Commit graph

932,869 commits

Author SHA1 Message Date
Rakesh Pandit
32c662c58a lightnvm: include NVM Express driver if OCSSD is selected for build
Because NVM needs BLK_DEV_NVME, select it automatically if we mark NVM
in config file before building kernel.  Also append PCI to depends as
select doesn't automatically add dependencies.

Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 08:34:57 -06:00
Rakesh Pandit
c9d84b350f lightnvm: pblk: fix error path in pblk_lines_alloc_metadata
Use appropriate memory free calls based on allocation type used and
also fix number of times free is called if kmalloc fails.

Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 08:34:57 -06:00
Rakesh Pandit
a96d50fa0c lightnvm: remove already calculated nr_chnls
Remove repeated calculation for number of channels while creating a
target device.

Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 08:34:57 -06:00
Rakesh Pandit
88d31ea267 lightnvm: protect target type list with correct locks
nvm_tgt_types list was protected by wrong lock for NVM_INFO ioctl call
and can race with addition or removal of target types.  Also
unregistering target type was not protected correctly.

Fixes: 5cd907853 ("lightnvm: remove nested lock conflict with mm")
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 08:34:57 -06:00
Rakesh Pandit
bb6aa6f082 lightnvm: prevent bd removal if busy
When a virtual block device is formatted and mounted after creating
with "nvme lnvm create... -t pblk", a removal from "nvm lnvm remove"
would result in this:

446416.309757] bdi-block not registered
[446416.309773] ------------[ cut here ]------------
[446416.309780] WARNING: CPU: 3 PID: 4319 at fs/fs-writeback.c:2159
  __mark_inode_dirty+0x268/0x340

Ideally removal should return -EBUSY as block device is mounted after
formatting.  This patch tries to address this checking if whole device
or any partition of it already mounted or not before removal.

Whole device is checked using "bd_super" member of block device.  This
member is always set once block device has been mounted using a
filesystem.  Another member "bd_part_count" takes care of checking any
if any partitions are under use.  "bd_part_count" is only updated
under locks when partitions are opened or closed (first open and last
release).  This at least does take care sending -EBUSY if removal is
being attempted while whole block device or any partition is mounted.

Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 08:34:57 -06:00
Rakesh Pandit
900148296b lightnvm: prevent target type module removal when in use
If target type module e.g. pblk here is unloaded (rmmod) while module
is in use (after creating target) system crashes.  We fix this by
using module API refcnt.

Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 08:34:57 -06:00
Mika Kahola
4d58443ddd drm/i915: Get rid of hardcoded pipes
Favor for_each_pipe() macro when looping through pipes.

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507890286-16214-1-git-send-email-mika.kahola@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-10-13 17:04:58 +03:00
Thierry Reding
277b09cfa3 drm/atomic-helper: Fix reference to drm_crtc_send_vblank_event()
Fix up this reference so that the proper link is generated in the
documentation and so that people don't go chasing after the wrong
function for an embarrassingly long time.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171012140857.9559-1-thierry.reding@gmail.com
2017-10-13 15:41:04 +02:00
Thierry Reding
9ac078159e drm/atomic-helper: Fix typo
Fix "esay-to-use" to "easy-to-use" typo.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171012140616.9002-1-thierry.reding@gmail.com
2017-10-13 15:40:25 +02:00
Geert Uytterhoeven
d67ac3ae3a dt-bindings: iommu: ipmmu-vmsa: Use generic node name
Use the preferred generic node name in the example.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-13 08:39:12 -05:00
Dan Carpenter
0de7d83562 ALSA: hda - silence uninitialized variable warning in activate_amp_in()
If snd_hda_get_conn_list() fails then "conn" isn't initialized.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-13 15:14:44 +02:00
Jérémy Lefaure
a9291f461d ALSA: hda/ca0132 - use ARRAY_SIZE
Using the ARRAY_SIZE macro improves the readability of the code.

Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
 (sizeof(E)@p /sizeof(*E))
|
 (sizeof(E)@p /sizeof(E[...]))
|
 (sizeof(E)@p /sizeof(T))
)

Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-13 15:14:08 +02:00
Ville Syrjälä
9e55446273 drm: Add missing __user annotation to drm_syncobj_array_find()
'user_handles' needs a __user annotation for fix the following sparse
warning:
drm_syncobj.c:813:37: warning: incorrect type in argument 2 (different address spaces)
drm_syncobj.c:813:37:    expected void const [noderef] <asn:1>*from
drm_syncobj.c:813:37:    got void *user_handles
drm_syncobj.c:875:38: warning: incorrect type in argument 2 (different address spaces)
drm_syncobj.c:875:38:    expected void *user_handles
drm_syncobj.c:875:38:    got void [noderef] <asn:1>*<noident>
drm_syncobj.c:908:38: warning: incorrect type in argument 2 (different address spaces)
drm_syncobj.c:908:38:    expected void *user_handles
drm_syncobj.c:908:38:    got void [noderef] <asn:1>*<noident>
drm_syncobj.c:941:38: warning: incorrect type in argument 2 (different address spaces)
drm_syncobj.c:941:38:    expected void *user_handles
drm_syncobj.c:941:38:    got void [noderef] <asn:1>*<noident>

Cc: Jason Ekstrand <jason@jlekstrand.net>
Fixes: 3e6fb72d6c ("drm/syncobj: Add a syncobj_array_find helper")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901165328.24459-2-ville.syrjala@linux.intel.com
Reviewed-by: Thierry Reding <treding@nvidia.com>
2017-10-13 16:01:06 +03:00
Julien Grall
4a40aedec6 DT: arm,gic-v3: Update the ITS size in the examples
Currently, the examples are using 2MB for the ITS size. Per the
specification (section 8.18 in ARM IHI 0069D), the ITS address map is
128KB.

Update the examples to match the specification.

Signed-off-by: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-13 13:43:03 +01:00
Johannes Berg
b1b1ae2c1c mac80211: don't track HT capability changes
The code here (more or less accidentally) tracks the HT capability of
the AP when connected, and we found at least one AP that erroneously
toggles its 20/40 capability bit when changing between 20/40 MHz. The
connection to the AP is then broken because we set the 40 MHz disable
flag based on this, as soon as it switches to 20 MHz, but because the
flag then changed, we disconnect.

I'd be inclined to just ignore this issue, since we then reconnect
while the AP is in 20 MHz mode and never use 40 MHz with it again,
but this code is a bit strange anyway - we don't use the capabilities
for anything else.

Change the code to simply not track the HT capabilities at all, which
assumes that the AP at least sets 20/40 capability when operating in
40 MHz (or higher). If not, rate scaling might end up using only the
narrower bandwidth.

The new behaviour also mirrors what VHT does, where we only check the
VHT operation.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-13 14:29:02 +02:00
Stephen Boyd
44cd3939c1 drm/tilcdc: Remove redundant OF_DETACHED flag setting
of_fdt_unflatten_tree() already sets the flag on this node to
OF_DETACHED, because of_fdt_unflatten_tree() calls
__unflatten_device_tree() with the detached bool set to true.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
2017-10-13 15:25:11 +03:00
Jyri Sarha
ce99f7206c drm/tilcdc: Precalculate total frametime in tilcdc_crtc_set_mode()
We need the total frame refresh time to check if we are too close to
vertical sync when updating the two framebuffer DMA registers and risk
a collision. This new method is more accurate that the previous that
based on mode's vrefresh value, which itself is inaccurate or may not
even be initialized.

Reported-by: Kevin Hao <kexin.hao@windriver.com>
Fixes: 11abbc9f39 ("drm/tilcdc: Set framebuffer DMA address to HW only if CRTC is enabled")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-10-13 15:24:21 +03:00
Arnd Bergmann
88230ef1f3 cfg80211: fix CFG80211_EXTRA_REGDB_KEYDIR typo
The missing CONFIG_ prefix means this macro is never defined,
leading to a possible Kbuild warning:

net/wireless/reg.c:666:20: error: 'load_keys_from_buffer' defined but not used [-Werror=unused-function]
 static void __init load_keys_from_buffer(const u8 *p, unsigned int buflen)

When we use the correct symbol, the warning also goes away.

