Stop the initialization when cpumask allocation failed and return an
error.
Fixes: 80a064dbd5 ("scmi-cpufreq: Get opp_shared_cpus from opp-v2 for EM")
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This WARN can be triggered per-core and the stack trace is not useful.
Replace it with plain dev_err(). Fix a comment while at it.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This whitelists the FPU register state portion of the thread_struct for
copying to userspace, instead of the default entire struct.
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
FPU_STATUS register contains FP exception flags bits which are updated
by core as side-effect of FP instructions but can also be manually
wiggled such as by glibc C99 functions fe{raise,clear,test}except() etc.
To effect the update, the programming model requires OR'ing FWE
bit (31). This bit is write-only and RAZ, meaning it is effectively
auto-cleared after write and thus needs to be set everytime: which
is how glibc implements this.
However there's another usecase of FPU_STATUS update, at the time of
Linux task switch when incoming task value needs to be programmed into
the register. This was added as part of f45ba2bd6d ("ARCv2:
fpu: preserve userspace fpu state") which missed OR'ing FWE bit,
meaning the new value is effectively not being written at all.
This patch remedies that.
Interestingly, this snafu was not caught in interm glibc testing as the
race window which relies on a specific exception bit to be set/clear is
really small specially when it nvolves context switch.
Fortunately this was caught by glibc's math/test-fenv-tls test which
repeatedly set/clear exception flags in a big loop, concurrently in main
program and also in a thread.
Fixes: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/54
Fixes: f45ba2bd6d ("ARCv2: fpu: preserve userspace fpu state")
Cc: stable@vger.kernel.org #5.6+
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Enabling CONFIG_STACKDEPOT results in the following build error.
arc-elf-ld: lib/stackdepot.o: in function `filter_irq_stacks':
stackdepot.c:(.text+0x456): undefined reference to `__irqentry_text_start'
arc-elf-ld: stackdepot.c:(.text+0x456): undefined reference to `__irqentry_text_start'
arc-elf-ld: stackdepot.c:(.text+0x476): undefined reference to `__irqentry_text_end'
arc-elf-ld: stackdepot.c:(.text+0x476): undefined reference to `__irqentry_text_end'
arc-elf-ld: stackdepot.c:(.text+0x484): undefined reference to `__softirqentry_text_start'
arc-elf-ld: stackdepot.c:(.text+0x484): undefined reference to `__softirqentry_text_start'
arc-elf-ld: stackdepot.c:(.text+0x48c): undefined reference to `__softirqentry_text_end'
arc-elf-ld: stackdepot.c:(.text+0x48c): undefined reference to `__softirqentry_text_end'
Other architectures address this problem by adding IRQENTRY_TEXT and
SOFTIRQENTRY_TEXT to the text segment, so do the same here.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
There is a spelling mistake and incorrect grammar in the Kconfig
text. Fix them.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Fix checkpatch warnings:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
Signed-off-by: Jinchao Wang <wjc@cdjrlc.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
During f2fs_write_checkpoint(), once we failed in
f2fs_flush_nat_entries() or do_checkpoint(), metadata of filesystem
such as prefree bitmap, nat/sit version bitmap won't be recovered,
it may cause f2fs image to be inconsistent, let's just set CP error
flag to avoid further updates until we figure out a scheme to rollback
all metadatas in such condition.
Reported-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If an interrupt is taken in kernel mode, always use SIAR for it rather than
looking at regs_sipr. This prevents samples piling up around interrupt
enable (hard enable or interrupt replay via soft enable) in PMUs / modes
where the PR sample indication is not in synch with SIAR.
This results in better sampling of interrupt entry and exit in particular.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210720141504.420110-1-npiggin@gmail.com
On POWER10 systems, the "ibm,thread-groups" property "2" indicates the cpus
in thread-group share both L2 and L3 caches. Hence, use cache_property = 2
itself to find both the L2 and L3 cache siblings.
Hence, create a new thread_group_l3_cache_map to keep list of L3 siblings,
but fill the mask using same property "2" array.
