Several minor adjustments at the kernel-doc markups:
- some syntax fixes;
- some cross-references;
- add cross-references for the mentioned ioctls;
- some constants marked as such.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are several functions at the dvbdev that are common to all
digital TV device nodes with aren't documented.
Add documentation for them. No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Enums can be documented via kernel-doc. So, convert the
DVB_DEVICE_* macros to an enum.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are several problems with regards to the return of
FE_SET_PROPERTY. The original idea were to return per-property
return codes via tvp->result field, and to return an updated
set of values.
However, that never worked. What's actually implemented is:
- the FE_SET_PROPERTY implementation doesn't call .get_frontend
callback in order to get the actual parameters after return;
- the tvp->result field is only filled if there's no error.
So, it is always filled with zero;
- FE_SET_PROPERTY doesn't call memdup_user() nor any other
copy_to_user() function. So, any changes to the properties
will be lost;
- FE_SET_PROPERTY is declared as a write-only ioctl (IOW).
While we could fix the above, it could cause regressions.
So, let's just assume what the code really does, updating
the documentation accordingly and removing the logic that
would update the discarded tvp->result.
Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Two readonly ioctls can't be allowed if the frontend device
is opened in read only mode. Explain why.
Reviewed by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are too much tabs on several properties, for no good
reason. That sounds confusing while reading the struct, so
adjust them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
In the past, I guess the idea was to use state in order to
allow an autofush logic. However, in the current code, it is
used only for debug messages, on a poor man's solution, as
there's already a debug message to indicate when the properties
got flushed.
So, just get rid of it for good.
Reviewed-by: Shuah Khan <shuahkg@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Currently, there are two handlers for ioctls:
- dvb_frontend_ioctl_properties()
- dvb_frontend_ioctl_legacy()
Despite their names, both handles non-legacy DVB ioctls.
Besides that, there's no reason why to not handle all ioctls
on a single handler function.
So, merge them into a single function (dvb_frontend_handle_ioctl)
and reorganize the ioctl's to indicate what's the current DVB
API and what's deprecated.
Despite the big diff, the handling logic for each ioctl is the
same as before.
Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use a switch() on this function, just like on other ioctl
handlers and handle parameters inside each part of the
switch.
That makes it easier to integrate with the already existing
ioctl handler function.
Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Only lg2160 implement gets_property, but there's no need for that,
as no other driver calls this callback, as get_frontend() does the
same, and set_frontend() also calls lg2160 get_frontend().
So, get rid of it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This callback is not actually doing anything but making it to
return an error depending on the DTV frontend command. Well,
that could break userspace for no good reason, and, if needed,
should be implemented, instead, at set_frontend() callback.
So, get rid of it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The stv6110 has a weird code that checks if get_property
and set_property ioctls are defined. If they're, it initializes
a "srate" var from properties cache. Otherwise, it sets to
15MBaud, with won't make any sense.
Thankfully, it seems that someone else discovered the issue in
the past, as "srate" is currently not used anywhere!
So, get rid of that really weird dead code logic.
Reported-by: Honza Petrous <jpetrous@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This driver doesn't implement support for set_property(). Yet,
it implements a boilerplate for it. Get rid of it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As reported by Laurent, when a DVB frontend need to register
two drivers (e. g. a tuner and a demod), if the second driver
fails to register (for example because it was not compiled),
the error handling logic frees the frontend by calling
dvb_frontend_detach(). That used to work fine, but changeset
1f862a68df ("[media] dvb_frontend: move kref to struct dvb_frontend")
added a kref at struct dvb_frontend. So, now, instead of just
freeing the data, the error handling do a kref_put().
That works fine only after dvb_register_frontend() succeeds.
While it would be possible to add a helper function that
would be initializing earlier the kref, that would require
changing every single DVB frontend on non-trivial ways, and
would make frontends different than other drivers.
