Commit graph

1,058,063 commits

Author SHA1 Message Date
Shahjada Abul Husain
015fe6fd29 cxgb4: fix IRQ free race during driver unload
IRQs are requested during driver's ndo_open() and then later
freed up in disable_interrupts() during driver unload.
A race exists where driver can set the CXGB4_FULL_INIT_DONE
flag in ndo_open() after the disable_interrupts() in driver
unload path checks it, and hence misses calling free_irq().

Fix by unregistering netdevice first and sync with driver's
ndo_open(). This ensures disable_interrupts() checks the flag
correctly and frees up the IRQs properly.

Fixes: b37987e8db ("cxgb4: Disable interrupts and napi before unregistering netdev")
Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com>
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08 13:34:13 -07:00
Aaron Ma
c342690411 mt76: mt7921: continue to probe driver when fw already downloaded
When reboot system, no power cycles, firmware is already downloaded,
return -EIO will break driver as error:
mt7921e: probe of 0000:03:00.0 failed with error -5

Skip firmware download and continue to probe.

Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Fixes: 1c099ab447 ("mt76: mt7921: add MCU support")
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08 13:33:13 -07:00
Gatis Peisenieks
b9d233ea21 atl1c: fix Mikrotik 10/25G NIC detection
Since Mikrotik 10/25G NIC MDIO op emulation is not 100% reliable,
on rare occasions it can happen that some physical functions of
the NIC do not get initialized due to timeouted early MDIO op.

This changes the atl1c probe on Mikrotik 10/25G NIC not to
depend on MDIO op emulation.

Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08 13:31:43 -07:00
Valentin Schneider
6a942f5780 s390: preempt: Fix preempt_count initialization
S390's init_idle_preempt_count(p, cpu) doesn't actually let us initialize the
preempt_count of the requested CPU's idle task: it unconditionally writes
to the current CPU's. This clearly conflicts with idle_threads_init(),
which intends to initialize *all* the idle tasks, including their
preempt_count (or their CPU's, if the arch uses a per-CPU preempt_count).

Unfortunately, it seems the way s390 does things doesn't let us initialize
every possible CPU's preempt_count early on, as the pages where this
resides are only allocated when a CPU is brought up and are freed when it
is brought down.

Let the arch-specific code set a CPU's preempt_count when its lowcore is
allocated, and turn init_idle_preempt_count() into an empty stub.

Fixes: f1a0a376ca ("sched/core: Initialize the idle task with preemption disabled")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210707163338.1623014-1-valentin.schneider@arm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:18 +02:00
Vasily Gorbik
4ee471fe5a s390/linkage: increase asm symbols alignment to 16
Both clang and gcc (for -march=z13 and later) align functions to 16
bytes at -O2 to benefit branch prediction.

Make asm symbols alignment consistent with that.

This also benefits potential ftrace code patching, which is currently
able to patch 8 aligned bytes at once.

With defconfig this currently increases .text size by 4104 bytes.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:18 +02:00
Heiko Carstens
b55e692e6b s390: rename CALL_ON_STACK_NORETURN() to call_on_stack_noreturn()
Lower case matches the call_on_stack() macro and is easier to read.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:18 +02:00
Heiko Carstens
a9b660849f s390: add type checking to CALL_ON_STACK_NORETURN() macro
Make sure the to be called function takes no arguments (and returns void).
Otherwise usage of CALL_ON_STACK_NORETURN() would generate broken code.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:18 +02:00
Heiko Carstens
60a4813c47 s390: remove old CALL_ON_STACK() macro
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:18 +02:00
Heiko Carstens
b8f4c89fd7 s390/softirq: use call_on_stack() macro
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:18 +02:00
Heiko Carstens
58d4a785da s390/lib: use call_on_stack() macro
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:18 +02:00
Heiko Carstens
0f541cc201 s390/smp: use call_on_stack() macro
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:18 +02:00
Heiko Carstens
845370f47f s390/kexec: use call_on_stack() macro
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:18 +02:00
Heiko Carstens
de556892dc s390/irq: use call_on_stack() macro
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:18 +02:00
Heiko Carstens
7c496e66a2 s390/mm: use call_on_stack() macro
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:18 +02:00
Heiko Carstens
41d71fe59c s390: introduce proper type handling call_on_stack() macro
The existing CALL_ON_STACK() macro allows for subtle bugs:

- There is no type checking of the function that is being called. That
  is: missing or too many arguments do not cause any compile error or
  warning. The same is true if the return type of the called function
  changes. This can lead to quite random bugs.