Signed-off-by: Parth Shah <parth@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210728175607.591679-4-parth@linux.ibm.com
The helper function get_shared_cpu_map() was added in
'commit 500fe5f550 ("powerpc/cacheinfo: Report the correct
shared_cpu_map on big-cores")'
and subsequently expanded upon in
'commit 0be47634db ("powerpc/cacheinfo: Print correct cache-sibling
map/list for L2 cache")'
in order to help report the correct groups of threads sharing these caches
on big-core systems where groups of threads within a core can share
different sets of caches.
Now that powerpc/cacheinfo is aware of "ibm,thread-groups" property,
cache->shared_cpu_map contains the correct set of thread-siblings
sharing the cache. Hence we no longer need the functions
get_shared_cpu_map(). This patch removes this function. We also remove
the helper function index_dir_to_cpu() which was only called by
get_shared_cpu_map().
With these functions removed, we can still see the correct
cache-sibling map/list for L1 and L2 caches on systems with L1 and L2
caches distributed among groups of threads in a core.
With this patch, on a SMT8 POWER10 system where the L1 and L2 caches
are split between the two groups of threads in a core, for CPUs 8,9,
the L1-Data, L1-Instruction, L2, L3 cache CPU sibling list is as
follows:
$ grep . /sys/devices/system/cpu/cpu[89]/cache/index[0123]/shared_cpu_list
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list:8,10,12,14
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list:8,10,12,14
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list:8,10,12,14
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list:8-15
/sys/devices/system/cpu/cpu9/cache/index0/shared_cpu_list:9,11,13,15
/sys/devices/system/cpu/cpu9/cache/index1/shared_cpu_list:9,11,13,15
/sys/devices/system/cpu/cpu9/cache/index2/shared_cpu_list:9,11,13,15
/sys/devices/system/cpu/cpu9/cache/index3/shared_cpu_list:8-15
$ ppc64_cpu --smt=4
$ grep . /sys/devices/system/cpu/cpu[89]/cache/index[0123]/shared_cpu_list
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list:8,10
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list:8,10
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list:8,10
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list:8-11
/sys/devices/system/cpu/cpu9/cache/index0/shared_cpu_list:9,11
/sys/devices/system/cpu/cpu9/cache/index1/shared_cpu_list:9,11
/sys/devices/system/cpu/cpu9/cache/index2/shared_cpu_list:9,11
/sys/devices/system/cpu/cpu9/cache/index3/shared_cpu_list:8-11
$ ppc64_cpu --smt=2
$ grep . /sys/devices/system/cpu/cpu[89]/cache/index[0123]/shared_cpu_list
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list:8
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list:8
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list:8
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list:8-9
/sys/devices/system/cpu/cpu9/cache/index0/shared_cpu_list:9
/sys/devices/system/cpu/cpu9/cache/index1/shared_cpu_list:9
/sys/devices/system/cpu/cpu9/cache/index2/shared_cpu_list:9
/sys/devices/system/cpu/cpu9/cache/index3/shared_cpu_list:8-9
$ ppc64_cpu --smt=1
$ grep . /sys/devices/system/cpu/cpu[89]/cache/index[0123]/shared_cpu_list
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list:8
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list:8
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list:8
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list:8
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210728175607.591679-3-parth@linux.ibm.com
Currently the cacheinfo code on powerpc indexes the "cache" objects
(modelling the L1/L2/L3 caches) where the key is device-tree node
corresponding to that cache. On some of the POWER server platforms
thread-groups within the core share different sets of caches (Eg: On
SMT8 POWER9 systems, threads 0,2,4,6 of a core share L1 cache and
threads 1,3,5,7 of the same core share another L1 cache). On such
platforms, there is a single device-tree node corresponding to that
cache and the cache-configuration within the threads of the core is
indicated via "ibm,thread-groups" device-tree property.
Since the current code is not aware of the "ibm,thread-groups"
property, on the aforementoined systems, cacheinfo code still treats
all the threads in the core to be sharing the cache because of the
single device-tree node (In the earlier example, the cacheinfo code
would says CPUs 0-7 share L1 cache).
In this patch, we make the powerpc cacheinfo code aware of the
"ibm,thread-groups" property. We indexe the "cache" objects by the
key-pair (device-tree node, thread-group id). For any CPUX, for a
given level of cache, the thread-group id is defined to be the first
CPU in the "ibm,thread-groups" cache-group containing CPUX. For levels
of cache which are not represented in "ibm,thread-groups" property,
the thread-group id is -1.
