d1efc5 Drop omap legacy platform data for IRQ, DMA and IO resources. With the
dts files fixed up to contain the necessary data for basic resources, we
 can drop the related platform data.
 
 Note that this branch depends on the "omap-for-v4.15/fixes-dt-signed"
 branch and the patches with dependencies are based on a merge with that
 branch.
 
 These patches first ensure things keep working for the legacy "ti,hwmods"
 property when we start making it optional, then adds a minimal TI sysc
 interconnect target device driver to handle the new generic "ti,sysc"
 compatible property. And then we can finally drop the legacy platform
 data for IRQ, DMA and IO resources as seen in the diffstats.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlnpH4MRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXOflw//a6XK67MvvBAni0jUrEvVsXkIszk/V8bm
 2rTnBT+8mdH7QjH2QQrvtS5XX7uVSY27Pay9yiudhB/ZvHdih4SguSZB2JC9nMyf
 uAJAk5JUXvGdlj7NjMhIEEQZHzb2GYXlwNWKW8201FgjTrUs/miRLb0+bBi0+a5O
 02FFYb45Gcv0xQlwcG7yAWzjCpy5a0Vd75M/Q+aGeNXeZagrH1bLtc6dNY59RPKs
 0D51XGQNHyVDITArBms9Q6O+MyIHnRcL3zdKRGrWMhNXBwP5jwE6EE1Jnmcsge9m
 vPSdCpRlPQPPhBgLKAqZfHKXEpaVQfPjq7vp/ZFUiBSMuyNb2SP7YCOnh06cZwjZ
 hz4eMIQVvABBNvGMmg934hWP7OHSQkgxn5+zPo5o3gYvv+GvrKRUmxfaDpUoX4Ld
 oLUUcCfb4r0YAr5S+iCXaGtEdYhXdL1xzndSKFNlf+tx95BxbsfQ4u7pITMjLTAB
 vXBJASquuLQYRumWXPnMUDkKuTEJPq/ndSIOfdSU+09jFKGwkv/2C15YO8uZsH6m
 fWSUEGyD+c9hbnYDNE5mXkB4OeP7aGeCJC0RaucHXOeNNJJPRgNXPeHJA2aXYam+
 ml28jwoPRoOCE+SjGV0RtxjDAjMuc3Xknq6xq5GmHp8peHdeG+GaD4qdJThlcgRl
 yLnaNnEoZsI=
 =UKzm
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.15/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "more soc changes for omaps for v4.15 merge window" from Tony Lindgren:

Drop omap legacy platform data for IRQ, DMA and IO resources. With the
dts files fixed up to contain the necessary data for basic resources, we
can drop the related platform data.

Note that this branch depends on the "omap-for-v4.15/fixes-dt-signed"
branch and the patches with dependencies are based on a merge with that
branch.

These patches first ensure things keep working for the legacy "ti,hwmods"
property when we start making it optional, then adds a minimal TI sysc
interconnect target device driver to handle the new generic "ti,sysc"
compatible property. And then we can finally drop the legacy platform
data for IRQ, DMA and IO resources as seen in the diffstats.

* tag 'omap-for-v4.15/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (25 commits)
  bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove
  bus: ti-sysc: mark PM functions as __maybe_unused
  ARM: OMAP2+: omap_device: fix error return code in omap_device_copy_resources()
  ARM: OMAP2+: Drop legacy struct omap_hwmod_addr_space
  ARM: OMAP2+: Drop omap_hwmod_dma_info
  ARM: OMAP2+: Drop omap_hwmod_irq_info
  ARM: OMAP4: Remove legacy IRQ for PRM
  ARM: OMAP3: Remove legacy IRQ for PRM
  bus: ti-sysc: Add minimal TI sysc interconnect target driver
  ARM: OMAP2+: Populate legacy resources for dma and smartreflex
  ARM: OMAP2+: Parse module IO range from dts for legacy "ti,hwmods" support
  ARM: dts: Configure SmartReflex only to idle the interconnect target module
  ARM: dts: Add nodes for missing omap4 interconnect target modules
  dt-bindings: bus: Minimal TI sysc interconnect target module binding
  ARM: dts: Add missing hwmod related properties for dra7
  ARM: dts: Add missing hwmod related nodes for am33xx
  ARM: dts: Add missing dma hwmod property for omap5
  ARM: dts: Add missing wdt3 node for omap4
  ARM: dts: Add missing hsi node for omap4
  ARM: dts: Add missing onewire node for omap4
  ...
2017-10-20 00:43:31 +02:00
Arnd Bergmann
6f4bd48ff9 Merge tag 'omap-for-v4.15/fixes-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "non-urgent device tree fixes for omaps for v4.15 merge window"
from Tony Lindgren

Non-urgent device tree fixes for omaps that can all wait for v4.15
merge window.

Turns out that we have many devices working just because we have
the legacy platform data still around. This is mostly an issue
for omap4, other SoCs just have minimal fixes needed.

As many of the missing device tree nodes and properties are for
devices that have no drivers in the mainline kernel, such as
slimbus, iss, mcasp, aess, fdif and gpu, we might as well start
using the new "ti,sysc" interconnect target module binding for
them so we can get the devices with no child device drivers idled.

This also makes it possible to drop unnecessary platform data
in later patches.

* tag 'omap-for-v4.15/fixes-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Fix typo for omap4 mcasp rx path
  ARM: dts: Configure SmartReflex only to idle the interconnect target module
  ARM: dts: Add nodes for missing omap4 interconnect target modules
  dt-bindings: bus: Minimal TI sysc interconnect target module binding
  ARM: dts: Add missing hwmod related properties for dra7
  ARM: dts: Add missing hwmod related nodes for am33xx
  ARM: dts: Add missing dma hwmod property for omap5
  ARM: dts: Add missing wdt3 node for omap4
  ARM: dts: Add missing hsi node for omap4
  ARM: dts: Add missing onewire node for omap4
  ARM: dts: Add missing smartreflex node and binding for omap4
  ARM: dts: Add missing hwmods property for omap4 dma
  ARM: dts: Add missing properties for omap4 control modules
  ARM: dts: Configure pmu without interrupt for omap4430
  ARM: dts: Add missing dma hwmods property for omap3
2017-10-20 00:39:05 +02:00
Arnd Bergmann
d73e979f2c Merge tag 'v4.15-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/soc
Pull "Rockchip dts64 updates for 4.15 part1" from Heiko Stübner:

The biggest step forward is probably the enablement of display support
on the rk3399-firefly, which got its default serial set as well and
got cec support as well.
Gru boards got their touchpad support refined to actually mark the button
correctly and also git their rt5514 dsp added.
And finally the rk3328 eval board got its cpu regulator and mmc nodes.

