Commit graph

1,058,063 commits

Author SHA1 Message Date
Thomas Gleixner
37e8abff2b locking/rtmutex: Dequeue waiter on ww_mutex deadlock
The rt_mutex based ww_mutex variant queues the new waiter first in the
lock's rbtree before evaluating the ww_mutex specific conditions which
might decide that the waiter should back out. This check and conditional
exit happens before the waiter is enqueued into the PI chain.

The failure handling at the call site assumes that the waiter, if it is the
top most waiter on the lock, is queued in the PI chain and then proceeds to
adjust the unmodified PI chain, which results in RB tree corruption.

Dequeue the waiter from the lock waiter list in the ww_mutex error exit
path to prevent this.

Fixes: add461325e ("locking/rtmutex: Extend the rtmutex core to support ww_mutex")
Reported-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210825102454.042280541@linutronix.de
2021-08-25 15:42:33 +02:00
Thomas Gleixner
c3123c4314 locking/rtmutex: Dont dereference waiter lockless
The new rt_mutex_spin_on_onwer() loop checks whether the spinning waiter is
still the top waiter on the lock by utilizing rt_mutex_top_waiter(), which
is broken because that function contains a sanity check which dereferences
the top waiter pointer to check whether the waiter belongs to the
lock. That's wrong in the lockless spinwait case:

 CPU 0							CPU 1
 rt_mutex_lock(lock)					rt_mutex_lock(lock);
   queue(waiter0)
   waiter0 == rt_mutex_top_waiter(lock)
   rt_mutex_spin_on_onwer(lock, waiter0) {		queue(waiter1)
   					 		waiter1 == rt_mutex_top_waiter(lock)
   							...
     top_waiter = rt_mutex_top_waiter(lock)
       leftmost = rb_first_cached(&lock->waiters);
							-> signal
							dequeue(waiter1)
							destroy(waiter1)
       w = rb_entry(leftmost, ....)
       BUG_ON(w->lock != lock)	 <- UAF

The BUG_ON() is correct for the case where the caller holds lock->wait_lock
which guarantees that the leftmost waiter entry cannot vanish. For the
lockless spinwait case it's broken.

Create a new helper function which avoids the pointer dereference and just
compares the leftmost entry pointer with current's waiter pointer to
validate that currrent is still elegible for spinning.

Fixes: 992caf7f17 ("locking/rtmutex: Add adaptive spinwait mechanism")
Reported-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210825102453.981720644@linutronix.de
2021-08-25 15:42:32 +02:00
Xiaoyao Li
c53c6b7409 perf/x86/intel/pt: Fix mask of num_address_ranges
Per SDM, bit 2:0 of CPUID(0x14,1).EAX[2:0] reports the number of
configurable address ranges for filtering, not bit 1:0.

Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lkml.kernel.org/r/20210824040622.4081502-1-xiaoyao.li@intel.com
2021-08-25 15:42:31 +02:00
Chen-Yu Tsai
21e39809fd
regulator: vctrl: Avoid lockdep warning in enable/disable ops
vctrl_enable() and vctrl_disable() call regulator_enable() and
regulator_disable(), respectively. However, vctrl_* are regulator ops
and should not be calling the locked regulator APIs. Doing so results in
a lockdep warning.

Instead of exporting more internal regulator ops, model the ctrl supply
as an actual supply to vctrl-regulator. At probe time this driver still
needs to use the consumer API to fetch its constraints, but otherwise
lets the regulator core handle the upstream supply for it.

The enable/disable/is_enabled ops are not removed, but now only track
state internally. This preserves the original behavior with the ops
being available, but one could argue that the original behavior was
already incorrect: the internal state would not match the upstream
supply if that supply had another consumer that enabled the supply,
while vctrl-regulator was not enabled.

The lockdep warning is as follows:

	WARNING: possible circular locking dependency detected
	5.14.0-rc6 #2 Not tainted
	------------------------------------------------------
	swapper/0/1 is trying to acquire lock:
	ffffffc011306d00 (regulator_list_mutex){+.+.}-{3:3}, at:
		regulator_lock_dependent (arch/arm64/include/asm/current.h:19
					  include/linux/ww_mutex.h:111
					  drivers/regulator/core.c:329)

	but task is already holding lock:
	ffffff8004a77160 (regulator_ww_class_mutex){+.+.}-{3:3}, at:
		regulator_lock_recursive (drivers/regulator/core.c:156
					  drivers/regulator/core.c:263)

	which lock already depends on the new lock.

	the existing dependency chain (in reverse order) is:

	-> #2 (regulator_ww_class_mutex){+.+.}-{3:3}:
	__mutex_lock_common (include/asm-generic/atomic-instrumented.h:606
			     include/asm-generic/atomic-long.h:29
			     kernel/locking/mutex.c:103
			     kernel/locking/mutex.c:144
			     kernel/locking/mutex.c:963)
	ww_mutex_lock (kernel/locking/mutex.c:1199)
	regulator_lock_recursive (drivers/regulator/core.c:156
				  drivers/regulator/core.c:263)
	regulator_lock_dependent (drivers/regulator/core.c:343)
	regulator_enable (drivers/regulator/core.c:2808)
	set_machine_constraints (drivers/regulator/core.c:1536)
	regulator_register (drivers/regulator/core.c:5486)
	devm_regulator_register (drivers/regulator/devres.c:196)
	reg_fixed_voltage_probe (drivers/regulator/fixed.c:289)
	platform_probe (drivers/base/platform.c:1427)
	[...]