[parth: Remove "static" keyword for the definition of "thread_group_l1_cache_map"
and "thread_group_l2_cache_map" to get rid of the compile error.]
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Parth Shah <parth@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210728175607.591679-2-parth@linux.ibm.com
Currently, the install target in arch/powerpc/Makefile descends into
arch/powerpc/boot/Makefile to invoke the shell script, but there is no
good reason to do so.
arch/powerpc/Makefile can run the shell script directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729141937.445051-3-masahiroy@kernel.org
The install target should not depend on any build artifact.
The reason is explained in commit 19514fc665 ("arm, kbuild: make
"make install" not depend on vmlinux").
Change the PowerPC installation code in a similar way.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729141937.445051-2-masahiroy@kernel.org
Commit c913e5f95e ("powerpc/boot: Don't install zImage.* from make
install") added the zInstall target to arch/powerpc/boot/Makefile,
but you cannot use it since the corresponding hook is missing in
arch/powerpc/Makefile.
It has never worked since its addition. Nobody has complained about
it for 7 years, which means this code was unneeded.
With this removal, the install.sh will be passed in with 4 parameters.
Simplify the shell script.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729141937.445051-1-masahiroy@kernel.org
After commit 7cbd631d4dec ("cpuidle: pseries: Fixup CEDE0 latency only
for POWER10 onwards"), pseries_idle_probe() is no longer inlined when
compiling with clang, which causes a modpost warning:
WARNING: modpost: vmlinux.o(.text+0xc86a54): Section mismatch in
reference from the function pseries_idle_probe() to the function
.init.text:fixup_cede0_latency()
The function pseries_idle_probe() references
the function __init fixup_cede0_latency().
This is often because pseries_idle_probe lacks a __init
annotation or the annotation of fixup_cede0_latency is wrong.
pseries_idle_probe() is a non-init function, which calls
fixup_cede0_latency(), which is an init function, explaining the
mismatch. pseries_idle_probe() is only called from
pseries_processor_idle_init(), which is an init function, so mark
pseries_idle_probe() as __init so there is no more warning.
Fixes: 054e44ba99 ("cpuidle: pseries: Add function to parse extended CEDE records")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210803211547.1093820-1-nathan@kernel.org
Add support for following boards:
- Xperia X Performance (dora)
- Xperia XZ (kagura)
- Xperia XZs (keyaki)
They are all based on the SONY Tone platform and feature largely similar hardware
with the most obvious differences being lack of USB-C and ToF sensor on Dora and
different camera sensor on Keyaki.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210608202143.247427-4-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Most phones ship without HDMI and leaving it enabled wrecks
havoc. Disable it in msm8996.dtsi and re-enable it on the boards
that did not disable it previously.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210608202143.247427-3-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add an overlay for MSM8996v3.0, which is a pre-final revision
of the said SoC. It has some stark differences with regards to
GPU, or more specifically its power delivery path. Oh, and of
course a different msm-id.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210608202143.247427-2-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
PMI8996 is *almost* the same hardware as PMI8994, say for some annoyances:
- Boards equipped with PMI8996 now have to include pmic-id (which wasn't the
case before)
- Different qpnp-ibb-discharge-resistor value (will be addressed after LABIBB
is introduced)
- Different inhibit-derating-ua value (will be addressed after BCL is
introduced)
- Different ramp_up_step value (will be addressed after [if?] QPNP Flash LED
is introduced)
This DTSI is supposed to be included >>ON TOP OF<< pmi8994.dtsi, like this:
-- msm8996-nice-device.dts --
\#include "pmi8994.dtsi"
\#include "pmi8996.dtsi"
or more likely like this:
-- msm8996-some-phone.dts --
\#include "msm8996.dtsi"
...
\#include "pmi8994.dtsi"
-- msm8996-pmi8996-some-phone.dts --
\#include "msm8996-some-phone.dts"
\#include "pmi8996.dtsi"
So that we only have to keep 2 DTs for devices that were shipped with both
ones, instead of what would be three (device base + pmi8994 + pmi8996)
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210608202143.247427-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Alderlake-P have different values for MBUS DBOX A credits depending
if MBUS join is enabled or not.
