This reverts commit f25c7a006c ("drm/fbdev: Fallback to non tiled mode
if all tiles not present"). The commit causes flip done timeouts in CI.
Below are the sample errors thrown in logs:
[IGT] core_getversion: executing
[IGT] core_getversion: exiting, ret=0
Setting dangerous option reset - tainting kernel
drm:drm_atomic_helper_wait_for_dependencies] ERROR [CRTC:152:pipe B] flip_done timed out
drm:drm_atomic_helper_wait_for_dependencies] ERROR [CONNECTOR:299:DP-2] flip_done timed out
drm:drm_atomic_helper_wait_for_dependencies] ERROR [PLANE:92:plane 1B] flip_done timed out
[drm:drm_atomic_helper_wait_for_flip_done] ERROR [CRTC:152:pipe B] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] ERROR [CRTC:152:pipe B] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] ERROR [CONNECTOR:299:DP-2] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] ERROR [PLANE:92:plane 1B] flip_done timed out
[drm:drm_atomic_helper_wait_for_flip_done] ERROR [CRTC:152:pipe B] flip_done timed out
Console: switching to colour frame buffer device 480x135
[drm:drm_atomic_helper_wait_for_dependencies] ERROR [CRTC:152:pipe B] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] ERROR [CONNECTOR:299:DP-2] flip_done timed out
Reverting the change for now to unblock CI execution.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Fixes: f25c7a006c ("drm/fbdev: Fallback to non tiled mode if all tiles not present")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/6
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191123091840.32382-1-uma.shankar@intel.com
There is no suffix applied to Intel Jasper Lake SOC. Remove it
from the comments and definitions. Besides that, it's a SOC,
thus replace PCH with SOC where it appropriate.
Fixes: e0c61c0479 ("i2c: i801: Add support for Intel Jasper Lake")
Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Fix a typo in the free slave id search loop. Instead of I2C_CLIENT_PEC,
it should have been I2C_CLIENT_TEN. The slave id 1 can only handle 7-bit
addresses and thus is not eligible in case of 10-bit addresses.
As a matter of fact none of the slave id support I2C_CLIENT_PEC, overall
check is performed at the beginning of the stm32f7_i2c_reg_slave function.
Fixes: 60d609f30d ("i2c: i2c-stm32f7: Add slave support")
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Laptops like ASUS UX431FLC and UX431FL can share the same audio quirks.
But UX431FLC needs one more step to enable the internal speaker: Pull
the GPIO from CODEC to initialize the AMP.
Fixes: 60083f9e94 ("ALSA: hda/realtek - Enable internal speaker & headset mic of ASUS UX431FL")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191125093405.5702-1-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The major drawback of commit 7e34f4e4aa ("drm/i915/gen8+: Add RC6 CTX
corruption WA") is that it disables RC6 while Skylake (and friends) is
active, and we do not consider the GPU idle until all outstanding
requests have been retired and the engine switched over to the kernel
context. If userspace is idle, this task falls onto our background idle
worker, which only runs roughly once a second, meaning that userspace has
to have been idle for a couple of seconds before we enable RC6 again.
Naturally, this causes us to consume considerably more energy than
before as powersaving is effectively disabled while a display server
(here's looking at you Xorg) is running.
As execlists will get a completion event as each context is completed,
we can use this interrupt to queue a retire worker bound to this engine
to cleanup idle timelines. We will then immediately notice the idle
engine (without userspace intervention or the aid of the background
retire worker) and start parking the GPU. Thus during light workloads,
we will do much more work to idle the GPU faster... Hopefully with
commensurate power saving!
v2: Watch context completions and only look at those local to the engine
when retiring to reduce the amount of excess work we perform.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112315
References: 7e34f4e4aa ("drm/i915/gen8+: Add RC6 CTX corruption WA")
References: 2248a28384 ("drm/i915/gen8+: Add RC6 CTX corruption WA")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125105858.1718307-3-chris@chris-wilson.co.uk
(cherry picked from commit 4f88f8747f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
In the next patch, we will introduce a new asynchronous retirement
worker, fed by execlists CS events. Here we may queue a retirement as
soon as a request is submitted to HW (and completes instantly), and we
also want to process that retirement as early as possible and cannot
afford to postpone (as there may not be another opportunity to retire it
for a few seconds). To allow the new async retirer to run in parallel
with our submission, pull the __i915_request_queue (that passes the
request to HW) inside the timelines spinlock so that the retirement
cannot release the timeline before we have completed the submission.
