pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced.
Fixes: 4f3ceca254 ("dmaengine: stm32-dmamux: Add PM Runtime support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20210607064640.121394-3-zhangqilong3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced.
Fixes: 48bc73ba14 ("dmaengine: stm32-dma: Add PM Runtime support")
Fixes: 05f8740a0e ("dmaengine: stm32-dma: add suspend/resume power management support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20210607064640.121394-2-zhangqilong3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
SET_IDLE value must be shifted 8 bits to the right to get duration.
This confirmed by USBCV test.
Fixes: afcff6dc69 ("usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlers")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Maxim Devaev <mdevaev@gmail.com>
Link: https://lore.kernel.org/r/20210727185800.43796-1-mdevaev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ADL_P requires that we disable underrun recovery when downscaling (or
using the scaler for YUV420 pipe output), using DSC, or using PSR2.
Otherwise we should be able to enable the underrun recovery.
On DG2 we need to keep underrun recovery disabled at all times, but the
chicken bit in PIPE_CHICKEN has an inverted meaning (it's an enable bit
instead of disable).
v2:
- Reverse the condition (clear the disable bit when supported, set
disable bit when not supported).
Bspec: 50351
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727145056.2049720-1-matthew.d.roper@intel.com
blkdev_get_no_open acquires a reference to the block_device through
the block device inode and then tries to acquire a device model
reference to the gendisk. But at this point the disk migh already
be freed (although the race is free). Fix this by only freeing the
gendisk from the whole device bdevs ->free_inode callback as well.
Fixes: 22ae8ce8b8 ("block: simplify bdev/disk lookup in blkdev_get")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210722075402.983367-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Last change to device managed APIs cleaned up error path to simple phy_exit()
call, which in some cases has been executed with NULL parameter. This per se
is not a problem, but rather logical misconception: no need to free resource
when it's for sure has not been allocated yet. Fix the driver accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210727125130.19977-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
iocg_wake_fn() open-codes wait_queue_entry removal and wakeup because it
wants the wq_entry to be always removed whether it ended up waking the
task or not. finish_wait() tests whether wq_entry needs removal without
grabbing the wait_queue lock and expects the waker to use
list_del_init_careful() after all waking operations are complete, which
iocg_wake_fn() didn't do. The operation order was wrong and the regular
list_del_init() was used.
The result is that if a waiter wakes up racing the waker, it can free pop
the wq_entry off stack before the waker is still looking at it, which can
lead to a backtrace like the following.
[7312084.588951] general protection fault, probably for non-canonical address 0x586bf4005b2b88: 0000 [#1] SMP
...
[7312084.647079] RIP: 0010:queued_spin_lock_slowpath+0x171/0x1b0
...
[7312084.858314] Call Trace:
[7312084.863548] _raw_spin_lock_irqsave+0x22/0x30
[7312084.872605] try_to_wake_up+0x4c/0x4f0
[7312084.880444] iocg_wake_fn+0x71/0x80
[7312084.887763] __wake_up_common+0x71/0x140
[7312084.895951] iocg_kick_waitq+0xe8/0x2b0
[7312084.903964] ioc_rqos_throttle+0x275/0x650
[7312084.922423] __rq_qos_throttle+0x20/0x30
[7312084.930608] blk_mq_make_request+0x120/0x650
[7312084.939490] generic_make_request+0xca/0x310
[7312084.957600] submit_bio+0x173/0x200
[7312084.981806] swap_readpage+0x15c/0x240
[7312084.989646] read_swap_cache_async+0x58/0x60
[7312084.998527] swap_cluster_readahead+0x201/0x320
[7312085.023432] swapin_readahead+0x2df/0x450
[7312085.040672] do_swap_page+0x52f/0x820
[7312085.058259] handle_mm_fault+0xa16/0x1420
[7312085.066620] do_page_fault+0x2c6/0x5c0
[7312085.074459] page_fault+0x2f/0x40
Fix it by switching to list_del_init_careful() and putting it at the end.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Rik van Riel <riel@surriel.com>
Fixes: 7caa47151a ("blkcg: implement blk-iocost")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The GPIO is used to place the BMC-connected TPM in reset.
The net is called BMC_TPM_RST_N on Tacoma.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210727033319.473152-3-joel@jms.id.au
The GPIO is used to place the BMC-connected TPM in reset. This state is
latched until the BMC is next reset, blocking access to the TPM for that
boot.
