This activates the device tree-based cpufreq driver that
Ux500 is using and enables the schedutil and ondemand
governors with schedutil as default. This works fine in
the setups I have tested.
Link: https://lore.kernel.org/r/20191217202648.23206-1-linus.walleij@linaro.org
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit 77373d49de ("net: dsa: Move the phylink driver calls into
port.c") moved and exported a bunch of symbols, but they are not used
outside of net/dsa/port.c at the moment, so no reason to export them.
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Get_pid_task() needs to be paired with a put_pid or we leak a pid
reference every time a banned client tries to create a context.
v2:
* task_pid_nr helper exists! (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: b083a0870c ("drm/i915: Add per client max context ban limit")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217170933.8108-1-tvrtko.ursulin@linux.intel.com
In the commit referred to below we eliminated sending of the 'gap'
indicator in regular ACK messages, reserving this to explicit NACK
ditto.
Unfortunately we missed to also eliminate building of the 'gap block'
area in ACK messages. This area is meant to report gaps in the
received packet sequence following the initial gap, so that lost
packets can be retransmitted earlier and received out-of-sequence
packets can be released earlier. However, the interpretation of those
blocks is dependent on a complete and correct sequence of gaps and
acks. Hence, when the initial gap indicator is missing a single gap
block will be interpreted as an acknowledgment of all preceding
packets. This may lead to packets being released prematurely from the
sender's transmit queue, with easily predicatble consequences.
We now fix this by not building any gap block area if there is no
initial gap to report.
Fixes: commit 02288248b0 ("tipc: eliminate gap indicator from ACK messages")
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a series I worked on with Baolin in 2017 and 2018, but we
never quite managed to finish up the last pieces. During the
ALSA developer meetup at ELC-E 2018 in Edinburgh, a decision was
made to go with this approach for keeping best compatibility
with existing source code, and then I failed to follow up by
resending the patches.
Now I have patches for all remaining time_t uses in the kernel,
so it's absolutely time to revisit them. I have done more
review of the patches myself and found a couple of minor issues
that I have fixed up, otherwise the series is still the same as
before.
Conceptually, the idea of these patches is:
- 64-bit applications should see no changes at all, neither
compile-time nor run-time.
- 32-bit code compiled with a 64-bit time_t currently
does not work with ALSA, and requires kernel changes and/or
sound/asound.h changes
- Most 32-bit code using these interfaces will work correctly
on a modified kernel, with or without the uapi header changes.
- 32-bit code using SNDRV_TIMER_IOCTL_TREAD requires the
updated header file for 64-bit time_t support
- 32-bit i386 user space with 64-bit time_t is broken for
SNDRV_PCM_IOCTL_STATUS, SNDRV_RAWMIDI_IOCTL_STATUS and
SNDRV_PCM_IOCTL_SYNC_PTR because of i386 alignment. This is also
addressed by the updated uapi header.
- PCM mmap is currently supported on native x86 kernels
(both 32-bit and 64-bit) but not for compat mode. This series breaks
the 32-bit native mmap support for 32-bit time_t, but instead allows
it for 64-bit time_t on both native and compat kernels. This seems to
be the best trade-off, as mmap support is optional already, and most
32-bit code runs in compat mode anyway.
- I've tried to avoid breaking compilation of 32-bit code
as much as possible. Anything that does break however is likely code
that is already broken on 64-bit time_t and needs source changes to
fix them.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git y2038-alsa-v8
[2] https://lore.kernel.org/lkml/CAK8P3a2Os66+iwQYf97qh05W2JP8rmWao8zmKoHiXqVHvyYAJA@mail.gmail.com/T/#m6519cb07cfda08adf1dedea6596bb98892b4d5dc
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Changes since v7: (Arnd):
- Fix a typo found by Ben Hutchings
Changes since v6: (Arnd):
- Add a patch to update the API versions
- Hide a timespec reference in #ifndef __KERNEL__ to remove the
last reference to time_t
- Use a more readable way to do padding and describe it in the
changelog
- Rebase to linux-5.5-rc1, changing include/sound/soc-component.h
and sound/drivers/aloop.c as needed.
Changes since v5 (Arnd):
- Rebased to linux-5.4-rc4
- Updated to completely remove timespec and time_t references from alsa
- found and fixed a few bugs
Changes since v4 (Baolin):
- Add patch 5 to change trigger_tstamp member of struct snd_pcm_runtime.
- Add patch 8 to change internal timespec.
- Add more explanation in commit message.
- Use ktime_get_real_ts64() in patch 6.
