We recently fixed an infinite loop by setting the SB_BORN flag on
submounts along with the write barrier needed by super_cache_count().
This is the job of vfs_get_tree() and FUSE shouldn't have to care
about the barrier at all.
Split out some code from fuse_dentry_automount() to the dedicated
fuse_get_tree_submount() handler for submounts and call vfs_get_tree().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The creation of a submount is open-coded in fuse_dentry_automount().
This brings a lot of complexity and we recently had to fix bugs
because we weren't setting SB_BORN or because we were unlocking
sb->s_umount before sb was fully configured. Most of these could
have been avoided by using the mount API instead of open-coding.
Basically, this means coming up with a proper ->get_tree()
implementation for submounts and call vfs_get_tree(), or better
fc_mount().
The creation of the superblock for submounts is quite different from
the root mount. Especially, it doesn't require to allocate a FUSE
filesystem context, nor to parse parameters.
Introduce a dedicated context ops for submounts to make this clear.
This is just a placeholder for now, fuse_get_tree_submount() will
be populated in a subsequent patch.
Only visible change is that we stop allocating/freeing a useless FUSE
filesystem context with submounts.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Even if POSIX doesn't mandate it, linux users legitimately expect sync() to
flush all data and metadata to physical storage when it is located on the
same system. This isn't happening with virtiofs though: sync() inside the
guest returns right away even though data still needs to be flushed from
the host page cache.
This is easily demonstrated by doing the following in the guest:
$ dd if=/dev/zero of=/mnt/foo bs=1M count=5K ; strace -T -e sync sync
5120+0 records in
5120+0 records out
5368709120 bytes (5.4 GB, 5.0 GiB) copied, 5.22224 s, 1.0 GB/s
sync() = 0 <0.024068>
and start the following in the host when the 'dd' command completes
in the guest:
$ strace -T -e fsync /usr/bin/sync virtiofs/foo
fsync(3) = 0 <10.371640>
There are no good reasons not to honor the expected behavior of sync()
actually: it gives an unrealistic impression that virtiofs is super fast
and that data has safely landed on HW, which isn't the case obviously.
Implement a ->sync_fs() superblock operation that sends a new FUSE_SYNCFS
request type for this purpose. Provision a 64-bit placeholder for possible
future extensions. Since the file server cannot handle the wait == 0 case,
we skip it to avoid a gratuitous roundtrip. Note that this is
per-superblock: a FUSE_SYNCFS is send for the root mount and for each
submount.
Like with FUSE_FSYNC and FUSE_FSYNCDIR, lack of support for FUSE_SYNCFS in
the file server is treated as permanent success. This ensures
compatibility with older file servers: the client will get the current
behavior of sync() not being propagated to the file server.
Note that such an operation allows the file server to DoS sync(). Since a
typical FUSE file server is an untrusted piece of software running in
userspace, this is disabled by default. Only enable it with virtiofs for
now since virtiofsd is supposedly trusted by the guest kernel.
Reported-by: Robert Krawitz <rlk@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
A request could end up on the fpq->io list after fuse_abort_conn() has
reset fpq->connected and aborted requests on that list:
Thread-1 Thread-2
======== ========
->fuse_simple_request() ->shutdown
->__fuse_request_send()
->queue_request() ->fuse_abort_conn()
->fuse_dev_do_read() ->acquire(fpq->lock)
->wait_for(fpq->lock) ->set err to all req's in fpq->io
->release(fpq->lock)
->acquire(fpq->lock)
->add req to fpq->io
After the userspace copy is done the request will be ended, but
req->out.h.error will remain uninitialized. Also the copy might block
despite being already aborted.
Fix both issues by not allowing the request to be queued on the fpq->io
list after fuse_abort_conn() has processed this list.
Reported-by: Pradeep P V K <pragalla@codeaurora.org>
Fixes: fd22d62ed0 ("fuse: no fc->lock for iqueue parts")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
replace KSMBD_SHARE_CONFIG_PATH with inline function.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
None of structures needs the attribute.
So remove ____ksmbd_align in ksmbd_server.h.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix overly long line.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use goto instead of duplicating the resoure cleanup in ksmbd_open_fd.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use list_for_each_entry instead of list_for_each.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
vfs_copy_file_range and cifs client already does this type of fallback,
so this is dead code.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Initialize variables on the declaration.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
As vmalloc performance improvement patch for big allocation is merged into
linux kernel, This feature is no longer not needed.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In case of xfrm offload, if xdo_dev_state_add() of driver returns
-EOPNOTSUPP, xfrm offload fallback is failed.
