commit 98ea0039db upstream.
Some f2fs sysfs attributes suffer from out-of-bounds memory access and
incorrect handling of integer values whose size is not 4 bytes.
For example:
vm:~# echo 65537 > /sys/fs/f2fs/vde/carve_out
vm:~# cat /sys/fs/f2fs/vde/carve_out
65537
vm:~# echo 4294967297 > /sys/fs/f2fs/vde/atgc_age_threshold
vm:~# cat /sys/fs/f2fs/vde/atgc_age_threshold
1
carve_out maps to {struct f2fs_sb_info}->carve_out, which is a 8-bit
integer. However, the sysfs interface allows setting it to a value
larger than 255, resulting in an out-of-range update.
atgc_age_threshold maps to {struct atgc_management}->age_threshold,
which is a 64-bit integer, but its sysfs interface cannot correctly set
values larger than UINT_MAX.
The root causes are:
1. __sbi_store() treats all default values as unsigned int, which
prevents updating integers larger than 4 bytes and causes out-of-bounds
writes for integers smaller than 4 bytes.
2. f2fs_sbi_show() also assumes all default values are unsigned int,
leading to out-of-bounds reads and incorrect access to integers larger
than 4 bytes.
This patch introduces {struct f2fs_attr}->size to record the actual size
of the integer associated with each sysfs attribute. With this
information, sysfs read and write operations can correctly access and
update values according to their real data size, avoiding memory
corruption and truncation.
Fixes: b59d0bae6c ("f2fs: add sysfs support for controlling the gc_thread")
Cc: stable@kernel.org
Signed-off-by: Jinbao Liu <liujinbao1@xiaomi.com>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7633a7387e upstream.
During SPO tests, when mounting F2FS, an -EINVAL error was returned from
f2fs_recover_inode_page. The issue occurred under the following scenario
Thread A Thread B
f2fs_ioc_commit_atomic_write
- f2fs_do_sync_file // atomic = true
- f2fs_fsync_node_pages
: last_folio = inode folio
: schedule before folio_lock(last_folio) f2fs_write_checkpoint
- block_operations// writeback last_folio
- schedule before f2fs_flush_nat_entries
: set_fsync_mark(last_folio, 1)
: set_dentry_mark(last_folio, 1)
: folio_mark_dirty(last_folio)
- __write_node_folio(last_folio)
: f2fs_down_read(&sbi->node_write)//block
- f2fs_flush_nat_entries
: {struct nat_entry}->flag |= BIT(IS_CHECKPOINTED)
- unblock_operations
: f2fs_up_write(&sbi->node_write)
f2fs_write_checkpoint//return
: f2fs_do_write_node_page()
f2fs_ioc_commit_atomic_write//return
SPO
Thread A calls f2fs_need_dentry_mark(sbi, ino), and the last_folio has
already been written once. However, the {struct nat_entry}->flag did not
have the IS_CHECKPOINTED set, causing set_dentry_mark(last_folio, 1) and
write last_folio again after Thread B finishes f2fs_write_checkpoint.
After SPO and reboot, it was detected that {struct node_info}->blk_addr
was not NULL_ADDR because Thread B successfully write the checkpoint.
This issue only occurs in atomic write scenarios. For regular file
fsync operations, the folio must be dirty. If
block_operations->f2fs_sync_node_pages successfully submit the folio
write, this path will not be executed. Otherwise, the
f2fs_write_checkpoint will need to wait for the folio write submission
to complete, as sbi->nr_pages[F2FS_DIRTY_NODES] > 0. Therefore, the
situation where f2fs_need_dentry_mark checks that the {struct
nat_entry}->flag /wo the IS_CHECKPOINTED flag, but the folio write has
already been submitted, will not occur.
Therefore, for atomic file fsync, sbi->node_write should be acquired
through __write_node_folio to ensure that the IS_CHECKPOINTED flag
correctly indicates that the checkpoint write has been completed.
Fixes: 608514deba ("f2fs: set fsync mark only for the last dnode")
Cc: stable@kernel.org
Signed-off-by: Sheng Yong <shengyong1@xiaomi.com>
Signed-off-by: Jinbao Liu <liujinbao1@xiaomi.com>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 120adae7b4 upstream.
The UFX_IOCTL_REPORT_DAMAGE ioctl does not properly copy data from
userspace to kernelspace, and instead directly references the memory,
which can cause problems if invalid data is passed from userspace. Fix
this all up by correctly copying the memory before accessing it within
the kernel.
Reported-by: Tianchu Chen <flynnnchen@tencent.com>
Cc: stable <stable@kernel.org>
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0209e21e3c upstream.