* tag 'v4.15-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: enable cec pin for rk3399 firefly
  arm64: dts: rockchip: add the cec clk for dw-mipi-hdmi on rk3399
  arm64: dts: rockchip: default serial for Firefly-RK3399
  arm64: dts: rockchip: enable touchpad button for rk3399-gru-kevin
  arm64: dts: rockchip: enable display subsystem on rk3399-firefly
  arm64: dts: rockchip: Add rt5514 dsp for rk3399 gru
  arm64: dts: rockchip: add cpu regulator for rk3328 evaluation board
  arm64: dts: rockchip: add mmc nodes for rk3328 evaluation board
2017-10-20 00:39:04 +02:00
Arnd Bergmann
19748e26f7 Merge tag 'v4.15-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/soc
Pull "Rockchip dts32 updates for 4.15 part1" from Heiko Stübner:

One new board the Vyasa from Amarula Solutions using a rk3288
and core lvds node for the newly added driver+binding.
Also bindings + nodes for the Mali-Utgard GPUs found on some
Rockchip socs like rk3036 and rk3188. With the recently revived
Lima project they can even render a red triangle to a png file.

* tag 'v4.15-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: Enable thermal on rk3288-vyasa board
  ARM: dts: rockchip: fix mali400 ppmmu interrupt names
  ARM: dts: rockchip: Enable mali GPU node on rk3288-vyasa
  ARM: dts: rockchip: enable gpu on rk3188-radxarock
  ARM: dts: rockchip: add gpu nodes on rk3066/rk3188
  ARM: dts: rockchip: add rk322x gpu node
  ARM: dts: rockchip: enable the gpu on rk3036-kylin boards
  ARM: dts: rockchip: add rk3036 gpu node
  dt-bindings: gpu: mali-utgard: add optional power-domain reference
  dt-bindings: gpu: mali-utgard: add optional supply regulator
  dt-bindings: gpu: mali-utgard: Add Rockchip Utgard Malis
  ARM: dts: rockchip: enable vops and hdmi output on rk3288-vyasa
  ARM: dts: rockchip: Add rk3288 vyasa board
  dt-bindings: Add vendor prefix for Amarula Solutions
  ARM: dts: rockchip: add LVDS node for rk3288
2017-10-20 00:39:02 +02:00
Arnd Bergmann
7d738dbbe2 Merge tag 'stm32-dt-for-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/soc
Pull "STM32 DT updates for v4.15, round 1" from Alexandre Torgue:

Highlights:
----------
 -Add I2C1 support on STM32F746 SoC
 -Enable I2C1 on STM32F746 eval board
 -Add Timers support on STM32F746 SoC
 -Add USB HS and FS supports on STM32F746 Soc
 -Enable USB HS on STM32F746 disco and eval boards
 -Enable USB FS en STM32F746 disco board
 -Add Vrefbuf to STM32H743 SoC
 -Add LPTIMERS support on STM32H743 SoC
 -Add DMAMUX support on STM32H743 SoC
 -Enable STM32H743 clock driver
 -Add MDMA support on STM32H743 SoC
 -Change pinctrl pinmux entries for all SoC.

* tag 'stm32-dt-for-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32: Add MDMA support for STM32H743 SoC
  ARM: dts: stm32: Enable USB FS on stm32f746-disco
  ARM: dts: stm32: Add USB FS support for STM32F746 MCU
  ARM: dts: stm32: Enable USB HS on stm32f746-disco
  ARM: dts: stm32: Enable USB HS on stm32746g-eval
  ARM: dts: stm32: Add USB HS support for STM32F746 MCU
  ARM: dts: stm32: change pinctrl bindings definition
  ARM: dts: stm32: Enable STM32H743 clock driver
  ARM: dts: stm32: fix hse clock frequency on STM32H743 Eval board
  ARM: dts: stm32: add Timers driver for stm32f746 MCU
  ARM: dts: stm32: Add DMAMUX support for STM32H743 SoC
  ARM: dts: stm32: Add lptimer definitions to stm32h743
  ARM: dts: stm32: add vrefbuf to stm32h743
  ARM: dts: stm32: Add I2C1 support for STM32F746 eval board
  ARM: dts: stm32: Add I2C1 support for STM32F746 SoC
2017-10-20 00:39:00 +02:00
Arnd Bergmann
282e1cd163 Merge tag 'qcom-dts-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc
Pull "Qualcomm Device Tree Changes for v4.15" from Andy Gross:

* Add Support for MSM8974 based Fairphone 2 phone
* Add support for MSM8974 based Sony Xperia Z2 Tablet
* Add MSM8660 GSBI6/7 nodes
* Disable GSBI6 at APQ8064 platform level
* Fix phy cells on APQ8064

* tag 'qcom-dts-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  ARM: dts: msm8974-FP2: Add USB node
  ARM: dts: msm8974-FP2: Add sdhci1 node
  ARM: dts: msm8974-FP2: Add regulator nodes for FP2
  ARM: dts: msm8974-FP2: Introduce gpio-keys nodes
  ARM: dts: qcom: Add initial DTS file for Fairphone 2 phone
  ARM: dts: qcom: add MSM8660 GSBI6 and GSBI7
  ARM: dts: qcom: msm8974: Add Sony Xperia Z2 Tablet
  ARM: dts: qcom-apq8064: disable gsbi6 i2c by default at soc dtsi
  ARM: dts: qcom-apq8064: Fix dsi and hdmi phy cells
2017-10-20 00:38:58 +02:00
Arnd Bergmann
2507514680 Merge tag 'qcom-arm64-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc
Pull "Qualcomm ARM64 Updates for v4.15" from Andy Gross:

* Add PCIE support to relevant MSM8996 based boards
* Add RPM clock controller node on MSM8996
* Add dload address on MSM8916 and MSM8996
* Add MBHC button support on APQ8016 SBC
* Add RTMFS specific compatible for rmtfs memory node
* Fixups for MSM8916 GPIO line names and MDP address length

* tag 'qcom-arm64-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  arm64: dts: msm8916: Mark rmtfs node as qcom, rmtfs-mem compatible
  arm64: dts: msm8996: Add the rpm clock controller node
  arm64: dts: qcom: sbc: Name GPIO lines
  arm64: dts: qcom: msm8916: Shrink mdp address length for msm8916
  arm64: dts: apq8016-sbc: add mbhc buttons support
  arm64: dts: qcom: Specify dload address for msm8916 and msm8996
  arm64: dts: apq8096-db820c: never disable regulator on LS expansion
  arm64: dts: apq8096-db820c: Enable on board 3 pcie root complex
  arm64: dts: qcom: msm8996: add support to pcie
2017-10-20 00:38:56 +02:00
Arnd Bergmann
c94c81390f Merge tag 'zynq-dt-for-4.15' of https://github.com/Xilinx/linux-xlnx into next/soc
Pull "arm: Xilinx ZynqMP DT changes for v4.15" from Michal Simek:

- Change 24c08 compatible string

* tag 'zynq-dt-for-4.15' of https://github.com/Xilinx/linux-xlnx:
  ARM: dts: zynq: Add generic compatible string for I2C EEPROM
2017-10-20 00:38:54 +02:00
Arnd Bergmann
061ae53266 Merge tag 'samsung-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc
Pull "Samsung DTS ARM changes for 4.15" from Krzysztof Kozłowski:

1. Add new board: Hardkernel Odroid HC1.
2. Fix incomplete Odroid-XU3/4 thermal-zones definition leading to
   possible overheat if first pair of A7+A15 cores is idle but rest of
   CPUs are busy.
3. Add capacity-dmips-mhz properties for CPUs of octa-core SoCs.
4. Add power button to Odroid XU3/4.
5. Improvements in Gscaler, HDMI and Mixer blocks on Exynos5.
6. Add suspend quirk to DWC3 USB controller to fix enumeration of
   SuperSpeed devices on Odroid XU4.
7. Add HDMI and MHL to Trats2.
8. Cleanups (redundant properties and nodes).