- Sign and zero extension of arguments is missing. Given that the s390
  C ABI requires that the caller of a function performs proper sign
  and zero extension this can also lead to subtle bugs.

- If arguments to the CALL_ON_STACK() macros contain functions calls
  register corruption can happen due to register asm constructs being
  used.

Therefore introduce a new call_on_stack() macro which is supposed to
fix all these problems.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:17 +02:00
Heiko Carstens
bb250e64e4 s390/irq: simplify on_async_stack()
Make on_async_stack() a bit more readable, even though as usual it
depends if one considers "!!!" readable or not.
At least the new construct to check if the async stack is in use or
not is a bit shorter and generates slightly better code.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:17 +02:00
Heiko Carstens
2ae6521504 s390/irq: inline do_softirq_own_stack()
Move do_softirq_own_stack() to proper header file so it can be
inlined; saving a few cycles.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:17 +02:00
Heiko Carstens
938e02beb3 s390/irq: simplify do_softirq_own_stack()
do_softirq_own_stack() is always called from task context and
therefore it is not necessary to check if the async stack is
currently used.
Remove the check and directly switch to async stack.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:17 +02:00
Harald Freudenberger
4516f355c5 s390/ap: get rid of register asm in ap_dqap()
This is the second part of the cleanup for the header file ap.h
to remove the register asm statements. This patch deals with
the inline ap_dqap() function where within the assembler code
an odd register of an register pair is to be addressed.

[hca@linux.ibm.com: this intentionally breaks compilation with any
 clang compilers prior to llvm-project commit 458eac257377 ("[SystemZ]
 Support the 'N' code for the odd register in inline-asm.").
 This is hopefully the last clang kernel compile breakage caused by
 incompatibilities between gcc and clang.]

Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:17 +02:00
Sven Schnelle
d26a357fe8 s390: rename PIF_SYSCALL_RESTART to PIF_EXECVE_PGSTE_RESTART
PIF_SYSCALL_RESTART is now only used to restart execve when loading
PGSTE binaries. Rename the flag to reflect that, and avoid people
thinking that this bit has anything to do with generic syscall
restarting.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:17 +02:00
Sven Schnelle
e3c7a8d7f4 s390: move restart of execve() syscall
On s390, execve might have to be restarted for PGSTE binaries
like kvm. In the past this was done via the PIF_SYSCALL_RESTART
bit. However, with the recent changes, syscalls are now restarted
differently. Now that execve() is the only call that might get
restarted via PIF_SYSCALL_RESTART, move the loop to do_syscall().
This also has the advantage that the restart is no longer visible
to userspace.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:17 +02:00
Sven Schnelle
fbf50f47ea s390/signal: remove sigreturn on stack
{rt_}sigreturn is now called from the vdso, so we no longer
need the svc on the stack, and therefore no hack to support that
mechanism on machines with non-executable stack.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:17 +02:00
Sven Schnelle
df29a7440c s390/signal: switch to using vdso for sigreturn and syscall restart
with generic entry, there's a bug when it comes to restarting of signals.
The failing sequence is:

a) a signal is coming in, and no handler is registered, so the lower
   part of arch_do_signal_or_restart() in arch/s390/kernel/signal.c
   sets PIF_SYSCALL_RESTART.

b) a second signal gets pending while the kernel is still in the exit
   loop, and for that one, a handler exists.

c) The first part of arch_do_signal_or_restart() is called. That part
   calls handle_signal(), which sets up stack + registers for handling
   the signal.

d) __do_syscall() in arch/s390/kernel/syscall.c checks for
   PIF_SYSCALL_RESTART right before leaving to userspace. If it is set,
   it restart's the syscall. However, the registers are already setup
   for handling a signal from c). The syscall is now restarted with the
   wrong arguments.

