Commit graph

932,869 commits

Author SHA1 Message Date
Suravee Suthikulpanit
051f3ca02e sched/topology: Introduce NUMA identity node sched domain
On AMD Family17h-based (EPYC) system, a logical NUMA node can contain
upto 8 cores (16 threads) with the following topology.

             ----------------------------
         C0  | T0 T1 |    ||    | T0 T1 | C4
             --------|    ||    |--------
         C1  | T0 T1 | L3 || L3 | T0 T1 | C5
             --------|    ||    |--------
         C2  | T0 T1 | #0 || #1 | T0 T1 | C6
             --------|    ||    |--------
         C3  | T0 T1 |    ||    | T0 T1 | C7
             ----------------------------

Here, there are 2 last-level (L3) caches per logical NUMA node.
A socket can contain upto 4 NUMA nodes, and a system can support
upto 2 sockets. With full system configuration, current scheduler
creates 4 sched domains:

  domain0 SMT       (span a core)
  domain1 MC        (span a last-level-cache)
  domain2 NUMA      (span a socket: 4 nodes)
  domain3 NUMA      (span a system: 8 nodes)

Note that there is no domain to represent cpus spaning a logical
NUMA node.  With this hierarchy of sched domains, the scheduler does
not balance properly in the following cases:

Case1:

 When running 8 tasks, a properly balanced system should
 schedule a task per logical NUMA node. This is not the case for
 the current scheduler.

Case2:

 In some cases, threads are scheduled on the same cpu, while other
 cpus are idle. This results in run-to-run inconsistency. For example:

  taskset -c 0-7 sysbench --num-threads=8 --test=cpu \
                          --cpu-max-prime=100000 run

Total execution time ranges from 25.1s to 33.5s depending on threads
placement, where 25.1s is when all 8 threads are balanced properly
on 8 cpus.

Introducing NUMA identity node sched domain, which is based on how
SRAT/SLIT table define a logical NUMA node. This results in the following
hierarchy of sched domains on the same system described above.

  domain0 SMT       (span a core)
  domain1 MC        (span a last-level-cache)
  domain2 NODE      (span a logical NUMA node)
  domain3 NUMA      (span a socket: 4 nodes)
  domain4 NUMA      (span a system: 8 nodes)

This fixes the improper load balancing cases mentioned above.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@suse.de
Link: http://lkml.kernel.org/r/1504768805-46716-1-git-send-email-suravee.suthikulpanit@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10 11:45:28 +02:00
Peter Zijlstra
ed4ad1ca08 sched/topology: Restore SD_PREFER_SIBLING on MC domains
The normal x86_topology on NHM+ machines degenerates because the MC
and CPU domains are of the same size, therefore MC inherits
SD_PREFER_SIBLING from CPU (which then gets taken out). The result is
that we'll spread tasks across the first NUMA level in order to
maximize cache utilization.

However, for the x86_numa_in_package_topology we loose the CPU domain,
and we'll not have SD_PREFER_SIBLING set anywhere, giving a distinct
difference in behaviour.

Commit:

  8e7fbcbc22 ("sched: Remove stale power aware scheduling remnants and dysfunctional knobs")

made a fail by not preserving the SD_PREFER_SIBLING for the !power_saving
case on both CPU and MC.

Then commit:

  6956dc568f ("sched/numa: Add SD_PERFER_SIBLING to CPU domain")

adds it back to the CPU but not MC.

Restore that now, such that we get consistent spreading behaviour wrt
L3 and NUMA.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10 11:45:27 +02:00
luca abeni
799ba82de0 sched/deadline: Use C bitfields for the state flags
Ask the compiler to use a single bit for storing true / false values,
instead of wasting the size of a whole int value.
Tested with gcc 5.4.0 on x86_64, and the compiler produces the expected
Assembly (similar to the Assembly code generated when explicitly accessing
the bits with bitmasks, "&" and "|").

Signed-off-by: luca abeni <luca.abeni@santannapisa.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504778971-13573-5-git-send-email-luca.abeni@santannapisa.it
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10 11:45:26 +02:00
Peter Zijlstra
8c0944cee7 sched/deadline: Rename __dl_clear() to __dl_sub()
__dl_sub() is more meaningful as a name, and is more consistent
with the naming of the dual function (__dl_add()).

