Commit graph

932,869 commits

Author SHA1 Message Date
Jaejoong Kim
f043bfc98c HID: usbhid: fix out-of-bounds bug
The hid descriptor identifies the length and type of subordinate
descriptors for a device. If the received hid descriptor is smaller than
the size of the struct hid_descriptor, it is possible to cause
out-of-bounds.

In addition, if bNumDescriptors of the hid descriptor have an incorrect
value, this can also cause out-of-bounds while approaching hdesc->desc[n].

So check the size of hid descriptor and bNumDescriptors.

	BUG: KASAN: slab-out-of-bounds in usbhid_parse+0x9b1/0xa20
	Read of size 1 at addr ffff88006c5f8edf by task kworker/1:2/1261

	CPU: 1 PID: 1261 Comm: kworker/1:2 Not tainted
	4.14.0-rc1-42251-gebb2c2437d80 #169
	Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
	Workqueue: usb_hub_wq hub_event
	Call Trace:
	__dump_stack lib/dump_stack.c:16
	dump_stack+0x292/0x395 lib/dump_stack.c:52
	print_address_description+0x78/0x280 mm/kasan/report.c:252
	kasan_report_error mm/kasan/report.c:351
	kasan_report+0x22f/0x340 mm/kasan/report.c:409
	__asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427
	usbhid_parse+0x9b1/0xa20 drivers/hid/usbhid/hid-core.c:1004
	hid_add_device+0x16b/0xb30 drivers/hid/hid-core.c:2944
	usbhid_probe+0xc28/0x1100 drivers/hid/usbhid/hid-core.c:1369
	usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
	really_probe drivers/base/dd.c:413
	driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
	__device_attach_driver+0x230/0x290 drivers/base/dd.c:653
	bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
	__device_attach+0x26e/0x3d0 drivers/base/dd.c:710
	device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
	bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
	device_add+0xd0b/0x1660 drivers/base/core.c:1835
	usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932
	generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174
	usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266
	really_probe drivers/base/dd.c:413
	driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
	__device_attach_driver+0x230/0x290 drivers/base/dd.c:653
	bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
	__device_attach+0x26e/0x3d0 drivers/base/dd.c:710
	device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
	bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
	device_add+0xd0b/0x1660 drivers/base/core.c:1835
	usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457
	hub_port_connect drivers/usb/core/hub.c:4903
	hub_port_connect_change drivers/usb/core/hub.c:5009
	port_event drivers/usb/core/hub.c:5115
	hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195
	process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119
	worker_thread+0x221/0x1850 kernel/workqueue.c:2253
	kthread+0x3a1/0x470 kernel/kthread.c:231
	ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431

Cc: stable@vger.kernel.org
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-10-11 15:40:31 +02:00
Ulf Hansson
0e708fc602 PM / sleep: Remove pm_complete_with_resume_check()
According to recent changes for ACPI, the are longer any users of
pm_complete_with_resume_check(), thus let's drop it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-11 15:40:29 +02:00
Rafael J. Wysocki
8af4b3d704 Merge branch 'acpi-pm' into pm-sleep 2017-10-11 15:39:38 +02:00
Joe Lawrence
ef8daf8eeb livepatch: unpatch all klp_objects if klp_module_coming fails
When an incoming module is considered for livepatching by
klp_module_coming(), it iterates over multiple patches and multiple
kernel objects in this order:

	list_for_each_entry(patch, &klp_patches, list) {
		klp_for_each_object(patch, obj) {

which means that if one of the kernel objects fails to patch,
klp_module_coming()'s error path needs to unpatch and cleanup any kernel
objects that were already patched by a previous patch.

Reported-by: Miroslav Benes <mbenes@suse.cz>
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-10-11 15:38:46 +02:00
Srinivas Pandruvada
eeb2d80d50 ACPI / LPIT: Add Low Power Idle Table (LPIT) support
Add functionality to read LPIT table, which provides:

 - Sysfs interface to read residency counters via
   /sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us
   /sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us

Here the count "low_power_idle_cpu_residency_us" shows the time spent
by CPU package in low power state.  This is read via MSR interface,
which points to MSR for PKG C10.