On both machines this net is called TPM_RESET_LATCH_B.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210727033319.473152-2-joel@jms.id.au
In the next patch, we start having more than a single potential failure
reason.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210728010632.2633470-9-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Previously the (non-fd) fence returned from submit ioctl was a raw
seqno, which is scoped to the ring. But from UABI standpoint, the
ioctls related to seqno fences all specify a submitqueue. We can
take advantage of that to replace the seqno fences with a cyclic idr
handle.
This is in preperation for moving to drm scheduler, at which point
the submit ioctl will return after queuing the submit job to the
scheduler, but before the submit is written into the ring (and
therefore before a ring seqno has been assigned). Which means we
need to replace the dma_fence that userspace may need to wait on
with a scheduler fence.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210728010632.2633470-8-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Move all the locked/active/pinned state handling to msm_gem_submit.c.
In particular, for drm/scheduler, we'll need to do all this before
pushing the submit job to the scheduler. But while we're at it we can
get rid of the dupicate pin and refcnt.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210728010632.2633470-7-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Now that no one is using it, remove it.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20210728010632.2633470-5-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
No idea why we were still using this. It certainly hasn't been needed
for some time. So drop the pointless twin codepaths.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210728010632.2633470-4-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
If we don't have a gpu, there is no need to create a submitqueue, which
lets us simplify the error handling and submitqueue creation.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210728010632.2633470-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fix a couple incorrect or misspelt comments, and add submitqueue doc
comment.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210728010632.2633470-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
This adds a few things to try and make frequency scaling better match
the workload:
1) Longer polling interval to avoid whip-lashing between too-high and
too-low frequencies in certain workloads, like mobile games which
throttle themselves to 30fps.
Previously our polling interval was short enough to let things
ramp down to minimum freq in the "off" frame, but long enough to
not react quickly enough when rendering started on the next frame,
leading to uneven frame times. (Ie. rather than a consistent 33ms
it would alternate between 16/33/48ms.)
2) Awareness of when the GPU is active vs idle. Since we know when
the GPU is active vs idle, we can clamp the frequency down to the
minimum while it is idle. (If it is idle for long enough, then
the autosuspend delay will eventually kick in and power down the
GPU.)
Since devfreq has no knowledge of powered-but-idle, this takes a
small bit of trickery to maintain a "fake" frequency while idle.
This, combined with the longer polling period allows devfreq to
arrive at a reasonable "active" frequency, while still clamping
to minimum freq when idle to reduce power draw.
3) Boost. Because simple_ondemand needs to see a certain threshold
of busyness to ramp up, we could end up needing multiple polling
cycles before it reacts appropriately on interactive workloads
(ex. scrolling a web page after reading for some time), on top
of the already lengthened polling interval, when we see a idle
to active transition after a period of idle time we boost the
frequency that we return to.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210726144653.2180096-4-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
In the next patch, it grows a bit more, so lets not duplicate the logic
in multiple places.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210726144653.2180096-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Before we start adding more cleverness, split it into it's own file.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210726144653.2180096-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Nothing we do to in update_fences() can't be done in an atomic context,
so move this into the GPU's irq context to reduce latency (and call
dma_fence_signal() so we aren't relying on dma_fence_is_signaled() which
would defeat the purpose).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210726144359.2179302-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Let dma_fence::signaled, etc, read directly from the address that the hw
is writing with updated completed fence seqno, so we can potentially
notice that the fence is signaled sooner.
Plus add some docs.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210726144359.2179302-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Unblock GuC submission on Gen11+ platforms.
v2:
(Martin Peres / John H)
- Delete debug message when GuC is disabled by default on certain
platforms
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-34-matthew.brost@intel.com
Implement a simple static mapping algorithm of the i915 priority levels
(int, -1k to 1k exposed to user) to the 4 GuC levels. Mapping is as
follows:
i915 level < 0 -> GuC low level (3)
i915 level == 0 -> GuC normal level (2)
i915 level < INT_MAX -> GuC high level (1)
i915 level == INT_MAX -> GuC highest level (0)
We believe this mapping should cover the UMD use cases (3 distinct user
levels + 1 kernel level).
In addition to static mapping, a simple counter system is attached to
each context tracking the number of requests inflight on the context at
each level. This is needed as the GuC levels are per context while in
the i915 levels are per request.
v2:
(Daniele)
- Add BUILD_BUG_ON to enforce ordering of priority levels
- Add missing lockdep to guc_prio_fini
- Check for return before setting context registered flag
- Map DISPLAY priority or higher to highest guc prio
- Update comment for guc_prio
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-33-matthew.brost@intel.com
Some testing environments and some heavier tests are slower than
previous limits allowed for. For example, it can take multiple seconds
for the 'context has been reset' notification handler to reach the
'kill the requests' code in the 'active' version of the 'reset
engines' test. During which time the selftest gets bored, gives up
waiting and fails the test.