- Split common code out into a separate function in patch 6.
- Fix tu->tread bug in patch 6 and remove #if __BITS_PER_LONG == 64 macro.
Changes since v3:
- Move struct snd_pcm_status32 to pcm.h file.
- Modify comments and commit message.
- Add new patch2 ~ patch6.
Changes since v2:
- Renamed all structures to make clear.
- Remove CONFIG_X86_X32 macro and introduced new compat_snd_pcm_status64_x86_32.
Changes since v1:
- Add one macro for struct snd_pcm_status_32 which only active in 32bits kernel.
- Convert pcm_compat.c to use struct snd_pcm_status_64.
- Convert pcm_native.c to use struct snd_pcm_status_64.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=58V0
-----END PGP SIGNATURE-----
Merge tag 'y2038-alsa-v8-signed' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground into for-next
ALSA: Fix year 2038 issue for sound subsystem
This is a series I worked on with Baolin in 2017 and 2018, but we
never quite managed to finish up the last pieces. During the
ALSA developer meetup at ELC-E 2018 in Edinburgh, a decision was
made to go with this approach for keeping best compatibility
with existing source code, and then I failed to follow up by
resending the patches.
Now I have patches for all remaining time_t uses in the kernel,
so it's absolutely time to revisit them. I have done more
review of the patches myself and found a couple of minor issues
that I have fixed up, otherwise the series is still the same as
before.
Conceptually, the idea of these patches is:
- 64-bit applications should see no changes at all, neither
compile-time nor run-time.
- 32-bit code compiled with a 64-bit time_t currently
does not work with ALSA, and requires kernel changes and/or
sound/asound.h changes
- Most 32-bit code using these interfaces will work correctly
on a modified kernel, with or without the uapi header changes.
- 32-bit code using SNDRV_TIMER_IOCTL_TREAD requires the
updated header file for 64-bit time_t support
- 32-bit i386 user space with 64-bit time_t is broken for
SNDRV_PCM_IOCTL_STATUS, SNDRV_RAWMIDI_IOCTL_STATUS and
SNDRV_PCM_IOCTL_SYNC_PTR because of i386 alignment. This is also
addressed by the updated uapi header.
- PCM mmap is currently supported on native x86 kernels
(both 32-bit and 64-bit) but not for compat mode. This series breaks
the 32-bit native mmap support for 32-bit time_t, but instead allows
it for 64-bit time_t on both native and compat kernels. This seems to
be the best trade-off, as mmap support is optional already, and most
32-bit code runs in compat mode anyway.
- I've tried to avoid breaking compilation of 32-bit code
as much as possible. Anything that does break however is likely code
that is already broken on 64-bit time_t and needs source changes to
fix them.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git y2038-alsa-v8
[2] https://lore.kernel.org/lkml/CAK8P3a2Os66+iwQYf97qh05W2JP8rmWao8zmKoHiXqVHvyYAJA@mail.gmail.com/T/#m6519cb07cfda08adf1dedea6596bb98892b4d5dc
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Changes since v7: (Arnd):
- Fix a typo found by Ben Hutchings
Changes since v6: (Arnd):
- Add a patch to update the API versions
- Hide a timespec reference in #ifndef __KERNEL__ to remove the
last reference to time_t
- Use a more readable way to do padding and describe it in the
changelog
- Rebase to linux-5.5-rc1, changing include/sound/soc-component.h
and sound/drivers/aloop.c as needed.
Changes since v5 (Arnd):
- Rebased to linux-5.4-rc4
- Updated to completely remove timespec and time_t references from alsa
- found and fixed a few bugs
Changes since v4 (Baolin):
- Add patch 5 to change trigger_tstamp member of struct snd_pcm_runtime.
- Add patch 8 to change internal timespec.
- Add more explanation in commit message.
- Use ktime_get_real_ts64() in patch 6.
- Split common code out into a separate function in patch 6.
- Fix tu->tread bug in patch 6 and remove #if __BITS_PER_LONG == 64 macro.
Changes since v3:
- Move struct snd_pcm_status32 to pcm.h file.
- Modify comments and commit message.
- Add new patch2 ~ patch6.
Changes since v2:
- Renamed all structures to make clear.
- Remove CONFIG_X86_X32 macro and introduced new compat_snd_pcm_status64_x86_32.
Changes since v1:
- Add one macro for struct snd_pcm_status_32 which only active in 32bits kernel.
- Convert pcm_compat.c to use struct snd_pcm_status_64.
- Convert pcm_native.c to use struct snd_pcm_status_64.
