If we defer this command as part of a link, we have to make sure that
the SQE data has been read upfront. Integrate the timeout remove op into
the prep handling to make it safe for SQE reuse.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we defer this command as part of a link, we have to make sure that
the SQE data has been read upfront. Integrate the async cancel op into
the prep handling to make it safe for SQE reuse.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we defer these commands as part of a link, we have to make sure that
the SQE data has been read upfront. Integrate the poll add/remove into
the prep handling to make it safe for SQE reuse.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The rules are as follows, if IOSQE_IO_HARDLINK is specified, then it's a
link and there is no need to set IOSQE_IO_LINK separately, though it
could be there. Add proper check and ensure that IOSQE_IO_HARDLINK
implies IOSQE_IO_LINK.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're currently not retaining sqe data for accept, fsync, and
sync_file_range. None of these commands need data outside of what
is directly provided, hence it can't go stale when the request is
deferred. However, it can get reused, if an application reuses
SQE entries.
Ensure that we retain the information we need and only read the sqe
contents once, off the submission path. Most of this is just moving
code into a prep and finish function.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We pass in req->sqe for all of them, no need to pass it in as the
request is always passed in. This is a necessary prep patch to be
able to cleanup/fix the request prep path.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some of these code paths assume that any force_nonblock == true issue
is not prepped, but that's not true if we did prep as part of link setup
earlier. Check if we already have an async context allocate before
setting up a new one.
Cleanup the async context setup in general, we have a lot of duplicated
code there.
Fixes: 03b1230ca1 ("io_uring: ensure async punted sendmsg/recvmsg requests copy data")
Fixes: f67676d160 ("io_uring: ensure async punted read/write requests copy iovec")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Libbpf is trying to recognize BPF program type based on its section name
during bpf_object__open() phase. This is not strictly enforced and user code
has ability to specify/override correct BPF program type after open. But if
BPF program is using custom section name, libbpf will still emit warnings,
which can be quite annoying to users. This patch reduces log level of
information messages emitted by libbpf if section name is not canonical. User
can still get a list of all supported section names as debug-level message.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191217234228.1739308-1-andriin@fb.com
The Allwinner SoCs have a AHCI controllers that is supported in Linux, with
a matching Device Tree binding.
Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
[robh: 'maxItems: 1' for resets]
Signed-off-by: Rob Herring <robh@kernel.org>
The older Allwinner SoCs have an MBUS controller that is used by Linux,
with a matching Device Tree binding.
Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>
The newer Allwinner SoCs have a camera controller that is supported in
Linux, with a matching Device Tree binding.
Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>
The Allwinner SoCs have a hardware video codec that is supported in Linux,
with a matching Device Tree binding.
Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>
The older Allwinner SoCs have a system controller that is supported in
Linux, with a matching Device Tree binding.
Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
[robh: fixup missing 'properties']
Signed-off-by: Rob Herring <robh@kernel.org>
The mmio-sram binding was added missing a few SRAM sections compatible for
allwinner SoCs. Let's add them.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>
Even though the generic mmio-sram binding has a list of the sections
compatible allowed, most device trees have more specific compatibles
attached to those generic ones.
This creates warnings at the moment, and we don't really want to cripple
the generic binding with all the vendor specific combinations that would
prove to be hard to maintain.
Let's allow additional compatibles for the sections, and then we can have
the vendor-specific bindings to reduce the scope of what's allowed exactly.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>
The generic SRAM binding currently only allows for child nodes of an SRAM
to be called sram too. However, these are also called sections in a number
of device tree, which seems a bit more accurate.
Let's change the name pattern to allow both.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>
The Allwinner SoCs have a USB PHY controller that is supported in Linux,
with a matching Device Tree binding.
Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>
Add direct support for the r8a77980 (V3H).
The V3H shares a common, compatible configuration with the r8a77970
(V3M) so that device info structure is reused.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
DT properties dual-lvds-even-pixels and dual-lvds-odd-pixels
can be used to work out if the driver needs to swap even
and odd pixels around.
This patch makes use of the return value from function
drm_of_lvds_get_dual_link_pixel_order to determine if we
need to swap odd and even pixels around for things to work
properly.