Change the code to:

- use vdso for syscall_restart() instead of PIF_SYSCALL_RESTART because
  we cannot rewind and go back to userspace on s390 because the system call
  number might be encoded in the svc instruction.
- for all other syscalls we rewind the PSW and return to userspace.

Cc: <stable@kernel.org> # v5.12+ d57778feb9: s390/vdso: always enable vdso
Cc: <stable@kernel.org> # v5.12+ 686341f254: s390/vdso64: add sigreturn,rt_sigreturn and restart_syscall
Cc: <stable@kernel.org> # v5.12+ 43e1f76b0b: s390/vdso: rename VDSO64_LBASE to VDSO_LBASE
Cc: <stable@kernel.org> # v5.12+ 779df22487: s390/vdso: add minimal compat vdso
Cc: <stable@kernel.org> # v5.12+
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:09:47 +02:00
Pavel Begunkov
8f487ef2cb io_uring: mitigate unlikely iopoll lag
We have requests like IORING_OP_FILES_UPDATE that don't go through
->iopoll_list but get completed in place under ->uring_lock, and so
after dropping the lock io_iopoll_check() should expect that some CQEs
might have get completed in a meanwhile.

Currently such events won't be accounted in @nr_events, and the loop
will continue to poll even if there is enough of CQEs. It shouldn't be a
problem as it's not likely to happen and so, but not nice either. Just
return earlier in this case, it should be enough.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/66ef932cc66a34e3771bbae04b2953a8058e9d05.1625747741.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-08 14:07:43 -06:00
Jonathan Lemon
debdd8e318 ptp: Relocate lookup cookie to correct block.
An earlier commit set the pps_lookup cookie, but the line
was somehow added to the wrong code block.  Correct this.

Fixes: 8602e40fc8 ("ptp: Set lookup cookie when creating a PTP PPS source.")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08 12:33:10 -07:00
Linus Torvalds
f55966571d drm fixes for 5.14-rc1
dma-buf:
 - doc fixes
 
 amdgpu:
 - Misc Navi fixes
 - Powergating fix
 - Yellow Carp updates
 - Beige Goby updates
 - S0ix fix
 - Revert overlay validation fix
 - GPU reset fix for DC
 - PPC64 fix
 - Add new dimgrey cavefish DID
 - RAS fix
 - TTM fixes
 