A userspace program can trigger the RIVA NV3 arbitration code by calling
the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver
recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz
(derived from the PRAMDAC MCLK PLL) as a divisor without validating it
first.
In a normal setup, state->mclk_khz is provided by the real hardware and is
non-zero. However, an attacker can construct a malicious or misconfigured
device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL
configuration, causing state->mclk_khz to become zero. Once
nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns
calculation causes a divide error and crashes the kernel.
Fix this by checking whether state->mclk_khz is zero and bailing out before
doing the division.
The following log reveals it:
rivafb: setting virtual Y resolution to 2184
divide error: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 PID: 2187 Comm: syz-executor.0 Not tainted 5.18.0-rc1+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:nv3_arb drivers/video/fbdev/riva/riva_hw.c:439 [inline]
RIP: 0010:nv3_get_param+0x3ab/0x13b0 drivers/video/fbdev/riva/riva_hw.c:546
Call Trace:
nv3CalcArbitration.constprop.0+0x255/0x460 drivers/video/fbdev/riva/riva_hw.c:603
nv3UpdateArbitrationSettings drivers/video/fbdev/riva/riva_hw.c:637 [inline]
CalcStateExt+0x447/0x1b90 drivers/video/fbdev/riva/riva_hw.c:1246
riva_load_video_mode+0x8a9/0xea0 drivers/video/fbdev/riva/fbdev.c:779
rivafb_set_par+0xc0/0x5f0 drivers/video/fbdev/riva/fbdev.c:1196
fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1033
do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1109
fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1188
__x64_sys_ioctl+0x122/0x190 fs/ioctl.c:856
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit b1bcaed1e3 ("cpuset: Treat cpusets in attaching as populated")
was backported to the long‑term support (LTS) branches. However, because
commit d5cf4d34a3 ("cgroup/cpuset: Don't track # of local child
partitions") was not backported, a corresponding adaptation to the
backported code is still required.
To ensure correct behavior, replace cgroup_is_populated with
cpuset_is_populated in the partition_is_populated function.
Cc: stable@vger.kernel.org # 6.1+
Fixes: b1bcaed1e3 ("cpuset: Treat cpusets in attaching as populated")
Cc: Waiman Long <longman@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ec5ac4ca2 upstream.
kasan_init_generic() indicates that kasan is fully initialized, so it
should be put at end of kasan_init().
Otherwise bringing up the primary CPU failed when CONFIG_KASAN is set
on PTW-enabled systems, here are the call chains:
kernel_entry()
start_kernel()
setup_arch()
kasan_init()
kasan_init_generic()
The reason is PTW-enabled systems have speculative accesses which means
memory accesses to the shadow memory after kasan_init() may be executed
by hardware before. However, accessing shadow memory is safe only after
kasan fully initialized because kasan_init() uses a temporary PGD table
until we have populated all levels of shadow page tables and writen the
PGD register. Moving kasan_init_generic() later can defer the occasion
of kasan_enabled(), so as to avoid speculative accesses on shadow pages.
After moving kasan_init_generic() to the end, kasan_init() can no longer
call kasan_mem_to_shadow() for shadow address conversion because it will
always return kasan_early_shadow_page. On the other hand, we should keep
the current logic of kasan_mem_to_shadow() for both the early and final
stage because there may be instrumentation before kasan_init().
To solve this, we factor out a new mem_to_shadow() function from current
kasan_mem_to_shadow() for the shadow address conversion in kasan_init().
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ce720d5bd upstream.
As reported, ever since commit 1013af4f58 ("mm/hugetlb: fix
huge_pmd_unshare() vs GUP-fast race") we can end up in some situations
where we perform so many IPI broadcasts when unsharing hugetlb PMD page
tables that it severely regresses some workloads.
In particular, when we fork()+exit(), or when we munmap() a large
area backed by many shared PMD tables, we perform one IPI broadcast per
unshared PMD table.
There are two optimizations to be had:
(1) When we process (unshare) multiple such PMD tables, such as during
exit(), it is sufficient to send a single IPI broadcast (as long as
we respect locking rules) instead of one per PMD table.
Locking prevents that any of these PMD tables could get reused before
we drop the lock.
(2) When we are not the last sharer (> 2 users including us), there is
no need to send the IPI broadcast. The shared PMD tables cannot
become exclusive (fully unshared) before an IPI will be broadcasted
by the last sharer.
Concurrent GUP-fast could walk into a PMD table just before we
unshared it. It could then succeed in grabbing a page from the
shared page table even after munmap() etc succeeded (and supressed
an IPI). But there is not difference compared to GUP-fast just
sleeping for a while after grabbing the page and re-enabling IRQs.