Here the count "low_power_idle_system_residency_us" show the count the
system was in low power state. This is read via MMIO interface. This
is mapped to SLP_S0 residency on modern Intel systems. This residency
is achieved only when CPU is in PKG C10 and all functional blocks are
in low power state.

It is possible that none of the above counters present or anyone of the
counter present or all counters present.

For example: On my Kabylake system both of the above counters present.
After suspend to idle these counts updated and prints:

 6916179
 6998564

This counter can be read by tools like turbostat to display. Or it can
be used to debug, if modern systems are reaching desired low power state.

 - Provides an interface to read residency counter memory address

   This address can be used to get the base address of PMC memory
   mapped IO.  This is utilized by intel_pmc_core driver to print
   more debug information.

In addition, to avoid code duplication to read iomem, removed the read of
iomem from acpi_os_read_memory() in osl.c and made a common function
acpi_os_read_iomem(). This new function is used for reading iomem in
in both osl.c and acpi_lpit.c.

Link: http://www.uefi.org/sites/default/files/resources/Intel_ACPI_Low_Power_S0_Idle.pdf
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-11 15:38:10 +02:00
Ulf Hansson
c2ebf788f9 ACPI / PM: Split code validating need for runtime resume in ->prepare()
Move the code dealing with validation of whether runtime resuming the
device is needed during system suspend.

In this way it becomes more clear for what circumstances ACPI is prevented
from trying the direct_complete path.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-11 15:35:50 +02:00
Ulf Hansson
e4da817d2a ACPI / PM: Restore acpi_subsys_complete()
Commit 58a1fbbb2e (PM / PCI / ACPI: Kick devices that might have
been reset by firmware), made PCI's and ACPI's ->complete() callbacks
to be assigned to a new API called pm_complete_with_resume_check(),
which was introduced in the same change.

Later it turned out that using pm_complete_with_resume_check() wasn't
good enough for PCI, as it needed additional PCI specific checks,
before deciding whether runtime resuming the device is needed when
running the ->complete() callback.

This leaves ACPI as the only user of pm_complete_with_resume_check().
Therefore let's restore ACPI's acpi_subsys_complete(), which was
dropped in commit 58a1fbbb2e (PM / PCI / ACPI: Kick devices that
might have been reset by firmware).

This enables us to remove the pm_complete_with_resume_check() API in
a following change, but it also enables ACPI to add more ACPI
specific checks in acpi_subsys_complete() if that turns out to be
necessary.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-11 15:34:28 +02:00
Rafael J. Wysocki
63705c406a ACPI / PM: Combine two identical device resume routines
Notice that acpi_dev_runtime_resume() and acpi_dev_resume_early() are
actually literally identical after some more-or-less recent changes,
so rename acpi_dev_runtime_resume() to acpi_dev_resume(), use it
everywhere instead of acpi_dev_resume_early() and drop the latter.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-11 15:31:55 +02:00
Johan Hovold
9eabd28e8b USB: serial: garmin_gps: simplify init-session logic
Clean up the somewhat convoluted init-session logic to improve
readability.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
2017-10-11 15:25:00 +02:00
Johan Hovold
c1a357b686 USB: serial: garmin_gps: clean up init-session messages
Use the port device for any init-session error and debug messages,
remove one redundant debug message and simplify one error message.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
2017-10-11 15:24:55 +02:00
Johan Hovold
b943cee8a5 USB: serial: garmin_gps: drop unused timer initialisation
Drop out-commented timer expiry initialisation which would not even
compile anymore.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
2017-10-11 15:24:49 +02:00
Johan Hovold
74d471b598 USB: serial: garmin_gps: fix memory leak on probe errors
Make sure to free the port private data before returning after a failed
probe attempt.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
2017-10-11 15:24:42 +02:00
Johan Hovold
19a565d9af USB: serial: garmin_gps: fix I/O after failed probe and remove
Make sure to stop any submitted interrupt and bulk-out URBs before
returning after failed probe and when the port is being unbound to avoid
later NULL-pointer dereferences in the completion callbacks.

Also fix up the related and broken I/O cancellation on failed open and
on close. (Note that port->write_urb was never submitted.)