 amdkfd:
 - SVM fixes
 
 radeon:
 - Fix missing drm_gem_object_put in error path
 - NULL ptr deref fix
 
 i915:
 - display DP VSC fix
 - DG1 display fix
 - IRQ fixes
 - IRQ demidlayering
 
 gma500:
 - bo leaks in error paths fixed
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmDma1oACgkQDHTzWXnE
 hr4l1RAAmUhJbcqPEDGI2Hydl7o4/NMWXyyINYzcuCndeT76+yqdiTVsRQNvmTRO
 MoW8AACjnNc2xktqtbv+hH4/vZinqHQD8z93kk4A+yA6TDzOLdJTnS7XfoKFI/S3
 /lvmwYJgW1nN3TahMI/juTmJanYEnSwVvFVGtRkOEtG7wgomNDYgqdm/NSfmENXV
 6q1rHamzAMoXYFxviST+6jK2kBLFN7jjBAyaVyj4ufnF2CG/oUrsAtdvXpM1QSta
 R1LJ3g43pnOFPpaNtwSlf9wsDQZ0oMSJ2Tt+hLpyhKr+zHVygOBjRR9AGNd/2P6t
 mCQWiYI+B4i0246XDFj6yS/angQHox9/fUYMM+AgExIBH1PAdTE9yZE/JNsNBc/S
 4llmAA/eQco+DM8HQ84BPl8yi9Y3qaUONJJQsejpTf9Cvey5xQ2HnDmPbBACfqd0
 /BxCfhzcJmPxuV5bRh7e/nJt0/Uj83U5f6oQlUImmAdr+t60NnuwxoWV0wt7Uz+0
 v9TkqQ5QE2jpcm56ug8cxOkSKK9U/RDQCfqUY6zSYPMSFu5WL2fOWxJKpyIz9vSo
 E8awltAu59nUT10P/zvzdN64egWrRBwSECg4Bd6I2L9SxfnYuXJwJ+gMObFo0SF5
 cb7KfM2kffxaekf2TashsjEgkrYtCkhh6QMIkDuUOWtIzu4/ikc=
 =HX2N
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2021-07-08-1' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Some fixes for rc1 that came in the past weeks, mainly a bunch of
  amdgpu fixes, some i915 and the rest are misc around the place. I'm
  sending this a bit early so some more stuff may show up, but I'll
  probably take tomorrow off.

  dma-buf:
   - doc fixes

  amdgpu:
   - Misc Navi fixes
   - Powergating fix
   - Yellow Carp updates
   - Beige Goby updates
   - S0ix fix
   - Revert overlay validation fix
   - GPU reset fix for DC
   - PPC64 fix
   - Add new dimgrey cavefish DID
   - RAS fix
   - TTM fixes

  amdkfd:
   - SVM fixes

  radeon:
   - Fix missing drm_gem_object_put in error path
   - NULL ptr deref fix

  i915:
   - display DP VSC fix
   - DG1 display fix
   - IRQ fixes
   - IRQ demidlayering

  gma500:
   - bo leaks in error paths fixed"

* tag 'drm-next-2021-07-08-1' of git://anongit.freedesktop.org/drm/drm: (52 commits)
  drm/i915: Drop all references to DRM IRQ midlayer
  drm/i915: Use the correct IRQ during resume
  drm/i915/display/dg1: Correctly map DPLLs during state readout
  drm/i915/display: Do not zero past infoframes.vsc
  drm/amdgpu: Conditionally reset SDMA RAS error counts
  drm/amdkfd: Maintain svm_bo reference in page->zone_device_data
  drm/amdkfd: add invalid pages debug at vram migration
  drm/amdkfd: skip migration for pages already in VRAM
  drm/amdkfd: skip invalid pages during migrations
  drm/amdkfd: classify and map mixed svm range pages in GPU
  drm/amdkfd: use hmm range fault to get both domain pfns
  drm/amdgpu: get owner ref in validate and map
  drm/amdkfd: set owner ref to svm range prefault
  drm/amdkfd: add owner ref param to get hmm pages
  drm/amdkfd: device pgmap owner at the svm migrate init
  drm/amdkfd: inc counter on child ranges with xnack off
  drm/amd/display: Extend DMUB diagnostic logging to DCN3.1
  drm/amdgpu: Update NV SIMD-per-CU to 2
  drm/amdgpu: add new dimgrey cavefish DID
  drm/amd/pm: skip PrepareMp1ForUnload message in s0ix
  ...
2021-07-08 12:28:15 -07:00
Eric Dumazet
c7bb4b8903 ipv6: tcp: drop silly ICMPv6 packet too big messages
While TCP stack scales reasonably well, there is still one part that
can be used to DDOS it.

IPv6 Packet too big messages have to lookup/insert a new route,
and if abused by attackers, can easily put hosts under high stress,
with many cpus contending on a spinlock while one is stuck in fib6_run_gc()

ip6_protocol_deliver_rcu()
 icmpv6_rcv()
  icmpv6_notify()
   tcp_v6_err()
    tcp_v6_mtu_reduced()
     inet6_csk_update_pmtu()
      ip6_rt_update_pmtu()
       __ip6_rt_update_pmtu()
        ip6_rt_cache_alloc()
         ip6_dst_alloc()
          dst_alloc()
           ip6_dst_gc()
            fib6_run_gc()
             spin_lock_bh() ...