v2: Actually to play nicely with engine_retire, we have to raise the
timeline.active_lock before releasing the HW. intel_gt_retire_requsts()
is still serialised by the outer lock so they cannot see this
intermediate state, and engine_retire is serialised by HW submission.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125105858.1718307-2-chris@chris-wilson.co.uk
(cherry picked from commit 88a4655e75)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
I rushed a last minute correction to cancel_port_requests() to prevent
the snooping of *execlists->active as the inflight array was being
updated, without noticing we iterated the inflight array starting from
active! Oops.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112387
Fixes: 97f9af78f3 ("drm/i915/gt: Mark the execlists->active as the primary volatile access")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125112520.1760492-1-chris@chris-wilson.co.uk
(cherry picked from commit da0ef77e1e)
[Joonas: Fixed Fixes: tag to match drm-intel-next-fixes]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Since we want to do a lockless read of the current active request, and
that request is written to by process_csb also without serialisation, we
need to instruct gcc to take care in reading the pointer itself.
Otherwise, we have observed execlists_active() to report 0x40.
[ 2400.760381] igt/para-4098 1..s. 2376479300us : process_csb: rcs0 cs-irq head=3, tail=4
[ 2400.760826] igt/para-4098 1..s. 2376479303us : process_csb: rcs0 csb[4]: status=0x00000001:0x00000000
[ 2400.761271] igt/para-4098 1..s. 2376479306us : trace_ports: rcs0: promote { b9c59:2622, b9c55:2624 }
[ 2400.761726] igt/para-4097 0d... 2376479311us : __i915_schedule: rcs0: -2147483648->3, inflight:0000000000000040, rq:ffff888208c1e940
which is impossible!
The answer is that as we keep the existing execlists->active pointing
into the array as we copy over that array, the unserialised read may see
a partial pointer value.
Fixes: df40306902 ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125094318.1630806-1-chris@chris-wilson.co.uk
(cherry picked from commit 331bf90591)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Currently, when cq event occurred, we first call our own callback
functions in the event process function, then call ib callback
functions. Actually, we can directly call ib callback functions.
Link: https://lore.kernel.org/r/1574044493-46984-5-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Current names of functions are not proper, such as hns_roce_free_cq,
actually it means free cqc, thus we rename them. Furthermore, functions
used inside one file can be named without the prefix hns_roce_ which will
make the functions for verbs symbols more eye-catching.
Link: https://lore.kernel.org/r/1574044493-46984-4-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to package buf and mtt into hns_roce_cq_buf, which will
make code more complex, just delete this struct and move buf and mtt into
hns_roce_cq. Furthermore, we add size member for hns_roce_buf to avoid
repeatly calculating where needed it.
Link: https://lore.kernel.org/r/1574044493-46984-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Some interfaces defined with unnecessary input parameters, such as "nent"
and "vector". This patch redefined these interfaces to make the code more
readable and simple.
Link: https://lore.kernel.org/r/1574044493-46984-2-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Query the device attributes for RDMA operations, including maximum
transfer size and maximum number of SGEs per RDMA WR, and report them
back to the userspace library.
Link: https://lore.kernel.org/r/20191121141509.59297-4-galpress@amazon.com
Signed-off-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Enable remote read access for memory regions in order to support RDMA
operations.
Link: https://lore.kernel.org/r/20191121141509.59297-3-galpress@amazon.com
Signed-off-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There's no reason to separate the network attributes from all other
device attributes. Embed the fields inside the device attributes and
query them all in one function.
Link: https://lore.kernel.org/r/20191121141509.59297-2-galpress@amazon.com
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The variable ret is being initialized with a value that is never
read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Link: https://lore.kernel.org/r/20191122154814.87257-1-colin.king@canonical.com
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Due to recent advances in the firmware for Broadcom's gen p5 series of
adaptors the driver code to report hardware counters has been broken
w.r.t. roce devices.
The new firmware command expects dma length to be specified during stat
dma buffer allocation.
Fixes: 2792b5b95e ("bnxt_en: Update firmware interface spec. to 1.10.0.89.")
