This patch adds libbpf support for kernel module function call support.
The fd_array parameter is used during BPF program load to pass module
BTFs referenced by the program. insn->off is set to index into this
array, but starts from 1, because insn->off as 0 is reserved for
btf_vmlinux.
We try to use existing insn->off for a module, since the kernel limits
the maximum distinct module BTFs for kfuncs to 256, and also because
index must never exceed the maximum allowed value that can fit in
insn->off (INT16_MAX). In the future, if kernel interprets signed offset
as unsigned for kfunc calls, this limit can be increased to UINT16_MAX.
Also introduce a btf__find_by_name_kind_own helper to start searching
from module BTF's start id when we know that the BTF ID is not present
in vmlinux BTF (in find_ksym_btf_id).
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-7-memxor@gmail.com
This commit moves BTF ID lookup into the newly added registration
helper, in a way that the bbr, cubic, and dctcp implementation set up
their sets in the bpf_tcp_ca kfunc_btf_set list, while the ones not
dependent on modules are looked up from the wrapper function.
This lifts the restriction for them to be compiled as built in objects,
and can be loaded as modules if required. Also modify Makefile.modfinal
to call resolve_btfids for each module.
Note that since kernel kfunc_ids never overlap with module kfunc_ids, we
only match the owner for module btf id sets.
See following commits for background on use of:
CONFIG_X86 ifdef:
569c484f99 (bpf: Limit static tcp-cc functions in the .BTF_ids list to x86)
CONFIG_DYNAMIC_FTRACE ifdef:
7aae231ac9 (bpf: tcp: Limit calling some tcp cc functions to CONFIG_DYNAMIC_FTRACE)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-6-memxor@gmail.com
This commit allows specifying the base BTF for resolving btf id
lists/sets during link time in the resolve_btfids tool. The base BTF is
set to NULL if no path is passed. This allows resolving BTF ids for
module kernel objects.
Also, drop the --no-fail option, as it is only used in case .BTF_ids
section is not present, instead make no-fail the default mode. The long
option name is same as that of pahole.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-5-memxor@gmail.com
This adds helpers for registering btf_id_set from modules and the
bpf_check_mod_kfunc_call callback that can be used to look them up.
With in kernel sets, the way this is supposed to work is, in kernel
callback looks up within the in-kernel kfunc whitelist, and then defers
to the dynamic BTF set lookup if it doesn't find the BTF id. If there is
no in-kernel BTF id set, this callback can be used directly.
Also fix includes for btf.h and bpfptr.h so that they can included in
isolation. This is in preparation for their usage in tcp_bbr, tcp_cubic
and tcp_dctcp modules in the next patch.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-4-memxor@gmail.com
This patch also modifies the BPF verifier to only return error for
invalid kfunc calls specially marked by userspace (with insn->imm == 0,
insn->off == 0) after the verifier has eliminated dead instructions.
This can be handled in the fixup stage, and skip processing during add
and check stages.
If such an invalid call is dropped, the fixup stage will not encounter
insn->imm as 0, otherwise it bails out and returns an error.
This will be exposed as weak ksym support in libbpf in later patches.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-3-memxor@gmail.com
This change adds support on the kernel side to allow for BPF programs to
call kernel module functions. Userspace will prepare an array of module
BTF fds that is passed in during BPF_PROG_LOAD using fd_array parameter.
In the kernel, the module BTFs are placed in the auxilliary struct for
bpf_prog, and loaded as needed.
The verifier then uses insn->off to index into the fd_array. insn->off
0 is reserved for vmlinux BTF (for backwards compat), so userspace must
use an fd_array index > 0 for module kfunc support. kfunc_btf_tab is
sorted based on offset in an array, and each offset corresponds to one
descriptor, with a max limit up to 256 such module BTFs.
We also change existing kfunc_tab to distinguish each element based on
imm, off pair as each such call will now be distinct.