Upon reusing the ptp_qoriq driver, the ptp_qoriq_free() function was
used on the remove path to free any allocated resources.
The ptp_qoriq IRQ is among these resources that are freed in
ptp_qoriq_free() even though it is also a managed one (allocated using
devm_request_threaded_irq).
Drop the resource managed version of requesting the IRQ in order to not
trigger a double free of the interrupt as below:
[ 226.731005] Trying to free already-free IRQ 126
[ 226.735533] WARNING: CPU: 6 PID: 749 at kernel/irq/manage.c:1707
__free_irq+0x9c/0x2b8
[ 226.743435] Modules linked in:
[ 226.746480] CPU: 6 PID: 749 Comm: bash Tainted: G W
5.4.0-03629-gfd7102c32b2c-dirty #912
[ 226.755857] Hardware name: NXP Layerscape LX2160ARDB (DT)
[ 226.761244] pstate: 40000085 (nZcv daIf -PAN -UAO)
[ 226.766022] pc : __free_irq+0x9c/0x2b8
[ 226.769758] lr : __free_irq+0x9c/0x2b8
[ 226.773493] sp : ffff8000125039f0
(...)
[ 226.856275] Call trace:
[ 226.858710] __free_irq+0x9c/0x2b8
[ 226.862098] free_irq+0x30/0x70
[ 226.865229] devm_irq_release+0x14/0x20
[ 226.869054] release_nodes+0x1b0/0x220
[ 226.872790] devres_release_all+0x34/0x50
[ 226.876790] device_release_driver_internal+0x100/0x1c0
Fixes: d346c9e86d ("dpaa2-ptp: reuse ptp_qoriq driver")
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When nla_put_xxx() fails under nla_nest_start_noflag(),
nla_nest_cancel() should be called, so that the skb can
be trimmed properly.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch is to add the nest attr OPTS_ERSPAN/VXLAN when dumping
KEY_OPTS, and it would be helpful when parsing in userpace. Also,
this is needed for supporting multiple geneve opts in the future
patches.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This is not necessary, but it'll be easier to parse in userspace,
also given that other places like act_tunnel_key, cls_flower and
ip_tunnel_core are also doing so.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ERSPAN_VERSION is an attribute parsed in kernel side, nla_policy
type should be added for it, like other attributes.
Fixes: af308b94a2 ("netfilter: nf_tables: add tunnel support")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
info->key.tp_src and tp_dst are __be16, when using nla_put_be16()
to dump them, htons() is not needed, so remove it in this patch.
Fixes: af308b94a2 ("netfilter: nf_tables: add tunnel support")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Amend kerneldoc of struct net_device to fix a "make htmldocs" warning:
include/linux/netdevice.h:2045: warning: Function parameter or member 'nf_hooks_ingress' not described in 'net_device'
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If CONFIG_NETFILTER_INGRESS is not enabled, nf_ingress() becomes a no-op
because it solely contains an if-clause calling nf_hook_ingress_active(),
for which an empty inline stub exists in <linux/netfilter_ingress.h>.
All the symbols used in the if-clause's body are still available even if
CONFIG_NETFILTER_INGRESS is not enabled.
The additional "#ifdef CONFIG_NETFILTER_INGRESS" in nf_ingress() is thus
unnecessary, so drop it.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Ajay Gupta says:
====================
net: stmmac: dwc-qos: ACPI device support
Version 3 of patches have fixes for comments from Jakub Kicinski.
These two changes are needed to enable ACPI based devices to use stmmac
driver. First patch is to use generic device api (device_*) instead of
device tree based api (of_*). Second patch avoids clock and reset accesses
for Tegra ACPI based devices. ACPI interface will be used to access clock
and reset for Tegra ACPI devices in later patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There are no clocks, resets or gpios referenced by Tegra ACPI
device so don't access clocks, resets or gpios interface with
ACPI device.
Clocks, resets and GPIOs for ACPI devices will be handled via
ACPI interface.
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use generic device api so that driver can work both with DT
or ACPI based devices.
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Biao Huang says:
====================
net-next: stmmac: dwmac-mediatek: add more support for RMII
changes in v2:
PATCH 1/2 net-next: stmmac: mediatek: add more support for RMII
As Andrew's comments, add the "rmii_internal" clock to the list of clocks.
PATCH 2/2 net-next: dt-binding: dwmac-mediatek: add more description for RMII
document the "rmii_internal" clock in dt-bindings
rewrite the sample dts in dt-bindings.
v1:
This series is for support RMII when MT2712 SoC provides the reference clock.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
MT2712 SoC can provide RMII reference clock,
so add corresponding description in dt-binding.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MT2712 SoC can provide the rmii reference clock, and the clock
will output from TXC pin only, which means ref_clk pin of external
PHY should connect to TXC pin in this case.
