Add the base infrastructure and UAPI for netlink extended ACK
reporting. All "manual" calls to netlink_ack() pass NULL for now and
thus don't get extended ACK reporting.
Big thanks goes to Pablo Neira Ayuso for not only bringing up the
whole topic at netconf (again) but also coming up with the nlattr
passing trick and various other ideas.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When link transitions from LINK_FAIL to LINK_UP, the commit phase is
not called. This leads to an erroneous state causing slave-link state to
get stuck in "going down" state while its speed and duplex are perfectly
fine. This issue is a side-effect of splitting link-set into propose and
commit phases introduced by de77ecd4ef ("bonding: improve link-status
update in mii-monitoring")
This patch fixes these issues by calling commit phase whenever link
state change is proposed.
Fixes: de77ecd4ef ("bonding: improve link-status update in mii-monitoring")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is necessary to provide ethtool support for displaying and
modifying parameters of dwc-xlgmac.
Signed-off-by: Jie Deng <jiedeng@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I have introduced this bug when applying and simplifying Paolo's patch
as we agreed on the list. The original was "x &= ~y; if (z) x |= y;".
Here is the story of a bad workflow:
A maintainer was already testing with the intended change, but it was
applied only to a testing repo on a different machine. When the time
to push tested patches to kvm/next came, he realized that this change
was missing and quickly added it to the maintenance repo, didn't test
again (because the change is trivial, right), and pushed the world to
fire.
Fixes: ae1e2d1082 ("kvm: nVMX: support EPT accessed/dirty bits")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
This adds the serial slave device for the WL1835 Bluetooth interface.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Turns out that the LL protocol and the TI-ST are the same thing AFAICT.
The TI-ST adds firmware loading, GPIO control, and shared access for
NFC, FM radio, etc. For now, we're only implementing what is needed for
BT. This mirrors other drivers like BCM and Intel, but uses the new
serdev bus.
The firmware loading is greatly simplified by using existing
infrastructure to send commands. It may be a bit slower than the
original code using synchronous functions, but the real bottleneck is
likely doing firmware load at 115.2kbps.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: linux-bluetooth@vger.kernel.org
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
There are no users of hci_uart_init_tty, so remove it.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: linux-bluetooth@vger.kernel.org
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Add serial slave device binding for the TI WiLink series of Bluetooth/FM/GPS
devices.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: netdev@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
1. Don't get the metric RTAX_ADVMSS of dst.
There are two reasons.
1) Its caller dst_metric_advmss has already invoke dst_metric_advmss
before invoke default_advmss.
2) The ipv4_default_advmss is used to get the default mss, it should
not try to get the metric like ip6_default_advmss.
2. Use sizeof(tcphdr)+sizeof(iphdr) instead of literal 40.
3. Define one new macro IPV4_MAX_PMTU instead of 65535 according to
RFC 2675, section 5.1.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern says:
====================
rtnetlink: Cleanup user notifications for netdev events
Vlad's recent patch to add the event type to rtnetlink notifications
points out a number of redundant or unnecessary notifications sent to
userspace for events that are essentially internal to the kernel. Trim
the list to put a dent in the notification storm.
v2
- rebased to top of net-next with IFLA_EVENT patch reverted
- dropped removal NETDEV_CHANGEINFODATA since it is intentionally
only to send a message to userspace
- dropped NOTIFY_PEERS since Vlad's says it is needed for macvlans
- add patches to remove NETDEV_CHANGEUPPER and NETDEV_CHANGE_TX_QUEUE_LEN
from the event list
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
NETDEV_CHANGEUPPER is an internal event; do not generate userspace
notifications.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CHANGELOWERSTATE is an internal event; do not generate userspace
notifications.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PRECHANGEUPPER is an internal event; do not generate userspace
notifications.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Changing the master device for a link generates many messages; the one
generated for POST_TYPE_CHANGE is redundant:
[LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master br1 state UNKNOWN group default
link/ether 02:02:02:02:02:03 brd ff:ff:ff:ff:ff:ff
[LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master br1 state UNKNOWN group default
link/ether 02:02:02:02:02:03 brd ff:ff:ff:ff:ff:ff
Remove POST_TYPE_CHANGE from the list of notifiers that generate
notifications.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Changing hardware address generates redundant messages:
[LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
link/ether 02:02:02:02:02:02 brd ff:ff:ff:ff:ff:ff
[LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
link/ether 02:02:02:02:02:02 brd ff:ff:ff:ff:ff:ff
Do not send a notification for the CHANGEADDR notifier.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NETDEV_UDP_TUNNEL_PUSH_INFO is an internal notifier; nothing userspace
can do so don't generate a netlink notification.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Changing MTU on a link currently causes 3 messages to be sent to userspace:
[LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1490 qdisc noqueue state UNKNOWN group default
link/ether f2:52:5c:6d:21:f3 brd ff:ff:ff:ff:ff:ff
[LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
link/ether f2:52:5c:6d:21:f3 brd ff:ff:ff:ff:ff:ff
[LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
link/ether f2:52:5c:6d:21:f3 brd ff:ff:ff:ff:ff:ff
Remove the messages sent for PRE_CHANGE_MTU and CHANGE_MTU netdev events.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dev field of struct fujitsu_bl is assigned in acpi_fujitsu_bl_add(),
but never used afterwards. brightness_changed is set in get_lcd_level()
and then its value is only printed in a debug message, so it does not
influence execution flow. Remove both fields as they are redundant.
