Unless the address range matters, symbols can be ignored earlier,
which avoids unneeded memory allocation.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When the BDF download QMI message has the end field set to 1, it signals
the end of the transfer, and triggers the firmware to do a CRC check. The
BDFs for msm8998 devices fail this check, yet the firmware is happy to
still use the BDF. It appears that this error is not caught by the
downstream drive by concidence, therefore there are production devices
in the field where this issue needs to be handled otherwise we cannot
support wifi on them. So, attempt to detect this scenario as best we can
and treat it as non-fatal.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The callers of this function expect (unsigned char *). I do not see
a good reason to make this function return (void *).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
You can do equivalent things with strspn(). I do not see noticeable
performance difference.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
sym_entry::sym is (unsigned char *) instead of (char *) because
kallsyms exploits the MSB for compression, and the characters are
used as the index of token_profit array.
However, it requires casting (unsigned char *) to (char *) in some
places since standard library functions such as strcmp(), strlen()
expect (char *).
Introduce a new helper, sym_name(), which advances the given pointer
by 1 and casts it to (char *).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit 6f00df24ee ("[PATCH] Strip local symbols from kallsyms"),
all symbols starting '$' are ignored.
is_arm_mapping_symbol() particularly ignores $a, $t, etc. but it is
redundant.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, record_relative_base() iterates over the entire table to
find the minimum address, but it is not efficient because we sort
the table anyway.
After sort_symbol(), the table is sorted by address. (kallsyms parses
the 'nm -n' output, so the data is already sorted by address, but this
commit does not rely on it.)
Move record_relative_base() after sort_symbols(), and take the first
non-absolute symbol value.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When ath10k_qmi_init() fails, the error handling does not free the irq
resources, which causes an issue if we EPROBE_DEFER as we'll attempt to
(re-)register irqs which are already registered.
Fix this by doing a power off since we just powered on the hardware, and
freeing the irqs as error handling.
Fixes: ba94c753cc ("ath10k: add QMI message handshake for wcn3990 client")
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Currently, build_initial_tok_table() trims unused symbols, but it is
called after sort_symbols().
It is not efficient to sort the huge table that contains unused entries.
Shrink the table before sorting it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
build_initial_tok_table() overwrites unused sym_entry to shrink the
table size. Before the entry is overwritten, table[i].sym must be freed
since it is malloc'ed data.
This fixes the 'definitely lost' report from valgrind. I ran valgrind
against x86_64_defconfig of v5.4-rc8 kernel, and here is the summary:
[Before the fix]
LEAK SUMMARY:
definitely lost: 53,184 bytes in 2,874 blocks
[After the fix]
LEAK SUMMARY:
definitely lost: 0 bytes in 0 blocks
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add NL80211_FEATURE_ND_RANDOM_MAC_ADDR for NLO will enable the random
mac address for netdetect case.
iw command:
iw phy0 wowlan enable net-detect net-detect
randomize=AA:7B:A1:AC:B2:41/FF:FF:FF:FF:FF:FF interval 5000 delay 30
freqs 2412 matches ssid foo.
After suspend, DUT will send probe request with mac AA:7B:A1:AC:B2:41.
WCN3990, QCA9377, QCA6174 PCI also support this feature.
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00029.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Firmware with the build id QC_IMAGE_VERSION_STRING=WLAN.HL.1.0.2-XXXX does
not support the QMI_WLFW_HOST_CAP_REQ_V01 message and will return the
QMI not supported error to the ath10k driver. Since not supporting this
message is not fatal to the firmware nor the ath10k driver, lets catch
this particular scenario and ignore it so that we can still bring up
wifi services successfully.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Download firmware time cost of SDIO is too long, it is about 480ms,
add large size 2048 bytes for BMI download for SDIO chip, its time
cost will reduced to 240ms.
This will optimize the download firmware time cost.
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00017-QCARMSWP-1.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
the tlv len is set to the total len of the wmi cmd, it will trigger
firmware crash, correct the tlv len.
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00017-QCARMSWP-1 and QCA6174
PCIE with firmware WLAN.RM.4.4.1-00110-QCARMSWPZ-1.
Fixes: ce834e280f ("ath10k: support NET_DETECT WoWLAN feature")
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
For RX, it has two parts, one is to read data from sdio, another
is to indicate the packets to upper stack. Recently it has only
one thread to do all RX things, it results that it is sequential
for RX and low throughout, change RX to parallel for the two parts
will increase throughout.