* tag 'samsung-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  dt-bindings: samsung: Document binding for new Odroid HC1 board
  ARM: dts: exynos: Add HDMI and Sil9234 to Trats2 board
  ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board
  ARM: dts: exynos: Move audio clocks configuration to odroidxu3-audio.dtsi
  ARM: dts: exynos: Add dwc3 SUSPHY quirk
  ARM: dts: exynos: Add status property to Exynos 542x Mixer nodes
  ARM: dts: exynos: Add status property to Exynos 5250 HDMI and Mixer nodes
  ARM: dts: exynos: Cleanup HDMI DCC definitions on Exynos5250 and Exynos542x boards
  ARM: dts: exynos: Move HDMI PHY node from boards to exynos5250.dtsi
  ARM: dts: exynos: Use specific compatibles for proper Gscaler limits on Exynos5250 and Exynos5420
  ARM: dts: exynos: Remove redundant interrupt properties in gpio-keys on Odroid boards
  ARM: dts: exynos: Add power button for Odroid XU3/4
  ARM: dts: exynos: Remove the display-timing and delay from Rinato
  ARM: dts: exynos: add exynos5422 cpu capacity-dmips-mhz information
  ARM: dts: exynos: add exynos5420 cpu capacity-dmips-mhz information
  ARM: dts: exynos: fix incomplete Odroid-XU3/4 thermal-zones definition
2017-10-20 00:38:51 +02:00
Arnd Bergmann
b073a8991f Merge tag 'davinci-for-v4.15/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc
Pull "DaVinci DT updates for v4.15" from Sekhar Nori:

Add support for accessing DSP on DA850 SoC when using
device-tree.

* tag 'davinci-for-v4.15/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: da8xx-dt: Add OF_DEV_AUXDATA entry for DSP clock matching
  ARM: dts: da850-lcdk: Add and enable CMA reserved pool for DSP
  ARM: dts: da850: Add DSP node
2017-10-20 00:38:10 +02:00
Arnd Bergmann
4167ca1e85 Merge tag 'hisi-arm64-dt-for-4.15' of git://github.com/hisilicon/linux-hisi into next/soc
ARM64: DT: Hisilicon SoC DT updates for 4.15

- Add CoreSight related nodes for hi6220
- Add GPIO line names for hikey960
- Rectify the GPIO line names of the Poplar board to keep consistency
- Add thermal sensor binding doc and dt nodes for hi3660

* tag 'hisi-arm64-dt-for-4.15' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: Register Hi3660's thermal sensor
  dt-bindings: Document the hi3660 thermal sensor binding
  arm64: dts: hisilicon: Standardize Poplar GPIO line names
  arm64: dts: hikey960: Update HiKey960 with GPIO line names
  arm64: dts: hi6220: add coresight dt nodes
2017-10-20 00:38:09 +02:00
Linus Walleij
d2b85241a9 ARM: dts: Add TVE200 to the Gemini SoC DTSI
The Faraday TVE200 is present in the Gemini SoC, sometimes
under the name "TVC". Add it to the SoC DTSI file along with
its resources.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-20 00:38:08 +02:00
Arnd Bergmann
6260304f1a Merge tag 'juno-updates-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/soc
Pull "ARMv8 Vexpress/Juno DT update for v4.15" from Sudeep Holla:

Just single update to enable PSCI support on Foundation models

* tag 'juno-updates-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: foundation-v8: Enable PSCI mode
2017-10-20 00:38:06 +02:00
Arnd Bergmann
b966bb4598 Merge tag 'aspeed-4.15-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/soc
Pull "ASPEED devicetree updates for 4.15" from Joel Stanley:

 - Cleanups of the ASPEED device trees
 - Enable the i2c bus on all platforms
 - Turn VUART on for BMC platforms
 - Bind watchdog two for compatilbiy with shipping u-boot

* tag 'aspeed-4.15-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: dts: aspeed-romulus: Enable VUART
  ARM: dts: aspeed-palmetto: Enable VUART
  ARM: dts: aspeed: Enable watchdog two
  ARM: dts: aspeed: Remove undocumented wdt properties
  ARM: dts: aspeed: Clean up UART nodes
  ARM: dts: aspeed: Correctly order UART nodes
  ARM: dts: aspeed: Add aliases for UARTs
  ARM: dts: aspeed-ast2500: Add I2C devices
  ARM: dts: aspeed-palmetto: Add I2C devices
  ARM: dts: aspeed-romulus: Add I2C devices
  ARM: dts: aspeed: Add I2C buses
  ARM: dts: aspeed: Reorder ADC node
  ARM: dts: aspeed: Move pinctrl subnodes to improve readability
2017-10-20 00:38:05 +02:00
Arnd Bergmann
9d2e8198d3 Merge tag 'socfpga_dts_for_v4.15_part1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/soc
Pull "SoCFPGA DTS updates for v4.15" from Dinh Nguyen:
- Stratix10 platform updates
  - Fix up gic register entry
  - Enable ethernet/SDMMC
  - Update reset manager properties

* tag 'socfpga_dts_for_v4.15_part1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  arm64: dts: stratix10: add reset property for various peripherals
  arm64: dts: stratix10: add the 'altr,modrst-off' property
  arm64: dts: stratix10: include the reset manager bindings
  arm64: dts: stratix10: add ethernet/sdmmc support to the S10 devkit
  arm64: dts: stratix10: fix up the gic register for the Stratix10 platform
2017-10-20 00:38:03 +02:00
Arnd Bergmann
063f7c8248 Merge tag 'renesas-dt-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Pull "Renesas ARM Based SoC DT Updates for v4.15" from Simon Horman:

* r7s72100 (RZ/A1) Peach board
  - Add pin groups for SCIF2 serial debug interface and Ethernet
    This avoids relying on bootloader settings
  - Support control of LED1 using gpio-leds

* r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs
  - Add MSIOF[012] support and define aliases for spi[0123]

* r8a7743 (RZ/G1M) SoC
  - Add I2C and IIC core nodes

* r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven development platform
   - Enable SDHI1 SD controller supporting high-speed and SDR50 transfers
   - Add chosen node to allow correct selection of serial console
     and the kernel command line
   - Enable RTC support
   - Enable USB2.0 host support
     This includes enabling USB PHY and internal PCI