Add corresponding clock and timing settings.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=AnHL
-----END PGP SIGNATURE-----
Merge tag 'for-5.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A mix of regression fixes and regular fixes for stable trees:
- fix swapped error messages for qgroup enable/rescan
- fixes for NO_HOLES feature with clone range
- fix deadlock between iget/srcu lock/synchronize srcu while freeing
an inode
- fix double lock on subvolume cross-rename
- tree log fixes
* fix missing data checksums after replaying a log tree
* also teach tree-checker about this problem
* skip log replay on orphaned roots
- fix maximum devices constraints for RAID1C -3 and -4
- send: don't print warning on read-only mount regarding orphan
cleanup
- error handling fixes"
* tag 'for-5.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: send: remove WARN_ON for readonly mount
btrfs: do not leak reloc root if we fail to read the fs root
btrfs: skip log replay on orphaned roots
btrfs: handle ENOENT in btrfs_uuid_tree_iterate
btrfs: abort transaction after failed inode updates in create_subvol
Btrfs: fix hole extent items with a zero size after range cloning
Btrfs: fix removal logic of the tree mod log that leads to use-after-free issues
Btrfs: make tree checker detect checksum items with overlapping ranges
Btrfs: fix missing data checksums after replaying a log tree
btrfs: return error pointer from alloc_test_extent_buffer
btrfs: fix devs_max constraints for raid1c3 and raid1c4
btrfs: tree-checker: Fix error format string for size_t
btrfs: don't double lock the subvol_sem for rename exchange
btrfs: handle error in btrfs_cache_block_group
btrfs: do not call synchronize_srcu() in inode_tree_del
Btrfs: fix cloning range with a hole when using the NO_HOLES feature
btrfs: Fix error messages in qgroup_rescan_init
Russell King says:
====================
improve clause 45 support in phylink
These three patches improve the clause 45 support in phylink, fixing
some corner cases that have been noticed with the addition of SFP+
NBASE-T modules, but are actually a little more wisespread than I
initially realised.
The first issue was spotted with a NBASE-T PHY on a SFP+ module plugged
into a mvneta platform. When these PHYs are not operating in USXGMII
mode, but are in a single-lane Serdes mode, they will switch between
one of several different PHY interface modes.
If we call the MAC validate() function with the current PHY interface
mode, we will restrict the supported and advertising masks to the link
modes that the current PHY interface mode supports. For example, if we
determine that we want to start the PHY with an interface mode of
2500BASE-X, then this setup will restrict the advertisement and
supported masks to 2.5G speed link modes.
What we actually want for these PHYs is to allow them to support any
link modes that the PHY supports _and_ the MAC is also capable of
supporting. Without knowing the details of the PHY interface modes that
may be used, we can do this by using PHY_INTERFACE_MODE_NA to validate
and restrict the link modes to any that the MAC supports.
mvpp2 with the 88X3310 PHY avoids this problem, because the validate()
implementation allows all MAC supported speeds not only for
PHY_INTERFACE_MODE_NA, but also for XAUI and 10GKR modes.
The first patch addresses this; current MAC drivers should continue to
work as-is, but there will be a follow-on patch to fixup at least
mvpp2.
The second issue addresses a very similar problem that occurs when
trying to use ethtool to alter the advertisement mask - we call
the MAC validate() function with the current interface mode, the
current support and requested advertisement masks. This immediately
restricts the advertisement in the same way as the above.
This patch series addresses both issues, although the patches are not
in the above order.
v2: fix patch 3 missing 1G link modes for SGMII and RGMII interface
modes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix up the mvpp2 validate implementation to adopt the same behaviour as
mvneta:
- only allow the link modes that the specified PHY interface mode
supports with the exception of 1000base-X and 2500base-X.
- use the basex helper to deal with SFP modules that can be switched
between 1000base-X vs 2500base-X.
This gives consistent behaviour between mvneta and mvpp2.
This commit depends on "net: phylink: extend clause 45 PHY validation
workaround" so is not marked for backporting to stable kernels.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit e45d1f5288 ("net: phylink: support Clause 45 PHYs on SFP+
modules") added a workaround to support clause 45 PHYs which
dynamically switch their interface mode on SFP+ modules. This was
implemented by validating the PHYs supported/advertising using
PHY_INTERFACE_MODE_NA, rather than the specific interface mode that
we attached the PHY with.