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>	# 51a2f077 ("USB: introduce usb_anchor")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
2017-10-11 15:24:22 +02:00
Kees Cook
0ee32774ae HID: usbhid: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
(introduced by 686fef928b ("timer: Prepare to change timer callback
argument type")) to pass the timer pointer explicitly. Adds pointer back to
hid_device for multitouch.

[jkosina@suse.cz: extend changelog a little bit as asked for by Benjamin]
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-10-11 15:22:15 +02:00
Jason Gerecke
2f84723de7 Revert "HID: wacom: generic: Send BTN_TOOL_PEN in prox once the pen enters range"
This reverts commit 3e70969e44.

This commit causes a few problems for userspace. The most noteworthy are
problems related to the distinguishing of different pens and pointer jumps
when entering proximity. Userspace is written with the expectation that a
pen will provide its tool ID and serial number (if available) in the very
first in-prox report. By sending BTN_TOOL_PEN when the tablet starts
communicating rather than waiting until a tool ID/serial number is
available, userspace ends up treating all pens as being the same and
lacking a serial number. Similarly, userspace assumes that the first
report will contain X/Y data, but by marking the pen as being in-prox
without an X/Y coordinate, userspace ends up warping the pen to the last-
known X/Y location. As of commit 5b40104edf ("HID: wacom: generic: Reset
events back to zero when pen leaves") this means warping to (0,0).

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-10-11 15:17:35 +02:00
Takashi Iwai
738d9edcfd ALSA: usb-audio: Add sanity checks for invalid EPs
USB-audio driver may set up a URB containing the fixed EP without
validating its presence for some non-class-compliant devices.  This
may end up with an oops-like kernel warning when submitted.

For avoiding it, this patch adds the call of the new sanity-check
helper for URBs.  The checks are needed only for MIDI I/O as the other
places have already some other checks.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-11 15:14:51 +02:00
Takashi Iwai
2a4340c577 ALSA: line6: Add a sanity check for invalid EPs
As syzkaller spotted, currently line6 drivers submit a URB with the
fixed EP without checking whether it's actually available, which may
result in a kernel warning like:
  usb 1-1: BOGUS urb xfer, pipe 3 != type 1
  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 24 at drivers/usb/core/urb.c:449
  usb_submit_urb+0xf8a/0x11d0
  Modules linked in:
  CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc2-42613-g1488251d1a98 #238
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Workqueue: usb_hub_wq hub_event
  Call Trace:
   line6_start_listen+0x55f/0x9e0 sound/usb/line6/driver.c:82
   line6_init_cap_control sound/usb/line6/driver.c:690
   line6_probe+0x7c9/0x1310 sound/usb/line6/driver.c:764
   podhd_probe+0x64/0x70 sound/usb/line6/podhd.c:474
   usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
   ....

This patch adds a sanity check of validity of EPs at the device
initialization phase for avoiding the call with an invalid EP.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-11 15:14:50 +02:00
Takashi Iwai
58fc7f73a8 ALSA: caiaq: Add a sanity check for invalid EPs
As syzkaller spotted, currently caiaq driver submits a URB with the
fixed EP without checking whether it's actually available, which may
result in a kernel warning like:
  usb 1-1: BOGUS urb xfer, pipe 3 != type 1
  ------------[ cut here ]------------
  WARNING: CPU: 1 PID: 1150 at drivers/usb/core/urb.c:449
  usb_submit_urb+0xf8a/0x11d0
  Modules linked in:
  CPU: 1 PID: 1150 Comm: kworker/1:1 Not tainted
  4.14.0-rc2-42660-g24b7bd59eec0 #277
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Workqueue: usb_hub_wq hub_event
  Call Trace:
   init_card sound/usb/caiaq/device.c:467
   snd_probe+0x81c/0x1150 sound/usb/caiaq/device.c:525
   usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
   ....