Some of our servers have been hit by malicious ICMPv6 packets
trying to _increase_ the MTU/MSS of TCP flows.

We believe these ICMPv6 packets are a result of a bug in one ISP stack,
since they were blindly sent back for _every_ (small) packet sent to them.

These packets are for one TCP flow:
09:24:36.266491 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.266509 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.316688 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.316704 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.608151 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240

TCP stack can filter some silly requests :

1) MTU below IPV6_MIN_MTU can be filtered early in tcp_v6_err()
2) tcp_v6_mtu_reduced() can drop requests trying to increase current MSS.

This tests happen before the IPv6 routing stack is entered, thus
removing the potential contention and route exhaustion.

Note that IPv6 stack was performing these checks, but too late
(ie : after the route has been added, and after the potential
garbage collect war)

v2: fix typo caught by Martin, thanks !
v3: exports tcp_mtu_to_mss(), caught by David, thanks !

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08 12:27:08 -07:00
Dan Carpenter
1d864f1088 drm/amdgpu: Fix signedness bug in __amdgpu_eeprom_xfer()
The i2c_transfer() function returns negatives or else the number of
messages transferred.  This code does not work because ARRAY_SIZE()
is type size_t and so that means negative values of "r" are type
promoted to high positive values which are greater than the ARRAY_SIZE().

Fix this by changing the < to != which works regardless of type
promotion.

Fixes: 746b584762 ("drm/amdgpu: Fixes to the AMDGPU EEPROM driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 15:18:14 -04:00
Linus Torvalds
8c1bfd7460 pwm: Changes for v5.14-rc1
This contains mostly various fixes, cleanups and some conversions to the
 atomic API. One noteworthy change is that PWM consumers can now pass a
 hint to the PWM core about the PWM usage, enabling PWM providers to
 implement various optimizations.
 
 There's also a fair bit of simplification here with the addition of some
 device-managed helpers as well as unification between the DT and ACPI
 firmware interfaces.
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmDm1xQZHHRoaWVycnku
 cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zoWFAD/91RO2EJTnzdi267AfFtToV
 icMYZxOj0XN3AZ4WTbFkfeTPxCd3Kdg777gc5/NfzJM0nln/aWTf7qHAvMRZsesI
 HNQkRq7gXCMh5QPk44bvYhWseUQqZ3cpW6H878K7ocCox3YpMjeElPdxXTHd3Lth
 pUTE5mVJxw9alxva7p+gvRKvj9YLucQ3NFLjAL8lCUFzLFP0ZZc2O6BoBSQJDCS5
 UN2hfgFfsYlrXxFVJLn/KsrZcF8TNUcRgLNQZ5j/D0snTSaF2QMdQL7UWZbTvOkf
 EEOpS2e1kZJNXA61YcR+AoQrx/ZITjhfkZ65oyWBNummfk3QniuwvMYon/0SPoLV
 6KeyeRTTAL012JeH4AxVC9yuljki+PRnYHrn+wD4CUiBA5dc4+KY+eOJ/FOiroZV
 V4yi7YvUrQuasazN8ucFg4ukGgtctkEyEUskfvkNDOOLAtxn814tn9zuplP0WTw9
 LNg4rxalUS4fxBR13q0RszCb2I03I1sK2Wkia1HcUS/U4qa0fj59zJw0UtFhDVkp
 /sRLLYHb54lIi4jhgdnbSPrhQxJA5B8HD5gX7JVc4ABk/1piWxXIE2sdsvauKqWX
 VCDGAxIkDB0QTcfZ35gHALlG4VqFibJEspaR4abUQKA3cE9aocX5XjRflnEUivVM
 EgUI6zqDRq1PnPnGUblqpA==
 =Hns1
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This contains mostly various fixes, cleanups and some conversions to
  the atomic API. One noteworthy change is that PWM consumers can now
  pass a hint to the PWM core about the PWM usage, enabling PWM
  providers to implement various optimizations.

