[ Upstream commit 8becf9179a ]
Clear the PCS_TX_SWING_FULL field mask before setting the new value
in PHY_CTRL5 register. Without clearing the mask first, the OR operation
could leave previously set bits, resulting in incorrect register
configuration.
Fixes: 63c85ad0cd ("phy: fsl-imx8mp-usb: add support for phy tuning")
Suggested-by: Leonid Segal <leonids@variscite.com>
Acked-by: Pierluigi Passaro <pierluigi.p@variscite.com>
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://patch.msgid.link/20251219160912.561431-1-stefano.r@variscite.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0732fe787 ]
When device tree lacks optional "xlnx,addrwidth" property, the addr_width
variable remained uninitialized with garbage values, causing incorrect
DMA mask configuration and subsequent probe failure. The fix ensures a
fallback to the default 32-bit address width when this property is missing.
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Fixes: b72db4005f ("dmaengine: vdma: Add 64 bit addressing support to the driver")
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Folker Schwesinger <dev@folker-schwesinger.de>
Link: https://patch.msgid.link/20251021183006.3434495-1-suraj.gupta2@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2efd07a7c3 ]
A use-after-free bug exists in the Tegra ADMA driver when audio streams
are terminated, particularly during XRUN conditions. The issue occurs
when the DMA buffer is freed by tegra_adma_terminate_all() before the
vchan completion tasklet finishes accessing it.
The race condition follows this sequence:
1. DMA transfer completes, triggering an interrupt that schedules the
completion tasklet (tasklet has not executed yet)
2. Audio playback stops, calling tegra_adma_terminate_all() which
frees the DMA buffer memory via kfree()
3. The scheduled tasklet finally executes, calling vchan_complete()
which attempts to access the already-freed memory
Since tasklets can execute at any time after being scheduled, there is
no guarantee that the buffer will remain valid when vchan_complete()
runs.
Fix this by properly synchronizing the virtual channel completion:
- Calling vchan_terminate_vdesc() in tegra_adma_stop() to mark the
descriptors as terminated instead of freeing the descriptor.
- Add the callback tegra_adma_synchronize() that calls
vchan_synchronize() which kills any pending tasklets and frees any
terminated descriptors.
Crash logs:
[ 337.427523] BUG: KASAN: use-after-free in vchan_complete+0x124/0x3b0
[ 337.427544] Read of size 8 at addr ffff000132055428 by task swapper/0/0
[ 337.427562] Call trace:
[ 337.427564] dump_backtrace+0x0/0x320
[ 337.427571] show_stack+0x20/0x30
[ 337.427575] dump_stack_lvl+0x68/0x84
[ 337.427584] print_address_description.constprop.0+0x74/0x2b8
[ 337.427590] kasan_report+0x1f4/0x210
[ 337.427598] __asan_load8+0xa0/0xd0
[ 337.427603] vchan_complete+0x124/0x3b0
[ 337.427609] tasklet_action_common.constprop.0+0x190/0x1d0
[ 337.427617] tasklet_action+0x30/0x40
[ 337.427623] __do_softirq+0x1a0/0x5c4
[ 337.427628] irq_exit+0x110/0x140
[ 337.427633] handle_domain_irq+0xa4/0xe0
[ 337.427640] gic_handle_irq+0x64/0x160
[ 337.427644] call_on_irq_stack+0x20/0x4c
[ 337.427649] do_interrupt_handler+0x7c/0x90
[ 337.427654] el1_interrupt+0x30/0x80
[ 337.427659] el1h_64_irq_handler+0x18/0x30
[ 337.427663] el1h_64_irq+0x7c/0x80
[ 337.427667] cpuidle_enter_state+0xe4/0x540
[ 337.427674] cpuidle_enter+0x54/0x80
[ 337.427679] do_idle+0x2e0/0x380
[ 337.427685] cpu_startup_entry+0x2c/0x70
[ 337.427690] rest_init+0x114/0x130
[ 337.427695] arch_call_rest_init+0x18/0x24
[ 337.427702] start_kernel+0x380/0x3b4
[ 337.427706] __primary_switched+0xc0/0xc8
Fixes: f46b195799 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA")
Signed-off-by: Sheetal <sheetal@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20251110142445.3842036-1-sheetal@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7d436a6c1 ]
The max_register field is assigned the size of the register memory
region instead of the offset of the last register.