* r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven and
  r8a7745 (RZ/G1E) iW-RainboW-G22M-SM SoMs
   - Enable Add SPI NOR support
     This devices is used to boot up the system to the SoM DT

* r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven SoM
  - Enable SDHI0 SD controller supporting high-speed transfers

* r8a7745 (RZ/G1E) iW-RainboW-G22D development platform
  - Add pnctl support for scif4
    This avoids reling on boot loader settings
  - Add EtherAVB support

* r8a7745 (RZ/G1E) iW-RainboW-G22M-SM SoM
  - Add basic SoM support
  - Enable MMCIF eMMC support
  - Enable RTC support
  - Enable SDHI1 SD controller supporting high-speed transfers

* r8a779[0-4] R-Car Gen2 SoCs
  - Add reset control properties
    Geert Uytterhoeven says:

    This patch series describes the reset topology on all R-Car Gen2 Socs,
    like was done before for R-Car Gen3 and RZ/G1.

    Resets usually match the corresponding module clocks.  Exceptions are:
      - The audio module has resets for the Serial Sound Interfaces only,
      - The display module has only a single reset for all DU channels, but
	adding reset properties for the display is postponed upon request
	from Laurent.

   - Convert to new CPG/MSSR bindings
     Geert Uytterhoven says:

     Currently Renesas R-Car Gen2 SoCs use the common clk-rcar-gen2,
     clk-mstp, and clk-div6 drivers, which depend on most clocks being
     described in DT.  Especially the module (MSTP) clocks are cumbersome
     and error prone, due to 3 arrays (clocks, clock-indices, and
     clock-output-names) to be kept in sync. In addition, the clk-mstp
     driver cannot be extended easily to also support module resets, which
     are provided by the same hardware module.

     Hence when developing support for R-Car Gen3 SoCs, another approach
     was chosen, which led to the CPG/MSSR driver core, and SoC-specific
     subdrivers (initially for R-Car Gen3, but later also for RZ/G1).

     This series converts the various R-Car Gen2 DTSes to migrate to the
     new CPG/MSSR drivers that were added in v4.13-rc1.

* r8a779[0,1,3,4] R-Car Gen2 SoCs
  - Stop grouping clocks under a "clocks" subnode
    Geert Uytterhoeven says:

    The current practice is to not group clocks under a "clocks" subnode,
    but just put them together with the other on-SoC devices.

    Hence this patch series implements this for the various R-Car Gen2
    DTSes that still need this (r8a7792.dtsi is OK).

* r8a7794 (E2) Alt board
  - Correct inverted sense of SD wip pins

* tag 'renesas-dt-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (48 commits)
  ARM: dts: r8a7743: Add MSIOF[012] support
  ARM: dts: r8a7745: Add MSIOF[012] support
  ARM: dts: iwg22d: Enable SDHI0 controller
  ARM: dts: iwg22m: Add SPI NOR support
  ARM: dts: r8a7745: Add QSPI support
  ARM: dts: iwg20m: Add SPI NOR support
  ARM: dts: r8a7743: Add QSPI support
  ARM: dts: iwg22m: Enable SDHI1 controller
  ARM: dts: r8a7745: Add SDHI controllers
  ARM: dts: r8a7794: Add reset control properties
  ARM: dts: r8a7793: Add reset control properties
  ARM: dts: r8a7792: Add reset control properties
  ARM: dts: r8a7791: Add reset control properties
  ARM: dts: r8a7790: Add reset control properties
  ARM: dts: r8a7743: Add IIC cores to dtsi
  ARM: dts: alt: use correct logic for SD WP pins
  ARM: dts: iwg20d-q7: Enable USB PHY
  ARM: dts: iwg20d-q7: Enable internal PCI
  ARM: dts: r8a7743: Link PCI USB devices to USB PHY
  ARM: dts: r8a7743: Add USB PHY DT support
  ...
2017-10-20 00:38:02 +02:00
Arnd Bergmann
c305cf3388 Merge tag 'renesas-dt-bindings-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Pull "Renesas ARM Based SoC DT Bindings Updates for v4.15" from Simon Horman:

* Consistently do not use ';' in documentation of compat strings
  for boards. A misture of using and not using a trailing ';' had
  krept in over time with not using being dominant.

* Document bindings for
  - Eagle board and r8a77970 (V3M) SoC bindings.
    Eagle is a board for the V3M SoC
  - Document Kingfisher board bindings.
    Kingfisher is an extension board for the H3ULCB and M3ULCB boards.

* Add r8a77970 (V3M) SYSC power domain definitions

  Add macros usable by the device tree sources to reference r8a77970 SYSC
  power domains by index.

* Add Renesas SoC DT bindings doc to Renesas ARM section of MAINTAINERS file

* Drop bogus node name suffix from example of /renesas,dw-hdmi binding

* Document APMU and SMP enable method for r8a7745 (RZ/G1E) SoC

* tag 'renesas-dt-bindings-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: remove inconsistent ; from documentation
  arm64: renesas: document Eagle board bindings
  arm: shmobile: Document Kingfisher board DT bindings
  dt-bindings: power: add R8A77970 SYSC power domain definitions
  MAINTAINERS: Add Renesas SoC DT bindings doc to Renesas ARM sections
  ARM: shmobile: Document R-Car V3M SoC DT bindings
  dt-bindings: display: renesas: dw-hdmi: Drop bogus node name suffix
  dt-bindings: apmu: Document r8a7745 support
2017-10-20 00:38:00 +02:00
Arnd Bergmann
025792ca72 Merge tag 'renesas-arm64-dt-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Pull "Renesas ARM64 Based SoC DT Updates for v4.15" from Simon Horman:

* r8a7795 (H3)
  - Use r8a7795-cpg-mssr and r8a7795-sysc bindings
    Hardcoded indicies are replaced with symbols now that they are available

  - Drop bogus HDMI node name suffixes
    Laurent Pinchart says: Node names should not use numerical suffixes if
    the nodes can be distinguished by unit-address

  - Update PFC node name to pin-controller
    Shimoda-san says the PFC node name is changed "from e6060000.pfc and
    pfc@e6060000 to e6060000.pin-controller and pin-controller@e6060000
    like other Renesas SoCs."

* r8a7795 (H3) ES1.0
  - Drop extra zero from XHCI unit address
    This corrects a typo were ee0400000 rather than ee040000 was used
    as the unit address.

* r8a7796 (M3-W)
  - Add FDP1 instance
    Laurent Pinchart says: The r8a7796 has a single FDP1 instance.

* r8a7795 (H3) and r8a7796 (M3-W) SoCs
  - Add USB3.0 peripheral device nodes
    Shimoda-san says that this is not enabled on the Salvator-X/XS boards
    for now as:
     + we need a special cable (USB type-A to A cross cable).
     + we can swap the role by renesas_usb3 driver even if we use a normal
	cable and after usb3.0 host is running, but I think it's a special
	use case.