However, we already have a situation where phylink is used to connect
a Marvell 88X3310 PHY which also behaves in exactly the same way, but
which seemingly doesn't need this. The reason seems to be that the
mvpp2 driver sets a whole bunch of link modes for
PHY_INTERFACE_MODE_10GKR down to 10Mb/s, despite 10GBASE-R not actually
supporting anything but 10Gb/s speeds.
When testing with drivers that (correctly) take the mvneta approach,
where the validate() method only returns what can be supported /
advertised for the specified link mode, we find that Clause 45 PHYs do
not behave as we expect: their advertisement is restricted to what
the current link will support, rather than what the PHY supports
through its dynamic switching.
Extend this workaround to all such cases; if we have a Clause 45 PHY
attaching via any means, except in USXGMII, XAUI and RXAUI which are
all unable to support this dynamic switching or have other solutions
to it, then we need to validate using PHY_INTERFACE_MODE_NA.
This should allow mvpp2 to switch to a more conformant validate()
implementation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
While testing ethtool with the Methode DM7052 module, it was noticed
that attempting to set the advertising mask results in the mask being
truncated to the support offered by the currently chosen PHY interface
mode.
When a PHY dynamically changes the PHY interface mode, limiting the
advertising mask in this way is not correct - if the PHY happened to
negotiate 10GBASE-T, and selected 10GBASE-R as the host interface, we
don't want to restrict the advertisement to just 10GBASE-* modes.
Rework setting the advertisement to take account of this; do not pass
the requested advertisement through phylink_validate(), but rely on
the advertisement restriction (supported mask) set when the PHY was
initially setup.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The comment says "this should never fail", but it definitely can fail
when you have odd initial boot filesystems, or kernel configurations.
So get the error handling right: filp_open() returns an error pointer.
Reported-by: Jesse Barnes <jsbarnes@google.com>
Reported-by: youling 257 <youling257@gmail.com>
Fixes: 8243186f0c ("fs: remove ksys_dup()")
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A small set of fixes for mostly minor issues here, the only real code
ones are Wen Yang's fixes for error handling in the core and Christian
Marussi's list_voltage() change which is a fix for disruptively bad
performance for regulators with continuous voltage control (which are
rare).
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl34yr4THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0KJyB/97dTSIk+gJxwFSc9tTPbMvSGvGqoEL
AUE8JSHVNqav9IdFKwtzxa6dnjVy1U23ySemeOAvabmLmyJjoIRMJAeA10+OwcMl
2dq3j/3z6Vl305QSVNu3yMcxp2XtQ8nhKOpNz+rDGwRAvr08YBjdrCPv4dbiv/ei
G7z7sOwcNNACE7CNGat3kOh9cOJm3wVzls1bF5Ix+kDlWH6v591GSY1MMXdhx6Tj
RS9HCjj8Gp4O+vnJH4r/AVkOyZp8SOSOje/+81pF68wc2g+S7XV8hE4kDipRlHS3
4aKpBbfyA4twjZ4AOCVGTwJrGXh6W7GhDlrbWCYyQ3y2hOfwgbh8sKzo
=Lx6m
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A small set of fixes for mostly minor issues here, the only real code
ones are Wen Yang's fixes for error handling in the core and Christian
Marussi's list_voltage() change which is a fix for disruptively bad
performance for regulators with continuous voltage control (which are
rare)"
* tag 'regulator-fix-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rn5t618: fix module aliases
regulator: max77650: add of_match table
regulator: core: avoid unneeded .list_voltage calls
regulator: s5m8767: Fix a warning message
regulator: core: fix regulator_register() error paths to properly release rdev
regulator: fix use after free issue
A relatively large set of fixes here, the biggest part of it is for
fallout from the GPIO descriptor rework that affected several of the
devices with usable native chip select support. There's also some new
PCI IDs for Intel Jasper Lake devices.
The conversion to platform_get_irq() in the fsl driver is an incremental
fix for build errors introduced on SPARC by the earlier fix for error
handling in probe in that driver.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl34xt8THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0D64B/91GGhGgNybvExhls79YKQx9STnv8Vl
sIVgbnVxnTHrAa+s/5ML0T8LzH9W5KcBUuL+KCd0oMdaE9QZSCKGdraEqDJz7Ie4
iHbBSAtwL0tegbyM+J4oKC3wen3Lg1u1iwn4Plo2fVKEah7zG6gdneQcf454EnEF
om2Sj2K7tqoqN1jIl0j/FGQtlDXvhzp3m+CyGakjzsBvINmSGixrO5Lit/dx3qSf
xkhLDWZqUk3UatusPXhpJJVxWPuVvT5NQkvUYDte1rHxrVdolYQctwBRPN/uZ2hq
FcLzUbWVFx7p3cDqvuQ6XTptpue4njnaPOT/LW6tud4BexlaV1q83XYs
=gPXn
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A relatively large set of fixes here, the biggest part of it is for
fallout from the GPIO descriptor rework that affected several of the
devices with usable native chip select support. There's also some new
PCI IDs for Intel Jasper Lake devices.