	-> #1 (regulator_ww_class_acquire){+.+.}-{0:0}:
	regulator_lock_dependent (include/linux/ww_mutex.h:129
				  drivers/regulator/core.c:329)
	regulator_enable (drivers/regulator/core.c:2808)
	set_machine_constraints (drivers/regulator/core.c:1536)
	regulator_register (drivers/regulator/core.c:5486)
	devm_regulator_register (drivers/regulator/devres.c:196)
	reg_fixed_voltage_probe (drivers/regulator/fixed.c:289)
	[...]

	-> #0 (regulator_list_mutex){+.+.}-{3:3}:
	__lock_acquire (kernel/locking/lockdep.c:3052 (discriminator 4)
			kernel/locking/lockdep.c:3174 (discriminator 4)
			kernel/locking/lockdep.c:3789 (discriminator 4)
			kernel/locking/lockdep.c:5015 (discriminator 4))
	lock_acquire (arch/arm64/include/asm/percpu.h:39
		      kernel/locking/lockdep.c:438
		      kernel/locking/lockdep.c:5627)
	__mutex_lock_common (include/asm-generic/atomic-instrumented.h:606
			     include/asm-generic/atomic-long.h:29
			     kernel/locking/mutex.c:103
			     kernel/locking/mutex.c:144
			     kernel/locking/mutex.c:963)
	mutex_lock_nested (kernel/locking/mutex.c:1125)
	regulator_lock_dependent (arch/arm64/include/asm/current.h:19
				  include/linux/ww_mutex.h:111
				  drivers/regulator/core.c:329)
	regulator_enable (drivers/regulator/core.c:2808)
	vctrl_enable (drivers/regulator/vctrl-regulator.c:400)
	_regulator_do_enable (drivers/regulator/core.c:2617)
	_regulator_enable (drivers/regulator/core.c:2764)
	regulator_enable (drivers/regulator/core.c:308
			  drivers/regulator/core.c:2809)
	_set_opp (drivers/opp/core.c:819 drivers/opp/core.c:1072)
	dev_pm_opp_set_rate (drivers/opp/core.c:1164)
	set_target (drivers/cpufreq/cpufreq-dt.c:62)
	__cpufreq_driver_target (drivers/cpufreq/cpufreq.c:2216
				 drivers/cpufreq/cpufreq.c:2271)
	cpufreq_online (drivers/cpufreq/cpufreq.c:1488 (discriminator 2))
	cpufreq_add_dev (drivers/cpufreq/cpufreq.c:1563)
	subsys_interface_register (drivers/base/bus.c:?)
	cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2819)
	dt_cpufreq_probe (drivers/cpufreq/cpufreq-dt.c:344)
	[...]

	other info that might help us debug this:

	Chain exists of:
	  regulator_list_mutex --> regulator_ww_class_acquire --> regulator_ww_class_mutex

	 Possible unsafe locking scenario:

	       CPU0                    CPU1
	       ----                    ----
	  lock(regulator_ww_class_mutex);
				       lock(regulator_ww_class_acquire);
				       lock(regulator_ww_class_mutex);
	  lock(regulator_list_mutex);

	 *** DEADLOCK ***

	6 locks held by swapper/0/1:
	#0: ffffff8002d32188 (&dev->mutex){....}-{3:3}, at:
		__device_driver_lock (drivers/base/dd.c:1030)
	#1: ffffffc0111a0520 (cpu_hotplug_lock){++++}-{0:0}, at:
		cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2792 (discriminator 2))
	#2: ffffff8002a8d918 (subsys mutex#9){+.+.}-{3:3}, at:
		subsys_interface_register (drivers/base/bus.c:1033)
	#3: ffffff800341bb90 (&policy->rwsem){+.+.}-{3:3}, at:
		cpufreq_online (include/linux/bitmap.h:285
				include/linux/cpumask.h:405
				drivers/cpufreq/cpufreq.c:1399)
	#4: ffffffc011f0b7b8 (regulator_ww_class_acquire){+.+.}-{0:0}, at:
		regulator_enable (drivers/regulator/core.c:2808)
	#5: ffffff8004a77160 (regulator_ww_class_mutex){+.+.}-{3:3}, at:
		regulator_lock_recursive (drivers/regulator/core.c:156
		drivers/regulator/core.c:263)