In xfrm state_add() both xso->dev and xso->real_dev are initialized to
dev and when err(-EOPNOTSUPP) is returned only xso->dev is set to null.
So in this scenario the condition in func validate_xmit_xfrm(),
if ((x->xso.dev != dev) && (x->xso.real_dev == dev))
return skb;
returns true, due to which skb is returned without calling esp_xmit()
below which has fallback code. Hence the CRYPTO_FALLBACK is failing.
So fixing this with by keeping x->xso.real_dev as NULL when err is
returned in func xfrm_dev_state_add().
Fixes: bdfd2d1fa7 ("bonding/xfrm: use real_dev instead of slave_dev")
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
QPC, SQC and RQC timestamp formats and capabilities are always equal
because they represent general hardware support. So instead of code
duplication, let's merge them into general enum and logic.
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Since, overlapping mappings are not supported by the DMA API we should
report an error if active_cacheline_insert returns -EEXIST.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring fields.
Instead of using memcpy to read across multiple struct members, just
perform per-member assignments as already done for other members.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The comparisons of the unsigned int hw_type to less than zero always
false because it is unsigned. Fix this by using an int for the
assignment and less than zero check.
Addresses-Coverity: ("Unsigned compared against 0")
Fixes: 9d2df9a0ad80 ("ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Message-Id: <20210616162913.15259-1-colin.king@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Some Aspeed KCS devices can derive the status register address from the
address of the data register. As such, the address of the status
register can be implicit in the configuration if desired. On the other
hand, sometimes address schemes might be requested that are incompatible
with the default addressing scheme. Allow these requests where possible
if the devicetree specifies the status register address.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Message-Id: <20210608104757.582199-17-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Input Buffer Full Interrupt Enable (IBFIE) is typoed as IBFIF for some
registers in the datasheet. Fix the driver to use the sensible acronym.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-16-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Apply the SerIRQ ID and level/sense behaviours from the devicetree if
provided.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-15-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Allocating IO and IRQ resources to LPC devices is in-theory an operation
for the host, however ASPEED don't appear to expose this capability
outside the BMC (e.g. SuperIO). Instead, we are left with BMC-internal
registers for managing these resources, so introduce a devicetree
property for KCS devices to describe SerIRQ properties.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Message-Id: <20210608104757.582199-14-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Given the deprecated binding, improve the ability to detect issues in
the platform devicetrees. Further, a subsequent patch will introduce a
new interrupts property for specifying SerIRQ behaviour, so convert
before we do any further additions.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-13-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
kcs_bmc_serio acts as a bridge between the KCS drivers in the IPMI
subsystem and the existing userspace interfaces available through the
serio subsystem. This is useful when userspace would like to make use of
the BMC KCS devices for purposes that aren't IPMI.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-12-andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This way devices don't get delivered IRQs when no-one is interested.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-11-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Add a mechanism for controlling whether the client associated with a
KCS device will receive Input Buffer Full (IBF) and Output Buffer Empty
(OBE) events. This enables an abstract implementation of poll() for KCS
devices.
A wart in the implementation is that the ASPEED KCS devices don't
support an OBE interrupt for the BMC. Instead we pretend it has one by
polling the status register waiting for the Output Buffer Full (OBF) bit
to clear, and generating an event when OBE is observed.
Cc: CS20 KWLiu <KWLIU@nuvoton.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-10-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Now that we have untangled the data-structures, split the userspace
interface out into its own module. Userspace interfaces and drivers are
registered to the KCS BMC core to support arbitrary binding of either.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-9-andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Move all client-private data out of `struct kcs_bmc` into the KCS client
implementation.
With this change the KCS BMC core code now only concerns itself with
abstract `struct kcs_bmc` and `struct kcs_bmc_client` types, achieving
expected separation of concerns. Further, the change clears the path for
implementation of alternative userspace interfaces.
The chardev data-structures are rearranged in the same manner applied to
the KCS device driver data-structures in an earlier patch - `struct
kcs_bmc_client` is embedded in the client's private data and we exploit
container_of() to translate as required.