Most importantly, GUP-fast will never walk into page tables that are
no-longer shared, because the last sharer will issue an IPI
broadcast.
(if ever required, checking whether the PUD changed in GUP-fast
after grabbing the page like we do in the PTE case could handle
this)
So let's rework PMD sharing TLB flushing + IPI sync to use the mmu_gather
infrastructure so we can implement these optimizations and demystify the
code at least a bit. Extend the mmu_gather infrastructure to be able to
deal with our special hugetlb PMD table sharing implementation.
To make initialization of the mmu_gather easier when working on a single
VMA (in particular, when dealing with hugetlb), provide
tlb_gather_mmu_vma().
We'll consolidate the handling for (full) unsharing of PMD tables in
tlb_unshare_pmd_ptdesc() and tlb_flush_unshared_tables(), and track
in "struct mmu_gather" whether we had (full) unsharing of PMD tables.
Because locking is very special (concurrent unsharing+reuse must be
prevented), we disallow deferring flushing to tlb_finish_mmu() and instead
require an explicit earlier call to tlb_flush_unshared_tables().
From hugetlb code, we call huge_pmd_unshare_flush() where we make sure
that the expected lock protecting us from concurrent unsharing+reuse is
still held.
Check with a VM_WARN_ON_ONCE() in tlb_finish_mmu() that
tlb_flush_unshared_tables() was properly called earlier.
Document it all properly.
Notes about tlb_remove_table_sync_one() interaction with unsharing:
There are two fairly tricky things:
(1) tlb_remove_table_sync_one() is a NOP on architectures without
CONFIG_MMU_GATHER_RCU_TABLE_FREE.
Here, the assumption is that the previous TLB flush would send an
IPI to all relevant CPUs. Careful: some architectures like x86 only
send IPIs to all relevant CPUs when tlb->freed_tables is set.
The relevant architectures should be selecting
MMU_GATHER_RCU_TABLE_FREE, but x86 might not do that in stable
kernels and it might have been problematic before this patch.
Also, the arch flushing behavior (independent of IPIs) is different
when tlb->freed_tables is set. Do we have to enlighten them to also
take care of tlb->unshared_tables? So far we didn't care, so
hopefully we are fine. Of course, we could be setting
tlb->freed_tables as well, but that might then unnecessarily flush
too much, because the semantics of tlb->freed_tables are a bit
fuzzy.
This patch changes nothing in this regard.
(2) tlb_remove_table_sync_one() is not a NOP on architectures with
CONFIG_MMU_GATHER_RCU_TABLE_FREE that actually don't need a sync.
Take x86 as an example: in the common case (!pv, !X86_FEATURE_INVLPGB)
we still issue IPIs during TLB flushes and don't actually need the
second tlb_remove_table_sync_one().
This optimized can be implemented on top of this, by checking e.g., in
tlb_remove_table_sync_one() whether we really need IPIs. But as
described in (1), it really must honor tlb->freed_tables then to
send IPIs to all relevant CPUs.
Notes on TLB flushing changes:
(1) Flushing for non-shared PMD tables
We're converting from flush_hugetlb_tlb_range() to
tlb_remove_huge_tlb_entry(). Given that we properly initialize the
MMU gather in tlb_gather_mmu_vma() to be hugetlb aware, similar to
__unmap_hugepage_range(), that should be fine.
(2) Flushing for shared PMD tables
We're converting from various things (flush_hugetlb_tlb_range(),
tlb_flush_pmd_range(), flush_tlb_range()) to tlb_flush_pmd_range().
tlb_flush_pmd_range() achieves the same that
tlb_remove_huge_tlb_entry() would achieve in these scenarios.
Note that tlb_remove_huge_tlb_entry() also calls
__tlb_remove_tlb_entry(), however that is only implemented on
powerpc, which does not support PMD table sharing.
Similar to (1), tlb_gather_mmu_vma() should make sure that TLB
flushing keeps on working as expected.
Further, note that the ptdesc_pmd_pts_dec() in huge_pmd_share() is not a
concern, as we are holding the i_mmap_lock the whole time, preventing
concurrent unsharing. That ptdesc_pmd_pts_dec() usage will be removed
separately as a cleanup later.
There are plenty more cleanups to be had, but they have to wait until
this is fixed.
[david@kernel.org: fix kerneldoc]
Link: https://lkml.kernel.org/r/f223dd74-331c-412d-93fc-69e360a5006c@kernel.org
Link: https://lkml.kernel.org/r/20251223214037.580860-5-david@kernel.org
Fixes: 1013af4f58 ("mm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race")
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reported-by: "Uschakow, Stanislav" <suschako@amazon.de>
Closes: https://lore.kernel.org/all/4d3878531c76479d9f8ca9789dc6485d@amazon.de/
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be0b304eeb upstream.