	stack backtrace:
	CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.14.0-rc6 #2 7c8f8996d021ed0f65271e6aeebf7999de74a9fa
	Hardware name: Google Scarlet (DT)
	Call trace:
	dump_backtrace (arch/arm64/kernel/stacktrace.c:161)
	show_stack (arch/arm64/kernel/stacktrace.c:218)
	dump_stack_lvl (lib/dump_stack.c:106 (discriminator 2))
	dump_stack (lib/dump_stack.c:113)
	print_circular_bug (kernel/locking/lockdep.c:?)
	check_noncircular (kernel/locking/lockdep.c:?)
	__lock_acquire (kernel/locking/lockdep.c:3052 (discriminator 4)
			kernel/locking/lockdep.c:3174 (discriminator 4)
			kernel/locking/lockdep.c:3789 (discriminator 4)
			kernel/locking/lockdep.c:5015 (discriminator 4))
	lock_acquire (arch/arm64/include/asm/percpu.h:39
		      kernel/locking/lockdep.c:438
		      kernel/locking/lockdep.c:5627)
	__mutex_lock_common (include/asm-generic/atomic-instrumented.h:606
			     include/asm-generic/atomic-long.h:29
			     kernel/locking/mutex.c:103
			     kernel/locking/mutex.c:144
			     kernel/locking/mutex.c:963)
	mutex_lock_nested (kernel/locking/mutex.c:1125)
	regulator_lock_dependent (arch/arm64/include/asm/current.h:19
				  include/linux/ww_mutex.h:111
				  drivers/regulator/core.c:329)
	regulator_enable (drivers/regulator/core.c:2808)
	vctrl_enable (drivers/regulator/vctrl-regulator.c:400)
	_regulator_do_enable (drivers/regulator/core.c:2617)
	_regulator_enable (drivers/regulator/core.c:2764)
	regulator_enable (drivers/regulator/core.c:308
			  drivers/regulator/core.c:2809)
	_set_opp (drivers/opp/core.c:819 drivers/opp/core.c:1072)
	dev_pm_opp_set_rate (drivers/opp/core.c:1164)
	set_target (drivers/cpufreq/cpufreq-dt.c:62)
	__cpufreq_driver_target (drivers/cpufreq/cpufreq.c:2216
				 drivers/cpufreq/cpufreq.c:2271)
	cpufreq_online (drivers/cpufreq/cpufreq.c:1488 (discriminator 2))
	cpufreq_add_dev (drivers/cpufreq/cpufreq.c:1563)
	subsys_interface_register (drivers/base/bus.c:?)
	cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2819)
	dt_cpufreq_probe (drivers/cpufreq/cpufreq-dt.c:344)
	[...]

Reported-by: Brian Norris <briannorris@chromium.org>
Fixes: f8702f9e4a ("regulator: core: Use ww_mutex for regulators locking")
Fixes: e915331149 ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210825033704.3307263-3-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-25 14:17:53 +01:00
Chen-Yu Tsai
98e47570ba
regulator: vctrl: Use locked regulator_get_voltage in probe path
In commit e915331149 ("regulator: vctrl-regulator: Avoid deadlock getting
and setting the voltage"), all calls to get/set the voltage of the
control regulator were switched to unlocked versions to avoid deadlocks.
However, the call in the probe path is done without regulator locks
held. In this case the locked version should be used.

Switch back to the locked regulator_get_voltage() in the probe path to
avoid any mishaps.

Fixes: e915331149 ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210825033704.3307263-2-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-25 14:17:52 +01:00
Shengjiu Wang
a8946f032e
ASoC: imx-rpmsg: change dev_err to dev_err_probe for -EPROBE_DEFER
Change dev_err to dev_err_probe for no need print error message
when defer probe happens.

Fixes: 39f8405c3e ("ASoC: imx-rpmsg: Add machine driver for audio base on rpmsg")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1629875681-16373-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-25 14:15:47 +01:00
Derek Fang
8d3019b63b
ASoC: rt5682: Fix the vol+ button detection issue
Fix the wrong button vol+ detection issue with some brand headsets
by fine tuning the threshold of button vol+ and SAR ADC button accuracy.

Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20210825040346.28346-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-25 14:15:46 +01:00
Peter Ujfalusi
dc2d01c754
ASoC: Intel: bytcr_rt5640: Make rt5640_jack_gpio/rt5640_jack2_gpio static
Marking the two jack gpio as static fixes the following Sparse errors:
sound/soc/intel/boards/bytcr_rt5640.c:468:26: error: symbol 'rt5640_jack_gpio' was not declared. Should it be static?
sound/soc/intel/boards/bytcr_rt5640.c:475:26: error: symbol 'rt5640_jack2_gpio' was not declared. Should it be static?

Fixes: 9ba0085668 ("ASoC: Intel: bytcr_rt5640: Add support for HP Elite Pad 1000G2 jack-detect")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210825122519.3364-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-25 14:15:45 +01:00
Mark Brown
2d02e7d7d0
Merge branch 'for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.15 2021-08-25 14:14:30 +01:00
Qu Wenruo
4e9655763b Revert "btrfs: compression: don't try to compress if we don't have enough pages"
This reverts commit f216562731.

