Commit graph

1,058,063 commits

Author SHA1 Message Date
Maxim Levitsky
f1577ab214 KVM: SVM: svm_set_vintr don't warn if AVIC is active but is about to be deactivated
It is possible for AVIC inhibit and AVIC active state to be mismatched.
Currently we disable AVIC right away on vCPU which started the AVIC inhibit
request thus this warning doesn't trigger but at least in theory,
if svm_set_vintr is called at the same time on multiple vCPUs,
the warning can happen.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210713142023.106183-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-27 16:59:00 -04:00
Christian Borntraeger
bb000f640e KVM: s390: restore old debugfs names
commit bc9e9e672d ("KVM: debugfs: Reuse binary stats descriptors")
did replace the old definitions with the binary ones. While doing that
it missed that some files are names different than the counters. This
is especially important for kvm_stat which does have special handling
for counters named instruction_*.

Fixes: commit bc9e9e672d ("KVM: debugfs: Reuse binary stats descriptors")
CC: Jing Zhang <jingzhangos@google.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20210726150108.5603-1-borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-27 16:59:00 -04:00
Paolo Bonzini
3fa5e8fd0a KVM: SVM: delay svm_vcpu_init_msrpm after svm->vmcb is initialized
Right now, svm_hv_vmcb_dirty_nested_enlightenments has an incorrect
dereference of vmcb->control.reserved_sw before the vmcb is checked
for being non-NULL.  The compiler is usually sinking the dereference
after the check; instead of doing this ourselves in the source,
ensure that svm_hv_vmcb_dirty_nested_enlightenments is only called
with a non-NULL VMCB.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Vineeth Pillai <viremana@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[Untested for now due to issues with my AMD machine. - Paolo]
2021-07-27 16:59:00 -04:00
David Matlack
c33e05d9b0 KVM: selftests: Introduce access_tracking_perf_test
This test measures the performance effects of KVM's access tracking.
Access tracking is driven by the MMU notifiers test_young, clear_young,
and clear_flush_young. These notifiers do not have a direct userspace
API, however the clear_young notifier can be triggered by marking a
pages as idle in /sys/kernel/mm/page_idle/bitmap. This test leverages
that mechanism to enable access tracking on guest memory.

To measure performance this test runs a VM with a configurable number of
vCPUs that each touch every page in disjoint regions of memory.
Performance is measured in the time it takes all vCPUs to finish
touching their predefined region.

Example invocation:

  $ ./access_tracking_perf_test -v 8
  Testing guest mode: PA-bits:ANY, VA-bits:48,  4K pages
  guest physical test memory offset: 0xffdfffff000

  Populating memory             : 1.337752570s
  Writing to populated memory   : 0.010177640s
  Reading from populated memory : 0.009548239s
  Mark memory idle              : 23.973131748s
  Writing to idle memory        : 0.063584496s
  Mark memory idle              : 24.924652964s
  Reading from idle memory      : 0.062042814s

Breaking down the results:

 * "Populating memory": The time it takes for all vCPUs to perform the
   first write to every page in their region.

 * "Writing to populated memory" / "Reading from populated memory": The
   time it takes for all vCPUs to write and read to every page in their
   region after it has been populated. This serves as a control for the
   later results.

 * "Mark memory idle": The time it takes for every vCPU to mark every
   page in their region as idle through page_idle.

 * "Writing to idle memory" / "Reading from idle memory": The time it
   takes for all vCPUs to write and read to every page in their region
   after it has been marked idle.

This test should be portable across architectures but it is only enabled
for x86_64 since that's all I have tested.

Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210713220957.3493520-7-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-27 16:59:00 -04:00
David Matlack
15b7b737de KVM: selftests: Fix missing break in dirty_log_perf_test arg parsing
There is a missing break statement which causes a fallthrough to the
next statement where optarg will be null and a segmentation fault will
be generated.

Fixes: 9e965bb75a ("KVM: selftests: Add backing src parameter to dirty_log_perf_test")
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210713220957.3493520-6-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-27 16:58:59 -04:00
Juergen Gross
76b4f357d0 x86/kvm: fix vcpu-id indexed array sizes
KVM_MAX_VCPU_ID is the maximum vcpu-id of a guest, and not the number
of vcpu-ids. Fix array indexed by vcpu-id to have KVM_MAX_VCPU_ID+1
elements.