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Luca Abeni <luca.abeni@santannapisa.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504778971-13573-4-git-send-email-luca.abeni@santannapisa.it
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10 11:45:26 +02:00
Lucas Stach
6eb3ecc33a drm/etnaviv: rework clock initialization
The reset path wants to initialize the clock control register regardless
of the DYNAMIC_FREQUENCY_SCALING feature, so don't call clock update, but
explicitly load the register.

Also disabling of the debug registers is moved into the reset function,
so we always get to the same state after a GPU reset. This means the
clock update function should not touch the bits already set in the clock
control register, but instead only update the scaling bits.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-10-10 11:45:06 +02:00
Luca Abeni
295d6d5e37 sched/deadline: Fix switching to -deadline
Fix a bug introduced in:

  72f9f3fdc9 ("sched/deadline: Remove dl_new from struct sched_dl_entity")

After that commit, when switching to -deadline if the scheduling
deadline of a task is in the past then switched_to_dl() calls
setup_new_entity() to properly initialize the scheduling deadline
and runtime.

The problem is that the task is enqueued _before_ having its parameters
initialized by setup_new_entity(), and this can cause problems.
For example, a task with its out-of-date deadline in the past will
potentially be enqueued as the highest priority one; however, its
adjusted deadline may not be the earliest one.

This patch fixes the problem by initializing the task's parameters before
enqueuing it.

Signed-off-by: luca abeni <luca.abeni@santannapisa.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504778971-13573-3-git-send-email-luca.abeni@santannapisa.it
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10 11:43:30 +02:00
luca abeni
e964d3501b sched/headers: Remove duplicate prototype of __dl_clear_params()
Signed-off-by: luca abeni <luca.abeni@santannapisa.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504778971-13573-2-git-send-email-luca.abeni@santannapisa.it
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10 11:43:30 +02:00
Peter Zijlstra
1d48b080bc sched/debug: Rename task-state printing helpers
Steve requested better names for the new task-state helper functions.

So introduce the concept of task-state index for the printing and
rename __get_task_state() to task_state_index() and
__task_state_to_char() to task_index_to_char().

Requested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170929115016.pzlqc7ss3ccystyg@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10 11:43:29 +02:00
Peter Zijlstra
62cb1188ed sched/idle: Move quiet_vmstate() into the NOHZ code
quiet_vmstat() is an expensive function that only makes sense when we
go into NOHZ.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: aubrey.li@linux.intel.com
Cc: cl@linux.com
Cc: fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10 11:43:29 +02:00
Lucas Stach
b670908384 drm/etnaviv: remove IOMMU dependency
Using the IOMMU API to manage the internal GPU MMU has been an
historical accident and it keeps getting in the way, as well as
entangling the driver with the inner workings of the IOMMU
subsystem.