[BUG]
It's no longer possible to create compressed inline extent after commit
f216562731 ("btrfs: compression: don't try to compress if we don't
have enough pages").

[CAUSE]
For compression code, there are several possible reasons we have a range
that needs to be compressed while it's no more than one page.

- Compressed inline write
  The data is always smaller than one sector and the test lacks the
  condition to properly recognize a non-inline extent.

- Compressed subpage write
  For the incoming subpage compressed write support, we require page
  alignment of the delalloc range.
  And for 64K page size, we can compress just one page into smaller
  sectors.

For those reasons, the requirement for the data to be more than one page
is not correct, and is already causing regression for compressed inline
data writeback.  The idea of skipping one page to avoid wasting CPU time
could be revisited in the future.

[FIX]
Fix it by reverting the offending commit.

Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Link: https://lore.kernel.org/linux-btrfs/afa2742.c084f5d6.17b6b08dffc@tnonline.net
Fixes: f216562731 ("btrfs: compression: don't try to compress if we don't have enough pages")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-08-25 15:08:19 +02:00
Christoph Hellwig
1d1cf156dc sg: pass the device name to blk_trace_setup
Fix a regression that passed a NULL device name to blk_trace_setup
accidentally.

Fixes: aebbb5831f ("sg: do not allocate a gendisk")
Reported-by: syzbot+f74aa89114a236643919@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Link: https://lore.kernel.org/r/20210825075438.1883687-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-25 06:46:54 -06:00
Shaokun Zhang
1e294970fc block, bfq: cleanup the repeated declaration
Function 'bfq_entity_to_bfqq' is declared twice, so remove the
repeated declaration and blank line.

Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1629872391-46399-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-25 06:45:33 -06:00
Eric Biggers
cc40b72251 blk-crypto: fix check for too-large dun_bytes
dun_bytes needs to be less than or equal to the IV size of the
encryption mode, not just less than or equal to BLK_CRYPTO_MAX_IV_SIZE.

Currently this doesn't matter since blk_crypto_init_key() is never
actually passed invalid values, but we might as well fix this.

Fixes: a892c8d52c ("block: Inline encryption support for blk-mq")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210825055918.51975-1-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-25 06:45:00 -06:00
David S. Miller
e3f30ab28a Merge branch 'pktgen-samples-next'
Juhee Kang says:

====================
samples: pktgen: enhance the ability to print the execution results of samples

This patch series improves the ability to print the execution result of pktgen
samples by adding a line which calls the function before termination and adding
trap SIGINT. Also, this series documents the latest pktgen usage options.

Currently, pktgen samples print the execution result when terminated usually.
However, sample03 is not working properly.

This is results of sample04 and sample03:

    # DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample04_many_flows.sh -n 1
    Running... ctrl^C to stop
    Device: eth0@0
    Result: OK: 19(c5+d13) usec, 1 (60byte,0frags)
    51762pps 24Mb/sec (24845760bps) errors: 0

    # DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample03_burst_single_flow.sh -n 1
    Running... ctrl^C to stop

Because sample03 doesn't call the function which prints the execution result
when terminated normally, unlike other samples. So the first commit solves
this issue by adding a line which calls the function before termination.

Also, all pktgen samples are able to send infinite messages per thread by
setting the count option to 0, and pktgen is stopped by Ctrl-C. However,
the sample besides sample{3...5} don't work appropriately because Ctrl-C stops
the script, not just pktgen.

This is results of samples:

    # DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample04_many_flows.sh -n 0
    Running... ctrl^C to stop
    ^CDevice: eth0@0
    Result: OK: 569657(c569538+d118) usec, 84650 (60byte,0frags)
    148597pps 71Mb/sec (71326560bps) errors: 0

    # DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample01_simple.sh -n 0
    Running... ctrl^C to stop
    ^C

    # DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample02_multiqueue.sh -n 0
    Running... ctrl^C to stop
    ^C

    # DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample06_numa_awared_queue_irq_affinity.sh -n 0
    Running... ctrl^C to stop
    ^C

    # DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_bench_xmit_mode_netif_receive.sh -n 0
    Running... ctrl^C to stop
    ^C

    # DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_bench_xmit_mode_queue_xmit.sh -n 0
    Running... ctrl^C to stop
    ^C

So the second commit solves this issue by adding trap SIGINT. Also, changes
control_c function to print_results to maintain consistency with other samples
on the first commit and second commit.

And current pktgen.rst documentation doesn't add the latest pktgen sample
usage options such as count and IPv6, and so on. Also, the old pktgen
sample scripts are still included in the document. The old scripts were removed
by the commit a4b6ade835 ("samples/pktgen: remove remaining old pktgen
sample scripts").