Fixes: 90a53e4432 ("cfg80211: implement regdb signature checking")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-13 14:08:42 +02:00
Arnd Bergmann
1188e2a9ef cfg80211: don't print log output for building shipped-certs
Building an allmodconfig kernel with 'make -s' now prints a single line:

  GEN     net/wireless/shipped-certs.c

Using '$(kecho)' here will skip the output with 'make -s' but
otherwise keeps printing it, which is consistent with how we
handle all the other output.

Fixes: 90a53e4432 ("cfg80211: implement regdb signature checking")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-13 14:08:35 +02:00
Ben Greear
0a590a3877 ath10k: store coverage-class in case firmware is not booted
This way, we can apply the values when the NIC does come up.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-10-13 15:08:19 +03:00
Miaoqing Pan
ee0a47186e ath9k: fix tx99 potential info leak
When the user sets count to zero the string buffer would remain
completely uninitialized which causes the kernel to parse its
own stack data, potentially leading to an info leak. In addition
to that, the string might be not terminated properly when the
user data does not contain a 0-terminator.

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Reviewed-by: Christoph Böhmwalder <christoph@boehmwalder.at>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-10-13 14:40:57 +03:00
Rajkumar Manoharan
2ea9f12cef ath10k: add new cipher suite support
QCA99x0 and QCA4019 family chips support CCMP-256, GCMP-128, and
GCMP-256 ciphers in hardware, so advertise support for these. As
firmware does not support group management frame ciphers (BIP),
handle them in software (mac80211).

Reviewed-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Cc: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-10-13 14:40:06 +03:00
Venkateswara Naralasetty
36d9cdb6fb ath10k: check power save support in STA mode through FW IE
Currently ath10k host enables power save support in station mode by
default for all firmwares but Power save for station mode still not supported
in some of the firmware versions. Which results in firmware crash while
issueing multiple scan commands.

Fix this problem by introducing new FW feature flag to check power save
support in firmware and then the firmware image can tell to ath10k that power
save mode is not supported in station mode.

Signed-off-by: Venkateswara Naralasetty <vnaralas@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-10-13 14:38:09 +03:00
Brian Norris
96378bd2c6 ath10k: fix core PCI suspend when WoWLAN is supported but disabled
For devices where the FW supports WoWLAN but user-space has not
configured it, we don't do any PCI-specific suspend/resume operations,
because mac80211 doesn't call drv_suspend() when !wowlan. This has
particularly bad effects for some platforms, because we don't stop the
power-save timer, and if this timer goes off after the PCI controller
has suspended the link, Bad Things will happen.

Commit 32faa3f0ee ("ath10k: add the PCI PM core suspend/resume ops")
got some of this right, in that it understood there was a problem on
non-WoWLAN firmware. But it forgot the $subject case.

Fix this by moving all the PCI driver suspend/resume logic exclusively
into the driver PM hooks. This shouldn't affect WoWLAN support much
(this just gets executed later on).

I would just as well kill the entirety of ath10k_hif_suspend(), as it's
not even implemented on the USB or SDIO drivers. I expect that we don't
need the callback, except to return "supported" (i.e., 0) or "not
supported" (i.e., -EOPNOTSUPP).

Fixes: 32faa3f0ee ("ath10k: add the PCI PM core suspend/resume ops")
Fixes: 77258d409c ("ath10k: enable pci soc powersaving")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Cc: Ryan Hsu <ryanhsu@qti.qualcomm.com>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-10-13 14:37:03 +03:00
Kuninori Morimoto
6cba3fa98c ASoC: rsnd: more clear ADG clock debug info
ADG inputs clock from CLK{A,B,C,I} and outputs clock from
CLKOUT{0,1,2,3} which is selected by BRG{A,B}.
Now, ADG is assuming BRGA is for 44100Hz related clocks,
BRGB is for 48000Hz related clocks.