Clean this up by removing the usage of iommu_domain, which is the
last piece linking etnaviv to the IOMMU subsystem.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2017-10-10 11:36:37 +02:00
Lucas Stach
27d38062a2 drm/etnaviv: mmu: mark local functions static
And clean up the header file a bit.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
2017-10-10 11:36:36 +02:00
Lucas Stach
50073cf98d drm/etnaviv: mmu: stop using iommu map/unmap functions
This is a preparation to remove the etnaviv dependency on the IOMMU
subsystem by importing the relevant parts of the iommu map/unamp
functions into the driver.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
2017-10-10 11:36:30 +02:00
Lucas Stach
86666c54c8 drm/etnaviv: iommuv1: remove map_lock
It wasn't protecting anything, as the single word writes used to
set up or tear down a translation are already inherently atomic,
so the spinlock is pure overhead.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
2017-10-10 11:35:31 +02:00
Lucas Stach
bd2442bc1b drm/etnaviv: iommuv1: fold pgtable_write into callers
A function doing a single assignment is not really helping the
code flow.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
2017-10-10 11:35:30 +02:00
Lucas Stach
1a540490e9 drm/etnaviv: iommuv1: fold pagetable alloc and free into caller
Those functions are simple enough to fold them into the calling
function. This also fixes a correctness issue, as the alloc/free
functions didn't specifiy the device the memory was allocated for.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
2017-10-10 11:35:29 +02:00
Lucas Stach
87ceb37560 drm/etnaviv: remove iova_to_phys iommu ops
They are not used in any way, so can go away.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
2017-10-10 11:34:57 +02:00
Lucas Stach
3bc3e0ecef drm/etnaviv: remove iommu fault handler
The handler has never been used, so it's really just dead code.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
2017-10-10 11:34:57 +02:00
benjamin.gaignard@linaro.org
d5532f65e0 drm/bridge/synopsys: dsi :remove is_panel_bridge
When using drm_of_panel_bridge_remove() we can simplify the
code and remove is_panel_bridge from dw_mipi_dsi structure.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506936888-23844-6-git-send-email-benjamin.gaignard@linaro.org
2017-10-10 11:33:00 +02:00
benjamin.gaignard@linaro.org
8f6b06c11c drm/vc4: remove bridge from driver internal structure
With a call to drm_of_panel_bridge_remove() we could remove
the bridge without store it in vc4_dpi internal driver structure.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506936888-23844-5-git-send-email-benjamin.gaignard@linaro.org
2017-10-10 11:32:54 +02:00
benjamin.gaignard@linaro.org
08de7afa3a drm/stm: ltdc: remove bridge from driver internal structure
With a call to drm_of_panel_bridge_remove() we could remove the bridge
without store it in ldtc internal driver structure.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506936888-23844-4-git-send-email-benjamin.gaignard@linaro.org
2017-10-10 11:32:48 +02:00
benjamin.gaignard@linaro.org
c70087e8f1 drm/drm_of: add drm_of_panel_bridge_remove function
This function is the pendant of drm_of_find_panel_or_bridge()
to remove a previously allocated panel_bridge.
Given a specific port and endpoint it remove the panel bridge.
Since drm_panel_bridge_remove() will check that bridge parameter
is not NULL and is a real drm_panel_bridge and no a simple bridge
it is safe to call it directly.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506936888-23844-3-git-send-email-benjamin.gaignard@linaro.org
2017-10-10 11:32:43 +02:00
benjamin.gaignard@linaro.org
6b0e284cfa drm/bridge: make drm_panel_bridge_remove more robust
Make sure that bridge parameter is not NULL and can be safely
cast into a panel_bridge structure.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506936755-23625-2-git-send-email-benjamin.gaignard@linaro.org
2017-10-10 11:32:35 +02:00
Ingo Molnar
151aeab777 Merge branch 'sched/urgent' into sched/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10 11:30:59 +02:00
Arnd Bergmann
c42c5ac426 ASoC: dapm: mark 'snd_soc_dapm_free_kcontrol' as static
The newly introduced function is declared as globally visible,
but is not declared in a header, causing a warning 'make W=1'
or 'make C=1':

sound/soc/soc-dapm.c:3782:1: warning: symbol 'snd_soc_dapm_free_kcontrol' was not declared. Should it be static?

The suggestion to make it static seems appropriate here, so let's
do that.

Fixes: 19ad683abc ("ASoC: dapm: Avoid creating kcontrol for params")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-10 10:30:37 +01:00
Arnd Bergmann
667ebc97c9 ASoC: dapm: add initialization for w_param_text pointer
We now allocate the array conditionally, but we always pass
the pointer to the new snd_soc_dapm_free_kcontrol() function,
which introduces a warning for the case that it is not
initialized:

sound/soc/soc-dapm.c: In function 'snd_soc_dapm_new_pcm':
sound/soc/soc-dapm.c:3940:2: error: 'w_param_text' may be used uninitialized in this function [-Werror=maybe-uninitialized]

As snd_soc_dapm_free_kcontrol() is global, it doesn't get inlined
and gcc fails to notice that we don't actually access the array
in that case, so the code is actually safe. Adding an initialization
for the array pointer shuts up the warning.

Fixes: 19ad683abc ("ASoC: dapm: Avoid creating kcontrol for params")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-10 10:26:23 +01:00
Kuninori Morimoto
08e61d03b0 ASoC: soc-core: remove unnecessary message from snd_soc_register_component()
No need to print an error message if kzalloc fails.
The core will print it.

Reported-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-10 10:23:11 +01:00
Mark Brown
d7346278cc Merge branch 'topic/component' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-core 2017-10-10 10:23:08 +01:00
Kuninori Morimoto
e0dac41b8c ASoC: soc-core: add snd_soc_add_component()
ALSA SoC platform/codec will be replaced to component soon.
But, some function exist in "platform" doesn't exist in "component".
Current soc-core has snd_soc_register_component(), but
doesn't have snd_soc_add_component() like snd_soc_add_platform().
This patch adds it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-10 10:18:58 +01:00
Vaibhav Jain
8f6a90421c cxl: Rename register PSL9_FIR2 to PSL9_FIR_MASK
PSL9 doesn't have a FIR2 register as was the case with PSL8. However
currently the register definitions in 'cxl.h' have a definition for
PSL9_FIR2 that actually points to PSL9_FIR_MASK register in the P1
area at offset 0x308.