The result is that reading from the regmap via debugfs can cause
a segmentation fault:
tail /sys/kernel/debug/regmap/xdma.1.auto/registers
Unable to handle kernel paging request at virtual address ffff800082f70000
Mem abort info:
ESR = 0x0000000096000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x07: level 3 translation fault
[...]
Call trace:
regmap_mmio_read32le+0x10/0x30
_regmap_bus_reg_read+0x74/0xc0
_regmap_read+0x68/0x198
regmap_read+0x54/0x88
regmap_read_debugfs+0x140/0x380
regmap_map_read_file+0x30/0x48
full_proxy_read+0x68/0xc8
vfs_read+0xcc/0x310
ksys_read+0x7c/0x120
__arm64_sys_read+0x24/0x40
invoke_syscall.constprop.0+0x64/0x108
do_el0_svc+0xb0/0xd8
el0_svc+0x38/0x130
el0t_64_sync_handler+0x120/0x138
el0t_64_sync+0x194/0x198
Code: aa1e03e9 d503201f f9400000 8b214000 (b9400000)
---[ end trace 0000000000000000 ]---
note: tail[1217] exited with irqs disabled
note: tail[1217] exited with preempt_count 1
Segmentation fault
Fixes: 17ce252266 ("dmaengine: xilinx: xdma: Add xilinx xdma driver")
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49400b701e ]
The driver's existing logic for setting the DMA mask for "marvell,pdma-1.0"
was flawed. It incorrectly relied on pdev->dev->coherent_dma_mask instead
of declaring the hardware's fixed addressing capability. A cleaner and
more correct approach is to define the mask directly based on the hardware
limitations.
The MMP/PXA PDMA controller is a 32-bit DMA engine. This is supported by
datasheets and various dtsi files for PXA25x, PXA27x, PXA3xx, and MMP2,
all of which are 32-bit systems.
This patch simplifies the driver's logic by replacing the 'u64 dma_mask'
field with a simpler 'u32 dma_width' to store the addressing capability
in bits. The complex if/else block in probe() is then replaced with a
single, clear call to dma_set_mask_and_coherent(). This sets a fixed
32-bit DMA mask for "marvell,pdma-1.0" and a 64-bit mask for
"spacemit,k1-pdma," matching each device's hardware capabilities.
Finally, this change also works around a specific build error encountered
with clang-20 on x86_64 allyesconfig. The shift-count-overflow error is
caused by a known clang compiler issue where the DMA_BIT_MASK(n) macro's
ternary operator is not correctly evaluated in static initializers. By
moving the macro's evaluation into the probe() function, the driver avoids
this compiler bug.
Fixes: 5cfe585d86 ("dmaengine: mmp_pdma: Add SpacemiT K1 PDMA support with 64-bit addressing")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/lkml/CA+G9fYsPcMfW-e_0_TRqu4cnwqOqYF3aJOeKUYk6Z4qRStdFvg@mail.gmail.com
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5811e6297 ]
If the pre-operation file size is read before locking the inode and
quiescing O_DIRECT writes, then nfs_truncate_last_folio() might end up
overwriting valid file data.
Fixes: b1817b18ff ("NFS: Protect against 'eof page pollution'")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e8e590fd6 ]
Add the missing @align and @memmap_on_memory fields to kerneldoc comment
header for struct dev_dax.
Also, some other fields were followed by '-' and others by ':'. Fix all
to be ':' for actual kerneldoc compliance.
Link: https://lkml.kernel.org/r/20260110191804.5739-1-john@groves.net
Fixes: 33cf94d717 ("device-dax: make align a per-device property")
Fixes: 4eca0ef49a ("dax/kmem: allow kmem to add memory with memmap_on_memory")
Signed-off-by: John Groves <john@groves.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f171b55f14 ]
Commit 6faea3422e ("arch, mm: streamline HIGHMEM freeing") overzealously
removed mem_init_free_highmem() function that beside freeing high memory
pages checked for CPU support for high memory as a prerequisite.
Partially restore mem_init_free_highmem() with a new highmem_init() name
and make it discard high memory in case there is no CPU support for it.