Another change is to check_kfunc_call callback, which now include a
struct module * pointer, this is to be used in later patch such that the
kfunc_id and module pointer are matched for dynamically registered BTF
sets from loadable modules, so that same kfunc_id in two modules doesn't
lead to check_kfunc_call succeeding. For the duration of the
check_kfunc_call, the reference to struct module exists, as it returns
the pointer stored in kfunc_btf_tab.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-2-memxor@gmail.com
Two carveout reserved memory nodes each have been added for each of the
other remote processors devices within the MAIN domain on the TI J721E
SK boards. These nodes are assigned to the respective rproc device nodes
as well. The first region will be used as the DMA pool for the rproc
devices, and the second region will furnish the static carveout regions
for the firmware memory.
An additional reserved memory node is also added to reserve a portion of
the DDR memory to be used for performing inter-processor communication
between all the remote processors running RTOS or baremetal firmwares.
8 MB of memory is reserved for this purpose, and this accounts for all
the vrings and vring buffers between all the possible pairs of remote
processors.
The current carveout addresses and sizes are defined statically for each
rproc device. The R5F processors do not have an MMU, and as such require
the exact memory used by the firmwares to be set-aside. The C71x DSP
processor does support a MMU called CMMU, but is not currently supported
and as such requires the exact memory used by the firmware to be
set-aside. The firmware images do not require any RSC_CARVEOUT entries
in their resource tables to allocate the memory for firmware memory
segments
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210929081333.26454-5-sinthu.raja@ti.com
Add the sub-mailbox nodes that are used to communicate between MPU and
various remote processors present in the J721E SoCs to the J721E EAIK
board. These include the R5F remote processors in the dual-R5F cluster
(MCU_R5FSS0) in the MCU domain and the two dual-R5F clusters
(MAIN_R5FSS0 & MAIN_R5FSS1) in the MAIN domain; the two C66x DSP remote
processors and the single C71x DSP remote processor in the MAIN domain.
These sub-mailbox nodes utilize the System Mailbox clusters 0 through 4.
All the remaining mailbox clusters are currently not used on A72 core,
and are hence disabled.
The sub-mailbox nodes added match the hard-coded mailbox configuration
used within the TI RTOS IPC software packages. The R5F processor
sub-systems are assumed to be running in Split mode, so a sub-mailbox
node is used by each of the R5F cores. Only the sub-mailbox node for
the first R5F core in each cluster is used in case of a Lockstep mode
for that R5F cluster.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210929081333.26454-4-sinthu.raja@ti.com
J721E Starter Kit (SK)[1] is a low cost, small form factor board designed
for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high
performance vision accelerators, video codec accelerators, latest C71x
and C66x DSP, high bandwidth real-time IPs for capture and display, GPU,
dedicated safety island and security accelerators. The SoC is power
optimized to provide best in class performance for industrial and
automotive applications.
J721E SK supports the following interfaces:
* 4 GB LPDDR4 RAM
* x1 Gigabit Ethernet interface
* x1 USB 3.0 Type-C port
* x3 USB 3.0 Type-A ports
* x1 PCIe M.2 E Key
* x1 PCIe M.2 M Key
* 512 Mbit OSPI flash
* x2 CSI2 Camera interface (RPi and TI Camera connector)
* 40-pin Raspberry Pi GPIO header
Add basic support for J721E-SK.
[1] https://www.ti.com/tool/SK-TDA4VM
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210929081333.26454-3-sinthu.raja@ti.com
This adds the devices trees for IOT2050 Product Generation 2 (PG2)
boards. We have Basic and an Advanced variants again, differing in
number of cores, RAM size, availability of eMMC and further details.
The major difference to PG1 is the used silicon revision (SR2.x on
PG2).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/cc868da8264324bde2c87d0c01d4763e3678c706.1632657917.git.jan.kiszka@web.de
The current IOT2050 devices are Product Generation 1 (PG1), using SR1.0
AM65x silicon. Upcoming PG2 devices will use SR2.x SoCs and will
therefore need separate device trees. Prepare for that by factoring out
common bits that will be shared across both generations.