The conversion to platform_get_irq() in the fsl driver is an
incremental fix for build errors introduced on SPARC by the earlier
fix for error handling in probe in that driver"
* tag 'spi-fix-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fsl: use platform_get_irq() instead of of_irq_to_resource()
spi: nxp-fspi: Ensure width is respected in spi-mem operations
spi: spi-ti-qspi: Fix a bug when accessing non default CS
spi: fsl: don't map irq during probe
spi: spi-cavium-thunderx: Add missing pci_release_regions()
spi: sprd: Fix the incorrect SPI register
gpiolib: of: Make of_gpio_spi_cs_get_count static
spi: fsl: Handle the single hardwired chipselect case
gpio: Handle counting of Freescale chipselects
spi: fsl: Fix GPIO descriptor support
spi: dw: Correct handling of native chipselect
spi: cadence: Correct handling of native chipselect
spi: pxa2xx: Add support for Intel Jasper Lake
The video DSI mode had not really been tested. These fixes makes
it more likely to work on real hardware:
- Put the active width (x width) in the right bits and the VSA
(vertical sync active) in the right bits (those were swapped).
- Calculate the packet sizes in bytes as in the vendor driver,
rather than in bits. Test the calculations agains a
spreadsheet and confirmed by debug prints to be reasonable.
- Also verified the register values with relative confidence
to register dumps from the Samsung GT-I8190 boot loader
graphics. We are not identical but not off by far either.
- Error out if the current mode and refresh frequency doesn't
work out. (In the future we may simply want to scale down
the vrefresh.)
- Handle negative result in front/back/sync packages and fall
back to zero like in the vendor driver.
- Put in lots of clarifying comments and references to the
documentation where the code is hard to understand.
- Set the DSI_VID_VCA_SETTING2 field
DSI_VID_VCA_SETTING2_MAX_LINE_LIMIT to blkline_pck - 6 as in
the vendor driver and mask the field properly.
- Set the DSI_VID_VCA_SETTING1 field
DSI_VID_VCA_SETTING1_MAX_BURST_LIMIT to blkeol_pck - 6 to
blkeol_duration - 6 as in the vendor driver.
Cc: Stephan Gerhold <stephan@gerhold.net>
Fixes: 5fc537bfd0 ("drm/mcde: Add new driver for ST-Ericsson MCDE")
Link: https://patchwork.freedesktop.org/patch/msgid/20191217150959.17215-1-linus.walleij@linaro.org
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The initial commit followed by the fix didn't
take into consideration the case:
CONFIG_DRM_PANEL=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_DRM_I915=y
where symbol devm_of_find_backlight() is not reachable from DRM subsystem.
Quick fix is to avoid drm_panel_of_backlight() from exporting in such case.
Fixes: 907aa265fd ("drm/drm_panel: fix EXPORT of drm_panel_of_backlight")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217140721.42432-1-andriy.shevchenko@linux.intel.com
We must allow for the fact that iov_iter_write() could have returned
a short write (e.g. if there was an ENOSPC issue).
Fixes: d890be159a "nfsd: Add I/O trace points in the NFSv4 write path"
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Omar Sandoval reported that a 4G fallocate on the realtime device causes
filesystem shutdowns due to a log reservation overflow that happens when
we log the rtbitmap updates. Factor rtbitmap/rtsummary updates into the
the tr_write and tr_itruncate log reservation calculation.
"The following reproducer results in a transaction log overrun warning
for me:
mkfs.xfs -f -r rtdev=/dev/vdc -d rtinherit=1 -m reflink=0 /dev/vdb
mount -o rtdev=/dev/vdc /dev/vdb /mnt
fallocate -l 4G /mnt/foo
Reported-by: Omar Sandoval <osandov@osandov.com>
Tested-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Pull x86 fix from Ingo Molnar:
"Fix kexec booting with certain EFI memory map layouts"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Update e820 with reserved EFI boot services data to fix kexec breakage
Fix the following sparse warning.
drivers/dma-buf/dma-heap.c:109:14: warning: symbol 'dma_heap_ioctl_cmds'
was not declared. Should it be static?