  There's also a fair bit of simplification here with the addition of
  some device-managed helpers as well as unification between the DT and
  ACPI firmware interfaces"

* tag 'pwm/for-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (50 commits)
  pwm: Remove redundant assignment to pointer pwm
  pwm: ep93xx: Fix read of uninitialized variable ret
  pwm: ep93xx: Prepare clock before using it
  pwm: ep93xx: Unfold legacy callbacks into ep93xx_pwm_apply()
  pwm: ep93xx: Implement .apply callback
  pwm: vt8500: Only unprepare the clock after the pwmchip was removed
  pwm: vt8500: Drop if with an always false condition
  pwm: tegra: Assert reset only after the PWM was unregistered
  pwm: tegra: Don't needlessly enable and disable the clock in .remove()
  pwm: tegra: Don't modify HW state in .remove callback
  pwm: tegra: Drop an if block with an always false condition
  pwm: core: Simplify some devm_*pwm*() functions
  pwm: core: Remove unused devm_pwm_put()
  pwm: core: Unify fwnode checks in the module
  pwm: core: Reuse fwnode_to_pwmchip() in ACPI case
  pwm: core: Convert to use fwnode for matching
  docs: firmware-guide: ACPI: Add a PWM example
  dt-bindings: pwm: pwm-tiecap: Add compatible string for AM64 SoC
  dt-bindings: pwm: pwm-tiecap: Convert to json schema
  pwm: sprd: Don't check the return code of pwmchip_remove()
  ...
2021-07-08 12:18:04 -07:00
Dan Carpenter
3006c92455 drm/amdgpu: fix a signedness bug in __verify_ras_table_checksum()
If amdgpu_eeprom_read() returns a negative error code then the error
handling checks:

	if (res < buf_size) {

The problem is that "buf_size" is a u32 so negative values are type
promoted to a high positive values and the condition is false.  Fix
this by changing the type of "buf_size" to int.

Fixes: 63d4c081a5 ("drm/amdgpu: Optimize EEPROM RAS table I/O")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 15:17:02 -04:00
Aric Cyr
7b101c9548 drm/amd/display: increase max EDID size to 2k
[Why]
EDID CTS requires at least 2k (16 blocks) to be readable.

[How]
Increase EDID buffer size to 2k

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 15:16:52 -04:00
Aric Cyr
babbdf5b3a drm/amd/display: Round KHz up when calculating clock requests
[Why]
When requesting clocks from SMU which takes MHz inputs, DC will round
down KHz when converting to MHz, thus potentially requesting too low a
clock value.

[How]
Round up (ceil) when converting KHz to MHz for clock requests to SMU.

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 15:16:44 -04:00
Aric Cyr
cc590fd271 drm/amd/display: 3.2.142
DC version 3.2.142 brings improvements in multiple areas. In summary, we
highlight:

- Freesync improvements
- Remove unnecessary assert
- Firmware release 0.0.72
- Improve the EDID manipulation and DML calculations

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 15:16:37 -04:00
Anthony Koo
1e0958bb9c drm/amd/display: [FW Promotion] Release 0.0.72
- Updated SCR definition for FW boot options for Separate DCN init
  for DMUB FW loaded in VBL

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 15:16:28 -04:00
Alvin Lee
9f95e77800 drm/amd/display: Adjust types and formatting for future development
Type adjustments and formatting fixes.

Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 15:16:21 -04:00
Dmytro Laktyushkin
cf83f5cf24 drm/amd/display: remove faulty assert
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 15:16:14 -04:00
Wesley Chalmers
f5bfc11e46 Revert "drm/amd/display: Always write repeater mode regardless of LTTPR"
This reverts commit 2b7605d73b

Some displays are not lighting up when put in LTTPR Transparent Mode

Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 15:15:10 -04:00
Nicholas Kazlauskas
9cb2f2df66 drm/amd/display: Fix updating infoframe for DCN3.1 eDP
[Why]
We're only treating TMDS as a valid target for infoframe updates which
results in PSR being unable to transition from state 4 to state 5.