BSpec: 50343
BSpec: 54369
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708211827.288601-6-jose.souza@intel.com
This feature hands over the control of HW RC6 to the GuC.
GuC decides when to put HW into RC6 based on it's internal
busyness algorithms.
GuCRC needs GuC submission to be enabled, and only
supported on Gen12+ for now.
When GuCRC is enabled, do not set HW RC6. Use a H2G message
to tell GuC to enable GuCRC. When disabling RC6, tell GuC to
revert RC6 control back to KMD. KMD is still responsible for
enabling everything related to Coarse Power Gating though.
v2: Address comments (Michal W)
v3: Don't set hysterisis values when GuCRC is used (Matt Roper)
v4: checkpatch()
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-15-vinay.belgaumkar@intel.com
Tests that exercise the SLPC get/set frequency interfaces.
Clamp_max will set max frequency to multiple levels and check
that SLPC requests frequency lower than or equal to it.
Clamp_min will set min frequency to different levels and check
if SLPC requests are higher or equal to those levels.
v2: Address review comments (Michal W)
v3: Checkpatch() corrections
v4: Remove unnecessary header file (Matthew Brost)
v5: checkpatch() and define const for 50/3 (Matthew Brost)
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-14-vinay.belgaumkar@intel.com
Update the get/set min/max freq hooks to work for
SLPC case as well. Consolidate helpers for requested/min/max
frequency get/set to intel_rps where the proper action can
be taken depending on whether SLPC is enabled.
v2: Add wrappers for getting rp0/1/n frequencies, update
softlimits in set min/max SLPC functions. Also check for
boundary conditions before setting them.
v3: Address review comments (Michal W)
v4: Add helper for host part of intel_rps_set_freq helpers (Michal W)
v5: checkpatch()
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-13-vinay.belgaumkar@intel.com
Cache rp0, rp1 and rpn platform limits into SLPC structure
for range checking while setting min/max frequencies.
Also add "soft" limits which keep track of frequency changes
made from userland. These are initially set to platform min
and max.
v2: Address review comments (Michal W)
v3: Formatting (Michal W)
v4: Add separate function to parse rp values (Michal W)
v5: Perform range checking for set min/max (Michal W)
v6: checkpatch() and rename static functions (Michal W)
v7: check ret code while setting SLPC limits (Michal W)
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-12-vinay.belgaumkar@intel.com
This interrupt is enabled during RPS initialization, and
now needs to be done by SLPC code. It allows ARAT timer
expiry interrupts to get forwarded to GuC.
v2: Fix comment (Matthew Brost)
v3: checkpatch()
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-11-vinay.belgaumkar@intel.com
This prints out relevant SLPC info from the SLPC shared structure.
We will send a H2G message which forces SLPC to update the
shared data structure with latest information before reading it.
v2: Address review comments (Michal W)
v3: Remove unnecessary tasks from slpc_info (Michal W)
v4: Rename function to intel_guc_slpc_print_info() (Michal W)
v5: checkpatch()
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-10-vinay.belgaumkar@intel.com
Add helpers to read the min/max frequency being used
by SLPC. This is done by send a H2G command which forces
SLPC to update the shared data struct which can then be
read. These helpers will be used in a sysfs patch later
on.
v2: Address review comments (Michal W)
v3: Return err in case of query failure (Michal W)
v4: Move decode_min/max_freq to this patch
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-9-vinay.belgaumkar@intel.com
Add param set h2g helpers to set the min and max frequencies
for use by SLPC.
v2: Address review comments (Michal W)
v3: Check for positive error code (Michal W)
v4: Print generic error in set_param (Michal W)
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-8-vinay.belgaumkar@intel.com
The assumption when it was added was that GT would not be
holding any gt_pm references. However, uc_init is called
from gt_init_hw, which holds a forcewake ref. If SLPC
enable fails, we will still be holding this ref, which will
result in the BUG_ON.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-7-vinay.belgaumkar@intel.com
Add methods for interacting with GuC for enabling SLPC. Enable
SLPC after GuC submission has been established. GuC load will
fail if SLPC cannot be successfully initialized. Add various
helper methods to set/unset the parameters for SLPC. They can
be set using H2G calls or directly setting bits in the shared
data structure.