Link: https://lore.kernel.org/r/1574317343-23300-3-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the first version of Gen P5 ASIC, chip-id was always set to 0x1750 for
all adaptor port configurations. This has been fixed in the new chip rev.
Due to this missing fix users are not able to use adaptors based on latest
chip rev of Broadcom's Gen P5 adaptors.
Fixes: ae8637e131 ("RDMA/bnxt_re: Add chip context to identify 57500 series")
Link: https://lore.kernel.org/r/1574317343-23300-2-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Luke Starrett <luke.starrett@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adjust indentation from spaces to tab (+optional two spaces) as in coding
style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Link: https://lore.kernel.org/r/20191120134138.15245-1-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Danit Goldberg says:
====================
This series extends RTNETLINK to provide IB port and node GUIDs, which
were configured for Infiniband VFs.
The functionality to set VF GUIDs already existed for a long time, and
here we are adding the missing "get" so that netlink will be symmetric and
various cloud orchestration tools will be able to manage such VFs more
naturally.
The iproute2 was extended too to present those GUIDs.
- ip link show <device>
For example:
- ip link set ib4 vf 0 node_guid 22:44:33:00:33:11:00:33
- ip link set ib4 vf 0 port_guid 10:21:33:12:00:11:22:10
- ip link show ib4
ib4: <BROADCAST,MULTICAST> mtu 4092 qdisc noop state DOWN mode DEFAULT group default qlen 256
link/infiniband 00:00:0a:2d:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:44:36:8d brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 link/infiniband 00:00:0a:2d:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:44:36:8d brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff,
spoof checking off, NODE_GUID 22:44:33:00:33:11:00:33, PORT_GUID 10:21:33:12:00:11:22:10, link-state disable, trust off, query_rss off
====================
Based on the mlx5-next branch from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for
dependencies
* branch 'ib-guids': (35 commits)
IB/mlx5: Implement callbacks for getting VFs GUID attributes
IB/ipoib: Add ndo operation for getting VFs GUID attributes
IB/core: Add interfaces to get VF node and port GUIDs
net/core: Add support for getting VF GUIDs
net/mlx5: Add new chain for netfilter flow table offload
net/mlx5: Refactor creating fast path prio chains
net/mlx5: Accumulate levels for chains prio namespaces
net/mlx5: Define fdb tc levels per prio
net/mlx5: Rename FDB_* tc related defines to FDB_TC_* defines
net/mlx5: Simplify fdb chain and prio eswitch defines
IB/mlx5: Load profile according to RoCE enablement state
IB/mlx5: Rename profile and init methods
net/mlx5: Handle "enable_roce" devlink param
net/mlx5: Document flow_steering_mode devlink param
devlink: Add new "enable_roce" generic device param
net/mlx5: fix spelling mistake "metdata" -> "metadata"
net/mlx5: fix kvfree of uninitialized pointer spec
IB/mlx5: Introduce and use mlx5_core_is_vf()
net/mlx5: E-switch, Enable metadata on own vport
net/mlx5: Refactor ingress acl configuration
...
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
LPSS SPI on Intel Jasper Lake is compatible with Intel Ice Lake which
follows Intel Cannon Lake. Add PCI IDs of Jasper Lake.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20191125125159.15404-1-jarkko.nikula@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In commit a79ca656b6 ("drm/i915: Push the wakeref->count deferral to
the backend"), I erroneously concluded that we last modify the engine
inside __i915_request_commit() meaning that we could enable concurrent
submission for userspace as we enqueued this request. However, this
falls into a trap with other users of the engine->kernel_context waking
up and submitting their request before the idle-switch is queued, with
the result that the kernel_context is executed out-of-sequence most
likely upsetting the GPU and certainly ourselves when we try to retire
the out-of-sequence requests.
As such we need to hold onto the effective engine->kernel_context mutex
lock (via the engine pm mutex proxy) until we have finish queuing the
request to the engine.
v2: Serialise against concurrent intel_gt_retire_requests()
v3: Describe the hairy locking scheme with intel_gt_retire_requests()
for future reference.
v4: Combine timeline->lock and engine pm release; it's hairy.