The dual_link boolean field from struct rcar_lvds is not
sufficient to describe the type of LVDS link anymore, since
we now have information related to pixel order, therefore
rename it to link_type and repurpose its usage to fit the
new requirements.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
For dual-LVDS configurations, it is now possible to mark the
DT port nodes for the sink with boolean properties (like
dual-lvds-even-pixels and dual-lvds-odd-pixels) to let drivers
know the encoders need to be configured in dual-LVDS mode.
Rework the implementation of rcar_lvds_parse_dt_companion
to make use of the DT markers while keeping backward
compatibility.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Dual-LVDS panels are mistakenly identified as bridges, this
commit replaces the current logic with a call to
drm_of_find_panel_or_bridge to sort that out.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
An LVDS dual-link connection is made of two links, with even
pixels transitting on one link, and odd pixels on the other
link. The device tree can be used to fully describe dual-link
LVDS connections between encoders and bridges/panels.
The sink of an LVDS dual-link connection is made of two ports,
the corresponding OF graph port nodes can be marked
with either dual-lvds-even-pixels or dual-lvds-odd-pixels,
and that fully describes an LVDS dual-link connection,
including pixel order.
drm_of_lvds_get_dual_link_pixel_order is a new helper
added by this patch, given the source port nodes it
returns DRM_LVDS_DUAL_LINK_EVEN_ODD_PIXELS if the source
port nodes belong to an LVDS dual-link connection, with even
pixels expected to be generated from the first port, and odd
pixels expected to be generated from the second port.
If the new helper returns DRM_LVDS_DUAL_LINK_ODD_EVEN_PIXELS,
odd pixels are expected to be generated from the first port,
and even pixels from the other port.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The R-Car LVDS encoder driver implements the bridge .mode_set()
operation for the sole purpose of storing the mode in the LVDS private
data, to be used later when enabling the encoder.
Switch to the bridge .atomic_enable() and .atomic_disable() operations
in order to access the global atomic state, and get the mode from the
state instead. Remove both the unneeded .mode_set() operation and the
display_mode and mode fields storing state data from the rcar_lvds
private structure.
As a side effect we get the CRTC from the state, replace the CRTC
pointer retrieved through the bridge's encoder that shouldn't be used by
atomic drivers.
While at it, clarify a few error messages in rcar_lvds_get_lvds_mode()
and turn them into warnings as they are not fatal.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Tested-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
The Renesas-specific "vsps" property lacks a vendor prefix.
Add a "renesas," prefix to comply with DT best practises.
Retain backward compatibility with old DTBs by falling back to "vsps"
when needed.
Fixes: 6d62ef3ac3 ("drm: rcar-du: Expose the VSP1 compositor through KMS planes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The Renesas-specific "vsps" property lacks a vendor prefix.
Add a "renesas," prefix to comply with DT best practises.
Move "renesas,vsps" below "renesas,cmms" to preserve alphabetical sort
order.
Fixes: 06711e6385 ("drm: rcar-du: Document the vsps property in the DT bindings")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Enable the GAMMA_LUT KMS property using the framework helpers to
register the property and set the associated gamma table maximum size.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Implement CMM handling in the crtc begin and enable atomic callbacks,
and enable CMM unit through the Display Extensional Functions
register at group setup time.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
[Fix printk format modifier for size_t variable]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Implement device tree parsing to collect the available CMM instances
described by the 'renesas,cmms' property. Associate CMMs with CRTCs and
store a mask of active CMMs in the DU group for later enablement.
Enforce the probe and suspend/resume ordering of DU and CMM by creating
a stateless device link between the two.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add a driver for the R-Car Display Unit Color Correction Module.
In most of Gen3 SoCs, each DU output channel is provided with a CMM unit
to perform image enhancement and color correction.
Add support for CMM through a driver that supports configuration of
the 1-dimensional LUT table. More advanced CMM features will be
implemented on top of this initial one.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Document the newly added 'renesas,cmms' property which accepts a list of
phandle and channel index pairs that point to the CMM units available
for each Display Unit output video channel.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add device tree bindings documentation for the Renesas R-Car Display
Unit Color Management Module.