So this patch renames the def PSL9_FIR2 to PSL9_FIR_MASK and updates
the references in the code to point to the new identifier. It also
removes the code to dump contents of FIR2 (FIR_MASK actually) in
cxl_native_irq_dump_regs_psl9().

Fixes: f24be42aab ("cxl: Add psl9 specific code")
Reported-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-10 20:17:49 +11:00
Maxime Chevallier
dd7aa8d4b5 spi: a3700: Change SPI mode before asserting chip-select
The spi device mode should be configured in the controller before the
chip-select is asserted, so that a clock polarity configuration change
is not interpreted as a clock tick by the device.

This patch moves the mode setting to the 'prepare_message' function
instead of the 'transfer_one' function.

By doing so, this patch also removes redundant code in
a3700_spi_clock_set.

This was tested on EspressoBin board, with spidev.

Signed-off-by: Maxime Chevallier <maxime.chevallier@smile.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-10 10:17:06 +01:00
Sandipan Das
b0490a04e7 powerpc/lib/sstep: Fix count leading zeros instructions
According to the GCC documentation, the behaviour of __builtin_clz()
and __builtin_clzl() is undefined if the value of the input argument
is zero. Without handling this special case, these builtins have been
used for emulating the following instructions:
  * Count Leading Zeros Word (cntlzw[.])
  * Count Leading Zeros Doubleword (cntlzd[.])

This fixes the emulated behaviour of these instructions by adding an
additional check for this special case.

Fixes: 3cdfcbfd32 ("powerpc: Change analyse_instr so it doesn't modify *regs")
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-10 20:16:32 +11:00
Maxime Chevallier
5a866ec001 spi: a3700: Return correct value on timeout detection
When waiting for transfer completion, a3700_spi_wait_completion
returns a boolean indicating if a timeout occurred.

The function was returning 'true' everytime, failing to detect any
timeout.

This patch makes it return 'false' when a timeout is reached.

Signed-off-by: Maxime Chevallier <maxime.chevallier@smile.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2017-10-10 10:14:32 +01:00
Heiko Stuebner
0133c4928c ARM: dts: rockchip: fix mali400 ppmmu interrupt names
The interrupts were wrongly named as ppXmmu while the binding
specifies them as ppmmuX.
Fix that for the recently added Utgard mali nodes on Rockchip socs.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-10-10 11:04:33 +02:00
Karthik Ananthapadmanabha
073a435d55 mwifiex: Random MAC address during scanning
Driver will advertise RANDOM_MAC support only if the device
supports this feature.

Signed-off-by: Karthik Ananthapadmanabha <karthida@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-10 11:21:06 +03:00
Dan Carpenter
64e79426c2 rtlwifi: silence underflow warning
My static checker complains that we have an upper bound but no lower
bound.  I suspect neither are really required but it doesn't hurt to add
a check for negatives.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-10 11:19:26 +03:00
Ian W MORRISON
18a39b9ab2 Bluetooth: btbcm: Add support for MINIX Z83-4 based devices
The MINIX NEO Z83-4 and MINIX NEO Z83-4 Pro devices use an AP6255 chip
for wifi and bluetooth. Bluetooth requires an ACPI device id of BCM2EA4
with BCM4345 rev C0 firmware.

This patch defines the firmware subversion.

Signed-off-by: Ian W MORRISON <ianwmorrison@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-10-10 10:14:12 +02:00
Peter Zijlstra
024c9d2fae sched/core: Ensure load_balance() respects the active_mask
While load_balance() masks the source CPUs against active_mask, it had
a hole against the destination CPU. Ensure the destination CPU is also
part of the 'domain-mask & active-mask' set.

Reported-by: Levin, Alexander (Sasha Levin) <alexander.levin@verizon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 77d1dfda0e ("sched/topology, cpuset: Avoid spurious/wrong domain rebuilds")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10 10:14:03 +02:00
Peter Zijlstra
f2cdd9cc6c sched/core: Address more wake_affine() regressions
The trivial wake_affine_idle() implementation is very good for a
number of workloads, but it comes apart at the moment there are no
idle CPUs left, IOW. the overloaded case.

hackbench:

		NO_WA_WEIGHT		WA_WEIGHT

hackbench-20  : 7.362717561 seconds	6.450509391 seconds

(win)

netperf:

		  NO_WA_WEIGHT		WA_WEIGHT

TCP_SENDFILE-1	: Avg: 54524.6		Avg: 52224.3
TCP_SENDFILE-10	: Avg: 48185.2          Avg: 46504.3
TCP_SENDFILE-20	: Avg: 29031.2          Avg: 28610.3
TCP_SENDFILE-40	: Avg: 9819.72          Avg: 9253.12
TCP_SENDFILE-80	: Avg: 5355.3           Avg: 4687.4

TCP_STREAM-1	: Avg: 41448.3          Avg: 42254
TCP_STREAM-10	: Avg: 24123.2          Avg: 25847.9
TCP_STREAM-20	: Avg: 15834.5          Avg: 18374.4
TCP_STREAM-40	: Avg: 5583.91          Avg: 5599.57
TCP_STREAM-80	: Avg: 2329.66          Avg: 2726.41

TCP_RR-1	: Avg: 80473.5          Avg: 82638.8
TCP_RR-10	: Avg: 72660.5          Avg: 73265.1
TCP_RR-20	: Avg: 52607.1          Avg: 52634.5
TCP_RR-40	: Avg: 57199.2          Avg: 56302.3
TCP_RR-80	: Avg: 25330.3          Avg: 26867.9

UDP_RR-1	: Avg: 108266           Avg: 107844
UDP_RR-10	: Avg: 95480            Avg: 95245.2
UDP_RR-20	: Avg: 68770.8          Avg: 68673.7
UDP_RR-40	: Avg: 76231            Avg: 75419.1
UDP_RR-80	: Avg: 34578.3          Avg: 35639.1

UDP_STREAM-1	: Avg: 64684.3          Avg: 66606
UDP_STREAM-10	: Avg: 52701.2          Avg: 52959.5
UDP_STREAM-20	: Avg: 30376.4          Avg: 29704
UDP_STREAM-40	: Avg: 15685.8          Avg: 15266.5
UDP_STREAM-80	: Avg: 8415.13          Avg: 7388.97

(wins and losses)

sysbench:

		    NO_WA_WEIGHT		WA_WEIGHT

sysbench-mysql-2  :  2135.17 per sec.		 2142.51 per sec.
sysbench-mysql-5  :  4809.68 per sec.            4800.19 per sec.
sysbench-mysql-10 :  9158.59 per sec.            9157.05 per sec.
sysbench-mysql-20 : 14570.70 per sec.           14543.55 per sec.
sysbench-mysql-40 : 22130.56 per sec.           22184.82 per sec.
sysbench-mysql-80 : 20995.56 per sec.           21904.18 per sec.

sysbench-psql-2   :  1679.58 per sec.            1705.06 per sec.
sysbench-psql-5   :  3797.69 per sec.            3879.93 per sec.
sysbench-psql-10  :  7253.22 per sec.            7258.06 per sec.
sysbench-psql-20  : 11166.75 per sec.           11220.00 per sec.
sysbench-psql-40  : 17277.28 per sec.           17359.78 per sec.
sysbench-psql-80  : 17112.44 per sec.           17221.16 per sec.

(increase on the top end)

tbench:

NO_WA_WEIGHT

Throughput 685.211 MB/sec   2 clients   2 procs  max_latency=0.123 ms
Throughput 1596.64 MB/sec   5 clients   5 procs  max_latency=0.119 ms
Throughput 2985.47 MB/sec  10 clients  10 procs  max_latency=0.262 ms
Throughput 4521.15 MB/sec  20 clients  20 procs  max_latency=0.506 ms
Throughput 9438.1  MB/sec  40 clients  40 procs  max_latency=2.052 ms
Throughput 8210.5  MB/sec  80 clients  80 procs  max_latency=8.310 ms

WA_WEIGHT

Throughput 697.292 MB/sec   2 clients   2 procs  max_latency=0.127 ms
Throughput 1596.48 MB/sec   5 clients   5 procs  max_latency=0.080 ms
Throughput 2975.22 MB/sec  10 clients  10 procs  max_latency=0.254 ms
Throughput 4575.14 MB/sec  20 clients  20 procs  max_latency=0.502 ms
Throughput 9468.65 MB/sec  40 clients  40 procs  max_latency=2.069 ms
Throughput 8631.73 MB/sec  80 clients  80 procs  max_latency=8.605 ms

(increase on the top end)

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10 10:14:03 +02:00
Peter Zijlstra
d153b15344 sched/core: Fix wake_affine() performance regression
Eric reported a sysbench regression against commit:

  3fed382b46 ("sched/numa: Implement NUMA node level wake_affine()")

Similarly, Rik was looking at the NAS-lu.C benchmark, which regressed
against his v3.10 enterprise kernel.