This patch adds a sanity check of validity of EPs at the device
initialization phase for avoiding the call with an invalid EP.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-11 15:14:50 +02:00
Takashi Iwai
6815a0b444 ALSA: bcd2000: Add a sanity check for invalid EPs
As syzkaller spotted, currently bcd2000 driver submits a URB with the
fixed EP without checking whether it's actually available, which may
result in a kernel warning like:
  usb 1-1: BOGUS urb xfer, pipe 1 != type 3
  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 1846 at drivers/usb/core/urb.c:449
  usb_submit_urb+0xf8a/0x11d0
  Modules linked in:
  CPU: 0 PID: 1846 Comm: kworker/0:2 Not tainted
  4.14.0-rc2-42613-g1488251d1a98 #238
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Workqueue: usb_hub_wq hub_event
  Call Trace:
   bcd2000_init_device sound/usb/bcd2000/bcd2000.c:289
   bcd2000_init_midi sound/usb/bcd2000/bcd2000.c:345
   bcd2000_probe+0xe64/0x19e0 sound/usb/bcd2000/bcd2000.c:406
   usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
   ....

This patch adds a sanity check of validity of EPs at the device
initialization phase for avoiding the call with an invalid EP.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-11 15:14:49 +02:00
Takashi Iwai
e901b98738 usb: core: Add a helper function to check the validity of EP type in URB
This patch adds a new helper function to perform a sanity check of the
given URB to see whether it contains a valid endpoint.  It's a light-
weight version of what usb_submit_urb() does, but without the kernel
warning followed by the stack trace, just returns an error code.

Especially for a driver that doesn't parse the descriptor but fills
the URB with the fixed endpoint (e.g. some quirks for non-compliant
devices), this kind of check is preferable at the probe phase before
actually submitting the urb.

Tested-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-11 15:14:32 +02:00
Takashi Iwai
c44027c89e ALSA: add snd_card_disconnect_sync()
In case of user unbind ALSA driver during playing back / capturing,
each driver needs to stop and remove it correctly. One note here is
that we can't cancel from remove function in such case, because
unbind operation doesn't check return value from remove function.
So, we *must* stop and remove in this case.

For this purpose, we need to sync (= wait) until the all top-level
operations are canceled at remove function.
For example, snd_card_free() processes the disconnection procedure at
first, then waits for the completion. That's how the hot-unplug works
safely. It's implemented, at least, in the top-level driver removal.

Now for the lower level driver, we need a similar strategy. Notify to
the toplevel for hot-unplug (disconnect in ALSA), and sync with the
stop operation, then continue the rest of its own remove procedure.

This patch adds snd_card_disconnect_sync(), and driver can use it from
remove function.

Note: the "lower level" driver here refers to a middle layer driver
(e.g. ASoC components) that can be unbound freely during operation.
Most of legacy ALSA helper drivers don't have such a problem because
they can't be unbound.

Note#2: snd_card_disconnect_sync() merely calls snd_card_disconnect()
and syncs with closing all pending files.  It takes only the files
opened by user-space into account, and doesn't care about object
refcounts.  (The latter is handled by snd_card_free() completion call,
BTW.)  Also, the function doesn't free resources by itself.

Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-11 15:06:10 +02:00
Johannes Berg
90a53e4432 cfg80211: implement regdb signature checking
Currently CRDA implements the signature checking, and the previous
commits added the ability to load the whole regulatory database
into the kernel.

However, we really can't lose the signature checking, so implement
it in the kernel by loading a detached signature (regulatory.db.p7s)
and check it against built-in keys.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-11 14:24:24 +02:00
Chen-Yu Tsai
8b1447aed5 ARM: dts: sun6i: Enable HDMI support on some A31/A31s devices
All the A31/A31s devices I own have some kind of HDMI connector wired
to the dedicated HDMI pins on the SoC:

  - A31 Hummingbird (standard HDMI connector, display already enabled)
  - Sinlinx SinA31s (standard HDMI connector)
  - MSI Primo81 tablet (micro HDMI connector)

Enable the display pipeline (if needed) and HDMI output for them.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-11 20:08:11 +08:00
Chen-Yu Tsai
026b89cec3 ARM: dts: sun6i: Add device node for HDMI controller
Now that we support the HDMI controller on the A31 SoC, we can add it
to the device tree.