* r8a7795 (H3) and r8a7796 (M3-W) ULCB boards
  - Enable display output
    Laurent Pinchart says: The DU is already wired up to the HDMI encoder,
    all we need to do is enable it.

* r8a77995 (D3) Draak board
  - Enable EthernetAVB and , USB2.0 Host and PHY

  - Add serial console pins.
    This is safe to do now that r8a77995 PFC driver support is present

* r8a77970 (V3M)
  - Add basic support for SoC and EtherAVB, [H]SCIF and SYS-DMAC nodes
    This is a step towards enabling EtherAVB and [H]SCIF with SYS-DMAC
    in the Eagle board support for which is under review

* tag 'renesas-arm64-dt-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (22 commits)
  arm64: dts: renesas: r8a7796: add USB3.0 peripheral device node
  arm64: dts: renesas: r8a7795: add USB3.0 peripheral device node
  arm64: dts: renesas: r8a77995: draak: enable EthernetAVB
  arm64: dts: renesas: r8a77995: draak: enable USB2.0 Host (EHCI/OHCI)
  arm64: dts: renesas: r8a77995: draak: enable USB2.0 PHY
  arm64: dts: renesas: r8a77995: add USB2.0 Host (EHCI/OHCI) device node
  arm64: dts: renesas: r8a77995: Add USB2.0 PHY device node
  arm64: dts: draak: Add serial console pins
  arm64: dts: renesas: r8a77970: add EtherAVB support
  arm64: dts: renesas: r8a77970: add [H]SCIF support
  arm64: dts: renesas: r8a77970: add SYS-DMAC support
  arm64: dts: renesas: initial R8A77970 SoC device tree
  arm64: dts: renesas: r8a77995: Add EthernetAVB device node
  arm64: dts: renesas: r8a77995: add GPIO device nodes
  arm64: dts: renesas: r8a77995: Use r8a7795-cpg-mssr binding definitions
  arm64: dts: renesas: r8a77995: Use r8a7795-sysc binding definitions
  arm64: renesas: Add Renesas R8A77970 Kconfig support
  arm64: dts: renesas: r8a7795: Drop bogus HDMI node names suffixes
  arm64: dts: renesas: ulcb: Enable display output
  arm64: dts: renesas: r8a77995: update PFC node name to pin-controller
  ...
2017-10-20 00:37:59 +02:00
Arnd Bergmann
400f170dd3 Merge tag 'integrator-pciv3-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/soc
Pull "DTS updates for the Integrator PCIv3 driver" from Linus Walleij:

These are the DTS file changes required to fix bugs and satisfy
requirements for the new PCIv3 driver in the PCI subsystem.
The binding changes have been merged to the PCI tree.

[arnd] Note: this is an incompatible DT binding change, so things
       will break during bisection or when using an old dtb file.
       Since integrator has no real users, we can make an exception
       for that.

* tag 'integrator-pciv3-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: dts: Update Integrator/AP PCI v3 compatible
  ARM: dts: integratorap: Fix PCI windows
  ARM: dts: add the PCI clock to the device tree
2017-10-20 00:37:57 +02:00
Rob Herring
d8bcaabee4 arm64: dts: fix unit-address leading 0s
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using
the following command:

perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm64/boot/dts -type -f -name '*.dts*'

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-20 00:37:56 +02:00
Rob Herring
8dccafaa28 arm: dts: fix unit-address leading 0s
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using
the following command:

perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*'

Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some
occurrences of uppercase hex.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-20 00:37:54 +02:00
Surender Polsani
59b630878d arm: boot: dts: artpec6: Remove unnecessary interrupt-parent property from sub-nodes
"interrupt-parent" property is declared in root node, so it is global
to all nodes. This property is re-declared in few sub-nodes. To avoid
duplication this property is removed from following sub-nodes:
pmu, amba@0, amba@0/ethernet.

Signed-off-by: Surender Polsani <surenderp@techveda.org>
Acked-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-20 00:37:52 +02:00
Frank Rowand
4ee7c0d964 of: overlay: make pr_err() string unique
The same error string occurs in drivers/of/resolver.c.  Change
the error here to more precisely describe this case, and avoid
the possible confusion of looking in the wrong source location
to understand the cause of an error.

Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-19 17:15:09 -05:00
Frank Rowand
a1d19bd4cf of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove
A device tree overlay notifier can return NOTIFY_OK, NOTIFY_STOP,
or an embedded errno.  overlay_notify() incorrectly reports an
error for NOTIFY_OK.

Reported-by: atull@kernel.org
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-19 17:15:09 -05:00
Matt Redfearn
f16ff2bdb1 clocksource/drivers/mips-gic-timer: Add fastpath for local timer updates
Always accessing the compare register via the CM redirect region is
(relatively) slow. If the timer being updated is the current CPUs
then this can be shortcutted by writing to the CM VP local region.

Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:51:31 +02:00
Matt Redfearn
7957b07b55 clocksource/drivers/mips-gic-timer: Remove pointless irq_save,restore
The function gic_next_event is always called with interrupts disabled, so
the local_irq_save / local_irq_restore are pointless - remove them.

[Daniel Lezcano: Fixed warning by removing unused variable 'flags']

Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:49:45 +02:00
Mark Rutland
a7fb4577bb clocksource/drivers/arm_arch_timer: Fix DEFINE_PER_CPU expansion
Our ctags mangling script can't handle newlines inside of a
DEFINE_PER_CPU(), leading to an annoying message whenever tags are
built:

  ctags: Warning: drivers/clocksource/arm_arch_timer.c:302: null expansion of name pattern "\1"

This was dealt with elsewhere in commit:

  25528213fe ("tags: Fix DEFINE_PER_CPU expansions")

... by ensuring each DEFINE_PER_CPU() was contained on a single line,
even where this would violate the usual code style (checkpatch warnings
and all).

Let's do the same for the arch timer driver, and get rid of the
distraction.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:49:06 +02:00
Ard Biesheuvel
21492e1333 clocksource/drivers/arm_arch_timer: Validate CNTFRQ after enabling frame
The ACPI GTDT code validates the CNTFRQ field of each MMIO timer
frame against the CNTFRQ system register of the current CPU, to
ensure that they are equal, which is mandated by the architecture.

However, reading the CNTFRQ field of a frame is not possible until
the RFRQ bit in the frame's CNTACRn register is set, and doing so
before that willl produce the following error:

  arch_timer: [Firmware Bug]: CNTFRQ mismatch: frame @ 0x00000000e0be0000: (0x00000000), CPU: (0x0ee6b280)
  arch_timer: Disabling MMIO timers due to CNTFRQ mismatch
  arch_timer: Failed to initialize memory-mapped timer.

The reason is that the CNTFRQ field is RES0 if access is not enabled.