There is also an async thread that the selftest uses to pump work
through the hardware in parallel to the context that is marked for
reset. That also could get bored waiting for completions and kill the
test off.
Lastly, the flush at the of various test sections can also see
timeouts due to the large amount of work backed up. This is also true
of the live_hwsp_read test.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-32-matthew.brost@intel.com
When GuC submission is enabled, the GuC controls engine resets. Rather
than explicitly triggering a reset, the driver must submit a hanging
context to GuC and wait for the reset to occur.
Conversely, one of the tests specifically sends hanging batches to the
engines but wants them to sit around until a manual reset of the full
GT (including GuC itself). That means disabling GuC based engine
resets to prevent those from killing the hanging batch too soon. So,
add support to the scheduling policy helper for disabling resets as
well as making them quicker!
In GuC submission mode, the 'is engine idle' test basically turns into
'is engine PM wakelock held'. Independently, there is a heartbeat
disable helper function that the tests use. For unexplained reasons,
this acquires the engine wakelock before disabling the heartbeat and
only releases it when re-enabling the heartbeat. As one of the tests
tries to do a wait for idle in the middle of a heartbeat disabled
section, it is therefore guaranteed to always fail. Added a 'no_pm'
variant of the heartbeat helper that allows the engine to be asleep
while also having heartbeats disabled.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-31-matthew.brost@intel.com
When GuC submission is enabled, the GuC controls engine resets. Rather
than explicitly triggering a reset, the driver must submit a hanging
context to GuC and wait for the reset to occur.
Signed-off-by: Rahul Kumar Singh <rahul.kumar.singh@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-29-matthew.brost@intel.com
When GuC submission is enabled, the GuC controls engine resets. Rather
than explicitly triggering a reset, the driver must submit a hanging
context to GuC and wait for the reset to occur.
Signed-off-by: Rahul Kumar Singh <rahul.kumar.singh@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-28-matthew.brost@intel.com
There are many ways in which the hangcheck selftest can fail. Very few
of them actually printed an error message to say what happened. So,
fill in the missing messages.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-27-matthew.brost@intel.com
This adds GuC backend support for i915_request_cancel(), which in turn
makes CONFIG_DRM_I915_REQUEST_TIMEOUT work.
This implementation makes use of fence while there are likely simplier
options. A fence was chosen because of another feature coming soon
which requires a user to block on a context until scheduling is
disabled. In that case we return the fence to the user and the user can
wait on that fence.
v2:
(Daniele)
- A comment about locking the blocked incr / decr
- A comments about the use of the fence
- Update commit message explaining why fence
- Delete redundant check blocked count in unblock function
- Ring buffer implementation
- Comment about blocked in submission path
- Shorter rpm path
v3:
(Checkpatch)
- Fix typos in commit message
(Daniel)
- Rework to simplier locking structure in guc_context_block / unblock
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-26-matthew.brost@intel.com
When using GuC submission, if a context gets banned disable scheduling
and mark all inflight requests as complete.
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-25-matthew.brost@intel.com
The media watchdog mechanism involves GuC doing a silent reset and
continue of the hung context. This requires the i915 driver provide a
golden context to GuC in the ADS.
v2:
(Matthew Brost):
- Fix memory corruption in shmem_read
(John H)
- Use locals rather than defines for LR_* + SKIP_SIZE
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-24-matthew.brost@intel.com
Added the scheduling policy parameters to the 'guc_info' debugfs state
dump.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-23-matthew.brost@intel.com
Changing the reset module parameter has no effect on a running GuC.
The corresponding entry in the ADS must be updated and then the GuC
informed via a Host2GuC message.
The new debugfs interface to module parameters allows this to happen.
However, connecting the parameter data address back to anything useful
is messy. One option would be to pass a new private data structure
address through instead of just the parameter pointer. However, that
means having a new (and different) data structure for each parameter
and a new (and different) write function for each parameter. This
method keeps everything generic by instead using a string lookup on
the directory entry name.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-22-matthew.brost@intel.com
Use the official driver default scheduling policies for configuring
the GuC scheduler rather than a bunch of hardcoded values.
v2:
(Matthew Brost)
- Move I915_ENGINE_WANT_FORCED_PREEMPTION to later patch
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Jose Souza <jose.souza@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-21-matthew.brost@intel.com
In the case of a full GPU reset (e.g. because GuC has died or because
GuC's hang detection has been disabled), the driver can't rely on GuC
reporting the guilty context. Instead, the driver needs to scan all
active contexts and find one that is currently executing, as per the
execlist mode behaviour. In GuC mode, this scan is different to
execlist mode as the active request list is handled very differently.