Update the aforementioned debug message. Adjust whitespace to make
checkpatch happy.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
The comment for the get_brightness backlight device callback in
include/linux/backlight.h states that it should "return the current
backlight brightness (accounting for power, fb_blank etc.)".
fujitsu-laptop violates that premise by simply returning the value to
which ACPI function GBLL evaluates to. Make sure 0 is returned when
backlight power is turned off.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Any set_lcd_level() call can fail for one of two reasons: either
requested brightness is outside the allowed range or the ACPI method
used for setting brightness level is not available. For
bl_update_status(), the first case is handled by backlight core, which
means bl_update_status() will not even be called if requested brightness
is outside the allowed range. The second case will be logged anyway by
set_lcd_level() itself, so there is no point in generating another
message in bl_update_status(). Remove the superfluous debug message
along with a local variable that is now redundant.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Not all Fujitsu laptops support controlling backlight power through the
FUJ02E3 ACPI device. Remove the debug message informing about a failed
attempt to set backlight power as it may be confusing and the return
value of call_fext_func() is logged anyway.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Due to the way the disable_brightness_adjust module parameter is
currently handled in acpi_fujitsu_bl_add(), it can only be set to either
0 or 1, which effectively makes it a boolean. Emphasize that by
changing module parameter type to bool. Do not announce parameter value
in a debug message as it can be dynamically changed via sysfs and its
current value can also be read from there. Clean up module parameter
description.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
The value of each module parameter can be changed on the fly via sysfs.
However, the current way of handling use_alt_lcd_levels prevents the
user from dynamically switching from a value of 0 or 1 back to
autodetection as the latter is only performed upon ACPI device
instantiation. Fix this by moving autodetection (in a simplified form)
to set_lcd_level() and changing module parameter type to int. Do not
announce autodetection results in a debug message as current value of
use_alt_lcd_levels can simply be read from sysfs. Clarify module
parameter description.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
When using brightness keys and backlight device's sysfs interface
alternately, an incorrect input event might be generated for a
brightness key press. Consider the following sequence of events:
1. Set backlight brightness to 6 using brightness keys.
2. Write 4 to /sys/class/backlight/fujitsu-laptop/brightness.
3. Press the "brightness up" key.
The input event generated in this scenario would be KEY_BRIGHTNESSDOWN,
because before step 3 brightness_level would still be at 6. As the new
brightness level is established using GBLL, it would evaluate to 5
(SBLL/SBL2 sets it to 4 in step 2 and pressing the "brightness up" key
increases it by 1). This in turn would cause acpi_fujitsu_bl_notify()
to observe a 6 -> 5 change, i.e. a decrease in brightness, while screen
brightness would in fact be increased.
Fix this by updating brightness_level in set_lcd_level.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
acpi_execute_simple_method() takes a method parameter which tells it to
look for the given method underneath the given handle, so calling
acpi_get_handle() beforehand is redundant. Replace the call to
acpi_get_handle() with a call to acpi_execute_simple_method(), thus
eliminating the need for a local variable storing the handle. Update
debug message to reflect this change. Also do not assign a default
value to status as it has no influence on execution flow.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Depending on the value of the use_alt_lcd_levels module parameter, one
of two functions is used for setting LCD brightness level. These
functions are almost identical and only differ in the name of the ACPI
method they call. Instead of checking the value of use_alt_lcd_levels
at each call site, move that check to set_lcd_level() and get rid of
set_lcd_level_alt().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Use a managed backlight device to get rid of acpi_fujitsu_bl_remove().