So move the validation of CNTFRQ into the loop that iterates over the
timers to find the best frame, but defer it until after we have selected
the best frame, which should also have enabled the RFRQ bit.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:49:05 +02:00
Daniel Lezcano
2d764649e4 MAINTAINERS: Fix path and add bindings to timers
As spotted by Andreas Färber, the clocksource directory path does not follow
the rule where a maintained directory must end with a '/' character.

Also, the timers devicetree bindings documentation is not mentioned in the
entry, so every submission touching the devicetree documentation misses to
Cc the maintainers of the timers.

Reported-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:49:04 +02:00
Arnd Bergmann
2f8a26c166 clocksource: Improve GENERIC_CLOCKEVENTS dependency
We regularly run into build errors when a clocksource driver selects
CONFIG_TIMER_OF while CONFIG_GENERIC_CLOCKEVENTS is disabled:

In file included from drivers/clocksource/timer-of.c:25:0:
drivers/clocksource/timer-of.h:35:28: error: field 'clkevt' has incomplete type

At the moment, three drivers can show this behavior: ARMV7M_SYSTICK,
CLKSRC_ST_LPC and CLKSRC_NPS. We could add further dependencies as we did
many times, but I have looked a little bit more at what architectures
are left that don't use GENERIC_CLOCKEVENTS, and this shows that there
is a better solution.

On arch/frv and arch/ia64, we never select CONFIG_GENERIC_CLOCKEVENTS
and we also don't use ARCH_USES_GETTIMEOFFSET, which would
block the clocksource Kconfig menu. On m68k, some platforms use
CONFIG_GENERIC_CLOCKEVENTS, some use ARCH_USES_GETTIMEOFFSET, and some
use neither of them. The good news is that there is no configuration that
does not set CONFIG_GENERIC_CLOCKEVENTS but that wants to enable any of
the Kconfig symbols in the menu, so we can simply replace the dependency
with the stricter one. While in theory one could have a clocksource
driver without the clockevent infrastructure, this seems unlikely
to be relevant in the future any more.

We can probably drop some of the other dependencies as well now,
e.g. there should generally be no reason to depend on CONFIG_ARM
unless the driver uses architecture specific assembly.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:49:03 +02:00
Arvind Yadav
2554828b17 clocksource/drivers/rockchip: pr_err() strings should end with newlines
pr_err() messages should end with a new-line to avoid other messages being
concatenated.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:49:02 +02:00
Arvind Yadav
3c044a15ff clocksource/drivers/owl: pr_err() strings should end with newlines
pr_err() messages should end with a new-line to avoid other messages being
concatenated.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:49:01 +02:00
Arvind Yadav
1893428bd8 clocksource/drivers/fttmr010: pr_err() strings should end with newlines
pr_err() messages should end with a new-line to avoid other messages being
concatenated.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:49:00 +02:00
Geert Uytterhoeven
2d1d5172bf clocksource/drivers/sh_cmt: Use of_device_get_match_data() helper
Use the existing of_device_get_match_data() helper instead of
open-coding its functionality.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:48:59 +02:00
Geert Uytterhoeven
d1d285972e clocksource/drivers/sh_cmt: Remove unused "renesas, channels-mask" handling
The in-driver channel configuration in sh_cmt_info.channels_mask is now
always set for all CMT devices instantiated from DT.

Hence the "renesas,channels-mask" property is no longer checked, and its
handling can be removed, cfr. commit 4e18111ff3 ("devicetree:
bindings: Remove deprecated properties").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:48:58 +02:00
Geert Uytterhoeven
8d50e9476b clocksource/drivers/sh_cmt: Mark "renesas,cmt-48-gen2" deprecated
Document in the driver that "renesas,cmt-48-gen2" is deprecated, but
still supported for backward compatibility with old DTBs, cfr. commit
4e18111ff3 ("devicetree: bindings: Remove deprecated
properties").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:48:57 +02:00
Geert Uytterhoeven
f11fb6df3c clocksource/drivers/sh_cmt: Remove support for "renesas,cmt-32*"
Remove driver matching support for the unused "renesas,cmt-32" and
"renesas,cmt-32-fast" compatible values, cfr. commit 203bb34799
("devicetree: bindings: Remove unused 32-bit CMT bindings").

As this removes the last user of SH_CMT_32BIT_FAST, all support for this
variant is removed from the driver.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:48:56 +02:00
Magnus Damm
83c79a6d8d clocksource/drivers/sh_cmt: Support separate R-Car Gen2 CMT0/1
Add support for the new R-Car Gen2 CMT0 and CMT1 bindings. Support
for the old DT binding is still kept around, however devices using
such binding will be treated as a low-feature CMT0 device. If users
want to make use of CMT1-specific features then they need to update
their DTBs. No special CMT1-specific features are however implemented
by his patch, only DT bindings are redone as groundwork for future
feature patches.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:48:55 +02:00
Magnus Damm
464eed841f clocksource/drivers/sh_cmt: Use 0x3f mask for SH_CMT_48BIT case
Always use 0x3f as channel mask for the SH_CMT_48BIT type of devices.
Once this patch is applied the "renesas,channels-mask" property will
be ignored by the driver for older devices matching SH_CMT_48BIT. In
the future when all CMT types store channel mask in the driver then
we will be able to deprecate and remove "renesas,channels-mask" from DTS.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:48:54 +02:00
Geert Uytterhoeven
e20824e944 dt-bindings: timer: renesas, cmt: Fix SoC-specific compatible values
While the new family-specific compatible values introduced by commit
6f54cc1adc ("devicetree: bindings: R-Car Gen2 CMT0 and CMT1
bindings") use the recommended order "<vendor>,<family>-<device>", the
new SoC-specific compatible values still use the old and deprecated
order "<vendor>,<device>-<soc>".

Switch the SoC-specific compatible values to the recommended order while
there are no upstream users of these compatible values yet.