PRE (current tip/master):

 ivb-ep sysbench:

   2: [30 secs]     transactions:                        64110  (2136.94 per sec.)
   5: [30 secs]     transactions:                        143644 (4787.99 per sec.)
  10: [30 secs]     transactions:                        274298 (9142.93 per sec.)
  20: [30 secs]     transactions:                        418683 (13955.45 per sec.)
  40: [30 secs]     transactions:                        320731 (10690.15 per sec.)
  80: [30 secs]     transactions:                        355096 (11834.28 per sec.)

 hsw-ex NAS:

 OMP_PROC_BIND/lu.C.x_threads_144_run_1.log: Time in seconds =                    18.01
 OMP_PROC_BIND/lu.C.x_threads_144_run_2.log: Time in seconds =                    17.89
 OMP_PROC_BIND/lu.C.x_threads_144_run_3.log: Time in seconds =                    17.93
 lu.C.x_threads_144_run_1.log: Time in seconds =                   434.68
 lu.C.x_threads_144_run_2.log: Time in seconds =                   405.36
 lu.C.x_threads_144_run_3.log: Time in seconds =                   433.83

POST (+patch):

 ivb-ep sysbench:

   2: [30 secs]     transactions:                        64494  (2149.75 per sec.)
   5: [30 secs]     transactions:                        145114 (4836.99 per sec.)
  10: [30 secs]     transactions:                        278311 (9276.69 per sec.)
  20: [30 secs]     transactions:                        437169 (14571.60 per sec.)
  40: [30 secs]     transactions:                        669837 (22326.73 per sec.)
  80: [30 secs]     transactions:                        631739 (21055.88 per sec.)

 hsw-ex NAS:

 lu.C.x_threads_144_run_1.log: Time in seconds =                    23.36
 lu.C.x_threads_144_run_2.log: Time in seconds =                    22.96
 lu.C.x_threads_144_run_3.log: Time in seconds =                    22.52

This patch takes out all the shiny wake_affine() stuff and goes back to
utter basics. Between the two CPUs involved with the wakeup (the CPU
doing the wakeup and the CPU we ran on previously) pick the CPU we can
run on _now_.

This restores much of the regressions against the older kernels,
but leaves some ground in the overloaded case. The default-enabled
WA_WEIGHT (which will be introduced in the next patch) is an attempt
to address the overloaded situation.

Reported-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jinpuwang@gmail.com
Cc: vcaputo@pengaru.com
Fixes: 3fed382b46 ("sched/numa: Implement NUMA node level wake_affine()")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10 10:14:02 +02:00
Ian W MORRISON
1bdb68b2e8 Bluetooth: hci_bcm: Add support for MINIX Z83-4 based devices
The MINIX NEO Z83-4 and MINIX NEO Z83-4 Pro devices use an AP6255 chip for
wifi and bluetooth. Bluetooth requires an ACPI device id of BCM2EA4 with
BCM4345 rev C0 firmware.

This patch adds the device id and to use trigger type IRQF_TRIGGER_FALLING
as defined by 'GpioInt' in the ACPI DSDT table:

    Device (BLT0)
    {
        Name (_HID, "BCM2EA4")  // _HID: Hardware ID
        Method (_STA, 0, NotSerialized)  // _STA: Status
        {
            Return (0x0F)
        }

        Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
        {
            Name (UBUF, ResourceTemplate ()
            {
                UartSerialBusV2 (0x0001C200, DataBitsEight, StopBitsOne,
                    0xFC, LittleEndian, ParityTypeNone, FlowControlHardware,
                    0x0020, 0x0020, "\\_SB.PCI0.URT1",
                    0x00, ResourceConsumer, , Exclusive,
                    )
                GpioInt (Level, ActiveLow, Exclusive, PullNone, 0x0000,
                    "\\_SB.GPO1", 0x00, ResourceConsumer, ,
                    )
                    {   // Pin list
                        0x0005
                    }
                GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
                    "\\_SB.GPO1", 0x00, ResourceConsumer, ,
                    )
                    {   // Pin list
                        0x0007
                    }
                GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
                    "\\_SB.GPO1", 0x00, ResourceConsumer, ,
                    )
                    {   // Pin list
                        0x0004
                    }
            })
            Return (UBUF) /* \_SB_.PCI0.URT1.BLT0._CRS.UBUF */
        }
    }

Signed-off-by: Ian W MORRISON <ianwmorrison@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-10-10 10:13:12 +02:00
Andrey Konovalov
fc09785de0 p54: don't unregister leds when they are not initialized
ieee80211_register_hw() in p54_register_common() may fail and leds won't
get initialized. Currently p54_unregister_common() doesn't check that and
always calls p54_unregister_leds(). The fix is to check priv->registered
flag before calling p54_unregister_leds().