Clock related debug is very difficult/confusable.
This patch cleanups clock related debug info.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-13 11:19:01 +01:00
Arnd Bergmann
a39644b235 rsi: fix integer overflow warning
gcc produces a harmless warning about a recently introduced
signed integer overflow:

drivers/net/wireless/rsi/rsi_91x_hal.c: In function 'rsi_prepare_mgmt_desc':
include/uapi/linux/swab.h:13:15: error: integer overflow in expression [-Werror=overflow]
  (((__u16)(x) & (__u16)0x00ffU) << 8) |   \
   ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
include/uapi/linux/swab.h:104:2: note: in expansion of macro '___constant_swab16'
  ___constant_swab16(x) :   \
  ^~~~~~~~~~~~~~~~~~
include/uapi/linux/byteorder/big_endian.h:34:43: note: in expansion of macro '__swab16'
 #define __cpu_to_le16(x) ((__force __le16)__swab16((x)))
                                           ^~~~~~~~
include/linux/byteorder/generic.h:89:21: note: in expansion of macro '__cpu_to_le16'
 #define cpu_to_le16 __cpu_to_le16
                     ^~~~~~~~~~~~~
drivers/net/wireless/rsi/rsi_91x_hal.c:136:3: note: in expansion of macro 'cpu_to_le16'
   cpu_to_le16((tx_params->vap_id << RSI_DESC_VAP_ID_OFST) &
   ^~~~~~~~~~~

The problem is that the 'mask' value is a signed integer that gets
turned into a negative number when truncated to 16 bits. Making it
an unsigned constant avoids this.

Fixes: eac4eed322 ("rsi: tx and rx path enhancements for p2p mode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13 13:00:42 +03:00
Igor Mitsyanko
ef81e8e9db qtnfmac: do not cache current channel info in driver's state
Linux Wireless device structure already has current channel
information that can be used when needed. Start using it.
Since driver's channel info is not used anymore, remove it.

Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13 12:59:32 +03:00
Igor Mitsyanko
d23d136131 qtnfmac: make encryption info a part of CONNECT command.
Encryption info is a constant part of STA settings, no point
to pass it as an optional TLV.
Remove QTN_TLV_ID_CRYPTO type as it's not used anymore.

Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13 12:59:32 +03:00
Igor Mitsyanko
9766d1dd52 qtnfmac: do not cache BSS state in per-VIF structure
This cached state is used only once immediately after it is
initilized, except for BSSID value that is used for events processing.
There is no reason in keeping unused data in driver's state.

Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13 12:59:31 +03:00
Igor Mitsyanko
d7b80052fa qtnfmac: get rid of QTNF_STATE_AP_START flag
QTNF_STATE_AP_START usage is redundant and imposes additional state
synchronization maintenance. We may as well leave state checking
to network card and upper layers (cfg80211, nl80211 and userspace).

Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13 12:59:31 +03:00
Igor Mitsyanko
524522c445 qtnfmac: get rid of QTNF_STATE_AP_CONFIG
QTNF_STATE_AP_CONFIG is redundant and its usage can be safely removed.

Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13 12:59:30 +03:00
Igor Mitsyanko
f99201cb08 qtnfmac: pass channel definition to WiFi card on START_AP command
Introduce "channel definition" TLV containing full channel
description (center frequence for both segments + BW) and pass it to
wireless card in a payload to START_AP command.

Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13 12:59:30 +03:00
Igor Mitsyanko
8b5f4aa734 qtnfmac: pass all AP settings to wireless card for processing
Modify QLINK START_AP command payload to pass all AP settings
contained within struct cfg80211_ap_settings.
Make most of settings a constant part of "config AP" command
instead of passing it as an optional TLVs.

Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13 12:59:29 +03:00
Igor Mitsyanko
9b692df1e6 qtnfmac: do not cache AP settings in driver structures
Cached AP setings are passed to WiFi card right after they are
initialized and are never used for anything else. There is no
point in keeping them in driver state.

Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13 12:59:28 +03:00
Christos Gkekas
76d7b12cbb rtlwifi: Remove unused cur_rfstate variables
Clean up unused cur_rfstate variables in rtl8188ee, rtl8723ae, rtl8723be
and rtl8821ae.

Signed-off-by: Christos Gkekas <chris.gekas@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13 12:58:11 +03:00
Ping-Ke Shih
84efbad4f8 rtlwifi: Add module parameter ASPM
On some platforms, enable ASPM will cause AER error to be logged, thus
we use a parameter to selectively turn on ASPM.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13 12:43:42 +03:00
Ping-Ke Shih
1d22b17744 rtlwifi: Add bw_update parameter for RA mask update.
- Add new parameter "is_bw_update" to control if current bandwidth setting
  is updated to FW RA.
- After this commit, we keep the same setting as before.
- Later, bandwidth update in watchdog is changed to false for 8822BE.