v2: Address several review comments, add new helpers for
decoding the SLPC min/max frequencies. Use masks instead of hardcoded
constants. (Michal W)
v3: Split global_state_to_string function, and check for positive
non-zero return value from intel_guc_send() (Michal W)
v4: Optimize the stringify function and other comments (Michal W)
v5: Enable slpc as well before declaring GuC submission status (Michal W)
v6: Checkpatch()
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-6-vinay.belgaumkar@intel.com
Allocate data structures for SLPC and functions for
initializing on host side.
v2: Address review comments (Michal W)
v3: Remove unnecessary header includes (Michal W)
v4: Rebase
v5: Move allocation of shared data into slpc_init() (Michal W)
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-5-vinay.belgaumkar@intel.com
Add constants and params that are needed to configure SLPC.
v2: Add a new abi header for SLPC. Replace bitfields with
genmasks. Address other comments from Michal W.
v3: Add slpc H2G format in abi, other review commments (Michal W)
v4: Update status bits according to latest spec
v5: checkpatch()
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-4-vinay.belgaumkar@intel.com
Also ensure uc_init is called before we initialize RPS so that we
can check for SLPC support. We do not need to enable up/down
interrupts when SLPC is enabled. However, we still need the ARAT
interrupt, which will be enabled separately later.
v2: Explicitly return from intel_rps_enable with slpc check (Matthew B)
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-3-vinay.belgaumkar@intel.com
Add macros to check for SLPC support. This feature is currently supported
for Gen12+ and enabled whenever GuC submission is enabled/selected.
Include templates for SLPC init/fini and enable.
v2: Move SLPC helper functions to intel_guc_slpc.c/.h. Define
basic template for SLPC structure in intel_guc_slpc_types.h.
Fix copyright (Michal W)
v3: Review comments (Michal W)
v4: Include supported/selected inside slpc struct (Michal W)
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-2-vinay.belgaumkar@intel.com
Let's delete the private function cpr_read_efuse() since it does the
basically the same thing as the new API call
nvmem_cell_read_variable_le_u32().
Differences between the new API call and the old private function:
* less error printing (I assume this is OK).
* will give an error if the value doesn't fit in 32-bits (the old code
would have truncated silently).
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Niklas Cassel <nks@flawful.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210521134437.v2.1.Id1c70158722750aec0673d60c12e46a9c66bbfed@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This series series of patches converts ep93xx to Common Clock Framework.
It consists of preparation patches to use clk_prepare_enable where it is
needed, instead of clk_enable used in ep93xx drivers prior to CCF and
a patch converting mach-ep93xx/clock.c to CCF.
Link: https://lore.kernel.org/patchwork/cover/1445563/
Link: https://lore.kernel.org/patchwork/patch/1435884/
v1->v2:
- added SoB
Alexander Sverdlin (7):
iio: ep93xx: Prepare clock before using it
spi: spi-ep93xx: Prepare clock before using it
Input: ep93xx_keypad: Prepare clock before using it
video: ep93xx: Prepare clock before using it
dmaengine: ep93xx: Prepare clock before using it
ASoC: cirrus: i2s: Prepare clock before using it
pwm: ep93xx: Prepare clock before using it
Nikita Shubin (1):
ep93xx: clock: convert in-place to COMMON_CLK
arch/arm/Kconfig | 2 +-
arch/arm/mach-ep93xx/clock.c | 975 ++++++++++++++-----------
arch/arm/mach-ep93xx/core.c | 2 +-
arch/arm/mach-ep93xx/soc.h | 42 +-
drivers/dma/ep93xx_dma.c | 6 +-
drivers/iio/adc/ep93xx_adc.c | 6 +-
drivers/input/keyboard/ep93xx_keypad.c | 4 +-
drivers/pwm/pwm-ep93xx.c | 12 +-
drivers/spi/spi-ep93xx.c | 4 +-
drivers/video/fbdev/ep93xx-fb.c | 4 +-
sound/soc/cirrus/ep93xx-i2s.c | 12 +-
11 files changed, 605 insertions(+), 464 deletions(-)
base-commit: 64376a981a
--
2.26.2
Hi Mark
Now I'm posting audio-graph-card2 patch-set, but it seems it needs longer
discussion. Thus I want to post more easy patch first, and reduce my
local patches.