[How]
Also allow infoframe updates for DCN3.1 - following how we handle
this path for earlier ASIC as well.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 15:15:03 -04:00
Stylon Wang
46db138dc8 drm/amd/display: Add Freesync HDMI support to DM with DMUB
[Why]
Changes in DM needed to support Freesync HDMI on DMUB.

[How]
Change implementation to parse CEA blocks in case of DMUB-enabled ASICs.

Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 15:14:55 -04:00
Wang
0713921b4c drm/amd/display: Add null checks
Added NULL checks before two problematic statements

Signed-off-by: Wang <anguwang@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 15:14:47 -04:00
Chun-Liang Chang
556a979d3c drm/amd/display: DMUB Outbound Interrupt Process-X86
[Why]
dmub would notify x86 response time violation by GPINT_DATAOUT

[How]
1. Use GPINT_DATAOUT to trigger x86 interrupt
2. Register GPINT_DATAOUT interrupt handler.
3. Trigger ACR while GPINT_DATAOUT occurred.

Signed-off-by: Chun-Liang Chang <Chun-Liang.Chang@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 15:14:36 -04:00
Wenjing Liu
1bc6c29f58 drm/amd/display: isolate link training setting override to its own function
There is a difference between our default behavior and override
behavior. For default behavior we need to decide link training settings
within specs' limitation and mandates.
For override behavior we do not need to follow all these requirements.
We are isolating override decision to its own function to maintain the
integrity of our specs compliant default behavior.

Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 15:14:29 -04:00
Luben Tuikov
4d9f771e11 drm/amdgpu: Return error if no RAS
In amdgpu_ras_query_error_count() return an error
if the device doesn't support RAS. This prevents
that function from having to always set the values
of the integer pointers (if set), and thus
prevents function side effects--always to have to
set values of integers if integer pointers set,
regardless of whether RAS is supported or
not--with this change this side effect is
mitigated.

Also, if no pointers are set, don't count, since
we've no way of reporting the counts.

Also, give this function a kernel-doc.

Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Reported-by: Tom Rix <trix@redhat.com>
Fixes: a46751fbcd ("drm/amdgpu: Fix RAS function interface")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 15:13:07 -04:00
Jingwen Chen
b5840166dc drm/amdgpu: SRIOV flr_work should take write_lock
[Why]
If flr_work takes read_lock, then other threads who takes
read_lock can access hardware when host is doing vf flr.

[How]
flr_work should take write_lock to avoid this case.

Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 15:12:58 -04:00
Luben Tuikov
c0838d3a93 drm/amdgpu: The I2C IP doesn't support 0 writes/reads
The I2C IP doesn't support writes or reads of 0 bytes.

In order for a START/STOP transaction to take
place on the bus, the data written/read has to be
at least one byte.

That is, you cannot generate a write with 0 bytes,
just to get the ACK from a device, just so you can
probe that device if it is on the bus and so to
discover all devices on the bus--you'll have to
read at least one byte. Writes of 0 bytes generate
no START/STOP on this I2C IP--the bus is not
engaged at all.

Set the I2C_AQ_NO_ZERO_LEN to the existing I2C
quirk tables for Aldebaran, Arcturus, Navi10 and
Sienna Cichlid, and add a quirk table to the I2C
driver which drives the bus when the SMU
doesn't--for instance on Vega20.

Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Lijo Lazar <Lijo.Lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 15:12:51 -04:00
Luben Tuikov
ae87df0775 drm/amd/pm: Add I2C quirk table to Aldebaran
Add I2C quirk table to Aldebaran.

Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Lijo Lazar <Lijo.Lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 15:12:44 -04:00
YuBiao Wang
5af4438f1e drm/amdgpu: Read clock counter via MMIO to reduce delay (v5)
[Why]
GPU timing counters are read via KIQ under sriov, which will introduce
a delay.