At this chance, drop a link to the product homepage to in the top-level
dts files. Also fix a typo in my email address in some headers.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/31fece05f9728a852c0632985c4fa537cced4ece.1632657917.git.jan.kiszka@web.de
Analogously to the am654-base-board, configure the mailboxes for the two
R5F cores, add them and the already existing memory carve-outs to the
related MCU nodes. Allows to load applications under Linux onto the
cores, e.g. the RTI watchdog firmware.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/1776f8be19b39a938d9248fcfc5332b753783c3e.1632657917.git.jan.kiszka@web.de
The IOT2050 devices described so far are using SR1.0 silicon, thus do
not have the additional PRUs of the ICSSG of the SR2.0. Disable them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/189a91866fb1af02e4fd2345dc56774aa069d5ba.1632657917.git.jan.kiszka@web.de
This ensures that the SD card will remain mmc0 across Basic and Advanced
devices, also avoiding surprises for users coming from the downstream
kernels.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/fe20d6346f119a28e47d129b616682001299cf0e.1632657917.git.jan.kiszka@web.de
Add j7200-evm compatible to the board to allow the board to distinguish
itself from other platforms that may be added in the future.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210925201430.11678-5-nm@ti.com
Add j721e-evm compatible to the board to allow the board to distinguish
itself from other platforms that are pending to be added.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210925201430.11678-4-nm@ti.com
Add compatibles for j721e and j7200 evms to allow for newer platforms
to distinguish themselves.
While doing this, maintain support for older style of description where
the board compatibility was not required.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210925201430.11678-2-nm@ti.com
Make sure that the platforms are grouped together per SoC. This helps
keep the Makefile readable as newer platforms get added to the list.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210915121442.27112-1-nm@ti.com
Add the DT nodes for the ICSSG0 and ICSSG1 processor subsystems that are
present on the K3 AM64x SoCs. The two ICSSGs are identical to each other
for the most part, with some of the peripheral pins from ICSSG1 not pinned
out. Each ICSSG instance is represented by a PRUSS subsystem node and other
child nodes.
The nodes are all added and enabled in the common k3-am64-main.dtsi
file by default. The MDIO nodes need pinctrl lines, and so should be
enabled only on boards where they are actually wired and pinned out
for ICSSG Ethernet. Any new board dts file should disable these if
they are not sure. These are disabled in the existing AM64x board dts
files to begin with.
The ICSSGs on K3 AM64x SoCs are very similar to the versions of the ICSSG
on K3 J721E and AM65x SR2.0 SoCs. The IRAM and BroadSize RAM sizes are all
identical to those on J721E SoCs. All The ICSSG host interrupts intended
towards the main Arm core are also shared with other processors on the SoC,
and can be partitioned as per system integration needs.
The ICSSG subsystem node contains the entire address space. The various
sub-modules of the ICSSG are represented as individual child nodes (so
platform devices themselves) of the PRUSS subsystem node. These include:
- two Programmable Real-Time Units (PRUs)
- two auxiliary PRU cores called RTUs
- two Transmit Programmable Real-Time Units (Tx_PRUs)
- Interrupt controller (INTC)
- a 'memories' node containing all the ICSSG level Data RAMs
- Real Time Media Independent Interface controller (MII_RT)
- Gigabit capable MII_G_RT
- ICSSG CFG sub-module providing two internal clock muxes, with the
default clock parents also assigned using the assigned-clock-parents
property.