CMM is the image enhancement module available on each R-Car DU video
channel on R-Car Gen2 and Gen3 SoCs (V3H and V3M excluded).
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Convert the STM32 DMAMUX binding to DT schema format using json-schema
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the STM32 MDMA binding to DT schema format using json-schema
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the STM32 DMA binding to DT schema format using json-schema
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the ML-AHB bus bindings to DT schema format using json-schema
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the STM32 RTC binding to DT schema format using json-schema
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
DT property definitions must be under a 'properties' keyword. This was
missing for 'snps,tso' in an if/then clause. A meta-schema fix will
catch future errors like this.
Fixes: 7db3545aef ("dt-bindings: net: stmmac: Convert the binding to a schemas")
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
The Gen11+ and the legacy function differ in the register and value
written to interrupt the GuC. However, while on older gen the value
matches a bit on the register, on Gen11+ the value is a SW defined
payload that is sent to the FW. Since the FW behaves the same no matter
what value we pass to it, we can just write the same thing on all gens
and get rid of the function pointer by saving the register offset.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217012316.13271-6-daniele.ceraolospurio@intel.com
Since we started using CT buffers on all gens, the function pointers can
only be set to either the _nop() or the _ct() functions. Since the
_nop() case applies to when the CT are disabled, we can just handle that
case in the _ct() functions and call them directly.
v2: keep intel_guc_send() and make the CT send/receive functions work on
intel_guc_ct. (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217012316.13271-5-daniele.ceraolospurio@intel.com
For better isolation of the request tracking from the rest of the
CT-related data.
v2: split to separate patch, move next_fence to substructure (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217012316.13271-4-daniele.ceraolospurio@intel.com
The GuC supports having multiple CT buffer pairs and we designed our
implementation with that in mind. However, the different channels are not
processed in parallel within the GuC, so there is very little advantage
in having multiple channels (independent locks?), compared to the
drawbacks (one channel can starve the other if messages keep being
submitted to it). Given this, it is unlikely we'll ever add a second
channel and therefore we can simplify our code by removing the
flexibility.
v2: split substructure grouping to separate patch, improve docs (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217012316.13271-3-daniele.ceraolospurio@intel.com
We track the status of the GuC much more closely now and we expect the
enable/disable functions to be correctly called only once. If this isn't
true we do want to flag it as a flow failure (via the BUG_ON in the ctch
functions) and not silently ignore the call.
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217012316.13271-2-daniele.ceraolospurio@intel.com
The only difference from the GuC POV between guc_communication_stop and
guc_communication_disable is that the former can be called after GuC
has been reset. Instead of having two separate paths, we can just skip
the call into GuC in the disabling path and re-use that.
Note that by using the disable() path instead of the stop() one there
are two additional changes in SW side for the stop path:
- interrupts are now disabled before disabling the CT, which is ok
because we do not want interrupts with CT disabled;
- guc_get_mmio_msg() is called in the stop case as well, which is ok
because if there are errors before the reset we do want to record
them.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217012316.13271-1-daniele.ceraolospurio@intel.com
This fixes two issues with the newly introduced libbpf_common.h file:
- The header failed to include <string.h> for the definition of memset()
- The new file was not included in the install_headers rule in the Makefile
Both of these issues cause breakage when installing libbpf with 'make
install' and trying to use it in applications.
Fixes: 544402d4b4 ("libbpf: Extract common user-facing helpers")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191217112810.768078-1-toke@redhat.com
Any user of wkup_m3_ipc calls wkup_m3_ipc_get to get a handle and this
checks the value of the static variable m3_ipc_state to see if the
wkup_m3 is ready. Currently this is populated during probe before
rproc_boot has been called, meaning there is a window of time that
wkup_m3_ipc_get can return a valid handle but the wkup_m3 itself is not
ready, leading to invalid IPC calls to the wkup_m3 and system
instability.
To avoid this, move the population of the m3_ipc_state variable until
after rproc_boot has succeeded to guarantee a valid and usable handle
is always returned.