The endpoint IDs in the display graph are expected to match the
associated display path number, i.e. all endpoints connected to
mmsys_ep_main must have reg = <0> and all endpoints connected to
mmsys_ep_ext must have reg = <1>.
Add the missing ID to all endpoints in the display graph, based on
mt8365.dtsi as an existing example that does this correctly.
Fixes: e72d63fa05 ("arm64: dts: mediatek: mt8183: Migrate to display controller OF graph")
Reported-by: Evans Jahja <evansjahja13@gmail.com>
Closes: https://lore.kernel.org/linux-mediatek/CAAq5pW9o3itC0G16LnJO7KMAQ_XoqXUpB=cuJ_7e3-H11zKd5Q@mail.gmail.com/
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
[Angelo: Fixed dtbs_check issues]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c62e0658d4 ]
Since commit 9880702d12 ("ACPI: property: Support using strings in
reference properties") it is possible to use strings instead of local
references. This work fine with single GPIO but not with arrays as
acpi_gpio_package_count() didn't handle this case. Update it to handle
strings like local references to cover this case as well.
Signed-off-by: Alban Bedel <alban.bedel@lht.dlh.de>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20260129145944.3372777-1-alban.bedel@lht.dlh.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38cfdd9dd2 ]
Add cond_resched() in those dump loops, just in case a lot of entries
are being dumped. And detect invalid CQ ring head/tail entries, to avoid
iterating more than what is necessary. Generally not an issue, but can be
if things like KASAN or other debugging metrics are enabled.
Reported-by: 是参差 <shicenci@gmail.com>
Link: https://lore.kernel.org/all/PS1PPF7E1D7501FE5631002D242DD89403FAB9BA@PS1PPF7E1D7501F.apcprd02.prod.outlook.com/
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f514248727 ]
fsl_xcvr_activate_ctl() has
lockdep_assert_held(&card->snd_card->controls_rwsem),
but fsl_xcvr_mode_put() calls it without acquiring this lock.
Other callers of fsl_xcvr_activate_ctl() in fsl_xcvr_startup() and
fsl_xcvr_shutdown() properly acquire the lock with down_read()/up_read().
Add the missing down_read()/up_read() calls around fsl_xcvr_activate_ctl()
in fsl_xcvr_mode_put() to fix the lockdep assertion and prevent potential
race conditions when multiple userspace threads access the control.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Link: https://patch.msgid.link/20260202174112.2018402-1-n7l8m4@u.northwestern.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84962445cd ]
There is nothing wrong if in_shaper_func type is DISTRIBUTED POINTS.
Remove the assert placed for a TODO to avoid misinterpretations.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1714dcc4c2)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d25b32aa82 ]
Commit 27fc10d109 ("drm/amd/display: Fix the delta clamping for shaper
LUT") fixed banding when using plane shaper LUT in DCN10 CM helper. The
problem is also present in DCN30 CM helper, fix banding by extending the
same bug delta clamping fix to CM3.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0274a54897)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit daafcc0ef0 ]
The dma_map_sg tracepoint can trigger a perf buffer overflow when
tracing large scatter-gather lists. With devices like virtio-gpu
creating large DRM buffers, nents can exceed 1000 entries, resulting
in:
phys_addrs: 1000 * 8 bytes = 8,000 bytes
dma_addrs: 1000 * 8 bytes = 8,000 bytes
lengths: 1000 * 4 bytes = 4,000 bytes
Total: ~20,000 bytes
This exceeds PERF_MAX_TRACE_SIZE (8192 bytes), causing:
WARNING: CPU: 0 PID: 5497 at kernel/trace/trace_event_perf.c:405
perf buffer not large enough, wanted 24620, have 8192
Cap all three dynamic arrays at 128 entries using min() in the array
size calculation. This ensures arrays are only as large as needed
(up to the cap), avoiding unnecessary memory allocation for small
operations while preventing overflow for large ones.
The tracepoint now records the full nents/ents counts and a truncated
flag so users can see when data has been capped.