This patch move the indication to a workqueue, it results in
significant performance improvement on RX path.
Udp rx throughout is 200Mbps without this patch, and it arrives
400Mbps with this patch.
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00017-QCARMSWPZ-1
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The max bundle size support by firmware is 32, change it from 8 to 32
will help performance. This results in significant performance
improvement on RX path.
The real max rx bundle is decided in ath10k_htc_wait_target(),
it is the min value of HTC_HOST_MAX_MSG_PER_RX_BUNDLE and the value reported
from firmware. So this change shouldn't cause any regressions with other
hardware supported by ath10k.
Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00017-QCARMSWPZ-1.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The existing implementation of initiating multiple sdio transfers for
receive bundling is slowing down the receive speed. Combining the
transfers using a bundle method would be ideal.
The transmission utilization ratio for sdio bus for small packet is
slow, because the space and time cost for sdio bus is same for large
length packet and small length packet. So the speed of data for large
length packet is higher than small length.
Test result of different length of data:
data packet(byte) cost time(us) calculated rate(Mbps)
256 28 73
512 33 124
1024 35 234
1792 45 318
14336 168 682
28672 333 688
57344 660 695
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00017-QCARMSWPZ-1
Signed-off-by: Alagu Sankar <alagusankar@silex-india.com>
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The AML code implementing the WMI methods creates a variable length
field to hold the input data we pass like this:
CreateDWordField (Arg1, 0x0C, DSZI)
Local5 = DSZI /* \HWMC.DSZI */
CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN)
If we pass 0 as bios_args.datasize argument then (Local5 * 0x08)
is 0 which results in these errors:
[ 71.973305] ACPI BIOS Error (bug): Attempt to CreateField of length zero (20190816/dsopcode-133)
[ 71.973332] ACPI Error: Aborting method \HWMC due to previous error (AE_AML_OPERAND_VALUE) (20190816/psparse-529)
[ 71.973413] ACPI Error: Aborting method \_SB.WMID.WMAA due to previous error (AE_AML_OPERAND_VALUE) (20190816/psparse-529)
And in our HPWMI_WIRELESS2_QUERY calls always failing. for read commands
like HPWMI_WIRELESS2_QUERY the DSZI value is not used / checked, except for
read commands where extra input is needed to specify exactly what to read.
So for HPWMI_WIRELESS2_QUERY we can safely pass the size of the expected
output as insize to hp_wmi_perform_query(), as we are already doing for all
other HPWMI_READ commands we send. Doing so fixes these errors.
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197007
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201981
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The HP WMI calls may take up to 128 bytes of data as input, and
the AML methods implementing the WMI calls, declare a couple of fields for
accessing input in different sizes, specifycally the HWMC method contains:
CreateField (Arg1, 0x80, 0x0400, D128)
Even though we do not use any of the WMI command-types which need a buffer
of this size, the APCI interpreter still tries to create it as it is
declared in generoc code at the top of the HWMC method which runs before
the code looks at which command-type is requested.
This results in many of these errors on many different HP laptop models:
[ 14.459261] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20170303/dsopcode-236)
[ 14.459268] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff8edcc61507f8), AE_AML_BUFFER_LIMIT (20170303/psparse-543)
[ 14.459279] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff8edcc61523c0), AE_AML_BUFFER_LIMIT (20170303/psparse-543)
This commit increases the size of the data element of the bios_args struct
to 128 bytes fixing these errors.
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197007
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201981
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
LLVM revision r374662 gives LLVM the ability to convert certain loops
into a reference to bcmp as an optimization; this breaks
prom_init_check.sh:
CALL arch/powerpc/kernel/prom_init_check.sh
Error: External symbol 'bcmp' referenced from prom_init.c
make[2]: *** [arch/powerpc/kernel/Makefile:196: prom_init_check] Error 1
bcmp is defined in lib/string.c as a wrapper for memcmp so this could
be added to the whitelist. However, commit
450e7dd400 ("powerpc/prom_init: don't use string functions from
lib/") copied memcmp as prom_memcmp to avoid KASAN instrumentation so
having bcmp be resolved to regular memcmp would break that assumption.
Furthermore, because the compiler is the one that inserted bcmp, we
cannot provide something like prom_bcmp.