Link: https://lkml.kernel.org/r/20251231105701.519711-1-rppt@kernel.org
Fixes: 6faea3422e ("arch, mm: streamline HIGHMEM freeing")
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reported-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Jonas Jelonek <jelonek.jonas@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2fb7836b0 ]
Patch series "mm kernel-doc fixes".
Here are kernel-doc fixes for mm subsystem. I'm also including textsearch
fix since there's currently no maintainer for include/linux/textsearch.h
(get_maintainer.pl only shows LKML).
This patch (of 4):
Sphinx reports kernel-doc warning:
WARNING: ./include/linux/sched/mm.h:332 function parameter 'flags' not described in 'memalloc_flags_save'
Describe @flags to fix it.
Link: https://lkml.kernel.org/r/20251219014006.16328-2-bagasdotme@gmail.com
Link: https://lkml.kernel.org/r/20251219014006.16328-3-bagasdotme@gmail.com
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Fixes: 3f6d5e6a46 ("mm: introduce memalloc_flags_{save,restore}")
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2426a211d ]
The user mode queue keeps a pointer to the most recent fence in
userq->last_fence. This pointer holds an extra dma_fence reference.
When the queue is destroyed, we free the fence driver and its xarray,
but we forgot to drop the last_fence reference.
Because of the missing dma_fence_put(), the last fence object can stay
alive when the driver unloads. This leaves an allocated object in the
amdgpu_userq_fence slab cache and triggers
This is visible during driver unload as:
BUG amdgpu_userq_fence: Objects remaining on __kmem_cache_shutdown()
kmem_cache_destroy amdgpu_userq_fence: Slab cache still has objects
Call Trace:
kmem_cache_destroy
amdgpu_userq_fence_slab_fini
amdgpu_exit
__do_sys_delete_module
Fix this by putting userq->last_fence and clearing the pointer during
amdgpu_userq_fence_driver_free().
This makes sure the fence reference is released and the slab cache is
empty when the module exits.
v2: Update to only release userq->last_fence with dma_fence_put()
(Christian)
Fixes: edc762a51c ("drm/amdgpu/userq: move some code around")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8e051e38a8)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18dbcfb46f ]
Each queue of the process is individually removed and there is not need
to suspend whole mes. Suspending mes stops kernel mode queues also
causing unnecessary timeouts when running mixed work loads
Fixes: 079ae5118e ("drm/amdkfd: fix suspend/resume all calls in mes based eviction path")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4765
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3fd20580b9)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a1253ba50 ]
[Why]
The PSR message was moved in commit 4321742c39 ("drm/amd/display:
Move PSR support message into amdgpu_dm"). This message however shows
for every single link without showing which link is which. This can
send a confusing message to the user.
[How]
Add link name into the message.
Fixes: 4321742c39 ("drm/amd/display: Move PSR support message into amdgpu_dm")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 99f77f6229)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cb6278b44 ]
When driver not support atomic, fb using plane->fb rather than
plane->state->fb.
Fixes: fe151ed7af ("drm/amdgpu: add generic display panic helper code")
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2f2a72de67)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46378ab9fc ]
The word length is the physical width of the channel slots. So the
hw_params would misconfigure when format width and physical width
doesn't match. Like S24_LE which has data width of 24 bits but physical
width of 32 bits. So if using asymmetric formats you will get a lot of
noise.
Fixes: 689c7655b5 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family")
Signed-off-by: Emil Svendsen <emas@bang-olufsen.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20260113-sound-soc-codecs-tvl320adcx140-v4-4-8f7ecec525c8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be7664c81d ]
The "snd_soc_component" in "adcx140_priv" was only used once but never
set. It was only used for reaching "dev" which is already present in
"adcx140_priv".
Fixes: 4e82971f7b ("ASoC: tlv320adcx140: Add a new kcontrol")
Signed-off-by: Emil Svendsen <emas@bang-olufsen.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20260113-sound-soc-codecs-tvl320adcx140-v4-2-8f7ecec525c8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 390caeed08 ]
The CS42L43 codec's load detection can return different impedance values
that map to either HEADPHONE or LINEOUT jack types. However, the
soc_jack_pins array only maps SND_JACK_HEADPHONE to the "Headphone" DAPM
pin, not SND_JACK_LINEOUT.
When headphones are detected with an impedance that maps to LINEOUT
(such as impedance value 0x2), the driver reports SND_JACK_LINEOUT.