Fixes: 7f03a0ecfd ("devicetree: bindings: r8a73a4 and R-Car Gen2 CMT bindings")
Fixes: 63d9e8ca0d ("devicetree: bindings: Deprecate property, update example")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:48:53 +02:00
Kees Cook
1843594c56 ahci: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Adds a pointer back to link
structure.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: linux-ide@vger.kernel.org
Link: https://lkml.kernel.org/r/20171016215658.GA101965@beast
2017-10-19 23:15:16 +02:00
Arnd Bergmann
e4191c53ae STM32 defconfig updates for v4.15, round 1
Highlights:
 ----------
  -Regenerate default configuration
  -Add DMAMUX support
  -Add I2C F7 support
  -Add MDMA support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZ5dEoAAoJEH+ayWryHnCFdlkP/jX6xof2Bs3yGsQWVMX7PBlF
 dsG90m0KtzaXlhef89zEH6SA5KEdBDPjbKFFaUgIrsjmlSZW/jICbUkt0fF0nuO5
 vZGWLdHicIcm3D0UnvVZbtjRXI6uxtzjtyqYhEFvmO20RUhRHsRaRNChJU0BlJUA
 kZaAoQbkHqgRyv9tPZcJi2iPFbr5pGaJQ3t8hQLJB09i7xW20kucCl11TKZ6rK5j
 9CvYCYfA+WeTtUxkEkDTw4Z5/KRyPWvzWjyjHU+2a9fSpSgn5deHKobXqZGsGS8r
 mQUc+Hco4SYxIyl12KZODRGcweDLNq7pGSDfiGrGAtvJn6zsj0PEm6+oRUxlI2lc
 p4ZXOJ7UxF8hfRIRMcZ9AZhBjGc9GPKqZZQsDMepNISQRBrlmxFWgg5pRiRTmGed
 EHGEkeZZi1wW6S3jhJCuYZzbPzGdXrCgFzqyeO+aEAfuk5qKKuiDL+g6ZbU5LTmu
 8efFwvH6xw/mwC4bhcVVn2FYgG/6cJnET1DyAcEJKRE2D2t22Nijq+mXBYI+2YSY
 eNxKPDIjRhupRXLGdnns/7T22OjN4ElAWqQnsLObpuG/2b40Q6b4x9g52X2RFcbx
 2x1aD5bKYf8wQFV3yE7ZU50WfuCxlxBxpafO8zesunPOjUwPKslpmTzYbK+qNpfv
 CchlMOdgKHxuzApQtWPb
 =B+my
 -----END PGP SIGNATURE-----

Merge tag 'stm32-defconfig-for-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/soc

Pull "STM32 defconfig updates for v4.15, round 1" from Alexandre Torgue:

Highlights:
----------
 -Regenerate default configuration
 -Add DMAMUX support
 -Add I2C F7 support
 -Add MDMA support

* tag 'stm32-defconfig-for-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: configs: stm32: Add MDMA support in STM32 defconfig
  ARM: configs: stm32: Add I2C F7 support in STM32 defconfig
  ARM: configs: stm32: Add DMAMUX support in STM32 defconfig
  ARM: configs: stm32: Update default configuration for v4.14-rc1
2017-10-19 22:55:28 +02:00
Linus Walleij
f14100b2a4 ARM: defconfig: select the right SX150X driver
The SX150X GPIO expander has been moved to pin control and
its Kconfig symbol has been renamed. We used to have a paper-over
thing in Kconfig but it was causing circular dependencies so
I have had to kill it off. Select the right driver instead.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-19 22:54:58 +02:00
Arnd Bergmann
0e130634e8 Qualcomm ARM Based defconfig Updates for v4.15
* Enable Sony Z2 tablet options
 * Enable USB on APQ8064/MSM8974
 * Fixup/catchup config to support newer options
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZ5QPSAAoJEFKiBbHx2RXVcckQALMEced9zWwImrhz29mCViEf
 t19dSUOXQHyH8pPZ+j8/FhUzk30wiMicOfCjFlZb0mYcKkqAQ7imyi4ztQfiUljh
 GHaE4ZgeNDpeW/4/B6JABT9eIW1MkFasedHlKqzUsW5ruIn4WvDJpIdwHwMLhJbF
 bmgjt1YBqdHrcMgTT3su5JLHaOb4vOottXhCkm2ntIjY/OSKo26dAjHIx1Zj7VTV
 9X2Yqjs5G+FZPtJa8EEW2h33xWtQIi2olymhZZRO3H4wQ/O3zuBViR6NGUqAWAde
 9wwRUC4e1INk+XiLApItJEEJzf1oS2nSh/dhmyog98NlKkAuqtkm4sMDSadu+bOv
 FEvcxM3Do6/WQuyinm+WAc2ZeIqLWPqSy5aAIB/8dZwMpQqJ3xQ2j0JjjpZyElom
 tkUR87Qj2b4g4vLWam1fjAFY8ungeApSPPoK3p9BjSh0njmAFe43SJjucNMG/ZSZ
 GEcs6sPPIMYgIJhyBzlsBApOb7sEkT7t70LU7mH9vwlXiNFugckEUppN8loIhKp7
 7t/iPf/UypErnpC4nS4qZbLWhS2NYkPlsV7NY5OClb8a3KU4g5f0xewkV31nol9U
 Bu+e+1bbYwPCowdWtWGbZ2uI3ezcj3aLCXnwU0FUDSlMXkrrQu0TMRRipTtwDMoM
 UrP8VaqRzF8/5VBCFIMC
 =90WE
 -----END PGP SIGNATURE-----

Merge tag 'qcom-defconfig-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc

Pull "Qualcomm ARM Based defconfig Updates for v4.15" from Andy Gross:

* Enable Sony Z2 tablet options
* Enable USB on APQ8064/MSM8974
* Fixup/catchup config to support newer options

* tag 'qcom-defconfig-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  ARM: qcom_defconfig: Enable Z2 Tablet related options
  ARM: qcom_defconfig: Disable DEBUG_GPIO
  ARM: qcom_defconfig: Enable configs for USB on apq8064/msm8974
  ARM: qcom_defconfig: Resync with new Kconfig options
2017-10-19 22:53:28 +02:00
Arnd Bergmann
f4b5c3bdc3 Qualcomm ARM64 Based defconfig Updates for v4.15
* Enable QCOM IOMMU
 * Enable Qualcomm USB options
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZ5QFzAAoJEFKiBbHx2RXVLWUQANdHCqlbTwvdNv5Ll2o3lpMa
 H0fztB0zNcodWGEfo1yR6VT0547BmeaxXRdhpc+DJ0hdpe4cRTFqPvnw7Exe+wnK
 IHO8JYKJb6cEWBMLirRDzZZgfcxfGDHPY91hKfzT/845YkmAs65W8DJxR+1+Rpmz
 KgcO27Vt06RYyC4WcUFnVpIBHW/4MmNsrdyRsRnBr3I7IRuAydoewNGvwzy1/R2u
 mNS+7S3RIc3tT8gmf6sPxEVbbiYOhEXnVesv9skZ/PJ/aX3w9tJWlhRfQtCmfQ7Q
 sTLX7W5S0gX2tZ4ujW/kgD5VdDzXyAX16rPtytkUSXcoN4ozNWBHYhWodSWHvJ7Q
 N2duWcSSpGk9setIOVVlNkQcUFkbxTvV/7zVxxMBIlOR9Ye2QTyUh6glKDJgHb8a
 9cLfOIdTnzXp1kJ2XBQSYK1ogc4/9EW9fvUhunmcFMdk4eFw5Fy+d6Ryyqwl0Mn8
 lSu5Kmi8V642hgF2q8CLPTBCWhljDGmaKRZgxjNnNSu1f6GuXY71/VyRIja+HFa1
 XNEIV5XATCgRLHnuqbHr4ezl/IKuYngGy4Qa0d/DXBfqUXavvJp05mKaWtdwwUSZ
 bph4ijCyNpl0L5+FJLyaLVkbIfVyED1O4IAzcVsjMrogVOXSwfogB3J5hFV1yOqS
 joW51c+X08qEBtGXpUVl
 =fj0L
 -----END PGP SIGNATURE-----