To prevent LLVM from being clever with optimizations like this, use
-ffreestanding to tell LLVM we are not hosted so it is not free to
make transformations like this.
Reviewed-by: Nick Desaulneris <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191119045712.39633-4-natechancellor@gmail.com
Commit aea447141c ("powerpc: Disable -Wbuiltin-requires-header when
setjmp is used") disabled -Wbuiltin-requires-header because of a
warning about the setjmp and longjmp declarations.
r367387 in clang added another diagnostic around this, complaining
that there is no jmp_buf declaration.
In file included from ../arch/powerpc/xmon/xmon.c:47:
../arch/powerpc/include/asm/setjmp.h:10:13: error: declaration of
built-in function 'setjmp' requires the declaration of the 'jmp_buf'
type, commonly provided in the header <setjmp.h>.
[-Werror,-Wincomplete-setjmp-declaration]
extern long setjmp(long *);
^
../arch/powerpc/include/asm/setjmp.h:11:13: error: declaration of
built-in function 'longjmp' requires the declaration of the 'jmp_buf'
type, commonly provided in the header <setjmp.h>.
[-Werror,-Wincomplete-setjmp-declaration]
extern void longjmp(long *, long);
^
2 errors generated.
We are not using the standard library's longjmp/setjmp implementations
for obvious reasons; make this clear to clang by using -ffreestanding
on these files.
Cc: stable@vger.kernel.org # 4.14+
Suggested-by: Segher Boessenkool <segher@kernel.crashing.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191119045712.39633-3-natechancellor@gmail.com
When building pseries_defconfig, building vdso32 errors out:
error: unknown target ABI 'elfv1'
This happens because -m32 in clang changes the target to 32-bit,
which does not allow the ABI to be changed.
Commit 4dc831aa88 ("powerpc: Fix compiling a BE kernel with a
powerpc64le toolchain") added these flags to fix building big endian
kernels with a little endian GCC.
Clang doesn't need -mabi because the target triple controls the
default value. -mlittle-endian and -mbig-endian manipulate the triple
into either powerpc64-* or powerpc64le-*, which properly sets the
default ABI.
Adding a debug print out in the PPC64TargetInfo constructor after line
383 above shows this:
$ echo | ./clang -E --target=powerpc64-linux -mbig-endian -o /dev/null -
Default ABI: elfv1
$ echo | ./clang -E --target=powerpc64-linux -mlittle-endian -o /dev/null -
Default ABI: elfv2
$ echo | ./clang -E --target=powerpc64le-linux -mbig-endian -o /dev/null -
Default ABI: elfv1
$ echo | ./clang -E --target=powerpc64le-linux -mlittle-endian -o /dev/null -
Default ABI: elfv2
Don't specify -mabi when building with clang to avoid the build error
with -m32 and not change any code generation.
-mcall-aixdesc is not an implemented flag in clang so it can be safely
excluded as well, see commit 238abecde8 ("powerpc: Don't use gcc
specific options on clang").
pseries_defconfig successfully builds after this patch and
powernv_defconfig and ppc44x_defconfig don't regress.
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
[mpe: Trim clang links in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191119045712.39633-2-natechancellor@gmail.com
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1574306461-7646-1-git-send-email-krzk@kernel.org
For a read-only mapping, ask for a set of features that make the image
only unwritable rather than both unreadable and unwritable by a client
that doesn't understand them. As of today, the difference between them
for krbd is journaling (JOURNALING) and live migration (MIGRATING).
get_features method supports read_only parameter since hammer, ceph.git
commit 6176ec5fde2a ("librbd: differentiate between R/O vs R/W RBD
features").
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Since infernalis, ceph.git commit 281f87f9ee52 ("cls_rbd: get_features
on snapshots returns HEAD image features"), querying and checking that
is pointless. Userspace support for manipulating image features after
image creation came also in infernalis, so a snapshot with a different
set of features wasn't ever possible.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
RBD_DEV_FLAG_EXISTS check in rbd_queue_workfn() is racy and leads to
inconsistent behaviour. If the object (or its snapshot) isn't there,
the OSD returns ENOENT. A read submitted before the snapshot removal
notification is processed would be zero-filled and ended with status
OK, while future reads would be failed with IOERR. It also doesn't
handle a case when an image that is mapped read-only is removed.