Since this doesn't match the jack pin mask, the "Headphone" DAPM pin
is not activated, and no audio is routed to the headphone outputs.
Fix by adding SND_JACK_LINEOUT to the Headphone pin mask, so that both
headphone and line-out detection properly enable the headphone output
path.
This fixes no audio output on devices like the Lenovo ThinkPad P16 Gen 3
where headphones are detected with LINEOUT impedance.
Fixes: d74bad3b74 ("ASoC: intel: sof_sdw_cs42l43: Create separate jacks for hp and mic")
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Cole Leavitt <cole@unwrap.rs>
Link: https://patch.msgid.link/20260114025518.28519-1-cole@unwrap.rs
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d235649558 ]
RSS configuration requires a valid RX indirection table. When the device
reports a single receive queue, rndis_filter_device_add() does not
allocate an indirection table, accepting RSS hash key updates in this
state leads to a hang.
Fix this by gating netvsc_set_rxfh() on ndc->rx_table_sz and return
-EOPNOTSUPP when the table is absent. This aligns set_rxfh with the device
capabilities and prevents incorrect behavior.
Fixes: 962f3fee83 ("netvsc: add ethtool ops to get/set RSS key")
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1768212093-1594-1-git-send-email-gargaditya@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a0243c402 ]
Change the test suite name string to "snd-hda-cirrus-scodec-test".
It was incorrectly named "snd-hda-scodec-cs35l56-test", a leftover
from when the code under test was actually in the cs35l56 driver.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2144833e7b ("ALSA: hda: cirrus_scodec: Add KUnit test")
Link: https://patch.msgid.link/20260113134056.619051-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5e96e54ec ]
Set gpiochip parent to the struct device of the dummy GPIO driver
so that the software node will be associated with the GPIO chip.
The recent commit e5d527be7e ("gpio: swnode: don't use the
swnode's name as the key for GPIO lookup") broke cirrus_scodec_test,
because the software node no longer gets associated with the GPIO
driver by name.
Instead, setting struct gpio_chip.parent to the owning struct device
will find the node using a normal fwnode lookup.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2144833e7b ("ALSA: hda: cirrus_scodec: Add KUnit test")
Link: https://patch.msgid.link/20260113130954.574670-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f93fc5d12d ]
octep_vf_request_irqs() requests MSI-X queue IRQs with dev_id set to
ioq_vector. If request_irq() fails part-way, the rollback loop calls
free_irq() with dev_id set to 'oct', which does not match the original
dev_id and may leave the irqaction registered.
This can keep IRQ handlers alive while ioq_vector is later freed during
unwind/teardown, leading to a use-after-free or crash when an interrupt
fires.
Fix the error path to free IRQs with the same ioq_vector dev_id used
during request_irq().
Fixes: 1cd3b40797 ("octeon_ep_vf: add Tx/Rx processing and interrupt support")
Signed-off-by: Kery Qi <qikeyu2017@gmail.com>
Link: https://patch.msgid.link/20260108164256.1749-2-qikeyu2017@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4026a4462 ]
In __cxl_dpa_reserve(), it will check if the new resource range is
included in one of paritions of the cxl memory device.
cxlds->nr_paritions is used to represent how many partitions information
the cxl memory device has. In the loop, if driver cannot find a
partition including the new resource range, it will be an infinite loop.
[ dj: Removed incorrect fixes tag ]
Fixes: 991d98f17d ("cxl: Make cxl_dpa_alloc() DPA partition number agnostic")
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260112120526.530232-1-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a11224a016 ]
In create_space_info(), the 'space_info' object is allocated at the
beginning of the function. However, there are two error paths where the
function returns an error code without freeing the allocated memory:
1. When create_space_info_sub_group() fails in zoned mode.
2. When btrfs_sysfs_add_space_info_type() fails.
In both cases, 'space_info' has not yet been added to the
fs_info->space_info list, resulting in a memory leak. Fix this by
adding an error handling label to kfree(space_info) before returning.
Fixes: 2be12ef79f ("btrfs: Separate space_info create/update")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5629f8859d ]
Profile rollback can fail in mlx5e_netdev_change_profile() and we will
end up with invalid mlx5e_priv memset to 0, we must maintain the
'destroying' bit in order to gracefully shutdown even if the
profile/priv are not valid.