Thus, the last commit documents the latest pktgen sample usage and removes
old sample scripts. And fixes a minor typo.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25 13:44:30 +01:00
Juhee Kang
246b184fff pktgen: document the latest pktgen usage options
Currently, the pktgen.rst documentation doesn't cover the latest pktgen
sample usage options such as count and IPv6, and so on. Also, this
documentation includes the old sample scripts which are no longer use
because it was removed by the commit a4b6ade835 ("samples/pktgen :
remove remaining old pktgen sample scripts")

Thus, this commit documents pktgen sample usage using the latest options
and removes old sample scripts, and fixes a minor typo.

Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25 13:44:30 +01:00
Juhee Kang
6c882bdc4b samples: pktgen: add trap SIGINT for printing execution result
All pktgen samples can send indefinitely num messages per thread by
setting the count option to 0(-n 0). If running sample with setting
count 0 and press Ctrl-C to stop this program, the program prints the
result of the execution so far. Currently, the samples besides
sample{3...5} don't work properly. Because Ctrl-C stops the script, not
just pktgen.

This is results of samples:

    # DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample04_many_flows.sh -n 0
    Running... ctrl^C to stop
    ^CDevice: eth0@0
    Result: OK: 569657(c569538+d118) usec, 84650 (60byte,0frags)
    148597pps 71Mb/sec (71326560bps) errors: 0

    # DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample01_simple.sh -n 0
    Running... ctrl^C to stop
    ^C

In order to solve this, this commit adds trap SIGINT. Also, this commit
changes control_c function to print_result to maintain consistency with
other samples.

Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25 13:44:30 +01:00
Juhee Kang
c0e9422c4e samples: pktgen: fix to print when terminated normally
Currently, most pktgen samples print the execution result when the
program is terminated normally. However, sample03 doesn't work
appropriately.

This is results of samples:

    # DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample04_many_flows.sh -n 1
    Running... ctrl^C to stop
    Device: eth0@0
    Result: OK: 19(c5+d13) usec, 1 (60byte,0frags)
    51762pps 24Mb/sec (24845760bps) errors: 0

    # DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample03_burst_single_flow.sh -n 1
    Running... ctrl^C to stop

The reason why it doesn't print the execution result when the program is
terminated usually is that sample03 doesn't call the function which
prints the result, unlike other samples.

So, this commit solves this issue by calling the function before
termination. Also, this commit changes control_c function to
print_result to maintain consistency with other samples.

Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25 13:44:30 +01:00
David S. Miller
9270c565b0 Merge branch 'octeontx2-traffic-shaping'
Sunil Goutham says:

====================
Octeontx2: Traffic shaping and SDP link config support

This patch series adds support for traffic shaping configuration
on all silicons available after 96xx C0. And also adds SDP link
related configuration needed when Octeon is connected as an end-point
and traffic needs to flow from end-point to host and vice versa.

Series also has other changes like
- New mbox messages in admin function driver for PF/VF drivers
  to retrieve available HW resource count. HW resources like block LFs,
  bandwidth profiles etc are covered.
- Added PTP device ID for new CN10K and 95O silicons.
- etc
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25 13:39:02 +01:00
Sunil Goutham
66c312ea1d octeontx2-af: Add mbox to retrieve bandwidth profile free count
Added mbox for PF/VF drivers to retrieve current ingress bandwidth
profile free count. Also added current policer timeunit
configuration info based on which ratelimiting decisions can be
taken by PF/VF drivers.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25 13:39:02 +01:00
Sunil Goutham
18603683d7 octeontx2-af: Remove channel verification while installing MCAM rules
New usecases are popping up where in user wants to install common MCAM
filters for all interfaces. Having channel verification will result in
duplicating such MCAM filters for each of the ingress interface. Hence
removed channel verification.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25 13:39:01 +01:00
Subbaraya Sundeep
a8b90c9d26 octeontx2-af: Add PTP device id for CN10K and 95O silcons
CN10K slicon has different device id for PTP device.
Hence this patch updates the driver with new id.
Though ptp driver being a separate driver AF manages
configuring PTP block by all PFs. To manage ptp, AF
driver checks in its probe whether
1. ptp hardware device found on silicon
2. A driver is bound to ptp device
3. The ptp driver probe is successful

In failure of cases 1 and 3, AF proceeds with out ptp
and for case 2 defers the probe. This patch refactors
code also to check for all the PTP device ids given in
ptp device ids table for case 1.

Also added PTP device ID for 95O silicon

Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25 13:39:01 +01:00
George Cherian
275e5d175d octeontx2-af: Add free rsrc count mbox msg
Upon receiving the MBOX_MSG_FREE_RSRC_CNT, the AF will find out the
current number of free resources and reply it back to the requester. No
guarantee is given on the future state of the free resources yet.
If another requester sends MBOX_MSG_ATTACH_RESOURCES after this call,
the number of available resources might change.