Changes in v2:
- Use min(nents, DMA_TRACE_MAX_ENTRIES) for dynamic array sizing
instead of fixed DMA_TRACE_MAX_ENTRIES allocation (feedback from
Steven Rostedt)
- This allocates only what's needed up to the cap, avoiding waste
for small operations
Reported-by: syzbot+28cea38c382fd15e751a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=28cea38c382fd15e751a
Tested-by: syzbot+28cea38c382fd15e751a@syzkaller.appspotmail.com
Signed-off-by: Deepanshu Kartikey <Kartikey406@gmail.com>
Reviwed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260130155215.69737-1-kartikey406@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e77a4081d7 ]
The load detection process for 3-pole jacks requires slightly
updated reference values to ensure an accurate result. Update
the code to apply different tunings for the 3-pole and 4-pole
cases. This also updates the thresholds overall so update the
relevant comments to match.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260130150927.2964664-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43b0b7eff4 ]
The acpi_pcc_hotkey_add() error path leaks sysfs group pcc_attr_group
if platform_device_register_simple() fails for the "panasonic" platform
device.
Address this by making it call sysfs_remove_group() in that case for
the group in question.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3398370.44csPzL39Z@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1425900231 ]
Add a quirk for a Lenovo laptop (SSID: 0x17aa3821) to allow using sidecar
CS35L57 amps with CS42L43 codec.
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260128092410.1540583-1-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b4e00d8e7 ]
The MECHREVO Wujie 15X Pro suffers from spurious IRQ issues related to
the AMD PMC. Add it to the quirk list to use the spurious_8042 fix.
Signed-off-by: gongqi <550230171hxy@gmail.com>
Link: https://patch.msgid.link/20260122155501.376199-4-550230171hxy@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 611c7d2262 ]
Fix the missing mic on HP 200 G2a 16 by adding quirk with the
board ID 8EE4
Signed-off-by: Dirk Su <dirk.su@canonical.com>
Link: https://patch.msgid.link/20260129065038.39349-1-dirk.su@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b641122d3 ]
Add DMI entry for Huawei Matebook D (BOD-WXX9) with HEADPHONE_GPIO
and DMIC quirks.
This device has ES8336 codec with:
- GPIO 16 (headphone-enable) for headphone amplifier control
- GPIO 17 (speakers-enable) for speaker amplifier control
- GPIO 269 for jack detection IRQ
- 2-channel DMIC
Hardware investigation shows that both GPIO 16 and 17 are required
for proper audio routing, as headphones and speakers share the same
physical output (HPOL/HPOR) and are separated only via amplifier
enable signals.
RFC: Seeking advice on GPIO control issue:
GPIO values change in driver (gpiod_get_value() shows logical value
changes) but not physically (debugfs gpio shows no change). The same
gpiod_set_value_cansleep() calls work correctly in probe context with
msleep(), but fail when called from DAPM event callbacks.
Context information from diagnostics:
- in_atomic=0, in_interrupt=0, irqs_disabled=0
- Process context: pipewire
- GPIO 17 (speakers): changes in driver, no physical change
- GPIO 16 (headphone): changes in driver, no physical change
In Windows, audio switching works without visible GPIO changes,
suggesting possible ACPI/firmware involvement.
Any suggestions on how to properly control these GPIOs from DAPM
events would be appreciated.
Signed-off-by: Tagir Garaev <tgaraev653@gmail.com>
Link: https://patch.msgid.link/20260201121728.16597-1-tgaraev653@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe747d7112 ]
In a few places in the Classmate laptop driver, code using the accel
object may run before that object's address is stored in the driver
data of the input device using it.
For example, cmpc_accel_sensitivity_store_v4() is the "show" method
of cmpc_accel_sensitivity_attr_v4 which is added in cmpc_accel_add_v4(),
before calling dev_set_drvdata() for inputdev->dev. If the sysfs
attribute is accessed prematurely, the dev_get_drvdata(&inputdev->dev)
call in in cmpc_accel_sensitivity_store_v4() returns NULL which
leads to a NULL pointer dereference going forward.
Moreover, sysfs attributes using the input device are added before
initializing that device by cmpc_add_acpi_notify_device() and if one
of them is accessed before running that function, a NULL pointer
dereference will occur.
For example, cmpc_accel_sensitivity_attr_v4 is added before calling
cmpc_add_acpi_notify_device() and if it is read prematurely, the
dev_get_drvdata(&acpi->dev) call in cmpc_accel_sensitivity_show_v4()
returns NULL which leads to a NULL pointer dereference going forward.
Fix this by adding NULL pointer checks in all of the relevant places.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/12825381.O9o76ZdvQC@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1beee8d0c2 ]
The variable j is set, however never used in or outside the loop, thus
resulting in dead code.
Building with GCC 16 results in a build error due to
-Werror=unused-but-set-variable= enabled by default.
This patch clean up the dead code and fixes the build error.