This adds a device node for the HDMI controller, and the of_graph nodes
connecting it to the 2 TCONs.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-11 20:08:03 +08:00
Daniel Vetter
7c0f24a4c4 regmap: Add field polling macro
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlnUvBgTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0AuJB/4u17LCa8PBI7pz0LVr7zwj3AEBZrAb
 zq/wqlrqZOhyLEfHtLI/So5LyIFYaF7MZJfylHBp6OiDIXEXzee3qLOc5mQB2jnv
 BSnH2Ors658o5TCDm1W0xtHXkujAr7MlaV7Wkaw4lLiq3OeNo8lYMdLVW4tLXf0d
 ib7hOsO6idt1H8DRYXlrVrGA7Fz8/m2YYahceAOyLAgLxlepoZGJ1xJxMfqr+ZVs
 c85y2JoGWFr0Ac/8E/TZUIuONF4forpaWwI1+/0zCfdNLmG9ceAFxiPPIluAGkeO
 EyZzahspaFHa0j+/WrOUlB6YcXPY69pUo89kzHYn7ugBrmGoAMtnLnsN
 =BA1X
 -----END PGP SIGNATURE-----

Merge tag 'regmap-poll-field' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into drm-misc-next

regmap: Add field polling macro

Requested by Maxime Ripard to make sun4i compile again (next time
the other way round is better).

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004104732.jkps4ufekfizcrkz@sirena.co.uk
2017-10-11 13:22:51 +02:00
Johannes Berg
c8c240e284 cfg80211: reg: remove support for built-in regdb
Parsing and building C structures from a regdb is no longer needed
since the "firmware" file (regulatory.db) can be linked into the
kernel image to achieve the same effect.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-11 13:18:51 +02:00
Aishwarya Pant
0c17151aaa drm/msm/mdp5: remove less than 0 comparison for unsigned value
pipe is an unsigned int and less than zero comparison for unsigned
values is always false.

Detected using the following cocci script:

@@
unsigned int i;
@@
* i < 0

Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010184207.iv3dinrtwvbv7fei@aishwarya
2017-10-11 13:17:52 +02:00
Maciej Purski
e25f1f7c94 drm/bridge/sii8620: add remote control support
MHL specification defines Remote Control Protocol(RCP) to
send input events between MHL devices.
The driver now recognizes RCP messages and reacts to them
by reporting key events to input subsystem, allowing
a user to control a device using TV remote control.

Signed-off-by: Maciej Purski <m.purski@samsung.com>
Acked-by: Sean Young <sean@mess.org>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1503565087-19730-1-git-send-email-m.purski@samsung.com
2017-10-11 13:14:25 +02:00
Johannes Berg
1ea4ff3e9f cfg80211: support reloading regulatory database
If the regulatory database is loaded, and then updated, it may
be necessary to reload it. Add an nl80211 command to do this.

Note that this just reloads the database, it doesn't re-apply
the rules from it immediately.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-11 13:04:15 +02:00
Johannes Berg
007f6c5e6e cfg80211: support loading regulatory database as firmware file
As the current regulatory database is only about 4k big, and already
difficult to extend, we decided that overall it would be better to
get rid of the complications with CRDA and load the database into the
kernel directly, but in a new format that is extensible.

The new file format can be extended since it carries a length field
on all the structs that need to be extensible.

In order to be able to request firmware when the module initializes,
move cfg80211 from subsys_initcall() to the later fs_initcall(); the
firmware loader is at the same level but linked earlier, so it can
be called from there. Otherwise, when both the firmware loader and
cfg80211 are built-in, the request will crash the kernel. We also
need to be before device_initcall() so that cfg80211 is available
for devices when they initialize.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-11 13:04:15 +02:00
Alan Stern
7c80f9e4a5 usb: usbtest: fix NULL pointer dereference
If the usbtest driver encounters a device with an IN bulk endpoint but
no OUT bulk endpoint, it will try to dereference a NULL pointer
(out->desc.bEndpointAddress).  The problem can be solved by adding a
missing test.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-11 13:15:11 +03:00
Andrew Gabbasov
ff74745e6d usb: gadget: configfs: Fix memory leak of interface directory data
Kmemleak checking configuration reports a memory leak in
usb_os_desc_prepare_interf_dir function when rndis function
instance is freed and then allocated again. For example, this
happens with FunctionFS driver with RNDIS function enabled
when "ffs-test" test application is run several times in a row.

The data for intermediate "os_desc" group for interface directories
is allocated as a single VLA chunk and (after a change of default
groups handling) is not ever freed and actually not stored anywhere
besides inside a list of default groups of a parent group.