Found by syzkaller.

INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 1 PID: 1404 Comm: kworker/1:1 Not tainted
4.14.0-rc1-42251-gebb2c2437d80-dirty #205
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
 __dump_stack lib/dump_stack.c:16
 dump_stack+0x292/0x395 lib/dump_stack.c:52
 register_lock_class+0x6c4/0x1a00 kernel/locking/lockdep.c:769
 __lock_acquire+0x27e/0x4550 kernel/locking/lockdep.c:3385
 lock_acquire+0x259/0x620 kernel/locking/lockdep.c:4002
 flush_work+0xf0/0x8c0 kernel/workqueue.c:2886
 __cancel_work_timer+0x51d/0x870 kernel/workqueue.c:2961
 cancel_delayed_work_sync+0x1f/0x30 kernel/workqueue.c:3081
 p54_unregister_leds+0x6c/0xc0 drivers/net/wireless/intersil/p54/led.c:160
 p54_unregister_common+0x3d/0xb0 drivers/net/wireless/intersil/p54/main.c:856
 p54u_disconnect+0x86/0x120 drivers/net/wireless/intersil/p54/p54usb.c:1073
 usb_unbind_interface+0x21c/0xa90 drivers/usb/core/driver.c:423
 __device_release_driver drivers/base/dd.c:861
 device_release_driver_internal+0x4f4/0x5c0 drivers/base/dd.c:893
 device_release_driver+0x1e/0x30 drivers/base/dd.c:918
 bus_remove_device+0x2f4/0x4b0 drivers/base/bus.c:565
 device_del+0x5c4/0xab0 drivers/base/core.c:1985
 usb_disable_device+0x1e9/0x680 drivers/usb/core/message.c:1170
 usb_disconnect+0x260/0x7a0 drivers/usb/core/hub.c:2124
 hub_port_connect drivers/usb/core/hub.c:4754
 hub_port_connect_change drivers/usb/core/hub.c:5009
 port_event drivers/usb/core/hub.c:5115
 hub_event+0x1318/0x3740 drivers/usb/core/hub.c:5195
 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119
 process_scheduled_works kernel/workqueue.c:2179
 worker_thread+0xb2b/0x1850 kernel/workqueue.c:2255
 kthread+0x3a1/0x470 kernel/kthread.c:231
 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431

Cc: stable@vger.kernel.org
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-10 11:08:27 +03:00
leilei.lin
e6a5203399 perf/core: Fix cgroup time when scheduling descendants
Update cgroup time when an event is scheduled in by descendants.

Reviewed-and-tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: leilei.lin <leilei.lin@alibaba-inc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: brendan.d.gregg@gmail.com
Cc: yang_oliver@hotmail.com
Link: http://lkml.kernel.org/r/CALPjY3mkHiekRkRECzMi9G-bjUQOvOjVBAqxmWkTzc-g+0LwMg@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10 10:06:55 +02:00
Will Deacon
df0062b27e perf/core: Avoid freeing static PMU contexts when PMU is unregistered
Since commit:

  1fd7e41699 ("perf/core: Remove perf_cpu_context::unique_pmu")

... when a PMU is unregistered then its associated ->pmu_cpu_context is
unconditionally freed. Whilst this is fine for dynamically allocated
context types (i.e. those registered using perf_invalid_context), this
causes a problem for sharing of static contexts such as
perf_{sw,hw}_context, which are used by multiple built-in PMUs and
effectively have a global lifetime.

Whilst testing the ARM SPE driver, which must use perf_sw_context to
support per-task AUX tracing, unregistering the driver as a result of a
module unload resulted in:

 Unable to handle kernel NULL pointer dereference at virtual address 00000038
 Internal error: Oops: 96000004 [#1] PREEMPT SMP
 Modules linked in: [last unloaded: arm_spe_pmu]
 PC is at ctx_resched+0x38/0xe8
 LR is at perf_event_exec+0x20c/0x278
 [...]
 ctx_resched+0x38/0xe8
 perf_event_exec+0x20c/0x278
 setup_new_exec+0x88/0x118
 load_elf_binary+0x26c/0x109c
 search_binary_handler+0x90/0x298
 do_execveat_common.isra.14+0x540/0x618
 SyS_execve+0x38/0x48

since the software context has been freed and the ctx.pmu->pmu_disable_count
field has been set to NULL.