This patch maintains the previous state of the 'destroying' state of
mlx5e_priv after priv cleanup, to allow the remove flow to cleanup
common resources from mlx5_core to avoid FW fatal errors as seen below:
$ devlink dev eswitch set pci/0000:00:03.0 mode switchdev
Error: mlx5_core: Failed setting eswitch to offloads.
dmesg: mlx5_core 0000:00:03.0 enp0s3np0: failed to rollback to orig profile, ...
$ devlink dev reload pci/0000:00:03.0
mlx5_core 0000:00:03.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
mlx5_core 0000:00:03.0: poll_health:803:(pid 519): Fatal error 3 detected
mlx5_core 0000:00:03.0: firmware version: 28.41.1000
mlx5_core 0000:00:03.0: 0.000 Gb/s available PCIe bandwidth (Unknown x255 link)
mlx5_core 0000:00:03.0: mlx5_function_enable:1200:(pid 519): enable hca failed
mlx5_core 0000:00:03.0: mlx5_function_enable:1200:(pid 519): enable hca failed
mlx5_core 0000:00:03.0: mlx5_health_try_recover:340:(pid 141): handling bad device here
mlx5_core 0000:00:03.0: mlx5_handle_bad_state:285:(pid 141): Expected to see disabled NIC but it is full driver
mlx5_core 0000:00:03.0: mlx5_error_sw_reset:236:(pid 141): start
mlx5_core 0000:00:03.0: NIC IFC still 0 after 4000ms.
Fixes: c4d7eb5768 ("net/mxl5e: Add change profile method")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260108212657.25090-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c39a6a277e ]
If the last test fails, the other side still completes correctly,
which could lead to false positives.
Let's add a final barrier that ensures that the last test has finished
correctly on both sides, but also that the two sides agree on the
number of tests to be performed.
Fixes: 2f65b44e19 ("VSOCK: add full barrier between test cases")
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260108114419.52747-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e67c577d89 ]
Analog to commit db5b4e39c4 ("ip6_gre: make ip6gre_header() robust")
Over the years, syzbot found many ways to crash the kernel
in ipgre_header() [1].
This involves team or bonding drivers ability to dynamically
change their dev->needed_headroom and/or dev->hard_header_len
In this particular crash mld_newpack() allocated an skb
with a too small reserve/headroom, and by the time mld_sendpack()
was called, syzbot managed to attach an ipgre device.
[1]
skbuff: skb_under_panic: text:ffffffff89ea3cb7 len:2030915468 put:2030915372 head:ffff888058b43000 data:ffff887fdfa6e194 tail:0x120 end:0x6c0 dev:team0
kernel BUG at net/core/skbuff.c:213 !
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 1322 Comm: kworker/1:9 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Workqueue: mld mld_ifc_work
RIP: 0010:skb_panic+0x157/0x160 net/core/skbuff.c:213
Call Trace:
<TASK>
skb_under_panic net/core/skbuff.c:223 [inline]
skb_push+0xc3/0xe0 net/core/skbuff.c:2641
ipgre_header+0x67/0x290 net/ipv4/ip_gre.c:897
dev_hard_header include/linux/netdevice.h:3436 [inline]
neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618
NF_HOOK_COND include/linux/netfilter.h:307 [inline]
ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247
NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318
mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855
mld_send_cr net/ipv6/mcast.c:2154 [inline]
mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693
process_one_work kernel/workqueue.c:3257 [inline]
process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421
kthread+0x711/0x8a0 kernel/kthread.c:463
ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
Fixes: c544193214 ("GRE: Refactor GRE tunneling code.")
Reported-by: syzbot+7c134e1c3aa3283790b9@syzkaller.appspotmail.com
Closes: https://www.spinics.net/lists/netdev/msg1147302.html
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260108190214.1667040-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca22c566b8 ]
The auto-generated integrity buffer for writes needs to be fully
initialized before being passed to the underlying block device,
otherwise the uninitialized memory can be read back by userspace or
anyone with physical access to the storage device. If protection
information is generated, that portion of the integrity buffer is
already initialized. The integrity data is also zeroed if PI generation
is disabled via sysfs or the PI tuple size is 0. However, this misses
the case where PI is generated and the PI tuple size is nonzero, but the
metadata size is larger than the PI tuple. In this case, the remainder
("opaque") of the metadata is left uninitialized.