Fixes: a79ca656b6 ("drm/i915: Push the wakeref->count deferral to the backend")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120165514.3955081-2-chris@chris-wilson.co.uk
(cherry picked from commit 5cba288466)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The general concept was that intel_timeline.active_count was locked by
the intel_timeline.mutex. The exception was for power management, where
the engine->kernel_context->timeline could be manipulated under the
global wakeref.mutex.
This was quite solid, as we always manipulated the timeline only while
we held an engine wakeref.
And then we started retiring requests outside of struct_mutex, only
using the timelines.active_list and the timeline->mutex. There we
started manipulating intel_timeline.active_count outside of an engine
wakeref, and so introduced a race between __engine_park() and
intel_gt_retire_requests(), a race that could result in the
engine->kernel_context not being added to the active timelines and so
losing requests, which caused us to keep the system permanently powered
up [and unloadable].
The race would be easy to close if we could take the engine wakeref for
the timeline before we retire -- except timelines are not bound to any
engine and so we would need to keep all active engines awake. The
alternative is to guard intel_timeline_enter/intel_timeline_exit for use
outside of the timeline->mutex.
Fixes: e5dadff4b0 ("drm/i915: Protect request retirement with timeline->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120165514.3955081-1-chris@chris-wilson.co.uk
(cherry picked from commit a6edbca74b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Previously, we assumed we could use mutex_trylock() within an atomic
context, falling back to a worker if contended. However, such trickery
is illegal inside interrupt context, and so we need to always use a
worker under such circumstances. As we normally are in process context,
we can typically use a plain mutex, and only defer to a work when we
know we are being called from an interrupt path.
Fixes: 51fbd8de87 ("drm/i915/pmu: Atomically acquire the gt_pm wakeref")
References: a0855d24fc ("locking/mutex: Complain upon mutex API misuse in IRQ contexts")
References: https://bugs.freedesktop.org/show_bug.cgi?id=111626
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120125433.3767149-1-chris@chris-wilson.co.uk
(cherry picked from commit 07779a76ee)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When waiting for idle, serialise with any ongoing callback so that it
will have completed before completing the wait.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118230254.2615942-12-chris@chris-wilson.co.uk
(cherry picked from commit f4ba0707c8)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
pm_suspend_target_state is declared under CONFIG_PM_SLEEP but only
defined under CONFIG_SUSPEND. Play safe and only use the symbol if it is
both declared and defined.
Reported-by: kbuild-all@lists.01.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: a70a9e998e ("drm/i915: Defer rc6 shutdown to suspend_late")
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120182209.3967833-1-chris@chris-wilson.co.uk
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Some more development work for v5.5. Highlights include:
- More cleanups from Morimoto-san.
- Trigger word detection for RT5677.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl3bzrQTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0LkMB/4/MkpN4F2WudNCKgmYay2gw3hq8aOR
5Xh/SE6N3BEgBpQiMEUdePRT6LqnQMsSpOaUoKfd4nFvCyLaV7itaYzQuUpo+UJ/
a4UDHJPVfrDJeFghWqSngfEW/N66mpO3UuAvhSRTR3ku0T31v9FkcLsMbdxVUpLC
ablSaFfPCOtTQOsG9blRUL/GAWUhGzPI/Hl4VldS0FvKDmMDY2fxt7QxXRaEYItc
i1Uthklxd0BfRmDqv0WEpduUhbwzg6Uir9pXSisux7DpMk1Li0IyPST5UcRl0Zf4
CKL/qfdQANpufj9kGmrlCOnXB9P5/XYVwfYV430WqMyw0QaOzzSrxT7C
=CZ/+
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: More updates for v5.5
Some more development work for v5.5. Highlights include:
- More cleanups from Morimoto-san.
- Trigger word detection for RT5677.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The major drawback of commit 7e34f4e4aa ("drm/i915/gen8+: Add RC6 CTX
corruption WA") is that it disables RC6 while Skylake (and friends) is
active, and we do not consider the GPU idle until all outstanding
requests have been retired and the engine switched over to the kernel
context. If userspace is idle, this task falls onto our background idle
worker, which only runs roughly once a second, meaning that userspace has
to have been idle for a couple of seconds before we enable RC6 again.
Naturally, this causes us to consume considerably more energy than
before as powersaving is effectively disabled while a display server
(here's looking at you Xorg) is running.