So, instead of doing that, let's focus on the real issue:
only call kref_put() after kref_init(). That's easy to
check, as, when the dvb frontend is successfuly registered,
it will allocate its own private struct. So, if such
struct is allocated, it means that it is safe to use
kref_put(). If not, then nobody is using yet the frontend,
and it is safe to just deallocate it.
Fixes: 1f862a68df ("[media] dvb_frontend: move kref to struct dvb_frontend")
Reported-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reuse the normal state readout code to get the fixed mode for LVDS/DVO
encoders. This removes some partially duplicated state readout code
from LVDS/DVO encoders. The duplicated code wasn't actually even
populating the negative h/vsync flags, leading to possible state checker
complaints. The normal readout code populates that stuff fully.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009161951.22420-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Without device tree, there is no way to use this driver.
Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The ioctl LIRC_SET_REC_TIMEOUT would set a timeout of 704ns if called
with a timeout of 4294968us.
Cc: <stable@vger.kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add DT binding for the HW IR decoder embedded in SMP86xx/SMP87xx.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The tango HW IR decoder supports NEC, RC-5, RC-6 protocols.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add a keymap for the Sigma Designs Vantage (dev board) remote control.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Without device tree, there is no way to use this driver.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Without device tree, there is no way to use this driver.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
If the kernel is built without device tree, this driver cannot be
used and without gpiolib it cannot control any gpio pin.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When receiving an nec repeat, rc_repeat() is called and then rc_keydown()
with the last decoded scancode. That last call is redundant.
Fixes: 265a2988d2 ("media: rc-core: consistent use of rc_repeat()")
Cc: <stable@vger.kernel.org> # v4.14
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are no users of this functionality (ir-lirc-codec.c has its own
implementation and lirc_zilog.c doesn't use it) so remove it.
This only affects users of the lirc kapi, not rc-core drivers.
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Commit 77469c3f57 prevented setting the page as uptodate when we wrote
the right amount of data, fix that.
Fixes: 77469c3f57 ("9p: saner ->write_end() on failing copy into non-uptodate page")
Reviewed-by: Jan Kara <jack@suse.com>
Signed-off-by: Alexander Levin <alexander.levin@verizon.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Three Kconfig/build warning fixes.
- A fix for lost edge IRQs in the OMAP driver.
-----BEGIN PGP SIGNATURE-----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=3jQF
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here are some smallish GPIO fixes for v4.14. Like with pin control:
some build/Kconfig noise and one serious bug in a specific driver.
- Three Kconfig/build warning fixes
- A fix for lost edge IRQs in the OMAP driver"
* tag 'gpio-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: omap: Fix lost edge interrupts
gpio: omap: omap_gpio_show_rev is not __init
gpio: acpi: work around false-positive -Wstring-overflow warning
gpio: thunderx: select IRQ_DOMAIN_HIERARCHY instead of depends on
- Fix two build problems.
- Fix a regression on the Intel Cherryview interrupt path.
-----BEGIN PGP SIGNATURE-----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=geFS
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Two small things and a slightly larger thing in the Intel Cherryview.
- Fix two build problems
- Fix a regression on the Intel Cherryview interrupt path"
* tag 'pinctrl-v4.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: cherryview: fix issues caused by dynamic gpio irqs mapping
pinctrl/amd: Fix build dependency on pinmux code
pinctrl: bcm2835: fix build warning in bcm2835_gpio_irq_handle_bank
Pull vfs fixes from Al Viro:
"Fairly old DIO bug caught by Andreas (3.10+) and several slightly
younger blk_rq_map_user_iov() bugs, both on map and copy codepaths
(Vitaly and me)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
bio_copy_user_iov(): don't ignore ->iov_offset
more bio_map_user_iov() leak fixes
fix unbalanced page refcounting in bio_map_user_iov
direct-io: Prevent NULL pointer access in submit_page_section
stop_machine is not really a locking primitive we should use, except
when the hw folks tell us the hw is broken and that's the only way to
work around it.