Acked-by: Andrew F. Davis <afd@ti.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
[sumits: rebased over IOCTL rename patches]
Link: https://patchwork.freedesktop.org/patch/msgid/20191217190822.1969-1-sumit.semwal@linaro.org
Pull timer fixes from Ingo Molnar:
"Add HPET quirks for the Intel 'Coffee Lake H' and 'Ice Lake' platforms"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel: Disable HPET on Intel Ice Lake platforms
x86/intel: Disable HPET on Intel Coffee Lake H platforms
Pull scheduler fix from Ingo Molnar:
"Fix the guest-nice cpustat values in /proc"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/cputime, proc/stat: Fix incorrect guest nice cpustat value
Pull perf tooling fixes from Ingo Molnar:
"These are all perf tooling changes: most of them are fixes.
Note that the large CPU count related fixes go beyond regression
fixes, but the IPI-flood symptoms are severe enough that I think
justifies their inclusion"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
perf vendor events s390: Remove name from L1D_RO_EXCL_WRITES description
perf vendor events s390: Fix counter long description for DTLB1_GPAGE_WRITES
libtraceevent: Allow custom libdir path
perf header: Fix false warning when there are no duplicate cache entries
perf metricgroup: Fix printing event names of metric group with multiple events
perf/x86/pmu-events: Fix Kernel_Utilization metric
perf top: Do not bail out when perf_env__read_cpuid() returns ENOSYS
perf arch: Make the default get_cpuid() return compatible error
tools headers kvm: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Update tools's copy of drm.h headers
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
perf inject: Fix processing of ID index for injected instruction tracing
perf report: Bail out --mem-mode if mem info is not available
perf report: Make -F more strict like -s
perf report/top TUI: Replace pr_err() with ui__error()
libtraceevent: Copy pkg-config file to output folder when using O=
libtraceevent: Fix lib installation with O=
perf kvm: Clarify the 'perf kvm' -i and -o command line options
tools arch x86: Sync asm/cpufeatures.h with the kernel sources
perf beauty: Add CLEAR_SIGHAND support for clone's flags arg
...
Pull locking fixes from Ingo Molnar:
"Tone down mutex debugging complaints, and annotate/fix spinlock
debugging data accesses for KCSAN"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "locking/mutex: Complain upon mutex API misuse in IRQ contexts"
locking/spinlock/debug: Fix various data races
Pull EFI fixes from Ingo Molnar:
"Protect presistent EFI memory reservations from kexec, fix EFIFB early
console, EFI stub graphics output fixes and other misc fixes."
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Don't attempt to map RCI2 config table if it doesn't exist
efi/earlycon: Remap entire framebuffer after page initialization
efi: Fix efi_loaded_image_t::unload type
efi/gop: Fix memory leak in __gop_query32/64()
efi/gop: Return EFI_SUCCESS if a usable GOP was found
efi/gop: Return EFI_NOT_FOUND if there are no usable GOPs
efi/memreserve: Register reservations as 'reserved' in /proc/iomem
commit d23f3839fe ("ARM: dts: DRA7: Add pcie1 dt node for
EP mode") while adding the dt node for EP mode for DRA7 platform,
added rc node for am571x-idk and populated gpios property with
"gpio3 23". However the GPIO_PCIE_SWRST line is actually connected
to "gpio5 18". Fix it here. (The patch adding "gpio3 23" was tested
with another am57x board in EP mode which doesn't rely on reset from
host).
Cc: stable <stable@vger.kernel.org> # 4.14+
Fixes: d23f3839fe ("ARM: dts: DRA7: Add pcie1 dt node for EP mode")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
PERST# line in the PCIE connector is driven by the host mode and not
EP mode. The gpios property here is used for driving the PERST# line.
Remove gpios property from all endpoint device tree nodes.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Recently, there's been some compat ioctl cleanup, in which large
hardcoded lists were replaced with compat_ptr_ioctl. One of these
changes involved removing the random.c hardcoded list entries and adding
a compat ioctl function pointer to the random.c fops. In the process,
urandom was forgotten about, so this commit fixes that oversight.
Fixes: 507e4e2b43 ("compat_ioctl: remove /dev/random commands")
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20191217172455.186395-1-Jason@zx2c4.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IPU1 MMU has been using common IOMMU pdata quirks defined and
used by all IPU IOMMU devices on OMAP4 and beyond. Separate out the
pdata for IPU1 MMU with the additional .set_pwrdm_constraint ops
plugged in, so that the IPU1 power domain can be restricted to ON
state during the boot and active period of the IPU1 remote processor.