Note that this is currently no real problem, as KVM_MAX_VCPU_ID is
an odd number, resulting in always enough padding being available at
the end of those arrays.

Nevertheless this should be fixed in order to avoid rare problems in
case someone is using an even number for KVM_MAX_VCPU_ID.

Signed-off-by: Juergen Gross <jgross@suse.com>
Message-Id: <20210701154105.23215-2-jgross@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-27 16:58:59 -04:00
Linus Torvalds
82d712f6d1 Merge branch 'for-5.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
 "Fix a use-after-free in allocation failure handling path"

* 'for-5.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: fix UAF in pwq_unbound_release_workfn()
2021-07-27 13:55:30 -07:00
José Roberto de Souza
84030adb9e drm/i915/display: Disable audio, DRRS and PSR before planes
HDMI and DisplayPort sequences states that audio and PSR should be
disabled before planes are disabled.
Not following it did not caused any problems up to Alderlake-P but
for this platform it causes underruns during the PSR2 disable
sequence.

Specification don't mention that DRRS should be disabled before planes
but it looks safer to switch back to the default refresh rate before
following with the rest of the pipe disable sequence.

BSpec: 49191
BSpec: 49190
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210726181559.80855-1-jose.souza@intel.com
2021-07-27 13:35:02 -07:00
David S. Miller
f34d922450 Merge branch 'ipa-interrupts'
Alex Elder says:

====================
net: ipa: IPA interrupt cleanup

The first patch in this series makes all IPA interrupt handling be
done in a threaded context.  The remaining ones refactor some code
to simplify that threaded handler function.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 21:02:21 +01:00
Alex Elder
176086d870 net: ipa: kill ipa_interrupt_process_all()
Now that ipa_isr_thread() is a simple wrapper that gets a clock
reference around ipa_interrupt_process_all(), get rid of the
called function and just open-code it in ipa_isr_thread().

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 21:02:06 +01:00
Alex Elder
fe6a327979 net: ipa: get rid of some unneeded IPA interrupt code
The pending IPA interrupts are checked by ipa_isr_thread(), and
interrupts are processed only if an enabled interrupt has a
condition pending.  But ipa_interrupt_process_all() now makes the
same check, so the one in ipa_isr_thread() can just be skipped.

Also in ipa_isr_thread(), any interrupt conditions pending which are
not enabled are cleared.  Here too, ipa_interrupt_process_all() now
clears such excess interrupt conditions, so ipa_isr_thread() doesn't
have to.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 21:02:06 +01:00
Alex Elder
e70e410f8e net: ipa: clear disabled IPA interrupt conditions
We ignore any IPA interrupt that has no handler.  If any interrupt
conditions without a handler exist when an IPA interrupt occurs,
clear those conditions.  Add a debug message to report which ones
are being cleared.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 21:02:06 +01:00
Alex Elder
937a0da432 net: ipa: make IPA interrupt handler threaded only
When the IPA interrupt handler runs, the IPA core clock must already
be operational, and the interconnect providing access by the AP to
IPA config space must be enabled too.

Currently we ensure this by taking a top-level "stay awake" IPA
clock reference, but that will soon go away.  In preparation for
that, move all handling for the IPA IRQ into the thread function.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 21:02:06 +01:00
Yufeng Mo
8373cd38a8 net: hns3: change the method of obtaining default ptp cycle
The ptp cycle is related to the hardware, so it may cause compatibility
issues if a fixed value is used in driver. Therefore, the method of
obtaining this value is changed to read from the register rather than
use a fixed value in driver.

Fixes: 0bf5eb7885 ("net: hns3: add support for PTP")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:59:32 +01:00
Pavel Skripkin
8ca34a13f7 net: cipso: fix warnings in netlbl_cipsov4_add_std
Syzbot reported warning in netlbl_cipsov4_add(). The
problem was in too big doi_def->map.std->lvl.local_size
passed to kcalloc(). Since this value comes from userpace there is
no need to warn if value is not correct.

The same problem may occur with other kcalloc() calls in
this function, so, I've added __GFP_NOWARN flag to all
kcalloc() calls there.