The default names for the firmware images for each PRU, RTU and Tx_PRU
cores are defined as follows using the 'firmware-name' property (these
can be adjusted either in derivative board dts files or through sysfs at
runtime if required):
ICSSG0 PRU0 Core : am64x-pru0_0-fw ; PRU1 Core : am64x-pru0_1-fw
ICSSG0 RTU0 Core : am64x-rtu0_0-fw ; RTU1 Core : am64x-rtu0_1-fw
ICSSG0 Tx_PRU0 Core : am64x-txpru0_0-fw ; Tx_PRU1 Core : am64x-txpru0_1-fw
ICSSG1 PRU0 Core : am64x-pru1_0-fw ; PRU1 Core : am64x-pru1_1-fw
ICSSG1 RTU0 Core : am64x-rtu1_0-fw ; RTU1 Core : am64x-rtu1_1-fw
ICSSG1 Tx_PRU0 Core : am64x-txpru1_0-fw ; Tx_PRU1 Core : am64x-txpru1_1-fw
Note:
1. The ICSSG INTC on AM64x SoCs share all the host interrupts with other
processors, so use the 'ti,irqs-reserved' property in derivative board
dts files _if_ any of them should not be handled by the host OS.
2. There are few more sub-modules like the Industrial Ethernet Peripherals
(IEPs), eCAP, PWM, UART that do not have bindings and so will be added
in the future.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210919202935.15604-1-s-anna@ti.com
When the trace_pid_list was created, the default pid max was 32768.
Creating a bitmask that can hold one bit for all 32768 took up 4096 (one
page). Having a one page bitmask was not much of a problem, and that was
used for mapping pids. But today, systems are bigger and can run more
tasks, and now the default pid_max is usually set to 4194304. Which means
to handle that many pids requires 524288 bytes. Worse yet, the pid_max can
be set to 2^30 (1073741824 or 1G) which would take 134217728 (128M) of
memory to store this array.
Since the pid_list array is very sparsely populated, it is a huge waste of
memory to store all possible bits for each pid when most will not be set.
Instead, use a page table scheme to store the array, and allow this to
handle up to 30 bit pids.
The pid_mask will start out with 256 entries for the first 8 MSB bits.
This will cost 1K for 32 bit architectures and 2K for 64 bit. Each of
these will have a 256 array to store the next 8 bits of the pid (another
1 or 2K). These will hold an 2K byte bitmask (which will cover the LSB
14 bits or 16384 pids).
When the trace_pid_list is allocated, it will have the 1/2K upper bits
allocated, and then it will allocate a cache for the next upper chunks and
the lower chunks (default 6 of each). Then when a bit is "set", these
chunks will be pulled from the free list and added to the array. If the
free list gets down to a lever (default 2), it will trigger an irqwork
that will refill the cache back up.
On clearing a bit, if the clear causes the bitmask to be zero, that chunk
will then be placed back into the free cache for later use, keeping the
need to allocate more down to a minimum.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic that implements
the trace_pid_list without affecting the users.
Note, this causes a change in behavior. Every time a pid is written into
the set_*_pid file, it creates a new list and uses RCU to update it. If
pid_max is lowered, but there was a pid currently in the list that was
higher than pid_max, those pids will now be removed on updating the list.
The old behavior kept that from happening.
The rewrite of the pid_list logic will no longer depend on pid_max,
and will return the old behavior.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit 04647773d6 ("dt-bindings: input: Convert ChipOne ICN8318
binding to a schema") converts chipone_icn8318.txt to chipone,icn8318.yaml,
but missed to adjust its reference in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about
a broken reference.
Repair this file reference in CHIPONE ICN8318 I2C TOUCHSCREEN DRIVER.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20211005075451.29691-12-lukas.bulwahn@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Remove two symbols referenced in Kconfig which have been removed
previously by:
ef3c67b645 ("mfd: intel_msic: Remove driver for deprecated platform")
1b79fc4f2b ("x86/apb_timer: Remove driver for deprecated platform")
Detected by scripts/checkkconfigsymbols.py.
[ bp: Merge into a single patch. ]
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210803113531.30720-5-lukas.bulwahn@gmail.com
The "digi_port" pointer can't be NULL and we have already dereferenced
it so checking for NULL is not necessary. Delete the check.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211004103737.GC25015@kili
Rebooting xtensa images loaded with the '-kernel' option in qemu does
not work. When executing a reboot command, the qemu session either hangs
or experiences an endless sequence of error messages.