This patch fixes the problem by avoiding the freeing of static PMU contexts
altogether. Whilst the sharing of dynamic contexts is questionable, this
actually requires the caller to share their context pointer explicitly
and so the burden is on them to manage the object lifetime.

Reported-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 1fd7e41699 ("perf/core: Remove perf_cpu_context::unique_pmu")
Link: http://lkml.kernel.org/r/1507040450-7730-1-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10 10:06:54 +02:00
Johan Hovold
4294625e02 Bluetooth: avoid silent hci_bcm ACPI PM regression
The hci_bcm platform-device hack which was used to implement
power management for ACPI devices is being replaced by a
serial-device-bus implementation.

Unfortunately, when the corresponding change to the ACPI code lands (a
change that will stop enumerating and registering the serial-device-node
child as a platform device) PM will break silently unless serdev
TTY-port controller support has been enabled. Specifically, hciattach
(btattach) would still succeed, but power management would no longer
work.

Although this is strictly a runtime dependency, let's make the driver
depend on SERIAL_DEV_CTRL_TTYPORT, which is the particular serdev
controller implementation used by the ACPI devices currently managed by
this driver, to avoid breaking PM without anyone noticing.

Note that the driver already has a (build-time) dependency on the serdev
bus code.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-10-10 10:06:26 +02:00
Peter Zijlstra
c7e2f69d3e locking/selftest: Avoid false BUG report
The work-around for the expected failure is providing another failure :/

Only when CONFIG_PROVE_LOCKING=y do we increment unexpected_testcase_failures,
so only then do we need to decrement, otherwise we'll end up with a negative
number and that will again trigger a BUG (printout, not crash).

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: d82fed7529 ("locking/lockdep/selftests: Fix mixed read-write ABBA tests")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10 10:04:29 +02:00
Peter Zijlstra
8b405d5c5d locking/lockdep: Fix stacktrace mess
There is some complication between check_prevs_add() and
check_prev_add() wrt. saving stack traces. The problem is that we want
to be frugal with saving stack traces, since it consumes static
resources.

We'll only know in check_prev_add() if we need the trace, but we can
call into it multiple times. So we want to do on-demand and re-use.

A further complication is that check_prev_add() can drop graph_lock
and mess with our static resources.

In any case, the current state; after commit:

  ce07a9415f ("locking/lockdep: Make check_prev_add() able to handle external stack_trace")

is that we'll assume the trace contains valid data once
check_prev_add() returns '2'. However, as noted by Josh, this is
false, check_prev_add() can return '2' before having saved a trace,
this then result in the possibility of using uninitialized data.
Testing, as reported by Wu, shows a NULL deref.

So simplify.

Since the graph_lock() thing is a debug path that hasn't
really been used in a long while, take it out back and avoid the
head-ache.

Further initialize the stack_trace to a known 'empty' state; as long
as nr_entries == 0, nothing should deref entries. We can then use the
'entries == NULL' test for a valid trace / on-demand saving.

Analyzed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: ce07a9415f ("locking/lockdep: Make check_prev_add() able to handle external stack_trace")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10 10:04:28 +02:00
Sergei Shtylyov
3852560895 arm64: dts: renesas: eagle: add EtherAVB support
Define the Eagle board  dependent part of the EtherAVB device node.
Enable DHCP  and NFS root for the kernel booting.

Based  on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10 09:51:46 +02:00
Geert Uytterhoeven
eb5a507835 arm64: dts: r8a77995: Add INTC-EX device node
Add a device node for the Interrupt Controller for External Devices
(INTC-EX) on R-Car D3, which serves external IRQ pins IRQ[0-5].

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10 09:51:28 +02:00
Geert Uytterhoeven
c6a7fd9896 arm64: dts: r8a77970: Add INTC-EX device node
Add a device node for the Interrupt Controller for External Devices
(INTC-EX) on R-Car V3M, which serves external IRQ pins IRQ[0-5].

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10 09:51:27 +02:00
Geert Uytterhoeven
fdceea3c2a arm64: dts: r8a7796: Add INTC-EX device node
Add a device node for the Interrupt Controller for External Devices
(INTC-EX) on R-Car M3-W, which serves external IRQ pins IRQ[0-5].

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10 09:51:26 +02:00