This patch tries to address the locking abuse of stop_machine() from
commit 20e4933c47
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Nov 22 14:41:21 2016 +0000
drm/i915: Stop the machine as we install the wedged submit_request handler
Chris said parts of the reasons for going with stop_machine() was that
it's no overhead for the fast-path. But these callbacks use irqsave
spinlocks and do a bunch of MMIO, and rcu_read_lock is _real_ fast.
To stay as close as possible to the stop_machine semantics we first
update all the submit function pointers to the nop handler, then call
synchronize_rcu() to make sure no new requests can be submitted. This
should give us exactly the huge barrier we want.
I pondered whether we should annotate engine->submit_request as __rcu
and use rcu_assign_pointer and rcu_dereference on it. But the reason
behind those is to make sure the compiler/cpu barriers are there for
when you have an actual data structure you point at, to make sure all
the writes are seen correctly on the read side. But we just have a
function pointer, and .text isn't changed, so no need for these
barriers and hence no need for annotations.
Unfortunately there's a complication with the call to
intel_engine_init_global_seqno:
- Without stop_machine we must hold the corresponding spinlock.
- Without stop_machine we must ensure that all requests are marked as
having failed with dma_fence_set_error() before we call it. That
means we need to split the nop request submission into two phases,
both synchronized with rcu:
1. Only stop submitting the requests to hw and mark them as failed.
2. After all pending requests in the scheduler/ring are suitably
marked up as failed and we can force complete them all, also force
complete by calling intel_engine_init_global_seqno().
This should fix the followwing lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
4.14.0-rc3-CI-CI_DRM_3179+ #1 Tainted: G U
------------------------------------------------------
kworker/3:4/562 is trying to acquire lock:
(cpu_hotplug_lock.rw_sem){++++}, at: [<ffffffff8113d4bc>] stop_machine+0x1c/0x40
but task is already holding lock:
(&dev->struct_mutex){+.+.}, at: [<ffffffffa0136588>] i915_reset_device+0x1e8/0x260 [i915]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #6 (&dev->struct_mutex){+.+.}:
__lock_acquire+0x1420/0x15e0
lock_acquire+0xb0/0x200
__mutex_lock+0x86/0x9b0
mutex_lock_interruptible_nested+0x1b/0x20
i915_mutex_lock_interruptible+0x51/0x130 [i915]
i915_gem_fault+0x209/0x650 [i915]
__do_fault+0x1e/0x80
__handle_mm_fault+0xa08/0xed0
handle_mm_fault+0x156/0x300
__do_page_fault+0x2c5/0x570
do_page_fault+0x28/0x250
page_fault+0x22/0x30
-> #5 (&mm->mmap_sem){++++}:
__lock_acquire+0x1420/0x15e0
lock_acquire+0xb0/0x200
__might_fault+0x68/0x90
_copy_to_user+0x23/0x70
filldir+0xa5/0x120
dcache_readdir+0xf9/0x170
iterate_dir+0x69/0x1a0
SyS_getdents+0xa5/0x140
entry_SYSCALL_64_fastpath+0x1c/0xb1
-> #4 (&sb->s_type->i_mutex_key#5){++++}:
down_write+0x3b/0x70
handle_create+0xcb/0x1e0
devtmpfsd+0x139/0x180
kthread+0x152/0x190
ret_from_fork+0x27/0x40
-> #3 ((complete)&req.done){+.+.}:
__lock_acquire+0x1420/0x15e0
lock_acquire+0xb0/0x200