Signed-off-by: George Cherian <george.cherian@marvell.com>
Signed-off-by: Stanislaw Kardach <skardach@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25 13:39:01 +01:00
Radha Mohan Chintakuntla
fe1939bb23 octeontx2-af: Add SDP interface support
Added support for packet IO via SDK links which is used when
Octeon is connected as a end-point. Traffic host to end-point
and vice versa flow through SDP links. This patch also support
dual SDP blocks supported in 98xx silicon.

Signed-off-by: Radha Mohan Chintakuntla <radhac@marvell.com>
Signed-off-by: Nalla Pradeep <pnalla@marvell.com>
Signed-off-by: Subrahmanyam Nilla <snilla@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25 13:39:01 +01:00
Harman Kalra
aefaa8c715 octeontx2-af: nix and lbk in loop mode in 98xx
In 98xx, there are 2 NIX blocks and 4 LBK blocks present. The way
these NIX-LBK should be configured depends on the use case. By
default loopback functionality is supported in AF VF pairs which
are attached to NIX0 and NIX1 LFs alternatively to ensure load
balancing. NIX0 transmits a packet to LBK1 which will be received
by NIX1 and packet transmitted by NIX1 will get received by NIX0 via
LBK2.

There are some requirements where only one AF VF is used and respective
NIX is expected to operate in a mode where it can receive it own packet
back. This can be achieved if NIX0 sends packet to LBK0 and not LBK1.
Adding a flag in LF alloc request mailbox which can setup NIX0 to use
LBK0 and NIX1 can use LBK3.

Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25 13:39:01 +01:00
Subbaraya Sundeep
039190bb35 octeontx2-pf: cleanup transmit link deriving logic
Unlike OcteonTx2, the channel numbers used by CGX/RPM
and LBK on CN10K silicons aren't fixed in HW. They are
SW programmable, hence we cannot derive transmit link
from static channel numbers anymore. Get the same from
admin function via mailbox.

Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25 13:39:01 +01:00
Jerin Jacob
72e192a163 octeontx2-af: Allow to configure flow tag LSB byte as RSS adder
Before C0 HW revision, The RSS adder was computed based the
following static formula.

rss_adder<7:0> = flow_tag<7:0> ^ flow_tag<15:8> ^
flow_tag<23:16> ^ flow_tag<31:24>

The above scheme has the following drawbacks:
1) It is not in line with other standard NIC behavior.
2) There can be an SW use case where SW can compute the hash
upfront using Toeplitz function and predict the queue selection
to optimize some packet lookup function. The nonstandard
way of doing XOR makes the consumer to not predict the queue selection.

C0 HW revision onwards, The HW can configure the
rss_adder<7:0> as flow_tag<7:0> to align with standard NICs.

This patch adds an option to select legacy RSS adder mode
vs standard NIC behavior by setting NIX_LF_RSS_TAG_LSB_AS_ADDER flag.

Since this bit field is used as reserved in old HW revisions,
No need to have an additional HW version check.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25 13:39:01 +01:00
Nithin Dabilpuram
d06411632e octeontx2-af: enable tx shaping feature for 96xx C0
Starting from 96xx C0 onwards all silicons support traffic shaping.
This patch enables that feature along with other changes
- When PIR/CIR shaping config is modified, toggle SW_XOFF
  for config to take effect
- Before SMQ flush, clear SW_XOFF at all parent schedulers
- Support to read current transmit scheduler configuration via mbox

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25 13:39:01 +01:00
Kajol Jain
3c69a5f222 powerpc/perf: Fix the check for SIAR value
Incase of random sampling, there can be scenarios where
Sample Instruction Address Register(SIAR) may not latch
to the sampled instruction and could result in
the value of 0. In these scenarios it is preferred to
return regs->nip. These corner cases are seen in the
previous generation (p9) also.

Patch adds the check for SIAR value along with regs_use_siar
and siar_valid checks so that the function will return
regs->nip incase SIAR is zero.

Patch drops the code under PPMU_P10_DD1 flag check
which handles SIAR 0 case only for Power10 DD1.

Fixes: 2ca13a4cc5 ("powerpc/perf: Use regs->nip when SIAR is zero")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210818171556.36912-3-kjain@linux.ibm.com
2021-08-25 22:38:19 +10:00
Kajol Jain
cc90c6742e powerpc/perf: Drop the case of returning 0 as instruction pointer
Drop the case of returning 0 as instruction pointer since kernel
never executes at 0 and userspace almost never does either.

Fixes: e6878835ac ("powerpc/perf: Sample only if SIAR-Valid bit is set in P7+")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210818171556.36912-2-kjain@linux.ibm.com
2021-08-25 22:38:19 +10:00
Kajol Jain
b1643084d1 powerpc/perf: Use stack siar instead of mfspr
Minor optimization in the 'perf_instruction_pointer' function code by
making use of stack siar instead of mfspr.