Reported-and-tested-by: syzbot+cdd51ee2e6b0b2e18c0d@syzkaller.appspotmail.com
Fixes: 96cb8e3313 ("[NetLabel]: CIPSOv4 and Unlabeled packet integration")
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:58:30 +01:00
David S. Miller
2f21be447b Merge branch 'ionic-next'
Shannon Nelson says:

====================
ionic: driver updates 27-July-2021

This is a collection of small driver updates for adding a couple of
small features and for a bit of code cleaning.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:15:31 +01:00
Marek Vasut
5e23c98178 drm: mxsfb: Clear FIFO_CLEAR bit
Make sure the FIFO_CLEAR bit is latched in when configuring the
controller, so that the FIFO is really cleared. And then clear
the FIFO_CLEAR bit, since it is not self-clearing.

Fixes: 45d59d7040 ("drm: Add new driver for MXSFB controller")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Abrecht <public@danielabrecht.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # i.Core MX8MM
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210620224946.189524-1-marex@denx.de
2021-07-27 21:15:24 +02:00
Marek Vasut
b776b0f00f drm: mxsfb: Use bus_format from the nearest bridge if present
In case there is a bridge connected to the LCDIF, use bus_format
from the bridge, otherwise behave as before and use bus_format
from the connector. This way, even if there are multiple bridges
in the display pipeline, the LCDIF will use the correct format.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Abrecht <public@danielabrecht.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210726194457.341696-1-marex@denx.de
2021-07-27 21:15:24 +02:00
Marek Vasut
9891cb5444 drm: mxsfb: Increase number of outstanding requests on V4 and newer HW
In case the DRAM is under high load, the MXSFB FIFO might underflow
and that causes visible artifacts. This could be triggered on i.MX8MM
using e.g. "$ memtester 128M" on a device with 1920x1080 panel. The
first "Stuck Address" test of the memtester will completely corrupt
the image on the panel and leave the MXSFB FIFO in odd state.

To avoid this underflow, increase number of outstanding requests to
DRAM from 2 to 16, which is the maximum. This mitigates the issue
and it can no longer be triggered.

Fixes: 45d59d7040 ("drm: Add new driver for MXSFB controller")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Abrecht <public@danielabrecht.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210620224759.189351-1-marex@denx.de
2021-07-27 21:15:24 +02:00
Marek Vasut
0c9856e4ed drm: mxsfb: Enable recovery on underflow
There is some sort of corner case behavior of the controller,
which could rarely be triggered at least on i.MX6SX connected
to 800x480 DPI panel and i.MX8MM connected to DPI->DSI->LVDS
bridged 1920x1080 panel (and likely on other setups too), where
the image on the panel shifts to the right and wraps around.
This happens either when the controller is enabled on boot or
even later during run time. The condition does not correct
itself automatically, i.e. the display image remains shifted.

It seems this problem is known and is due to sporadic underflows
of the LCDIF FIFO. While the LCDIF IP does have underflow/overflow
IRQs, neither of the IRQs trigger and neither IRQ status bit is
asserted when this condition occurs.

All known revisions of the LCDIF IP have CTRL1 RECOVER_ON_UNDERFLOW
bit, which is described in the reference manual since i.MX23 as
"
  Set this bit to enable the LCDIF block to recover in the next
  field/frame if there was an underflow in the current field/frame.
"
Enable this bit to mitigate the sporadic underflows.

Fixes: 45d59d7040 ("drm: Add new driver for MXSFB controller")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Abrecht <public@danielabrecht.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210620224701.189289-1-marex@denx.de
2021-07-27 21:15:24 +02:00
Shannon Nelson
18d6426402 ionic: add function tag to debug string
Prefix the log output with the function string as in other
debug messages.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:15:22 +01:00
Shannon Nelson
6edddead95 ionic: enable rxhash only with multiple queues
If there's only one queue, there is no need to enable
the rxhashing.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:15:22 +01:00
Shannon Nelson
f512368677 ionic: block some ethtool operations when fw in reset
There are a few things that we can't safely do when the fw is
resetting, as the driver may be in the middle of rebuilding
queue structures.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:15:22 +01:00
Shannon Nelson
a1cda1844b ionic: remove unneeded comp union fields
We don't use these fields, so remove them from
the definition.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:15:22 +01:00
Shannon Nelson
73618201ac ionic: increment num-vfs before configure
Add the new VF to our internal count before we start configuring it.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:15:21 +01:00
Shannon Nelson
e75ccac1d0 ionic: use fewer inits on the buf_info struct
Based on Alex's review notes on [1], we don't need to write
to the buf_info elements as often, and can tighten up how they
are used.  Also, use prefetchw() to warm up the page struct
for a later get_page().