On top of this, because watch is no longer established for read-only
mappings, we no longer get notifications, so rbd_exists_validate() is
effectively dead code. While failing requests rather than returning
zeros is a good thing, RBD_DEV_FLAG_EXISTS is not it.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
With exclusive lock out of the way, watch is the only thing left that
prevents a read-only mapping from being used with read-only OSD caps.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
A read-only mapping should be usable with read-only OSD caps, so
neither the header lock nor the object map lock can be acquired.
Unfortunately, this means that images mapped read-only lose the
advantage of the object map.
Snapshots, however, can take advantage of the object map without
any exclusionary locks, so if the object map is desired, snapshot
the image and map the snapshot instead of the image.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
If an image is mapped read-only, don't allow setting its partition(s)
to read-write via BLKROSET: with the previous patch all writes to such
images are failed anyway.
If an image is mapped read-write, its partition(s) can be set to
read-only (and back to read-write) as before. Note that at the rbd
level the image will remain writeable: anything sent down by the block
layer will be executed, including any write from internal kernel users.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Even though -o ro/-o read_only/--read-only options are very old, we
have never really treated them seriously (on par with snapshots). As
a first step, fail writes to images mapped read-only just like we do
for snapshots.
We need this check in rbd because the block layer basically ignores
read-only setting, see commit a32e236eb9 ("Partially revert "block:
fail op_is_write() requests to read-only partitions"").
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
rbd_dev->opts is not available for parent images, making checking
rbd_dev->opts->read_only in various places (rbd_dev_image_probe(),
need_exclusive_lock(), use_object_map() in the following patches)
harder than it needs to be.
Keeping rbd_dev_image_probe() in mind, move the initialization in
do_rbd_add() up. snap_id isn't filled in at that point, so replace
rbd_is_snap() with a snap_name comparison.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
We currently just pass junk in this field unless we're retransmitting a
create, but in later patches, we'll need a mechanism to pass a delegated
inode number on an initial create request. Prepare for this by ensuring
this field is zeroed out.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When this occurs, it usually means that we raced with a rename, and
there is no need to warn in that case. Only printk if we pass the
rename sequence check but still ended up with pos < 0.
Either way, this doesn't warrant a KERN_ERR message. Change it to
KERN_WARNING.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Alex has got plenty on his plate aside from rbd and hasn't really been
active in recent years. Remove his maintainership entry.
Dongsheng is very familiar with the code base and has been reviewing rbd
patches for a while now. Add him as a reviewer.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Alex Elder <elder@kernel.org>
Acked-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
For example, if we have 5 mds in the mdsmap and the states are:
m_info[5] --> [-1, 1, -1, 1, 1]
If we get a random number 1, then we should get the mds index 3 as
expected, but actually we will get index 2, which the state is -1.
The issue is that the for loop increment will advance past any "up"
MDS that was found during the while loop search.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
There is a spelling mistake in a debug message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
None of these helper functions change anything in memory, so we can
declare their arguments as const.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
- Two fixes from Greg Kurz to fix memory leak bugs in the XIVE code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEv0VLfXa2m9eKuaRpnZrqdyxjcZ8FAl3bJKwACgkQnZrqdyxj
cZ92xQgAhgnARWJwh+uazayNrwB12TJA7G25RO8CUEwWaAY/io5QeO7nQCmNZ3cf
TflQpI1dL5qFpzU7uNunHqdqyhlaD0wwkHfrN71molr5sA1uRlIyxwwkE6coZQEC
n/LiGayoxqt2Ra06H4L4SGSjb7fcCl8eYjC3xjTx9Zdf/iXVcwYprBch5kcrToLV
s0NvRvDgwcaqsxQyybTO0wRvME/qz9JFtNUgl6H4PNSt3l/yv+rM+BgjyNR3tyKu
B1G4937GqBIAV4jYmK0a/LDnNfxs9EmOjuJLKCHmVxlfbsg8wasNk3kj+mdrh2O3
ZjCdh782GyGwp/ysddOHmIhXFyQMhQ==
=9kV2
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-next-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
Second KVM PPC update for 5.5
- Two fixes from Greg Kurz to fix memory leak bugs in the XIVE code.
The gma500 driver stores the console framebuffer in struct psb_fbdev.
Moving it into struct drm_fb_helper will allow for removal of struct
psb_fbdev.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191122100545.16812-6-tzimmermann@suse.de