Signed-off-by: Tsang-Shian Lin <thlin@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13 12:43:41 +03:00
Ping-Ke Shih
aa59a1e7c6 rtlwifi: Remove BAND_NUM and related fields
These fields are unused, and we will define them in phydm later.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13 12:43:41 +03:00
Ping-Ke Shih
08ab7465f3 rtlwifi: Add RSSI and RF type to wifi.h for phydm
These definition will be used by phydm later.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13 12:43:40 +03:00
Ping-Ke Shih
74451b935c rtlwifi: Add TX/RX throughput statistics in period
The statistic variables use u64 to get higher precision.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13 12:43:40 +03:00
Ping-Ke Shih
c1816f1709 rtlwifi: Add rtl_get_hal_edca_param() to generate register's format of EDCA.
Convert from the value of ieee80211_tx_queue_params to Realtek's
register value.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13 12:43:39 +03:00
Ping-Ke Shih
cdc9c7a032 rtlwifi: Implement rtl_get_tx_hw_rate to yield correct hw_rate
Originally, we get legacy rate only, so we extend to get HT and VHT rate.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13 12:43:39 +03:00
Ping-Ke Shih
0c07bd7457 rtlwifi: rtl8192ee: Make driver support 64bits DMA.
1. Both 32-bit and 64-bit use the same TX/RX buffer desc layout
2. Extend set_desc() and get_desc() to set and get 64-bit address
3. Remove directive DMA_IS_64BIT
4. Add module parameter to turn on 64-bit dma

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13 12:43:38 +03:00
Ping-Ke Shih
ecf4000e0d rtlwifi: Remove redundant semicolon in wifi.h.
The semicolon can cause compiler error, if it exists in if...else
statement.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13 12:43:37 +03:00
Ping-Ke Shih
f06eb3f9c0 rtlwifi: Fix MAX MPDU of VHT capability
We must choose only one of VHT_CAP among
IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895,
IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 and
IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13 12:43:37 +03:00
Keerthy
b2b3adc93e mfd: tps65218: Introduce dependency on CONFIG_OF
Currently the driver boots only via device tree hence add a
dependency on CONFIG_OF. This leaves with a bunch of unused code
so clean that up.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-10-13 10:42:59 +01:00
Keerthy
8f76af65a5 mfd: tps65218: Correct the config description
When the initial support was added for this PMIC was added
only regulator support was present. Now we have GPIO and Powerbutton
support as well. Hence correct the description of MFD_TPS65218 config
option.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-10-13 10:42:59 +01:00
Steve Twiss
69075af672 MAINTAINERS: Fix Dialog search term for watchdog binding file
Commit 340267640d ("MAINTAINERS: da9062/61 updates to the Dialog
Semiconductor search terms") contained a typo for the watchdog binding:
da92??-wdt.txt should have read da90??-wdt.txt. This new commit will fix
the error and allows Dialog Semiconductor to follow files for PMIC
bindings correctly.

Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-10-13 10:42:59 +01:00
Martin Kaiser
f132bc3f30 mfd: fsl-imx25: Set irq handler and data in one go
Replace the two separate calls for setting the irq handler and data with
a single irq_set_chained_handler_and_data() call.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-10-13 10:42:59 +01:00
Rui Feng
8275b77a15 mfd: rts5249: Add support for RTS5250S power saving
Enable power saving for RTS5250S as following steps:
1.Set 0xFE58 to enable clock power management.
2.Check cfg space whether support L1SS or not.
3.If support L1SS, set 0xFF03 to free clkreq.
4.When entering idle status, enable aspm
  and set parameters for L1SS and LTR.
5.Wnen entering run status, disable aspm
  and set parameters for L1SS and LTR.
If entering L1SS mode successfully,
electric current will be below 2mA.

Signed-off-by: Rui Feng <rui_feng@realsil.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-10-13 10:42:59 +01:00