Example build log:
drivers/gpu/drm/tegra/sor.c:1867:19: error: variable ‘j’ set but not used [-Werror=unused-but-set-variable=]
1867 | size_t i, j;
| ^
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250901212020.3757519-1-listout@listout.xyz
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab7ad7abb3 ]
romfs_fill_super() ignores the return value of sb_set_blocksize(), which
can fail if the requested block size is incompatible with the block
device's configuration.
This can be triggered by setting a loop device's block size larger than
PAGE_SIZE using ioctl(LOOP_SET_BLOCK_SIZE, 32768), then mounting a romfs
filesystem on that device.
When sb_set_blocksize(sb, ROMBSIZE) is called with ROMBSIZE=4096 but the
device has logical_block_size=32768, bdev_validate_blocksize() fails
because the requested size is smaller than the device's logical block
size. sb_set_blocksize() returns 0 (failure), but romfs ignores this and
continues mounting.
The superblock's block size remains at the device's logical block size
(32768). Later, when sb_bread() attempts I/O with this oversized block
size, it triggers a kernel BUG in folio_set_bh():
kernel BUG at fs/buffer.c:1582!
BUG_ON(size > PAGE_SIZE);
Fix by checking the return value of sb_set_blocksize() and failing the
mount with -EINVAL if it returns 0.
Reported-by: syzbot+9c4e33e12283d9437c25@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9c4e33e12283d9437c25
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Link: https://patch.msgid.link/20260113084037.1167887-1-kartikey406@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 630fbc6e87 ]
If it play a 5s above silence media stream, it will cause silence
detection trigger.
Speaker will make no sound when you use another app to play a stream.
Add this patch will solve this issue.
GPIO2: Mute Hotkey GPIO3: Mic Mute LED
Enable this will turn on hotkey and LED support.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/f4929e137a7949238cc043d861a4d9f8@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6dd0fdc908 ]
ASP_TX5 was incorrectly mapped to a channel value of 3 corrects,
the channel value of 4.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Link: https://patch.msgid.link/20260115192523.1335742-2-rriveram@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 018b211b1d ]
Add ASUS ExpertBook PM1503CDA to the DMI quirks table to enable
internal DMIC support via the ACP6x machine driver.
Signed-off-by: Anatolii Shirykalov <pipocavsobake@gmail.com>
Link: https://patch.msgid.link/20260119145618.3171435-1-pipocavsobake@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4c9f6a782f upstream.
The `auxiliary` and `pci` modules are conditional on
`CONFIG_AUXILIARY_BUS` and `CONFIG_PCI` respectively. When these are
disabled, the intra-doc links to `auxiliary::Driver` and `pci::Driver`
break, causing rustdoc warnings (or errors with `-D warnings`).
error: unresolved link to `kernel::auxiliary::Driver`
--> rust/kernel/driver.rs:82:28
|
82 | //! [`auxiliary::Driver`]: kernel::auxiliary::Driver
| ^^^^^^^^^^^^^^^^^^^^^^^^^ no item named `auxiliary` in module `kernel`
Fix this by making the documentation for these examples conditional on
the corresponding configuration options.
Fixes: 970a7c6878 ("driver: rust: expand documentation for driver infrastructure")
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reported-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Closes: https://lore.kernel.org/rust-for-linux/20251209.151817.744108529426448097.fujita.tomonori@gmail.com/
Link: https://patch.msgid.link/20251227-driver-types-v1-1-1916154fbe5e@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32cb384038 upstream.
The `pci` module is conditional on CONFIG_PCI. When it's disabled, the
intra-doc link to `pci::Device` causes rustdoc warnings:
warning: unresolved link to `::kernel::pci::Device`
--> rust/kernel/dma.rs:30:70
|
30 | /// where the underlying bus is DMA capable, such as [`pci::Device`](::kernel::pci::Device) or
| ^^^^^^^^^^^^^^^^^^^^^ no item named `pci` in module `kernel`
Fix this by making the documentation conditional on CONFIG_PCI.
Fixes: d06d5f66f5 ("rust: dma: implement `dma::Device` trait")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://patch.msgid.link/20251231045728.1912024-1-fujita.tomonori@gmail.com
[ Keep the "such as" part indicating a list of examples; fix typos in
commit message. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9a42f0754 upstream.
The `pci` module is conditional on CONFIG_PCI. When it's disabled, the
intra-doc link to `pci::Device` causes rustdoc warnings:
warning: unresolved link to `kernel::pci::Device`
--> rust/kernel/device.rs:163:22
|
163 | /// [`pci::Device`]: kernel::pci::Device
| ^^^^^^^^^^^^^^^^^^^ no item named `pci` in module `kernel`
|
= note: `#[warn(rustdoc::broken_intra_doc_links)]` on by default
Fix this by making the documentation conditional on CONFIG_PCI.