[How]
It could be directly read by MMIO.

v2: Add additional check to prevent carryover issue.
v3: Only check for carryover for once to prevent performance issue.
v4: Add comments of the rough frequency where carryover happens.
v5: Remove mutex and gfxoff ctrl unused with current timing registers.

Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Acked-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.co>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 15:12:36 -04:00
Eric Huang
51627f0380 drm/amdkfd: Only apply TLB flush optimization on ALdebaran
It is based on reverting two patches back.
  drm/amdkfd: Make TLB flush conditional on mapping
  drm/amdgpu: Add table_freed parameter to amdgpu_vm_bo_update

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 15:12:26 -04:00
Linus Torvalds
b0dfd9af28 The second batch of clk driver code for -rc1
- A handful of fixes for lmk04832 driver
  - Migrate the basic clk divider to use determine rate ops
  - Fix modpost build for hisilicon hi3559a driver
  - Actually set the parent in k210_clk_set_parent()
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmDmPo0RHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSW+UA/+ID512DVohpldBQ9FPmGJ88SV/wr3fpp1
 pbJC6f3Kwc7pWS913Glj31xpRHtOMOZLbRvFIa2xBuIuP4sWu3QTAdDk9tf8/5hE
 8S7dAKwXoy2n6jVCB87sMXF+Gyd6vzU0KIdjTLX0UuF+U/scejjYAc7j8pQZ3X85
 LWb6+F4B8VQAIwExkiuDlxaaOEs0bJ6fDsj0lpFDivF7feLYmFLAO7gNIIOlQyqb
 3yY8o+dviUoGGplSU0YS9dlkCFMef4LxonqyvoVWOq6d2N3mx16gmKgdR4lpQndl
 oqoA11WPC+kmozwlG0g6g2YyZN8KOSUCgXDSm6vFB79BfR3QNv9tjNY4ybGQs1yF
 DX21n5tb5FKxXNIGWrYQAXjdMuqByCGCZCTDMWdnDx/zawTD507HCEnpQ7okSlOt
 gGsntJFeCwVn9CftmdWnRj5hp88DBa2Fu1GUmRJ86J+BMSte0QBaS5jvEnVt7kRl
 YjI1+eM2pqCqUCxY6MpQvoqvnOf3KOb3kxwuieWuZgIbnig9iN//1I0K4b4XJ1tH
 sTsUtdGxqp/asn0oMfGCurJry2iKZRaAG9XcEaUS2Mji4rvhXn02VSCvXq45iq8J
 efZg6rBnpIxZygfUiSAxgKZNRIS2bnOjNWj8BDBB3dcX/H9x17XTu+irJbRjNUEQ
 BXEgGmWMH+Q=
 =Tk4i
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull more clk updates from Stephen Boyd:

 - A handful of fixes for lmk04832 driver

 - Migrate the basic clk divider to use determine rate ops

 - Fix modpost build for hisilicon hi3559a driver

 - Actually set the parent in k210_clk_set_parent()

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  Revert "clk: divider: Switch from .round_rate to .determine_rate by default"
  clk: hisilicon: hi3559a: Drop __init markings everywhere
  clk: meson: regmap: switch to determine_rate for the dividers
  clk: divider: Switch from .round_rate to .determine_rate by default
  clk: divider: Add re-usable determine_rate implementations
  clk: k210: Fix k210_clk_set_parent()
  clk: lmk04832: Fix spelling mistakes in dev_err messages and comments
  clk: lmk04832: fix return value check in lmk04832_probe()
  clk: stm32mp1: fix missing spin_lock_init()
2021-07-08 12:12:22 -07:00
Nirmoy Das
88f7f88159 drm/amdgpu: separate out vm pasid assignment
Use new helper function amdgpu_vm_set_pasid() to
assign vm pasid value. This also ensures that we don't free
a pasid from vm code as pasids are allocated somewhere else.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 15:12:20 -04:00