As execlists will get a completion event as each context is completed,
we can use this interrupt to queue a retire worker bound to this engine
to cleanup idle timelines. We will then immediately notice the idle
engine (without userspace intervention or the aid of the background
retire worker) and start parking the GPU. Thus during light workloads,
we will do much more work to idle the GPU faster... Hopefully with
commensurate power saving!
v2: Watch context completions and only look at those local to the engine
when retiring to reduce the amount of excess work we perform.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112315
References: 7e34f4e4aa ("drm/i915/gen8+: Add RC6 CTX corruption WA")
References: 2248a28384 ("drm/i915/gen8+: Add RC6 CTX corruption WA")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125105858.1718307-3-chris@chris-wilson.co.uk
In the next patch, we will introduce a new asynchronous retirement
worker, fed by execlists CS events. Here we may queue a retirement as
soon as a request is submitted to HW (and completes instantly), and we
also want to process that retirement as early as possible and cannot
afford to postpone (as there may not be another opportunity to retire it
for a few seconds). To allow the new async retirer to run in parallel
with our submission, pull the __i915_request_queue (that passes the
request to HW) inside the timelines spinlock so that the retirement
cannot release the timeline before we have completed the submission.
v2: Actually to play nicely with engine_retire, we have to raise the
timeline.active_lock before releasing the HW. intel_gt_retire_requsts()
is still serialised by the outer lock so they cannot see this
intermediate state, and engine_retire is serialised by HW submission.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125105858.1718307-2-chris@chris-wilson.co.uk
As the engine->kernel_context is used within the engine-pm barrier, we
have to be careful when emitting requests outside of the barrier, as the
strict timeline locking rules do not apply. Instead, we must ensure the
engine_park() cannot be entered as we build the request, which is
simplest by taking an explicit engine-pm wakeref around the request
construction.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125105858.1718307-1-chris@chris-wilson.co.uk
I rushed a last minute correction to cancel_port_requests() to prevent
the snooping of *execlists->active as the inflight array was being
updated, without noticing we iterated the inflight array starting from
active! Oops.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112387
Fixes: 331bf90591 ("drm/i915/gt: Mark the execlists->active as the primary volatile access")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125112520.1760492-1-chris@chris-wilson.co.uk
Commit 750e76b4f9 ("drm/i915/gt: Move the [class][inst] lookup for
engines onto the GT") changed the engine query to iterate over uabi
engines but left the buffer size calculation look at the physical engine
count. Difference has no practical consequence but it is nicer to align
both queries.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 750e76b4f9 ("drm/i915/gt: Move the [class][inst] lookup for engines onto the GT")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191122104115.29610-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 9acc99d8f2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The bspec initially provided a single DKL PHY vswing table for both HDMI
and DP, but was recently updated to include an independent table for
HDMI.
Bspec: 49292
Fixes: 978c3e539b ("drm/i915/tgl: Add dkl phy programming sequences")
Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118180219.9309-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 362bfb995b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The bspec was recently updated with new cdclk -> voltage level tables to
accommodate the new 324/326.4 cdclk values.
Bspec: 21809
Fixes: 63c9dae71d ("drm/i915/ehl: Add voltage level requirement table")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118164412.26216-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit d147483884)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first
supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k
uses mac80211 and supports AP, Station and Mesh modes.
Even though ath11k has some similar code as with ath10k (especially
the WMI layer) it was concluded to be simpler to have a "clean start"
for ath11k code base and not try to share the code with ath10k. This
makes maintenance easier and avoids major changes in ath10k, which
would have significantly increased the risk of regressions in existing
setups.
Even though the driver is very similar with ath10k but there are major
differences as well. The datapath is completely different. ath11k
supports multiple MACs, called "soc" in the firmware interface. And
there's only one WMI interface to support.
Currently ath11k supports only IEEE 802.11ac mode, but patches for
802.11ax are available and they will be submitted after ath11k is
accepted to upstream.
The firmware images are available from ath11k-firmware repository but
they will be also submitted to linux-firmware:
https://github.com/kvalo/ath11k-firmware
This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1.
The driver has had multiple authors who are listed in alphabetical
order below.