Generalize the BLK_INTEGRITY_CSUM_NONE check to cover any case when the
metadata is larger than just the PI tuple.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: c546d6f438 ("block: only zero non-PI metadata tuples in bio_integrity_prep")
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7470a7a63d ]
Add RCU protection on (struct macvlan_source_entry)->vlan.
Whenever macvlan_hash_del_source() is called, we must clear
entry->vlan pointer before RCU grace period starts.
This allows macvlan_forward_source() to skip over
entries queued for freeing.
Note that macvlan_dev are already RCU protected, as they
are embedded in a standard netdev (netdev_priv(ndev)).
Fixes: 79cf79abce ("macvlan: add source mode")
Reported-by: syzbot+7182fbe91e58602ec1fe@syzkaller.appspotmail.com
https: //lore.kernel.org/netdev/695fb1e8.050a0220.1c677c.039f.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260108133651.1130486-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb74c19fe1 ]
Add missing entries in netdev_lock_type[] and netdev_lock_name[] :
CAN, MCTP, RAWIP, CAIF, IP6GRE, 6LOWPAN, NETLINK, VSOCKMON,
IEEE802154_MONITOR.
Also add a WARN_ONCE() in netdev_lock_pos() to help future bug hunting
next time a protocol is added without updating these arrays.
Fixes: 1a33e10e4a ("net: partially revert dynamic lockdep key changes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260108093244.830280-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab749bfe6a ]
Enable the PA Sync Lost event mask to ensure PA sync loss is properly
reported and handled.
Fixes: 485e0626e5 ("Bluetooth: hci_event: Fix not handling PA Sync Lost event")
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08b096c137 ]
Before accessing the disk_bytenr field of a file extent item we need
to check if we are dealing with an inline extent.
This is because for inline extents their data starts at the offset of
the disk_bytenr field. So accessing the disk_bytenr
means we are accessing inline data or in case the inline data is less
than 8 bytes we can actually cause an invalid
memory access if this inline extent item is the first item in the leaf
or access metadata from other items.
Fixes: 82bfb2e7b6 ("Btrfs: incremental send, fix unnecessary hole writes for sparse files")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e8aaacdad ]
If a switch port has more than one decoder that is using the same
downstream port, the enumeration of the target lists may fail with:
# dmesg | grep target.list
update_decoder_targets: cxl decoder1.0: dport3 found in target list, index 3
update_decoder_targets: cxl decoder1.0: dport2 found in target list, index 2
update_decoder_targets: cxl decoder1.0: dport0 found in target list, index 0
update_decoder_targets: cxl decoder2.0: dport3 found in target list, index 1
update_decoder_targets: cxl decoder4.0: dport3 found in target list, index 1
cxl_mem mem6: failed to find endpoint12:0000:00:01.4 in target list of decoder2.1
cxl_mem mem8: failed to find endpoint13:0000:20:01.4 in target list of decoder4.1
The case, that the same downstream port can be used in multiple target
lists, is allowed and possible.
Fix the update of the target list. Enumerate all children of the
switch port and do not stop the iteration after the first matching
target was found.
With the fix applied:
# dmesg | grep target.list
update_decoder_targets: cxl decoder1.0: dport2 found in target list, index 2
update_decoder_targets: cxl decoder1.0: dport0 found in target list, index 0
update_decoder_targets: cxl decoder1.0: dport3 found in target list, index 3
update_decoder_targets: cxl decoder2.0: dport3 found in target list, index 1
update_decoder_targets: cxl decoder2.1: dport3 found in target list, index 1
update_decoder_targets: cxl decoder4.0: dport3 found in target list, index 1
update_decoder_targets: cxl decoder4.1: dport3 found in target list, index 1
Analyzing the conditions when this happens:
1) A dport is shared by multiple decoders.
2) The decoders have interleaving configured (ways > 1).