Finally, now that it is free of client data, `struct kcs_bmc` is renamed
to `struct kcs_bmc_device` to contrast `struct kcs_bmc_client`.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-8-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Strengthen the distinction between code that abstracts the
implementation of the KCS behaviours (device drivers) and code that
exploits KCS behaviours (clients). Neither needs to know about the APIs
required by the other, so provide separate headers.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-7-andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Make the KCS device drivers responsible for allocating their own memory.
Until now the private data for the device driver was allocated internal
to the private data for the chardev interface. This coupling required
the slightly awkward API of passing through the struct size for the
driver private data to the chardev constructor, and then retrieving a
pointer to the driver private data from the allocated chardev memory.
In addition to being awkward, the arrangement prevents the
implementation of alternative userspace interfaces as the device driver
private data is not independent.
Peel a layer off the onion and turn the data-structures inside out by
exploiting container_of() and embedding `struct kcs_device` in the
driver private data.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-6-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Take steps towards defining a coherent API to separate the KCS device
drivers from the userspace interface. Decreasing the coupling will
improve the separation of concerns and enable the introduction of
alternative userspace interfaces.
For now, simply split the chardev logic out to a separate file. The code
continues to build into the same module.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-5-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Rename the functions in preparation for separating the IPMI chardev out
from the KCS BMC core.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-4-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Enable more efficient implementation of read-modify-write sequences.
Both device drivers for the KCS BMC stack use regmaps. The new callback
allows us to exploit regmap_update_bits().
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-3-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Unpack and remove the aspeed_kcs_probe_of_v[12]() functions to aid
rearranging how the private device-driver memory is allocated.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-2-andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The AGI buffer is in big-endian format, so we must convert the
endianness to CPU format to do any comparisons.
Fixes: 46141dc891 ("xfs: introduce xfs_ag_shrink_space()")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
rxe_mr_init_user() always returns the fixed -EINVAL when ib_umem_get()
fails so it's hard for user to know which actual error happens in
ib_umem_get(). For example, ib_umem_get() will return -EOPNOTSUPP when
trying to pin pages on a DAX file.
Return actual error as mlx4/mlx5 does.
Link: https://lore.kernel.org/r/20210621071456.4259-1-ice_yangxiao@163.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring array fields.
Use the ether_addr_copy() helper instead, as already done for smac.
Link: https://lore.kernel.org/r/20210616203744.1248551-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
With fast memory registration on write request, rnbd-clt
can do bigger IO without split. rnbd-clt now can query
rtrs-clt to get the max_segments, instead of using
BMAX_SEGMENTS.
BMAX_SEGMENTS is not longer needed, so remove it.
Link: https://lore.kernel.org/r/20210621055340.11789-6-jinpu.wang@ionos.com
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
As we can do fast memory registration on write, we can increase
the max_segments, default to 512K.
Link: https://lore.kernel.org/r/20210621055340.11789-5-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
With write path fast memory registration, we need less memory for
each request.
With fast memory registration, we can reduce max_send_sge to save
memory usage.
Also convert the kmalloc_array to kcalloc.
Link: https://lore.kernel.org/r/20210621055340.11789-4-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
With fast memory registration in write path, we can reduce
the memory consumption by using less max_send_sge, support IO bigger
than 116 KB (29 segments * 4 KB) without splitting, and it also
make the IO path more symmetric.
To avoid some times MR reg failed, waiting for the invalidation to finish
before the new mr reg. Introduce a refcount, only finish the request
when both local invalidation and io reply are there.
Link: https://lore.kernel.org/r/20210621055340.11789-3-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Dima Stepanov <dmitrii.stepanov@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Introduce tail wr, we can send as the last wr, we want to send the local
invalidate wr after rdma wr in later patch.
While at it, also fix coding style issue.
Link: https://lore.kernel.org/r/20210621055340.11789-2-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Changing ucontext ABI response structure to pass wqe_mode to user library.
A flag in comp_mask has been set to indicate presence of wqe_mode.
Moved wqe-mode ABI to uapi/rdma/bnxt_re-abi.h
Link: https://lore.kernel.org/r/20210616202817.1185276-1-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
pahole shows two 4-byte holes in struct ib_port_data after pkey_list_lock
and netdev_lock respectively.
Shuffling the netdev_lock to be after pkey_list_lock, this shaves off
eight bytes from the struct.