[1] https://lore.kernel.org/netdev/CAKgT0UfyjoAN7LTnq0NMZfXRv4v7iTCPyAb9pVr3qWMhop_BVw@mail.gmail.com/

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:15:21 +01:00
Shannon Nelson
e7f52aa443 ionic: init reconfig err to 0
Initialize err to 0 instead of ENOMEM, and specifically set
err to ENOMEM in the devm_kcalloc() failure cases.

Also, add an error message to the end of reconfig.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:15:21 +01:00
Shannon Nelson
73d618bb7e ionic: print firmware version on identify
Print the version of the DSC firmware seen when we do a fresh
ident check.  Because the FW can be updated by the external
orchestration system, this helps us track that FW has been
updated on the DSC.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:15:21 +01:00
Shannon Nelson
d2662072c0 ionic: monitor fw status generation
The top 4 bits of the fw_status in dev_info_regs is reserved
for the status generation.  This generation number is an
arbitrary value defined when firmware starts up.  If the FW
is killed/crashed/stopped and then restarted, it will create
a different generation number.  With this mechanism, the host
driver can detect that the FW has crashed and restarted, and
the driver can then take steps to re-initialize its connection.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:15:21 +01:00
Shannon Nelson
c0b03e8399 ionic: minimize resources when under kdump
When running in a small kdump kernel, we can play nice and
minimize our resource use to help make sure that kdump is
successful in its mission.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:15:21 +01:00
David S. Miller
7c57706b4b Merge branch 'ndo_ioctl-rework'
Arnd Bergmann says:

====================
ndo_ioctl rework

This series is a follow-up to the series for removing
compat_alloc_user_space() and copy_in_user() that has now
been merged.

I wanted to be sure I address all the ways that 'struct ifreq' is used
in device drivers through .ndo_do_ioctl, originally to prove that
my approach of changing the struct definition was correct, but then
I discarded that approach and went on anyway.

Roughly, the contents here are:

 - split out all the users of SIOCDEVPRIVATE ioctls into a
   separate ndo_siocdevprivate callback, to better see what
   gets used where

 - fix compat handling for those drivers that pass data
   directly inside of 'ifreq' rather than using an indirect
   ifr_data pointer

 - remove unreachable code in ndo_ioctl handlers that relies
   on command codes we never pass into that, in particular
   for wireless drivers

 - split out the ethernet specific ioctls into yet another
   ndo_eth_ioctl callback, as these are by far the most
   common use of ndo_do_ioctl today. I considered splitting
   them further into MII and timestamp controls, but
   went with the simpler change for now.

 - split out bonding and wandev ioctls into separate helpers

 - rework the bridge handling with a separate callback

At this point, only a few oddball things remain in ndo_do_ioctl:
appletalk and ieee802154 pass down SIOCSIFADDR/SIOCGIFADDR and
some wireless drivers have completely dead code.

I have thoroughly compile tested this on randconfig builds,
but not done any notable runtime testing, so please review.
All of it is also available as part of a larger branch at

https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git \
	compat-alloc-user-space-12

Changes since v2:
- rebase to net-next
- fix qeth regression
- Cc driver maintainers for each patch and in cover letter

Changes since v1:

- rebase to linux-5.14-rc2
- add conversion for ndo_siowandev, bridge and bonding drivers
- leave broken wifi drivers untouched for now

Link: https://lore.kernel.org/netdev/20201106221743.3271965-14-arnd@kernel.org/
====================
2021-07-27 20:12:04 +01:00
Arnd Bergmann
3d9d00bd18 net: bonding: move ioctl handling to private ndo operation
All other user triggered operations are gone from ndo_ioctl, so move
the SIOCBOND family into a custom operation as well.