Kernel panic - not syncing: Unrecoverable error in exception handler
Reset code jumps to the CPU restart address, but Linux can not recover
from there because code and data in the kernel init sections have been
discarded and overwritten at this point.
XTFPGA platforms have a means to reset the CPU by writing 0xdead into a
specific FPGA IO address. When used in QEMU the kernel image loaded with
the '-kernel' option gets restored to its original state allowing the
machine to boot successfully.
Use that mechanism to attempt a platform reset. If it does not work,
fall back to the existing mechanism.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Use platform data to initialize xtfpga device drivers when CONFIG_USE_OF
is not selected. This fixes xtfpga networking when CONFIG_USE_OF is not
selected but CONFIG_OF is.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The section structure already contains sh_size, so just remove the extra
'len' member that requires extra mirroring and potential confusion.
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20210822225037.54620-3-joe.lawrence@redhat.com
Cc: Andy Lavr <andy.lavr@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Commit e31694e0a7 ("objtool: Don't make .altinstructions writable")
aligned objtool-created and kernel-created .altinstructions section
flags, but there remains a minor discrepency in their use of a section
entry size: objtool sets one while the kernel build does not.
While sh_entsize of sizeof(struct alt_instr) seems intuitive, this small
deviation can cause failures with external tooling (kpatch-build).
Fix this by creating new .altinstructions sections with sh_entsize of 0
and then later updating sec->sh_size as alternatives are added to the
section. An added benefit is avoiding the data descriptor and buffer
created by elf_create_section(), but previously unused by
elf_add_alternative().
Fixes: 9bc0bb5072 ("objtool/x86: Rewrite retpoline thunk calls")
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20210822225037.54620-2-joe.lawrence@redhat.com
Cc: Andy Lavr <andy.lavr@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Converting a special section's relocation reference to a symbol is
straightforward. No need for objtool to complain that it doesn't know
how to handle it. Just handle it.
This fixes the following warning:
arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception
Fixes: 24ff652573 ("objtool: Teach get_alt_entry() about more relocation types")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/feadbc3dfb3440d973580fad8d3db873cbfe1694.1633367242.git.jpoimboe@redhat.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: x86@kernel.org
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: linux-kernel@vger.kernel.org
Mark's fix adds a MODULE_DEVICE_TABLE to ensure module autoloading
works for the Lattice ice-40-spi FPGA Manager driver.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my fixes branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIUEABYIAC0WIQSdhnt2PwibB65UG0C3mJX/Vsn7uQUCYVyXBQ8cbWRmQGtlcm5l
bC5vcmcACgkQt5iV/1bJ+7lLHgD+IMeyAxiah+UjtqaqV6Ndn0T1GAGeZwbt4kyL
hRC7DoUBAP+R8J4Y0A2dngCs96XKMoankCKrVLaDVLNUrv6/CBoM
=7feO
-----END PGP SIGNATURE-----
Merge tag 'fpga-fixes-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next
Moritz writes:
FPGA Manager fixes for 5.15
Mark's fix adds a MODULE_DEVICE_TABLE to ensure module autoloading
works for the Lattice ice-40-spi FPGA Manager driver.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my fixes branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-fixes-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
fpga: ice40-spi: Add SPI device ID table
The Topdown metrics events were added as 'perf stat' default events
since commit 42641d6f4d ("perf stat: Add Topdown metrics events as
default events").
However, the perf attr tests were not updated
accordingly.
The perf attr test fails on the platform which supports Topdown metrics.
# perf test 17
17: Setup struct perf_event_attr :FAILED!
Add Topdown metrics events into perf attr test cases. Make them optional
since they are only available on newer platforms.
Fixes: 42641d6f4d ("perf stat: Add Topdown metrics events as default events")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/1633031566-176517-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----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=kSrV
-----END PGP SIGNATURE-----
Merge tag 'warning-fixes-20211005' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull misc fs warning fixes from David Howells:
"The first four patches fix kerneldoc warnings in fscache, afs, 9p and
nfs - they're mostly just comment changes, though there's one place in
9p where a comment got detached from the function it was attached to
(v9fs_fid_add) and has to switch places with a function that got
inserted between (__add_fid).