wait_for_common+0x58/0x210
wait_for_completion+0x1d/0x20
devtmpfs_create_node+0x13d/0x160
device_add+0x5eb/0x620
device_create_groups_vargs+0xe0/0xf0
device_create+0x3a/0x40
msr_device_create+0x2b/0x40
cpuhp_invoke_callback+0xc9/0xbf0
cpuhp_thread_fun+0x17b/0x240
smpboot_thread_fn+0x18a/0x280
kthread+0x152/0x190
ret_from_fork+0x27/0x40
-> #2 (cpuhp_state-up){+.+.}:
__lock_acquire+0x1420/0x15e0
lock_acquire+0xb0/0x200
cpuhp_issue_call+0x133/0x1c0
__cpuhp_setup_state_cpuslocked+0x139/0x2a0
__cpuhp_setup_state+0x46/0x60
page_writeback_init+0x43/0x67
pagecache_init+0x3d/0x42
start_kernel+0x3a8/0x3fc
x86_64_start_reservations+0x2a/0x2c
x86_64_start_kernel+0x6d/0x70
verify_cpu+0x0/0xfb
-> #1 (cpuhp_state_mutex){+.+.}:
__lock_acquire+0x1420/0x15e0
lock_acquire+0xb0/0x200
__mutex_lock+0x86/0x9b0
mutex_lock_nested+0x1b/0x20
__cpuhp_setup_state_cpuslocked+0x53/0x2a0
__cpuhp_setup_state+0x46/0x60
page_alloc_init+0x28/0x30
start_kernel+0x145/0x3fc
x86_64_start_reservations+0x2a/0x2c
x86_64_start_kernel+0x6d/0x70
verify_cpu+0x0/0xfb
-> #0 (cpu_hotplug_lock.rw_sem){++++}:
check_prev_add+0x430/0x840
__lock_acquire+0x1420/0x15e0
lock_acquire+0xb0/0x200
cpus_read_lock+0x3d/0xb0
stop_machine+0x1c/0x40
i915_gem_set_wedged+0x1a/0x20 [i915]
i915_reset+0xb9/0x230 [i915]
i915_reset_device+0x1f6/0x260 [i915]
i915_handle_error+0x2d8/0x430 [i915]
hangcheck_declare_hang+0xd3/0xf0 [i915]
i915_hangcheck_elapsed+0x262/0x2d0 [i915]
process_one_work+0x233/0x660
worker_thread+0x4e/0x3b0
kthread+0x152/0x190
ret_from_fork+0x27/0x40
other info that might help us debug this:
Chain exists of:
cpu_hotplug_lock.rw_sem --> &mm->mmap_sem --> &dev->struct_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&dev->struct_mutex);
lock(&mm->mmap_sem);
lock(&dev->struct_mutex);
lock(cpu_hotplug_lock.rw_sem);
*** DEADLOCK ***
3 locks held by kworker/3:4/562:
#0: ("events_long"){+.+.}, at: [<ffffffff8109c64a>] process_one_work+0x1aa/0x660
#1: ((&(&i915->gpu_error.hangcheck_work)->work)){+.+.}, at: [<ffffffff8109c64a>] process_one_work+0x1aa/0x660
#2: (&dev->struct_mutex){+.+.}, at: [<ffffffffa0136588>] i915_reset_device+0x1e8/0x260 [i915]
stack backtrace:
CPU: 3 PID: 562 Comm: kworker/3:4 Tainted: G U 4.14.0-rc3-CI-CI_DRM_3179+ #1
Hardware name: /NUC7i5BNB, BIOS BNKBL357.86A.0048.2017.0704.1415 07/04/2017
Workqueue: events_long i915_hangcheck_elapsed [i915]
Call Trace:
dump_stack+0x68/0x9f
print_circular_bug+0x235/0x3c0
? lockdep_init_map_crosslock+0x20/0x20
check_prev_add+0x430/0x840
? irq_work_queue+0x86/0xe0
? wake_up_klogd+0x53/0x70
__lock_acquire+0x1420/0x15e0
? __lock_acquire+0x1420/0x15e0
? lockdep_init_map_crosslock+0x20/0x20
lock_acquire+0xb0/0x200
? stop_machine+0x1c/0x40
? i915_gem_object_truncate+0x50/0x50 [i915]
cpus_read_lock+0x3d/0xb0
? stop_machine+0x1c/0x40
stop_machine+0x1c/0x40
i915_gem_set_wedged+0x1a/0x20 [i915]
i915_reset+0xb9/0x230 [i915]
i915_reset_device+0x1f6/0x260 [i915]
? gen8_gt_irq_ack+0x170/0x170 [i915]
? work_on_cpu_safe+0x60/0x60
i915_handle_error+0x2d8/0x430 [i915]
? vsnprintf+0xd1/0x4b0
? scnprintf+0x3a/0x70
hangcheck_declare_hang+0xd3/0xf0 [i915]
? intel_runtime_pm_put+0x56/0xa0 [i915]
i915_hangcheck_elapsed+0x262/0x2d0 [i915]