This eliminates the pre-conditions for the IPU1 boot issue as
described in commit afe518400bdb ("iommu/omap: fix boot issue on
remoteprocs with AMMU/Unicache").
NOTE:
1. RET is not a valid target power domain state on DRA7 platforms,
and IPU power domain is normally programmed for OFF. The IPU1
still fails to boot though, and an unclearable l3_noc error is
thrown currently on 4.14 kernel without this fix. This behavior
is slightly different from previous 4.9 LTS kernel.
2. The fix is currently applied only to IPU1 on DRA7xx SoC, as the
other affected processors on OMAP4/OMAP5/DRA7 are in domains
that are not entering RET. IPU2 on DRA7 is in CORE power domain
which is only programmed for ON power state. The fix can be easily
scaled if these domains do hit RET in the future.
3. The issue was not seen on current DRA7 platforms if any of the
DSP remote processors were booted and using one of the GPTimers
5, 6, 7 or 8 on previous 4.9 LTS kernel. This was due to the
errata fix for i874 implemented in commit 1cbabcb980 ("ARM:
DRA7: clockdomain: Implement timer workaround for errata i874")
which keeps the IPU1 power domain from entering RET when the
timers are active. But the timer workaround did not make any
difference on 4.14 kernel, and an l3_noc error was seen still
without this fix.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Convert omap2 iommu platform code to use ti-sysc instead of legacy
omap-device / hwmod interfaces.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Errata Title:
i879: DSP MStandby requires CD_EMU in SW_WKUP
Description:
The DSP requires the internal emulation clock to be actively toggling
in order to successfully enter a low power mode via execution of the
IDLE instruction and PRCM MStandby/Idle handshake. This assumes that
other prerequisites and software sequence are followed.
Workaround:
The emulation clock to the DSP is free-running anytime CCS is connected
via JTAG debugger to the DSP subsystem or when the CD_EMU clock domain
is set in SW_WKUP mode. The CD_EMU domain can be set in SW_WKUP mode
via the CM_EMU_CLKSTCTRL [1:0]CLKTRCTRL field.
Implementation:
This patch implements this workaround by denying the HW_AUTO mode
for the EMU clockdomain during the power-up of any DSP processor
and re-enabling the HW_AUTO mode during the shutdown of the last
DSP processor (actually done during the enabling and disabling of
the respective DSP MDMA MMUs). Reference counting has to be used to
manage the independent sequencing between the multiple DSP processors.
This switching is done at runtime rather than a static clockdomain
flags value to meet the target power domain state for the EMU power
domain during suspend.
Note that the DSP MStandby behavior is not consistent across all
boards prior to this fix. Please see commit 45f871eec6c0 ("ARM:
OMAP2+: Extend DRA7 IPU1 MMU pdata quirks to DSP MDMA MMUs") for
details.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
IOMMU driver will be using ti-sysc bus driver for power management control
going forward, and the pdata quirks are not needed for anything anymore.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The parent clockdomain for reset must be in force wakeup mode, otherwise
the reset may never complete. Add pdata quirks for this purpose for PRM
driver.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
drm-next-5.6-2019-12-11:
amdgpu:
- Add MST atomic routines
- Add support for DMCUB (new helper microengine for displays)
- Add OEM i2c support in DC
- Use vstartup for vblank events on DCN
- Simplify Kconfig for DC
- Renoir fixes for DC
- Clean up function pointers in DC
- Initial support for HDCP 2.x
- Misc code cleanups
- GFX10 fixes
- Rework JPEG engine handling for VCN
- Add clock and power gating support for JPEG
- BACO support for Arcturus
- Cleanup PSP ring handling
- Add framework for using BACO with runtime pm to save power
- Move core pci state handling out of the driver for pm ops
- Allow guest power control in 1 VF case with SR-IOV
- SR-IOV fixes
- RAS fixes
- Support for power metrics on renoir
- Golden settings updates for gfx10
- Enable gfxoff on supported navi10 skus
- Update MAINTAINERS
amdkfd:
- Clean up generational gfx code
- Fixes for gfx10
- DIQ fixes
- Share more code with amdgpu
radeon:
- PPC DMA fix
- Register checker fixes for r1xx/r2xx
- Misc cleanups
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211223020.7510-1-alexander.deucher@amd.com
IOMMUs are now supported via ti-sysc, so the legacy hwmod data can be
removed.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