The configuration above has the following hierarchy details (fixed
version):
root0
|_
| |
| decoder0.1
| ways: 2
| target_list: 0,1
|_______________________________________
| |
| dport0 | dport1
| |
port2 port4
| |
|___________________ |_____________________
| | | | | |
| decoder2.0 decoder2.1 | decoder4.0 decoder4.1
| ways: 2 ways: 2 | ways: 2 ways: 2
| target_list: 2,3 target_list: 2,3 | target_list: 2,3 target_list: 2,3
|___________________ |___________________
| | | |
| dport2 | dport3 | dport2 | dport3
| | | |
endpoint7 endpoint12 endpoint9 endpoint13
|_ |_ |_ |_
| | | | | | | |
| decoder7.0 | decoder12.0 | decoder9.0 | decoder13.0
| decoder7.2 | decoder12.2 | decoder9.2 | decoder13.2
| | | |
mem3 mem5 mem6 mem8
Note: Device numbers vary for every boot.
Current kernel fails to enumerate endpoint12 and endpoint13 as the
target list is not updated for the second decoder.
Fixes: 4f06d81e7c ("cxl: Defer dport allocation for switch ports")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20260108101324.509667-1-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32b63acd78 ]
Commit efa5630590 ("nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length")
added ttag bounds checking and data_offset
validation in nvmet_tcp_handle_h2c_data_pdu(), but it did not validate
whether the command's data structures (cmd->req.sg and cmd->iov) have
been properly initialized before processing H2C_DATA PDUs.
The nvmet_tcp_build_pdu_iovec() function dereferences these pointers
without NULL checks. This can be triggered by sending H2C_DATA PDU
immediately after the ICREQ/ICRESP handshake, before
sending a CONNECT command or NVMe write command.
Attack vectors that trigger NULL pointer dereferences:
1. H2C_DATA PDU sent before CONNECT → both pointers NULL
2. H2C_DATA PDU for READ command → cmd->req.sg allocated, cmd->iov NULL
3. H2C_DATA PDU for uninitialized command slot → both pointers NULL
The fix validates both cmd->req.sg and cmd->iov before calling
nvmet_tcp_build_pdu_iovec(). Both checks are required because:
- Uninitialized commands: both NULL
- READ commands: cmd->req.sg allocated, cmd->iov NULL
- WRITE commands: both allocated
Fixes: efa5630590 ("nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length")
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Shivam Kumar <kumar.shivam43666@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1979778e9 ]
When es58x_alloc_rx_urbs() fails to allocate the requested number of
URBs but succeeds in allocating some, it returns an error code.
This causes es58x_open() to return early, skipping the cleanup label
'free_urbs', which leads to the anchored URBs being leaked.
As pointed out by maintainer Vincent Mailhol, the driver is designed
to handle partial URB allocation gracefully. Therefore, partial
allocation should not be treated as a fatal error.
Modify es58x_alloc_rx_urbs() to return 0 if at least one URB has been
allocated, restoring the intended behavior and preventing the leak
in es58x_open().
Fixes: 8537257874 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces")
Reported-by: syzbot+e8cb6691a7cf68256cb8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e8cb6691a7cf68256cb8
Signed-off-by: Szymon Wilczek <swilczek.lx@gmail.com>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20251223011732.39361-1-swilczek.lx@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54b603f2db ]
Due to commit 1b600da510 ("PM: EM: Optimize em_cpu_energy() and remove
division"), the logic for energy consumption calculation has been modified.
The actual calculation of cost is 10 * power * max_frequency / frequency
instead of power * max_frequency / frequency.
Therefore, the comment for cost has been updated to reflect the correct
content.
Fixes: 1b600da510 ("PM: EM: Optimize em_cpu_energy() and remove division")
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
[ rjw: Added Fixes: tag ]
Link: https://patch.msgid.link/20251230061534.816894-1-tianyaxiong@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefano Radaelli
Suraj Gupta
Sheetal
Anthony Brandon
Guodong Xu
Trond Myklebust
John Groves
Mike Rapoport (Microsoft)
Bagas Sanjaya
Srinivasan Shanmugam
Harish Kasiviswanathan
Yang Wang
Mario Limonciello (AMD)
Lu Yao
Emil Svendsen
Cole Leavitt
Eric Dumazet
Gal Pressman
Kuniyuki Iwashima
Aditya Garg
Richard Fitzgerald
Lorenzo Bianconi
Jijie Shao
Kery Qi
Li Ming
Jiasheng Jiang
Saeed Mahameed
Stefano Garzarella
Caleb Sander Mateos
Yang Li
Qu Wenruo
Filipe Manana
Robert Richter
Shivam Kumar
Szymon Wilczek
Yaxiong Tian