Fixes: d6e26c1ae4 ("device: rust: expand documentation for Device")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://patch.msgid.link/20251231045728.1912024-2-fujita.tomonori@gmail.com
[ Keep the "such as" part indicating a list of examples; fix typos in
commit message. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 8d76b2488e which is
commit dc23806a7c upstream.
It causes boot regressions on some systems as all of the "fixes" for
drivers are not properly backported yet. Once that is completed, only
then can this be applied, if really necessary given the potential for
explosions, perhaps we might want to wait a few -rc releases first...
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Gui-Dong Han <hanguidong02@gmail.com>
Cc: Qiu-ji Chen <chenqiuji666@gmail.com>
Reported-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/7dfd0e63-a725-4fac-b2a0-f2e621d99d1b@sirena.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 730e5ebff4 upstream.
Commit 11a78b7944 ("ARM: OMAP: MPUIO wake updates") registers the
omap_mpuio_driver from omap_mpuio_init(), which is called from
omap_gpio_probe().
However, it neither makes sense to register drivers from probe()
callbacks of other drivers, nor does the driver core allow registering
drivers with a device lock already being held.
The latter was revealed by commit dc23806a7c ("driver core: enforce
device_lock for driver_match_device()") leading to a potential deadlock
condition described in [1].
Additionally, the omap_mpuio_driver is never unregistered from the
driver core, even if the module is unloaded.
Hence, register the omap_mpuio_driver from the module initcall and
unregister it in module_exit().
Link: https://lore.kernel.org/lkml/DFU7CEPUSG9A.1KKGVW4HIPMSH@kernel.org/ [1]
Fixes: dc23806a7c ("driver core: enforce device_lock for driver_match_device()")
Fixes: 11a78b7944 ("ARM: OMAP: MPUIO wake updates")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260127201725.35883-1-dakr@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 86c946bcc0 upstream.
The driver does not set hw->sta_data_size, which causes mac80211 to
allocate insufficient space for driver private station data in
__sta_info_alloc(). When rtl8xxxu_sta_add() accesses members of
struct rtl8xxxu_sta_info through sta->drv_priv, this results in a
slab-out-of-bounds write.
KASAN report on RISC-V (VisionFive 2) with RTL8192EU adapter:
BUG: KASAN: slab-out-of-bounds in rtl8xxxu_sta_add+0x31c/0x346
Write of size 8 at addr ffffffd6d3e9ae88 by task kworker/u16:0/12
Set hw->sta_data_size to sizeof(struct rtl8xxxu_sta_info) during
probe, similar to how hw->vif_data_size is configured. This ensures
mac80211 allocates sufficient space for the driver's per-station
private data.
Tested on StarFive VisionFive 2 v1.2A board.
Fixes: eef55f1545 ("wifi: rtl8xxxu: support multiple interfaces in {add,remove}_interface()")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Tariq <alitariq45892@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251225115430.13011-1-alitariq45892@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c5c7d06bd upstream.
The asynchronous creation of sub-groups by a delayed work could lead to a
NULL pointer dereference when the driver directory is removed before the
work completes.
The crash can be easily reproduced with the following commands:
# cd /sys/kernel/config/pci_ep/functions/pci_epf_test
# for i in {1..20}; do mkdir test && rmdir test; done
BUG: kernel NULL pointer dereference, address: 0000000000000088
...
Call Trace:
configfs_register_group+0x3d/0x190
pci_epf_cfs_work+0x41/0x110
process_one_work+0x18f/0x350
worker_thread+0x25a/0x3a0
Fix this issue by using configfs_add_default_group() API which does not
have the deadlock problem as configfs_register_group() and does not require
the delayed work handler.
Fixes: e85a2d7837 ("PCI: endpoint: Add support in configfs to associate two EPCs with EPF")
Signed-off-by: Liu Song <liu.song13@zte.com.cn>
[mani: slightly reworded the description and added stable list]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@kernel.org
Link: https://patch.msgid.link/20250710143845409gLM6JdlwPhlHG9iX3F6jK@zte.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52b330799e upstream.
Exynos Virtual Display driver performs memory alloc/free operations
without lock protection, which easily causes concurrency problem.
For example, use-after-free can occur in race scenario like this:
```
CPU0 CPU1 CPU2
---- ---- ----
vidi_connection_ioctl()
if (vidi->connection) // true
drm_edid = drm_edid_alloc(); // alloc drm_edid
...
ctx->raw_edid = drm_edid;
...
drm_mode_getconnector()
drm_helper_probe_single_connector_modes()
vidi_get_modes()
if (ctx->raw_edid) // true
drm_edid_dup(ctx->raw_edid);
if (!drm_edid) // false
...
vidi_connection_ioctl()
if (vidi->connection) // false
drm_edid_free(ctx->raw_edid); // free drm_edid
...
drm_edid_alloc(drm_edid->edid)
kmemdup(edid); // UAF!!