Change the parent of the backlight device from NULL to the FUJ02B1 ACPI
device as the latter is required for the backlight device to work.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
The backlight part of fujitsu-laptop is only used by laptops which are
incapable of using the standard ACPI video interface for handling
brightness changes. Conversely, on laptops which are capable of using
the latter, no vendor-specific ACPI calls should be made unless
explicitly requested by the user. Bail out immediately from
acpi_fujitsu_bl_add() unless using the vendor-specific interface was
either explicitly requested by the user or automatically selected by the
kernel.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Update debug message logged when the acpi_evaluate_integer() call inside
call_fext_func() fails so that it covers a broader set of possible
errors.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
A new call to SCU intel_scu_ipc_raw_command() writes SPTR and DPTR
registers before sending a command.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
For better maintainability and readability introduce a macro
for device ID table.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The driver is bound to the devices based on their PCI IDs.
There is no need to do an additional check.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Device pointer is used as a flag that everything is prepared.
Nevertheless the assignment happened quite before and there is a window
when a caller can get weird results or even crashes since not all fields
are initialized yet.
Rearrange initialization sequence in ->probe() to prepare everything
before use.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There is no point in registering I2C bus notifier if DMI data does not
match.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[andy: updated due to previous patch changed]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
I2C bus has both i2c clients and adapter devices, so we must be careful in
notifier code and verify that we are actually dealing with an i2c client
before using it as such.
Fixes: cef9dd85ac ("platform/x86: add support for devices with Silead...")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[andy: simplified silead_ts_dmi_add_props() change]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Asus laptop X302UA starts up with Wi-Fi disabled,
without a way to enable it. Set wapf=4 to fix the problem.
Signed-off-by: Santeri Toivonen <santeri.toivonen@vatsul.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Rename call_fext_func() arguments so that each argument's name signifies
its role:
- cmd -> func: sub-function to call (flags, buttons etc.),
- arg0 -> op: operation to perform (get, set, get capabilities etc.),
- arg1 -> feature: feature to act on (e.g. which LED), if relevant,
- arg2 -> state: state to set (e.g. LED on or off), if relevant.
Adjust whitespace to make checkpatch happy.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
acpi_evaluate_integer() takes a pathname parameter which contains the
name of the entity to evaluate underneath the given handle, so calling
acpi_get_handle() beforehand is redundant. Replace the call to
acpi_get_handle() with a call to acpi_evaluate_integer(), thus
eliminating the need for a local variable storing the handle. Adjust
whitespace to make checkpatch happy.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Set values of FUNC call parameters in a designated initializer. Do not
initialize status and handle variables as the values these are
initialized to have no influence on execution flow. Use an array
variable instead of the address of the first element of that array.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Remove the keycode[1-5] fields from struct fujitsu_bl as they are not
needed any more as a result of the sparse keymap migration.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Some laptop models need to have different keycodes assigned to hotkey
scancodes. Change the sparse keymap upon a DMI match, before the hotkey
input device is setup.
Instead of using three different callbacks in the DMI match table,
simplify code by using the driver_data field of struct dmi_system_id to
supply the requested keymap to a common callback. Also merge keymaps
for S6410 and S6420 as they are identical.
Rename fujitsu_dmi_table to fujitsu_laptop_dmi_table to emphasize it is
no longer used by the backlight part of fujitsu-laptop. Adjust
whitespace to make checkpatch happy.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Simplify hotkey event generation by using a sparse keymap. As sparse
keymap operates on scancodes instead of keycodes, adjust variable names
and debug messages accordingly.
This patch only handles the default keymap for clarity.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
[dvhart: correct flag passed to call_fext_func in acpi_fujitsu_laptop_notify]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Use a managed input device for hotkey events in order to simplify two
error paths and one cleanup function while also reducing the number of
local variables required. Remove double assignment to make checkpatch
happy.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Simplify error handling in acpi_fujitsu_laptop_add() by moving code
responsible for setting up the input device to a separate function.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Simplify brightness key event generation by using a sparse keymap.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Use a managed input device for brightness events in order to simplify
two error paths and one cleanup function while also reducing the number
of local variables required. Remove double assignment to make
checkpatch happy.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Simplify error handling in acpi_fujitsu_bl_add() by moving code
responsible for setting up the input device to a separate function.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Merge branch 'dell-laptop-changes-for-4.12' of
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds.git
to avoid linux-next merge conflict with dell-laptop.c.
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>