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org>
Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org>
Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org>
Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org>
Signed-off-by: Miles Hu <milehu@codeaurora.org>
Signed-off-by: Muna Sinada <msinada@codeaurora.org>
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
ath11k is a driver for Qualcomm IEEE 802.11ax devices. Add a
bindings document for the driver, first documenting IPQ8074 which is the
only device ath11k currently supports.
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
There is a check on the retry counter invalid_buf_id_retry that is always
false because invalid_buf_id_retry is initialized to zero on each iteration
of a while-loop. Fix this by initializing the retry counter before the
while-loop starts.
Addresses-Coverity: ("Logically dead code")
Fixes: b4a967b7d0 ("wil6210: reset buff id in status message after completion")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
So far, frames were forwarded regardless of the FCS correctness leading
to userspace applications listening on the monitor mode interface to
receive potentially broken frames, even with the "fcsfail" flag unset.
By default, with the "fcsfail" flag of a monitor mode interface
unset, frames with FCS errors should be dropped. With this patch, the
fcsfail flag is taken into account correctly.
Tested-on: QCA4019 firmware-5-ct-full-community-12.bin-lede.011
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Linus Lüssing <ll@simonwunderlich.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
iw command only show rssi without each chain's rssi on sdio
iw wlan0 station dump
Station a0:40:a0:93:3e:de (on wlan0)
signal: -82 dBm
signal avg: -82 dBm
after this patch, it will show each chain's rssi on sdio
Station a0:40:a0:93:3e:de (on wlan0)
signal: -82 [-84, -88] dBm
signal avg: -82 [-84, -87] dBm
For QCA6174 PCIe, the ppdu have the correct rssi of each chain, it
indicate rssi of rx data by ath10k_htt_rx_h_signal. For sdio chip, the
rssi of each chain stored in rx management reported by firmware, the
ath10k_wmi_tlv_op_pull_mgmt_rx_ev which used for tlv wmi will get the
rssi of each chain and stored them in wmi_mgmt_rx_ev_arg, then indicate
them to mac80211. For non-tlv wmi chip, it will not get the rssi of each
chain and not indicate to mac80211, for non-tlv wmi chip, this patch will
not have impact. For tlv wmi chip, if the rssi of chain in mgmt is valid,
it will be indicate to mac80211, tested with QCA6174 PCIe/SDIO, the rssi
of 2 chain in mgmt is valid.
rssi of chains in mgmt of QCA6174 SDIO:
92096.652780: ath10k:ath10k_log_warn: ath10k_sdio mmc1:0001:1 rssi[0]:70
92096.657324: ath10k:ath10k_log_warn: ath10k_sdio mmc1:0001:1 rssi[1]:68
92096.662009: ath10k:ath10k_log_warn: ath10k_sdio mmc1:0001:1 rssi[2]:128
92096.666647: ath10k:ath10k_log_warn: ath10k_sdio mmc1:0001:1 rssi[3]:128
rssi of chains in mgmt of QCA6174 PCIe:
[ 1581.049816] ath10k_pci 0000:02:00.0: mgmt rssi[0]:17
[ 1581.049818] ath10k_pci 0000:02:00.0: mgmt rssi[1]:22
[ 1581.049821] ath10k_pci 0000:02:00.0: mgmt rssi[2]:128
[ 1581.049823] ath10k_pci 0000:02:00.0: mgmt rssi[3]:128
after apply this patch, the iw's rssi of PCIe do not changed, result is
same with before.
iw wlan0 station dump of QCA6174 PCIe:
Station 6c:e8:73:b8:92:dc (on wlan0)
signal: -70 [-77, -72] dBm
signal avg: -69 [-78, -72] dBm
iw wlan-5000mhz station dump of QCA9984 PCIe
connected with 2 client which has 2 chain:
Station 70:48:0f:1f:1a:b2 (on wlan-5000mhz)
signal: -47 [-55, -48, -87, -88] dBm
signal avg: -42 [-50, -43, -83, -86] dBm
Station ac:c1:ee:39:e3:83 (on wlan-5000mhz)
signal: -43 [-46, -45, -79, -84] dBm
signal avg: -43 [-46, -46, -82, -83] dBm
Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00017-QCARMSWP-1.
Tested with QCA6174 PCIe with firmware WLAN.RM.4.4.1-00110-QCARMSWP-1.
Tested with QCA9984 PCIe with firmware 10.4-3.9.0.2-00040.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