Link: https://lore.kernel.org/r/20210616154509.1047-3-anand.a.khoje@oracle.com
Suggested-by: Haakon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Anand Khoje <anand.a.khoje@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Removed port validity check from ib_get_cached_subnet_prefix() as this
check is not needed because "port_num" is valid.
Link: https://lore.kernel.org/r/20210616154509.1047-2-anand.a.khoje@oracle.com
Suggested-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Anand Khoje <anand.a.khoje@oracle.com>
Signed-off-by: Haakon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- Remove audio ipg clock from i.MX8MP
- Fix naming typo of clock compatible string
- Remove deprecated legacy clock binding for SCU clock driver
- Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM
- Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif, audio,
parallel interface)
- Add dedicated clock ops for paralel interface
- Different fixes for clocks controlled by ATF
- Fix different issues related to parallel interface clocks
- Add A53/A72 frequency scaling support clk-scu driver
- Add special case for DCSS clock on suspend for clk-scu driver
- Add parent save/restore on suspend/resume to clk-scu driver
- Skip runtime PM enablement for CPU clocks in clk-scu driver
- Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their
bindings
-----BEGIN PGP SIGNATURE-----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=09I6
-----END PGP SIGNATURE-----
Merge tag 'clk-imx-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux into clk-imx
Pull i.MX clk driver updates from Abel Vesa:
- Remove audio ipg clock from i.MX8MP
- Fix naming typo of clock compatible string
- Remove deprecated legacy clock binding for SCU clock driver
- Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM
- Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif, audio,
parallel interface)
- Add dedicated clock ops for paralel interface
- Different fixes for clocks controlled by ATF
- Fix different issues related to parallel interface clocks
- Add A53/A72 frequency scaling support clk-scu driver
- Add special case for DCSS clock on suspend for clk-scu driver
- Add parent save/restore on suspend/resume to clk-scu driver
- Skip runtime PM enablement for CPU clocks in clk-scu driver
- Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their
bindings
* tag 'clk-imx-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux:
clk: imx8mq: remove SYS PLL 1/2 clock gates
clk: imx: scu: Do not enable runtime PM for CPU clks
clk: imx: scu: add parent save and restore
clk: imx: scu: Only save DC SS clock using non-cached clock rate
clk: imx: scu: Add A72 frequency scaling support
clk: imx: scu: Add A53 frequency scaling support
clk: imx: scu: bypass pi_pll enable status restore
clk: imx: scu: detach pd if can't power up
clk: imx: scu: bypass cpu clock save and restore
clk: imx: scu: add parallel port clock ops
clk: imx: scu: add more scu clocks
clk: imx: scu: add enet rgmii gpr clocks
clk: imx8qm: add clock valid resource checking
clk: imx8qxp: add clock valid checking mechnism
clk: imx: scu: add gpr clocks support
clk: imx: scu: remove legacy scu clock binding support
dt-bindings: arm: imx: scu: drop deprecated legacy clock binding
dt-bindings: arm: imx: scu: fix naming typo of clk compatible string
clk: imx: Remove the audio ipg clock from imx8mp
This contains a few fixes across the board and adds stubs to allow
certain drivers to be compile-tested. One other notable change added
here is that clock enabling no longer deasserts the reset. Drivers are
now supposed to do that explicitly because doing it implicitly can get
in the way of certain power-up sequences.
-----BEGIN PGP SIGNATURE-----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=ImGS
-----END PGP SIGNATURE-----
Merge tag 'for-5.14-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-nvidia
Pull Tegra clk driver updates from Thierry Reding:
This contains a few fixes across the board and adds stubs to allow
certain drivers to be compile-tested. One other notable change added
here is that clock enabling no longer deasserts the reset. Drivers are
now supposed to do that explicitly because doing it implicitly can get
in the way of certain power-up sequences.
* tag 'for-5.14-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
clk: tegra: tegra124-emc: Fix clock imbalance in emc_set_timing()
clk: tegra: Add stubs needed for compile-testing
clk: tegra: Don't deassert reset on enabling clocks
clk: tegra: Mark external clocks as not having reset control
clk: tegra: cclk: Handle thermal DIV2 CPU frequency throttling
clk: tegra: Don't allow zero clock rate for PLLs
clk: tegra: Halve SCLK rate on Tegra20
clk: tegra: Ensure that PLLU configuration is applied properly
clk: tegra: Fix refcounting of gate clocks
clk: tegra30: Use 300MHz for video decoder by default