The patch on the end removes an unused symbol in fscache"
* tag 'warning-fixes-20211005' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
fscache: Remove an unused static variable
fscache: Fix some kerneldoc warnings shown up by W=1
9p: Fix a bunch of kerneldoc warnings shown up by W=1
afs: Fix kerneldoc warning shown up by W=1
nfs: Fix kerneldoc warning shown up by W=1
Picking the changes from:
09d2317440 ("ALSA: rawmidi: introduce SNDRV_RAWMIDI_IOCTL_USER_PVERSION")
Which entails no changes in the tooling side as it doesn't introduce new
SNDRV_PCM_IOCTL_ ioctls.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are a couple of subtle error path bugs related to mapping the sgls:
- In rdma_rw_ctx_init(), dma_unmap would be called with an sg that could
have been incremented from the original call, as well as an nents that
is the dma mapped entries not the original number of nents called when
mapped.
- Similarly in rdma_rw_ctx_signature_init, both sg and prot_sg were
unmapped with the incorrect number of nents.
To fix this, switch to the sgtable interface for mapping which
conveniently stores the original nents for unmapping. This will get
cleaned up further once the dma mapping interface supports P2PDMA and
pci_p2pdma_map_sg() can be removed.
Fixes: 0e353e34e1 ("IB/core: add RW API support for signature MRs")
Fixes: a060b5629a ("IB/core: generic RDMA READ/WRITE API")
Link: https://lore.kernel.org/r/20211001213215.3761-1-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Filter out -static flag when building plugins as they are always built
as dynamic libraries and -static and -dynamic don't work well together
on arm and arm64.
Signed-off-by: Branislav Rankov <branislav.rankov@arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Brown <Mark.Brown@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: coresight@lists.linaro.org
Cc: nd@arm.com
Link: https://lore.kernel.org/r/e88952b3-2470-da96-dee9-e247a1759cd0@arm.com
Signed-off-by: Tamas Zsoldos <tamas.zsoldos@arm.com>
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add -lstdc++ to perf when linking libopencsd as it is a dependency. It
does not hurt to add it when dynamic linking.
Signed-off-by: Branislav Rankov <branislav.rankov@arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Brown <Mark.Brown@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: coresight@lists.linaro.org
Cc: nd@arm.com
Link: https://lore.kernel.org/r/e88952b3-2470-da96-dee9-e247a1759cd0@arm.com
Signed-off-by: Tamas Zsoldos <tamas.zsoldos@arm.com>
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The compiler reports that free_sys_event_tables() is dead code.
But according to the semantics, the "LIST_HEAD(sys_event_tables)" should
also be released, just like we do with 'arch_std_events' in main().
Fixes: e9d32c1bf0 ("perf vendor events: Add support for arch standard events")
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210928102938.69681-1-likexu@tencent.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check whether PMC is ready before proceeding with the cpuidle registration.
This fixes racing with the PMC driver probe order, which results in a
disabled deepest CC6 idling state if cpuidle driver is probed before the
PMC.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In current code, when a PCI error state pci_channel_io_normal is detectd,
it will report PCI_ERS_RESULT_CAN_RECOVER status to PCI driver, and PCI
driver will continue the execution of PCI resume callback report_resume by
pci_walk_bridge, and the callback will go into amdgpu_pci_resume
finally, where write lock is releasd unconditionally without acquiring
such lock first. In this case, a deadlock will happen when other threads
start to acquire the read lock.
To fix this, add a member in amdgpu_device strucutre to cache
pci_channel_state, and only continue the execution in amdgpu_pci_resume
when it's pci_channel_io_frozen.
Fixes: c9a6b82f45 ("drm/amdgpu: Implement DPC recovery")
Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