...
```
To prevent these vulns, at least in vidi_context, member variables related
to memory alloc/free should be protected with ctx->lock.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c253e1122 upstream.
We cannot dereference bs->cur when trying to determine if bs->cur
aliases bs->sc->sa.{bno,rmap}_cur after the latter has been freed.
Fix this by sampling before type before any freeing could happen.
The correct temporal ordering was broken when we removed xfs_btnum_t.
Cc: r772577952@gmail.com
Cc: <stable@vger.kernel.org> # v6.9
Fixes: ec793e690f ("xfs: remove xfs_btnum_t")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jiaming Zhang <r772577952@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 148891e950 upstream.
The driver_override_show() function reads the driver_override string
without holding the device_lock. However, driver_override_store() uses
driver_set_override(), which modifies and frees the string while holding
the device_lock.
This can result in a concurrent use-after-free if the string is freed
by the store function while being read by the show function.
Fix this by holding the device_lock around the read operation.
Fixes: 1f86a00c11 ("bus/fsl-mc: add support for 'driver_override' in the mc-bus")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20251202174438.12658-1-hanguidong02@gmail.com
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42b2dab434 upstream.
Issue occurred during a continuous reboot test of several thousand
iterations specific to a fabric topo with dual mode target where it
sends a PLOGI/PRLI and then sends a LOGO. The initiator was also in the
process of discovery and sent a PLOGI to the switch. It then queried a
list of ports logged in via mbx 75h and the GPDB response indicated that
the target was logged in. This caused a mismatch in the states between
the driver and FW. Requery the FW for the state and proceed with the
rest of discovery process.
Fixes: a4239945b8 ("scsi: qla2xxx: Add switch command to simplify fabric discovery")
Cc: stable@vger.kernel.org
Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251210101604.431868-11-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8890bf450e upstream.
System crash seen during load/unload test in a loop.
[105954.384919] RBP: ffff914589838dc0 R08: 0000000000000000 R09: 0000000000000086
[105954.384920] R10: 000000000000000f R11: ffffa31240904be5 R12: ffff914605f868e0
[105954.384921] R13: ffff914605f86910 R14: 0000000000008010 R15: 00000000ddb7c000
[105954.384923] FS: 0000000000000000(0000) GS:ffff9163fec40000(0000) knlGS:0000000000000000
[105954.384925] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[105954.384926] CR2: 000055d31ce1d6a0 CR3: 0000000119f5e001 CR4: 0000000000770ee0
[105954.384928] PKRU: 55555554
[105954.384929] Call Trace:
[105954.384931] <IRQ>
[105954.384934] qla24xx_sp_unmap+0x1f3/0x2a0 [qla2xxx]
[105954.384962] ? qla_async_scan_sp_done+0x114/0x1f0 [qla2xxx]
[105954.384980] ? qla24xx_els_ct_entry+0x4de/0x760 [qla2xxx]
[105954.384999] ? __wake_up_common+0x80/0x190
[105954.385004] ? qla24xx_process_response_queue+0xc2/0xaa0 [qla2xxx]
[105954.385023] ? qla24xx_msix_rsp_q+0x44/0xb0 [qla2xxx]
[105954.385040] ? __handle_irq_event_percpu+0x3d/0x190
[105954.385044] ? handle_irq_event+0x58/0xb0
[105954.385046] ? handle_edge_irq+0x93/0x240
[105954.385050] ? __common_interrupt+0x41/0xa0
[105954.385055] ? common_interrupt+0x3e/0xa0
[105954.385060] ? asm_common_interrupt+0x22/0x40
The root cause of this was that there was a free (dma_free_attrs) in the
interrupt context. There was a device discovery/fabric scan in
progress. A module unload was issued which set the UNLOADING flag. As
part of the discovery, after receiving an interrupt a work queue was
scheduled (which involved a work to be queued). Since the UNLOADING
flag is set, the work item was not allocated and the mapped memory had
to be freed. The free occurred in interrupt context leading to system
crash. Delay the driver unload until the fabric scan is complete to
avoid the crash.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/202512090414.07Waorz0-lkp@intel.com/
Fixes: 783e0dc4f6 ("qla2xxx: Check for device state before unloading the driver.")
Cc: stable@vger.kernel.org
Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251210101604.431868-8-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