Similarly, the request state dump in debugfs needs to be handled
differently when in GuC submission mode.
Also refactured some of the request scanning code to avoid duplication
across the multiple code paths that are now replicating it.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-20-matthew.brost@intel.com
We receive notification of an engine reset from GuC at its
completion. Meaning GuC has potentially cleared any HW state
we may have been interested in capturing. GuC resumes scheduling
on the engine post-reset, as the resets are meant to be transparent,
further muddling our error state.
There is ongoing work to define an API for a GuC debug state dump. The
suggestion for now is to manually disable FW initiated resets in cases
where debug state is needed.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-19-matthew.brost@intel.com
Clear the 'disable resets' flag to allow GuC to reset hung contexts
(detected via pre-emption timeout).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-18-matthew.brost@intel.com
It is impossible to seal all race conditions of resets occurring
concurrent to other operations. At least, not without introducing
excesive mutex locking. Instead, don't complain if it occurs. In
particular, don't complain if trying to send a H2G during a reset.
Whatever the H2G was about should get redone once the reset is over.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-17-matthew.brost@intel.com
The driver must provide GuC with a list of mmio registers
that should be saved/restored during a GuC-based engine reset.
Unfortunately, the list must be dynamically allocated as its size is
variable. That means the driver must generate the list twice - once to
work out the size and a second time to actually save it.
v2:
(Alan / CI)
- GEN7_GT_MODE -> GEN6_GT_MODE to fix WA selftest failure
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Fernando Pacheco <fernando.pacheco@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-16-matthew.brost@intel.com
The GuC can implement execution qunatums, detect hung contexts and
other such things but it requires the timer expired interrupt to do so.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
CC: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-15-matthew.brost@intel.com
GuC will notify the driver, via G2H, if it fails to
reset an engine. We recover by resorting to a full GPU
reset.
v2:
(John Harrison):
- s/drm_dbg/drm_err
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Fernando Pacheco <fernando.pacheco@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-14-matthew.brost@intel.com
GuC will issue a reset on detecting an engine hang and will notify
the driver via a G2H message. The driver will service the notification
by resetting the guilty context to a simple state or banning it
completely.
v2:
(John Harrison)
- Move msg[0] lookup after length check
v3:
(John Harrison)
- s/drm_dbg/drm_err
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-13-matthew.brost@intel.com
The new GuC interface introduces an MMIO H2G command,
INTEL_GUC_ACTION_RESET_CLIENT, which is used to implement suspend. This
MMIO tears down any active contexts generating a context reset G2H CTB
for each. Once that step completes the GuC tears down the CTB
channels. It is safe to suspend once this MMIO H2G command completes
and all G2H CTBs have been processed. In practice the i915 will likely
never receive a G2H as suspend should only be called after the GPU is
idle.
Resume is implemented in the same manner as before - simply reload the
GuC firmware and reinitialize everything (e.g. CTB channels, contexts,
etc..).
v2:
(Michel / John H)
- INTEL_GUC_ACTION_RESET_CLIENT 0x5B01 -> 0x5507
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-12-matthew.brost@intel.com
Add disable GuC interrupts to intel_guc_sanitize(). Part of this
requires moving the guc_*_interrupt wrapper function into header file
intel_guc.h.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-11-matthew.brost@intel.com
If submission is disabled by the backend for any reason, reset the GPU
immediately in the heartbeat code as the backend can't be reenabled
until the GPU is reset.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-10-matthew.brost@intel.com
Reset implementation for new GuC interface. This is the legacy reset
implementation which is called when the i915 owns the engine hang check.
Future patches will offload the engine hang check to GuC but we will
continue to maintain this legacy path as a fallback and this code path
is also required if the GuC dies.
With the new GuC interface it is not possible to reset individual
engines - it is only possible to reset the GPU entirely. This patch
forces an entire chip reset if any engine hangs.
v2:
(Michal)
- Check for -EPIPE rather than -EIO (CT deadlock/corrupt check)
v3:
(John H)
- Split into a series of smaller patches
v4:
(John H)
- Fix typo
- Add braces around if statements in reset code
v5:
(Checkpatch)
- Fix warnings
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <john.c.harrison@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-9-matthew.brost@intel.com