Reported-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
On am57xx-beagle-x15, 5V0 is connected to P16, P17, P18 and P19
connectors. On am57xx-evm, 5V0 regulator is used to get 3V6 regulator
which is connected to the COMQ port. Model 5V0 regulator here in order
for it to be used in am57xx-evm to model 3V6 regulator.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Similarly to bpftool/libbpf output, make selftests/bpf output succinct
per-item output line. Output is roughly as follows:
$ make
...
CLANG-LLC [test_maps] pyperf600.o
CLANG-LLC [test_maps] strobemeta.o
CLANG-LLC [test_maps] pyperf100.o
EXTRA-OBJ [test_progs] cgroup_helpers.o
EXTRA-OBJ [test_progs] trace_helpers.o
BINARY test_align
BINARY test_verifier_log
GEN-SKEL [test_progs] fexit_bpf2bpf.skel.h
GEN-SKEL [test_progs] test_global_data.skel.h
GEN-SKEL [test_progs] sendmsg6_prog.skel.h
...
To see the actual command invocation, verbose mode can be turned on with V=1
argument:
$ make V=1
... very verbose output ...
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191217061425.2346359-1-andriin@fb.com
If we compile tools/acpi target in the top source directory, we'd get a
compilation error showing as bellow:
# make tools/acpi
DESCEND power/acpi
DESCEND tools/acpidbg
CC tools/acpidbg/acpidbg.o
Assembler messages:
Fatal error: can't create /home/lzy/kernel-upstream/power/acpi/\
tools/acpidbg/acpidbg.o: No such file or directory
../../Makefile.rules:26: recipe for target '/home/lzy/kernel-upstream/\
power/acpi/tools/acpidbg/acpidbg.o' failed
make[3]: *** [/home/lzy/kernel-upstream//power/acpi/tools/acpidbg/\
acpidbg.o] Error 1
Makefile:19: recipe for target 'acpidbg' failed
make[2]: *** [acpidbg] Error 2
Makefile:54: recipe for target 'acpi' failed
make[1]: *** [acpi] Error 2
Makefile:1607: recipe for target 'tools/acpi' failed
make: *** [tools/acpi] Error 2
Fixes: d5a4b1a540 ("tools/power/acpi: Remove direct kernel source include reference")
Signed-off-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
First set of fixes for v5.5. Fixing security issues, some regressions
and few major bugs.
mwifiex
* security fix for handling country Information Elements (CVE-2019-14895)
* security fix for handling TDLS Information Elements
ath9k
* fix endian issue with ath9k_pci_owl_loader
mt76
* fix default mac address handling
iwlwifi
* fix merge damage which lead to firmware crashing during boot on some devices
* fix device initialisation regression on some devices
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJd+P4eAAoJEG4XJFUm622bnOQH/RHSFFQNjxfPboZoozKb0/mT
6YtrG+0K1z8E21Os2bd+s4aRJgq1oGKDocMie5y53M38qQ5N3FchzcGopNRCRy/a
gF1PzEqceOysbEtPOx4yI+c0Gfi7rS0SjEyf2XKGowXsoIZh4j+1xlWbF/JtHt6n
J901W1GW0ZUCHaP8KuZcbsS2nfdV8tFW2NQW3Xuhy+nOdBhNRL/lKSvlhZLCCAfY
f1eJrB0rAzQpCqw8Wuz2JzWsxBiTt+6Ucuzv4EkFVrt7Xnj00feghTKJkVDqa+fL
B9hTiiYh8sLGJkYHsZLDZIzAdOW8jmun1I+XFsjdl7ucLRYz6U8NL9jc6oIGK00=
=KJmM
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-2019-12-17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.5
First set of fixes for v5.5. Fixing security issues, some regressions
and few major bugs.
mwifiex
* security fix for handling country Information Elements (CVE-2019-14895)
* security fix for handling TDLS Information Elements
ath9k
* fix endian issue with ath9k_pci_owl_loader
mt76
* fix default mac address handling
iwlwifi
* fix merge damage which lead to firmware crashing during boot on some devices
* fix device initialisation regression on some devices
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