process_one_work+0x233/0x660
worker_thread+0x4e/0x3b0
kthread+0x152/0x190
? process_one_work+0x660/0x660
? kthread_create_on_node+0x40/0x40
ret_from_fork+0x27/0x40
Setting dangerous option reset - tainting kernel
i915 0000:00:02.0: Resetting chip after gpu hang
Setting dangerous option reset - tainting kernel
i915 0000:00:02.0: Resetting chip after gpu hang
v2: Have 1 global synchronize_rcu() barrier across all engines, and
improve commit message.
v3: We need to protect the seqno update with the timeline spinlock (in
set_wedged) to avoid racing with other updates of the seqno, like we
already do in nop_submit_request (Chris).
v4: Use two-phase sequence to plug the race Chris spotted where we can
complete requests before they're marked up with -EIO.
v5: Review from Chris:
- simplify nop_submit_request.
- Add comment to rcu_read_lock section.
- Align comments with the new style.
v6: Remove unused variable to appease CI.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102886
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103096
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171011091019.1425-1-daniel.vetter@ffwll.ch
The devicetree prefix mcp is deprecated in favour of microchip. Thus
this replaces mcp with microchip for the mcp23017 gpio expander chip.
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Move the pcie_rc node to common file so that it can be
used by dra76-evm as well.
Signed-off-by: Ravikumar Kattekola <rk@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
As per recent TRM, PBIAS cell on omap5 devices supports
3.3v and not 3.0v as documented earlier.
Update PBIAS regulator max voltage to match this.
Document reference:
SWPU249AF - OMAP543x Technical reference manual August 2016
Signed-off-by: Ravikumar Kattekola <rk@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
As per recent TRM, PBIAS cell on dra7 devices supports
3.3v and not 3.0v as documented earlier.
Update PBIAS regulator max voltage to match this.
Document reference:
SPRUI30C – DRA75x, DRA74x Technical reference manual- November 2016
Tested on:
DRA75x PG 2.0 REV H EVM
Signed-off-by: Ravikumar Kattekola <rk@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Falling back to the lowest value is likely the only thing we can do, but
doing it silently seems like a bad thing to do. Catch it early and make
loud noises.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009092959.29021-1-jani.nikula@intel.com
Some routines in mem_encrypt.c are called very early in the boot process,
e.g. sme_enable(). When CONFIG_KCOV=y is defined the resulting code added
to sme_enable() (and others) for KCOV instrumentation results in a kernel
crash. Disable the KCOV instrumentation for mem_encrypt.c by adding
KCOV_INSTRUMENT_mem_encrypt.o := n to arch/x86/mm/Makefile.
In order to avoid other possible early boot issues, model mem_encrypt.c
after head64.c in regards to tools. In addition to disabling KCOV as
stated above and a previous patch that disables branch profiling, also
remove the "-pg" CFLAG if CONFIG_FUNCTION_TRACER is enabled and set
KASAN_SANITIZE to "n", each of which are done on a file basis.