The fix is to make usb_os_desc_prepare_interf_dir function return
a pointer to allocated data (as a pointer to the first VLA item)
instead of (an unused) integer and to make the caller component
(currently the only one is RNDIS function) responsible for storing
the pointer and freeing the memory when appropriate.

Fixes: 1ae1602de0 ("configfs: switch ->default groups to a linked list")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-11 13:14:37 +03:00
Andrew Gabbasov
aec17e1e24 usb: gadget: composite: Fix use-after-free in usb_composite_overwrite_options
KASAN enabled configuration reports an error

    BUG: KASAN: use-after-free in usb_composite_overwrite_options+...
                [libcomposite] at addr ...
    Read of size 1 by task ...

when some driver is un-bound and then bound again.
For example, this happens with FunctionFS driver when "ffs-test"
test application is run several times in a row.

If the driver has empty manufacturer ID string in initial static data,
it is then replaced with generated string. After driver unbinding
the generated string is freed, but the driver data still keep that
pointer. And if the driver is then bound again, that pointer
is re-used for string emptiness check.

The fix is to clean up the driver string data upon its unbinding
to drop the pointer to freed memory.

Fixes: cc2683c318 ("usb: gadget: Provide a default implementation of default manufacturer string")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-11 13:14:30 +03:00
Dan Carpenter
cb84f56861 usb: misc: usbtest: Fix overflow in usbtest_do_ioctl()
There used to be a test against "if (param->sglen > MAX_SGLEN)" but it
was removed during a refactor.  It leads to an integer overflow and a
stack overflow in test_queue() if we try to create a too large urbs[]
array on the stack.

There is a second integer overflow in test_queue() as well if
"param->iterations" is too high.  I don't immediately see that it's
harmful but I've added a check to prevent it and silence the static
checker warning.

Fixes: 18fc4ebdc7 ("usb: misc: usbtest: Remove timeval usage")
Acked-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-11 13:14:09 +03:00
Kazuya Mizuguchi
29c7f3e68e usb: renesas_usbhs: Fix DMAC sequence for receiving zero-length packet
The DREQE bit of the DnFIFOSEL should be set to 1 after the DE bit of
USB-DMAC on R-Car SoCs is set to 1 after the USB-DMAC received a
zero-length packet. Otherwise, a transfer completion interruption
of USB-DMAC doesn't happen. Even if the driver changes the sequence,
normal operations (transmit/receive without zero-length packet) will
not cause any side-effects. So, this patch fixes the sequence anyway.

Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
[shimoda: revise the commit log]
Fixes: e73a9891b3 ("usb: renesas_usbhs: add DMAEngine support")
Cc: <stable@vger.kernel.org> # v3.1+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-11 13:13:52 +03:00
Alan Stern
ab219221a5 USB: dummy-hcd: Fix deadlock caused by disconnect detection
The dummy-hcd driver calls the gadget driver's disconnect callback
under the wrong conditions.  It should invoke the callback when Vbus
power is turned off, but instead it does so when the D+ pullup is
turned off.

This can cause a deadlock in the composite core when a gadget driver
is unregistered:

[   88.361471] ============================================
[   88.362014] WARNING: possible recursive locking detected
[   88.362580] 4.14.0-rc2+ #9 Not tainted
[   88.363010] --------------------------------------------
[   88.363561] v4l_id/526 is trying to acquire lock:
[   88.364062]  (&(&cdev->lock)->rlock){....}, at: [<ffffffffa0547e03>] composite_disconnect+0x43/0x100 [libcomposite]
[   88.365051]
[   88.365051] but task is already holding lock:
[   88.365826]  (&(&cdev->lock)->rlock){....}, at: [<ffffffffa0547b09>] usb_function_deactivate+0x29/0x80 [libcomposite]
[   88.366858]
[   88.366858] other info that might help us debug this:
[   88.368301]  Possible unsafe locking scenario:
[   88.368301]
[   88.369304]        CPU0
[   88.369701]        ----
[   88.370101]   lock(&(&cdev->lock)->rlock);
[   88.370623]   lock(&(&cdev->lock)->rlock);
[   88.371145]
[   88.371145]  *** DEADLOCK ***
[   88.371145]
[   88.372211]  May be due to missing lock nesting notation
[   88.372211]
[   88.373191] 2 locks held by v4l_id/526:
[   88.373715]  #0:  (&(&cdev->lock)->rlock){....}, at: [<ffffffffa0547b09>] usb_function_deactivate+0x29/0x80 [libcomposite]
[   88.374814]  #1:  (&(&dum_hcd->dum->lock)->rlock){....}, at: [<ffffffffa05bd48d>] dummy_pullup+0x7d/0xf0 [dummy_hcd]
[   88.376289]
[   88.376289] stack backtrace:
[   88.377726] CPU: 0 PID: 526 Comm: v4l_id Not tainted 4.14.0-rc2+ #9
[   88.378557] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[   88.379504] Call Trace:
[   88.380019]  dump_stack+0x86/0xc7
[   88.380605]  __lock_acquire+0x841/0x1120
[   88.381252]  lock_acquire+0xd5/0x1c0
[   88.381865]  ? composite_disconnect+0x43/0x100 [libcomposite]
[   88.382668]  _raw_spin_lock_irqsave+0x40/0x54
[   88.383357]  ? composite_disconnect+0x43/0x100 [libcomposite]
[   88.384290]  composite_disconnect+0x43/0x100 [libcomposite]
[   88.385490]  set_link_state+0x2d4/0x3c0 [dummy_hcd]
[   88.386436]  dummy_pullup+0xa7/0xf0 [dummy_hcd]
[   88.387195]  usb_gadget_disconnect+0xd8/0x160 [udc_core]
[   88.387990]  usb_gadget_deactivate+0xd3/0x160 [udc_core]
[   88.388793]  usb_function_deactivate+0x64/0x80 [libcomposite]
[   88.389628]  uvc_function_disconnect+0x1e/0x40 [usb_f_uvc]

This patch changes the code to test the port-power status bit rather
than the port-connect status bit when deciding whether to isue the
callback.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: David Tulloh <david@tulloh.id.au>
CC: <stable@vger.kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-11 13:13:26 +03:00
Jon Hunter
203f44c475 usb: phy: tegra: Fix phy suspend for UDC
Commit dfebb5f43a ("usb: chipidea: Add support for Tegra20/30/114/124")
added UDC support for Tegra but with UDC support enabled, is was found
that Tegra30, Tegra114 and Tegra124 would hang on entry to suspend.

The hang occurred during the suspend of the USB PHY when the Tegra PHY
driver attempted to disable the PHY clock. The problem is that before
the Tegra PHY driver is suspended, the chipidea driver already disabled
the PHY clock and when the Tegra PHY driver suspended, it could not read
DEVLC register and caused the device to hang.

The Tegra USB PHY driver is used by both the Tegra EHCI driver and now
the chipidea UDC driver and so simply removing the disabling of the PHY
clock from the USB PHY driver would not work for the Tegra EHCI driver.
Fortunately, the status of the USB PHY clock can be read from the
USB_SUSP_CTRL register and therefore, to workaround this issue, simply
poll the register prior to disabling the clock in USB PHY driver to see
if clock gating has already been initiated. Please note that it can take
a few uS for the clock to disable and so simply reading this status
register once on entry is not sufficient.

Similarly when turning on the PHY clock, it is possible that the clock
is already enabled or in the process of being enabled, and so check for
this when enabling the PHY.

Please note that no issues are seen with Tegra20 because it has a slightly
different PHY to Tegra30/114/124.

Fixes: dfebb5f43a ("usb: chipidea: Add support for Tegra20/30/114/124")
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-11 13:13:07 +03:00
Alan Stern
c9f20aafc9 USB: dummy-hcd: remove unsupported isochronous endpoints
The dummy-hcd driver doesn't support emulation of isochronous
transfers.  Therefore it doesn't need to export isochronous endpoint
descriptors; they can be commented out.

Also, the comments in the source code don't express clearly enough the
fact that isochronous isn't supported.  They need to be more explicit.

Finally, change the error status value we use (in theory) for
isochronous URBs.  checkpatch complains about ENOSYS; EINVAL is more
appropriate (it is documented to mean "ISO madness").