Fixes: 75382aa72f ("powerpc/perf: Move code to select SIAR or pt_regs into perf_read_regs")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210818171556.36912-1-kjain@linux.ibm.com
2021-08-25 22:38:18 +10:00
Pavel Begunkov
aaa4db12ef io_uring: accept directly into fixed file table
As done with open opcodes, allow accept to skip installing fd into
processes' file tables and put it directly into io_uring's fixed file
table. Same restrictions and design as for open.

Suggested-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/6d16163f376fac7ac26a656de6b42199143e9721.1629888991.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-25 06:36:56 -06:00
Pavel Begunkov
a7083ad5e3 io_uring: hand code io_accept() fd installing
Make io_accept() to handle file descriptor allocations and installation.
A preparation patch for bypassing file tables.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/5b73d204caa0ce979ccb98136695b60f52a3d98c.1629888991.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-25 06:36:56 -06:00
Pavel Begunkov
b9445598d8 io_uring: openat directly into fixed fd table
Instead of opening a file into a process's file table as usual and then
registering the fd within io_uring, some users may want to skip the
first step and place it directly into io_uring's fixed file table.
This patch adds such a capability for IORING_OP_OPENAT and
IORING_OP_OPENAT2.

The behaviour is controlled by setting sqe->file_index, where 0 implies
the old behaviour using normal file tables. If non-zero value is
specified, then it will behave as described and place the file into a
fixed file slot sqe->file_index - 1. A file table should be already
created, the slot should be valid and empty, otherwise the operation
will fail.

Keep the error codes consistent with IORING_OP_FILES_UPDATE, ENXIO and
EINVAL on inappropriate fixed tables, and return EBADF on collision with
already registered file.

Note: IOSQE_FIXED_FILE can't be used to switch between modes, because
accept takes a file, and it already uses the flag with a different
meaning.

Suggested-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/e9b33d1163286f51ea707f87d95bd596dada1e65.1629888991.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-25 06:36:56 -06:00
Pavel Begunkov
d32f89da7f net: add accept helper not installing fd
Introduce and reuse a helper that acts similarly to __sys_accept4_file()
but returns struct file instead of installing file descriptor. Will be
used by io_uring.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Acked-by: David S. Miller <davem@davemloft.net>
Link: https://lore.kernel.org/r/c57b9e8e818d93683a3d24f8ca50ca038d1da8c4.1629888991.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-25 06:36:56 -06:00
Johannes Berg
bbac7a92a4 dmaengine: ioat: depends on !UML
Now that UML has PCI support, this driver must depend also on
!UML since it pokes at X86_64 architecture internals that don't
exist on ARCH=um.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20210809112409.a3a0974874d2.I2ffe3d11ed37f735da2f39884a74c953b258b995@changeid
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-25 17:01:32 +05:30
Dave Jiang
9806eb5c79 dmaengine: idxd: set descriptor allocation size to threshold for swq
Since submission is sent to limited portal, the actual wq size for shared
wq is set by the threshold rather than the wq size. When the wq type is
shared, set the allocated descriptors to the threshold.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162827151733.3459223.3829837172226042408.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-25 17:00:24 +05:30
Dave Jiang
0b030f54f0 dmaengine: idxd: make submit failure path consistent on desc freeing
The submission path for dmaengine API does not do descriptor freeing on
failure. Also, with the abort mechanism, the freeing of descriptor happens
when the abort callback is completed. Therefore free descriptor on all
error paths for submission call to make things consistent. Also remove the
double free that would happen on abort in idxd_dma_tx_submit() call.

Fixes: 6b4b87f2c3 ("dmaengine: idxd: fix submission race window")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162827146072.3459011.10255348500504659810.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-25 17:00:24 +05:30
Cai Huoqing
fbcf8a3401 net: ethernet: actions: Add helper dependency on COMPILE_TEST
it's helpful for complie test in other platform(e.g.X86)

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25 12:06:53 +01:00
Lukas Bulwahn
7bc416f147 netfilter: x_tables: handle xt_register_template() returning an error value
Commit fdacd57c79 ("netfilter: x_tables: never register tables by
default") introduces the function xt_register_template(), and in one case,
a call to that function was missing the error-case handling.

Handle when xt_register_template() returns an error value.

This was identified with the clang-analyzer's Dead-Store analysis.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-08-25 13:06:48 +02:00
Pablo Neira Ayuso
6c89dac5b9 netfilter: ctnetlink: missing counters and timestamp in nfnetlink_{log,queue}
Add counters and timestamps (if available) to the conntrack object
that is represented in nfnetlink_log and _queue messages.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-08-25 13:06:48 +02:00
Nithin Dabilpuram
1c74b89171 octeontx2-af: Wait for TX link idle for credits change
NIX_AF_TX_LINKX_NORM_CREDIT holds running counter of
tx credits available per link. But, tx credits should be
configured based on MTU config. So MTU change needs tx
credit count update.

An issue exists whereby when both PF & VF are enabled and
PF traffic is flowing, if VF requests for MTU update,
updating the NORM_CREDIT register will lead to corruption
of credit count and subsequent deadlock of tx link as
the NORM_CREDIT register holds running count.