The .ndo_ioctl() helper is no longer called by the dev_ioctl.c code now,
but there are still a few definitions in obsolete wireless drivers as well
as the appletalk and ieee802154 layers to call SIOCSIFADDR/SIOCGIFADDR
helpers from inside the kernel.

Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:11:45 +01:00
Arnd Bergmann
ad2f99aedf net: bridge: move bridge ioctls out of .ndo_do_ioctl
Working towards obsoleting the .ndo_do_ioctl operation entirely,
stop passing the SIOCBRADDIF/SIOCBRDELIF device ioctl commands
into this callback.

My first attempt was to add another ndo_siocbr() callback, but
as there is only a single driver that takes these commands and
there is already a hook mechanism to call directly into this
driver, extend this hook instead, and use it for both the
deviceless and the device specific ioctl commands.

Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: Nikolay Aleksandrov <nikolay@nvidia.com>
Cc: bridge@lists.linux-foundation.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:11:45 +01:00
Arnd Bergmann
88fc023f7d net: socket: return changed ifreq from SIOCDEVPRIVATE
Some drivers that use SIOCDEVPRIVATE ioctl commands modify
the ifreq structure and expect it to be passed back to user
space, which has never really happened for compat mode
because the calling these drivers through ndo_do_ioctl
requires overwriting the ifr_data pointer.

Now that all drivers are converted to ndo_siocdevprivate,
change it to handle this correctly in both compat and
native mode.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:11:45 +01:00
Arnd Bergmann
ad7eab2ab0 net: split out ndo_siowandev ioctl
In order to further reduce the scope of ndo_do_ioctl(), move
out the SIOCWANDEV handling into a new network device operation
function.

Adjust the prototype to only pass the if_settings sub-structure
in place of the ifreq, and remove the redundant 'cmd' argument
in the process.

Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: "Jan \"Yenya\" Kasprzak" <kas@fi.muni.cz>
Cc: Kevin Curtis <kevin.curtis@farsite.co.uk>
Cc: Zhao Qiang <qiang.zhao@nxp.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: linux-x25@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:11:45 +01:00
Arnd Bergmann
a76053707d dev_ioctl: split out ndo_eth_ioctl
Most users of ndo_do_ioctl are ethernet drivers that implement
the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware
timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP.

Separate these from the few drivers that use ndo_do_ioctl to
implement SIOCBOND, SIOCBR and SIOCWANDEV commands.

This is a purely cosmetic change intended to help readers find
their way through the implementation.

Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:11:45 +01:00
Arnd Bergmann
a554bf96b4 dev_ioctl: pass SIOCDEVPRIVATE data separately
The compat handlers for SIOCDEVPRIVATE are incorrect for any driver that
passes data as part of struct ifreq rather than as an ifr_data pointer, or
that passes data back this way, since the compat_ifr_data_ioctl() helper
overwrites the ifr_data pointer and does not copy anything back out.

Since all drivers using devprivate commands are now converted to the
new .ndo_siocdevprivate callback, fix this by adding the missing piece
and passing the pointer separately the whole way.

This further unifies the native and compat logic for socket ioctls,
as the new code now passes the correct pointer as well as the correct
data for both native and compat ioctls.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:11:44 +01:00
Arnd Bergmann
8fb75b79cd wan: cosa: remove dead cosa_net_ioctl() function
The ndo_do_ioctl callback is never called with the COSAIO* commands,
so this is never used. Call the hdlc_ioctl function directly instead.

Any user space code that relied on this function working as intended
has never worked in a mainline kernel since before linux-1.0.

Cc: "Jan \"Yenya\" Kasprzak" <kas@fi.muni.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:11:44 +01:00
Arnd Bergmann
73d74f61a5 wan: use ndo_siocdevprivate
The wan drivers each support some custom SIOCDEVPRIVATE
ioctls, plus the common SIOCWANDEV command.

Split these so the ioctl callback only deals with SIOCWANDEV
and the rest is handled by ndo_siocdevprivate.

It might make sense to also split out SIOCWANDEV into a
separate callback in order to eventually remove ndo_do_ioctl
entirely.

Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Kevin Curtis <kevin.curtis@farsite.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:11:44 +01:00
Arnd Bergmann
34f7cac07c ppp: use ndo_siocdevprivate
ppp has a custom statistics interface using SIOCDEVPRIVATE
ioctl commands that works correctly in compat mode.

Convert it to use ndo_siocdevprivate as a cleanup.

Cc: Paul Mackerras <paulus@samba.org>
Cc: linux-ppp@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:11:44 +01:00
Arnd Bergmann
cc0aa831a0 sb1000: use ndo_siocdevprivate
The private sb1000 ioctl commands all work correctly in
compat mode. Change the to ndo_siocdevprivate as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:11:44 +01:00
Arnd Bergmann
81a68110a2 hippi: use ndo_siocdevprivate
The rr_ioctl uses private ioctl commands that correctly pass
all data through ifr_data, which works fine in compat mode.

Change it to use ndo_siocdevprivate as a cleanup.

Cc: Jes Sorensen <jes@trained-monkey.org>
Cc: linux-hippi@sunsite.dk
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:11:44 +01:00
Arnd Bergmann
3e7a1c7c56 ip_tunnel: use ndo_siocdevprivate
The various ipv4 and ipv6 tunnel drivers each implement a set
of 12 SIOCDEVPRIVATE commands for managing tunnels. These
all work correctly in compat mode.

Move them over to the new .ndo_siocdevprivate operation.

Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:11:44 +01:00
Arnd Bergmann
ae6af0120d airo: use ndo_siocdevprivate
The airo driver overloads SIOCDEVPRIVATE ioctls with another
set based on SIOCIWFIRSTPRIV. Only the first ones actually
work (also in compat mode) as the others do not get passed
down any more.

Change it over to ndo_siocdevprivate for clarification.

Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:11:44 +01:00
Arnd Bergmann
25ec92fbdd hamradio: use ndo_siocdevprivate
hamradio uses a set of private ioctls that do seem to work
correctly in compat mode, as they only rely on the ifr_data
pointer.

Move them over to the ndo_siocdevprivate callback as a cleanup.

Cc: Thomas Sailer <t.sailer@alumni.ethz.ch>
Cc: Joerg Reuter <jreuter@yaina.de>
Cc: Jean-Paul Roubelat <jpr@f6fbb.org>
Cc: linux-hams@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:11:44 +01:00
Arnd Bergmann
ebb4a911e0 cxgb3: use ndo_siocdevprivate
cxgb3 has a private multiplexor that works correctly in compat
mode, split out the siocdevprivate callback from do_ioctl for
simplification.

Cc: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:11:44 +01:00
Arnd Bergmann
18787eeebd qeth: use ndo_siocdevprivate
qeth has both standard MII ioctls and custom SIOCDEVPRIVATE ones,
all of which work correctly with compat user space.

Move the private ones over to the new ndo_siocdevprivate callback.

Cc: Julian Wiedmann <jwi@linux.ibm.com>
Cc: Karsten Graul <kgraul@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:11:44 +01:00
Arnd Bergmann
76b5878cff slip/plip: use ndo_siocdevprivate
slip and plip both use a couple of SIOCDEVPRIVATE ioctl
commands that overload the ifreq layout in a way that is
incompatible with compat mode.

Convert to use ndo_siocdevprivate to allow passing the
data this way, but return an error in compat mode anyway
because the private structure is still incompatible.

This could be fixed as well to make compat work properly.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:11:44 +01:00
Arnd Bergmann
ef1b5b0c30 net: usb: use ndo_siocdevprivate
The pegasus and rtl8150 drivers use SIOCDEVPRIVATE ioctls
to access their MII registers, in place of the normal
commands. This is broken for all compat ioctls today.

Change to ndo_siocdevprivate to fix it.

Cc: Petko Manolov <petkan@nucleusys.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:11:43 +01:00
Arnd Bergmann
043393d8b4 fddi: use ndo_siocdevprivate
The skfddi driver has a private ioctl and passes the data correctly
through ifr_data, but the use of a pointer in s_skfp_ioctl is
broken in compat mode.

Change the driver to use ndo_siocdevprivate and disallow calling
it in compat mode until a conversion handler is added.

Cc: "Maciej W. Rozycki" <macro@orcam.me.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27 20:11:43 +01:00