These are cppcheck warning cleanup patches for soc-ops.
Kuninori Morimoto (4):
ASoC: soc-ops: cleanup cppcheck warning at snd_soc_put_volsw_sx()
ASoC: soc-ops: cleanup cppcheck warning at snd_soc_limit_volume()
ASoC: soc-ops: cleanup cppcheck warning at snd_soc_get_xr_sx()
ASoC: soc-ops: cleanup cppcheck warning at snd_soc_put_xr_sx()
sound/soc/soc-ops.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
--
2.25.1
Some 2-in-1s with a detachable (USB) keyboard(dock) have mute-LEDs in
the speaker- and/or mic-mute keys on the keyboard.
Examples of this are the Lenovo Thinkpad10 tablet (with its USB kbd-dock)
and the HP x2 10 series.
The detachable nature of these keyboards means that the keyboard and
thus the mute LEDs may show up after the user (or userspace restoring
old mixer settings) has muted the speaker and/or mic.
Current LED-class devices with a default_trigger of "audio-mute" or
"audio-micmute" initialize the brightness member of led_classdev with
ledtrig_audio_get() before registering the LED.
This makes the software state after attaching the keyboard match the
actual audio mute state, e.g. cat /sys/class/leds/foo/brightness will
show the right value.
But before this commit nothing was actually calling the led_classdev's
brightness_set[_blocking] callback so the value returned by
ledtrig_audio_get() was never actually being sent to the hw, leading
to the mute LEDs staying in their default power-on state, after
attaching the keyboard, even if ledtrig_audio_get() returned a different
state.
This could be fixed by having the individual LED drivers call
brightness_set[_blocking] themselves after registering the LED,
but this really is something which should be done by a led-trigger
activate callback.
Add an activate callback for this, fixing the issue of the
mute LEDs being out of sync after (re)attaching the keyboard.
Cc: Takashi Iwai <tiwai@suse.de>
Fixes: faa2541f5b ("leds: trigger: Introduce audio mute LED trigger")
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Change pciconfig_read() syscall "err" return value from long to int. This
makes it consistent with pciconfig_write().
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20210729233755.1509616-2-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The pciconfig_read() syscall reads PCI configuration space using
hardware-dependent config accessors.
If the read fails on PCI, most accessors don't return an error; they
pretend the read was successful and got ~0 data from the device, so the
syscall returns success with ~0 data in the buffer.
When the accessor does return an error, pciconfig_read() normally fills the
user's buffer with ~0 and returns an error in errno. But after
e4585da22a ("pci syscall.c: Switch to refcounting API"), we don't fill
the buffer with ~0 for the EPERM "user lacks CAP_SYS_ADMIN" error.
Userspace may rely on the ~0 data to detect errors, but after e4585da22a,
that would not detect CAP_SYS_ADMIN errors.
Restore the original behaviour of filling the buffer with ~0 when the
CAP_SYS_ADMIN check fails.
[bhelgaas: commit log, fold in Nathan's fix
https://lore.kernel.org/r/20210803200836.500658-1-nathan@kernel.org]
Fixes: e4585da22a ("pci syscall.c: Switch to refcounting API")
Link: https://lore.kernel.org/r/20210729233755.1509616-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
fwnode_get_next_available_child_node() bumps a reference counting of
a returned variable. We have to balance it whenever we return to
the caller.
Fixes: e1c6edcbea ("leds: rt8515: Add Richtek RT8515 LED driver")
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
device_get_next_child_node() bumps a reference counting of a returned variable.
We have to balance it whenever we return to the caller.
Fixes: 8cd7d6daba ("leds: lt3593: Add device tree probing glue")
Cc: Daniel Mack <daniel@zonque.org>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
It's easy to miss necessary clean up, e.g. firmware node reference counting,
during error path in ->probe(). Make it more robust by moving to a single
point of return.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Currently the headers to be included look rather like a random set.
Update them a bit to reflect the reality.
While at it, drop unneeded dependcy to OF.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
There is no user of of*.h headers, but mod_devicetable.h.
Update header block accordingly.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Convert to use list_for_each_entry*() API insted of open coded variants.
It saves few lines of code and makes iteasier to read and maintain.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>