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-11 13:07:46 +03:00
Alan Stern
ffc4ea79bc USB: dummy-hcd: bandwidth limits for non-bulk transfers
Part of the emulation performed by dummy-hcd is accounting for
bandwidth utilization.  The total amount of data transferred in a
single frame is supposed to be no larger than an actual USB connection
could accommodate.

Currently the driver performs bandwidth limiting only for bulk
transfers; control and periodic transfers are effectively unlimited.
(Presumably drivers were not expected to request extremely large
control or interrupt transfers.)  This patch improves the situation
somewhat by restricting them as well.

The emulation still isn't perfect.  On a real system, even 0-length
transfers use some bandwidth because of transaction overhead
(IN, OUT, ACK, NACK packets) and packet overhead (SYNC, PID, bit
stuffing, CRC, EOP).  Adding in those factors is left as an exercise
for a later patch.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-11 13:07:35 +03:00
Lucas Stach
11aff4b4c7 gpu: ipu-v3: pre: implement workaround for ERR009624
The PRE has a bug where a software write to the CTRL register can block
the setting of the ENABLE bit by the hardware in auto repeat mode. When
this happens the PRE will fail to handle new jobs. To work around this
software must not write to CTRL register when the PRE store engine is
inside the unsafe window, where a hardware update to the ENABLE bit
may happen.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
[p.zabel@pengutronix.de: rebased before PRE tiled prefetch support]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-10-11 12:04:24 +02:00
Lucas Stach
263c3b8044 gpu: ipu-v3: prg: wait for double buffers to be filled on channel startup
Wait for both double buffer to be filled when first starting a channel.
This makes channel startup a lot more reliable, probably because it allows
the internal state machine to settle before the requests from the IPU are
coming in.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
[p.zabel@pengutronix.de: rebased before switch to runtime PM]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-10-11 12:04:23 +02:00
Jan Kara
8af634ff9e ext2: Fix possible sleep in atomic during mount option parsing
match_int() used in mount option parsing can allocate memory using
GFP_KERNEL and thus sleep. Avoid parsing mount options with sbi->s_lock
held.

Signed-off-by: Jan Kara <jack@suse.cz>
2017-10-11 11:43:24 +02:00
Jan Kara
088519572c ext2: Parse mount options into a dedicated structure
Instead of parsing mount options directly into the superblock (and
restoring options in case of error), parse the options into a dedicated
structure and only copy everything when we know we can safely switch
options. This will allow us to simplify locking and do option parsing
without holding sb->s_lock.

Signed-off-by: Jan Kara <jack@suse.cz>
2017-10-11 11:43:24 +02:00
Kuninori Morimoto
7b9e64a657 pinctrl: sh-pfc: r8a77995: Add Audio SSI pin support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-11 11:34:03 +02:00
Kuninori Morimoto
6e7b1ee885 pinctrl: sh-pfc: r8a77995: Add Audio clock pin support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-11 11:34:03 +02:00
Wolfram Sang
94888a4dc3 pinctrl: sh-pfc: r8a7796: Fix trivial typo in comment
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-11 11:34:02 +02:00
Wolfram Sang
bf3278feae pinctrl: sh-pfc: r8a7795-es1: Fix trivial typo in comment
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-11 11:34:02 +02:00
Wolfram Sang
ecd54509a2 pinctrl: sh-pfc: r8a7795: Fix trivial typo in comment
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-11 11:34:01 +02:00
Wolfram Sang
7a362e3488 pinctrl: sh-pfc: r8a7795: Add HSCIF pins, groups, and functions
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-11 11:34:01 +02:00
Takeshi Kihara
b014912f6c pinctrl: sh-pfc: r8a7796: Add support for INTC-EX IRQ pins
Most pins on the r8a7796 SoC can be configured in GPIO mode for
interrupt and GPIO functionality, while a couple of them can also
be routed to the INTC-EX hardware block (formerly known as IRQC).

On r8a7795 the INTC-EX hardware handles pins IRQ0 -> IRQ5 and
this patch adds support for them to the PFC driver as "intc_ex_irqN".

[takeshi.kihara.df: Ported from commit bb46f6f3f3 ("pinctrl: sh-pfc:
 r8a7795: Add support for INTC-EX IRQ pins")
 to drivers/pinctrl/sh-pfc/pfc-r8a7796.c]
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-11 11:34:00 +02:00