This patch provides workaround by pausing link traffic
using NIX_AF_TL1X_SW_XOFF, waiting for existing packets to
drain, and used credits be returned before updating new
credit count.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25 12:05:54 +01:00
Nithin Dabilpuram
906999c9b6 octeontx2-af: Change the order of queue work and interrupt disable
Clear and disable interrupt before queueing work as there might be
a chance that work gets completed on other core faster and
interrupt enable as a part of the work completes before
interrupt disable in the interrupt context. This leads to
permanent disable of interrupt.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25 12:05:54 +01:00
Geetha sowjanya
ae2c341eb0 octeontx2-af: cn10k: Set cache lines for NPA batch alloc
Set NPA batch allocation engine to process 35 cache lines
per turn on CN10k platform.

Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25 12:04:34 +01:00
Florian Westphal
bd1431db0b netfilter: ecache: remove nf_exp_event_notifier structure
Reuse the conntrack event notofier struct, this allows to remove the
extra register/unregister functions and avoids a pointer in struct net.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-08-25 12:50:38 +02:00
Florian Westphal
b86c0e6429 netfilter: ecache: prepare for event notifier merge
This prepares for merge for ct and exp notifier structs.

The 'fcn' member is renamed to something unique.
Second, the register/unregister api is simplified.  There is only
one implementation so there is no need to do any error checking.

Replace the EBUSY logic with WARN_ON_ONCE.  This allows to remove
error unwinding.

The exp notifier register/unregister function is removed in
a followup patch.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-08-25 12:50:38 +02:00
Florian Westphal
b3afdc1758 netfilter: ecache: add common helper for nf_conntrack_eventmask_report
nf_ct_deliver_cached_events and nf_conntrack_eventmask_report are very
similar.  Split nf_conntrack_eventmask_report into a common helper
function that can be used for both cases.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-08-25 12:50:38 +02:00
Florian Westphal
9291f0902d netfilter: ecache: remove another indent level
... by changing:

if (unlikely(ret < 0 || missed)) {
	if (ret < 0) {
to
if (likely(ret >= 0 && !missed))
	goto out;

if (ret < 0) {

After this nf_conntrack_eventmask_report and nf_ct_deliver_cached_events
look pretty much the same, next patch moves common code to a helper.

This patch has no effect on generated code.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-08-25 12:50:38 +02:00
Florian Westphal
478374a3c1 netfilter: ecache: remove one indent level
nf_conntrack_eventmask_report and nf_ct_deliver_cached_events shared
most of their code.  This unifies the layout by changing

 if (nf_ct_is_confirmed(ct)) {
   foo
 }

 to
 if (!nf_ct_is_confirmed(ct)))
   return
 foo

This removes one level of indentation.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-08-25 12:50:38 +02:00
Will Deacon
3eb9cdffb3 Partially revert "arm64/mm: drop HAVE_ARCH_PFN_VALID"
This partially reverts commit 16c9afc776.

Alex Bee reports a regression in 5.14 on their RK3328 SoC when
configuring the PL330 DMA controller:

 | ------------[ cut here ]------------
 | WARNING: CPU: 2 PID: 373 at kernel/dma/mapping.c:235 dma_map_resource+0x68/0xc0
 | Modules linked in: spi_rockchip(+) fuse
 | CPU: 2 PID: 373 Comm: systemd-udevd Not tainted 5.14.0-rc7 #1
 | Hardware name: Pine64 Rock64 (DT)
 | pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
 | pc : dma_map_resource+0x68/0xc0
 | lr : pl330_prep_slave_fifo+0x78/0xd0

This appears to be because dma_map_resource() is being called for a
physical address which does not correspond to a memory address yet does
have a valid 'struct page' due to the way in which the vmemmap is
constructed.

Prior to 16c9afc776 ("arm64/mm: drop HAVE_ARCH_PFN_VALID"), the arm64
implementation of pfn_valid() called memblock_is_memory() to return
'false' for such regions and the DMA mapping request would proceed.
However, now that we are using the generic implementation where only the
presence of the memory map entry is considered, we return 'true' and
erroneously fail with DMA_MAPPING_ERROR because we identify the region
as DRAM.

Although fixing this in the DMA mapping code is arguably the right fix,
it is a risky, cross-architecture change at this stage in the cycle. So
just revert arm64 back to its old pfn_valid() implementation for v5.14.
The change to the generic pfn_valid() code is preserved from the original
patch, so as to avoid impacting other architectures.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Reported-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/d3a3c828-b777-faf8-e901-904995688437@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-08-25 11:33:24 +01:00
Shaokun Zhang
87e5ef4b19 mctp: Remove the repeated declaration
Function 'mctp_dev_get_rtnl' is declared twice, so remove the
repeated declaration.

Cc: Jeremy Kerr <jk@codeconstruct.com.au>
Cc: Matt Johnston <matt@codeconstruct.com.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25 11:23:14 +01:00