Merge tag 'qcom-arm64-defconfig-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc

Pull "Qualcomm ARM64 Based defconfig Updates for v4.15" from Andy Gross:

* Enable QCOM IOMMU
* Enable Qualcomm USB options

* tag 'qcom-arm64-defconfig-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  arm64: defconfig: re-enable Qualcomm DB410c USB
  arm64: defconfig: Enable QCOM_IOMMU
2017-10-19 22:52:24 +02:00
Arnd Bergmann
29ce2f3424 arm: Xilinx Zynq patches for v4.15
- Remove Soren from reviewer list
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlnkq1wACgkQykllyylKDCGN6wCfd5K3FU9KCUjoMVj2r5X8PhRL
 TB4An05r17xISNOwQR6GsJwU9cgxA5NH
 =SOzg
 -----END PGP SIGNATURE-----

Merge tag 'zynq-soc-for-4.15' of https://github.com/Xilinx/linux-xlnx into next/soc

Pull "arm: Xilinx Zynq patches for v4.15" from Michal Simek:

- Remove Soren from reviewer list

* tag 'zynq-soc-for-4.15' of https://github.com/Xilinx/linux-xlnx:
  MAINTAINERS: Remove myself as reviewer
2017-10-19 22:49:55 +02:00
Arnd Bergmann
818f62ab28 Samsung mach/soc changes for v4.15
1. Cleanups for s3c24xx and s3c64xx (memory allocation printks, code
    style).
 2. Remove of Exynos4212 related dead code (no more support for this
    SoC).
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZ4xDZAAoJEME3ZuaGi4PXWx4P/iEsO7Cbcc/rV8HjCjwIZY2h
 VomlTxxcL0P0d+bkDrkAl2f2BHl2rhfC3D4PoBNjFMeyYficqfgjRO4Zrhj1jL0g
 9JxiqcLVVpnn0wWgd5B3UPiLqSWGXPB7PCsdA/P/TjBonu+jmFbFtSRZtcFdLuIH
 uVKVnFLSzcnO4a//F5/Hf6OGbH4W7R69eIu2Ft7isjmFlSJOV4kAfOCNqlCUhaOm
 zhVai9StZpkDFfCKA4ksGdQITuMqJRldlklKfKJtm9AO8Njc96wMu/xvbtR+NzS6
 eWWgsCnrQsh35O9qK2fiyQPWa+Nm0Z8QyfTz2Td3wtnYpOOD8qEghow+5dQfhucl
 CP1nqwW0reK/ieq6qyR1tyJR/fHSmBQJLNGAfDf9n3EIoAIoo2ExxpE+XvdsP0rr
 GsN+PMFMOCSZl82UP3O9zN6QwjTRf9a3In3JaxJlAkmQe984d4dXzb84RCfKspFV
 0jLPypiuRGBnWey8QHzdRPtdXyCcZdUt0+f6TjtsIf0SHPu0p7Qu2S9v/kiEyVDp
 uOytpuLQup0/x35oYmEEKUwdGJefUehZm/rEKFYVQywn46YK1rQhvyJP3bDjW8Yy
 eQK8t2kTqhmMGycEW+1374LeA35pMXUaydAefBJXjqMApxMwUvsC4cd35ABfTONm
 FhQQ5KHK0O9WGC4GKzgI
 =vGPQ
 -----END PGP SIGNATURE-----

Merge tag 'samsung-soc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc

Pull "Samsung mach/soc changes for v4.15" from Krzysztof Kozłowski:

1. Cleanups for s3c24xx and s3c64xx (memory allocation printks, code
   style).
2. Remove of Exynos4212 related dead code (no more support for this
   SoC).

* tag 'samsung-soc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: EXYNOS: Remove Exynos4212 related dead code
  ARM: SAMSUNG: Simplify size used for kzalloc
  ARM: SAMSUNG: Remove printk for failed memory allocation
  ARM: s3c64xx: Delete an unnecessary return statement in samsung_bl_set
  ARM: s3c64xx: Remove printk for failed memory allocation in samsung_bl_set
  ARM: s3c2410: Fix typos in a comments
  ARM: s3c24xx: Simplify size used for kzalloc in iotiming get
  ARM: s3c24xx: Remove printk for failed memory allocation in iotiming get
2017-10-19 22:47:20 +02:00
Arnd Bergmann
977478f9e0 Samsung defconfig changes for v4.15
1. Enable USB3503 on multi_v7 for Odroid U3.
 2. Enable USB Attached SCSI for Odroid HC1.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZ4xAQAAoJEME3ZuaGi4PX0JIQAIA3XkkkjHthSKEennMX7kUi
 eQTL+6a64KCL3b4wl60Y6gqp2MsR65kcEx/PVUGBnZ1HHzHZ0FItbTNThQRg/n/y
 rVGCILIuo6kGsAL/xaSUOe/fdLsw7HhFDuYVUzidWisO2AH/uw0uAovrTUpV+vhQ
 JG51phGz0wLg52Zb4c5kkHOrD4U5/aiQMha5MjHctdWEckmADx/4IVJ2wnyn6LtN
 XedKqVg27Ye2PhOu3f97RCi290sPVDP8RFhbKbXV7qKj6HtahPjvbq4Uspewt2qM
 XhH80jay6RdwxrR+Yw7M42H4Qb7kRWoe/WYFfwU7C2zN3LP5E+eZ4Q155DXSzk12
 Snj7cg0FNWIy7C0MYnzAxfF+o99MEtVj8L2uE9TMyrlM8H92bs8bHSdyR4mY/oU9
 qrpU0J0tDiHQNHxeD35lm1toEDslmHGDZUxH3vHj1lKupfQurBZvkFsm6Uiicijt
 gab8aGlnfSMr6Xesbye9cqHo/RaQLZR0lp/kppeAgAtLvLfiAAKMvrl5R9Pudlwu
 Aw6L1ritS69kZt8+6eXvpYqErs2mjYHKtGiWloOqlWtDsuwNu6JAbNaR4P1DujvM
 xCMDldrijwN8cIxHTfl5gEDPdNv8mibKQnZ7wNx++hXeEQfACm392DXzcXIAFtR0
 c+ys6jLWTCBfTrCmEcBz
 =+nLs
 -----END PGP SIGNATURE-----

Merge tag 'samsung-defconfig-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc

Pull "Samsung defconfig changes for v4.15" from Krzysztof Kozłowski:

1. Enable USB3503 on multi_v7 for Odroid U3.
2. Enable USB Attached SCSI for Odroid HC1.

* tag 'samsung-defconfig-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: multi_v7_defconfig: Enable UAS support for Odroid HC1 board
  ARM: exynos_defconfig: Enable UAS support for Odroid HC1 board
  ARM: multi_v7_defconfig: Enable USB3503 driver
2017-10-19 22:46:29 +02:00