Reported-by: kernel test robot <lkp@01.org>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171010194504.18887.38053.stgit@tlendack-t1.amdoffice.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
caiaq driver doesn't kill the URB properly at its error path during
the probe, which may lead to a use-after-free error later. This patch
addresses it.
Reported-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pulling the EP validity checks in USB audio drivers.
It also adds a new helper in USB core, which was acked by Greg.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are a few other places calling usb_submit_urb() with the URB
composed from the fixed endpoint without validation. For avoiding the
spurious kernel warnings, add the sanity checks to appropriate
places.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few other places in caiaq driver have the URB handling with the
fixed endpoints without checking the validity, too. Add the sanity
check with the new helper function at each appropriate place for
avoiding the spurious kernel warnings due to invalid EPs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
hiface usb-audio driver sets up URBs containing the fixed endpoints
without validation. This may end up with an oops-like kernel warning
when submitted.
For avoiding it, this patch adds the calls of the new sanity-check
helper for URBs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
usx2y driver sets up URBs containing the fixed endpoints without
validation. This may end up with an oops-like kernel warning when
submitted.
For avoiding it, this patch adds the calls of the new sanity-check
helper for URBs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The <generated/utsrelease.h> defines UTS_RELEASE, but I do not
see any reference to it in arch/x86/boot/header.S.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1505921232-8960-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We don't document our ELF hwcaps, leaving developers to interpret them
according to hearsay, guesswork, or (in exceptional cases) inspection of
the current kernel code.
This is less than optimal, and it would be far better if we had some
definitive description of each of the ELF hwcaps that developers could
refer to.
This patch adds a document describing the (native) arm64 ELF hwcaps.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[ Updated new hwcap entries in the document ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
ARMv8-A adds a few optional features for ARMv8.2 and ARMv8.3.
Expose them to the userspace via HWCAPs and mrs emulation.
SHA2-512 - Instruction support for SHA512 Hash algorithm (e.g SHA512H,
SHA512H2, SHA512U0, SHA512SU1)
SHA3 - SHA3 crypto instructions (EOR3, RAX1, XAR, BCAX).
SM3 - Instruction support for Chinese cryptography algorithm SM3
SM4 - Instruction support for Chinese cryptography algorithm SM4
DP - Dot Product instructions (UDOT, SDOT).
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This patch adds support for Cavium's fifth generation SATA controller.
It is an on-chip controller and complies with AHCI 1.3.1. As the
controller uses 64-bit addresses it cannot use the standard AHCI BAR5
and so uses BAR4.
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When figuring out the size of the DIMMs and the cluster mode is SNC2 or SNC4 the
current algorithm ignores the contribution of some of the channels resulting in
EDAC never knowing of the existence of some DIMMs attached to such channels (thus
sysfs is not populated).
Instead of selectively iterating from 0 to interlv_ways when looking for all the
participants in the interleave, do an exhaustive search and iterate from 0 to
KNL_MAX_CHANNELS. The algorithm is already smart enough to consider participants
only one time.
This works fine in all KNL cluster modes and even when there are missing DIMMs
as the contribution of those channels is 0.
Signed-off-by: Luis Felipe Sandoval Castro <luis.felipe.sandoval.castro@intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: arozansk@redhat.com
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: qiuxu.zhuo@intel.com
Link: http://lkml.kernel.org/r/1506606882-90521-1-git-send-email-luis.felipe.sandoval.castro@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Evidently this API is intended to be used to isolate against
API changes, so use it instead of accessing ->authsize.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In addition to DEFT, Elecom introduced a larger trackball called HUGE, in
both wired (M-HT1URBK) and wireless (M-HT1DRBK) versions. It has the same
buttons and behavior as the DEFT. This patch adds the two relevant USB IDs
to enable operation of the three Fn buttons on the top of the device.
Cc: Diego Elio Petteno <flameeyes@flameeyes.eu>
Signed-off-by: Alex Manoussakis <amanou@gnu.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>